1#include <linux/kernel.h> 2#include <linux/module.h> 3#include <linux/init.h> 4#include <linux/blkdev.h> 5#include <linux/gfp.h> 6#include <scsi/scsi_host.h> 7#include <linux/ata.h> 8#include <linux/libata.h> 9 10#include <asm/dma.h> 11#include <asm/ecard.h> 12 13#define DRV_NAME "pata_icside" 14 15#define ICS_IDENT_OFFSET 0x2280 16 17#define ICS_ARCIN_V5_INTRSTAT 0x0000 18#define ICS_ARCIN_V5_INTROFFSET 0x0004 19 20#define ICS_ARCIN_V6_INTROFFSET_1 0x2200 21#define ICS_ARCIN_V6_INTRSTAT_1 0x2290 22#define ICS_ARCIN_V6_INTROFFSET_2 0x3200 23#define ICS_ARCIN_V6_INTRSTAT_2 0x3290 24 25struct portinfo { 26 unsigned int dataoffset; 27 unsigned int ctrloffset; 28 unsigned int stepping; 29}; 30 31static const struct portinfo pata_icside_portinfo_v5 = { 32 .dataoffset = 0x2800, 33 .ctrloffset = 0x2b80, 34 .stepping = 6, 35}; 36 37static const struct portinfo pata_icside_portinfo_v6_1 = { 38 .dataoffset = 0x2000, 39 .ctrloffset = 0x2380, 40 .stepping = 6, 41}; 42 43static const struct portinfo pata_icside_portinfo_v6_2 = { 44 .dataoffset = 0x3000, 45 .ctrloffset = 0x3380, 46 .stepping = 6, 47}; 48 49struct pata_icside_state { 50 void __iomem *irq_port; 51 void __iomem *ioc_base; 52 unsigned int type; 53 unsigned int dma; 54 struct { 55 u8 port_sel; 56 u8 disabled; 57 unsigned int speed[ATA_MAX_DEVICES]; 58 } port[2]; 59}; 60 61struct pata_icside_info { 62 struct pata_icside_state *state; 63 struct expansion_card *ec; 64 void __iomem *base; 65 void __iomem *irqaddr; 66 unsigned int irqmask; 67 const expansioncard_ops_t *irqops; 68 unsigned int mwdma_mask; 69 unsigned int nr_ports; 70 const struct portinfo *port[2]; 71 unsigned long raw_base; 72 unsigned long raw_ioc_base; 73}; 74 75#define ICS_TYPE_A3IN 0 76#define ICS_TYPE_A3USER 1 77#define ICS_TYPE_V6 3 78#define ICS_TYPE_V5 15 79#define ICS_TYPE_NOTYPE ((unsigned int)-1) 80 81/* ---------------- Version 5 PCB Support Functions --------------------- */ 82/* Prototype: pata_icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) 83 * Purpose : enable interrupts from card 84 */ 85static void pata_icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) 86{ 87 struct pata_icside_state *state = ec->irq_data; 88 89 writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET); 90} 91 92/* Prototype: pata_icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) 93 * Purpose : disable interrupts from card 94 */ 95static void pata_icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) 96{ 97 struct pata_icside_state *state = ec->irq_data; 98 99 readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET); 100} 101 102static const expansioncard_ops_t pata_icside_ops_arcin_v5 = { 103 .irqenable = pata_icside_irqenable_arcin_v5, 104 .irqdisable = pata_icside_irqdisable_arcin_v5, 105}; 106 107 108/* ---------------- Version 6 PCB Support Functions --------------------- */ 109/* Prototype: pata_icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) 110 * Purpose : enable interrupts from card 111 */ 112static void pata_icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) 113{ 114 struct pata_icside_state *state = ec->irq_data; 115 void __iomem *base = state->irq_port; 116 117 if (!state->port[0].disabled) 118 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); 119 if (!state->port[1].disabled) 120 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); 121} 122 123/* Prototype: pata_icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) 124 * Purpose : disable interrupts from card 125 */ 126static void pata_icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) 127{ 128 