1/******************************************************************************
2 *
3 * Module Name: psobject - Support for parse objects
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2015, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 *    notice, this list of conditions, and the following disclaimer,
16 *    without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 *    substantially similar to the "NO WARRANTY" disclaimer below
19 *    ("Disclaimer") and any redistribution must be conditioned upon
20 *    including a substantially similar Disclaimer requirement for further
21 *    binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 *    of any contributors may be used to endorse or promote products derived
24 *    from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acparser.h"
47#include "amlcode.h"
48
49#define _COMPONENT          ACPI_PARSER
50ACPI_MODULE_NAME("psobject")
51
52/* Local prototypes */
53static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state);
54
55/*******************************************************************************
56 *
57 * FUNCTION:    acpi_ps_get_aml_opcode
58 *
59 * PARAMETERS:  walk_state          - Current state
60 *
61 * RETURN:      Status
62 *
63 * DESCRIPTION: Extract the next AML opcode from the input stream.
64 *
65 ******************************************************************************/
66
67static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
68{
69	u32 aml_offset;
70
71	ACPI_FUNCTION_TRACE_PTR(ps_get_aml_opcode, walk_state);
72
73	walk_state->aml = walk_state->parser_state.aml;
74	walk_state->opcode = acpi_ps_peek_opcode(&(walk_state->parser_state));
75
76	/*
77	 * First cut to determine what we have found:
78	 * 1) A valid AML opcode
79	 * 2) A name string
80	 * 3) An unknown/invalid opcode
81	 */
82	walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
83
84	switch (walk_state->op_info->class) {
85	case AML_CLASS_ASCII:
86	case AML_CLASS_PREFIX:
87		/*
88		 * Starts with a valid prefix or ASCII char, this is a name
89		 * string. Convert the bare name string to a namepath.
90		 */
91		walk_state->opcode = AML_INT_NAMEPATH_OP;
92		walk_state->arg_types = ARGP_NAMESTRING;
93		break;
94
95	case AML_CLASS_UNKNOWN:
96
97		/* The opcode is unrecognized. Complain and skip unknown opcodes */
98
99		if (walk_state->pass_number == 2) {
100			aml_offset = (u32)ACPI_PTR_DIFF(walk_state->aml,
101							walk_state->
102							parser_state.aml_start);
103
104			ACPI_ERROR((AE_INFO,
105				    "Unknown opcode 0x%.2X at table offset 0x%.4X, ignoring",
106				    walk_state->opcode,
107				    (u32)(aml_offset +
108					  sizeof(struct acpi_table_header))));
109
110			ACPI_DUMP_BUFFER((walk_state->parser_state.aml - 16),
111					 48);
112
113#ifdef ACPI_ASL_COMPILER
114			/*
115			 * This is executed for the disassembler only. Output goes
116			 * to the disassembled ASL output file.
117			 */
118			acpi_os_printf
119			    ("/*\nError: Unknown opcode 0x%.2X at table offset 0x%.4X, context:\n",
120			     walk_state->opcode,
121			     (u32)(aml_offset +
122				   sizeof(struct acpi_table_header)));
123
124			/* Dump the context surrounding the invalid opcode */
125
126			acpi_ut_dump_buffer(((u8 *)walk_state->parser_state.
