1/* 2 * Driver for AUO in-cell touchscreens 3 * 4 * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> 5 * 6 * loosely based on auo_touch.c from Dell Streak vendor-kernel 7 * 8 * Copyright (c) 2008 QUALCOMM Incorporated. 9 * Copyright (c) 2008 QUALCOMM USA, INC. 10 * 11 * 12 * This software is licensed under the terms of the GNU General Public 13 * License version 2, as published by the Free Software Foundation, and 14 * may be copied, distributed, and modified under those terms. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 */ 22 23#include <linux/kernel.h> 24#include <linux/module.h> 25#include <linux/interrupt.h> 26#include <linux/slab.h> 27#include <linux/input.h> 28#include <linux/jiffies.h> 29#include <linux/i2c.h> 30#include <linux/mutex.h> 31#include <linux/delay.h> 32#include <linux/gpio.h> 33#include <linux/input/auo-pixcir-ts.h> 34#include <linux/of.h> 35#include <linux/of_gpio.h> 36 37/* 38 * Coordinate calculation: 39 * X1 = X1_LSB + X1_MSB*256 40 * Y1 = Y1_LSB + Y1_MSB*256 41 * X2 = X2_LSB + X2_MSB*256 42 * Y2 = Y2_LSB + Y2_MSB*256 43 */ 44#define AUO_PIXCIR_REG_X1_LSB 0x00 45#define AUO_PIXCIR_REG_X1_MSB 0x01 46#define AUO_PIXCIR_REG_Y1_LSB 0x02 47#define AUO_PIXCIR_REG_Y1_MSB 0x03 48#define AUO_PIXCIR_REG_X2_LSB 0x04 49#define AUO_PIXCIR_REG_X2_MSB 0x05 50#define AUO_PIXCIR_REG_Y2_LSB 0x06 51#define AUO_PIXCIR_REG_Y2_MSB 0x07 52 53#define AUO_PIXCIR_REG_STRENGTH 0x0d 54#define AUO_PIXCIR_REG_STRENGTH_X1_LSB 0x0e 55#define AUO_PIXCIR_REG_STRENGTH_X1_MSB 0x0f 56 57#define AUO_PIXCIR_REG_RAW_DATA_X 0x2b 58#define AUO_PIXCIR_REG_RAW_DATA_Y 0x4f 59 60#define AUO_PIXCIR_REG_X_SENSITIVITY 0x6f 61#define AUO_PIXCIR_REG_Y_SENSITIVITY 0x70 62#define AUO_PIXCIR_REG_INT_SETTING 0x71 63#define AUO_PIXCIR_REG_INT_WIDTH 0x72 64#define AUO_PIXCIR_REG_POWER_MODE 0x73 65 66#define AUO_PIXCIR_REG_VERSION 0x77 67#define AUO_PIXCIR_REG_CALIBRATE 0x78 68 69#define AUO_PIXCIR_REG_TOUCHAREA_X1 0x1e 70#define AUO_PIXCIR_REG_TOUCHAREA_Y1 0x1f 71#define AUO_PIXCIR_REG_TOUCHAREA_X2 0x20 72#define AUO_PIXCIR_REG_TOUCHAREA_Y2 0x21 73 74#define AUO_PIXCIR_REG_EEPROM_CALIB_X 0x42 75#define AUO_PIXCIR_REG_EEPROM_CALIB_Y 0xad 76 77#define AUO_PIXCIR_INT_TPNUM_MASK 0xe0 78#define AUO_PIXCIR_INT_TPNUM_SHIFT 5 79#define AUO_PIXCIR_INT_RELEASE (1 << 4) 80#define AUO_PIXCIR_INT_ENABLE (1 << 3) 81#define AUO_PIXCIR_INT_POL_HIGH (1 << 2) 82#define AUO_PIXCIR_INT_MODE_MASK 0x03 83 84/* 85 * Power modes: 86 * active: scan speed 60Hz 87 * sleep: scan speed 10Hz can be auto-activated, wakeup on 1st touch 88 * deep sleep: scan speed 1Hz can only be entered or left manually. 89 */ 90#define AUO_PIXCIR_POWER_ACTIVE 0x00 91#define AUO_PIXCIR_POWER_SLEEP 0x01 92#define AUO_PIXCIR_POWER_DEEP_SLEEP 0x02 93#define AUO_PIXCIR_POWER_MASK 0x03 94 95#define AUO_PIXCIR_POWER_ALLOW_SLEEP (1 << 2) 96#define AUO_PIXCIR_POWER_IDLE_TIME(ms) ((ms & 0xf) << 4) 97 98#define AUO_PIXCIR_CALIBRATE 0x03 99 100#define AUO_PIXCIR_EEPROM_CALIB_X_LEN 62 101#define AUO_PIXCIR_EEPROM_CALIB_Y_LEN 36 102 103#define AUO_PIXCIR_RAW_DATA_X_LEN 18 104#define AUO_PIXCIR_RAW_DATA_Y_LEN 11 105 106#define AUO_PIXCIR_STRENGTH_ENABLE (1 << 0) 107 108/* Touchscreen