1/* 2 * TI DAVINCI I2C adapter driver. 3 * 4 * Copyright (C) 2006 Texas Instruments. 5 * Copyright (C) 2007 MontaVista Software Inc. 6 * 7 * Updated by Vinod & Sudhakar Feb 2005 8 * 9 * ---------------------------------------------------------------------------- 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2 of the License, or 14 * (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * ---------------------------------------------------------------------------- 21 * 22 */ 23#include <linux/kernel.h> 24#include <linux/module.h> 25#include <linux/delay.h> 26#include <linux/i2c.h> 27#include <linux/clk.h> 28#include <linux/errno.h> 29#include <linux/sched.h> 30#include <linux/err.h> 31#include <linux/interrupt.h> 32#include <linux/platform_device.h> 33#include <linux/io.h> 34#include <linux/slab.h> 35#include <linux/cpufreq.h> 36#include <linux/gpio.h> 37#include <linux/of_device.h> 38#include <linux/platform_data/i2c-davinci.h> 39 40/* ----- global defines ----------------------------------------------- */ 41 42#define DAVINCI_I2C_TIMEOUT (1*HZ) 43#define DAVINCI_I2C_MAX_TRIES 2 44#define DAVINCI_I2C_OWN_ADDRESS 0x08 45#define I2C_DAVINCI_INTR_ALL (DAVINCI_I2C_IMR_SCD | \ 46 DAVINCI_I2C_IMR_ARDY | \ 47 DAVINCI_I2C_IMR_NACK | \ 48 DAVINCI_I2C_IMR_AL) 49 50#define DAVINCI_I2C_OAR_REG 0x00 51#define DAVINCI_I2C_IMR_REG 0x04 52#define DAVINCI_I2C_STR_REG 0x08 53#define DAVINCI_I2C_CLKL_REG 0x0c 54#define DAVINCI_I2C_CLKH_REG 0x10 55#define DAVINCI_I2C_CNT_REG 0x14 56#define DAVINCI_I2C_DRR_REG 0x18 57#define DAVINCI_I2C_SAR_REG 0x1c 58#define DAVINCI_I2C_DXR_REG 0x20 59#define DAVINCI_I2C_MDR_REG 0x24 60#define DAVINCI_I2C_IVR_REG 0x28 61#define DAVINCI_I2C_EMDR_REG 0x2c 62#define DAVINCI_I2C_PSC_REG 0x30 63#define DAVINCI_I2C_FUNC_REG 0x48 64#define DAVINCI_I2C_DIR_REG 0x4c 65#define DAVINCI_I2C_DIN_REG 0x50 66#define DAVINCI_I2C_DOUT_REG 0x54 67#define DAVINCI_I2C_DSET_REG 0x58 68#define DAVINCI_I2C_DCLR_REG 0x5c 69 70#define DAVINCI_I2C_IVR_AAS 0x07 71#define DAVINCI_I2C_IVR_SCD 0x06 72#define DAVINCI_I2C_IVR_XRDY 0x05 73#define DAVINCI_I2C_IVR_RDR 0x04 74#define DAVINCI_I2C_IVR_ARDY 0x03 75#define DAVINCI_I2C_IVR_NACK 0x02 76#define DAVINCI_I2C_IVR_AL 0x01 77 78#define DAVINCI_I2C_STR_BB BIT(12) 79#define DAVINCI_I2C_STR_RSFULL BIT(11) 80#define DAVINCI_I2C_STR_SCD BIT(5) 81#define DAVINCI_I2C_STR_ARDY BIT(2) 82#define DAVINCI_I2C_STR_NACK BIT(1) 83#define DAVINCI_I2C_STR_AL BIT(0) 84 85#define DAVINCI_I2C_MDR_NACK BIT(15) 86#define DAVINCI_I2C_MDR_STT BIT(13) 87#define DAVINCI_I2C_MDR_STP BIT(11) 88#define DAVINCI_I2C_MDR_MST BIT(10) 89#define DAVINCI_I2C_MDR_TRX BIT(9) 90#define DAVINCI_I2C_MDR_XA BIT(8) 91#define DAVINCI_I2C_MDR_RM BIT(7) 92#define DAVINCI_I2C_MDR_IRS BIT(5) 93 94#define DAVINCI_I2C_IMR_AAS BIT(6) 95#define DAVINCI_I2C_IMR_SCD BIT(5) 96#define DAVINCI_I2C_IMR_XRDY BIT(4) 97#define DAVINCI_I2C_IMR_RRDY BIT(3) 98#define DAVINCI_I2C_IMR_ARDY BIT(2) 99#define DAVINCI_I2C_IMR_NACK BIT(1) 100#define DAVINCI_I2C_IMR_AL BIT(0) 101 102/* set SDA and SCL as GPIO */ 103#define DAVINCI_I2C_FUNC_PFUNC0 BIT(0) 104 105/* set SCL as output when used as GPIO*/ 106#define DAVINCI_I2C_DIR_PDIR0 BIT(0) 107/* set SDA as output when used as GPIO*/ 108#define DAVINCI_I2C_DIR_PDIR1 BIT(1) 109 110/* read SCL GPIO level */ 111#define DAVINCI_I2C_DIN_PDIN0 BIT(0) 112/* read SDA GPIO level */ 113#define