127					     aml - 16), 48, DB_BYTE_DISPLAY,
128					    (aml_offset +
129					     sizeof(struct acpi_table_header) -
130					     16));
131			acpi_os_printf(" */\n");
132#endif
133		}
134
135		/* Increment past one-byte or two-byte opcode */
136
137		walk_state->parser_state.aml++;
138		if (walk_state->opcode > 0xFF) {	/* Can only happen if first byte is 0x5B */
139			walk_state->parser_state.aml++;
140		}
141
142		return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
143
144	default:
145
146		/* Found opcode info, this is a normal opcode */
147
148		walk_state->parser_state.aml +=
149		    acpi_ps_get_opcode_size(walk_state->opcode);
150		walk_state->arg_types = walk_state->op_info->parse_args;
151		break;
152	}
153
154	return_ACPI_STATUS(AE_OK);
155}
156
157/*******************************************************************************
158 *
159 * FUNCTION:    acpi_ps_build_named_op
160 *
161 * PARAMETERS:  walk_state          - Current state
162 *              aml_op_start        - Begin of named Op in AML
163 *              unnamed_op          - Early Op (not a named Op)
164 *              op                  - Returned Op
165 *
166 * RETURN:      Status
167 *
168 * DESCRIPTION: Parse a named Op
169 *
170 ******************************************************************************/
171
172acpi_status
173acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
174		       u8 *aml_op_start,
175		       union acpi_parse_object *unnamed_op,
176		       union acpi_parse_object **op)
177{
178	acpi_status status = AE_OK;
179	union acpi_parse_object *arg = NULL;
180
181	ACPI_FUNCTION_TRACE_PTR(ps_build_named_op, walk_state);
182
183	unnamed_op->common.value.arg = NULL;
184	unnamed_op->common.arg_list_length = 0;
185	unnamed_op->common.aml_opcode = walk_state->opcode;
186
187	/*
188	 * Get and append arguments until we find the node that contains
189	 * the name (the type ARGP_NAME).
190	 */
191	while (GET_CURRENT_ARG_TYPE(walk_state->arg_types) &&
192	       (GET_CURRENT_ARG_TYPE(walk_state->arg_types) != ARGP_NAME)) {
193		status =
194		    acpi_ps_get_next_arg(walk_state,
195					 &(walk_state->parser_state),
196					 GET_CURRENT_ARG_TYPE(walk_state->
197							      arg_types), &arg);
198		if (ACPI_FAILURE(status)) {
199			return_ACPI_STATUS(status);
200		}
201
202		acpi_ps_append_arg(unnamed_op, arg);
203		INCREMENT_ARG_LIST(walk_state->arg_types);
204	}
205
206	/*
207	 * Make sure that we found a NAME and didn't run out of arguments
208	 */
209	if (!GET_CURRENT_ARG_TYPE(walk_state->arg_types)) {
210		return_ACPI_STATUS(AE_AML_NO_OPERAND);
211	}
212
213	/* We know that this arg is a name, move to next arg */
214
215	INCREMENT_ARG_LIST(walk_state->arg_types);
216
217	/*
218	 * Find the object. This will either insert the object into
219	 * the namespace or simply look it up
220	 */
221	walk_state->op = NULL;
222
223	status = walk_state->descending_callback(walk_state, op);
224	if (ACPI_FAILURE(status)) {
225		if (status != AE_CTRL_TERMINATE) {
226			ACPI_EXCEPTION((AE_INFO, status,
227					"During name lookup/catalog"));
228		}
229		return_ACPI_STATUS(status);
230	}
231
232	if (!*op) {
233		return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
234	}
235
236	status = acpi_ps_next_parse_state(walk_state, *op, status);
237	if (ACPI_FAILURE(status)) {
238		if (status == AE_CTRL_PENDING) {
239			status = AE_CTRL_PARSE_PENDING;
240		}
241		return_ACPI_STATUS(status);
242	}
243
244	acpi_ps_append_arg(*op, unnamed_op->common.value.arg);
245
246	if ((*op)->common.aml_opcode == AML_REGION_OP ||
247	    (*op)->common.aml_opcode == AML_DATA_REGION_OP) {
248		/*
249		 * Defer final parsing of an operation_region body, because we don't
250		 * have enough info in the first pass to parse it correctly (i.e.,
251		 * there may be method calls within the term_arg elements of the body.)
252		 *
253		 * However, we must continue parsing because the opregion is not a
254		 * standalone package -- we don't know where the end is at this point.
