1/*
2 * Samsung S5K6A3 image sensor driver
3 *
4 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
5 * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <linux/clk.h>
13#include <linux/delay.h>
14#include <linux/device.h>
15#include <linux/errno.h>
16#include <linux/gpio.h>
17#include <linux/i2c.h>
18#include <linux/kernel.h>
19#include <linux/module.h>
20#include <linux/of_gpio.h>
21#include <linux/pm_runtime.h>
22#include <linux/regulator/consumer.h>
23#include <linux/slab.h>
24#include <linux/videodev2.h>
25#include <media/v4l2-async.h>
26#include <media/v4l2-subdev.h>
27
28#define S5K6A3_SENSOR_MAX_WIDTH		1412
29#define S5K6A3_SENSOR_MAX_HEIGHT	1412
30#define S5K6A3_SENSOR_MIN_WIDTH		32
31#define S5K6A3_SENSOR_MIN_HEIGHT	32
32
33#define S5K6A3_DEFAULT_WIDTH		1296
34#define S5K6A3_DEFAULT_HEIGHT		732
35
36#define S5K6A3_DRV_NAME			"S5K6A3"
37#define S5K6A3_CLK_NAME			"extclk"
38#define S5K6A3_DEFAULT_CLK_FREQ		24000000U
39
40enum {
41	S5K6A3_SUPP_VDDA,
42	S5K6A3_SUPP_VDDIO,
43	S5K6A3_SUPP_AFVDD,
44	S5K6A3_NUM_SUPPLIES,
45};
46
47/**
48 * struct s5k6a3 - fimc-is sensor data structure
49 * @dev: pointer to this I2C client device structure
50 * @subdev: the image sensor's v4l2 subdev
51 * @pad: subdev media source pad
52 * @supplies: image sensor's voltage regulator supplies
53 * @gpio_reset: GPIO connected to the sensor's reset pin
54 * @lock: mutex protecting the structure's members below
55 * @format: media bus format at the sensor's source pad
56 */
57struct s5k6a3 {
58	struct device *dev;
59	struct v4l2_subdev subdev;
60	struct media_pad pad;
61	struct regulator_bulk_data supplies[S5K6A3_NUM_SUPPLIES];
62	int gpio_reset;
63	struct mutex lock;
64	struct v4l2_mbus_framefmt format;
65	struct clk *clock;
66	u32 clock_frequency;
67	int power_count;
68};
69
70static const char * const s5k6a3_supply_names[] = {
71	[S5K6A3_SUPP_VDDA]	= "svdda",
72	[S5K6A3_SUPP_VDDIO]	= "svddio",
73	[S5K6A3_SUPP_AFVDD]	= "afvdd",
74};
75
76static inline struct s5k6a3 *sd_to_s5k6a3(struct v4l2_subdev *sd)
77{
78	return container_of(sd, struct s5k6a3, subdev);
79}
80
81static const struct v4l2_mbus_framefmt s5k6a3_formats[] = {
82	{
83		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
84		.colorspace = V4L2_COLORSPACE_SRGB,
85		.field = V4L2_FIELD_NONE,
86	}
87};
88
89static const struct v4l2_mbus_framefmt *find_sensor_format(
90	struct v4l2_mbus_framefmt *mf)
91{
92	int i;
93
94	for (i = 0; i < ARRAY_SIZE(s5k6a3_formats); i++)
95		if (mf->code == s5k6a3_formats[i].code)
96			return &s5k6a3_formats[i];
97
98	return &s5k6a3_formats[0];
99}
100
101static int s5k6a3_enum_mbus_code(struct v4l2_subdev *sd,
102				  struct v4l2_subdev_pad_config *cfg,
103				  struct v4l2_subdev_mbus_code_enum *code)
104{
105	if (code->index >= ARRAY_SIZE(s5k6a3_formats))
106		return -EINVAL;
107
108	code->code = s5k6a3_formats[code->index].code;
109	return 0;
110}
111
112static void s5k6a3_try_format(struct v4l2_mbus_framefmt *mf)
113{
114	const struct v4l2_mbus_framefmt *fmt;
115
116	fmt = find_sensor_format(mf);
117	mf->code = fmt->code;
118	mf->field = V4L2_FIELD_NONE;
119	v4l_bound_align_image(&mf->width, S5K6A3_SENSOR_MIN_WIDTH,
120			      S5K6A3_SENSOR_MAX_WIDTH, 0,
121			      &mf->height, S5K6A3_SENSOR_MIN_HEIGHT,
122			      S5K6A3_SENSOR_MAX_HEIGHT, 0, 0);
123}
124
125static struct v4l2_mbus_framefmt *__s5k6a3_get_format(
126		struct s5k6a3 *sensor, struct v4l2_subdev_pad_config *cfg,
127		u32 pad, enum v4l2_subdev_format_whence which)
128{
