1/*
2 * Copyright (C) ST-Ericsson SA 2011
3 *
4 * License Terms: GNU General Public License v2
5 * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
6 * Author: Sundar Iyer for ST-Ericsson
7 * sched_clock implementation is based on:
8 * plat-nomadik/timer.c Linus Walleij <linus.walleij@stericsson.com>
9 *
10 * DBx500-PRCMU Timer
11 * The PRCMU has 5 timers which are available in a always-on
12 * power domain.  We use the Timer 4 for our always-on clock
13 * source on DB8500.
14 */
15#include <linux/clockchips.h>
16#include <linux/clksrc-dbx500-prcmu.h>
17#include <linux/sched_clock.h>
18
19#define RATE_32K		32768
20
21#define TIMER_MODE_CONTINOUS	0x1
22#define TIMER_DOWNCOUNT_VAL	0xffffffff
23
24#define PRCMU_TIMER_REF		0
25#define PRCMU_TIMER_DOWNCOUNT	0x4
26#define PRCMU_TIMER_MODE	0x8
27
28#define SCHED_CLOCK_MIN_WRAP 131072 /* 2^32 / 32768 */
29
30static void __iomem *clksrc_dbx500_timer_base;
31
32static cycle_t notrace clksrc_dbx500_prcmu_read(struct clocksource *cs)
33{
34	void __iomem *base = clksrc_dbx500_timer_base;
35	u32 count, count2;
36
37	do {
38		count = readl_relaxed(base + PRCMU_TIMER_DOWNCOUNT);
39		count2 = readl_relaxed(base + PRCMU_TIMER_DOWNCOUNT);
40	} while (count2 != count);
41
42	/* Negate because the timer is a decrementing counter */
43	return ~count;
44}
45
46static struct clocksource clocksource_dbx500_prcmu = {
47	.name		= "dbx500-prcmu-timer",
48	.rating		= 300,
49	.read		= clksrc_dbx500_prcmu_read,
50	.mask		= CLOCKSOURCE_MASK(32),
51	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
52};
53
54#ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
55
56static u64 notrace dbx500_prcmu_sched_clock_read(void)
57{
58	if (unlikely(!clksrc_dbx500_timer_base))
59		return 0;
60
61	return clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu);
62}
63
64#endif
65
66void __init clksrc_dbx500_prcmu_init(void __iomem *base)
67{
68	clksrc_dbx500_timer_base = base;
69
70	/*
71	 * The A9 sub system expects the timer to be configured as
72	 * a continous looping timer.
73	 * The PRCMU should configure it but if it for some reason
74	 * don't we do it here.
75	 */
76	if (readl(clksrc_dbx500_timer_base + PRCMU_TIMER_MODE) !=
77	    TIMER_MODE_CONTINOUS) {
78		writel(TIMER_MODE_CONTINOUS,
79		       clksrc_dbx500_timer_base + PRCMU_TIMER_MODE);
80		writel(TIMER_DOWNCOUNT_VAL,
81		       clksrc_dbx500_timer_base + PRCMU_TIMER_REF);
82	}
83#ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
84	sched_clock_register(dbx500_prcmu_sched_clock_read, 32, RATE_32K);
85#endif
86	clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K);
87}
88