1/* 2 Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and 3 Philip Edelbrock <phil@netroedge.com> 4 5 This program is free software; you can redistribute it and/or modify 6 it under the terms of the GNU General Public License as published by 7 the Free Software Foundation; either version 2 of the License, or 8 (at your option) any later version. 9 10 This program is distributed in the hope that it will be useful, 11 but WITHOUT ANY WARRANTY; without even the implied warranty of 12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 GNU General Public License for more details. 14*/ 15 16/* 17 Supports: 18 Intel PIIX4, 440MX 19 Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 20 ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800 21 AMD Hudson-2, ML, CZ 22 SMSC Victory66 23 24 Note: we assume there can only be one device, with one or more 25 SMBus interfaces. 26*/ 27 28#include <linux/module.h> 29#include <linux/moduleparam.h> 30#include <linux/pci.h> 31#include <linux/kernel.h> 32#include <linux/delay.h> 33#include <linux/stddef.h> 34#include <linux/ioport.h> 35#include <linux/i2c.h> 36#include <linux/slab.h> 37#include <linux/dmi.h> 38#include <linux/acpi.h> 39#include <linux/io.h> 40 41 42/* PIIX4 SMBus address offsets */ 43#define SMBHSTSTS (0 + piix4_smba) 44#define SMBHSLVSTS (1 + piix4_smba) 45#define SMBHSTCNT (2 + piix4_smba) 46#define SMBHSTCMD (3 + piix4_smba) 47#define SMBHSTADD (4 + piix4_smba) 48#define SMBHSTDAT0 (5 + piix4_smba) 49#define SMBHSTDAT1 (6 + piix4_smba) 50#define SMBBLKDAT (7 + piix4_smba) 51#define SMBSLVCNT (8 + piix4_smba) 52#define SMBSHDWCMD (9 + piix4_smba) 53#define SMBSLVEVT (0xA + piix4_smba) 54#define SMBSLVDAT (0xC + piix4_smba) 55 56/* count for request_region */ 57#define SMBIOSIZE 8 58 59/* PCI Address Constants */ 60#define SMBBA 0x090 61#define SMBHSTCFG 0x0D2 62#define SMBSLVC 0x0D3 63#define SMBSHDW1 0x0D4 64#define SMBSHDW2 0x0D5 65#define SMBREV 0x0D6 66 67/* Other settings */ 68#define MAX_TIMEOUT 500 69#define ENABLE_INT9 0 70 71/* PIIX4 constants */ 72#define PIIX4_QUICK 0x00 73#define PIIX4_BYTE 0x04 74#define PIIX4_BYTE_DATA 0x08 75#define PIIX4_WORD_DATA 0x0C 76#define PIIX4_BLOCK_DATA 0x14 77 78/* insmod parameters */ 79 80/* If force is set to anything different from 0, we forcibly enable the 81 PIIX4. DANGEROUS! */ 82static int force; 83module_param (force, int, 0); 84MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); 85 86/* If force_addr is set to anything different from 0, we forcibly enable 87 the PIIX4 at the given address. VERY DANGEROUS! */ 88static int force_addr; 89module_param (force_addr, int, 0); 90MODULE_PARM_DESC(force_addr, 91 "Forcibly enable the PIIX4 at the given address. " 92 "EXTREMELY DANGEROUS!"); 93 94static int srvrworks_csb5_delay; 95static struct pci_driver piix4_driver; 96 97static const struct dmi_system_id piix4_dmi_blacklist[] = { 98 { 99 .ident = "Sapphire AM2RD790", 100 .matches = { 101 DMI_MATCH(DMI_BOARD_VENDOR, "SAPPHIRE Inc."), 102 DMI_MATCH(DMI_BOARD_NAME, "PC-AM2RD790"), 103 }, 104 }, 105 { 106 .ident = "DFI Lanparty UT 790FX", 107 .matches = { 108 DMI_MATCH(DMI_BOARD_VENDOR, "DFI Inc."), 109 DMI_MATCH(DMI_BOARD_NAME, "LP UT 790FX"), 110 }, 111 }, 112 { } 113}; 114 115/* The IBM entry is in a separate table because we only check it 116 on Intel-based systems */ 117static const struct dmi_system_id piix4_dmi_ibm[] = { 118 { 119 .ident = "IBM", 120 .