1/* 2 * Copyright (C) 2010-2012 Stephane Grosjean <s.grosjean@peak-system.com> 3 * 4 * CAN driver for PEAK-System PCAN-PC Card 5 * Derived from the PCAN project file driver/src/pcan_pccard.c 6 * Copyright (C) 2006-2010 PEAK System-Technik GmbH 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the version 2 of the GNU General Public License 10 * as published by the Free Software Foundation 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 */ 17#include <linux/kernel.h> 18#include <linux/module.h> 19#include <linux/interrupt.h> 20#include <linux/netdevice.h> 21#include <linux/delay.h> 22#include <linux/timer.h> 23#include <linux/io.h> 24#include <pcmcia/cistpl.h> 25#include <pcmcia/ds.h> 26#include <linux/can.h> 27#include <linux/can/dev.h> 28#include "sja1000.h" 29 30MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>"); 31MODULE_DESCRIPTION("CAN driver for PEAK-System PCAN-PC Cards"); 32MODULE_LICENSE("GPL v2"); 33MODULE_SUPPORTED_DEVICE("PEAK PCAN-PC Card"); 34 35/* PEAK-System PCMCIA driver name */ 36#define PCC_NAME "peak_pcmcia" 37 38#define PCC_CHAN_MAX 2 39 40#define PCC_CAN_CLOCK (16000000 / 2) 41 42#define PCC_MANF_ID 0x0377 43#define PCC_CARD_ID 0x0001 44 45#define PCC_CHAN_SIZE 0x20 46#define PCC_CHAN_OFF(c) ((c) * PCC_CHAN_SIZE) 47#define PCC_COMN_OFF (PCC_CHAN_OFF(PCC_CHAN_MAX)) 48#define PCC_COMN_SIZE 0x40 49 50/* common area registers */ 51#define PCC_CCR 0x00 52#define PCC_CSR 0x02 53#define PCC_CPR 0x04 54#define PCC_SPI_DIR 0x06 55#define PCC_SPI_DOR 0x08 56#define PCC_SPI_ADR 0x0a 57#define PCC_SPI_IR 0x0c 58#define PCC_FW_MAJOR 0x10 59#define PCC_FW_MINOR 0x12 60 61/* CCR bits */ 62#define PCC_CCR_CLK_16 0x00 63#define PCC_CCR_CLK_10 0x01 64#define PCC_CCR_CLK_21 0x02 65#define PCC_CCR_CLK_8 0x03 66#define PCC_CCR_CLK_MASK PCC_CCR_CLK_8 67 68#define PCC_CCR_RST_CHAN(c) (0x01 << ((c) + 2)) 69#define PCC_CCR_RST_ALL (PCC_CCR_RST_CHAN(0) | PCC_CCR_RST_CHAN(1)) 70#define PCC_CCR_RST_MASK PCC_CCR_RST_ALL 71 72/* led selection bits */ 73#define PCC_LED(c) (1 << (c)) 74#define PCC_LED_ALL (PCC_LED(0) | PCC_LED(1)) 75 76/* led state value */ 77#define PCC_LED_ON 0x00 78#define PCC_LED_FAST 0x01 79#define PCC_LED_SLOW 0x02 80#define PCC_LED_OFF 0x03 81 82#define PCC_CCR_LED_CHAN(s, c) ((s) << (((c) + 2) << 1)) 83 84#define PCC_CCR_LED_ON_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_ON, c) 85#define PCC_CCR_LED_FAST_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_FAST, c) 86#define PCC_CCR_LED_SLOW_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_SLOW, c) 87#define PCC_CCR_LED_OFF_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_OFF, c) 88#define PCC_CCR_LED_MASK_CHAN(c) PCC_CCR_LED_OFF_CHAN(c) 89#define PCC_CCR_LED_OFF_ALL (PCC_CCR_LED_OFF_CHAN(0) | \ 90 PCC_CCR_LED_OFF_CHAN(1)) 91#define PCC_CCR_LED_MASK PCC_CCR_LED_OFF_ALL 92 93#define PCC_CCR_INIT (PCC_CCR_CLK_16 | PCC_CCR_RST_ALL | PCC_CCR_LED_OFF_ALL) 94 95/* CSR bits */ 96#define PCC_CSR_SPI_BUSY 0x04 97 98/* time waiting for SPI busy (prevent from infinite loop) */ 99#define PCC_SPI_MAX_BUSY_WAIT_MS 3 100 101/* max count of reading the SPI status register waiting for a change */ 102/* (prevent from infinite loop) */ 103#define PCC_WRITE_MAX_LOOP 1000 104 105/* max nb of int handled by that isr in one shot (prevent from infinite loop) */ 106#define PCC_ISR_MAX_LOOP 10 107 108/* EEPROM chip