1/*
2 * Generic linux-input device driver for keyboard devices
3 *
4 * Copyright (c) 2001 Brian S. Julin
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 *    notice, this list of conditions, and the following disclaimer,
12 *    without modification.
13 * 2. The name of the author may not be used to endorse or promote products
14 *    derived from this software without specific prior written permission.
15 *
16 * Alternatively, this software may be distributed under the terms of the
17 * GNU General Public License ("GPL").
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 *
29 * References:
30 * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
31 *
32 */
33
34#include <linux/hil.h>
35#include <linux/input.h>
36#include <linux/serio.h>
37#include <linux/kernel.h>
38#include <linux/module.h>
39#include <linux/completion.h>
40#include <linux/slab.h>
41#include <linux/pci_ids.h>
42
43#define PREFIX "HIL: "
44
45MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
46MODULE_DESCRIPTION("HIL keyboard/mouse driver");
47MODULE_LICENSE("Dual BSD/GPL");
48MODULE_ALIAS("serio:ty03pr25id00ex*"); /* HIL keyboard */
49MODULE_ALIAS("serio:ty03pr25id0Fex*"); /* HIL mouse */
50
51#define HIL_PACKET_MAX_LENGTH 16
52
53#define HIL_KBD_SET1_UPBIT 0x01
54#define HIL_KBD_SET1_SHIFT 1
55static unsigned int hil_kbd_set1[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly =
56	{ HIL_KEYCODES_SET1 };
57
58#define HIL_KBD_SET2_UPBIT 0x01
59#define HIL_KBD_SET2_SHIFT 1
60/* Set2 is user defined */
61
62#define HIL_KBD_SET3_UPBIT 0x80
63#define HIL_KBD_SET3_SHIFT 0
64static unsigned int hil_kbd_set3[HIL_KEYCODES_SET3_TBLSIZE] __read_mostly =
65	{ HIL_KEYCODES_SET3 };
66
67static const char hil_language[][16] = { HIL_LOCALE_MAP };
68
69struct hil_dev {
70	struct input_dev *dev;
71	struct serio *serio;
72
73	/* Input buffer and index for packets from HIL bus. */
74	hil_packet data[HIL_PACKET_MAX_LENGTH];
75	int idx4; /* four counts per packet */
76
77	/* Raw device info records from HIL bus, see hil.h for fields. */
78	char	idd[HIL_PACKET_MAX_LENGTH];	/* DID byte and IDD record */
79	char	rsc[HIL_PACKET_MAX_LENGTH];	/* RSC record */
80	char	exd[HIL_PACKET_MAX_LENGTH];	/* EXD record */
81	char	rnm[HIL_PACKET_MAX_LENGTH + 1];	/* RNM record + NULL term. */
82
83	struct completion cmd_done;
84
85	bool is_pointer;
86	/* Extra device details needed for pointing devices. */
87	unsigned int nbtn, naxes;
88	unsigned int btnmap[7];
89};
90
91static bool hil_dev_is_command_response(hil_packet p)
92{
93	if ((p & ~HIL_CMDCT_POL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL))
94		return false;
95
96	if ((p & ~HIL_CMDCT_RPL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL))
97		return false;
98
99	return true;
100}
101
102static void hil_dev_handle_command_response(struct hil_dev *dev)
103{
104	hil_packet p;
105	char *buf;
106	int i, idx;
107
108	idx = dev->idx4 / 4;
109	p = dev->data[idx - 1];
110
111	switch (p & HIL_PKT_DATA_MASK) {
112	case HIL_CMD_IDD:
113		buf = dev->idd;
114		break;
115
116	case HIL_CMD_RSC:
117		buf = dev->rsc;
118		break;
119
120	case HIL_CMD_EXD:
121		buf = dev->exd;
122		break;
123