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, 121 }, 122 { }, 123}; 124 125struct i2c_piix4_adapdata { 126 unsigned short smba; 127}; 128 129static int piix4_setup(struct pci_dev *PIIX4_dev, 130 const struct pci_device_id *id) 131{ 132 unsigned char temp; 133 unsigned short piix4_smba; 134 135 if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) && 136 (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5)) 137 srvrworks_csb5_delay = 1; 138 139 /* On some motherboards, it was reported that accessing the SMBus 140 caused severe hardware problems */ 141 if (dmi_check_system(piix4_dmi_blacklist)) { 142 dev_err(&PIIX4_dev->dev, 143 "Accessing the SMBus on this system is unsafe!\n"); 144 return -EPERM; 145 } 146 147 /* Don't access SMBus on IBM systems which get corrupted eeproms */ 148 if (dmi_check_system(piix4_dmi_ibm) && 149 PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) { 150 dev_err(&PIIX4_dev->dev, "IBM system detected; this module " 151 "may corrupt your serial eeprom! Refusing to load " 152 "module!\n"); 153 return -EPERM; 154 } 155 156 /* Determine the address of the SMBus areas */ 157 if (force_addr) { 158 piix4_smba = force_addr & 0xfff0; 159 force = 0; 160 } else { 161 pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba); 162 piix4_smba &= 0xfff0; 163 if(piix4_smba == 0) { 164 dev_err(&PIIX4_dev->dev, "SMBus base address " 165 "uninitialized - upgrade BIOS or use " 166 "force_addr=0xaddr\n"); 167 return -ENODEV; 168 } 169 } 170 171 if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) 172 return -ENODEV; 173 174 if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { 175 dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", 176 piix4_smba); 177 return -EBUSY; 178 } 179 180 pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp); 181 182 /* If force_addr is set, we program the new address here. Just to make 183 sure, we disable the PIIX4 first. */ 184 if (force_addr) { 185 pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe); 186 pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba); 187 pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01); 188 dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to " 189 "new address %04x!\n", piix4_smba); 190 } else if ((temp & 1) == 0) { 191 if (force) { 192 /* This should never need to be done, but has been 193 * noted that many Dell machines have the SMBus 194 * interface on the PIIX4 disabled!? NOTE: This assumes 195 * I/O space and other allocations WERE done by the 196 * Bios! Don't complain if your hardware does weird 197 * things after enabling this. :') Check for Bios 198 * updates before resorting to this. 199 */ 200 pci_write_config_byte(PIIX4_dev, SMBHSTCFG, 201 temp | 1); 202 dev_notice(&PIIX4_dev->dev, 203 "WARNING: SMBus interface has been FORCEFULLY ENABLED!\n"); 204 } else { 205 dev_err(&PIIX4_dev->dev, 206 "SMBus Host Controller not enabled!\n"); 207 release_region(piix4_smba, SMBIOSIZE); 208 return -ENODEV; 209 } 210 } 211 212 if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2)) 213 dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n"); 214 else if ((temp & 0x0E) == 0) 215 dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n"); 216 else 217 dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration " 218 "(or code out of date)!