1/*
2 * GemTek radio card driver
3 *
4 * Copyright 1998 Jonas Munsin <jmunsin@iki.fi>
5 *
6 * GemTek hasn't released any specs on the card, so the protocol had to
7 * be reverse engineered with dosemu.
8 *
9 * Besides the protocol changes, this is mostly a copy of:
10 *
11 *    RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
12 *
13 *    Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
14 *    Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
15 *    Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
16 *
17 * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com>
18 * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
19 *
20 * Note: this card seems to swap the left and right audio channels!
21 *
22 * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
23 */
24
25#include <linux/module.h>	/* Modules 			*/
26#include <linux/init.h>		/* Initdata			*/
27#include <linux/ioport.h>	/* request_region		*/
28#include <linux/delay.h>	/* udelay			*/
29#include <linux/videodev2.h>	/* kernel radio structs		*/
30#include <linux/mutex.h>
31#include <linux/io.h>		/* outb, outb_p			*/
32#include <linux/pnp.h>
33#include <linux/slab.h>
34#include <media/v4l2-ioctl.h>
35#include <media/v4l2-device.h>
36#include "radio-isa.h"
37
38/*
39 * Module info.
40 */
41
42MODULE_AUTHOR("Jonas Munsin, Pekka Sepp��nen <pexu@kapsi.fi>");
43MODULE_DESCRIPTION("A driver for the GemTek Radio card.");
44MODULE_LICENSE("GPL");
45MODULE_VERSION("1.0.0");
46
47/*
48 * Module params.
49 */
50
51#ifndef CONFIG_RADIO_GEMTEK_PORT
52#define CONFIG_RADIO_GEMTEK_PORT -1
53#endif
54#ifndef CONFIG_RADIO_GEMTEK_PROBE
55#define CONFIG_RADIO_GEMTEK_PROBE 1
56#endif
57
58#define GEMTEK_MAX 4
59
60static bool probe = CONFIG_RADIO_GEMTEK_PROBE;
61static bool hardmute;
62static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT,
63			      [1 ... (GEMTEK_MAX - 1)] = -1 };
64static int radio_nr[GEMTEK_MAX]	= { [0 ... (GEMTEK_MAX - 1)] = -1 };
65
66module_param(probe, bool, 0444);
67MODULE_PARM_DESC(probe, "Enable automatic device probing.");
68
69module_param(hardmute, bool, 0644);
70MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may "
71	 "reduce static noise.");
72
73module_param_array(io, int, NULL, 0444);
74MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic "
75	 "probing is disabled or fails. The most common I/O ports are: 0x20c "
76	 "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to "
77	 "work for the combined sound/radiocard).");
78
79module_param_array(radio_nr, int, NULL, 0444);
80MODULE_PARM_DESC(radio_nr, "Radio device numbers");
81
82/*
83 * Frequency calculation constants.  Intermediate frequency 10.52 MHz (nominal
84 * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz).
85 */
86#define FSCALE		8
87#define IF_OFFSET	((unsigned int)(10.52 * 16000 * (1<<FSCALE)))
88#define REF_FREQ	((unsigned int)(6.39 * 16 * (1<<FSCALE)))
89
90#define GEMTEK_CK		0x01	/* Clock signal			*/
91#define GEMTEK_DA		0x02	/* Serial data			*/
92#define GEMTEK_CE		0x04	/* Chip enable			*/
93#define GEMTEK_NS		0x08	/* No signal			*/
94#define GEMTEK_MT		0x10	/* Line mute			*/
95#define GEMTEK_STDF_3_125_KHZ	0x01	/* Standard frequency 3.125 kHz	*/
96#define GEMTEK_PLL_OFF		0x07	/* PLL off			*/
97
98#define BU2614_BUS_SIZE	32	/* BU2614 / BU2614FS bus size		*/
99
100#define SHORT_DELAY 5		/* usec */
101#define LONG_DELAY 75		/* usec */
102
103struct gemtek {
104	struct radio_isa_card isa;
105	bool muted;
106	u32 bu2614data;
107};
108
109#define BU2614_FREQ_BITS 	16 /* D0..D15, Frequency data		*/
110#define BU2614_PORT_BITS	3 /* P0..P2, Output port control data	*/
111#define BU2614_VOID_BITS	4 /* unused 				*/