255		 *
256		 * (Length is unknown until parse of the body complete)
257		 */
258		(*op)->named.data = aml_op_start;
259		(*op)->named.length = 0;
260	}
261
262	return_ACPI_STATUS(AE_OK);
263}
264
265/*******************************************************************************
266 *
267 * FUNCTION:    acpi_ps_create_op
268 *
269 * PARAMETERS:  walk_state          - Current state
270 *              aml_op_start        - Op start in AML
271 *              new_op              - Returned Op
272 *
273 * RETURN:      Status
274 *
275 * DESCRIPTION: Get Op from AML
276 *
277 ******************************************************************************/
278
279acpi_status
280acpi_ps_create_op(struct acpi_walk_state *walk_state,
281		  u8 *aml_op_start, union acpi_parse_object **new_op)
282{
283	acpi_status status = AE_OK;
284	union acpi_parse_object *op;
285	union acpi_parse_object *named_op = NULL;
286	union acpi_parse_object *parent_scope;
287	u8 argument_count;
288	const struct acpi_opcode_info *op_info;
289
290	ACPI_FUNCTION_TRACE_PTR(ps_create_op, walk_state);
291
292	status = acpi_ps_get_aml_opcode(walk_state);
293	if (status == AE_CTRL_PARSE_CONTINUE) {
294		return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
295	}
296
297	/* Create Op structure and append to parent's argument list */
298
299	walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
300	op = acpi_ps_alloc_op(walk_state->opcode, aml_op_start);
301	if (!op) {
302		return_ACPI_STATUS(AE_NO_MEMORY);
303	}
304
305	if (walk_state->op_info->flags & AML_NAMED) {
306		status =
307		    acpi_ps_build_named_op(walk_state, aml_op_start, op,
308					   &named_op);
309		acpi_ps_free_op(op);
310		if (ACPI_FAILURE(status)) {
311			return_ACPI_STATUS(status);
312		}
313
314		*new_op = named_op;
315		return_ACPI_STATUS(AE_OK);
316	}
317
318	/* Not a named opcode, just allocate Op and append to parent */
319
320	if (walk_state->op_info->flags & AML_CREATE) {
321		/*
322		 * Backup to beginning of create_XXXfield declaration
323		 * body_length is unknown until we parse the body
324		 */
325		op->named.data = aml_op_start;
326		op->named.length = 0;
327	}
328
329	if (walk_state->opcode == AML_BANK_FIELD_OP) {
330		/*
331		 * Backup to beginning of bank_field declaration
332		 * body_length is unknown until we parse the body
333		 */
334		op->named.data = aml_op_start;
335		op->named.length = 0;
336	}
337
338	parent_scope = acpi_ps_get_parent_scope(&(walk_state->parser_state));
339	acpi_ps_append_arg(parent_scope, op);
340
341	if (parent_scope) {
342		op_info =
343		    acpi_ps_get_opcode_info(parent_scope->common.aml_opcode);
344		if (op_info->flags & AML_HAS_TARGET) {
345			argument_count =
346			    acpi_ps_get_argument_count(op_info->type);
347			if (parent_scope->common.arg_list_length >
348			    argument_count) {
349				op->common.flags |= ACPI_PARSEOP_TARGET;
350			}
351		} else if (parent_scope->common.aml_opcode == AML_INCREMENT_OP) {
352			op->common.flags |= ACPI_PARSEOP_TARGET;
353		}
354	}
355
356	if (walk_state->descending_callback != NULL) {
357		/*
358		 * Find the object. This will either insert the object into
359		 * the namespace or simply look it up
360		 */
361		walk_state->op = *new_op = op;
362
363		status = walk_state->descending_callback(walk_state, &op);
364		status = acpi_ps_next_parse_state(walk_state, op, status);
365		if (status == AE_CTRL_PENDING) {
366			status = AE_CTRL_PARSE_PENDING;
367		}
368	}
369
370	return_ACPI_STATUS(status);
371}
372
373/*******************************************************************************
374 *
375 * FUNCTION:    acpi_ps_complete_op
376 *
377 * PARAMETERS:  walk_state          - Current state