absolute values */ 109#define AUO_PIXCIR_REPORT_POINTS 2 110#define AUO_PIXCIR_MAX_AREA 0xff 111#define AUO_PIXCIR_PENUP_TIMEOUT_MS 10 112 113struct auo_pixcir_ts { 114 struct i2c_client *client; 115 struct input_dev *input; 116 const struct auo_pixcir_ts_platdata *pdata; 117 char phys[32]; 118 119 /* special handling for touch_indicate interupt mode */ 120 bool touch_ind_mode; 121 122 wait_queue_head_t wait; 123 bool stopped; 124}; 125 126struct auo_point_t { 127 int coord_x; 128 int coord_y; 129 int area_major; 130 int area_minor; 131 int orientation; 132}; 133 134static int auo_pixcir_collect_data(struct auo_pixcir_ts *ts, 135 struct auo_point_t *point) 136{ 137 struct i2c_client *client = ts->client; 138 const struct auo_pixcir_ts_platdata *pdata = ts->pdata; 139 uint8_t raw_coord[8]; 140 uint8_t raw_area[4]; 141 int i, ret; 142 143 /* touch coordinates */ 144 ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_X1_LSB, 145 8, raw_coord); 146 if (ret < 0) { 147 dev_err(&client->dev, "failed to read coordinate, %d\n", ret); 148 return ret; 149 } 150 151 /* touch area */ 152 ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_TOUCHAREA_X1, 153 4, raw_area); 154 if (ret < 0) { 155 dev_err(&client->dev, "could not read touch area, %d\n", ret); 156 return ret; 157 } 158 159 for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) { 160 point[i].coord_x = 161 raw_coord[4 * i + 1] << 8 | raw_coord[4 * i]; 162 point[i].coord_y = 163 raw_coord[4 * i + 3] << 8 | raw_coord[4 * i + 2]; 164 165 if (point[i].coord_x > pdata->x_max || 166 point[i].coord_y > pdata->y_max) { 167 dev_warn(&client->dev, "coordinates (%d,%d) invalid\n", 168 point[i].coord_x, point[i].coord_y); 169 point[i].coord_x = point[i].coord_y = 0; 170 } 171 172 /* determine touch major, minor and orientation */ 173 point[i].area_major = max(raw_area[2 * i], raw_area[2 * i + 1]); 174 point[i].area_minor = min(raw_area[2 * i], raw_area[2 * i + 1]); 175 point[i].orientation = raw_area[2 * i] > raw_area[2 * i + 1]; 176 } 177 178 return 0; 179} 180 181static irqreturn_t auo_pixcir_interrupt(int irq, void *dev_id) 182{ 183 struct auo_pixcir_ts *ts = dev_id; 184 const struct auo_pixcir_ts_platdata *pdata = ts->pdata; 185 struct auo_point_t point[AUO_PIXCIR_REPORT_POINTS]; 186 int i; 187 int ret; 188 int fingers = 0; 189 int abs = -1; 190 191 while (!ts->stopped) { 192 193 /* check for up event in touch touch_ind_mode */ 194 if (ts->touch_ind_mode) { 195 if (gpio_get_value(pdata->gpio_int) == 0) { 196 input_mt_sync(ts->input); 197 input_report_key(ts->input, BTN_TOUCH, 0); 198 input_sync(ts->input); 199 break; 200 } 201 } 202 203 ret = auo_pixcir_collect_data(ts, point); 204 if (ret < 0) { 205 /* we want to loop only in touch_ind_mode */ 206 if (!ts->touch_ind_mode) 207 break; 208 209 wait_event_timeout(ts->wait, ts->stopped, 210 msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS)); 211 continue; 212 } 213 214 for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) { 215 if (point[i].coord_x > 0 || point[i].coord_y > 0) { 216 input_report_abs(ts->input, ABS_MT_POSITION_X, 217 point[i].coord_x); 218 input_report_abs(ts->input, ABS_MT_POSITION_Y, 