instruction set */ 109/* note: EEPROM Read/Write instructions include A8 bit */ 110#define PCC_EEP_WRITE(a) (0x02 | (((a) & 0x100) >> 5)) 111#define PCC_EEP_READ(a) (0x03 | (((a) & 0x100) >> 5)) 112#define PCC_EEP_WRDI 0x04 /* EEPROM Write Disable */ 113#define PCC_EEP_RDSR 0x05 /* EEPROM Read Status Register */ 114#define PCC_EEP_WREN 0x06 /* EEPROM Write Enable */ 115 116/* EEPROM Status Register bits */ 117#define PCC_EEP_SR_WEN 0x02 /* EEPROM SR Write Enable bit */ 118#define PCC_EEP_SR_WIP 0x01 /* EEPROM SR Write In Progress bit */ 119 120/* 121 * The board configuration is probably following: 122 * RX1 is connected to ground. 123 * TX1 is not connected. 124 * CLKO is not connected. 125 * Setting the OCR register to 0xDA is a good idea. 126 * This means normal output mode, push-pull and the correct polarity. 127 */ 128#define PCC_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) 129 130/* 131 * In the CDR register, you should set CBP to 1. 132 * You will probably also want to set the clock divider value to 7 133 * (meaning direct oscillator output) because the second SJA1000 chip 134 * is driven by the first one CLKOUT output. 135 */ 136#define PCC_CDR (CDR_CBP | CDR_CLKOUT_MASK) 137 138struct pcan_channel { 139 struct net_device *netdev; 140 unsigned long prev_rx_bytes; 141 unsigned long prev_tx_bytes; 142}; 143 144/* PCAN-PC Card private structure */ 145struct pcan_pccard { 146 struct pcmcia_device *pdev; 147 int chan_count; 148 struct pcan_channel channel[PCC_CHAN_MAX]; 149 u8 ccr; 150 u8 fw_major; 151 u8 fw_minor; 152 void __iomem *ioport_addr; 153 struct timer_list led_timer; 154}; 155 156static struct pcmcia_device_id pcan_table[] = { 157 PCMCIA_DEVICE_MANF_CARD(PCC_MANF_ID, PCC_CARD_ID), 158 PCMCIA_DEVICE_NULL, 159}; 160 161MODULE_DEVICE_TABLE(pcmcia, pcan_table); 162 163static void pcan_set_leds(struct pcan_pccard *card, u8 mask, u8 state); 164 165/* 166 * start timer which controls leds state 167 */ 168static void pcan_start_led_timer(struct pcan_pccard *card) 169{ 170 if (!timer_pending(&card->led_timer)) 171 mod_timer(&card->led_timer, jiffies + HZ); 172} 173 174/* 175 * stop the timer which controls leds state 176 */ 177static void pcan_stop_led_timer(struct pcan_pccard *card) 178{ 179 del_timer_sync(&card->led_timer); 180} 181 182/* 183 * read a sja1000 register 184 */ 185static u8 pcan_read_canreg(const struct sja1000_priv *priv, int port) 186{ 187 return ioread8(priv->reg_base + port); 188} 189 190/* 191 * write a sja1000 register 192 */ 193static void pcan_write_canreg(const struct sja1000_priv *priv, int port, u8 v) 194{ 195 struct pcan_pccard *card = priv->priv; 196 int c = (priv->reg_base - card->ioport_addr) / PCC_CHAN_SIZE; 197 198 /* sja1000 register changes control the leds state */ 199 if (port == SJA1000_MOD) 200 switch (v) { 201 case MOD_RM: 202 /* Reset Mode: set led on */ 203 pcan_set_leds(card, PCC_LED(c), PCC_LED_ON); 204 break; 205 case 0x00: 206 /* Normal Mode: led slow blinking and start led timer */ 207 pcan_set_leds(card, PCC_LED(c), PCC_LED_SLOW); 208 pcan_start_led_timer(card); 209 break; 210 default: 211 break; 212 } 213 214 iowrite8(v, priv->reg_base + port); 215} 216 217/* 218 * read a register from the common area 219 */ 220static u8 pcan_read_reg(struct pcan_pccard *card, int port) 221{ 222 return ioread8(card->ioport_addr + PCC_COMN_OFF + port); 