378 *              op                  - Returned Op
379 *              status              - Parse status before complete Op
380 *
381 * RETURN:      Status
382 *
383 * DESCRIPTION: Complete Op
384 *
385 ******************************************************************************/
386
387acpi_status
388acpi_ps_complete_op(struct acpi_walk_state *walk_state,
389		    union acpi_parse_object **op, acpi_status status)
390{
391	acpi_status status2;
392
393	ACPI_FUNCTION_TRACE_PTR(ps_complete_op, walk_state);
394
395	/*
396	 * Finished one argument of the containing scope
397	 */
398	walk_state->parser_state.scope->parse_scope.arg_count--;
399
400	/* Close this Op (will result in parse subtree deletion) */
401
402	status2 = acpi_ps_complete_this_op(walk_state, *op);
403	if (ACPI_FAILURE(status2)) {
404		return_ACPI_STATUS(status2);
405	}
406
407	*op = NULL;
408
409	switch (status) {
410	case AE_OK:
411
412		break;
413
414	case AE_CTRL_TRANSFER:
415
416		/* We are about to transfer to a called method */
417
418		walk_state->prev_op = NULL;
419		walk_state->prev_arg_types = walk_state->arg_types;
420		return_ACPI_STATUS(status);
421
422	case AE_CTRL_END:
423
424		acpi_ps_pop_scope(&(walk_state->parser_state), op,
425				  &walk_state->arg_types,
426				  &walk_state->arg_count);
427
428		if (*op) {
429			walk_state->op = *op;
430			walk_state->op_info =
431			    acpi_ps_get_opcode_info((*op)->common.aml_opcode);
432			walk_state->opcode = (*op)->common.aml_opcode;
433
434			status = walk_state->ascending_callback(walk_state);
435			status =
436			    acpi_ps_next_parse_state(walk_state, *op, status);
437
438			status2 = acpi_ps_complete_this_op(walk_state, *op);
439			if (ACPI_FAILURE(status2)) {
440				return_ACPI_STATUS(status2);
441			}
442		}
443
444		status = AE_OK;
445		break;
446
447	case AE_CTRL_BREAK:
448	case AE_CTRL_CONTINUE:
449
450		/* Pop off scopes until we find the While */
451
452		while (!(*op) || ((*op)->common.aml_opcode != AML_WHILE_OP)) {
453			acpi_ps_pop_scope(&(walk_state->parser_state), op,
454					  &walk_state->arg_types,
455					  &walk_state->arg_count);
456		}
457
458		/* Close this iteration of the While loop */
459
460		walk_state->op = *op;
461		walk_state->op_info =
462		    acpi_ps_get_opcode_info((*op)->common.aml_opcode);
463		walk_state->opcode = (*op)->common.aml_opcode;
464
465		status = walk_state->ascending_callback(walk_state);
466		status = acpi_ps_next_parse_state(walk_state, *op, status);
467
468		status2 = acpi_ps_complete_this_op(walk_state, *op);
469		if (ACPI_FAILURE(status2)) {
470			return_ACPI_STATUS(status2);
471		}
472
473		status = AE_OK;
474		break;
475
476	case AE_CTRL_TERMINATE:
477
478		/* Clean up */
479		do {
480			if (*op) {
481				status2 =
482				    acpi_ps_complete_this_op(walk_state, *op);
483				if (ACPI_FAILURE(status2)) {
484					return_ACPI_STATUS(status2);
485				}
486
487				acpi_ut_delete_generic_state
488				    (acpi_ut_pop_generic_state
489				     (&walk_state->control_state));
490			}
491
492			acpi_ps_pop_scope(&(walk_state->parser_state), op,
493					  &walk_state->arg_types,
494					  &walk_state->arg_count);
495
496		} while (*op);
497
498		return_ACPI_STATUS(AE_OK);
499
500	default:		/* All other non-AE_OK status */
501
502		do {
503			if (*op) {
504				status2 =
505				    acpi_ps_complete_this_op(walk_state, *op);
506				if (ACPI_FAILURE(status2)) {
507					return_ACPI_STATUS(status2);
508				}
509			}
510
511			acpi_ps_pop_scope(&(walk_state->parser_state), op,
512					  &walk_state->arg_types,
513					  &walk_state->arg_count);
514
515		} while (*op);
516
517#if 0
518		/*
519		 * TBD: Cleanup parse ops on error
520		 */
521		if (*op == NULL) {
