1/* 2 * Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver 3 * 4 * Copyright (C) 2005 Steven Toth <stoth@linuxtv.org> 5 * 6 * Support for KWorld DVB-S 100 by Vadim Catana <skystar@moldova.cc> 7 * 8 * Support for CX24123/CX24113-NIM by Patrick Boettcher <pb@linuxtv.org> 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 18 * General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 23 */ 24 25#include <linux/slab.h> 26#include <linux/kernel.h> 27#include <linux/module.h> 28#include <linux/init.h> 29#include <asm/div64.h> 30 31#include "dvb_frontend.h" 32#include "cx24123.h" 33 34#define XTAL 10111000 35 36static int force_band; 37module_param(force_band, int, 0644); 38MODULE_PARM_DESC(force_band, "Force a specific band select "\ 39 "(1-9, default:off)."); 40 41static int debug; 42module_param(debug, int, 0644); 43MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); 44 45#define info(args...) do { printk(KERN_INFO "CX24123: " args); } while (0) 46#define err(args...) do { printk(KERN_ERR "CX24123: " args); } while (0) 47 48#define dprintk(args...) \ 49 do { \ 50 if (debug) { \ 51 printk(KERN_DEBUG "CX24123: %s: ", __func__); \ 52 printk(args); \ 53 } \ 54 } while (0) 55 56struct cx24123_state { 57 struct i2c_adapter *i2c; 58 const struct cx24123_config *config; 59 60 struct dvb_frontend frontend; 61 62 /* Some PLL specifics for tuning */ 63 u32 VCAarg; 64 u32 VGAarg; 65 u32 bandselectarg; 66 u32 pllarg; 67 u32 FILTune; 68 69 struct i2c_adapter tuner_i2c_adapter; 70 71 u8 demod_rev; 72 73 /* The Demod/Tuner can't easily provide these, we cache them */ 74 u32 currentfreq; 75 u32 currentsymbolrate; 76}; 77 78/* Various tuner defaults need to be established for a given symbol rate Sps */ 79static struct cx24123_AGC_val { 80 u32 symbolrate_low; 81 u32 symbolrate_high; 82 u32 VCAprogdata; 83 u32 VGAprogdata; 84 u32 FILTune; 85} cx24123_AGC_vals[] = 86{ 87 { 88 .symbolrate_low = 1000000, 89 .symbolrate_high = 4999999, 90 /* the specs recommend other values for VGA offsets, 91 but tests show they are wrong */ 92 .VGAprogdata = (1 << 19) | (0x180 << 9) | 0x1e0, 93 .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x07, 94 .FILTune = 0x27f /* 0.41 V */ 95 }, 96 { 97 .symbolrate_low = 5000000, 98 .symbolrate_high = 14999999, 99 .VGAprogdata = (1 << 19) | (0x180 << 9) | 0x1e0, 100 .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x1f, 101 .FILTune = 0x317 /* 0.90 V */ 102 }, 103 { 104 .symbolrate_low = 15000000, 105 .symbolrate_high = 45000000, 106 .VGAprogdata = (1 << 19) | (0x100 << 9) | 0x180, 107 .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x3f, 108 .FILTune = 0x145 /* 2.70 V */ 109 }, 110}; 111 112/* 113 * Various tuner defaults need to be established for a given frequency kHz. 114 * fixme: The bounds on the bands do not match the doc in real life. 115 * fixme: Some of them have been moved, other might need adjustment. 116 */ 117static struct cx24123_bandselect_val { 118 u32 freq_low; 119 u32 freq_high; 120 u32 VCOdivider; 121 u32 progdata; 122} cx24123_bandselect_vals[] = 123{ 124 /* band 1 */ 125 { 126 .freq_low = 950000, 127 .freq_high = 1074999, 128 .VCOdivider = 4, 129 .progdata = (0 << 19) | (0 << 9) | 0x40, 130 }, 131 132 /* band 2 */ 133 { 134 .freq_low = 1075000, 135 .freq_high = 1177999, 136 .VCOdivider = 4, 137 .progdata = (0 << 19) | (0 << 9) | 0x80, 138 }, 139 140 /* band 3 */ 141 { 142 .freq_low = 1178000, 143 .freq_high = 1295999, 144 .VCOdivider = 2, 145 .progdata = (0 << 19) | (1 << 9) | 0x01, 146 }, 147 148 /* band 4 */ 149 { 150 .freq_low = 1296000, 151 .freq_high = 1431999, 152 .VCOdivider = 2, 153 .progdata = (0 << 19) | (1 << 9) | 0x02, 154 }, 155 156 /* band 5 */ 157 { 158 .freq_low = 1432000, 159 .freq_high = 1575999, 160 .VCOdivider = 2, 161 .progdata = (0 << 19) | (1 << 9) | 0x04, 162 }, 163 164 /* band 6 */ 165 { 166 .freq_low = 1576000, 167 .freq_high = 1717999, 168 .VCOdivider = 2, 169 .progdata = (0 << 19) | (1 << 9) | 0x08, 170 }, 171 172 /* band 7 */ 173 { 174 .freq_low = 1718000, 175 .freq_high = 1855999, 176 .VCOdivider = 2, 177 .progdata = (0 << 19) | (1 << 9) | 0x10, 178 }, 179 180 /* band 8 */ 181 { 182 .freq_low = 1856000, 183 .freq_high = 2035999, 184 .VCOdivider = 2, 185 .progdata = (0 << 19) | (1 << 9) | 0x20, 186 }, 187 188 /* band 9 */ 189 { 190 .freq_low = 2036000, 191 .freq_high = 2150000, 192 .VCOdivider = 2, 193 .progdata = (0 << 19) | (1 << 9) | 0x40, 194 }, 195}; 196 197static struct { 198 u8 reg; 199 u8 data; 200} cx24123_regdata[] = 201{ 202 {0x00, 0x03}, /* Reset system */ 203 {0x00, 0x00}, /* Clear reset */ 204 {0x03, 0x07}, /* QPSK, DVB, Auto Acquisition (default) */ 205 {0x04, 0x10}, /* MPEG */ 206 {0x05, 0x04}, /* MPEG */ 207 {0x06, 0x31}, /* MPEG (default) */ 208 {0x0b, 0x00}, /* Freq search start point (default) */ 209 {0x0c, 0x00}, /* Demodulator sample gain (default) */ 210 {0x0d, 0x7f}, /* Force driver to shift until the maximum (+-10 MHz) */ 211 {0x0e, 0x03}, /* Default non-inverted, FEC 3/4 (default) */ 212 {0x0f, 0xfe}, /* FEC search mask (all supported codes) */ 213 {0x10, 0x01}, /* Default search inversion, no repeat (default) */ 214 {0x16, 0x00}, /* Enable reading of frequency */ 215 {0x17, 0x01}, /* Enable EsNO Ready Counter */ 216 {0x1c, 0x80}, /* Enable error counter */ 217 {0x20, 0x00}, /* Tuner burst clock rate = 500KHz */ 218 {0x21, 0x15}, /* Tuner burst mode, word length = 0x15 */ 219 {0x28, 0x00}, /* Enable FILTERV with positive pol., DiSEqC 2.x off */ 220 {0x29, 0x00}, /* DiSEqC LNB_DC off */ 221 {0x2a, 0xb0}, /* DiSEqC Parameters (default) */ 222 {0x2b, 0x73}, /* DiSEqC Tone Frequency (default) */ 223 {0x2c, 0x00}, /* DiSEqC Message (0x2c - 0x31) */ 224 {0x2d, 0x00}, 225 {0x2e, 0x00}, 226 {0x2f, 0x00}, 227 {0x30, 0x00}, 228 {0x31, 0x00}, 229 {0x32, 0x8c}, /* DiSEqC Parameters (default) */ 230 {0x33, 0x00}, /* Interrupts off (0x33 - 0x34) */ 231 {0x34, 0x00}, 232 {0x35, 0x03}, /* DiSEqC Tone Amplitude (default) */ 233 {0x36, 0x02}, /* DiSEqC Parameters (default) */ 234 {0x37, 0x3a}, /* DiSEqC Parameters (default) */ 235 {0x3a, 0x00}, /* Enable AGC accumulator (for signal strength) */ 236 {0x44, 0x00}, /* Constellation (default) */ 237 {0x45, 0x00}, /* Symbol count (default) */ 238 {0x46, 0x0d}, /* Symbol rate estimator on (default) */ 239 {0x56, 0xc1}, /* Error Counter = Viterbi BER */ 240 {0x57, 0xff}, /* Error Counter Window (default) */ 241 {0x5c, 0x20}, /* Acquisition AFC Expiration window (default is 0x10) */ 242 {0x67, 0x83}, /* Non-DCII symbol clock */ 243}; 244 245static int cx24123_i2c_writereg(struct cx24123_state *state, 246 u8 i2c_addr, int reg, int data) 247{ 248 u8 buf[] = { reg, data }; 249 struct i2c_msg msg = { 250 .addr = i2c_addr, .flags = 0, .buf = buf, .len = 2 251 }; 252 int err; 253 254 /* printk(KERN_DEBUG "wr(%02x): %02x %02x\n", i2c_addr, reg, data); */ 255 256 err = i2c_transfer(state->i2c, &msg, 1); 257 if (err != 1) { 258 printk("%s: writereg error(err == %i, reg == 0x%02x," 259 " data == 0x%02x)\n", __func__, err, reg, data); 260 return err; 261 } 262 263 return 0; 264} 265 266static int cx24123_i2c_readreg(struct cx24123_state *state, u8 i2c_addr, u8 reg) 267{ 268 int ret; 269 u8 b = 0; 270 struct i2c_msg msg[] = { 271 { .addr = i2c_addr, .flags = 0, .buf = ®, .len = 1 }, 272 { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &b, .len = 1 } 273 }; 274 275 ret = i2c_transfer(state->i2c, msg, 2); 276 277 if (ret != 2) { 278 err("%s: reg=0x%x (error=%d)\n", __func__, reg, ret); 279 return ret; 280 } 281 282 /* printk(KERN_DEBUG "rd(%02x): %02x %02x\n", i2c_addr, reg, b); */ 283 284 return b; 285} 286 287#define cx24123_readreg(state, reg) \ 288 cx24123_i2c_readreg(state, state->config->demod_address, reg) 289#define cx24123_writereg(state, reg, val) \ 290 cx24123_i2c_writereg(state, state->config->demod_address, reg, val) 291 292static int cx24123_set_inversion(struct cx24123_state *state, 293 enum fe_spectral_inversion inversion) 294{ 295 u8 nom_reg = cx24123_readreg(state, 0x0e); 296 u8 auto_reg = cx24123_readreg(state, 0x10); 297 298 switch (inversion) { 299 case INVERSION_OFF: 300 