DAVINCI_I2C_DIN_PDIN1 BIT(1) 114 115/*set the SCL GPIO high */ 116#define DAVINCI_I2C_DSET_PDSET0 BIT(0) 117/*set the SDA GPIO high */ 118#define DAVINCI_I2C_DSET_PDSET1 BIT(1) 119 120/* set the SCL GPIO low */ 121#define DAVINCI_I2C_DCLR_PDCLR0 BIT(0) 122/* set the SDA GPIO low */ 123#define DAVINCI_I2C_DCLR_PDCLR1 BIT(1) 124 125struct davinci_i2c_dev { 126 struct device *dev; 127 void __iomem *base; 128 struct completion cmd_complete; 129 struct clk *clk; 130 int cmd_err; 131 u8 *buf; 132 size_t buf_len; 133 int irq; 134 int stop; 135 u8 terminate; 136 struct i2c_adapter adapter; 137#ifdef CONFIG_CPU_FREQ 138 struct completion xfr_complete; 139 struct notifier_block freq_transition; 140#endif 141 struct davinci_i2c_platform_data *pdata; 142}; 143 144/* default platform data to use if not supplied in the platform_device */ 145static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = { 146 .bus_freq = 100, 147 .bus_delay = 0, 148}; 149 150static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev, 151 int reg, u16 val) 152{ 153 writew_relaxed(val, i2c_dev->base + reg); 154} 155 156static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg) 157{ 158 return readw_relaxed(i2c_dev->base + reg); 159} 160 161static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev, 162 int val) 163{ 164 u16 w; 165 166 w = davinci_i2c_read_reg(i2c_dev, DAVINCI_I2C_MDR_REG); 167 if (!val) /* put I2C into reset */ 168 w &= ~DAVINCI_I2C_MDR_IRS; 169 else /* take I2C out of reset */ 170 w |= DAVINCI_I2C_MDR_IRS; 171 172 davinci_i2c_write_reg(i2c_dev, DAVINCI_I2C_MDR_REG, w); 173} 174 175static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) 176{ 177 struct davinci_i2c_platform_data *pdata = dev->pdata; 178 u16 psc; 179 u32 clk; 180 u32 d; 181 u32 clkh; 182 u32 clkl; 183 u32 input_clock = clk_get_rate(dev->clk); 184 struct device_node *of_node = dev->dev->of_node; 185 186 /* NOTE: I2C Clock divider programming info 187 * As per I2C specs the following formulas provide prescaler 188 * and low/high divider values 189 * input clk --> PSC Div -----------> ICCL/H Div --> output clock 190 * module clk 191 * 192 * output clk = module clk / (PSC + 1) [ (ICCL + d) + (ICCH + d) ] 193 * 194 * Thus, 195 * (ICCL + ICCH) = clk = (input clk / ((psc +1) * output clk)) - 2d; 196 * 197 * where if PSC == 0, d = 7, 198 * if PSC == 1, d = 6 199 * if PSC > 1 , d = 5 200 * 201 * Note: 202 * d is always 6 on Keystone I2C controller 203 */ 204 205 /* 206 * Both Davinci and current Keystone User Guides recommend a value 207 * between 7MHz and 12MHz. In reality 7MHz module clock doesn't 208 * always produce enough margin between SDA and SCL transitions. 209 * Measurements show that the higher the module clock is, the 210 * bigger is the margin, providing more reliable communication. 211 * So we better target for 12MHz. 212 */ 213 psc = (input_clock / 12000000) - 1; 214 if ((input_clock / (psc + 1)) > 12000000) 215 psc++; /* better to run under spec than over */ 216 d = (psc >= 2) ? 