1#
2# Drm device configuration
3#
4# This driver provides support for the
5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
6#
7menuconfig DRM
8	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
9	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
10	select HDMI
11	select FB_CMDLINE
12	select I2C
13	select I2C_ALGOBIT
14	select DMA_SHARED_BUFFER
15	help
16	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
17	  introduced in XFree86 4.0. If you say Y here, you need to select
18	  the module that's right for your graphics card from the list below.
19	  These modules provide support for synchronization, security, and
20	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
21	  details.  You should also select and configure AGP
22	  (/dev/agpgart) support if it is available for your platform.
23
24config DRM_MIPI_DSI
25	bool
26	depends on DRM
27
28config DRM_KMS_HELPER
29	tristate
30	depends on DRM
31	help
32	  CRTC helpers for KMS drivers.
33
34config DRM_KMS_FB_HELPER
35	bool
36	depends on DRM_KMS_HELPER
37	select FB
38	select FRAMEBUFFER_CONSOLE if !EXPERT
39	select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
40	select FB_SYS_FOPS
41	select FB_SYS_FILLRECT
42	select FB_SYS_COPYAREA
43	select FB_SYS_IMAGEBLIT
44	select FB_CFB_FILLRECT
45	select FB_CFB_COPYAREA
46	select FB_CFB_IMAGEBLIT
47	help
48	  FBDEV helpers for KMS drivers.
49
50config DRM_FBDEV_EMULATION
51	bool "Enable legacy fbdev support for your modesetting driver"
52	depends on DRM
53	select DRM_KMS_HELPER
54	select DRM_KMS_FB_HELPER
55	default y
56	help
57	  Choose this option if you have a need for the legacy fbdev
58	  support. Note that this support also provides the linux console
59	  support on top of your modesetting driver.
60
61	  If in doubt, say "Y".
62
63config DRM_LOAD_EDID_FIRMWARE
64	bool "Allow to specify an EDID data set instead of probing for it"
65	depends on DRM_KMS_HELPER
66	help
67	  Say Y here, if you want to use EDID data to be loaded from the
68	  /lib/firmware directory or one of the provided built-in
69	  data sets. This may be necessary, if the graphics adapter or
70	  monitor are unable to provide appropriate EDID data. Since this
71	  feature is provided as a workaround for broken hardware, the
72	  default case is N. Details and instructions how to build your own
73	  EDID data are given in Documentation/EDID/HOWTO.txt.
74
75config DRM_TTM
76	tristate
77	depends on DRM
78	help
79	  GPU memory management subsystem for devices with multiple
80	  GPU memory types. Will be enabled automatically if a device driver
81	  uses it.
82
83config DRM_GEM_CMA_HELPER
84	bool
85	depends on DRM && HAVE_DMA_ATTRS
86	help
87	  Choose this if you need the GEM CMA helper functions
88
89config DRM_KMS_CMA_HELPER
90	bool
91	depends on DRM && HAVE_DMA_ATTRS
92	select DRM_GEM_CMA_HELPER
93	select DRM_KMS_FB_HELPER
94	select FB_SYS_FILLRECT
95	select FB_SYS_COPYAREA
96	select FB_SYS_IMAGEBLIT
97	help
98	  Choose this if you need the KMS CMA helper functions
99
100source "drivers/gpu/drm/i2c/Kconfig"
101
102config DRM_TDFX
103	tristate "3dfx Banshee/Voodoo3+"
104	depends on DRM && PCI
105	help
106	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
107	  graphics card.  If M is selected, the module will be called tdfx.
108
109config DRM_R128
110	tristate "ATI Rage 128"
111	depends on DRM && PCI
112	select FW_LOADER
113	help
114	  Choose this option if you have an ATI Rage 128 graphics card.  If M
115	  is selected, the module will be called r128.  AGP support for
116	  this card is strongly suggested (unless you have a PCI version).
117
118config DRM_RADEON
119	tristate "ATI Radeon"
120	depends on DRM && PCI
121	select FB_CFB_FILLRECT
122	select FB_CFB_COPYAREA
123	select FB_CFB_IMAGEBLIT
124	select FW_LOADER
125        select DRM_KMS_HELPER
126	select DRM_KMS_FB_HELPER
127        select DRM_TTM
128	select POWER_SUPPLY
129	select HWMON
130	select BACKLIGHT_CLASS_DEVICE
131	select BACKLIGHT_LCD_SUPPORT
132	select INTERVAL_TREE
133	help
134	  Choose this option if you have an ATI Radeon graphics card.  There
135	  are both PCI and AGP versions.  You don't need to choose this to
136	  run the Radeon in plain VGA mode.
