1/* 2 * HID Sensors Driver 3 * Copyright (c) 2012, Intel Corporation. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms and conditions of the GNU General Public License, 7 * version 2, as published by the Free Software Foundation. 8 * 9 * This program is distributed in the hope it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 * You should have received a copy of the GNU General Public License along with 15 * this program; if not, write to the Free Software Foundation, Inc., 16 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 17 * 18 */ 19#include <linux/device.h> 20#include <linux/platform_device.h> 21#include <linux/module.h> 22#include <linux/interrupt.h> 23#include <linux/irq.h> 24#include <linux/slab.h> 25#include <linux/delay.h> 26#include <linux/hid-sensor-hub.h> 27#include <linux/iio/iio.h> 28#include <linux/iio/sysfs.h> 29#include <linux/iio/buffer.h> 30#include <linux/iio/trigger_consumer.h> 31#include <linux/iio/triggered_buffer.h> 32#include "../common/hid-sensors/hid-sensor-trigger.h" 33 34enum magn_3d_channel { 35 CHANNEL_SCAN_INDEX_X, 36 CHANNEL_SCAN_INDEX_Y, 37 CHANNEL_SCAN_INDEX_Z, 38 CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP, 39 CHANNEL_SCAN_INDEX_NORTH_TRUE_TILT_COMP, 40 CHANNEL_SCAN_INDEX_NORTH_MAGN, 41 CHANNEL_SCAN_INDEX_NORTH_TRUE, 42 MAGN_3D_CHANNEL_MAX, 43}; 44 45struct magn_3d_state { 46 struct hid_sensor_hub_callbacks callbacks; 47 struct hid_sensor_common common_attributes; 48 struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX]; 49 50 /* dynamically sized array to hold sensor values */ 51 u32 *iio_vals; 52 /* array of pointers to sensor value */ 53 u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX]; 54 55 int scale_pre_decml; 56 int scale_post_decml; 57 int scale_precision; 58 int value_offset; 59}; 60 61static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = { 62 HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS, 63 HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS, 64 HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS, 65 HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH, 66 HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH, 67 HID_USAGE_SENSOR_ORIENT_MAGN_NORTH, 68 HID_USAGE_SENSOR_ORIENT_TRUE_NORTH, 69}; 70 71/* Channel definitions */ 72static const struct iio_chan_spec magn_3d_channels[] = { 73 { 74 .type = IIO_MAGN, 75 .modified = 1, 76 .channel2 = IIO_MOD_X, 77 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 78 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 79 BIT(IIO_CHAN_INFO_SCALE) | 80 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 81 BIT(IIO_CHAN_INFO_HYSTERESIS), 82 }, { 83 .type = IIO_MAGN, 84 .modified = 1, 85 .channel2 = IIO_MOD_Y, 86 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 87 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 88 BIT(IIO_CHAN_INFO_SCALE) | 89 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 90 BIT(IIO_CHAN_INFO_HYSTERESIS), 91 }, { 92 .type = IIO_MAGN, 93 .modified = 1, 94 .channel2 = IIO_MOD_Z, 95 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 96 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 97 BIT(IIO_CHAN_INFO_SCALE) | 98 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 99 BIT(IIO_CHAN_INFO_HYSTERESIS), 100 }, { 101 .type = IIO_ROT, 102 .modified = 1, 103 .channel2 = IIO_MOD_NORTH_MAGN_TILT_COMP, 104 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 105 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 106 BIT(IIO_CHAN_INFO_SCALE) | 107 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 108 BIT(IIO_CHAN_INFO_HYSTERESIS), 109 }, { 110 .type = IIO_ROT, 111 .modified = 1, 112 .channel2 = IIO_MOD_NORTH_TRUE_TILT_COMP, 113 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 114 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 115 BIT(IIO_CHAN_INFO_SCALE) | 116 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 117 BIT(IIO_CHAN_INFO_HYSTERESIS), 118 }, { 119 .type = IIO_ROT, 120 .modified = 1, 121 .channel2 = IIO_MOD_NORTH_MAGN, 122 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 123 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 