dprintk("inversion off\n"); 301 cx24123_writereg(state, 0x0e, nom_reg & ~0x80); 302 cx24123_writereg(state, 0x10, auto_reg | 0x80); 303 break; 304 case INVERSION_ON: 305 dprintk("inversion on\n"); 306 cx24123_writereg(state, 0x0e, nom_reg | 0x80); 307 cx24123_writereg(state, 0x10, auto_reg | 0x80); 308 break; 309 case INVERSION_AUTO: 310 dprintk("inversion auto\n"); 311 cx24123_writereg(state, 0x10, auto_reg & ~0x80); 312 break; 313 default: 314 return -EINVAL; 315 } 316 317 return 0; 318} 319 320static int cx24123_get_inversion(struct cx24123_state *state, 321 enum fe_spectral_inversion *inversion) 322{ 323 u8 val; 324 325 val = cx24123_readreg(state, 0x1b) >> 7; 326 327 if (val == 0) { 328 dprintk("read inversion off\n"); 329 *inversion = INVERSION_OFF; 330 } else { 331 dprintk("read inversion on\n"); 332 *inversion = INVERSION_ON; 333 } 334 335 return 0; 336} 337 338static int cx24123_set_fec(struct cx24123_state *state, enum fe_code_rate fec) 339{ 340 u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07; 341 342 if (((int)fec < FEC_NONE) || (fec > FEC_AUTO)) 343 fec = FEC_AUTO; 344 345 /* Set the soft decision threshold */ 346 if (fec == FEC_1_2) 347 cx24123_writereg(state, 0x43, 348 cx24123_readreg(state, 0x43) | 0x01); 349 else 350 cx24123_writereg(state, 0x43, 351 cx24123_readreg(state, 0x43) & ~0x01); 352 353 switch (fec) { 354 case FEC_1_2: 355 dprintk("set FEC to 1/2\n"); 356 cx24123_writereg(state, 0x0e, nom_reg | 0x01); 357 cx24123_writereg(state, 0x0f, 0x02); 358 break; 359 case FEC_2_3: 360 dprintk("set FEC to 2/3\n"); 361 cx24123_writereg(state, 0x0e, nom_reg | 0x02); 362 cx24123_writereg(state, 0x0f, 0x04); 363 break; 364 case FEC_3_4: 365 dprintk("set FEC to 3/4\n"); 366 cx24123_writereg(state, 0x0e, nom_reg | 0x03); 367 cx24123_writereg(state, 0x0f, 0x08); 368 break; 369 case FEC_4_5: 370 dprintk("set FEC to 4/5\n"); 371 cx24123_writereg(state, 0x0e, nom_reg | 0x04); 372 cx24123_writereg(state, 0x0f, 0x10); 373 break; 374 case FEC_5_6: 375 dprintk("set FEC to 5/6\n"); 376 cx24123_writereg(state, 0x0e, nom_reg | 0x05); 377 cx24123_writereg(state, 0x0f, 0x20); 378 break; 379 case FEC_6_7: 380 dprintk("set FEC to 6/7\n"); 381 cx24123_writereg(state, 0x0e, nom_reg | 0x06); 382 cx24123_writereg(state, 0x0f, 0x40); 383 break; 384 case FEC_7_8: 385 dprintk("set FEC to 7/8\n"); 386 cx24123_writereg(state, 0x0e, nom_reg | 0x07); 387 cx24123_writereg(state, 0x0f, 0x80); 388 break; 389 case FEC_AUTO: 390 dprintk("set FEC to auto\n"); 391 cx24123_writereg(state, 0x0f, 0xfe); 392 break; 393 default: 394 return -EOPNOTSUPP; 395 } 396 397 return 0; 398} 399 400static int cx24123_get_fec(struct cx24123_state *state, enum fe_code_rate *fec) 401{ 402 int ret; 403 404 ret = cx24123_readreg(state, 0x1b); 405 if (ret < 0) 406 return ret; 407 ret = ret & 0x07; 408 409 switch (ret) { 410 case 1: 411 *fec = FEC_1_2; 412 break; 413 case 2: 414 *fec = FEC_2_3; 415 break; 416 case 3: 417 *fec = FEC_3_4; 418 break; 419 case 4: 420 *fec = FEC_4_5; 421 break; 422 case 5: 423 *fec = FEC_5_6; 424 break; 425 case 6: 426 *fec = FEC_6_7; 427 break; 428 case 7: 429 *fec = FEC_7_8; 430 break; 431 default: 432 /* this can happen when there's no lock */ 433 *fec = FEC_NONE; 434 } 435 436 return 0; 437} 438 439/* Approximation of closest integer of log2(a/b). It actually gives the 440 lowest integer i such that 2^i >= round(a/b) */ 441static u32 cx24123_int_log2(u32 a, u32 b) 442{ 443 u32 exp, nearest = 0; 444 u32 div = a / b; 445 if (a % b >= b / 2) 446 ++div; 447 if (div < (1 << 31)) { 448 for (exp = 1; div > exp; nearest++) 449 exp += exp; 450 } 451 return nearest; 452} 453 454static int cx24123_set_symbolrate(struct cx24123_state *state, u32 srate) 455{ 456 u64 tmp; 457 u32 sample_rate, ratio, sample_gain; 458 u8 pll_mult; 459 460 /* check if symbol rate is within limits */ 461 if ((srate > state->frontend.ops.info.symbol_rate_max) || 462 (srate < state->frontend.ops.info.symbol_rate_min)) 463 return -EOPNOTSUPP; 464 465 /* choose the sampling rate high enough for the required operation, 