124	case HIL_CMD_RNM:
125		dev->rnm[HIL_PACKET_MAX_LENGTH] = 0;
126		buf = dev->rnm;
127		break;
128
129	default:
130		/* These occur when device isn't present */
131		if (p != (HIL_ERR_INT | HIL_PKT_CMD)) {
132			/* Anything else we'd like to know about. */
133			printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p);
134		}
135		goto out;
136	}
137
138	for (i = 0; i < idx; i++)
139		buf[i] = dev->data[i] & HIL_PKT_DATA_MASK;
140	for (; i < HIL_PACKET_MAX_LENGTH; i++)
141		buf[i] = 0;
142 out:
143	complete(&dev->cmd_done);
144}
145
146static void hil_dev_handle_kbd_events(struct hil_dev *kbd)
147{
148	struct input_dev *dev = kbd->dev;
149	int idx = kbd->idx4 / 4;
150	int i;
151
152	switch (kbd->data[0] & HIL_POL_CHARTYPE_MASK) {
153	case HIL_POL_CHARTYPE_NONE:
154		return;
155
156	case HIL_POL_CHARTYPE_ASCII:
157		for (i = 1; i < idx - 1; i++)
158			input_report_key(dev, kbd->data[i] & 0x7f, 1);
159		break;
160
161	case HIL_POL_CHARTYPE_RSVD1:
162	case HIL_POL_CHARTYPE_RSVD2:
163	case HIL_POL_CHARTYPE_BINARY:
164		for (i = 1; i < idx - 1; i++)
165			input_report_key(dev, kbd->data[i], 1);
166		break;
167
168	case HIL_POL_CHARTYPE_SET1:
169		for (i = 1; i < idx - 1; i++) {
170			unsigned int key = kbd->data[i];
171			int up = key & HIL_KBD_SET1_UPBIT;
172
173			key &= (~HIL_KBD_SET1_UPBIT & 0xff);
174			key = hil_kbd_set1[key >> HIL_KBD_SET1_SHIFT];
175			input_report_key(dev, key, !up);
176		}
177		break;
178
179	case HIL_POL_CHARTYPE_SET2:
180		for (i = 1; i < idx - 1; i++) {
181			unsigned int key = kbd->data[i];
182			int up = key & HIL_KBD_SET2_UPBIT;
183
184			key &= (~HIL_KBD_SET1_UPBIT & 0xff);
185			key = key >> HIL_KBD_SET2_SHIFT;
186			input_report_key(dev, key, !up);
187		}
188		break;
189
190	case HIL_POL_CHARTYPE_SET3:
191		for (i = 1; i < idx - 1; i++) {
192			unsigned int key = kbd->data[i];
193			int up = key & HIL_KBD_SET3_UPBIT;
194
195			key &= (~HIL_KBD_SET1_UPBIT & 0xff);
196			key = hil_kbd_set3[key >> HIL_KBD_SET3_SHIFT];
197			input_report_key(dev, key, !up);
198		}
199		break;
200	}
201
202	input_sync(dev);
203}
204
205static void hil_dev_handle_ptr_events(struct hil_dev *ptr)
206{
207	struct input_dev *dev = ptr->dev;
208	int idx = ptr->idx4 / 4;
209	hil_packet p = ptr->data[idx - 1];
210	int i, cnt, laxis;
211	bool absdev, ax16;
212
213	if ((p & HIL_CMDCT_POL) != idx - 1) {
214		printk(KERN_WARNING PREFIX
215			"Malformed poll packet %x (idx = %i)\n", p, idx);
216		return;
217	}
218
219	i = (p & HIL_POL_AXIS_ALT) ? 3 : 0;
220	laxis = (p & HIL_POL_NUM_AXES_MASK) + i;
221
222	ax16 = ptr->idd[1] & HIL_IDD_HEADER_16BIT; /* 8 or 16bit resolution */
223	absdev = ptr->idd[1] & HIL_IDD_HEADER_ABS;
224
225	for (cnt = 1; i < laxis; i++) {
226		unsigned int lo, hi, val;
227
228		lo = ptr->data[cnt++] & HIL_PKT_DATA_MASK;
229		hi = ax16 ? (ptr->data[cnt++] & HIL_PKT_DATA_MASK) : 0;
230
231		if (absdev) {
232			val = lo + (hi << 8);
233#ifdef TABLET_AUTOADJUST
234			if (val < input_abs_get_min(dev, ABS_X + i))
235				input_abs_set_min(dev, ABS_X + i, val);
236			if (val > input_abs_get_max(dev, ABS_X + i))
237				input_abs_set_max(dev, ABS_X + i, val);
238#endif
239			if (i % 3)
