1/* 2 * MTD map driver for BIOS Flash on Intel SCB2 boards 3 * Copyright (C) 2002 Sun Microsystems, Inc. 4 * Tim Hockin <thockin@sun.com> 5 * 6 * A few notes on this MTD map: 7 * 8 * This was developed with a small number of SCB2 boards to test on. 9 * Hopefully, Intel has not introducted too many unaccounted variables in the 10 * making of this board. 11 * 12 * The BIOS marks its own memory region as 'reserved' in the e820 map. We 13 * try to request it here, but if it fails, we carry on anyway. 14 * 15 * This is how the chip is attached, so said the schematic: 16 * * a 4 MiB (32 Mib) 16 bit chip 17 * * a 1 MiB memory region 18 * * A20 and A21 pulled up 19 * * D8-D15 ignored 20 * What this means is that, while we are addressing bytes linearly, we are 21 * really addressing words, and discarding the other byte. This means that 22 * the chip MUST BE at least 2 MiB. This also means that every block is 23 * actually half as big as the chip reports. It also means that accesses of 24 * logical address 0 hit higher-address sections of the chip, not physical 0. 25 * One can only hope that these 4MiB x16 chips were a lot cheaper than 1MiB x8 26 * chips. 27 * 28 * This driver assumes the chip is not write-protected by an external signal. 29 * As of the this writing, that is true, but may change, just to spite me. 30 * 31 * The actual BIOS layout has been mostly reverse engineered. Intel BIOS 32 * updates for this board include 10 related (*.bio - &.bi9) binary files and 33 * another separate (*.bbo) binary file. The 10 files are 64k of data + a 34 * small header. If the headers are stripped off, the 10 64k files can be 35 * concatenated into a 640k image. This is your BIOS image, proper. The 36 * separate .bbo file also has a small header. It is the 'Boot Block' 37 * recovery BIOS. Once the header is stripped, no further prep is needed. 38 * As best I can tell, the BIOS is arranged as such: 39 * offset 0x00000 to 0x4ffff (320k): unknown - SCSI BIOS, etc? 40 * offset 0x50000 to 0xeffff (640k): BIOS proper 41 * offset 0xf0000 ty 0xfffff (64k): Boot Block region 42 * 43 * Intel's BIOS update program flashes the BIOS and Boot Block in separate 44 * steps. Probably a wise thing to do. 45 */ 46 47#include <linux/module.h> 48#include <linux/types.h> 49#include <linux/kernel.h> 50#include <asm/io.h> 51#include <linux/mtd/mtd.h> 52#include <linux/mtd/map.h> 53#include <linux/mtd/cfi.h> 54#include <linux/pci.h> 55#include <linux/pci_ids.h> 56 57#define MODNAME "scb2_flash" 58#define SCB2_ADDR 0xfff00000 59#define SCB2_WINDOW 0x00100000 60 61 62static void __iomem *scb2_ioaddr; 63static struct mtd_info *scb2_mtd; 64static struct map_info scb2_map = { 65 .name = "SCB2 BIOS Flash", 66 .size = 0, 67 .bankwidth = 1, 68}; 69static int region_fail; 70 71static int scb2_fixup_mtd(struct mtd_info *mtd) 72{ 73 int i; 74 int done = 0; 75 struct map_info *map = mtd->priv; 76 struct cfi_private *cfi = map->fldrv_priv; 77 78 /* barf if this doesn't look right */ 79 if (cfi->cfiq->InterfaceDesc != CFI_INTERFACE_X16_ASYNC) { 80 printk(KERN_ERR MODNAME ": unsupported InterfaceDesc: %#x\n", 81 cfi->cfiq->InterfaceDesc); 82 return -1; 83 } 84 85 /* I wasn't here. I didn't see. dwmw2. */ 86 87 /* the chip is sometimes bigger than the map - what a waste */ 88 mtd->size = map->size; 89 90 /* 91 * We only REALLY get half the chip, due to the way it is 92 * wired up - D8-D15 are tossed away. We read linear bytes, 93 * but in reality we are getting 1/2 of each 16-bit read, 94 * which LOOKS linear to us. Because CFI code accounts for 95 * things like lock/unlock/erase by eraseregions, we need to 96 * fudge them to reflect this. Erases go like this: 97 * * send an erase to an address 98 * * the chip samples the address and erases the block 99 * * add the block erasesize to the address and repeat 100 * -- the problem is that addresses are 16-bit addressable 101 * -- we end up erasing every-other block 102 */ 103 mtd->erasesize /= 2; 104 for (i = 0; i < mtd->numeraseregions; i++) { 105 struct mtd_erase_region_info *region = &mtd->eraseregions[i]; 106 region->erasesize /= 2; 107 } 108 109 /* 110 * If the chip is bigger than the map, it is wired with the high 111 * address lines pulled up. This makes us access the top portion of 112 * the chip, so all our erase-region info is wrong. Start cutting from 113 * the bottom. 