\n"); 219 220 pci_read_config_byte(PIIX4_dev, SMBREV, &temp); 221 dev_info(&PIIX4_dev->dev, 222 "SMBus Host Controller at 0x%x, revision %d\n", 223 piix4_smba, temp); 224 225 return piix4_smba; 226} 227 228static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, 229 const struct pci_device_id *id, u8 aux) 230{ 231 unsigned short piix4_smba; 232 unsigned short smba_idx = 0xcd6; 233 u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status; 234 u8 i2ccfg, i2ccfg_offset = 0x10; 235 236 /* SB800 and later SMBus does not support forcing address */ 237 if (force || force_addr) { 238 dev_err(&PIIX4_dev->dev, "SMBus does not support " 239 "forcing address!\n"); 240 return -EINVAL; 241 } 242 243 /* Determine the address of the SMBus areas */ 244 if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && 245 PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && 246 PIIX4_dev->revision >= 0x41) || 247 (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && 248 PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS && 249 PIIX4_dev->revision >= 0x49)) 250 smb_en = 0x00; 251 else 252 smb_en = (aux) ? 0x28 : 0x2c; 253 254 if (!request_region(smba_idx, 2, "smba_idx")) { 255 dev_err(&PIIX4_dev->dev, "SMBus base address index region " 256 "0x%x already in use!\n", smba_idx); 257 return -EBUSY; 258 } 259 outb_p(smb_en, smba_idx); 260 smba_en_lo = inb_p(smba_idx + 1); 261 outb_p(smb_en + 1, smba_idx); 262 smba_en_hi = inb_p(smba_idx + 1); 263 release_region(smba_idx, 2); 264 265 if (!smb_en) { 266 smb_en_status = smba_en_lo & 0x10; 267 piix4_smba = smba_en_hi << 8; 268 if (aux) 269 piix4_smba |= 0x20; 270 } else { 271 smb_en_status = smba_en_lo & 0x01; 272 piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; 273 } 274 275 if (!smb_en_status) { 276 dev_err(&PIIX4_dev->dev, 277 "SMBus Host Controller not enabled!\n"); 278 return -ENODEV; 279 } 280 281 if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) 282 return -ENODEV; 283 284 if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { 285 dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", 286 piix4_smba); 287 return -EBUSY; 288 } 289 290 /* Aux SMBus does not support IRQ information */ 291 if (aux) { 292 dev_info(&PIIX4_dev->dev, 293 "Auxiliary SMBus Host Controller at 0x%x\n", 294 piix4_smba); 295 return piix4_smba; 296 } 297 298 /* Request the SMBus I2C bus config region */ 299 if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) { 300 dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region " 301 "0x%x already in use!\n", piix4_smba + i2ccfg_offset); 302 release_region(piix4_smba, SMBIOSIZE); 303 return -EBUSY; 304 } 305 i2ccfg = inb_p(piix4_smba + i2ccfg_offset); 306 release_region(piix4_smba + i2ccfg_offset, 1); 307 308 if (i2ccfg & 1) 309 dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n"); 310 else 311 dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n"); 312 313 dev_info(&PIIX4_dev->dev, 314 "SMBus Host Controller at 0x%x, revision %d\n", 315 piix4_smba, i2ccfg >> 4); 316 317 return piix4_smba; 318} 319 320static int piix4_setup_aux(struct pci_dev *PIIX4_dev, 321 const struct pci_device_id *id, 322 unsigned short base_reg_addr) 323{ 324 /* Set up auxiliary SMBus controllers found on some 325 * AMD chipsets e.g. SP5100 (SB700 derivative) */ 326 327 unsigned short piix4_smba; 328 329 /* Read address of auxiliary SMBus controller */ 330 pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba); 331 if ((piix4_smba & 1) == 0) { 332 dev_dbg(&PIIX4_dev->dev, 333 "Auxiliary SMBus controller not enabled\n"); 334 return -ENODEV; 335 } 336 337 piix4_smba &= 0xfff0; 338 if (piix4_smba == 0) { 339 dev_dbg(&PIIX4_dev->dev, 340 "Auxiliary SMBus base address uninitialized\n"); 341 return -ENODEV; 342 } 343 344 if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) 345 return -ENODEV; 346 347 if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { 348 dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x " 349 "already in use!