240				val = input_abs_get_max(dev, ABS_X + i) - val;
241			input_report_abs(dev, ABS_X + i, val);
242		} else {
243			val = (int) (((int8_t) lo) | ((int8_t) hi << 8));
244			if (i % 3)
245				val *= -1;
246			input_report_rel(dev, REL_X + i, val);
247		}
248	}
249
250	while (cnt < idx - 1) {
251		unsigned int btn = ptr->data[cnt++];
252		int up = btn & 1;
253
254		btn &= 0xfe;
255		if (btn == 0x8e)
256			continue; /* TODO: proximity == touch? */
257		if (btn > 0x8c || btn < 0x80)
258			continue;
259		btn = (btn - 0x80) >> 1;
260		btn = ptr->btnmap[btn];
261		input_report_key(dev, btn, !up);
262	}
263
264	input_sync(dev);
265}
266
267static void hil_dev_process_err(struct hil_dev *dev)
268{
269	printk(KERN_WARNING PREFIX "errored HIL packet\n");
270	dev->idx4 = 0;
271	complete(&dev->cmd_done); /* just in case somebody is waiting */
272}
273
274static irqreturn_t hil_dev_interrupt(struct serio *serio,
275				unsigned char data, unsigned int flags)
276{
277	struct hil_dev *dev;
278	hil_packet packet;
279	int idx;
280
281	dev = serio_get_drvdata(serio);
282	BUG_ON(dev == NULL);
283
284	if (dev->idx4 >= HIL_PACKET_MAX_LENGTH * sizeof(hil_packet)) {
285		hil_dev_process_err(dev);
286		goto out;
287	}
288
289	idx = dev->idx4 / 4;
290	if (!(dev->idx4 % 4))
291		dev->data[idx] = 0;
292	packet = dev->data[idx];
293	packet |= ((hil_packet)data) << ((3 - (dev->idx4 % 4)) * 8);
294	dev->data[idx] = packet;
295
296	/* Records of N 4-byte hil_packets must terminate with a command. */
297	if ((++dev->idx4 % 4) == 0) {
298		if ((packet & 0xffff0000) != HIL_ERR_INT) {
299			hil_dev_process_err(dev);
300		} else if (packet & HIL_PKT_CMD) {
301			if (hil_dev_is_command_response(packet))
302				hil_dev_handle_command_response(dev);
303			else if (dev->is_pointer)
304				hil_dev_handle_ptr_events(dev);
305			else
306				hil_dev_handle_kbd_events(dev);
307			dev->idx4 = 0;
308		}
309	}
310 out:
311	return IRQ_HANDLED;
312}
313
314static void hil_dev_disconnect(struct serio *serio)
315{
316	struct hil_dev *dev = serio_get_drvdata(serio);
317
318	BUG_ON(dev == NULL);
319
320	serio_close(serio);
321	input_unregister_device(dev->dev);
322	serio_set_drvdata(serio, NULL);
323	kfree(dev);
324}
325
326static void hil_dev_keyboard_setup(struct hil_dev *kbd)
327{
328	struct input_dev *input_dev = kbd->dev;
329	uint8_t did = kbd->idd[0];
330	int i;
331
332	input_dev->evbit[0]	= BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
333	input_dev->ledbit[0]	= BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) |
334				  BIT_MASK(LED_SCROLLL);
335
336	for (i = 0; i < 128; i++) {
337		__set_bit(hil_kbd_set1[i], input_dev->keybit);
338		__set_bit(hil_kbd_set3[i], input_dev->keybit);
339	}
340	__clear_bit(KEY_RESERVED, input_dev->keybit);
341
342	input_dev->keycodemax	= HIL_KEYCODES_SET1_TBLSIZE;
343	input_dev->keycodesize	= sizeof(hil_kbd_set1[0]);
344	input_dev->keycode	= hil_kbd_set1;
345
346	input_dev->name	= strlen(kbd->rnm) ? kbd->rnm : "HIL keyboard";
347	input_dev->phys	= "hpkbd/input0";
348
349	printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n",
350		did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]);