112#define BU2614_FMES_BITS	1 /* CT, Frequency measurement beginning data */
113#define BU2614_STDF_BITS	3 /* R0..R2, Standard frequency data	*/
114#define BU2614_SWIN_BITS	1 /* S, Switch between FMIN / AMIN	*/
115#define BU2614_SWAL_BITS        1 /* PS, Swallow counter division (AMIN only)*/
116#define BU2614_VOID2_BITS	1 /* unused				*/
117#define BU2614_FMUN_BITS	1 /* GT, Frequency measurement time & unlock */
118#define BU2614_TEST_BITS	1 /* TS, Test data is input		*/
119
120#define BU2614_FREQ_SHIFT 	0
121#define BU2614_PORT_SHIFT	(BU2614_FREQ_BITS + BU2614_FREQ_SHIFT)
122#define BU2614_VOID_SHIFT	(BU2614_PORT_BITS + BU2614_PORT_SHIFT)
123#define BU2614_FMES_SHIFT	(BU2614_VOID_BITS + BU2614_VOID_SHIFT)
124#define BU2614_STDF_SHIFT	(BU2614_FMES_BITS + BU2614_FMES_SHIFT)
125#define BU2614_SWIN_SHIFT	(BU2614_STDF_BITS + BU2614_STDF_SHIFT)
126#define BU2614_SWAL_SHIFT	(BU2614_SWIN_BITS + BU2614_SWIN_SHIFT)
127#define BU2614_VOID2_SHIFT	(BU2614_SWAL_BITS + BU2614_SWAL_SHIFT)
128#define BU2614_FMUN_SHIFT	(BU2614_VOID2_BITS + BU2614_VOID2_SHIFT)
129#define BU2614_TEST_SHIFT	(BU2614_FMUN_BITS + BU2614_FMUN_SHIFT)
130
131#define MKMASK(field)	(((1<<BU2614_##field##_BITS) - 1) << \
132			BU2614_##field##_SHIFT)
133#define BU2614_PORT_MASK	MKMASK(PORT)
134#define BU2614_FREQ_MASK	MKMASK(FREQ)
135#define BU2614_VOID_MASK	MKMASK(VOID)
136#define BU2614_FMES_MASK	MKMASK(FMES)
137#define BU2614_STDF_MASK	MKMASK(STDF)
138#define BU2614_SWIN_MASK	MKMASK(SWIN)
139#define BU2614_SWAL_MASK	MKMASK(SWAL)
140#define BU2614_VOID2_MASK	MKMASK(VOID2)
141#define BU2614_FMUN_MASK	MKMASK(FMUN)
142#define BU2614_TEST_MASK	MKMASK(TEST)
143
144/*
145 * Set data which will be sent to BU2614FS.
146 */
147#define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \
148	((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT))
149
150/*
151 * Transmit settings to BU2614FS over GemTek IC.
152 */
153static void gemtek_bu2614_transmit(struct gemtek *gt)
154{
155	struct radio_isa_card *isa = &gt->isa;
156	int i, bit, q, mute;
157
158	mute = gt->muted ? GEMTEK_MT : 0x00;
159
160	outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io);
161	udelay(LONG_DELAY);
162
163	for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) {
164		bit = (q & 1) ? GEMTEK_DA : 0;
165		outb_p(mute | GEMTEK_CE | bit, isa->io);
166		udelay(SHORT_DELAY);
167		outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io);
168		udelay(SHORT_DELAY);
169	}
170
171	outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io);
172	udelay(SHORT_DELAY);
173}
174
175/*
176 * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected).
177 */
178static unsigned long gemtek_convfreq(unsigned long freq)
179{
180	return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ;
181}
182
183static struct radio_isa_card *gemtek_alloc(void)
184{
185	struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL);
186
187	if (gt)
188		gt->muted = true;
189	return gt ? &gt->isa : NULL;
190}
191
192/*
193 * Set FM-frequency.
194 */
195static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq)
196{
197	struct gemtek *gt = container_of(isa, struct gemtek, isa);
198
199	if (hardmute && gt->muted)
200		return 0;
201
202	gemtek_bu2614_set(gt, BU2614_PORT, 0);
203	gemtek_bu2614_set(gt, BU2614_FMES, 0);
204	gemtek_bu2614_set(gt, BU2614_SWIN, 0);	/* FM-mode	*/
205	gemtek_bu2614_set(gt, BU2614_SWAL, 0);
206	gemtek_bu2614_set(gt, BU2614_FMUN, 1);	/* GT bit set	*/
207	gemtek_bu2614_set(gt, BU2614_TEST, 0);
208	gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ);
209	gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq));
210	gemtek_bu2614_transmit(gt);
211	return 0;
212}
213
214/*
215 * Set mute flag.