219 point[i].coord_y); 220 input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, 221 point[i].area_major); 222 input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, 223 point[i].area_minor); 224 input_report_abs(ts->input, ABS_MT_ORIENTATION, 225 point[i].orientation); 226 input_mt_sync(ts->input); 227 228 /* use first finger as source for singletouch */ 229 if (fingers == 0) 230 abs = i; 231 232 /* number of touch points could also be queried 233 * via i2c but would require an additional call 234 */ 235 fingers++; 236 } 237 } 238 239 input_report_key(ts->input, BTN_TOUCH, fingers > 0); 240 241 if (abs > -1) { 242 input_report_abs(ts->input, ABS_X, point[abs].coord_x); 243 input_report_abs(ts->input, ABS_Y, point[abs].coord_y); 244 } 245 246 input_sync(ts->input); 247 248 /* we want to loop only in touch_ind_mode */ 249 if (!ts->touch_ind_mode) 250 break; 251 252 wait_event_timeout(ts->wait, ts->stopped, 253 msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS)); 254 } 255 256 return IRQ_HANDLED; 257} 258 259/* 260 * Set the power mode of the device. 261 * Valid modes are 262 * - AUO_PIXCIR_POWER_ACTIVE 263 * - AUO_PIXCIR_POWER_SLEEP - automatically left on first touch 264 * - AUO_PIXCIR_POWER_DEEP_SLEEP 265 */ 266static int auo_pixcir_power_mode(struct auo_pixcir_ts *ts, int mode) 267{ 268 struct i2c_client *client = ts->client; 269 int ret; 270 271 ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_POWER_MODE); 272 if (ret < 0) { 273 dev_err(&client->dev, "unable to read reg %Xh, %d\n", 274 AUO_PIXCIR_REG_POWER_MODE, ret); 275 return ret; 276 } 277 278 ret &= ~AUO_PIXCIR_POWER_MASK; 279 ret |= mode; 280 281 ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_POWER_MODE, ret); 282 if (ret) { 283 dev_err(&client->dev, "unable to write reg %Xh, %d\n", 284 AUO_PIXCIR_REG_POWER_MODE, ret); 285 return ret; 286 } 287 288 return 0; 289} 290 291static int auo_pixcir_int_config(struct auo_pixcir_ts *ts, 292 int int_setting) 293{ 294 struct i2c_client *client = ts->client; 295 const struct auo_pixcir_ts_platdata *pdata = ts->pdata; 296 int ret; 297 298 ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING); 299 if (ret < 0) { 300 dev_err(&client->dev, "unable to read reg %Xh, %d\n", 301 AUO_PIXCIR_REG_INT_SETTING, ret); 302 return ret; 303 } 304 305 ret &= ~AUO_PIXCIR_INT_MODE_MASK; 306 ret |= int_setting; 307 ret |= AUO_PIXCIR_INT_POL_HIGH; /* always use high for interrupts */ 308 309 ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING, 310 ret); 311 if (ret < 0) { 312 dev_err(&client->dev, "unable to write reg %Xh, %d\n", 313 AUO_PIXCIR_REG_INT_SETTING, ret); 314 return ret; 315 } 316 317 ts->touch_ind_mode = pdata->int_setting == AUO_PIXCIR_INT_TOUCH_IND; 318 319 return 0; 320} 321 322/* control the generation of interrupts on the device side */ 323static int auo_pixcir_int_toggle(struct auo_pixcir_ts *ts, bool enable) 324{ 325 struct i2c_client *client = ts->client; 326 int ret; 327 328 ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING); 329 if (ret < 0) { 330 dev_err(&client->dev, "unable to read reg %Xh, %d\n", 331 AUO_PIXCIR_REG_INT_SETTING, ret); 332 return ret; 333 } 334 335 if (enable) 336 ret |= AUO_PIXCIR_INT_ENABLE; 337 else 338 ret &= ~AUO_PIXCIR_INT_ENABLE; 339 340 ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING, 341 ret); 342 if (ret < 0) { 343 dev_err(&client->dev, "unable to write reg %Xh, %d\n", 344 AUO_PIXCIR_REG_INT_SETTING, ret); 345 return ret; 346 } 347 348 return 0; 349} 350 351static int auo_pixcir_start(struct auo_pixcir_ts *ts) 352{ 353 struct i2c_client *client = ts->client; 354 int ret; 355 356 ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_ACTIVE); 357 if (ret < 0) { 358 dev_err(&client->dev, "could not set power mode, %d\n", 359 ret); 360 return ret; 361 } 362 363 ts->stopped = false; 364 mb(); 365 enable_irq(client->irq); 366 367 ret = auo_pixcir_int_toggle(ts, 1); 368 if (ret < 0) { 369 dev_err(&client->dev, "could not enable interrupt, %d\n", 370 ret); 371 disable_irq(client->irq); 372 return ret; 373 } 374 375 return 0; 376} 377 378static int auo_pixcir_stop(struct auo_pixcir_ts *ts) 379{ 380 struct i2c_client *client = ts->client; 381 int ret; 382 383 ret = auo_pixcir_int_toggle(ts, 0); 384 if (ret < 0) { 385 dev_err(&client->dev, "could not disable interrupt, %d\n", 386 ret); 387 return ret; 388 } 389 390 /* disable receiving of interrupts */ 391 disable_irq(client->irq); 392 ts->stopped = true; 393 mb(); 394 wake_up(&ts->wait); 395 396 return auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_DEEP_SLEEP); 397} 398 399static int auo_pixcir_input_open(struct input_dev *dev) 400{ 401 struct auo_pixcir_ts *ts = input_get_drvdata(dev); 402 403 return auo_pixcir_start(ts); 404} 405 406static void auo_pixcir_input_close(struct input_dev *dev) 407{ 408 struct auo_pixcir_ts *ts = input_get_drvdata(dev); 409 410 auo_pixcir_stop(ts); 411 412 return; 413} 414 415static int __maybe_unused auo_pixcir_suspend(struct device *dev) 416{ 417 struct i2c_client *client = to_i2c_client(dev); 418 struct auo_pixcir_ts *ts = i2c_get_clientdata(client); 419 struct input_dev *input = ts->input; 420 int ret = 0; 421 422 mutex_lock(&input->mutex); 423 424 /* when configured as wakeup source, device should always wake system 425 * therefore start device if necessary 426 */ 427 if (device_may_wakeup(&client->dev)) { 428 /* need to start device if not open, to be wakeup source */ 429 if (!input->users) { 430 ret = auo_pixcir_start(ts); 431 if (ret) 432 goto unlock; 433 } 434 435 enable_irq_wake(client->irq); 436 ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_SLEEP); 437 } else if (input->users) { 438 ret = auo_pixcir_stop(ts); 439 } 440 441unlock: 442 mutex_unlock(&input->mutex); 443 444 return ret; 445} 446 447static int __maybe_unused auo_pixcir_resume(struct device *dev) 448{ 449 struct i2c_client *client = to_i2c_client(dev); 450 struct auo_pixcir_ts *ts = i2c_get_clientdata(client); 451 struct input_dev *input = ts->input; 452 int ret = 0; 453 454 mutex_lock(&input->mutex); 455 456 if (device_may_wakeup(&client->dev)) { 457 disable_irq_wake(client->irq); 458 459 /* need to stop device if it was not open on suspend */ 460 if (!input->users) { 461 ret = auo_pixcir_stop(ts); 462 if (ret) 463 goto unlock; 464 } 465 466 /* device wakes