124 BIT(IIO_CHAN_INFO_SCALE) | 125 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 126 BIT(IIO_CHAN_INFO_HYSTERESIS), 127 }, { 128 .type = IIO_ROT, 129 .modified = 1, 130 .channel2 = IIO_MOD_NORTH_TRUE, 131 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 132 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 133 BIT(IIO_CHAN_INFO_SCALE) | 134 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 135 BIT(IIO_CHAN_INFO_HYSTERESIS), 136 } 137}; 138 139/* Adjust channel real bits based on report descriptor */ 140static void magn_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels, 141 int channel, int size) 142{ 143 channels[channel].scan_type.sign = 's'; 144 /* Real storage bits will change based on the report desc. */ 145 channels[channel].scan_type.realbits = size * 8; 146 /* Maximum size of a sample to capture is u32 */ 147 channels[channel].scan_type.storagebits = sizeof(u32) * 8; 148} 149 150/* Channel read_raw handler */ 151static int magn_3d_read_raw(struct iio_dev *indio_dev, 152 struct iio_chan_spec const *chan, 153 int *val, int *val2, 154 long mask) 155{ 156 struct magn_3d_state *magn_state = iio_priv(indio_dev); 157 int report_id = -1; 158 u32 address; 159 int ret_type; 160 161 *val = 0; 162 *val2 = 0; 163 switch (mask) { 164 case 0: 165 hid_sensor_power_state(&magn_state->common_attributes, true); 166 report_id = 167 magn_state->magn[chan->address].report_id; 168 address = magn_3d_addresses[chan->address]; 169 if (report_id >= 0) 170 *val = sensor_hub_input_attr_get_raw_value( 171 magn_state->common_attributes.hsdev, 172 HID_USAGE_SENSOR_COMPASS_3D, address, 173 report_id, 174 SENSOR_HUB_SYNC); 175 else { 176 *val = 0; 177 hid_sensor_power_state(&magn_state->common_attributes, 178 false); 179 return -EINVAL; 180 } 181 hid_sensor_power_state(&magn_state->common_attributes, false); 182 ret_type = IIO_VAL_INT; 183 break; 184 case IIO_CHAN_INFO_SCALE: 185 *val = magn_state->scale_pre_decml; 186 *val2 = magn_state->scale_post_decml; 187 ret_type = magn_state->scale_precision; 188 break; 189 case IIO_CHAN_INFO_OFFSET: 190 *val = magn_state->value_offset; 191 ret_type = IIO_VAL_INT; 192 break; 193 case IIO_CHAN_INFO_SAMP_FREQ: 194 ret_type = hid_sensor_read_samp_freq_value( 195 &magn_state->common_attributes, val, val2); 196 break; 197 case IIO_CHAN_INFO_HYSTERESIS: 198 ret_type = hid_sensor_read_raw_hyst_value( 199 &magn_state->common_attributes, val, val2); 200 break; 201 default: 202 ret_type = -EINVAL; 203 break; 204 } 205 206 return ret_type; 207} 208 209/* Channel write_raw handler */ 210static int magn_3d_write_raw(struct iio_dev *indio_dev, 211 struct iio_chan_spec const *chan, 212 int val, 213 int val2, 214 long mask) 215{ 216 struct magn_3d_state *magn_state = iio_priv(indio_dev); 217 int ret = 0; 218 219 switch (mask) { 220 case IIO_CHAN_INFO_SAMP_FREQ: 221 ret = hid_sensor_write_samp_freq_value( 222 &magn_state->common_attributes, val, val2); 223 break; 224 case IIO_CHAN_INFO_HYSTERESIS: 225 ret = hid_sensor_write_raw_hyst_value( 226 &magn_state->common_attributes, val, val2); 227 break; 228 default: 229 ret = -EINVAL; 230 } 231 232 return ret; 233} 234 235static const struct iio_info magn_3d_info = { 236 .driver_module = THIS_MODULE, 237 .read_raw = &magn_3d_read_raw, 238 .write_raw = &magn_3d_write_raw, 239}; 240 241/* Function to push data to buffer */ 242static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data) 243{ 244 dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n"); 245 iio_push_to_buffers(indio_dev, data); 246} 247 248/* Callback handler to send event after all samples are received and captured */ 249static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev, 250 unsigned usage_id, 251 void *priv) 252{ 253 struct iio_dev *indio_dev = platform_get_drvdata(priv); 254 struct magn_3d_state *magn_state = iio_priv(indio_dev); 255 256 dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n"); 257 if (atomic_read(&magn_state->common_attributes.data_ready)) 258 hid_sensor_push_data(indio_dev, magn_state->iio_vals); 259 260 return 0; 261} 262 263/* Capture samples in local storage */ 