5 : 7 - psc; 217 218 if (of_node && of_device_is_compatible(of_node, "ti,keystone-i2c")) 219 d = 6; 220 221 clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)); 222 /* Avoid driving the bus too fast because of rounding errors above */ 223 if (input_clock / (psc + 1) / clk > pdata->bus_freq * 1000) 224 clk++; 225 /* 226 * According to I2C-BUS Spec 2.1, in FAST-MODE LOW period should be at 227 * least 1.3uS, which is not the case with 50% duty cycle. Driving HIGH 228 * to LOW ratio as 1 to 2 is more safe. 229 */ 230 if (pdata->bus_freq > 100) 231 clkl = (clk << 1) / 3; 232 else 233 clkl = (clk >> 1); 234 /* 235 * It's not always possible to have 1 to 2 ratio when d=7, so fall back 236 * to minimal possible clkh in this case. 237 */ 238 if (clk >= clkl + d) { 239 clkh = clk - clkl - d; 240 clkl -= d; 241 } else { 242 clkh = 0; 243 clkl = clk - (d << 1); 244 } 245 246 davinci_i2c_write_reg(dev, DAVINCI_I2C_PSC_REG, psc); 247 davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh); 248 davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl); 249 250 dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk); 251} 252 253/* 254 * This function configures I2C and brings I2C out of reset. 255 * This function is called during I2C init function. This function 256 * also gets called if I2C encounters any errors. 257 */ 258static int i2c_davinci_init(struct davinci_i2c_dev *dev) 259{ 260 struct davinci_i2c_platform_data *pdata = dev->pdata; 261 262 /* put I2C into reset */ 263 davinci_i2c_reset_ctrl(dev, 0); 264 265 /* compute clock dividers */ 266 i2c_davinci_calc_clk_dividers(dev); 267 268 /* Respond at reserved "SMBus Host" slave address" (and zero); 269 * we seem to have no option to not respond... 270 */ 271 davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, DAVINCI_I2C_OWN_ADDRESS); 272 273 dev_dbg(dev->dev, "PSC = %d\n", 274 davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG)); 275 dev_dbg(dev->dev, "CLKL = %d\n", 276 davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG)); 277 dev_dbg(dev->dev, "CLKH = %d\n", 278 davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG)); 279 dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n", 280 pdata->bus_freq, pdata->bus_delay); 281 282 283 /* Take the I2C module out of reset: */ 284 davinci_i2c_reset_ctrl(dev, 1); 285 286 /* Enable interrupts */ 287 davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, I2C_DAVINCI_INTR_ALL); 288 289 return 0; 290} 291 292/* 293 * This routine does i2c bus recovery by using i2c_generic_gpio_recovery 294 * which is provided by I2C Bus recovery infrastructure. 295 */ 296static void davinci_i2c_prepare_recovery(struct i2c_adapter *adap) 297{ 298 struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); 299 300 /* Disable interrupts */ 301 davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, 0); 302 303 /* put I2C into reset */ 304 davinci_i2c_reset_ctrl(dev, 0); 305} 306 307static void davinci_i2c_unprepare_recovery(struct i2c_adapter *adap) 308{ 309 struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); 310 311 i2c_davinci_init(dev); 312} 313 314static struct i2c_bus_recovery_info davinci_i2c_gpio_recovery_info = { 315 .recover_bus = i2c_generic_gpio_recovery, 316 .prepare_recovery = davinci_i2c_prepare_recovery, 317 .unprepare_recovery = davinci_i2c_unprepare_recovery, 318}; 319 320static void davinci_i2c_set_scl(struct i2c_adapter *adap, int val) 321{ 322 struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); 323 324 if (val) 325 davinci_i2c_write_reg(dev, DAVINCI_I2C_DSET_REG, 326 DAVINCI_I2C_DSET_PDSET0); 327 else 328 davinci_i2c_write_reg(dev, DAVINCI_I2C_DCLR_REG, 329 DAVINCI_I2C_DCLR_PDCLR0); 330} 331 332static int davinci_i2c_get_scl(struct