automatically from SLEEP */ 467 } else if (input->users) { 468 ret = auo_pixcir_start(ts); 469 } 470 471unlock: 472 mutex_unlock(&input->mutex); 473 474 return ret; 475} 476 477static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops, 478 auo_pixcir_suspend, auo_pixcir_resume); 479 480#ifdef CONFIG_OF 481static struct auo_pixcir_ts_platdata *auo_pixcir_parse_dt(struct device *dev) 482{ 483 struct auo_pixcir_ts_platdata *pdata; 484 struct device_node *np = dev->of_node; 485 486 if (!np) 487 return ERR_PTR(-ENOENT); 488 489 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); 490 if (!pdata) { 491 dev_err(dev, "failed to allocate platform data\n"); 492 return ERR_PTR(-ENOMEM); 493 } 494 495 pdata->gpio_int = of_get_gpio(np, 0); 496 if (!gpio_is_valid(pdata->gpio_int)) { 497 dev_err(dev, "failed to get interrupt gpio\n"); 498 return ERR_PTR(-EINVAL); 499 } 500 501 pdata->gpio_rst = of_get_gpio(np, 1); 502 if (!gpio_is_valid(pdata->gpio_rst)) { 503 dev_err(dev, "failed to get reset gpio\n"); 504 return ERR_PTR(-EINVAL); 505 } 506 507 if (of_property_read_u32(np, "x-size", &pdata->x_max)) { 508 dev_err(dev, "failed to get x-size property\n"); 509 return ERR_PTR(-EINVAL); 510 } 511 512 if (of_property_read_u32(np, "y-size", &pdata->y_max)) { 513 dev_err(dev, "failed to get y-size property\n"); 514 return ERR_PTR(-EINVAL); 515 } 516 517 /* default to asserting the interrupt when the screen is touched */ 518 pdata->int_setting = AUO_PIXCIR_INT_TOUCH_IND; 519 520 return pdata; 521} 522#else 523static struct auo_pixcir_ts_platdata *auo_pixcir_parse_dt(struct device *dev) 524{ 525 return ERR_PTR(-EINVAL); 526} 527#endif 528 529static void auo_pixcir_reset(void *data) 530{ 531 struct auo_pixcir_ts *ts = data; 532 533 gpio_set_value(ts->pdata->gpio_rst, 0); 534} 535 536static int auo_pixcir_probe(struct i2c_client *client, 537 const struct i2c_device_id *id) 538{ 539 const struct auo_pixcir_ts_platdata *pdata; 540 struct auo_pixcir_ts *ts; 541 struct input_dev *input_dev; 542 int version; 543 int error; 544 545 pdata = dev_get_platdata(&client->dev); 546 if (!pdata) { 547 pdata = auo_pixcir_parse_dt(&client->dev); 548 if (IS_ERR(pdata)) 549 return PTR_ERR(pdata); 550 } 551 552 ts = devm_kzalloc(&client->dev, 553 sizeof(struct auo_pixcir_ts), GFP_KERNEL); 554 if (!ts) 555 return -ENOMEM; 556 557 input_dev = devm_input_allocate_device(&client->dev); 558 if (!input_dev) { 559 dev_err(&client->dev, "could not allocate input device\n"); 560 return -ENOMEM; 561 } 562 563 ts->pdata = pdata; 564 ts->client = client; 565 ts->input = input_dev; 566 ts->touch_ind_mode = 0; 567 ts->stopped = true; 568 init_waitqueue_head(&ts->wait); 569 570 snprintf(ts->phys, sizeof(ts->phys), 571 "%s/input0", dev_name(&client->dev)); 572 573 input_dev->name = "AUO-Pixcir touchscreen"; 574 input_dev->phys = ts->phys; 575 input_dev->id.bustype = BUS_I2C; 576 577 input_dev->open = auo_pixcir_input_open; 578 input_dev->close = auo_pixcir_input_close; 579 580 __set_bit(EV_ABS, input_dev->evbit); 581 __set_bit(EV_KEY, input_dev->evbit); 582 583 __set_bit(BTN_TOUCH, input_dev->keybit); 584 585 /* For single touch */ 586 input_set_abs_params(input_dev, ABS_X, 