1/*
2 */
3#include <linux/kernel.h>
4#include <linux/module.h>
5#include <linux/init.h>
6
7#include "cx88.h"
8
9static unsigned int vbi_debug;
10module_param(vbi_debug,int,0644);
11MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]");
12
13#define dprintk(level,fmt, arg...)	if (vbi_debug >= level) \
14	printk(KERN_DEBUG "%s: " fmt, dev->core->name , ## arg)
15
16/* ------------------------------------------------------------------ */
17
18int cx8800_vbi_fmt (struct file *file, void *priv,
19					struct v4l2_format *f)
20{
21	struct cx8800_dev *dev = video_drvdata(file);
22
23	f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH;
24	f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
25	f->fmt.vbi.offset = 244;
26
27	if (dev->core->tvnorm & V4L2_STD_525_60) {
28		/* ntsc */
29		f->fmt.vbi.sampling_rate = 28636363;
30		f->fmt.vbi.start[0] = 10;
31		f->fmt.vbi.start[1] = 273;
32		f->fmt.vbi.count[0] = VBI_LINE_NTSC_COUNT;
33		f->fmt.vbi.count[1] = VBI_LINE_NTSC_COUNT;
34
35	} else if (dev->core->tvnorm & V4L2_STD_625_50) {
36		/* pal */
37		f->fmt.vbi.sampling_rate = 35468950;
38		f->fmt.vbi.start[0] = V4L2_VBI_ITU_625_F1_START + 5;
39		f->fmt.vbi.start[1] = V4L2_VBI_ITU_625_F2_START + 5;
40		f->fmt.vbi.count[0] = VBI_LINE_PAL_COUNT;
41		f->fmt.vbi.count[1] = VBI_LINE_PAL_COUNT;
42	}
43	return 0;
44}
45
46static int cx8800_start_vbi_dma(struct cx8800_dev    *dev,
47			 struct cx88_dmaqueue *q,
48			 struct cx88_buffer   *buf)
49{
50	struct cx88_core *core = dev->core;
51
52	/* setup fifo + format */
53	cx88_sram_channel_setup(dev->core, &cx88_sram_channels[SRAM_CH24],
54				VBI_LINE_LENGTH, buf->risc.dma);
55
56	cx_write(MO_VBOS_CONTROL, ( (1 << 18) |  // comb filter delay fixup
57				    (1 << 15) |  // enable vbi capture
58				    (1 << 11) ));
59
60	/* reset counter */
61	cx_write(MO_VBI_GPCNTRL, GP_COUNT_CONTROL_RESET);
62	q->count = 0;
63
64	/* enable irqs */
65	cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT);
66	cx_set(MO_VID_INTMSK, 0x0f0088);
67
68	/* enable capture */
69	cx_set(VID_CAPTURE_CONTROL,0x18);
70
71	/* start dma */
72	cx_set(MO_DEV_CNTRL2, (1<<5));
73	cx_set(MO_VID_DMACNTRL, 0x88);
74
75	return 0;
76}
77
78void cx8800_stop_vbi_dma(struct cx8800_dev *dev)
79{
80	struct cx88_core *core = dev->core;
81
82	/* stop dma */
83	cx_clear(MO_VID_DMACNTRL, 0x88);
84
85	/* disable capture */
86	cx_clear(VID_CAPTURE_CONTROL,0x18);
87
88	/* disable irqs */
89	cx_clear(MO_PCI_INTMSK, PCI_INT_VIDINT);
90	cx_clear(MO_VID_INTMSK, 0x0f0088);
91}
92
93int cx8800_restart_vbi_queue(struct cx8800_dev    *dev,
94			     struct cx88_dmaqueue *q)
95{
96	struct cx88_buffer *buf;
97
98	if (list_empty(&q->active))
99		return 0;
100
101	buf = list_entry(q->active.next, struct cx88_buffer, list);
102	dprintk(2,"restart_queue [%p/%d]: restart dma\n",
103		buf, buf->vb.vb2_buf.index);
104	cx8800_start_vbi_dma(dev, q, buf);
105	return 0;
106}
107
108/* ------------------------------------------------------------------ */
109
110static int queue_setup(struct vb2_queue *q, const void *parg,
111			   unsigned int *num_buffers, unsigned int *num_planes,
112			   unsigned int sizes[], void *alloc_ctxs[])
113{
114	struct cx8800_dev *dev = q->drv_priv;
115
116	*num_planes = 1;
117	if (dev->core->tvnorm & V4L2_STD_525_60)
118		sizes[0] = VBI_LINE_NTSC_COUNT * VBI_LINE_LENGTH * 2;
119	else
120		sizes[0] = VBI_LINE_PAL_COUNT * VBI_LINE_LENGTH * 2;
121	alloc_ctxs[0] = dev->alloc_ctx;
122	return 0;
123}
124
125
126static int buffer_prepare(struct vb2_buffer *vb)
127{