466 while optimizing the power consumed by the demodulator */ 467 if (srate < (XTAL*2)/2) 468 pll_mult = 2; 469 else if (srate < (XTAL*3)/2) 470 pll_mult = 3; 471 else if (srate < (XTAL*4)/2) 472 pll_mult = 4; 473 else if (srate < (XTAL*5)/2) 474 pll_mult = 5; 475 else if (srate < (XTAL*6)/2) 476 pll_mult = 6; 477 else if (srate < (XTAL*7)/2) 478 pll_mult = 7; 479 else if (srate < (XTAL*8)/2) 480 pll_mult = 8; 481 else 482 pll_mult = 9; 483 484 485 sample_rate = pll_mult * XTAL; 486 487 /* SYSSymbolRate[21:0] = (srate << 23) / sample_rate */ 488 489 tmp = ((u64)srate) << 23; 490 do_div(tmp, sample_rate); 491 ratio = (u32) tmp; 492 493 cx24123_writereg(state, 0x01, pll_mult * 6); 494 495 cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f); 496 cx24123_writereg(state, 0x09, (ratio >> 8) & 0xff); 497 cx24123_writereg(state, 0x0a, ratio & 0xff); 498 499 /* also set the demodulator sample gain */ 500 sample_gain = cx24123_int_log2(sample_rate, srate); 501 tmp = cx24123_readreg(state, 0x0c) & ~0xe0; 502 cx24123_writereg(state, 0x0c, tmp | sample_gain << 5); 503 504 dprintk("srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n", 505 srate, ratio, sample_rate, sample_gain); 506 507 return 0; 508} 509 510/* 511 * Based on the required frequency and symbolrate, the tuner AGC has 512 * to be configured and the correct band selected. 513 * Calculate those values. 514 */ 515static int cx24123_pll_calculate(struct dvb_frontend *fe) 516{ 517 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 518 struct cx24123_state *state = fe->demodulator_priv; 519 u32 ndiv = 0, adiv = 0, vco_div = 0; 520 int i = 0; 521 int pump = 2; 522 int band = 0; 523 int num_bands = ARRAY_SIZE(cx24123_bandselect_vals); 524 struct cx24123_bandselect_val *bsv = NULL; 525 struct cx24123_AGC_val *agcv = NULL; 526 527 /* Defaults for low freq, low rate */ 528 state->VCAarg = cx24123_AGC_vals[0].VCAprogdata; 529 state->VGAarg = cx24123_AGC_vals[0].VGAprogdata; 530 state->bandselectarg = cx24123_bandselect_vals[0].progdata; 531 vco_div = cx24123_bandselect_vals[0].VCOdivider; 532 533 /* For the given symbol rate, determine the VCA, VGA and 534 * FILTUNE programming bits */ 535 for (i = 0; i < ARRAY_SIZE(cx24123_AGC_vals); i++) { 536 agcv = &cx24123_AGC_vals[i]; 537 if ((agcv->symbolrate_low <= p->symbol_rate) && 538 (agcv->symbolrate_high >= p->symbol_rate)) { 539 state->VCAarg = agcv->VCAprogdata; 540 state->VGAarg = agcv->VGAprogdata; 541 state->FILTune = agcv->FILTune; 542 } 543 } 544 545 /* determine the band to use */ 546 if (force_band < 1 || force_band > num_bands) { 547 for (i = 0; i < num_bands; i++) { 548 bsv = &cx24123_bandselect_vals[i]; 549 if ((bsv->freq_low <= p->frequency) && 550 (bsv->freq_high >= p->frequency)) 551 band = i; 552 } 553 } else 554 band = force_band - 1; 555 556 state->bandselectarg = cx24123_bandselect_vals[band].progdata; 557 vco_div = cx24123_bandselect_vals[band].VCOdivider; 558 559 /* determine the charge pump current */ 560 if (p->frequency < (cx24123_bandselect_vals[band].freq_low + 561 cx24123_bandselect_vals[band].freq_high) / 2) 562 pump = 0x01; 563 else 564 pump = 0x02; 565 566 /* Determine the N/A dividers for the requested lband freq (in kHz). */ 567 /* Note: the reference divider R=10, frequency is in KHz, 568 * XTAL is in Hz */ 569 ndiv = (((p->frequency * vco_div * 10) / 570 (2 * XTAL / 1000)) / 32) & 0x1ff; 571 adiv = (((p->frequency * vco_div * 10) / 572 (2 * XTAL / 1000)) % 32) & 0x1f; 573 574 if (adiv == 0 && ndiv > 0) 575 ndiv--; 576 577 /* control bits 11, refdiv 11, charge pump polarity 1, 578 * charge pump current, ndiv, adiv */ 579 state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | 580 (pump << 14) | (ndiv << 5) | adiv; 581 582 return 0; 583} 584 585/* 586 * Tuner data is 21 bits long, must be left-aligned in data. 587 * Tuner cx24109 is written through a dedicated 3wire interface 588 * on the demod chip. 589 */ 590static int cx24123_pll_writereg(struct dvb_frontend *fe, u32 data) 591{ 592 struct cx24123_state *state = fe->demodulator_priv; 593 unsigned long timeout; 594 595 dprintk("pll writereg called, data=0x%08x\n", data); 596 597 /* align the 21 bytes into to bit23 boundary */ 598 data = data << 3; 599 600 /* Reset the demod pll word length to 0x15 bits */ 601 cx24123_writereg(state, 0x21, 0x15); 602 603 /* write the msb 8 bits, wait for the send to be completed */ 604 timeout = jiffies + msecs_to_jiffies(40); 605 cx24123_writereg(state, 0x22, (data >> 16) & 0xff); 606 while ((cx24123_readreg(state, 0x20) & 0x40) == 0) { 607 if (time_after(jiffies, timeout)) { 608 err("%s: demodulator is not responding, "\ 609 "possibly hung, aborting.\n", __func__); 610 return -EREMOTEIO; 611 } 612 msleep(10); 613 } 614 615 /* send another 8 bytes, wait for the send to be completed */ 616 timeout = jiffies + msecs_to_jiffies(40); 617 cx24123_writereg(state, 0x22, (data >> 8) & 0xff); 618 while ((cx24123_readreg(state, 0x20) & 0x40) == 0) { 619 if (time_after(jiffies, timeout)) { 620 err("%s: demodulator is not responding, "\ 621 "possibly hung, aborting.\n", __func__); 622 return -EREMOTEIO; 623 } 624 msleep(10); 625 } 626 627 /* send the lower 5 bits of this byte, padded with 3 LBB, 628 * wait for the send to be completed */ 629 timeout = jiffies + msecs_to_jiffies(40); 630 cx24123_writereg(state, 0x22, (data) & 0xff); 631 while ((cx24123_readreg(state, 0x20) & 0x80)) { 632 if (time_after(jiffies, timeout)) { 633 err("%s: demodulator is not responding," \ 634 "possibly hung, aborting.\n", __func__); 635 return -EREMOTEIO; 636 } 637 msleep(10); 638 } 639 640 /* Trigger the demod to configure the tuner */ 641 cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) | 2); 642 cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) & 0xfd); 643 644 return 0; 645} 646 647static int cx24123_pll_tune(struct dvb_frontend *fe) 648{ 649 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 650 struct cx24123_state *state = fe->demodulator_priv; 651 u8 val; 652 653 dprintk("frequency=%i\n", p->frequency); 654 655 if (cx24123_pll_calculate(fe) != 0) { 656 err("%s: cx24123_pll_calcutate failed\n", __func__); 657 return -EINVAL; 658 } 659 660 /* Write the new VCO/VGA */ 661 cx24123_pll_writereg(fe, state->VCAarg); 662 cx24123_pll_writereg(fe, state->VGAarg); 663 664 /* Write the new bandselect and pll args */ 665 cx24123_pll_writereg(fe, state->bandselectarg); 666 cx24123_pll_writereg(fe, state->pllarg); 667 668 /* set the FILTUNE voltage */ 669 val = cx24123_readreg(state, 0x28) & ~0x3; 670 cx24123_writereg(state, 0x27, state->FILTune >> 2); 671 cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3)); 672 673 dprintk("pll tune VCA=%d, band=%d, pll=%d\n", state->VCAarg, 674 state->bandselectarg, state->pllarg); 675 676 return 0; 677} 678 679 680/* 681 * 0x23: 682 * [7:7] = BTI enabled 683 * [6:6] = I2C repeater enabled 684 * [5:5] = I2C repeater start 685 * [0:0] = BTI start 686 */ 687 688/* mode == 1 -> i2c-repeater, 0 -> bti */ 689static int cx24123_repeater_mode(struct cx24123_state *state, u8 mode, u8 start) 690{ 691 u8 r = cx24123_readreg(state, 0x23) & 0x1e; 692 if (mode) 693 r |= (1 << 6) | (start << 5); 694 else 695 r |= (1 << 7) | (start); 696 return cx24123_writereg(state, 0x23, r); 697} 698 699static int cx24123_initfe(struct dvb_frontend *fe) 700{ 701 struct cx24123_state *state = fe->demodulator_priv; 702 int i; 703 704 dprintk("init frontend\n"); 705 706 /* Configure the demod to a good set of defaults */ 707 for (i = 0; i < ARRAY_SIZE(cx24123_regdata); i++) 708 cx24123_writereg(state, cx24123_regdata[i].reg, 709 cx24123_regdata[i].data); 710 711 /* Set the LNB polarity */ 712 if (state->config->lnb_polarity) 713 cx24123_writereg(state, 0x32, 714 cx24123_readreg(state, 0x32) | 0x02); 715 716 if (state->config->dont_use_pll) 717 cx24123_repeater_mode(state, 1, 0); 718 719 return 0; 720} 721 722static int cx24123_set_voltage(struct dvb_frontend *fe, 723 enum fe_sec_voltage voltage) 724{ 725 struct cx24123_state *state = fe->demodulator_priv; 726 u8 val; 727 728 val = cx24123_readreg(state, 