216 */
217static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
218{
219	struct gemtek *gt = container_of(isa, struct gemtek, isa);
220	int i;
221
222	gt->muted = mute;
223	if (hardmute) {
224		if (!mute)
225			return gemtek_s_frequency(isa, isa->freq);
226
227		/* Turn off PLL, disable data output */
228		gemtek_bu2614_set(gt, BU2614_PORT, 0);
229		gemtek_bu2614_set(gt, BU2614_FMES, 0);	/* CT bit off	*/
230		gemtek_bu2614_set(gt, BU2614_SWIN, 0);	/* FM-mode	*/
231		gemtek_bu2614_set(gt, BU2614_SWAL, 0);
232		gemtek_bu2614_set(gt, BU2614_FMUN, 0);	/* GT bit off	*/
233		gemtek_bu2614_set(gt, BU2614_TEST, 0);
234		gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF);
235		gemtek_bu2614_set(gt, BU2614_FREQ, 0);
236		gemtek_bu2614_transmit(gt);
237		return 0;
238	}
239
240	/* Read bus contents (CE, CK and DA). */
241	i = inb_p(isa->io);
242	/* Write it back with mute flag set. */
243	outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io);
244	udelay(SHORT_DELAY);
245	return 0;
246}
247
248static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa)
249{
250	if (inb_p(isa->io) & GEMTEK_NS)
251		return V4L2_TUNER_SUB_MONO;
252	return V4L2_TUNER_SUB_STEREO;
253}
254
255/*
256 * Check if requested card acts like GemTek Radio card.
257 */
258static bool gemtek_probe(struct radio_isa_card *isa, int io)
259{
260	int i, q;
261
262	q = inb_p(io);	/* Read bus contents before probing. */
263	/* Try to turn on CE, CK and DA respectively and check if card responds
264	   properly. */
265	for (i = 0; i < 3; ++i) {
266		outb_p(1 << i, io);
267		udelay(SHORT_DELAY);
268
269		if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5))))
270			return false;
271	}
272	outb_p(q >> 5, io);	/* Write bus contents back. */
273	udelay(SHORT_DELAY);
274	return true;
275}
276
277static const struct radio_isa_ops gemtek_ops = {
278	.alloc = gemtek_alloc,
279	.probe = gemtek_probe,
280	.s_mute_volume = gemtek_s_mute_volume,
281	.s_frequency = gemtek_s_frequency,
282	.g_rxsubchans = gemtek_g_rxsubchans,
283};
284
285static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c };
286
287#ifdef CONFIG_PNP
288static struct pnp_device_id gemtek_pnp_devices[] = {
289	/* AOpen FX-3D/Pro Radio */
290	{.id = "ADS7183", .driver_data = 0},
291	{.id = ""}
292};
293
294MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices);
295#endif
296
297static struct radio_isa_driver gemtek_driver = {
298	.driver = {
299		.match		= radio_isa_match,
300		.probe		= radio_isa_probe,
301		.remove		= radio_isa_remove,
302		.driver		= {
303			.name	= "radio-gemtek",
304		},
305	},
306#ifdef CONFIG_PNP
307	.pnp_driver = {
308		.name		= "radio-gemtek",
309		.id_table	= gemtek_pnp_devices,
310		.probe		= radio_isa_pnp_probe,
311		.remove		= radio_isa_pnp_remove,
312	},
313#endif
314	.io_params = io,
315	.radio_nr_params = radio_nr,
316	.io_ports = gemtek_ioports,
317	.num_of_io_ports = ARRAY_SIZE(gemtek_ioports),
318	.region_size = 1,
319	.card = "GemTek Radio",
320	.ops = &gemtek_ops,
321	.has_stereo = true,
322};
323
324static int __init gemtek_init(void)
325{
326	gemtek_driver.probe = probe;
327#ifdef CONFIG_PNP
328	pnp_register_driver(&gemtek_driver.pnp_driver);
329#endif
330	return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX);
331}
332
333static void __exit gemtek_exit(void)
334{
335	hardmute = true;	/* Turn off PLL */
336#ifdef CONFIG_PNP
337	pnp_unregister_driver(&gemtek_driver.pnp_driver);
338#endif
339	isa_unregister_driver(&gemtek_driver.driver);
340}
341
342module_init(gemtek_init);
343module_exit(gemtek_exit);
344