\n", piix4_smba); 350 return -EBUSY; 351 } 352 353 dev_info(&PIIX4_dev->dev, 354 "Auxiliary SMBus Host Controller at 0x%x\n", 355 piix4_smba); 356 357 return piix4_smba; 358} 359 360static int piix4_transaction(struct i2c_adapter *piix4_adapter) 361{ 362 struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(piix4_adapter); 363 unsigned short piix4_smba = adapdata->smba; 364 int temp; 365 int result = 0; 366 int timeout = 0; 367 368 dev_dbg(&piix4_adapter->dev, "Transaction (pre): CNT=%02x, CMD=%02x, " 369 "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), 370 inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), 371 inb_p(SMBHSTDAT1)); 372 373 /* Make sure the SMBus host is ready to start transmitting */ 374 if ((temp = inb_p(SMBHSTSTS)) != 0x00) { 375 dev_dbg(&piix4_adapter->dev, "SMBus busy (%02x). " 376 "Resetting...\n", temp); 377 outb_p(temp, SMBHSTSTS); 378 if ((temp = inb_p(SMBHSTSTS)) != 0x00) { 379 dev_err(&piix4_adapter->dev, "Failed! (%02x)\n", temp); 380 return -EBUSY; 381 } else { 382 dev_dbg(&piix4_adapter->dev, "Successful!\n"); 383 } 384 } 385 386 /* start the transaction by setting bit 6 */ 387 outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); 388 389 /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */ 390 if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */ 391 msleep(2); 392 else 393 msleep(1); 394 395 while ((++timeout < MAX_TIMEOUT) && 396 ((temp = inb_p(SMBHSTSTS)) & 0x01)) 397 msleep(1); 398 399 /* If the SMBus is still busy, we give up */ 400 if (timeout == MAX_TIMEOUT) { 401 dev_err(&piix4_adapter->dev, "SMBus Timeout!\n"); 402 result = -ETIMEDOUT; 403 } 404 405 if (temp & 0x10) { 406 result = -EIO; 407 dev_err(&piix4_adapter->dev, "Error: Failed bus transaction\n"); 408 } 409 410 if (temp & 0x08) { 411 result = -EIO; 412 dev_dbg(&piix4_adapter->dev, "Bus collision! SMBus may be " 413 "locked until next hard reset. (sorry!)\n"); 414 /* Clock stops and slave is stuck in mid-transmission */ 415 } 416 417 if (temp & 0x04) { 418 result = -ENXIO; 419 dev_dbg(&piix4_adapter->dev, "Error: no response!\n"); 420 } 421 422 if (inb_p(SMBHSTSTS) != 0x00) 423 outb_p(inb(SMBHSTSTS), SMBHSTSTS); 424 425 if ((temp = inb_p(SMBHSTSTS)) != 0x00) { 426 dev_err(&piix4_adapter->dev, "Failed reset at end of " 427 "transaction (%02x)\n", temp); 428 } 429 dev_dbg(&piix4_adapter->dev, "Transaction (post): CNT=%02x, CMD=%02x, " 430 "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), 431 inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), 432 inb_p(SMBHSTDAT1)); 433 return result; 434} 435 436/* Return negative errno on error. */ 437static s32 piix4_access(struct i2c_adapter * adap, u16 addr, 438 unsigned short flags, char read_write, 439 u8 command, int size, union i2c_smbus_data * data) 440{ 441 struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); 442 unsigned short piix4_smba = adapdata->smba; 443 int i, len; 444 int status; 445 446 switch (size) { 447 case I2C_SMBUS_QUICK: 448 outb_p((addr << 1) | read_write, 449 SMBHSTADD); 450 size = PIIX4_QUICK; 451 break; 452 case I2C_SMBUS_BYTE: 453 outb_p((addr << 1) | read_write, 454 SMBHSTADD); 455 if (read_write == I2C_SMBUS_WRITE) 456 outb_p(command, SMBHSTCMD); 457 size = PIIX4_BYTE; 458 break; 459 case I2C_SMBUS_BYTE_DATA: 