1/* 2 * Copyright (C) 2013 Freescale Semiconductor, Inc. 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8 9#include <linux/clk.h> 10#include <linux/cpu.h> 11#include <linux/cpufreq.h> 12#include <linux/err.h> 13#include <linux/module.h> 14#include <linux/of.h> 15#include <linux/pm_opp.h> 16#include <linux/platform_device.h> 17#include <linux/regulator/consumer.h> 18 19#define PU_SOC_VOLTAGE_NORMAL 1250000 20#define PU_SOC_VOLTAGE_HIGH 1275000 21#define FREQ_1P2_GHZ 1200000000 22 23static struct regulator *arm_reg; 24static struct regulator *pu_reg; 25static struct regulator *soc_reg; 26 27static struct clk *arm_clk; 28static struct clk *pll1_sys_clk; 29static struct clk *pll1_sw_clk; 30static struct clk *step_clk; 31static struct clk *pll2_pfd2_396m_clk; 32 33/* clk used by i.MX6UL */ 34static struct clk *pll2_bus_clk; 35static struct clk *secondary_sel_clk; 36 37static struct device *cpu_dev; 38static bool free_opp; 39static struct cpufreq_frequency_table *freq_table; 40static unsigned int transition_latency; 41 42static u32 *imx6_soc_volt; 43static u32 soc_opp_count; 44 45static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) 46{ 47 struct dev_pm_opp *opp; 48 unsigned long freq_hz, volt, volt_old; 49 unsigned int old_freq, new_freq; 50 int ret; 51 52 new_freq = freq_table[index].frequency; 53 freq_hz = new_freq * 1000; 54 old_freq = clk_get_rate(arm_clk) / 1000; 55 56 rcu_read_lock(); 57 opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); 58 if (IS_ERR(opp)) { 59 rcu_read_unlock(); 60 dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz); 61 return PTR_ERR(opp); 62 } 63 64 volt = dev_pm_opp_get_voltage(opp); 65 rcu_read_unlock(); 66 volt_old = regulator_get_voltage(arm_reg); 67 68 dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n", 69 old_freq / 1000, volt_old / 1000, 70 new_freq / 1000, volt / 1000); 71 72 /* scaling up? scale voltage before frequency */ 73 if (new_freq > old_freq) { 74 if (!IS_ERR(pu_reg)) { 75 ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0); 76 if (ret) { 77 dev_err(cpu_dev, "failed to scale vddpu up: %d\n", ret); 78 return ret; 79 } 80 } 81 ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0); 82 if (ret) { 83 dev_err(cpu_dev, "failed to scale vddsoc up: %d\n", ret); 84 return ret; 85 } 86 ret = regulator_set_voltage_tol(arm_reg, volt, 0); 87 if (ret) { 88 dev_err(cpu_dev, 89 "failed to scale vddarm up: %d\n", ret); 90 return ret; 91 } 92 } 93 94 /* 95 * The setpoints are selected per PLL/PDF frequencies, so we need to 96 * reprogram PLL for frequency scaling. The procedure of reprogramming 97 * PLL1 is as below. 98 * For i.MX6UL, it has a secondary clk mux, the cpu frequency change 99 * flow is slightly different from other i.MX6 OSC. 100 * The cpu frequeny change flow for i.MX6(except i.MX6UL) is as below: 101 * - Enable pll2_pfd2_396m_clk and reparent pll1_sw_clk to it 102 * - Reprogram pll1_sys_clk and reparent pll1_sw_clk back to it 103 * - Disable pll2_pfd2_396m_clk 104 */ 105 if (of_machine_is_compatible("fsl,imx6ul")) { 106 /* 107 * When changing pll1_sw_clk's parent to pll1_sys_clk, 108 * CPU may run at higher than 528MHz, this will lead to 109 * the system unstable if the voltage is lower than the 110 * voltage of 528MHz, so lower the CPU frequency to one 111 * half before changing CPU frequency. 112 */ 113 clk_set_rate(arm_clk, (old_freq >> 1) * 1000); 114 clk_set_parent(pll1_sw_clk, pll1_sys_clk); 115 if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) 116 clk_set_parent(secondary_sel_clk, pll2_bus_clk); 117 else 118 clk_set_parent(secondary_sel_clk, pll2_pfd2_396m_clk); 119 clk_set_parent(step_clk, secondary_sel_clk); 120 clk_set_parent(pll1_sw_clk, step_clk); 121 } else { 122 clk_set_parent(step_clk, pll2_pfd2_396m_clk); 123 clk_set_parent(pll1_sw_clk, step_clk); 124 if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) { 125 clk_set_rate(pll1_sys_clk, new_freq * 1000); 126 clk_set_parent(pll1_sw_clk, pll1_sys_clk); 127 } 128 } 129 130 /* Ensure the arm clock divider is what we expect */ 131 ret = clk_set_rate(arm_clk, new_freq * 1000); 132 if (ret) { 133 dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); 134 regulator_set_voltage_tol(arm_reg, volt_old, 0); 135 return ret; 136 } 137 138 /* scaling down? scale voltage after frequency */ 139 if (new_freq < old_freq) { 140 ret = regulator_set_voltage_tol(arm_reg, volt, 0); 141 if (ret) { 142 dev_warn(cpu_dev, 143 "failed to scale vddarm down: %d\n", ret); 144 ret = 0; 145 } 146 ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0); 147 if (ret) { 148 dev_warn(cpu_dev, "failed to scale vddsoc down: %d\n", ret); 149 ret = 0; 150 } 151 if (!IS_ERR(pu_reg)) { 152 ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0); 153 if (ret) { 154 dev_warn(cpu_dev, "failed to scale vddpu down: %d\n", ret); 155 ret = 0; 156 } 157 } 158 } 159 160 return 0; 161} 162 163static int imx6q_cpufreq_init(struct cpufreq_policy *policy) 164{ 165 policy->clk = arm_clk; 166 return cpufreq_generic_init(policy, freq_table, transition_latency); 167} 168 169static struct cpufreq_driver imx6q_cpufreq_driver = { 170 .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, 171 .verify = cpufreq_generic_frequency_table_verify, 172 .target_index = imx6q_set_target, 173 .get = cpufreq_generic_get, 174 .init = imx6q_cpufreq_init, 175 .name = "imx6q-cpufreq", 176 .attr = cpufreq_generic_attr, 177}; 178 179static int imx6q_cpufreq_probe(struct platform_device *pdev) 180{ 181 struct device_node *np; 182 struct dev_pm_opp *opp; 183 unsigned long min_volt, max_volt; 184 int num, ret; 185 const struct property *prop; 186 const __be32 *val; 187 u32 nr, i, j; 188 189 cpu_dev = get_cpu_device(0); 190 if (!cpu_dev) { 191 pr_err("failed to get cpu0 device\n"); 192 return -ENODEV; 193 } 194 195 np = of_node_get(cpu_dev->of_node); 196 if (!np) { 197 dev_err(cpu_dev, "failed to find cpu0 node\n"); 198 return -ENOENT; 199 } 200 201 arm_clk = clk_get(cpu_dev, "arm"); 202 pll1_sys_clk = clk_get(cpu_dev, "pll1_sys"); 203 pll1_sw_clk = clk_get(cpu_dev, "pll1_sw"); 204 step_clk = clk_get(cpu_dev, "step"); 205 pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m"); 206 if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) || 207 IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) { 208 dev_err(cpu_dev, "failed to get clocks\n"); 209 ret = -ENOENT; 210 goto put_clk; 211 } 212 213 if (of_machine_is_compatible("fsl,imx6ul")) { 214 pll2_bus_clk = clk_get(cpu_dev, "pll2_bus"); 215 secondary_sel_clk = clk_get(cpu_dev, "secondary_sel"); 216 if (IS_ERR(pll2_bus_clk) || IS_ERR(secondary_sel_clk)) { 217 dev_err(cpu_dev, "failed to get clocks specific to imx6ul\n"); 218 ret = -ENOENT; 219 goto put_clk; 220 } 221 } 222 223 arm_reg = regulator_get(cpu_dev, "arm"); 224 pu_reg = regulator_get_optional(cpu_dev, "pu"); 225 soc_reg = regulator_get(cpu_dev, "soc"); 226 if (IS_ERR(arm_reg) || IS_ERR(soc_reg)) { 227 dev_err(cpu_dev, "failed to get regulators\n"); 228 ret = -ENOENT; 229 goto put_reg; 230 } 231 232 /* 233 * We expect an OPP table supplied by platform. 234 * Just, incase the platform did not supply the OPP 235 * table, it will try to get it. 236 */ 237 num = dev_pm_opp_get_opp_count(cpu_dev); 238 if (num < 0) { 239 ret = dev_pm_opp_of_add_table(cpu_dev); 240 if (ret < 0) { 241 dev_err(cpu_dev, "failed to init OPP table: %d\n", ret); 242 goto put_reg; 243 } 244 245 /* Because we have added the OPPs here, we must free them */ 246 free_opp = true; 247 248 num = dev_pm_opp_get_opp_count(cpu_dev); 249 if (num < 0) { 250 ret = num; 251 dev_err(cpu_dev, "no OPP table is found: %d\n", ret); 252 goto out_free_opp; 253 } 254 } 255 256 ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); 257 if (ret) { 258 dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); 259 goto put_reg; 260 } 261 262 /* Make imx6_soc_volt array's size same as arm opp number */ 263 imx6_soc_volt = devm_kzalloc(cpu_dev, sizeof(*imx6_soc_volt) * num, GFP_KERNEL); 264 if (imx6_soc_volt == NULL) { 265 ret = -ENOMEM; 266 goto free_freq_table; 267 } 268 269 prop = of_find_property(np, "fsl,soc-operating-points", NULL); 270 if (!prop || !prop->value) 271 goto soc_opp_out; 272 273 /* 274 * Each OPP is a set of tuples consisting of frequency and 275 * voltage like <freq-kHz vol-uV>. 