i2c_adapter *adap) 333{ 334 struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); 335 int val; 336 337 /* read the state of SCL */ 338 val = davinci_i2c_read_reg(dev, DAVINCI_I2C_DIN_REG); 339 return val & DAVINCI_I2C_DIN_PDIN0; 340} 341 342static int davinci_i2c_get_sda(struct i2c_adapter *adap) 343{ 344 struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); 345 int val; 346 347 /* read the state of SDA */ 348 val = davinci_i2c_read_reg(dev, DAVINCI_I2C_DIN_REG); 349 return val & DAVINCI_I2C_DIN_PDIN1; 350} 351 352static void davinci_i2c_scl_prepare_recovery(struct i2c_adapter *adap) 353{ 354 struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); 355 356 davinci_i2c_prepare_recovery(adap); 357 358 /* SCL output, SDA input */ 359 davinci_i2c_write_reg(dev, DAVINCI_I2C_DIR_REG, DAVINCI_I2C_DIR_PDIR0); 360 361 /* change to GPIO mode */ 362 davinci_i2c_write_reg(dev, DAVINCI_I2C_FUNC_REG, 363 DAVINCI_I2C_FUNC_PFUNC0); 364} 365 366static void davinci_i2c_scl_unprepare_recovery(struct i2c_adapter *adap) 367{ 368 struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); 369 370 /* change back to I2C mode */ 371 davinci_i2c_write_reg(dev, DAVINCI_I2C_FUNC_REG, 0); 372 373 davinci_i2c_unprepare_recovery(adap); 374} 375 376static struct i2c_bus_recovery_info davinci_i2c_scl_recovery_info = { 377 .recover_bus = i2c_generic_scl_recovery, 378 .set_scl = davinci_i2c_set_scl, 379 .get_scl = davinci_i2c_get_scl, 380 .get_sda = davinci_i2c_get_sda, 381 .prepare_recovery = davinci_i2c_scl_prepare_recovery, 382 .unprepare_recovery = davinci_i2c_scl_unprepare_recovery, 383}; 384 385/* 386 * Waiting for bus not busy 387 */ 388static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev) 389{ 390 unsigned long timeout = jiffies + dev->adapter.timeout; 391 392 do { 393 if (!(davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) & DAVINCI_I2C_STR_BB)) 394 return 0; 395 schedule_timeout_uninterruptible(1); 396 } while (time_before_eq(jiffies, timeout)); 397 398 dev_warn(dev->dev, "timeout waiting for bus ready\n"); 399 i2c_recover_bus(&dev->adapter); 400 401 /* 402 * if bus is still "busy" here, it's most probably a HW problem like 403 * short-circuit 404 */ 405 if (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) & DAVINCI_I2C_STR_BB) 406 return -EIO; 407 408 return 0; 409} 410 411/* 412 * Low level master read/write transaction. This function is called 413 * from i2c_davinci_xfer. 414 */ 415static int 416i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) 417{ 418 struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); 419 struct davinci_i2c_platform_data *pdata = dev->pdata; 420 u32 flag; 421 u16 w; 422 unsigned long time_left; 423 424 if (msg->addr == DAVINCI_I2C_OWN_ADDRESS) { 425 dev_warn(dev->dev, "transfer to own address aborted\n"); 426 return -EADDRNOTAVAIL; 427 } 428 429 /* Introduce a delay, required for some boards (e.g Davinci EVM) */ 430 if (pdata->bus_delay) 431 udelay(pdata->bus_delay); 432 433 /* set the slave address */ 434 davinci_i2c_write_reg(dev, DAVINCI_I2C_SAR_REG, msg->addr); 435 436 dev->buf = msg->buf; 437 dev->buf_len = msg->len; 438 dev->stop = stop; 439 440 davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len); 441 442 reinit_completion(&dev->cmd_complete); 443 dev->cmd_err = 0; 444 445 /* Take I2C out of reset and configure it as master */ 446 flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST; 447 448 /* if the slave address is ten bit address, enable XA bit */ 449 if (msg->flags & I2C_M_TEN) 450 flag |= DAVINCI_I2C_MDR_XA; 451 if (!