1/*
2 * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
3 * Copyright (c) 2008-2009 Marvell Semiconductor
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 */
10
11#include <linux/delay.h>
12#include <linux/jiffies.h>
13#include <linux/list.h>
14#include <linux/module.h>
15#include <linux/netdevice.h>
16#include <linux/phy.h>
17#include <net/dsa.h>
18#include "mv88e6060.h"
19
20static int reg_read(struct dsa_switch *ds, int addr, int reg)
21{
22	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
23
24	if (bus == NULL)
25		return -EINVAL;
26
27	return mdiobus_read_nested(bus, ds->pd->sw_addr + addr, reg);
28}
29
30#define REG_READ(addr, reg)					\
31	({							\
32		int __ret;					\
33								\
34		__ret = reg_read(ds, addr, reg);		\
35		if (__ret < 0)					\
36			return __ret;				\
37		__ret;						\
38	})
39
40
41static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
42{
43	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
44
45	if (bus == NULL)
46		return -EINVAL;
47
48	return mdiobus_write_nested(bus, ds->pd->sw_addr + addr, reg, val);
49}
50
51#define REG_WRITE(addr, reg, val)				\
52	({							\
53		int __ret;					\
54								\
55		__ret = reg_write(ds, addr, reg, val);		\
56		if (__ret < 0)					\
57			return __ret;				\
58	})
59
60static char *mv88e6060_probe(struct device *host_dev, int sw_addr)
61{
62	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
63	int ret;
64
65	if (bus == NULL)
66		return NULL;
67
68	ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
69	if (ret >= 0) {
70		if (ret == PORT_SWITCH_ID_6060)
71			return "Marvell 88E6060 (A0)";
72		if (ret == PORT_SWITCH_ID_6060_R1 ||
73		    ret == PORT_SWITCH_ID_6060_R2)
74			return "Marvell 88E6060 (B0)";
75		if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
76			return "Marvell 88E6060";
77	}
78
79	return NULL;
80}
81
82static int mv88e6060_switch_reset(struct dsa_switch *ds)
83{
84	int i;
85	int ret;
86	unsigned long timeout;
87
88	/* Set all ports to the disabled state. */
89	for (i = 0; i < MV88E6060_PORTS; i++) {
90		ret = REG_READ(REG_PORT(i), PORT_CONTROL);
91		REG_WRITE(REG_PORT(i), PORT_CONTROL,
92			  ret & ~PORT_CONTROL_STATE_MASK);
93	}
94
95	/* Wait for transmit queues to drain. */
96	usleep_range(2000, 4000);
97
98	/* Reset the switch. */
99	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
100		  GLOBAL_ATU_CONTROL_SWRESET |
101		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
102		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
103
104	/* Wait up to one second for reset to complete. */
105	timeout = jiffies + 1 * HZ;
106	while (time_before(jiffies, timeout)) {
107		ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
108		if (ret & GLOBAL_STATUS_INIT_READY)
109			break;
110
111		usleep_range(1000, 2000);
112	}
113	if (time_after(jiffies, timeout))
114		return -ETIMEDOUT;
115
116	return 0;
117}
118
119static int mv88e6060_setup_global(struct dsa_switch *ds)
120{
121	/* Disable discarding of frames with excessive collisions,
122	 * set the maximum frame size to 1536 bytes, and mask all
123	 * interrupt sources.
124	 */
125	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
126
127	/* Enable automatic address learning, set the address
128	 * database size to 1024 entries, and set the default aging
129	 * time to 5 minutes.
130	 */
131	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
132		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
133		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
134
135	return 0;
136}
137
138static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
139{
140	int addr = REG_PORT(p);
141
142	/* Do not force flow control, disable Ingress and Egress
143	 * Header tagging, disable VLAN tunneling, and set the port
144	 * state to Forwarding.  Additionally, if this is the CPU
145	 * port, enable Ingress and Egress Trailer tagging mode.
146	 */
147	REG_WRITE(addr, PORT_CONTROL,
148		  dsa_is_cpu_port(ds, p) ?
149			PORT_CONTROL_TRAILER |
150			PORT_CONTROL_INGRESS_MODE |
151			PORT_CONTROL_STATE_FORWARDING :
152			PORT_CONTROL_STATE_FORWARDING);
153
154	/* Port based VLAN map: give each port its own address
155	 * database, allow the CPU port to talk to each of the 'real'
156	 * ports, and allow each of the 'real' ports to only talk to
157	 * the CPU port.
158	 */
159	REG_WRITE(addr, PORT_VLAN_MAP,
160		  ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
161		   (dsa_is_cpu_port(ds, p) ?
162			ds->phys_port_mask :
163			BIT(ds->dst->cpu_port)));
164
165	/* Port Association Vector: when learning source addresses
166	 * of packets, add the address to the address database using
167	 * a port bitmap that has only the bit for this port set and
168	 * the other bits clear.
169	 */
170	REG_WRITE(addr, PORT_ASSOC_VECTOR, BIT(p));
171
172	return 0;
173}
174
175static int mv88e6060_setup(struct dsa_switch *ds)
176{
177	int i;
178	int ret;
179
180	ret = mv88e6060_switch_reset(ds);
181	if (ret < 0)
182		return ret;
183
184	/* @@@ initialise atu */
185
186	ret = mv88e6060_setup_global(ds);
187	if (ret < 0)
188		return ret;
189
190	for (i = 0; i < MV88E6060_PORTS; i++) {
191		ret = mv88e6060_setup_port(ds, i);
192		if (ret < 0)
193			return ret;
194	}
195
196	return 0;
197}
198
199static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
200{
201	/* Use the same MAC Address as FD Pause frames for all ports */
202	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 9) | addr[1]);
203	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
204	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
205
206	return 0;
207}
208
209static int mv88e6060_port_to_phy_addr(int port)
210{
211	if (port >= 0 && port < MV88E6060_PORTS)
212		return port;
213	return -1;
214}
215
216static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
217{
218	int addr;
219
220	addr = mv88e6060_port_to_phy_addr(port);
221	if (addr == -1)
222		return 0xffff;
223
224	return reg_read(ds, addr, regnum);
225}
226
227static int
228mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
229{
230	int addr;
231
232	addr = mv88e6060_port_to_phy_addr(port);
233	if (addr == -1)
234		return 0xffff;
235
236	return reg_write(ds, addr, regnum, val);
237}
238
239static struct dsa_switch_driver mv88e6060_switch_driver = {
240	.tag_protocol	= DSA_TAG_PROTO_TRAILER,
241	.probe		= mv88e6060_probe,
242	.setup		= mv88e6060_setup,
243	.set_addr	= mv88e6060_set_addr,
244	.phy_read	= mv88e6060_phy_read,
245	.phy_write	= mv88e6060_phy_write,
246};
247
248static int __init mv88e6060_init(void)
249{
250	register_switch_driver(&mv88e6060_switch_driver);
251	return 0;
252}
253module_init(mv88e6060_init);
254
255static void __exit mv88e6060_cleanup(void)
256{
257	unregister_switch_driver(&mv88e6060_switch_driver);
258}
259module_exit(mv88e6060_cleanup);
260
261MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
262MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
263MODULE_LICENSE("GPL");
264MODULE_ALIAS("platform:mv88e6060");
265