129	if (which == V4L2_SUBDEV_FORMAT_TRY)
130		return cfg ? v4l2_subdev_get_try_format(&sensor->subdev, cfg, pad) : NULL;
131
132	return &sensor->format;
133}
134
135static int s5k6a3_set_fmt(struct v4l2_subdev *sd,
136				  struct v4l2_subdev_pad_config *cfg,
137				  struct v4l2_subdev_format *fmt)
138{
139	struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
140	struct v4l2_mbus_framefmt *mf;
141
142	s5k6a3_try_format(&fmt->format);
143
144	mf = __s5k6a3_get_format(sensor, cfg, fmt->pad, fmt->which);
145	if (mf) {
146		mutex_lock(&sensor->lock);
147		if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
148			*mf = fmt->format;
149		mutex_unlock(&sensor->lock);
150	}
151	return 0;
152}
153
154static int s5k6a3_get_fmt(struct v4l2_subdev *sd,
155			  struct v4l2_subdev_pad_config *cfg,
156			  struct v4l2_subdev_format *fmt)
157{
158	struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
159	struct v4l2_mbus_framefmt *mf;
160
161	mf = __s5k6a3_get_format(sensor, cfg, fmt->pad, fmt->which);
162
163	mutex_lock(&sensor->lock);
164	fmt->format = *mf;
165	mutex_unlock(&sensor->lock);
166	return 0;
167}
168
169static struct v4l2_subdev_pad_ops s5k6a3_pad_ops = {
170	.enum_mbus_code	= s5k6a3_enum_mbus_code,
171	.get_fmt	= s5k6a3_get_fmt,
172	.set_fmt	= s5k6a3_set_fmt,
173};
174
175static int s5k6a3_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
176{
177	struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(sd, fh->pad, 0);
178
179	*format		= s5k6a3_formats[0];
180	format->width	= S5K6A3_DEFAULT_WIDTH;
181	format->height	= S5K6A3_DEFAULT_HEIGHT;
182
183	return 0;
184}
185
186static const struct v4l2_subdev_internal_ops s5k6a3_sd_internal_ops = {
187	.open = s5k6a3_open,
188};
189
190static int __s5k6a3_power_on(struct s5k6a3 *sensor)
191{
192	int i = S5K6A3_SUPP_VDDA;
193	int ret;
194
195	ret = clk_set_rate(sensor->clock, sensor->clock_frequency);
196	if (ret < 0)
197		return ret;
198
199	ret = pm_runtime_get(sensor->dev);
200	if (ret < 0)
201		return ret;
202
203	ret = regulator_enable(sensor->supplies[i].consumer);
204	if (ret < 0)
205		goto error_rpm_put;
206
207	ret = clk_prepare_enable(sensor->clock);
208	if (ret < 0)
209		goto error_reg_dis;
210
211	for (i++; i < S5K6A3_NUM_SUPPLIES; i++) {
212		ret = regulator_enable(sensor->supplies[i].consumer);
213		if (ret < 0)
214			goto error_reg_dis;
215	}
216
217	gpio_set_value(sensor->gpio_reset, 1);
218	usleep_range(600, 800);
219	gpio_set_value(sensor->gpio_reset, 0);
220	usleep_range(600, 800);
221	gpio_set_value(sensor->gpio_reset, 1);
222
223	/* Delay needed for the sensor initialization */
224	msleep(20);
225	return 0;
226
227error_reg_dis:
228	for (--i; i >= 0; --i)
229		regulator_disable(sensor->supplies[i].consumer);
230error_rpm_put:
231	pm_runtime_put(sensor->dev);
232	return ret;
233}
234
235static int __s5k6a3_power_off(struct s5k6a3 *sensor)
236{
237	int i;
238
239	gpio_set_value(sensor->gpio_reset, 0);
240
241	for (i = S5K6A3_NUM_SUPPLIES - 1; i >= 0; i--)
242		regulator_disable(sensor->supplies[i].consumer);
243
244	clk_disable_unprepare(sensor->clock);
245	pm_runtime_put(sensor->dev);
246	return 0;
247}
248
249static int s5k6a3_s_power(struct v4l2_subdev *sd, int on)
250{
251	struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
252	int ret = 0;
253
254	mutex_lock(&sensor->lock);
255
256	if (sensor->power_count == !on) {
257		if (on)
258			ret = __s5k6a3_power_on(sensor);
259		else
260			ret = __s5k6a3_power_off(sensor);
261
262		if (ret == 0)
