1/*
2 * radio-aztech.c - Aztech radio card driver
3 *
4 * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@xs4all.nl>
5 * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
6 * Adapted to support the Video for Linux API by
7 * Russell Kroll <rkroll@exploits.org>.  Based on original tuner code by:
8 *
9 * Quay Ly
10 * Donald Song
11 * Jason Lewis      (jlewis@twilight.vtc.vsc.edu)
12 * Scott McGrath    (smcgrath@twilight.vtc.vsc.edu)
13 * William McGrath  (wmcgrath@twilight.vtc.vsc.edu)
14 *
15 * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
16*/
17
18#include <linux/module.h>	/* Modules 			*/
19#include <linux/init.h>		/* Initdata			*/
20#include <linux/ioport.h>	/* request_region		*/
21#include <linux/delay.h>	/* udelay			*/
22#include <linux/videodev2.h>	/* kernel radio structs		*/
23#include <linux/io.h>		/* outb, outb_p			*/
24#include <linux/slab.h>
25#include <media/v4l2-device.h>
26#include <media/v4l2-ioctl.h>
27#include <media/v4l2-ctrls.h>
28#include "radio-isa.h"
29#include "lm7000.h"
30
31MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
32MODULE_DESCRIPTION("A driver for the Aztech radio card.");
33MODULE_LICENSE("GPL");
34MODULE_VERSION("1.0.0");
35
36/* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
37#ifndef CONFIG_RADIO_AZTECH_PORT
38#define CONFIG_RADIO_AZTECH_PORT -1
39#endif
40
41#define AZTECH_MAX 2
42
43static int io[AZTECH_MAX] = { [0] = CONFIG_RADIO_AZTECH_PORT,
44			      [1 ... (AZTECH_MAX - 1)] = -1 };
45static int radio_nr[AZTECH_MAX]	= { [0 ... (AZTECH_MAX - 1)] = -1 };
46static const int radio_wait_time = 1000;
47
48module_param_array(io, int, NULL, 0444);
49MODULE_PARM_DESC(io, "I/O addresses of the Aztech card (0x350 or 0x358)");
50module_param_array(radio_nr, int, NULL, 0444);
51MODULE_PARM_DESC(radio_nr, "Radio device numbers");
52
53struct aztech {
54	struct radio_isa_card isa;
55	int curvol;
56};
57
58/* bit definitions for register read */
59#define AZTECH_BIT_NOT_TUNED	(1 << 0)
60#define AZTECH_BIT_MONO		(1 << 1)
61/* bit definitions for register write */
62#define AZTECH_BIT_TUN_CE	(1 << 1)
63#define AZTECH_BIT_TUN_CLK	(1 << 6)
64#define AZTECH_BIT_TUN_DATA	(1 << 7)
65/* bits 0 and 2 are volume control, bits 3..5 are not connected */
66
67static void aztech_set_pins(void *handle, u8 pins)
68{
69	struct radio_isa_card *isa = handle;
70	struct aztech *az = container_of(isa, struct aztech, isa);
71	u8 bits = az->curvol;
72
73	if (pins & LM7000_DATA)
74		bits |= AZTECH_BIT_TUN_DATA;
75	if (pins & LM7000_CLK)
76		bits |= AZTECH_BIT_TUN_CLK;
77	if (pins & LM7000_CE)
78		bits |= AZTECH_BIT_TUN_CE;
79
80	outb_p(bits, az->isa.io);
81}
82
83static struct radio_isa_card *aztech_alloc(void)
84{
85	struct aztech *az = kzalloc(sizeof(*az), GFP_KERNEL);
86
87	return az ? &az->isa : NULL;
88}
89
90static int aztech_s_frequency(struct radio_isa_card *isa, u32 freq)
91{
92	lm7000_set_freq(freq, isa, aztech_set_pins);
93
94	return 0;
95}
96
97static u32 aztech_g_rxsubchans(struct radio_isa_card *isa)
98{
99	if (inb(isa->io) & AZTECH_BIT_MONO)
100		return V4L2_TUNER_SUB_MONO;
101	return V4L2_TUNER_SUB_STEREO;
102}
103
104static u32 aztech_g_signal(struct radio_isa_card *isa)
105{
106	return (inb(isa->io) & AZTECH_BIT_NOT_TUNED) ? 0 : 0xffff;
107}
108
109static int aztech_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
110{
111	struct aztech *az = container_of(isa, struct aztech, isa);
112
113	if (mute)
114		vol = 0;
115	az->curvol = (vol & 1) + ((vol & 2) << 1);
116	outb(az->curvol, isa->io);
117	return 0;
118}
119
120static const struct radio_isa_ops aztech_ops = {
121	.alloc = aztech_alloc,
122	.s_mute_volume = aztech_s_mute_volume,
123	.s_frequency = aztech_s_frequency,
124	.g_rxsubchans = aztech_g_rxsubchans,
125	.g_signal = aztech_g_signal,
126};
127
128static const int aztech_ioports[] = { 0x350, 0x358 };
129
130static struct radio_isa_driver aztech_driver = {
131	.driver = {
132		.match		= radio_isa_match,
133		.probe		= radio_isa_probe,
134		.remove		= radio_isa_remove,
135		.driver		= {
136			.name	= "radio-aztech",
137		},
138	},
139	.io_params = io,
140	.radio_nr_params = radio_nr,
141	.io_ports = aztech_ioports,
142	.num_of_io_ports = ARRAY_SIZE(aztech_ioports),
143	.region_size = 8,
144	.card = "Aztech Radio",
145	.ops = &aztech_ops,
146	.has_stereo = true,
147	.max_volume = 3,
148};
149
150static int __init aztech_init(void)
151{
152	return isa_register_driver(&aztech_driver.driver, AZTECH_MAX);
153}
154
155static void __exit aztech_exit(void)
156{
157	isa_unregister_driver(&aztech_driver.driver);
158}
159
160module_init(aztech_init);
161module_exit(aztech_exit);
162