460 outb_p((addr << 1) | read_write, 461 SMBHSTADD); 462 outb_p(command, SMBHSTCMD); 463 if (read_write == I2C_SMBUS_WRITE) 464 outb_p(data->byte, SMBHSTDAT0); 465 size = PIIX4_BYTE_DATA; 466 break; 467 case I2C_SMBUS_WORD_DATA: 468 outb_p((addr << 1) | read_write, 469 SMBHSTADD); 470 outb_p(command, SMBHSTCMD); 471 if (read_write == I2C_SMBUS_WRITE) { 472 outb_p(data->word & 0xff, SMBHSTDAT0); 473 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); 474 } 475 size = PIIX4_WORD_DATA; 476 break; 477 case I2C_SMBUS_BLOCK_DATA: 478 outb_p((addr << 1) | read_write, 479 SMBHSTADD); 480 outb_p(command, SMBHSTCMD); 481 if (read_write == I2C_SMBUS_WRITE) { 482 len = data->block[0]; 483 if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) 484 return -EINVAL; 485 outb_p(len, SMBHSTDAT0); 486 i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ 487 for (i = 1; i <= len; i++) 488 outb_p(data->block[i], SMBBLKDAT); 489 } 490 size = PIIX4_BLOCK_DATA; 491 break; 492 default: 493 dev_warn(&adap->dev, "Unsupported transaction %d\n", size); 494 return -EOPNOTSUPP; 495 } 496 497 outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); 498 499 status = piix4_transaction(adap); 500 if (status) 501 return status; 502 503 if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK)) 504 return 0; 505 506 507 switch (size) { 508 case PIIX4_BYTE: 509 case PIIX4_BYTE_DATA: 510 data->byte = inb_p(SMBHSTDAT0); 511 break; 512 case PIIX4_WORD_DATA: 513 data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); 514 break; 515 case PIIX4_BLOCK_DATA: 516 data->block[0] = inb_p(SMBHSTDAT0); 517 if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX) 518 return -EPROTO; 519 i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ 520 for (i = 1; i <= data->block[0]; i++) 521 data->block[i] = inb_p(SMBBLKDAT); 522 break; 523 } 524 return 0; 525} 526 527static u32 piix4_func(struct i2c_adapter *adapter) 528{ 529 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 530 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 531 I2C_FUNC_SMBUS_BLOCK_DATA; 532} 533 534static const struct i2c_algorithm smbus_algorithm = { 535 .smbus_xfer = piix4_access, 536 .functionality = piix4_func, 537}; 538 539static const struct pci_device_id piix4_ids[] = { 540 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) }, 541 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) }, 542 { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) }, 543 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) }, 544 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, 545 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, 546 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, 547 { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) }, 548 { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) }, 549 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 550 PCI_DEVICE_ID_SERVERWORKS_OSB4) }, 551 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 552 PCI_DEVICE_ID_SERVERWORKS_CSB5) }, 553 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 554 PCI_DEVICE_ID_SERVERWORKS_CSB6) }, 555 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 556 PCI_DEVICE_ID_SERVERWORKS_HT1000SB) }, 557 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 558 PCI_DEVICE_ID_SERVERWORKS_HT1100LD) }, 559 { 0, } 560}; 561 562MODULE_DEVICE_TABLE (pci, piix4_ids); 563 564static struct i2c_adapter *piix4_main_adapter; 565static struct i2c_adapter *piix4_aux_adapter; 566 