0x29) & ~0x40; 729 730 switch (voltage) { 731 case SEC_VOLTAGE_13: 732 dprintk("setting voltage 13V\n"); 733 return cx24123_writereg(state, 0x29, val & 0x7f); 734 case SEC_VOLTAGE_18: 735 dprintk("setting voltage 18V\n"); 736 return cx24123_writereg(state, 0x29, val | 0x80); 737 case SEC_VOLTAGE_OFF: 738 /* already handled in cx88-dvb */ 739 return 0; 740 default: 741 return -EINVAL; 742 } 743 744 return 0; 745} 746 747/* wait for diseqc queue to become ready (or timeout) */ 748static void cx24123_wait_for_diseqc(struct cx24123_state *state) 749{ 750 unsigned long timeout = jiffies + msecs_to_jiffies(200); 751 while (!(cx24123_readreg(state, 0x29) & 0x40)) { 752 if (time_after(jiffies, timeout)) { 753 err("%s: diseqc queue not ready, " \ 754 "command may be lost.\n", __func__); 755 break; 756 } 757 msleep(10); 758 } 759} 760 761static int cx24123_send_diseqc_msg(struct dvb_frontend *fe, 762 struct dvb_diseqc_master_cmd *cmd) 763{ 764 struct cx24123_state *state = fe->demodulator_priv; 765 int i, val, tone; 766 767 dprintk("\n"); 768 769 /* stop continuous tone if enabled */ 770 tone = cx24123_readreg(state, 0x29); 771 if (tone & 0x10) 772 cx24123_writereg(state, 0x29, tone & ~0x50); 773 774 /* wait for diseqc queue ready */ 775 cx24123_wait_for_diseqc(state); 776 777 /* select tone mode */ 778 cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xfb); 779 780 for (i = 0; i < cmd->msg_len; i++) 781 cx24123_writereg(state, 0x2C + i, cmd->msg[i]); 782 783 val = cx24123_readreg(state, 0x29); 784 cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | 785 ((cmd->msg_len-3) & 3)); 786 787 /* wait for diseqc message to finish sending */ 788 cx24123_wait_for_diseqc(state); 789 790 /* restart continuous tone if enabled */ 791 if (tone & 0x10) 792 cx24123_writereg(state, 0x29, tone & ~0x40); 793 794 return 0; 795} 796 797static int cx24123_diseqc_send_burst(struct dvb_frontend *fe, 798 enum fe_sec_mini_cmd burst) 799{ 800 struct cx24123_state *state = fe->demodulator_priv; 801 int val, tone; 802 803 dprintk("\n"); 804 805 /* stop continuous tone if enabled */ 806 tone = cx24123_readreg(state, 0x29); 807 if (tone & 0x10) 808 cx24123_writereg(state, 0x29, tone & ~0x50); 809 810 /* wait for diseqc queue ready */ 811 cx24123_wait_for_diseqc(state); 812 813 /* select tone mode */ 814 cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) | 0x4); 815 msleep(30); 816 val = cx24123_readreg(state, 0x29); 817 if (burst == SEC_MINI_A) 818 cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x00)); 819 else if (burst == SEC_MINI_B) 820 cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x08)); 821 else 822 return -EINVAL; 823 824 cx24123_wait_for_diseqc(state); 825 cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xfb); 826 827 /* restart continuous tone if enabled */ 828 if (tone & 0x10) 829 cx24123_writereg(state, 0x29, tone & ~0x40); 830 831 return 0; 832} 833 834static int cx24123_read_status(struct dvb_frontend *fe, enum fe_status *status) 835{ 836 struct cx24123_state *state = fe->demodulator_priv; 837 int sync = cx24123_readreg(state, 0x14); 838 839 *status = 0; 840 if (state->config->dont_use_pll) { 841 u32 tun_status = 0; 842 if (fe->ops.tuner_ops.get_status) 843 fe->ops.tuner_ops.get_status(fe, &tun_status); 844 if (tun_status & TUNER_STATUS_LOCKED) 845 *status |= FE_HAS_SIGNAL; 846 } else { 847 int lock = cx24123_readreg(state, 0x20); 848 if (lock & 0x01) 849 *status |= FE_HAS_SIGNAL; 850 } 851 852 if (sync & 0x02) 853 *status |= FE_HAS_CARRIER; /* Phase locked */ 854 if (sync & 0x04) 855 *status |= FE_HAS_VITERBI; 856 857 /* Reed-Solomon Status */ 858 if (sync & 0x08) 859 *status |= FE_HAS_SYNC; 860 if (sync & 0x80) 861 *status |= FE_HAS_LOCK; /*Full Sync */ 862 863 return 0; 864} 865 866/* 867 * Configured to return the measurement of errors in blocks, 868 * because no UCBLOCKS value is available, so this value doubles up 869 * to satisfy both measurements. 