(msg->flags & I2C_M_RD)) 452 flag |= DAVINCI_I2C_MDR_TRX; 453 if (msg->len == 0) 454 flag |= DAVINCI_I2C_MDR_RM; 455 456 /* Enable receive or transmit interrupts */ 457 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG); 458 if (msg->flags & I2C_M_RD) 459 w |= DAVINCI_I2C_IMR_RRDY; 460 else 461 w |= DAVINCI_I2C_IMR_XRDY; 462 davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w); 463 464 dev->terminate = 0; 465 466 /* 467 * Write mode register first as needed for correct behaviour 468 * on OMAP-L138, but don't set STT yet to avoid a race with XRDY 469 * occurring before we have loaded DXR 470 */ 471 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); 472 473 /* 474 * First byte should be set here, not after interrupt, 475 * because transmit-data-ready interrupt can come before 476 * NACK-interrupt during sending of previous message and 477 * ICDXR may have wrong data 478 * It also saves us one interrupt, slightly faster 479 */ 480 if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) { 481 davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++); 482 dev->buf_len--; 483 } 484 485 /* Set STT to begin transmit now DXR is loaded */ 486 flag |= DAVINCI_I2C_MDR_STT; 487 if (stop && msg->len != 0) 488 flag |= DAVINCI_I2C_MDR_STP; 489 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); 490 491 time_left = wait_for_completion_timeout(&dev->cmd_complete, 492 dev->adapter.timeout); 493 if (!time_left) { 494 dev_err(dev->dev, "controller timed out\n"); 495 i2c_recover_bus(adap); 496 dev->buf_len = 0; 497 return -ETIMEDOUT; 498 } 499 if (dev->buf_len) { 500 /* This should be 0 if all bytes were transferred 501 * or dev->cmd_err denotes an error. 502 */ 503 dev_err(dev->dev, "abnormal termination buf_len=%i\n", 504 dev->buf_len); 505 dev->terminate = 1; 506 wmb(); 507 dev->buf_len = 0; 508 return -EREMOTEIO; 509 } 510 511 /* no error */ 512 if (likely(!dev->cmd_err)) 513 return msg->len; 514 515 /* We have an error */ 516 if (dev->cmd_err & DAVINCI_I2C_STR_AL) { 517 i2c_davinci_init(dev); 518 return -EIO; 519 } 520 521 if (dev->cmd_err & DAVINCI_I2C_STR_NACK) { 522 if (msg->flags & I2C_M_IGNORE_NAK) 523 return msg->len; 524 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); 525 w |= DAVINCI_I2C_MDR_STP; 526 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w); 527 return -EREMOTEIO; 528 } 529 return -EIO; 530} 531 532/* 533 * Prepare controller for a transaction and call i2c_davinci_xfer_msg 534 */ 535static int 536i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) 537{ 538 struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); 539 int i; 540 int ret; 541 542 dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num); 543 544 ret = i2c_davinci_wait_bus_not_busy(dev); 545 if (ret < 0) { 546 dev_warn(dev->dev, "timeout waiting for bus ready\n"); 547 return ret; 548 } 549 550 for (i = 0; i < num; i++) { 551 ret = i2c_davinci_xfer_msg(adap, &msgs[i], (i == (num - 1))); 552 dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num, 553 ret); 554 if (ret < 0) 555 return ret; 556 } 557 558#ifdef CONFIG_CPU_FREQ 559 complete(&dev->xfr_complete); 560#endif 561 562 return num; 563} 564 565static