struct pata_icside_state *state = ec->irq_data; 129 130 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); 131 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); 132} 133 134/* Prototype: pata_icside_irqprobe(struct expansion_card *ec) 135 * Purpose : detect an active interrupt from card 136 */ 137static int pata_icside_irqpending_arcin_v6(struct expansion_card *ec) 138{ 139 struct pata_icside_state *state = ec->irq_data; 140 141 return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 || 142 readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1; 143} 144 145static const expansioncard_ops_t pata_icside_ops_arcin_v6 = { 146 .irqenable = pata_icside_irqenable_arcin_v6, 147 .irqdisable = pata_icside_irqdisable_arcin_v6, 148 .irqpending = pata_icside_irqpending_arcin_v6, 149}; 150 151 152/* 153 * SG-DMA support. 154 * 155 * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers. 156 * There is only one DMA controller per card, which means that only 157 * one drive can be accessed at one time. NOTE! We do not enforce that 158 * here, but we rely on the main IDE driver spotting that both 159 * interfaces use the same IRQ, which should guarantee this. 160 */ 161 162/* 163 * Configure the IOMD to give the appropriate timings for the transfer 164 * mode being requested. We take the advice of the ATA standards, and 165 * calculate the cycle time based on the transfer mode, and the EIDE 166 * MW DMA specs that the drive provides in the IDENTIFY command. 167 * 168 * We have the following IOMD DMA modes to choose from: 169 * 170 * Type Active Recovery Cycle 171 * A 250 (250) 312 (550) 562 (800) 172 * B 187 (200) 250 (550) 437 (750) 173 * C 125 (125) 125 (375) 250 (500) 174 * D 62 (50) 125 (375) 187 (425) 175 * 176 * (figures in brackets are actual measured timings on DIOR/DIOW) 177 * 178 * However, we also need to take care of the read/write active and 179 * recovery timings: 180 * 181 * Read Write 182 * Mode Active -- Recovery -- Cycle IOMD type 183 * MW0 215 50 215 480 A 184 * MW1 80 50 50 150 C 185 * MW2 70 25 25 120 C 186 */ 187static void pata_icside_set_dmamode(struct ata_port *ap, struct ata_device *adev) 188{ 189 struct pata_icside_state *state = ap->host->private_data; 190 struct ata_timing t; 191 unsigned int cycle; 192 char iomd_type; 193 194 /* 195 * DMA is based on a 16MHz clock 196 */ 197 if (ata_timing_compute(adev, adev->dma_mode, &t, 1000, 1)) 198 return; 199 200 /* 201 * Choose the IOMD cycle timing which ensure that the interface 202 * satisfies the measured active, recovery and cycle times. 203 */ 204 if (t.active <= 50 && t.recover <= 375 && t.cycle <= 425) 205 iomd_type = 'D', cycle = 187; 206 else if (t.active <= 125 && t.recover <= 375 && t.cycle <= 500) 207 iomd_type = 'C', cycle = 250; 208 else if (t.active <= 200 && t.recover <= 550 && t.cycle <= 750) 209 iomd_type = 'B', cycle = 437; 210 else 211 iomd_type = 'A', cycle = 562; 212 213 ata_dev_info(adev, "timings: act %dns rec %dns cyc %dns (%c)\n", 214 t.active, t.recover, t.cycle, iomd_type); 215 216 state->port[ap->port_no].speed[adev->devno] = cycle; 217} 218 219static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) 220{ 221 struct ata_port *ap = qc->ap; 222 struct pata_icside_state *state = ap->host->private_data; 223 unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE; 224 225 /* 226 * We are simplex; BUG if we try to fiddle with DMA 227 * while it's active. 