263			sensor->power_count += on ? 1 : -1;
264	}
265
266	mutex_unlock(&sensor->lock);
267	return ret;
268}
269
270static struct v4l2_subdev_core_ops s5k6a3_core_ops = {
271	.s_power = s5k6a3_s_power,
272};
273
274static struct v4l2_subdev_ops s5k6a3_subdev_ops = {
275	.core = &s5k6a3_core_ops,
276	.pad = &s5k6a3_pad_ops,
277};
278
279static int s5k6a3_probe(struct i2c_client *client,
280				const struct i2c_device_id *id)
281{
282	struct device *dev = &client->dev;
283	struct s5k6a3 *sensor;
284	struct v4l2_subdev *sd;
285	int gpio, i, ret;
286
287	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
288	if (!sensor)
289		return -ENOMEM;
290
291	mutex_init(&sensor->lock);
292	sensor->gpio_reset = -EINVAL;
293	sensor->clock = ERR_PTR(-EINVAL);
294	sensor->dev = dev;
295
296	sensor->clock = devm_clk_get(sensor->dev, S5K6A3_CLK_NAME);
297	if (IS_ERR(sensor->clock))
298		return PTR_ERR(sensor->clock);
299
300	gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
301	if (!gpio_is_valid(gpio))
302		return gpio;
303
304	ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW,
305						S5K6A3_DRV_NAME);
306	if (ret < 0)
307		return ret;
308
309	sensor->gpio_reset = gpio;
310
311	if (of_property_read_u32(dev->of_node, "clock-frequency",
312				 &sensor->clock_frequency)) {
313		sensor->clock_frequency = S5K6A3_DEFAULT_CLK_FREQ;
314		dev_info(dev, "using default %u Hz clock frequency\n",
315					sensor->clock_frequency);
316	}
317
318	for (i = 0; i < S5K6A3_NUM_SUPPLIES; i++)
319		sensor->supplies[i].supply = s5k6a3_supply_names[i];
320
321	ret = devm_regulator_bulk_get(&client->dev, S5K6A3_NUM_SUPPLIES,
322				      sensor->supplies);
323	if (ret < 0)
324		return ret;
325
326	sd = &sensor->subdev;
327	v4l2_i2c_subdev_init(sd, client, &s5k6a3_subdev_ops);
328	sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
329	sd->internal_ops = &s5k6a3_sd_internal_ops;
330
331	sensor->format.code = s5k6a3_formats[0].code;
332	sensor->format.width = S5K6A3_DEFAULT_WIDTH;
333	sensor->format.height = S5K6A3_DEFAULT_HEIGHT;
334
335	sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
336	ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0);
337	if (ret < 0)
338		return ret;
339
340	pm_runtime_no_callbacks(dev);
341	pm_runtime_enable(dev);
342
343	ret = v4l2_async_register_subdev(sd);
344
345	if (ret < 0) {
346		pm_runtime_disable(&client->dev);
347		media_entity_cleanup(&sd->entity);
348	}
349
350	return ret;
351}
352
353static int s5k6a3_remove(struct i2c_client *client)
354{
355	struct v4l2_subdev *sd = i2c_get_clientdata(client);
356
357	pm_runtime_disable(&client->dev);
358	v4l2_async_unregister_subdev(sd);
359	media_entity_cleanup(&sd->entity);
360	return 0;
361}
362
363static const struct i2c_device_id s5k6a3_ids[] = {
364	{ }
365};
366MODULE_DEVICE_TABLE(i2c, s5k6a3_ids);
367
368#ifdef CONFIG_OF
369static const struct of_device_id s5k6a3_of_match[] = {
370	{ .compatible = "samsung,s5k6a3" },
371	{ /* sentinel */ }
372};
373MODULE_DEVICE_TABLE(of, s5k6a3_of_match);
374#endif
375
376static struct i2c_driver s5k6a3_driver = {
377	.driver = {
378		.of_match_table	= of_match_ptr(s5k6a3_of_match),
379		.name		= S5K6A3_DRV_NAME,
380		.owner		= THIS_MODULE,
381	},
382	.probe		= s5k6a3_probe,
383	.remove		= s5k6a3_remove,
384	.id_table	= s5k6a3_ids,
385};
386
387module_i2c_driver(s5k6a3_driver);
388
389MODULE_DESCRIPTION("S5K6A3 image sensor subdev driver");
390MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
391MODULE_LICENSE("GPL v2");
392