223} 224 225/* 226 * write a register into the common area 227 */ 228static void pcan_write_reg(struct pcan_pccard *card, int port, u8 v) 229{ 230 /* cache ccr value */ 231 if (port == PCC_CCR) { 232 if (card->ccr == v) 233 return; 234 card->ccr = v; 235 } 236 237 iowrite8(v, card->ioport_addr + PCC_COMN_OFF + port); 238} 239 240/* 241 * check whether the card is present by checking its fw version numbers 242 * against values read at probing time. 243 */ 244static inline int pcan_pccard_present(struct pcan_pccard *card) 245{ 246 return ((pcan_read_reg(card, PCC_FW_MAJOR) == card->fw_major) && 247 (pcan_read_reg(card, PCC_FW_MINOR) == card->fw_minor)); 248} 249 250/* 251 * wait for SPI engine while it is busy 252 */ 253static int pcan_wait_spi_busy(struct pcan_pccard *card) 254{ 255 unsigned long timeout = jiffies + 256 msecs_to_jiffies(PCC_SPI_MAX_BUSY_WAIT_MS) + 1; 257 258 /* be sure to read status at least once after sleeping */ 259 while (pcan_read_reg(card, PCC_CSR) & PCC_CSR_SPI_BUSY) { 260 if (time_after(jiffies, timeout)) 261 return -EBUSY; 262 schedule(); 263 } 264 265 return 0; 266} 267 268/* 269 * write data in device eeprom 270 */ 271static int pcan_write_eeprom(struct pcan_pccard *card, u16 addr, u8 v) 272{ 273 u8 status; 274 int err, i; 275 276 /* write instruction enabling write */ 277 pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WREN); 278 err = pcan_wait_spi_busy(card); 279 if (err) 280 goto we_spi_err; 281 282 /* wait until write enabled */ 283 for (i = 0; i < PCC_WRITE_MAX_LOOP; i++) { 284 /* write instruction reading the status register */ 285 pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_RDSR); 286 err = pcan_wait_spi_busy(card); 287 if (err) 288 goto we_spi_err; 289 290 /* get status register value and check write enable bit */ 291 status = pcan_read_reg(card, PCC_SPI_DIR); 292 if (status & PCC_EEP_SR_WEN) 293 break; 294 } 295 296 if (i >= PCC_WRITE_MAX_LOOP) { 297 dev_err(&card->pdev->dev, 298 "stop waiting to be allowed to write in eeprom\n"); 299 return -EIO; 300 } 301 302 /* set address and data */ 303 pcan_write_reg(card, PCC_SPI_ADR, addr & 0xff); 304 pcan_write_reg(card, PCC_SPI_DOR, v); 305 306 /* 307 * write instruction with bit[3] set according to address value: 308 * if addr refers to upper half of the memory array: bit[3] = 1 309 */ 310 pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WRITE(addr)); 311 err = pcan_wait_spi_busy(card); 312 if (err) 313 goto we_spi_err; 314 315 /* wait while write in progress */ 316 for (i = 0; i < PCC_WRITE_MAX_LOOP; i++) { 317 /* write instruction reading the status register */ 318 pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_RDSR); 319 err = pcan_wait_spi_busy(card); 320 if (err) 321 goto we_spi_err; 322 323 /* get status register value and check write in progress bit */ 324 status = pcan_read_reg(card, PCC_SPI_DIR); 325 if (!