u32 i2c_davinci_func(struct i2c_adapter *adap) 566{ 567 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; 568} 569 570static void terminate_read(struct davinci_i2c_dev *dev) 571{ 572 u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); 573 w |= DAVINCI_I2C_MDR_NACK; 574 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w); 575 576 /* Throw away data */ 577 davinci_i2c_read_reg(dev, DAVINCI_I2C_DRR_REG); 578 if (!dev->terminate) 579 dev_err(dev->dev, "RDR IRQ while no data requested\n"); 580} 581static void terminate_write(struct davinci_i2c_dev *dev) 582{ 583 u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); 584 w |= DAVINCI_I2C_MDR_RM | DAVINCI_I2C_MDR_STP; 585 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w); 586 587 if (!dev->terminate) 588 dev_dbg(dev->dev, "TDR IRQ while no data to send\n"); 589} 590 591/* 592 * Interrupt service routine. This gets called whenever an I2C interrupt 593 * occurs. 594 */ 595static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) 596{ 597 struct davinci_i2c_dev *dev = dev_id; 598 u32 stat; 599 int count = 0; 600 u16 w; 601 602 while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) { 603 dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat); 604 if (count++ == 100) { 605 dev_warn(dev->dev, "Too much work in one IRQ\n"); 606 break; 607 } 608 609 switch (stat) { 610 case DAVINCI_I2C_IVR_AL: 611 /* Arbitration lost, must retry */ 612 dev->cmd_err |= DAVINCI_I2C_STR_AL; 613 dev->buf_len = 0; 614 complete(&dev->cmd_complete); 615 break; 616 617 case DAVINCI_I2C_IVR_NACK: 618 dev->cmd_err |= DAVINCI_I2C_STR_NACK; 619 dev->buf_len = 0; 620 complete(&dev->cmd_complete); 621 break; 622 623 case DAVINCI_I2C_IVR_ARDY: 624 davinci_i2c_write_reg(dev, 625 DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY); 626 if (((dev->buf_len == 0) && (dev->stop != 0)) || 627 (dev->cmd_err & DAVINCI_I2C_STR_NACK)) { 628 w = davinci_i2c_read_reg(dev, 629 DAVINCI_I2C_MDR_REG); 630 w |= DAVINCI_I2C_MDR_STP; 631 davinci_i2c_write_reg(dev, 632 DAVINCI_I2C_MDR_REG, w); 633 } 634 complete(&dev->cmd_complete); 635 break; 636 637 case DAVINCI_I2C_IVR_RDR: 638 if (dev->buf_len) { 639 *dev->buf++ = 640 davinci_i2c_read_reg(dev, 641 DAVINCI_I2C_DRR_REG); 642 dev->buf_len--; 643 if (dev->buf_len) 644 continue; 645 646 davinci_i2c_write_reg(dev, 647 DAVINCI_I2C_STR_REG, 648 DAVINCI_I2C_IMR_RRDY); 649 } else { 650 /* signal can terminate transfer */ 651 terminate_read(dev); 652 } 653 break; 654 655 case DAVINCI_I2C_IVR_XRDY: 656 if (dev->buf_len) { 657 davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, 658 *dev->buf++); 659 dev->buf_len--; 660 if (dev->buf_len) 661 continue; 662 663 w = davinci_i2c_read_reg(dev, 664 DAVINCI_I2C_IMR_REG); 665 w &= ~DAVINCI_I2C_IMR_XRDY; 666 davinci_i2c_write_reg(dev, 667 DAVINCI_I2C_IMR_REG, 668 w); 669 } else { 670 /* signal can terminate transfer */ 671 terminate_write(dev); 672 } 673 break; 674 675 case DAVINCI_I2C_IVR_SCD: 676 davinci_i2c_write_reg(dev, 677 DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_SCD); 678 complete(&dev->cmd_complete); 679 break; 680 681 case DAVINCI_I2C_IVR_AAS: 682 dev_dbg(dev->dev, "Address as slave interrupt\n"); 683 break; 684 685 default: 686 dev_warn(dev->dev, "Unrecognized irq stat %d\n", stat); 687 break; 688 } 689 } 690 691 return count ? IRQ_HANDLED : IRQ_NONE; 692} 693 694#ifdef