1/*
2 * linux/arch/arm/mach-sa1100/gpio.c
3 *
4 * Generic SA-1100 GPIO handling
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10#include <linux/gpio.h>
11#include <linux/init.h>
12#include <linux/module.h>
13#include <linux/io.h>
14#include <linux/syscore_ops.h>
15#include <mach/hardware.h>
16#include <mach/irqs.h>
17
18static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
19{
20	return GPLR & GPIO_GPIO(offset);
21}
22
23static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
24{
25	if (value)
26		GPSR = GPIO_GPIO(offset);
27	else
28		GPCR = GPIO_GPIO(offset);
29}
30
31static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset)
32{
33	unsigned long flags;
34
35	local_irq_save(flags);
36	GPDR &= ~GPIO_GPIO(offset);
37	local_irq_restore(flags);
38	return 0;
39}
40
41static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value)
42{
43	unsigned long flags;
44
45	local_irq_save(flags);
46	sa1100_gpio_set(chip, offset, value);
47	GPDR |= GPIO_GPIO(offset);
48	local_irq_restore(flags);
49	return 0;
50}
51
52static int sa1100_to_irq(struct gpio_chip *chip, unsigned offset)
53{
54	return IRQ_GPIO0 + offset;
55}
56
57static struct gpio_chip sa1100_gpio_chip = {
58	.label			= "gpio",
59	.direction_input	= sa1100_direction_input,
60	.direction_output	= sa1100_direction_output,
61	.set			= sa1100_gpio_set,
62	.get			= sa1100_gpio_get,
63	.to_irq			= sa1100_to_irq,
64	.base			= 0,
65	.ngpio			= GPIO_MAX + 1,
66};
67
68/*
69 * SA1100 GPIO edge detection for IRQs:
70 * IRQs are generated on Falling-Edge, Rising-Edge, or both.
71 * Use this instead of directly setting GRER/GFER.
72 */
73static int GPIO_IRQ_rising_edge;
74static int GPIO_IRQ_falling_edge;
75static int GPIO_IRQ_mask;
76
77static int sa1100_gpio_type(struct irq_data *d, unsigned int type)
78{
79	unsigned int mask;
80
81	mask = BIT(d->hwirq);
82
83	if (type == IRQ_TYPE_PROBE) {
84		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
85			return 0;
86		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
87	}
88
89	if (type & IRQ_TYPE_EDGE_RISING)
90		GPIO_IRQ_rising_edge |= mask;
91	else
92		GPIO_IRQ_rising_edge &= ~mask;
93	if (type & IRQ_TYPE_EDGE_FALLING)
94		GPIO_IRQ_falling_edge |= mask;
95	else
96		GPIO_IRQ_falling_edge &= ~mask;
97
98	GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
99	GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
100
101	return 0;
102}
103
104/*
105 * GPIO IRQs must be acknowledged.
106 */
107static void sa1100_gpio_ack(struct irq_data *d)
108{
109	GEDR = BIT(d->hwirq);
110}
111
112static void sa1100_gpio_mask(struct irq_data *d)
113{
114	unsigned int mask = BIT(d->hwirq);
115
116	GPIO_IRQ_mask &= ~mask;
117
118	GRER &= ~mask;
119	GFER &= ~mask;
120}
121
122static void sa1100_gpio_unmask(struct irq_data *d)
123{
124	unsigned int mask = BIT(d->hwirq);
125
126	GPIO_IRQ_mask |= mask;
127
128	GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
129	GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
130}
131
132static int sa1100_gpio_wake(struct irq_data *d, unsigned int on)
133{
134	if (on)
135		PWER |= BIT(d->hwirq);
136	else
137		PWER &= ~BIT(d->hwirq);
138	return 0;
139}
140
141/*
142 * This is for GPIO IRQs
143 */
144static struct irq_chip sa1100_gpio_irq_chip = {
145	.name		= "GPIO",
146	.irq_ack	= sa1100_gpio_ack,
147	.irq_mask	= sa1100_gpio_mask,
148	.irq_unmask	= sa1100_gpio_unmask,
149	.irq_set_type	= sa1100_gpio_type,
150	.irq_set_wake	= sa1100_gpio_wake,
151};
152
153static int sa1100_gpio_irqdomain_map(struct irq_domain *d,
154		unsigned int irq, irq_hw_number_t hwirq)
155{
156	irq_set_chip_and_handler(irq, &sa1100_gpio_irq_chip,
157				 handle_edge_irq);
158	irq_set_noprobe(irq);
159
160	return 0;
161}
162
163static const struct irq_domain_ops sa1100_gpio_irqdomain_ops = {
164	.map = sa1100_gpio_irqdomain_map,
165	.xlate = irq_domain_xlate_onetwocell,
166};
167
168static struct irq_domain *sa1100_gpio_irqdomain;
169
170/*
171 * IRQ 0-11 (GPIO) handler.  We enter here with the
172 * irq_controller_lock held, and IRQs disabled.  Decode the IRQ
173 * and call the handler.