(status & PCC_EEP_SR_WIP)) 326 break; 327 } 328 329 if (i >= PCC_WRITE_MAX_LOOP) { 330 dev_err(&card->pdev->dev, 331 "stop waiting for write in eeprom to complete\n"); 332 return -EIO; 333 } 334 335 /* write instruction disabling write */ 336 pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WRDI); 337 err = pcan_wait_spi_busy(card); 338 if (err) 339 goto we_spi_err; 340 341 return 0; 342 343we_spi_err: 344 dev_err(&card->pdev->dev, 345 "stop waiting (spi engine always busy) err %d\n", err); 346 347 return err; 348} 349 350static void pcan_set_leds(struct pcan_pccard *card, u8 led_mask, u8 state) 351{ 352 u8 ccr = card->ccr; 353 int i; 354 355 for (i = 0; i < card->chan_count; i++) 356 if (led_mask & PCC_LED(i)) { 357 /* clear corresponding led bits in ccr */ 358 ccr &= ~PCC_CCR_LED_MASK_CHAN(i); 359 /* then set new bits */ 360 ccr |= PCC_CCR_LED_CHAN(state, i); 361 } 362 363 /* real write only if something has changed in ccr */ 364 pcan_write_reg(card, PCC_CCR, ccr); 365} 366 367/* 368 * enable/disable CAN connectors power 369 */ 370static inline void pcan_set_can_power(struct pcan_pccard *card, int onoff) 371{ 372 int err; 373 374 err = pcan_write_eeprom(card, 0, !!onoff); 375 if (err) 376 dev_err(&card->pdev->dev, 377 "failed setting power %s to can connectors (err %d)\n", 378 (onoff) ? "on" : "off", err); 379} 380 381/* 382 * set leds state according to channel activity 383 */ 384static void pcan_led_timer(unsigned long arg) 385{ 386 struct pcan_pccard *card = (struct pcan_pccard *)arg; 387 struct net_device *netdev; 388 int i, up_count = 0; 389 u8 ccr; 390 391 ccr = card->ccr; 392 for (i = 0; i < card->chan_count; i++) { 393 /* default is: not configured */ 394 ccr &= ~PCC_CCR_LED_MASK_CHAN(i); 395 ccr |= PCC_CCR_LED_ON_CHAN(i); 396 397 netdev = card->channel[i].netdev; 398 if (!netdev || !(netdev->flags & IFF_UP)) 399 continue; 400 401 up_count++; 402 403 /* no activity (but configured) */ 404 ccr &= ~PCC_CCR_LED_MASK_CHAN(i); 405 ccr |= PCC_CCR_LED_SLOW_CHAN(i); 406 407 /* if bytes counters changed, set fast blinking led */ 408 if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) { 409 card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes; 410 ccr &= ~PCC_CCR_LED_MASK_CHAN(i); 411 ccr |= PCC_CCR_LED_FAST_CHAN(i); 412 } 413 if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) { 414 card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes; 415 ccr &= ~PCC_CCR_LED_MASK_CHAN(i); 416 ccr |= PCC_CCR_LED_FAST_CHAN(i); 417 } 418 } 419 420 /* write the new leds state */ 421 pcan_write_reg(card, PCC_CCR, ccr); 422 423 /* restart timer (except if no more configured channels) */ 424 if (up_count) 425 mod_timer(&card->led_timer, jiffies + HZ); 426} 427 428/* 429 * interrupt service routine 430 */ 431static irqreturn_t pcan_isr(int irq, void *dev_id) 432{ 433 struct pcan_pccard *card = dev_id; 434 int irq_handled; 435 436 /* prevent from infinite loop */ 437 for (irq_handled = 0; irq_handled < PCC_ISR_MAX_LOOP; irq_handled++) { 438 /* handle shared interrupt and next loop */ 439 int nothing_to_handle = 1; 440 int i; 441 442 /* check interrupt for each channel */ 443 for (i = 0; i < card->chan_count; i++) { 444 struct net_device *netdev; 445 446 /* 447 * check whether the card is present before calling 448 * sja1000_interrupt() to speed up hotplug detection 449 */ 450 if (!pcan_pccard_present(card)) { 451 /* card unplugged during isr */ 452 return IRQ_NONE; 453 } 454 455 /* 456 * should check whether all or SJA1000_MAX_IRQ 457 * interrupts have been handled: loop again to be sure. 458 */ 459 netdev = card->channel[i].netdev; 460 if (netdev && 461 sja1000_interrupt(irq, netdev) == IRQ_HANDLED) 462 nothing_to_handle = 0; 463 } 464 465 if (nothing_to_handle) 466 break; 467 } 468 469 return (irq_handled) ? IRQ_HANDLED : IRQ_NONE; 470} 471 472/* 473 * free