CONFIG_CPU_FREQ 695static int i2c_davinci_cpufreq_transition(struct notifier_block *nb, 696 unsigned long val, void *data) 697{ 698 struct davinci_i2c_dev *dev; 699 700 dev = container_of(nb, struct davinci_i2c_dev, freq_transition); 701 if (val == CPUFREQ_PRECHANGE) { 702 wait_for_completion(&dev->xfr_complete); 703 davinci_i2c_reset_ctrl(dev, 0); 704 } else if (val == CPUFREQ_POSTCHANGE) { 705 i2c_davinci_calc_clk_dividers(dev); 706 davinci_i2c_reset_ctrl(dev, 1); 707 } 708 709 return 0; 710} 711 712static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev) 713{ 714 dev->freq_transition.notifier_call = i2c_davinci_cpufreq_transition; 715 716 return cpufreq_register_notifier(&dev->freq_transition, 717 CPUFREQ_TRANSITION_NOTIFIER); 718} 719 720static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev) 721{ 722 cpufreq_unregister_notifier(&dev->freq_transition, 723 CPUFREQ_TRANSITION_NOTIFIER); 724} 725#else 726static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev) 727{ 728 return 0; 729} 730 731static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev) 732{ 733} 734#endif 735 736static struct i2c_algorithm i2c_davinci_algo = { 737 .master_xfer = i2c_davinci_xfer, 738 .functionality = i2c_davinci_func, 739}; 740 741static const struct of_device_id davinci_i2c_of_match[] = { 742 {.compatible = "ti,davinci-i2c", }, 743 {.compatible = "ti,keystone-i2c", }, 744 {}, 745}; 746MODULE_DEVICE_TABLE(of, davinci_i2c_of_match); 747 748static int davinci_i2c_probe(struct platform_device *pdev) 749{ 750 struct davinci_i2c_dev *dev; 751 struct i2c_adapter *adap; 752 struct resource *mem; 753 int r, irq; 754 755 irq = platform_get_irq(pdev, 0); 756 if (irq <= 0) { 757 if (!irq) 758 irq = -ENXIO; 759 if (irq != -EPROBE_DEFER) 760 dev_err(&pdev->dev, 761 "can't get irq resource ret=%d\n", irq); 762 return irq; 763 } 764 765 dev = devm_kzalloc(&pdev->dev, sizeof(struct davinci_i2c_dev), 766 GFP_KERNEL); 767 if (!dev) { 768 dev_err(&pdev->dev, "Memory allocation failed\n"); 769 return -ENOMEM; 770 } 771 772 init_completion(&dev->cmd_complete); 773#ifdef CONFIG_CPU_FREQ 774 init_completion(&dev->xfr_complete); 775#endif 776 dev->dev = &pdev->dev; 777 dev->irq = irq; 778 dev->pdata = dev_get_platdata(&pdev->dev); 779 platform_set_drvdata(pdev, dev); 780 781 if (!dev->pdata && pdev->dev.of_node) { 782 u32 prop; 783 784 dev->pdata = devm_kzalloc(&pdev->dev, 785 sizeof(struct davinci_i2c_platform_data), GFP_KERNEL); 786 if (!dev->pdata) 787 return -ENOMEM; 788 789 memcpy(dev->pdata, &davinci_i2c_platform_data_default, 790 sizeof(struct davinci_i2c_platform_data)); 791 if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency", 792 &prop)) 793 dev->pdata->bus_freq = prop / 1000; 794 795 dev->pdata->has_pfunc = 796 of_property_read_bool(pdev->dev.of_node, 797 "ti,has-pfunc"); 798 } else if (!dev->pdata) { 799 dev->pdata = &davinci_i2c_platform_data_default; 800 } 801 802 dev->clk = devm_clk_get(&pdev->dev, NULL); 803 if (IS_ERR(dev->clk)) 804 return -ENODEV; 805 clk_prepare_enable(dev->clk); 806 807 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 808 dev->base = devm_ioremap_resource(&pdev->dev, mem); 809 if (IS_ERR(dev->base)) { 810 r = PTR_ERR(dev->base); 811 goto err_unuse_clocks; 812 } 813 814 i2c_davinci_init(dev); 815 816 r = devm_request_irq(&pdev->dev, dev->irq, i2c_davinci_isr, 0, 817 pdev->name, dev); 