137
138	  If M is selected, the module will be called radeon.
139
140source "drivers/gpu/drm/radeon/Kconfig"
141
142config DRM_AMDGPU
143	tristate "AMD GPU"
144	depends on DRM && PCI
145	select FB_CFB_FILLRECT
146	select FB_CFB_COPYAREA
147	select FB_CFB_IMAGEBLIT
148	select FW_LOADER
149        select DRM_KMS_HELPER
150	select DRM_KMS_FB_HELPER
151        select DRM_TTM
152	select POWER_SUPPLY
153	select HWMON
154	select BACKLIGHT_CLASS_DEVICE
155	select BACKLIGHT_LCD_SUPPORT
156	select INTERVAL_TREE
157	help
158	  Choose this option if you have a recent AMD Radeon graphics card.
159
160	  If M is selected, the module will be called amdgpu.
161
162source "drivers/gpu/drm/amd/amdgpu/Kconfig"
163
164source "drivers/gpu/drm/nouveau/Kconfig"
165
166config DRM_I810
167	tristate "Intel I810"
168	# !PREEMPT because of missing ioctl locking
169	depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
170	help
171	  Choose this option if you have an Intel I810 graphics card.  If M is
172	  selected, the module will be called i810.  AGP support is required
173	  for this driver to work.
174
175source "drivers/gpu/drm/i915/Kconfig"
176
177config DRM_MGA
178	tristate "Matrox g200/g400"
179	depends on DRM && PCI
180	select FW_LOADER
181	help
182	  Choose this option if you have a Matrox G200, G400 or G450 graphics
183	  card.  If M is selected, the module will be called mga.  AGP
184	  support is required for this driver to work.
185
186config DRM_SIS
187	tristate "SiS video cards"
188	depends on DRM && AGP
189	depends on FB_SIS || FB_SIS=n
190	help
191	  Choose this option if you have a SiS 630 or compatible video
192          chipset. If M is selected the module will be called sis. AGP
193          support is required for this driver to work.
194
195config DRM_VIA
196	tristate "Via unichrome video cards"
197	depends on DRM && PCI
198	help
199	  Choose this option if you have a Via unichrome or compatible video
200	  chipset. If M is selected the module will be called via.
201
202config DRM_SAVAGE
203	tristate "Savage video cards"
204	depends on DRM && PCI
205	help
206	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
207	  chipset. If M is selected the module will be called savage.
208
209config DRM_VGEM
210	tristate "Virtual GEM provider"
211	depends on DRM
212	help
213	  Choose this option to get a virtual graphics memory manager,
214	  as used by Mesa's software renderer for enhanced performance.
215	  If M is selected the module will be called vgem.
216
217
218source "drivers/gpu/drm/exynos/Kconfig"
219
220source "drivers/gpu/drm/rockchip/Kconfig"
221
222source "drivers/gpu/drm/vmwgfx/Kconfig"
223
224source "drivers/gpu/drm/gma500/Kconfig"
225
226source "drivers/gpu/drm/udl/Kconfig"
227
228source "drivers/gpu/drm/ast/Kconfig"
229
230source "drivers/gpu/drm/mgag200/Kconfig"
231
232source "drivers/gpu/drm/cirrus/Kconfig"
233
234source "drivers/gpu/drm/armada/Kconfig"
235
236source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
237
238source "drivers/gpu/drm/rcar-du/Kconfig"
239
240source "drivers/gpu/drm/shmobile/Kconfig"
241
242source "drivers/gpu/drm/omapdrm/Kconfig"
243
244source "drivers/gpu/drm/tilcdc/Kconfig"
245
246source "drivers/gpu/drm/qxl/Kconfig"
247
248source "drivers/gpu/drm/bochs/Kconfig"
249
250source "drivers/gpu/drm/virtio/Kconfig"
251
252source "drivers/gpu/drm/msm/Kconfig"
253
254source "drivers/gpu/drm/fsl-dcu/Kconfig"
255
256source "drivers/gpu/drm/tegra/Kconfig"
257
258source "drivers/gpu/drm/panel/Kconfig"
259
260source "drivers/gpu/drm/bridge/Kconfig"
261
262source "drivers/gpu/drm/sti/Kconfig"
263
264source "drivers/gpu/drm/amd/amdkfd/Kconfig"
265
266source "drivers/gpu/drm/imx/Kconfig"
267
268source "drivers/gpu/drm/vc4/Kconfig"
269