264static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev, 265 unsigned usage_id, 266 size_t raw_len, char *raw_data, 267 void *priv) 268{ 269 struct iio_dev *indio_dev = platform_get_drvdata(priv); 270 struct magn_3d_state *magn_state = iio_priv(indio_dev); 271 int offset; 272 int ret = 0; 273 u32 *iio_val = NULL; 274 275 switch (usage_id) { 276 case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS: 277 case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS: 278 case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS: 279 offset = (usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS) 280 + CHANNEL_SCAN_INDEX_X; 281 break; 282 case HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH: 283 case HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH: 284 case HID_USAGE_SENSOR_ORIENT_MAGN_NORTH: 285 case HID_USAGE_SENSOR_ORIENT_TRUE_NORTH: 286 offset = (usage_id - HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH) 287 + CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP; 288 break; 289 default: 290 return -EINVAL; 291 } 292 293 iio_val = magn_state->magn_val_addr[offset]; 294 295 if (iio_val != NULL) 296 *iio_val = *((u32 *)raw_data); 297 else 298 ret = -EINVAL; 299 300 return ret; 301} 302 303/* Parse report which is specific to an usage id*/ 304static int magn_3d_parse_report(struct platform_device *pdev, 305 struct hid_sensor_hub_device *hsdev, 306 struct iio_chan_spec **channels, 307 int *chan_count, 308 unsigned usage_id, 309 struct magn_3d_state *st) 310{ 311 int i; 312 int attr_count = 0; 313 struct iio_chan_spec *_channels; 314 315 /* Scan for each usage attribute supported */ 316 for (i = 0; i < MAGN_3D_CHANNEL_MAX; i++) { 317 int status; 318 u32 address = magn_3d_addresses[i]; 319 320 /* Check if usage attribute exists in the sensor hub device */ 321 status = sensor_hub_input_get_attribute_info(hsdev, 322 HID_INPUT_REPORT, 323 usage_id, 324 address, 325 &(st->magn[i])); 326 if (!status) 327 attr_count++; 328 } 329 330 if (attr_count <= 0) { 331 dev_err(&pdev->dev, 332 "failed to find any supported usage attributes in report\n"); 333 return -EINVAL; 334 } 335 336 dev_dbg(&pdev->dev, "magn_3d Found %d usage attributes\n", 337 attr_count); 338 dev_dbg(&pdev->dev, "magn_3d X: %x:%x Y: %x:%x Z: %x:%x\n", 339 st->magn[0].index, 340 st->magn[0].report_id, 341 st->magn[1].index, st->magn[1].report_id, 342 st->magn[2].index, st->magn[2].report_id); 343 344 /* Setup IIO channel array */ 345 _channels = devm_kcalloc(&pdev->dev, attr_count, 346 sizeof(struct iio_chan_spec), 347 GFP_KERNEL); 348 if (!_channels) { 349 dev_err(&pdev->dev, 350 "failed to allocate space for iio channels\n"); 351 return -ENOMEM; 352 } 353 354 st->iio_vals = devm_kcalloc(&pdev->dev, attr_count, 355 sizeof(u32), 356 GFP_KERNEL); 357 if (!st->iio_vals) { 358 dev_err(&pdev->dev, 359 "failed to allocate space for iio values array\n"); 360 return -ENOMEM; 361 } 362 363 for (i = 0, *chan_count = 0; 364 i < MAGN_3D_CHANNEL_MAX && *chan_count < attr_count; 365 i++){ 366 if (st->magn[i].index >= 0) { 367 /* Setup IIO channel struct */ 368 (_channels[*chan_count]) = magn_3d_channels[i]; 369 (_channels[*chan_count]).scan_index = *chan_count; 370 (_channels[*chan_count]).address = i; 371 372 /* Set magn_val_addr to iio value address */ 373 st->magn_val_addr[i] = &(st->iio_vals[*chan_count]); 374 magn_3d_adjust_channel_bit_mask(_channels, 375 *chan_count, 376 st->magn[i].size); 377 (*chan_count)++; 378 } 379 } 380 381 if (*chan_count <= 0) { 382 dev_err(&pdev->dev, 383 "failed to find any magnetic channels setup\n"); 384 return -EINVAL; 385 } 386 387 *channels = _channels; 388 389 dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n", 390 *chan_count); 391 392 st->scale_precision = hid_sensor_format_scale( 393 HID_USAGE_SENSOR_COMPASS_3D, 394 &st->magn[CHANNEL_SCAN_INDEX_X], 395 &st->scale_pre_decml, &st->scale_post_decml); 396 397 /* Set Sensitivity field ids, when there is no individual modifier */ 398 if (st->common_attributes.sensitivity.index < 0) { 399 sensor_hub_input_get_attribute_info(hsdev, 400 HID_FEATURE_REPORT, usage_id, 401 HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | 402 HID_USAGE_SENSOR_DATA_ORIENTATION, 403 &st->common_attributes.sensitivity); 404 dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n", 405 st->common_attributes.sensitivity.index, 406 st->common_attributes.sensitivity.report_id); 407 } 408 409 return 0; 410} 411 412/* Function to initialize the processing for usage id */ 413static int hid_magn_3d_probe(struct platform_device *pdev) 414{ 415 int ret = 0; 416 static char *name = "magn_3d"; 417 struct iio_dev *indio_dev; 418 struct magn_3d_state *magn_state; 419 struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; 420 struct iio_chan_spec *channels; 421 int chan_count = 0; 422 423 indio_dev = devm_iio_device_alloc(&pdev->dev, 424 sizeof(struct magn_3d_state)); 425 if (indio_dev == NULL) 426 return -ENOMEM; 427 428 platform_set_drvdata(pdev, indio_dev); 429 430 magn_state = iio_priv(indio_dev); 431 magn_state->common_attributes.hsdev = hsdev; 432 magn_state->common_attributes.pdev = pdev; 433 434 ret = hid_sensor_parse_common_attributes(hsdev, 435 HID_USAGE_SENSOR_COMPASS_3D, 436 &magn_state->common_attributes); 437 if (ret) { 438 dev_err(&pdev->dev, "failed to setup common attributes\n"); 439 return ret; 440 } 441 442 ret = magn_3d_parse_report(pdev, hsdev, 443 &channels, &chan_count, 444 HID_USAGE_SENSOR_COMPASS_3D, magn_state); 445 if (ret) { 446 dev_err(&pdev->dev, "failed to parse report\n"); 447 return ret; 448 } 449 450 indio_dev->channels = channels; 451 indio_dev->num_channels = chan_count; 452 indio_dev->dev.parent = &pdev->dev; 453 indio_dev->info = &magn_3d_info; 454 indio_dev->name = name; 455 indio_dev->modes = INDIO_DIRECT_MODE; 456 457 ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, 458 NULL, NULL); 459 if (ret) { 460 dev_err(&pdev->dev, "failed to initialize trigger buffer\n"); 461 return ret; 462 } 463 atomic_set(&magn_state->common_attributes.data_ready, 0); 464 ret = hid_sensor_setup_trigger(indio_dev, name, 465 &magn_state->common_attributes); 466 if (ret < 0) { 467 dev_err(&pdev->dev, "trigger setup failed\n"); 468 goto error_unreg_buffer_funcs; 469 } 470 471 ret = iio_device_register(indio_dev); 472 if (ret) { 473 dev_err(&pdev->dev, "device register failed\n"); 474 goto error_remove_trigger; 475 } 476 477 magn_state->callbacks.send_event = magn_3d_proc_event; 478 magn_state->callbacks.capture_sample = magn_3d_capture_sample; 479 magn_state->callbacks.pdev = pdev; 480 ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D, 481 &magn_state->callbacks); 482 if (ret < 0) { 483 dev_err(&pdev->dev, "callback reg failed\n"); 484 goto error_iio_unreg; 485 } 486 487 return ret; 488 489error_iio_unreg: 490 iio_device_unregister(indio_dev); 491error_remove_trigger: 492 hid_sensor_remove_trigger(&magn_state->common_attributes); 493error_unreg_buffer_funcs: 494 iio_triggered_buffer_cleanup(indio_dev); 495 return ret; 496} 497 498/* Function to deinitialize the processing for usage id */ 499static int hid_magn_3d_remove(struct platform_device *pdev) 500{ 501 struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; 502 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 503 struct magn_3d_state *magn_state = iio_priv(indio_dev); 504 505 sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D); 506 iio_device_unregister(indio_dev); 507 hid_sensor_remove_trigger(&magn_state->common_attributes); 508 iio_triggered_buffer_cleanup(indio_dev); 509 510 return 0; 511} 512 513static const struct platform_device_id hid_magn_3d_ids[] = { 514 { 515 /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ 516 .name = "HID-SENSOR-200083", 517 }, 518 { /* sentinel */ } 519}; 520MODULE_DEVICE_TABLE(platform, hid_magn_3d_ids); 521 522static struct platform_driver hid_magn_3d_platform_driver = { 523 .id_table = hid_magn_3d_ids, 524 .driver = { 525 .name = KBUILD_MODNAME, 526 .pm = &hid_sensor_pm_ops, 527 }, 528 .probe = hid_magn_3d_probe, 529 .remove = hid_magn_3d_remove, 530}; 531module_platform_driver(hid_magn_3d_platform_driver); 532 533MODULE_DESCRIPTION("HID Sensor Magnetometer 3D"); 534MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>"); 535MODULE_LICENSE("GPL"); 536