174 */
175static void sa1100_gpio_handler(struct irq_desc *desc)
176{
177	unsigned int irq, mask;
178
179	mask = GEDR;
180	do {
181		/*
182		 * clear down all currently active IRQ sources.
183		 * We will be processing them all.
184		 */
185		GEDR = mask;
186
187		irq = IRQ_GPIO0;
188		do {
189			if (mask & 1)
190				generic_handle_irq(irq);
191			mask >>= 1;
192			irq++;
193		} while (mask);
194
195		mask = GEDR;
196	} while (mask);
197}
198
199static int sa1100_gpio_suspend(void)
200{
201	/*
202	 * Set the appropriate edges for wakeup.
203	 */
204	GRER = PWER & GPIO_IRQ_rising_edge;
205	GFER = PWER & GPIO_IRQ_falling_edge;
206
207	/*
208	 * Clear any pending GPIO interrupts.
209	 */
210	GEDR = GEDR;
211
212	return 0;
213}
214
215static void sa1100_gpio_resume(void)
216{
217	GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
218	GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
219}
220
221static struct syscore_ops sa1100_gpio_syscore_ops = {
222	.suspend	= sa1100_gpio_suspend,
223	.resume		= sa1100_gpio_resume,
224};
225
226static int __init sa1100_gpio_init_devicefs(void)
227{
228	register_syscore_ops(&sa1100_gpio_syscore_ops);
229	return 0;
230}
231
232device_initcall(sa1100_gpio_init_devicefs);
233
234void __init sa1100_init_gpio(void)
235{
236	/* clear all GPIO edge detects */
237	GFER = 0;
238	GRER = 0;
239	GEDR = -1;
240
241	gpiochip_add(&sa1100_gpio_chip);
242
243	sa1100_gpio_irqdomain = irq_domain_add_simple(NULL,
244			28, IRQ_GPIO0,
245			&sa1100_gpio_irqdomain_ops, NULL);
246
247	/*
248	 * Install handlers for GPIO 0-10 edge detect interrupts
249	 */
250	irq_set_chained_handler(IRQ_GPIO0_SC, sa1100_gpio_handler);
251	irq_set_chained_handler(IRQ_GPIO1_SC, sa1100_gpio_handler);
252	irq_set_chained_handler(IRQ_GPIO2_SC, sa1100_gpio_handler);
253	irq_set_chained_handler(IRQ_GPIO3_SC, sa1100_gpio_handler);
254	irq_set_chained_handler(IRQ_GPIO4_SC, sa1100_gpio_handler);
255	irq_set_chained_handler(IRQ_GPIO5_SC, sa1100_gpio_handler);
256	irq_set_chained_handler(IRQ_GPIO6_SC, sa1100_gpio_handler);
257	irq_set_chained_handler(IRQ_GPIO7_SC, sa1100_gpio_handler);
258	irq_set_chained_handler(IRQ_GPIO8_SC, sa1100_gpio_handler);
259	irq_set_chained_handler(IRQ_GPIO9_SC, sa1100_gpio_handler);
260	irq_set_chained_handler(IRQ_GPIO10_SC, sa1100_gpio_handler);
261	/*
262	 * Install handler for GPIO 11-27 edge detect interrupts
263	 */
264	irq_set_chained_handler(IRQ_GPIO11_27, sa1100_gpio_handler);
265
266}
267