128	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
129	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
130	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
131	struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0);
132	unsigned int lines;
133	unsigned int size;
134
135	if (dev->core->tvnorm & V4L2_STD_525_60)
136		lines = VBI_LINE_NTSC_COUNT;
137	else
138		lines = VBI_LINE_PAL_COUNT;
139	size = lines * VBI_LINE_LENGTH * 2;
140	if (vb2_plane_size(vb, 0) < size)
141		return -EINVAL;
142	vb2_set_plane_payload(vb, 0, size);
143
144	cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl,
145			 0, VBI_LINE_LENGTH * lines,
146			 VBI_LINE_LENGTH, 0,
147			 lines);
148	return 0;
149}
150
151static void buffer_finish(struct vb2_buffer *vb)
152{
153	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
154	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
155	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
156	struct cx88_riscmem *risc = &buf->risc;
157
158	if (risc->cpu)
159		pci_free_consistent(dev->pci, risc->size, risc->cpu, risc->dma);
160	memset(risc, 0, sizeof(*risc));
161}
162
163static void buffer_queue(struct vb2_buffer *vb)
164{
165	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
166	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
167	struct cx88_buffer    *buf = container_of(vbuf, struct cx88_buffer, vb);
168	struct cx88_buffer    *prev;
169	struct cx88_dmaqueue  *q    = &dev->vbiq;
170
171	/* add jump to start */
172	buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 8);
173	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC);
174	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 8);
175
176	if (list_empty(&q->active)) {
177		list_add_tail(&buf->list, &q->active);
178		cx8800_start_vbi_dma(dev, q, buf);
179		dprintk(2,"[%p/%d] vbi_queue - first active\n",
180			buf, buf->vb.vb2_buf.index);
181
182	} else {
183		buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1);
184		prev = list_entry(q->active.prev, struct cx88_buffer, list);
185		list_add_tail(&buf->list, &q->active);
186		prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
187		dprintk(2,"[%p/%d] buffer_queue - append to active\n",
188			buf, buf->vb.vb2_buf.index);
189	}
190}
191
192static int start_streaming(struct vb2_queue *q, unsigned int count)
193{
194	struct cx8800_dev *dev = q->drv_priv;
195	struct cx88_dmaqueue *dmaq = &dev->vbiq;
196	struct cx88_buffer *buf = list_entry(dmaq->active.next,
197			struct cx88_buffer, list);
198
199	cx8800_start_vbi_dma(dev, dmaq, buf);
200	return 0;
201}
202
203static void stop_streaming(struct vb2_queue *q)
204{
205	struct cx8800_dev *dev = q->drv_priv;
206	struct cx88_core *core = dev->core;
207	struct cx88_dmaqueue *dmaq = &dev->vbiq;
208	unsigned long flags;
209
210	cx_clear(MO_VID_DMACNTRL, 0x11);
211	cx_clear(VID_CAPTURE_CONTROL, 0x06);
212	cx8800_stop_vbi_dma(dev);
213	spin_lock_irqsave(&dev->slock, flags);
214	while (!list_empty(&dmaq->active)) {
215		struct cx88_buffer *buf = list_entry(dmaq->active.next,
216			struct cx88_buffer, list);
217
218		list_del(&buf->list);
219		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
220	}
221	spin_unlock_irqrestore(&dev->slock, flags);
222}
223
224const struct vb2_ops cx8800_vbi_qops = {
225	.queue_setup    = queue_setup,
226	.buf_prepare  = buffer_prepare,
227	.buf_finish = buffer_finish,
228	.buf_queue    = buffer_queue,
229	.wait_prepare = vb2_ops_wait_prepare,
230	.wait_finish = vb2_ops_wait_finish,
231	.start_streaming = start_streaming,
232	.stop_streaming = stop_streaming,
233};
234