351}
352
353static void hil_dev_pointer_setup(struct hil_dev *ptr)
354{
355	struct input_dev *input_dev = ptr->dev;
356	uint8_t did = ptr->idd[0];
357	uint8_t *idd = ptr->idd + 1;
358	unsigned int naxsets = HIL_IDD_NUM_AXSETS(*idd);
359	unsigned int i, btntype;
360	const char *txt;
361
362	ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd);
363
364	switch (did & HIL_IDD_DID_TYPE_MASK) {
365	case HIL_IDD_DID_TYPE_REL:
366		input_dev->evbit[0] = BIT_MASK(EV_REL);
367
368		for (i = 0; i < ptr->naxes; i++)
369			__set_bit(REL_X + i, input_dev->relbit);
370
371		for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++)
372			__set_bit(REL_X + i, input_dev->relbit);
373
374		txt = "relative";
375		break;
376
377	case HIL_IDD_DID_TYPE_ABS:
378		input_dev->evbit[0] = BIT_MASK(EV_ABS);
379
380		for (i = 0; i < ptr->naxes; i++)
381			input_set_abs_params(input_dev, ABS_X + i,
382					0, HIL_IDD_AXIS_MAX(idd, i), 0, 0);
383
384		for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++)
385			input_set_abs_params(input_dev, ABS_X + i,
386					0, HIL_IDD_AXIS_MAX(idd, i - 3), 0, 0);
387
388#ifdef TABLET_AUTOADJUST
389		for (i = 0; i < ABS_MAX; i++) {
390			int diff = input_abs_get_max(input_dev, ABS_X + i) / 10;
391			input_abs_set_min(input_dev, ABS_X + i,
392				input_abs_get_min(input_dev, ABS_X + i) + diff);
393			input_abs_set_max(input_dev, ABS_X + i,
394				input_abs_get_max(input_dev, ABS_X + i) - diff);
395		}
396#endif
397
398		txt = "absolute";
399		break;
400
401	default:
402		BUG();
403	}
404
405	ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd);
406	if (ptr->nbtn)
407		input_dev->evbit[0] |= BIT_MASK(EV_KEY);
408
409	btntype = BTN_MISC;
410	if ((did & HIL_IDD_DID_ABS_TABLET_MASK) == HIL_IDD_DID_ABS_TABLET)
411#ifdef TABLET_SIMULATES_MOUSE
412		btntype = BTN_TOUCH;
413#else
414		btntype = BTN_DIGI;
415#endif
416	if ((did & HIL_IDD_DID_ABS_TSCREEN_MASK) == HIL_IDD_DID_ABS_TSCREEN)
417		btntype = BTN_TOUCH;
418
419	if ((did & HIL_IDD_DID_REL_MOUSE_MASK) == HIL_IDD_DID_REL_MOUSE)
420		btntype = BTN_MOUSE;
421
422	for (i = 0; i < ptr->nbtn; i++) {
423		__set_bit(btntype | i, input_dev->keybit);
424		ptr->btnmap[i] = btntype | i;
425	}
426
427	if (btntype == BTN_MOUSE) {
428		/* Swap buttons 2 and 3 */
429		ptr->btnmap[1] = BTN_MIDDLE;
430		ptr->btnmap[2] = BTN_RIGHT;
431	}
432
433	input_dev->name = strlen(ptr->rnm) ? ptr->rnm : "HIL pointer device";
434
435	printk(KERN_INFO PREFIX
436		"HIL pointer device found (did: 0x%02x, axis: %s)\n",
437		did, txt);
438	printk(KERN_INFO PREFIX
439		"HIL pointer has %i buttons and %i sets of %i axes\n",
440		ptr->nbtn, naxsets, ptr->naxes);
441}
442
443static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
444{
445	struct hil_dev *dev;
446	struct input_dev *input_dev;
447	uint8_t did, *idd;
448	int error;
449
450	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
451	input_dev = input_allocate_device();
452	if (!dev || !input_dev) {
453		error = -ENOMEM;
454		goto bail0;
455	}
456
457	dev->serio = serio;
458	dev->dev = input_dev;
459
460	error = serio_open(serio, drv);
461	if (error)
462		goto bail0;
463
464	serio_set_drvdata(serio, dev);
465