228 */ 229 BUG_ON(dma_channel_active(state->dma)); 230 231 /* 232 * Route the DMA signals to the correct interface 233 */ 234 writeb(state->port[ap->port_no].port_sel, state->ioc_base); 235 236 set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]); 237 set_dma_sg(state->dma, qc->sg, qc->n_elem); 238 set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ); 239 240 /* issue r/w command */ 241 ap->ops->sff_exec_command(ap, &qc->tf); 242} 243 244static void pata_icside_bmdma_start(struct ata_queued_cmd *qc) 245{ 246 struct ata_port *ap = qc->ap; 247 struct pata_icside_state *state = ap->host->private_data; 248 249 BUG_ON(dma_channel_active(state->dma)); 250 enable_dma(state->dma); 251} 252 253static void pata_icside_bmdma_stop(struct ata_queued_cmd *qc) 254{ 255 struct ata_port *ap = qc->ap; 256 struct pata_icside_state *state = ap->host->private_data; 257 258 disable_dma(state->dma); 259 260 /* see ata_bmdma_stop */ 261 ata_sff_dma_pause(ap); 262} 263 264static u8 pata_icside_bmdma_status(struct ata_port *ap) 265{ 266 struct pata_icside_state *state = ap->host->private_data; 267 void __iomem *irq_port; 268 269 irq_port = state->irq_port + (ap->port_no ? ICS_ARCIN_V6_INTRSTAT_2 : 270 ICS_ARCIN_V6_INTRSTAT_1); 271 272 return readb(irq_port) & 1 ? ATA_DMA_INTR : 0; 273} 274 275static int icside_dma_init(struct pata_icside_info *info) 276{ 277 struct pata_icside_state *state = info->state; 278 struct expansion_card *ec = info->ec; 279 int i; 280 281 for (i = 0; i < ATA_MAX_DEVICES; i++) { 282 state->port[0].speed[i] = 480; 283 state->port[1].speed[i] = 480; 284 } 285 286 if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { 287 state->dma = ec->dma; 288 info->mwdma_mask = ATA_MWDMA2; 289 } 290 291 return 0; 292} 293 294 295static struct scsi_host_template pata_icside_sht = { 296 ATA_BASE_SHT(DRV_NAME), 297 .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, 298 .dma_boundary = IOMD_DMA_BOUNDARY, 299}; 300 301static void pata_icside_postreset(struct ata_link *link, unsigned int *classes) 302{ 303 struct ata_port *ap = link->ap; 304 struct pata_icside_state *state = ap->host->private_data; 305 306 if (classes[0] != ATA_DEV_NONE || classes[1] != ATA_DEV_NONE) 307 return ata_sff_postreset(link, classes); 308 309 state->port[ap->port_no].disabled = 1; 310 311 if (state->type == ICS_TYPE_V6) { 312 /* 313 * Disable interrupts from this port, otherwise we 314 * receive spurious interrupts from the floating 315 * interrupt line. 316 */ 317 void __iomem *irq_port = state->irq_port + 318 (ap->port_no ? ICS_ARCIN_V6_INTROFFSET_2 : ICS_ARCIN_V6_INTROFFSET_1); 319 readb(irq_port); 320 } 321} 322 323static struct ata_port_operations pata_icside_port_ops = { 324 .inherits = &ata_bmdma_port_ops, 325 /* no need to build any PRD tables for DMA */ 326 .qc_prep = ata_noop_qc_prep, 327 .sff_data_xfer = ata_sff_data_xfer_noirq, 328 .bmdma_setup = pata_icside_bmdma_setup, 329 .bmdma_start = pata_icside_bmdma_start, 330 .bmdma_stop = pata_icside_bmdma_stop, 331 .bmdma_status = pata_icside_bmdma_status, 332 333 .cable_detect = ata_cable_40wire, 334 .set_dmamode = pata_icside_set_dmamode, 335 .postreset = pata_icside_postreset, 336 337 .port_start = ATA_OP_NULL, /* don't need PRD table */ 338}; 339 340static void pata_icside_setup_ioaddr(struct ata_port *ap, void __iomem *base, 341 struct pata_icside_info *info, 342 const struct portinfo *port) 343{ 344 struct ata_ioports *ioaddr = &ap->ioaddr; 345 void __iomem *cmd = base + port->dataoffset; 346 347 ioaddr->cmd_addr = cmd; 348 ioaddr->data_addr = cmd + (ATA_REG_DATA << port->stepping); 349 ioaddr->error_addr = cmd + (ATA_REG_ERR << port->stepping); 350 ioaddr->feature_addr = cmd + (ATA_REG_FEATURE << port->stepping); 351 ioaddr->nsect_addr = cmd + (ATA_REG_NSECT << port->stepping); 352 ioaddr->lbal_addr = cmd + (ATA_REG_LBAL << port->stepping); 353 ioaddr->lbam_addr = cmd + (ATA_REG_LBAM << port->stepping); 354 ioaddr->lbah_addr = cmd + (ATA_REG_LBAH << port->stepping); 355 ioaddr->device_addr = cmd + (ATA_REG_DEVICE << port->stepping); 356 ioaddr->status_addr = cmd + (ATA_REG_STATUS << port->stepping); 357 ioaddr->command_addr = cmd + (ATA_REG_CMD << port->stepping); 358 359 ioaddr->ctl_addr = base + port->ctrloffset; 360 ioaddr->altstatus_addr = ioaddr->ctl_addr; 361 362 ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", 363 info->raw_base + port->dataoffset, 364 info->raw_base + port->ctrloffset); 365 366 if (info->raw_ioc_base) 367 ata_port_desc(ap, "iocbase 0x%lx", info->raw_ioc_base); 368} 369 370static int pata_icside_register_v5(struct pata_icside_info *info) 371{ 372 struct pata_icside_state *state = info->state; 373 void __iomem *base; 374 375 base = ecardm_iomap(info->ec, ECARD_RES_MEMC, 0, 0); 376 if (!base) 377 return -ENOMEM; 378 379 state->irq_port = base; 380 381 info->base = base; 382 info->irqaddr = base + ICS_ARCIN_V5_INTRSTAT; 383 info->irqmask = 1; 384 info->irqops = &pata_icside_ops_arcin_v5; 385 info->nr_ports = 1; 386 info->port[0] = &pata_icside_portinfo_v5; 387 388 info->raw_base = ecard_resource_start(info->ec, ECARD_RES_MEMC); 389 390 return 0; 391} 392 393static int pata_icside_register_v6(struct pata_icside_info *info) 394{ 395 struct pata_icside_state *state = info->state; 396 struct expansion_card *ec = info->ec; 397 void __iomem *ioc_base, *easi_base; 398 unsigned int sel = 0; 399 400 ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); 401 if (!ioc_base) 402 return -ENOMEM; 403 404 easi_base = ioc_base; 405 406 if (ecard_resource_flags(ec, ECARD_RES_EASI)) { 407 easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0); 408 if (!easi_base) 409 return -ENOMEM; 410 411 /* 412 * Enable access to the EASI region. 413 */ 414 sel = 1 << 5; 415 } 416 417 writeb(sel, ioc_base); 418 419 state->irq_port = easi_base; 420 state->ioc_base = ioc_base; 421 state->port[0].port_sel = sel; 422 state->port[1].port_sel = sel | 1; 423 424 info->base = easi_base; 425 info->irqops = &pata_icside_ops_arcin_v6; 426 info->nr_ports = 2; 427 info->port[0] = &pata_icside_portinfo_v6_1; 428 info->port[1] = &pata_icside_portinfo_v6_2; 429 430 info->raw_base = ecard_resource_start(ec, ECARD_RES_EASI); 431 info->raw_ioc_base = ecard_resource_start(ec, ECARD_RES_IOCFAST); 432 433 return icside_dma_init(info); 434} 435 436static int pata_icside_add_ports(struct pata_icside_info *info) 437{ 438 struct expansion_card *ec = info->ec; 439 struct ata_host *host; 440 int i; 441 442 if (info->irqaddr) { 443 ec->irqaddr = info->irqaddr; 444 ec->irqmask = info->irqmask; 445 } 446 if (info->irqops) 447 ecard_setirq(ec, info->irqops, info->state); 448 449 /* 450 * Be on the safe side - disable interrupts 451 */ 452 ec->ops->irqdisable(ec, ec->irq); 453 454 host = ata_host_alloc(&ec->dev, info->nr_ports); 455 if (!host) 456 return -ENOMEM; 457 458 host->private_data = info->state; 459 host->flags = ATA_HOST_SIMPLEX; 460 461 for (i = 0; i < info->nr_ports; i++) { 462 struct ata_port *ap = host->ports[i]; 463 464 ap->pio_mask = ATA_PIO4; 465 ap->mwdma_mask = info->mwdma_mask; 466 ap->flags |= ATA_FLAG_SLAVE_POSS; 467 ap->ops = &pata_icside_port_ops; 468 469 pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]); 470 } 471 472 return ata_host_activate(host, ec->irq, ata_bmdma_interrupt, 0, 473 &pata_icside_sht); 474} 475 476static int pata_icside_probe(struct expansion_card *ec, 