818 if (r) { 819 dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); 820 goto err_unuse_clocks; 821 } 822 823 r = i2c_davinci_cpufreq_register(dev); 824 if (r) { 825 dev_err(&pdev->dev, "failed to register cpufreq\n"); 826 goto err_unuse_clocks; 827 } 828 829 adap = &dev->adapter; 830 i2c_set_adapdata(adap, dev); 831 adap->owner = THIS_MODULE; 832 adap->class = I2C_CLASS_DEPRECATED; 833 strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name)); 834 adap->algo = &i2c_davinci_algo; 835 adap->dev.parent = &pdev->dev; 836 adap->timeout = DAVINCI_I2C_TIMEOUT; 837 adap->dev.of_node = pdev->dev.of_node; 838 839 if (dev->pdata->has_pfunc) 840 adap->bus_recovery_info = &davinci_i2c_scl_recovery_info; 841 else if (dev->pdata->scl_pin) { 842 adap->bus_recovery_info = &davinci_i2c_gpio_recovery_info; 843 adap->bus_recovery_info->scl_gpio = dev->pdata->scl_pin; 844 adap->bus_recovery_info->sda_gpio = dev->pdata->sda_pin; 845 } 846 847 adap->nr = pdev->id; 848 r = i2c_add_numbered_adapter(adap); 849 if (r) { 850 dev_err(&pdev->dev, "failure adding adapter\n"); 851 goto err_unuse_clocks; 852 } 853 854 return 0; 855 856err_unuse_clocks: 857 clk_disable_unprepare(dev->clk); 858 dev->clk = NULL; 859 return r; 860} 861 862static int davinci_i2c_remove(struct platform_device *pdev) 863{ 864 struct davinci_i2c_dev *dev = platform_get_drvdata(pdev); 865 866 i2c_davinci_cpufreq_deregister(dev); 867 868 i2c_del_adapter(&dev->adapter); 869 870 clk_disable_unprepare(dev->clk); 871 dev->clk = NULL; 872 873 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0); 874 875 return 0; 876} 877 878#ifdef CONFIG_PM 879static int davinci_i2c_suspend(struct device *dev) 880{ 881 struct platform_device *pdev = to_platform_device(dev); 882 struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev); 883 884 /* put I2C into reset */ 885 davinci_i2c_reset_ctrl(i2c_dev, 0); 886 clk_disable_unprepare(i2c_dev->clk); 887 888 return 0; 889} 890 891static int davinci_i2c_resume(struct device *dev) 892{ 893 struct platform_device *pdev = to_platform_device(dev); 894 struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev); 895 896 clk_prepare_enable(i2c_dev->clk); 897 /* take I2C out of reset */ 898 davinci_i2c_reset_ctrl(i2c_dev, 1); 899 900 return 0; 901} 902 903static const struct dev_pm_ops davinci_i2c_pm = { 904 .suspend = davinci_i2c_suspend, 905 .resume = davinci_i2c_resume, 906}; 907 908#define davinci_i2c_pm_ops (&davinci_i2c_pm) 909#else 910#define davinci_i2c_pm_ops NULL 911#endif 912 913/* work with hotplug and coldplug */ 914MODULE_ALIAS("platform:i2c_davinci"); 915 916static struct platform_driver davinci_i2c_driver = { 917 .probe = davinci_i2c_probe, 918 .remove = davinci_i2c_remove, 919 .driver = { 920 .name = "i2c_davinci", 921 .pm = davinci_i2c_pm_ops, 922 .of_match_table = davinci_i2c_of_match, 923 }, 924}; 925 926/* I2C may be needed to bring up other drivers */ 927static int __init davinci_i2c_init_driver(void) 928{ 929 return platform_driver_register(&davinci_i2c_driver); 930} 931subsys_initcall(davinci_i2c_init_driver); 932 933static void __exit davinci_i2c_exit_driver(void) 934{ 935 platform_driver_unregister(&davinci_i2c_driver); 936} 937module_exit(davinci_i2c_exit_driver); 938 939MODULE_AUTHOR("Texas Instruments India"); 940MODULE_DESCRIPTION("TI DaVinci I2C bus adapter"); 941MODULE_LICENSE("GPL"); 942