870 */ 871static int cx24123_read_ber(struct dvb_frontend *fe, u32 *ber) 872{ 873 struct cx24123_state *state = fe->demodulator_priv; 874 875 /* The true bit error rate is this value divided by 876 the window size (set as 256 * 255) */ 877 *ber = ((cx24123_readreg(state, 0x1c) & 0x3f) << 16) | 878 (cx24123_readreg(state, 0x1d) << 8 | 879 cx24123_readreg(state, 0x1e)); 880 881 dprintk("BER = %d\n", *ber); 882 883 return 0; 884} 885 886static int cx24123_read_signal_strength(struct dvb_frontend *fe, 887 u16 *signal_strength) 888{ 889 struct cx24123_state *state = fe->demodulator_priv; 890 891 /* larger = better */ 892 *signal_strength = cx24123_readreg(state, 0x3b) << 8; 893 894 dprintk("Signal strength = %d\n", *signal_strength); 895 896 return 0; 897} 898 899static int cx24123_read_snr(struct dvb_frontend *fe, u16 *snr) 900{ 901 struct cx24123_state *state = fe->demodulator_priv; 902 903 /* Inverted raw Es/N0 count, totally bogus but better than the 904 BER threshold. */ 905 *snr = 65535 - (((u16)cx24123_readreg(state, 0x18) << 8) | 906 (u16)cx24123_readreg(state, 0x19)); 907 908 dprintk("read S/N index = %d\n", *snr); 909 910 return 0; 911} 912 913static int cx24123_set_frontend(struct dvb_frontend *fe) 914{ 915 struct cx24123_state *state = fe->demodulator_priv; 916 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 917 918 dprintk("\n"); 919 920 if (state->config->set_ts_params) 921 state->config->set_ts_params(fe, 0); 922 923 state->currentfreq = p->frequency; 924 state->currentsymbolrate = p->symbol_rate; 925 926 cx24123_set_inversion(state, p->inversion); 927 cx24123_set_fec(state, p->fec_inner); 928 cx24123_set_symbolrate(state, p->symbol_rate); 929 930 if (!state->config->dont_use_pll) 931 cx24123_pll_tune(fe); 932 else if (fe->ops.tuner_ops.set_params) 933 fe->ops.tuner_ops.set_params(fe); 934 else 935 err("it seems I don't have a tuner..."); 936 937 /* Enable automatic acquisition and reset cycle */ 938 cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07)); 939 cx24123_writereg(state, 0x00, 0x10); 940 cx24123_writereg(state, 0x00, 0); 941 942 if (state->config->agc_callback) 943 state->config->agc_callback(fe); 944 945 return 0; 946} 947 948static int cx24123_get_frontend(struct dvb_frontend *fe) 949{ 950 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 951 struct cx24123_state *state = fe->demodulator_priv; 952 953 dprintk("\n"); 954 955 if (cx24123_get_inversion(state, &p->inversion) != 0) { 956 err("%s: Failed to get inversion status\n", __func__); 957 return -EREMOTEIO; 958 } 959 if (cx24123_get_fec(state, &p->fec_inner) != 0) { 960 err("%s: Failed to get fec status\n", __func__); 961 return -EREMOTEIO; 962 } 963 p->frequency = state->currentfreq; 964 p->symbol_rate = state->currentsymbolrate; 965 966 return 0; 967} 968 969static int cx24123_set_tone(struct dvb_frontend *fe, enum fe_sec_tone_mode tone) 970{ 971 struct cx24123_state *state = fe->demodulator_priv; 972 u8 val; 973 974 /* wait for diseqc queue ready */ 975 cx24123_wait_for_diseqc(state); 976 977 val = cx24123_readreg(state, 0x29) & ~0x40; 978 979 switch (tone) { 980 case SEC_TONE_ON: 981 dprintk("setting tone on\n"); 982 return cx24123_writereg(state, 0x29, val | 0x10); 983 case SEC_TONE_OFF: 984 dprintk("setting tone off\n"); 985 return cx24123_writereg(state, 0x29, val & 0xef); 986 default: 987 err("CASE reached default with tone=%d\n", tone); 988 return -EINVAL; 989 } 990 991 return 0; 992} 993 994static int cx24123_tune(struct dvb_frontend *fe, 995 bool re_tune, 996 unsigned int mode_flags, 997 unsigned int *delay, 998 enum fe_status *status) 999{ 1000 int retval = 0; 1001 1002 if (re_tune) 1003 retval = cx24123_set_frontend(fe); 1004 1005 if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) 1006 cx24123_read_status(fe, status); 1007 *delay = HZ/10; 1008 1009 return retval; 1010} 1011 1012static int cx24123_get_algo(struct dvb_frontend *fe) 1013{ 1014 return DVBFE_ALGO_HW; 1015} 1016 1017static void cx24123_release(struct dvb_frontend *fe) 1018{ 1019 struct cx24123_state *state = fe->demodulator_priv; 1020 dprintk("\n"); 1021 i2c_del_adapter(&state->tuner_i2c_adapter); 1022 