567static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, 568 struct i2c_adapter **padap) 569{ 570 struct i2c_adapter *adap; 571 struct i2c_piix4_adapdata *adapdata; 572 int retval; 573 574 adap = kzalloc(sizeof(*adap), GFP_KERNEL); 575 if (adap == NULL) { 576 release_region(smba, SMBIOSIZE); 577 return -ENOMEM; 578 } 579 580 adap->owner = THIS_MODULE; 581 adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; 582 adap->algo = &smbus_algorithm; 583 584 adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL); 585 if (adapdata == NULL) { 586 kfree(adap); 587 release_region(smba, SMBIOSIZE); 588 return -ENOMEM; 589 } 590 591 adapdata->smba = smba; 592 593 /* set up the sysfs linkage to our parent device */ 594 adap->dev.parent = &dev->dev; 595 596 snprintf(adap->name, sizeof(adap->name), 597 "SMBus PIIX4 adapter at %04x", smba); 598 599 i2c_set_adapdata(adap, adapdata); 600 601 retval = i2c_add_adapter(adap); 602 if (retval) { 603 dev_err(&dev->dev, "Couldn't register adapter!\n"); 604 kfree(adapdata); 605 kfree(adap); 606 release_region(smba, SMBIOSIZE); 607 return retval; 608 } 609 610 *padap = adap; 611 return 0; 612} 613 614static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) 615{ 616 int retval; 617 618 if ((dev->vendor == PCI_VENDOR_ID_ATI && 619 dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && 620 dev->revision >= 0x40) || 621 dev->vendor == PCI_VENDOR_ID_AMD) 622 /* base address location etc changed in SB800 */ 623 retval = piix4_setup_sb800(dev, id, 0); 624 else 625 retval = piix4_setup(dev, id); 626 627 /* If no main SMBus found, give up */ 628 if (retval < 0) 629 return retval; 630 631 /* Try to register main SMBus adapter, give up if we can't */ 632 retval = piix4_add_adapter(dev, retval, &piix4_main_adapter); 633 if (retval < 0) 634 return retval; 635 636 /* Check for auxiliary SMBus on some AMD chipsets */ 637 retval = -ENODEV; 638 639 if (dev->vendor == PCI_VENDOR_ID_ATI && 640 dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) { 641 if (dev->revision < 0x40) { 642 retval = piix4_setup_aux(dev, id, 0x58); 643 } else { 644 /* SB800 added aux bus too */ 645 retval = piix4_setup_sb800(dev, id, 1); 646 } 647 } 648 649 if (dev->vendor == PCI_VENDOR_ID_AMD && 650 dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) { 651 retval = piix4_setup_sb800(dev, id, 1); 652 } 653 654 if (retval > 0) { 655 /* Try to add the aux adapter if it exists, 656 * piix4_add_adapter will clean up if this fails */ 657 piix4_add_adapter(dev, retval, &piix4_aux_adapter); 658 } 659 660 return 0; 661} 662 663static void piix4_adap_remove(struct i2c_adapter *adap) 664{ 665 struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); 666 667 if (adapdata->smba) { 668 i2c_del_adapter(adap); 669 release_region(adapdata->smba, SMBIOSIZE); 670 kfree(adapdata); 671 kfree(adap); 672 } 673} 674 675static void piix4_remove(struct pci_dev *dev) 676{ 677 if (piix4_main_adapter) { 678 piix4_adap_remove(piix4_main_adapter); 679 piix4_main_adapter = NULL; 680 } 681 682 if (piix4_aux_adapter) { 683 piix4_adap_remove(piix4_aux_adapter); 684 piix4_aux_adapter = NULL; 685 } 686} 687 688static struct pci_driver piix4_driver = { 689 .name = "piix4_smbus", 690 .id_table = piix4_ids, 691 .probe = piix4_probe, 692 .remove = piix4_remove, 693}; 694 695module_pci_driver(piix4_driver); 696 697MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " 698 "Philip Edelbrock <phil@netroedge.com>"); 699MODULE_DESCRIPTION("PIIX4 SMBus driver"); 700MODULE_LICENSE("GPL"); 701