522			acpi_ps_pop_scope(parser_state, op,
523					  &walk_state->arg_types,
524					  &walk_state->arg_count);
525		}
526#endif
527		walk_state->prev_op = NULL;
528		walk_state->prev_arg_types = walk_state->arg_types;
529		return_ACPI_STATUS(status);
530	}
531
532	/* This scope complete? */
533
534	if (acpi_ps_has_completed_scope(&(walk_state->parser_state))) {
535		acpi_ps_pop_scope(&(walk_state->parser_state), op,
536				  &walk_state->arg_types,
537				  &walk_state->arg_count);
538		ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Popped scope, Op=%p\n", *op));
539	} else {
540		*op = NULL;
541	}
542
543	return_ACPI_STATUS(AE_OK);
544}
545
546/*******************************************************************************
547 *
548 * FUNCTION:    acpi_ps_complete_final_op
549 *
550 * PARAMETERS:  walk_state          - Current state
551 *              op                  - Current Op
552 *              status              - Current parse status before complete last
553 *                                    Op
554 *
555 * RETURN:      Status
556 *
557 * DESCRIPTION: Complete last Op.
558 *
559 ******************************************************************************/
560
561acpi_status
562acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
563			  union acpi_parse_object *op, acpi_status status)
564{
565	acpi_status status2;
566
567	ACPI_FUNCTION_TRACE_PTR(ps_complete_final_op, walk_state);
568
569	/*
570	 * Complete the last Op (if not completed), and clear the scope stack.
571	 * It is easily possible to end an AML "package" with an unbounded number
572	 * of open scopes (such as when several ASL blocks are closed with
573	 * sequential closing braces). We want to terminate each one cleanly.
574	 */
575	ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "AML package complete at Op %p\n",
576			  op));
577	do {
578		if (op) {
579			if (walk_state->ascending_callback != NULL) {
580				walk_state->op = op;
581				walk_state->op_info =
582				    acpi_ps_get_opcode_info(op->common.
583							    aml_opcode);
584				walk_state->opcode = op->common.aml_opcode;
585
586				status =
587				    walk_state->ascending_callback(walk_state);
588				status =
589				    acpi_ps_next_parse_state(walk_state, op,
590							     status);
591				if (status == AE_CTRL_PENDING) {
592					status =
593					    acpi_ps_complete_op(walk_state, &op,
594								AE_OK);
595					if (ACPI_FAILURE(status)) {
596						return_ACPI_STATUS(status);
597					}
598				}
599
600				if (status == AE_CTRL_TERMINATE) {
601					status = AE_OK;
602
603					/* Clean up */
604					do {
605						if (op) {
606							status2 =
607							    acpi_ps_complete_this_op
608							    (walk_state, op);
609							if (ACPI_FAILURE
610							    (status2)) {
611								return_ACPI_STATUS
612								    (status2);
613							}
614						}
615
616						acpi_ps_pop_scope(&
617								  (walk_state->
618								   parser_state),
619								  &op,
620								  &walk_state->
621								  arg_types,
622								  &walk_state->
623								  arg_count);
624
625					} while (op);
626
627					return_ACPI_STATUS(status);
628				}
629
630				else if (ACPI_FAILURE(status)) {
631
632					/* First error is most important */
633
634					(void)
635					    acpi_ps_complete_this_op(walk_state,
636								     op);
637					return_ACPI_STATUS(status);
638				}
639			}
640
641			status2 = acpi_ps_complete_this_op(walk_state, op);
642			if (ACPI_FAILURE(status2)) {
643				return_ACPI_STATUS(status2);
644			}
645		}
646
647		acpi_ps_pop_scope(&(walk_state->parser_state), &op,
648				  &walk_state->arg_types,
649				  &walk_state->arg_count);
650
651	} while (op);
652
653	return_ACPI_STATUS(status);
654}
655