kfree(state); 1023} 1024 1025static int cx24123_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap, 1026 struct i2c_msg msg[], int num) 1027{ 1028 struct cx24123_state *state = i2c_get_adapdata(i2c_adap); 1029 /* this repeater closes after the first stop */ 1030 cx24123_repeater_mode(state, 1, 1); 1031 return i2c_transfer(state->i2c, msg, num); 1032} 1033 1034static u32 cx24123_tuner_i2c_func(struct i2c_adapter *adapter) 1035{ 1036 return I2C_FUNC_I2C; 1037} 1038 1039static struct i2c_algorithm cx24123_tuner_i2c_algo = { 1040 .master_xfer = cx24123_tuner_i2c_tuner_xfer, 1041 .functionality = cx24123_tuner_i2c_func, 1042}; 1043 1044struct i2c_adapter * 1045 cx24123_get_tuner_i2c_adapter(struct dvb_frontend *fe) 1046{ 1047 struct cx24123_state *state = fe->demodulator_priv; 1048 return &state->tuner_i2c_adapter; 1049} 1050EXPORT_SYMBOL(cx24123_get_tuner_i2c_adapter); 1051 1052static struct dvb_frontend_ops cx24123_ops; 1053 1054struct dvb_frontend *cx24123_attach(const struct cx24123_config *config, 1055 struct i2c_adapter *i2c) 1056{ 1057 /* allocate memory for the internal state */ 1058 struct cx24123_state *state = 1059 kzalloc(sizeof(struct cx24123_state), GFP_KERNEL); 1060 1061 dprintk("\n"); 1062 if (state == NULL) { 1063 err("Unable to kzalloc\n"); 1064 goto error; 1065 } 1066 1067 /* setup the state */ 1068 state->config = config; 1069 state->i2c = i2c; 1070 1071 /* check if the demod is there */ 1072 state->demod_rev = cx24123_readreg(state, 0x00); 1073 switch (state->demod_rev) { 1074 case 0xe1: 1075 info("detected CX24123C\n"); 1076 break; 1077 case 0xd1: 1078 info("detected CX24123\n"); 1079 break; 1080 default: 1081 err("wrong demod revision: %x\n", state->demod_rev); 1082 goto error; 1083 } 1084 1085 /* create dvb_frontend */ 1086 memcpy(&state->frontend.ops, &cx24123_ops, 1087 sizeof(struct dvb_frontend_ops)); 1088 state->frontend.demodulator_priv = state; 1089 1090 /* create tuner i2c adapter */ 1091 if (config->dont_use_pll) 1092 cx24123_repeater_mode(state, 1, 0); 1093 1094 strlcpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus", 1095 sizeof(state->tuner_i2c_adapter.name)); 1096 state->tuner_i2c_adapter.algo = &cx24123_tuner_i2c_algo; 1097 state->tuner_i2c_adapter.algo_data = NULL; 1098 state->tuner_i2c_adapter.dev.parent = i2c->dev.parent; 1099 i2c_set_adapdata(&state->tuner_i2c_adapter, state); 1100 if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) { 1101 err("tuner i2c bus could not be initialized\n"); 1102 goto error; 1103 } 1104 1105 return &state->frontend; 1106 1107error: 1108 kfree(state); 1109 1110 return NULL; 1111} 1112EXPORT_SYMBOL(cx24123_attach); 1113 1114static struct dvb_frontend_ops cx24123_ops = { 1115 .delsys = { SYS_DVBS }, 1116 .info = { 1117 .name = "Conexant CX24123/CX24109", 1118 .frequency_min = 950000, 1119 .frequency_max = 2150000, 1120 .frequency_stepsize = 1011, /* kHz for QPSK frontends */ 1121 .frequency_tolerance = 5000, 1122 .symbol_rate_min = 1000000, 1123 .symbol_rate_max = 45000000, 1124 .caps = FE_CAN_INVERSION_AUTO | 1125 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | 1126 FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | 1127 FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | 1128 FE_CAN_QPSK | FE_CAN_RECOVER 1129 }, 1130 1131 .release = cx24123_release, 1132 1133 .init = cx24123_initfe, 1134 .set_frontend = cx24123_set_frontend, 1135 .get_frontend = cx24123_get_frontend, 1136 .read_status = cx24123_read_status, 1137 .read_ber = cx24123_read_ber, 1138 .read_signal_strength = cx24123_read_signal_strength, 1139 .read_snr = cx24123_read_snr, 1140 .diseqc_send_master_cmd = cx24123_send_diseqc_msg, 1141 .diseqc_send_burst = cx24123_diseqc_send_burst, 1142 .set_tone = cx24123_set_tone, 1143 .set_voltage = cx24123_set_voltage, 1144 .tune = cx24123_tune, 1145 .get_frontend_algo = cx24123_get_algo, 1146}; 1147 1148MODULE_DESCRIPTION("DVB Frontend module for Conexant " \ 1149 "CX24123/CX24109/CX24113 hardware"); 1150MODULE_AUTHOR("Steven Toth"); 1151MODULE_LICENSE("GPL"); 1152 1153