276 */ 277 nr = prop->length / sizeof(u32); 278 if (nr % 2 || (nr / 2) < num) 279 goto soc_opp_out; 280 281 for (j = 0; j < num; j++) { 282 val = prop->value; 283 for (i = 0; i < nr / 2; i++) { 284 unsigned long freq = be32_to_cpup(val++); 285 unsigned long volt = be32_to_cpup(val++); 286 if (freq_table[j].frequency == freq) { 287 imx6_soc_volt[soc_opp_count++] = volt; 288 break; 289 } 290 } 291 } 292 293soc_opp_out: 294 /* use fixed soc opp volt if no valid soc opp info found in dtb */ 295 if (soc_opp_count != num) { 296 dev_warn(cpu_dev, "can NOT find valid fsl,soc-operating-points property in dtb, use default value!\n"); 297 for (j = 0; j < num; j++) 298 imx6_soc_volt[j] = PU_SOC_VOLTAGE_NORMAL; 299 if (freq_table[num - 1].frequency * 1000 == FREQ_1P2_GHZ) 300 imx6_soc_volt[num - 1] = PU_SOC_VOLTAGE_HIGH; 301 } 302 303 if (of_property_read_u32(np, "clock-latency", &transition_latency)) 304 transition_latency = CPUFREQ_ETERNAL; 305 306 /* 307 * Calculate the ramp time for max voltage change in the 308 * VDDSOC and VDDPU regulators. 309 */ 310 ret = regulator_set_voltage_time(soc_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]); 311 if (ret > 0) 312 transition_latency += ret * 1000; 313 if (!IS_ERR(pu_reg)) { 314 ret = regulator_set_voltage_time(pu_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]); 315 if (ret > 0) 316 transition_latency += ret * 1000; 317 } 318 319 /* 320 * OPP is maintained in order of increasing frequency, and 321 * freq_table initialised from OPP is therefore sorted in the 322 * same order. 323 */ 324 rcu_read_lock(); 325 opp = dev_pm_opp_find_freq_exact(cpu_dev, 326 freq_table[0].frequency * 1000, true); 327 min_volt = dev_pm_opp_get_voltage(opp); 328 opp = dev_pm_opp_find_freq_exact(cpu_dev, 329 freq_table[--num].frequency * 1000, true); 330 max_volt = dev_pm_opp_get_voltage(opp); 331 rcu_read_unlock(); 332 ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt); 333 if (ret > 0) 334 transition_latency += ret * 1000; 335 336 ret = cpufreq_register_driver(&imx6q_cpufreq_driver); 337 if (ret) { 338 dev_err(cpu_dev, "failed register driver: %d\n", ret); 339 goto free_freq_table; 340 } 341 342 of_node_put(np); 343 return 0; 344 345free_freq_table: 346 dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); 347out_free_opp: 348 if (free_opp) 349 dev_pm_opp_of_remove_table(cpu_dev); 350put_reg: 351 if (!IS_ERR(arm_reg)) 352 regulator_put(arm_reg); 353 if (!IS_ERR(pu_reg)) 354 regulator_put(pu_reg); 355 if (!IS_ERR(soc_reg)) 356 regulator_put(soc_reg); 357put_clk: 358 if (!IS_ERR(arm_clk)) 359 clk_put(arm_clk); 360 if (!IS_ERR(pll1_sys_clk)) 361 clk_put(pll1_sys_clk); 362 if (!IS_ERR(pll1_sw_clk)) 363 clk_put(pll1_sw_clk); 364 if (!IS_ERR(step_clk)) 365 clk_put(step_clk); 366 if (!IS_ERR(pll2_pfd2_396m_clk)) 367 clk_put(pll2_pfd2_396m_clk); 368 if (!IS_ERR(pll2_bus_clk)) 369 clk_put(pll2_bus_clk); 370 if (!IS_ERR(secondary_sel_clk)) 371 clk_put(secondary_sel_clk); 372 of_node_put(np); 373 return ret; 374} 375 376static int imx6q_cpufreq_remove(struct platform_device *pdev) 377{ 378 cpufreq_unregister_driver(&imx6q_cpufreq_driver); 379 dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); 380 if (free_opp) 381 dev_pm_opp_of_remove_table(cpu_dev); 382 regulator_put(arm_reg); 383 if (!IS_ERR(pu_reg)) 384 regulator_put(pu_reg); 385 regulator_put(soc_reg); 386 clk_put(arm_clk); 387 clk_put(pll1_sys_clk); 388 clk_put(pll1_sw_clk); 389 clk_put(step_clk); 390 clk_put(pll2_pfd2_396m_clk); 391 clk_put(pll2_bus_clk); 392 clk_put(secondary_sel_clk); 393 394 return 0; 395} 396 397static struct platform_driver imx6q_cpufreq_platdrv = { 398 .driver = { 399 .name = "imx6q-cpufreq", 400 }, 401 .probe = imx6q_cpufreq_probe, 402 .remove = imx6q_cpufreq_remove, 403}; 404module_platform_driver(imx6q_cpufreq_platdrv); 405 406MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); 407MODULE_DESCRIPTION("Freescale i.MX6Q cpufreq driver"); 408MODULE_LICENSE("GPL"); 409