all resources used by the channels and switch off leds and can power 474 */ 475static void pcan_free_channels(struct pcan_pccard *card) 476{ 477 int i; 478 u8 led_mask = 0; 479 480 for (i = 0; i < card->chan_count; i++) { 481 struct net_device *netdev; 482 char name[IFNAMSIZ]; 483 484 led_mask |= PCC_LED(i); 485 486 netdev = card->channel[i].netdev; 487 if (!netdev) 488 continue; 489 490 strncpy(name, netdev->name, IFNAMSIZ); 491 492 unregister_sja1000dev(netdev); 493 494 free_sja1000dev(netdev); 495 496 dev_info(&card->pdev->dev, "%s removed\n", name); 497 } 498 499 /* do it only if device not removed */ 500 if (pcan_pccard_present(card)) { 501 pcan_set_leds(card, led_mask, PCC_LED_OFF); 502 pcan_set_can_power(card, 0); 503 } 504} 505 506/* 507 * check if a CAN controller is present at the specified location 508 */ 509static inline int pcan_channel_present(struct sja1000_priv *priv) 510{ 511 /* make sure SJA1000 is in reset mode */ 512 pcan_write_canreg(priv, SJA1000_MOD, 1); 513 pcan_write_canreg(priv, SJA1000_CDR, CDR_PELICAN); 514 515 /* read reset-values */ 516 if (pcan_read_canreg(priv, SJA1000_CDR) == CDR_PELICAN) 517 return 1; 518 519 return 0; 520} 521 522static int pcan_add_channels(struct pcan_pccard *card) 523{ 524 struct pcmcia_device *pdev = card->pdev; 525 int i, err = 0; 526 u8 ccr = PCC_CCR_INIT; 527 528 /* init common registers (reset channels and leds off) */ 529 card->ccr = ~ccr; 530 pcan_write_reg(card, PCC_CCR, ccr); 531 532 /* wait 2ms before unresetting channels */ 533 mdelay(2); 534 535 ccr &= ~PCC_CCR_RST_ALL; 536 pcan_write_reg(card, PCC_CCR, ccr); 537 538 /* create one network device per channel detected */ 539 for (i = 0; i < ARRAY_SIZE(card->channel); i++) { 540 struct net_device *netdev; 541 struct sja1000_priv *priv; 542 543 netdev = alloc_sja1000dev(0); 544 if (!netdev) { 545 err = -ENOMEM; 546 break; 547 } 548 549 /* update linkages */ 550 priv = netdev_priv(netdev); 551 priv->priv = card; 552 SET_NETDEV_DEV(netdev, &pdev->dev); 553 netdev->dev_id = i; 554 555 priv->irq_flags = IRQF_SHARED; 556 netdev->irq = pdev->irq; 557 priv->reg_base = card->ioport_addr + PCC_CHAN_OFF(i); 558 559 /* check if channel is present */ 560 if (!pcan_channel_present(priv)) { 561 dev_err(&pdev->dev, "channel %d not present\n", i); 562 free_sja1000dev(netdev); 563 continue; 564 } 565 566 priv->read_reg = pcan_read_canreg; 567 priv->write_reg = pcan_write_canreg; 568 priv->can.clock.freq = PCC_CAN_CLOCK; 569 priv->ocr = PCC_OCR; 570 priv->cdr = PCC_CDR; 571 572 /* Neither a slave device distributes the clock */ 573 if (i > 0) 574 priv->cdr |= CDR_CLK_OFF; 575 576 priv->flags |= SJA1000_CUSTOM_IRQ_HANDLER; 577 578 /* register SJA1000 device */ 579 err = register_sja1000dev(netdev); 580 if (err) { 581 free_sja1000dev(netdev); 582 continue; 583 } 584 585 card->channel[i].netdev = netdev; 586 card->chan_count++; 587 588 /* set corresponding led on in the new ccr */ 589 ccr &= ~PCC_CCR_LED_OFF_CHAN(i); 590 591 dev_info(&pdev->dev, 592 "%s on channel %d at 0x%p irq %d\n", 593 netdev->name, i, priv->reg_base, pdev->irq); 594 } 595 596 /* write new ccr (change leds state) */ 597 pcan_write_reg(card, PCC_CCR, ccr); 598 599 return err; 600} 601 602static int pcan_conf_check(struct pcmcia_device *pdev, void *priv_data) 603{ 604 pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 605 pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* only */ 606 pdev->io_lines = 10; 607 608 /* This reserves IO space but doesn't actually enable it */ 609 return pcmcia_request_io(pdev); 610} 611 612/* 613 * free all resources used by the device 614 */ 615static void pcan_free(struct pcmcia_device *pdev) 616{ 617 struct pcan_pccard *card = pdev->priv; 618 619 if (!card) 620 return; 621 622 free_irq(pdev->irq, card); 623 pcan_stop_led_timer(card); 624 625 pcan_free_channels(card); 626 627 ioport_unmap(card->ioport_addr); 628 629 kfree(card); 630 pdev->priv = NULL; 631} 632 633/* 634 * setup PCMCIA socket and probe for PEAK-System PC-CARD 635 */ 636static int pcan_probe(struct pcmcia_device *pdev) 637{ 638 struct pcan_pccard *card; 639 int err; 640 641 pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; 642 643 err = pcmcia_loop_config(pdev, pcan_conf_check, NULL); 644 if (err) { 645 dev_err(&pdev->dev, "pcmcia_loop_config() error %d\n", err); 646 goto probe_err_1; 647 } 648 649 if (!pdev->irq) { 650 dev_err(&pdev->dev, "no irq assigned\n"); 651 err = -ENODEV; 652 goto probe_err_1; 653 } 654 655 err = pcmcia_enable_device(pdev); 656 if (err) { 657 dev_err(&pdev->dev, "pcmcia_enable_device failed err=%d\n", 658 err); 659 goto probe_err_1; 660 } 661 662 card = kzalloc(sizeof(struct pcan_pccard), GFP_KERNEL); 663 if (!card) { 664 err = -ENOMEM; 665 goto probe_err_2; 666 } 667 668 card->pdev = pdev; 669 pdev->priv = card; 670 671 /* sja1000 api uses iomem */ 672 card->ioport_addr = ioport_map(pdev->resource[0]->start, 673 resource_size(pdev->resource[0])); 674 if (!card->ioport_addr) { 675 dev_err(&pdev->dev, "couldn't map io port into io memory\n"); 676 err = -ENOMEM; 677 goto probe_err_3; 678 } 679 card->fw_major = pcan_read_reg(card, PCC_FW_MAJOR); 680 card->fw_minor = pcan_read_reg(card, PCC_FW_MINOR); 681 682 /* display board name and firware version */ 683 dev_info(&pdev->dev, "PEAK-System pcmcia card %s fw %d.%d\n", 684 pdev->prod_id[1] ? pdev->prod_id[1] : "PCAN-PC Card", 685 card->fw_major, card->fw_minor); 686 687 /* detect available channels */ 688 pcan_add_channels(card); 689 if (!card->chan_count) { 690 err = -ENOMEM; 691 goto probe_err_4; 692 } 693 694 /* init the timer which controls the leds */ 695 init_timer(&card->led_timer); 696 card->led_timer.function = pcan_led_timer; 697 card->led_timer.data = (unsigned long)card; 698 699 /* request the given irq */ 700 err = request_irq(pdev->irq, &pcan_isr, IRQF_SHARED, PCC_NAME, card); 701 if (err) { 702 dev_err(&pdev->dev, "couldn't request irq%d\n", pdev->irq); 703 goto probe_err_5; 704 } 705 706 /* power on the connectors */ 707 pcan_set_can_power(card, 1); 708 709 return 0; 710 711probe_err_5: 712 /* unregister can devices from network */ 713 pcan_free_channels(card); 714 715probe_err_4: 716 ioport_unmap(card->ioport_addr); 717 718probe_err_3: 719 kfree(card); 720 pdev->priv = NULL; 721 722probe_err_2: 723 pcmcia_disable_device(pdev); 724 725probe_err_1: 726 return err; 727} 728 729/* 730 * release claimed resources 731 */ 732static void pcan_remove(struct pcmcia_device *pdev) 733{ 734 pcan_free(pdev); 735 pcmcia_disable_device(pdev); 736} 737 738static struct pcmcia_driver pcan_driver = { 739 .name = PCC_NAME, 740 .probe = pcan_probe, 741 .remove = pcan_remove, 742 .id_table = pcan_table, 743}; 744module_pcmcia_driver(pcan_driver); 745