477 const struct ecard_id *id) 478{ 479 struct pata_icside_state *state; 480 struct pata_icside_info info; 481 void __iomem *idmem; 482 int ret; 483 484 ret = ecard_request_resources(ec); 485 if (ret) 486 goto out; 487 488 state = devm_kzalloc(&ec->dev, sizeof(*state), GFP_KERNEL); 489 if (!state) { 490 ret = -ENOMEM; 491 goto release; 492 } 493 494 state->type = ICS_TYPE_NOTYPE; 495 state->dma = NO_DMA; 496 497 idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); 498 if (idmem) { 499 unsigned int type; 500 501 type = readb(idmem + ICS_IDENT_OFFSET) & 1; 502 type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1; 503 type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2; 504 type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3; 505 ecardm_iounmap(ec, idmem); 506 507 state->type = type; 508 } 509 510 memset(&info, 0, sizeof(info)); 511 info.state = state; 512 info.ec = ec; 513 514 switch (state->type) { 515 case ICS_TYPE_A3IN: 516 dev_warn(&ec->dev, "A3IN unsupported\n"); 517 ret = -ENODEV; 518 break; 519 520 case ICS_TYPE_A3USER: 521 dev_warn(&ec->dev, "A3USER unsupported\n"); 522 ret = -ENODEV; 523 break; 524 525 case ICS_TYPE_V5: 526 ret = pata_icside_register_v5(&info); 527 break; 528 529 case ICS_TYPE_V6: 530 ret = pata_icside_register_v6(&info); 531 break; 532 533 default: 534 dev_warn(&ec->dev, "unknown interface type\n"); 535 ret = -ENODEV; 536 break; 537 } 538 539 if (ret == 0) 540 ret = pata_icside_add_ports(&info); 541 542 if (ret == 0) 543 goto out; 544 545 release: 546 ecard_release_resources(ec); 547 out: 548 return ret; 549} 550 551static void pata_icside_shutdown(struct expansion_card *ec) 552{ 553 struct ata_host *host = ecard_get_drvdata(ec); 554 unsigned long flags; 555 556 /* 557 * Disable interrupts from this card. We need to do 558 * this before disabling EASI since we may be accessing 559 * this register via that region. 560 */ 561 local_irq_save(flags); 562 ec->ops->irqdisable(ec, ec->irq); 563 local_irq_restore(flags); 564 565 /* 566 * Reset the ROM pointer so that we can read the ROM 567 * after a soft reboot. This also disables access to 568 * the IDE taskfile via the EASI region. 569 */ 570 if (host) { 571 struct pata_icside_state *state = host->private_data; 572 if (state->ioc_base) 573 writeb(0, state->ioc_base); 574 } 575} 576 577static void pata_icside_remove(struct expansion_card *ec) 578{ 579 struct ata_host *host = ecard_get_drvdata(ec); 580 struct pata_icside_state *state = host->private_data; 581 582 ata_host_detach(host); 583 584 pata_icside_shutdown(ec); 585 586 /* 587 * don't NULL out the drvdata - devres/libata wants it 588 * to free the ata_host structure. 589 */ 590 if (state->dma != NO_DMA) 591 free_dma(state->dma); 592 593 ecard_release_resources(ec); 594} 595 596static const struct ecard_id pata_icside_ids[] = { 597 { MANU_ICS, PROD_ICS_IDE }, 598 { MANU_ICS2, PROD_ICS2_IDE }, 599 { 0xffff, 0xffff } 600}; 601 602static struct ecard_driver pata_icside_driver = { 603 .probe = pata_icside_probe, 604 .remove = pata_icside_remove, 605 .shutdown = pata_icside_shutdown, 606 .id_table = pata_icside_ids, 607 .drv = { 608 .name = DRV_NAME, 609 }, 610}; 611 612static int __init pata_icside_init(void) 613{ 614 return ecard_register_driver(&pata_icside_driver); 615} 616 617static void __exit pata_icside_exit(void) 618{ 619 ecard_remove_driver(&pata_icside_driver); 620} 621 622MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); 623MODULE_LICENSE("GPL"); 624MODULE_DESCRIPTION("ICS PATA driver"); 625 626module_init(pata_icside_init); 627module_exit(pata_icside_exit); 628