466	/* Get device info.  MLC driver supplies devid/status/etc. */
467	init_completion(&dev->cmd_done);
468	serio_write(serio, 0);
469	serio_write(serio, 0);
470	serio_write(serio, HIL_PKT_CMD >> 8);
471	serio_write(serio, HIL_CMD_IDD);
472	error = wait_for_completion_killable(&dev->cmd_done);
473	if (error)
474		goto bail1;
475
476	reinit_completion(&dev->cmd_done);
477	serio_write(serio, 0);
478	serio_write(serio, 0);
479	serio_write(serio, HIL_PKT_CMD >> 8);
480	serio_write(serio, HIL_CMD_RSC);
481	error = wait_for_completion_killable(&dev->cmd_done);
482	if (error)
483		goto bail1;
484
485	reinit_completion(&dev->cmd_done);
486	serio_write(serio, 0);
487	serio_write(serio, 0);
488	serio_write(serio, HIL_PKT_CMD >> 8);
489	serio_write(serio, HIL_CMD_RNM);
490	error = wait_for_completion_killable(&dev->cmd_done);
491	if (error)
492		goto bail1;
493
494	reinit_completion(&dev->cmd_done);
495	serio_write(serio, 0);
496	serio_write(serio, 0);
497	serio_write(serio, HIL_PKT_CMD >> 8);
498	serio_write(serio, HIL_CMD_EXD);
499	error = wait_for_completion_killable(&dev->cmd_done);
500	if (error)
501		goto bail1;
502
503	did = dev->idd[0];
504	idd = dev->idd + 1;
505
506	switch (did & HIL_IDD_DID_TYPE_MASK) {
507	case HIL_IDD_DID_TYPE_KB_INTEGRAL:
508	case HIL_IDD_DID_TYPE_KB_ITF:
509	case HIL_IDD_DID_TYPE_KB_RSVD:
510	case HIL_IDD_DID_TYPE_CHAR:
511		if (HIL_IDD_NUM_BUTTONS(idd) ||
512		    HIL_IDD_NUM_AXES_PER_SET(*idd)) {
513			printk(KERN_INFO PREFIX
514				"combo devices are not supported.\n");
515			goto bail1;
516		}
517
518		dev->is_pointer = false;
519		hil_dev_keyboard_setup(dev);
520		break;
521
522	case HIL_IDD_DID_TYPE_REL:
523	case HIL_IDD_DID_TYPE_ABS:
524		dev->is_pointer = true;
525		hil_dev_pointer_setup(dev);
526		break;
527
528	default:
529		goto bail1;
530	}
531
532	input_dev->id.bustype	= BUS_HIL;
533	input_dev->id.vendor	= PCI_VENDOR_ID_HP;
534	input_dev->id.product	= 0x0001; /* TODO: get from kbd->rsc */
535	input_dev->id.version	= 0x0100; /* TODO: get from kbd->rsc */
536	input_dev->dev.parent	= &serio->dev;
537
538	if (!dev->is_pointer) {
539		serio_write(serio, 0);
540		serio_write(serio, 0);
541		serio_write(serio, HIL_PKT_CMD >> 8);
542		/* Enable Keyswitch Autorepeat 1 */
543		serio_write(serio, HIL_CMD_EK1);
544		/* No need to wait for completion */
545	}
546
547	error = input_register_device(input_dev);
548	if (error)
549		goto bail1;
550
551	return 0;
552
553 bail1:
554	serio_close(serio);
555	serio_set_drvdata(serio, NULL);
556 bail0:
557	input_free_device(input_dev);
558	kfree(dev);
559	return error;
560}
561
562static struct serio_device_id hil_dev_ids[] = {
563	{
564		.type = SERIO_HIL_MLC,
565		.proto = SERIO_HIL,
566		.id = SERIO_ANY,
567		.extra = SERIO_ANY,
568	},
569	{ 0 }
570};
571
572MODULE_DEVICE_TABLE(serio, hil_dev_ids);
573
574static struct serio_driver hil_serio_drv = {
575	.driver		= {
576		.name	= "hil_dev",
577	},
578	.description	= "HP HIL keyboard/mouse/tablet driver",
579	.id_table	= hil_dev_ids,
580	.connect	= hil_dev_connect,
581	.disconnect	= hil_dev_disconnect,
582	.interrupt	= hil_dev_interrupt
583};
584
585module_serio_driver(hil_serio_drv);
586