114 */ 115 for (i = 0; !done && i < mtd->numeraseregions; i++) { 116 struct mtd_erase_region_info *region = &mtd->eraseregions[i]; 117 118 if (region->numblocks * region->erasesize > mtd->size) { 119 region->numblocks = ((unsigned long)mtd->size / 120 region->erasesize); 121 done = 1; 122 } else { 123 region->numblocks = 0; 124 } 125 region->offset = 0; 126 } 127 128 return 0; 129} 130 131/* CSB5's 'Function Control Register' has bits for decoding @ >= 0xffc00000 */ 132#define CSB5_FCR 0x41 133#define CSB5_FCR_DECODE_ALL 0x0e 134static int scb2_flash_probe(struct pci_dev *dev, 135 const struct pci_device_id *ent) 136{ 137 u8 reg; 138 139 /* enable decoding of the flash region in the south bridge */ 140 pci_read_config_byte(dev, CSB5_FCR, ®); 141 pci_write_config_byte(dev, CSB5_FCR, reg | CSB5_FCR_DECODE_ALL); 142 143 if (!request_mem_region(SCB2_ADDR, SCB2_WINDOW, scb2_map.name)) { 144 /* 145 * The BIOS seems to mark the flash region as 'reserved' 146 * in the e820 map. Warn and go about our business. 147 */ 148 printk(KERN_WARNING MODNAME 149 ": warning - can't reserve rom window, continuing\n"); 150 region_fail = 1; 151 } 152 153 /* remap the IO window (w/o caching) */ 154 scb2_ioaddr = ioremap_nocache(SCB2_ADDR, SCB2_WINDOW); 155 if (!scb2_ioaddr) { 156 printk(KERN_ERR MODNAME ": Failed to ioremap window!\n"); 157 if (!region_fail) 158 release_mem_region(SCB2_ADDR, SCB2_WINDOW); 159 return -ENOMEM; 160 } 161 162 scb2_map.phys = SCB2_ADDR; 163 scb2_map.virt = scb2_ioaddr; 164 scb2_map.size = SCB2_WINDOW; 165 166 simple_map_init(&scb2_map); 167 168 /* try to find a chip */ 169 scb2_mtd = do_map_probe("cfi_probe", &scb2_map); 170 171 if (!scb2_mtd) { 172 printk(KERN_ERR MODNAME ": flash probe failed!\n"); 173 iounmap(scb2_ioaddr); 174 if (!region_fail) 175 release_mem_region(SCB2_ADDR, SCB2_WINDOW); 176 return -ENODEV; 177 } 178 179 scb2_mtd->owner = THIS_MODULE; 180 if (scb2_fixup_mtd(scb2_mtd) < 0) { 181 mtd_device_unregister(scb2_mtd); 182 map_destroy(scb2_mtd); 183 iounmap(scb2_ioaddr); 184 if (!region_fail) 185 release_mem_region(SCB2_ADDR, SCB2_WINDOW); 186 return -ENODEV; 187 } 188 189 printk(KERN_NOTICE MODNAME ": chip size 0x%llx at offset 0x%llx\n", 190 (unsigned long long)scb2_mtd->size, 191 (unsigned long long)(SCB2_WINDOW - scb2_mtd->size)); 192 193 mtd_device_register(scb2_mtd, NULL, 0); 194 195 return 0; 196} 197 198static void scb2_flash_remove(struct pci_dev *dev) 199{ 200 if (!scb2_mtd) 201 return; 202 203 /* disable flash writes */ 204 mtd_lock(scb2_mtd, 0, scb2_mtd->size); 205 206 mtd_device_unregister(scb2_mtd); 207 map_destroy(scb2_mtd); 208 209 iounmap(scb2_ioaddr); 210 scb2_ioaddr = NULL; 211 212 if (!region_fail) 213 release_mem_region(SCB2_ADDR, SCB2_WINDOW); 214} 215 216static struct pci_device_id scb2_flash_pci_ids[] = { 217 { 218 .vendor = PCI_VENDOR_ID_SERVERWORKS, 219 .device = PCI_DEVICE_ID_SERVERWORKS_CSB5, 220 .subvendor = PCI_ANY_ID, 221 .subdevice = PCI_ANY_ID 222 }, 223 { 0, } 224}; 225 226static struct pci_driver scb2_flash_driver = { 227 .name = "Intel SCB2 BIOS Flash", 228 .id_table = scb2_flash_pci_ids, 229 .probe = scb2_flash_probe, 230 .remove = scb2_flash_remove, 231}; 232 233module_pci_driver(scb2_flash_driver); 234 235MODULE_LICENSE("GPL"); 236MODULE_AUTHOR("Tim Hockin <thockin@sun.com>"); 237MODULE_DESCRIPTION("MTD map driver for Intel SCB2 BIOS Flash"); 238MODULE_DEVICE_TABLE(pci, scb2_flash_pci_ids); 239