0, pdata->x_max, 0, 0); 587 input_set_abs_params(input_dev, ABS_Y, 0, pdata->y_max, 0, 0); 588 589 /* For multi touch */ 590 input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 591 pdata->x_max, 0, 0); 592 input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 593 pdata->y_max, 0, 0); 594 input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 595 AUO_PIXCIR_MAX_AREA, 0, 0); 596 input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, 597 AUO_PIXCIR_MAX_AREA, 0, 0); 598 input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); 599 600 input_set_drvdata(ts->input, ts); 601 602 error = devm_gpio_request_one(&client->dev, pdata->gpio_int, 603 GPIOF_DIR_IN, "auo_pixcir_ts_int"); 604 if (error) { 605 dev_err(&client->dev, "request of gpio %d failed, %d\n", 606 pdata->gpio_int, error); 607 return error; 608 } 609 610 error = devm_gpio_request_one(&client->dev, pdata->gpio_rst, 611 GPIOF_DIR_OUT | GPIOF_INIT_HIGH, 612 "auo_pixcir_ts_rst"); 613 if (error) { 614 dev_err(&client->dev, "request of gpio %d failed, %d\n", 615 pdata->gpio_rst, error); 616 return error; 617 } 618 619 error = devm_add_action(&client->dev, auo_pixcir_reset, ts); 620 if (error) { 621 auo_pixcir_reset(ts); 622 dev_err(&client->dev, "failed to register reset action, %d\n", 623 error); 624 return error; 625 } 626 627 msleep(200); 628 629 version = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_VERSION); 630 if (version < 0) { 631 error = version; 632 return error; 633 } 634 635 dev_info(&client->dev, "firmware version 0x%X\n", version); 636 637 error = auo_pixcir_int_config(ts, pdata->int_setting); 638 if (error) 639 return error; 640 641 error = devm_request_threaded_irq(&client->dev, client->irq, 642 NULL, auo_pixcir_interrupt, 643 IRQF_TRIGGER_RISING | IRQF_ONESHOT, 644 input_dev->name, ts); 645 if (error) { 646 dev_err(&client->dev, "irq %d requested failed, %d\n", 647 client->irq, error); 648 return error; 649 } 650 651 /* stop device and put it into deep sleep until it is opened */ 652 error = auo_pixcir_stop(ts); 653 if (error) 654 return error; 655 656 error = input_register_device(input_dev); 657 if (error) { 658 dev_err(&client->dev, "could not register input device, %d\n", 659 error); 660 return error; 661 } 662 663 i2c_set_clientdata(client, ts); 664 665 return 0; 666} 667 668static const struct i2c_device_id auo_pixcir_idtable[] = { 669 { "auo_pixcir_ts", 0 }, 670 { } 671}; 672MODULE_DEVICE_TABLE(i2c, auo_pixcir_idtable); 673 674#ifdef CONFIG_OF 675static const struct of_device_id auo_pixcir_ts_dt_idtable[] = { 676 { .compatible = "auo,auo_pixcir_ts" }, 677 {}, 678}; 679MODULE_DEVICE_TABLE(of, auo_pixcir_ts_dt_idtable); 680#endif 681 682static struct i2c_driver auo_pixcir_driver = { 683 .driver = { 684 .name = "auo_pixcir_ts", 685 .pm = &auo_pixcir_pm_ops, 686 .of_match_table = of_match_ptr(auo_pixcir_ts_dt_idtable), 687 }, 688 .probe = auo_pixcir_probe, 689 .id_table = auo_pixcir_idtable, 690}; 691 692module_i2c_driver(auo_pixcir_driver); 693 694MODULE_DESCRIPTION("AUO-PIXCIR touchscreen driver"); 695MODULE_LICENSE("GPL v2"); 696MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); 697