1/*
2 * intel-mid.c: Intel MID platform setup code
3 *
4 * (C) Copyright 2008, 2012 Intel Corporation
5 * Author: Jacob Pan (jacob.jun.pan@intel.com)
6 * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; version 2
11 * of the License.
12 */
13
14#define pr_fmt(fmt) "intel_mid: " fmt
15
16#include <linux/init.h>
17#include <linux/kernel.h>
18#include <linux/interrupt.h>
19#include <linux/scatterlist.h>
20#include <linux/sfi.h>
21#include <linux/irq.h>
22#include <linux/module.h>
23#include <linux/notifier.h>
24
25#include <asm/setup.h>
26#include <asm/mpspec_def.h>
27#include <asm/hw_irq.h>
28#include <asm/apic.h>
29#include <asm/io_apic.h>
30#include <asm/intel-mid.h>
31#include <asm/intel_mid_vrtc.h>
32#include <asm/io.h>
33#include <asm/i8259.h>
34#include <asm/intel_scu_ipc.h>
35#include <asm/apb_timer.h>
36#include <asm/reboot.h>
37
38#include "intel_mid_weak_decls.h"
39
40/*
41 * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
42 * cmdline option x86_intel_mid_timer can be used to override the configuration
43 * to prefer one or the other.
44 * at runtime, there are basically three timer configurations:
45 * 1. per cpu apbt clock only
46 * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
47 * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
48 *
49 * by default (without cmdline option), platform code first detects cpu type
50 * to see if we are on lincroft or penwell, then set up both lapic or apbt
51 * clocks accordingly.
52 * i.e. by default, medfield uses configuration #2, moorestown uses #1.
53 * config #3 is supported but not recommended on medfield.
54 *
55 * rating and feature summary:
56 * lapic (with C3STOP) --------- 100
57 * apbt (always-on) ------------ 110
58 * lapic (always-on,ARAT) ------ 150
59 */
60
61enum intel_mid_timer_options intel_mid_timer_options;
62
63/* intel_mid_ops to store sub arch ops */
64static struct intel_mid_ops *intel_mid_ops;
65/* getter function for sub arch ops*/
66static void *(*get_intel_mid_ops[])(void) = INTEL_MID_OPS_INIT;
67enum intel_mid_cpu_type __intel_mid_cpu_chip;
68EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
69
70static void intel_mid_power_off(void)
71{
72};
73
74static void intel_mid_reboot(void)
75{
76	intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
77}
78
79static unsigned long __init intel_mid_calibrate_tsc(void)
80{
81	return 0;
82}
83
84static void __init intel_mid_setup_bp_timer(void)
85{
86	apbt_time_init();
87	setup_boot_APIC_clock();
88}
89
90static void __init intel_mid_time_init(void)
91{
92	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
93
94	switch (intel_mid_timer_options) {
95	case INTEL_MID_TIMER_APBT_ONLY:
96		break;
97	case INTEL_MID_TIMER_LAPIC_APBT:
98		/* Use apbt and local apic */
99		x86_init.timers.setup_percpu_clockev = intel_mid_setup_bp_timer;
100		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
101		return;
102	default:
103		if (!boot_cpu_has(X86_FEATURE_ARAT))
104			break;
105		/* Lapic only, no apbt */
106		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
107		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
108		return;
109	}
110
111	x86_init.timers.setup_percpu_clockev = apbt_time_init;
112}
113
114static void intel_mid_arch_setup(void)
115{
116	if (boot_cpu_data.x86 != 6) {
117		pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
118			boot_cpu_data.x86, boot_cpu_data.x86_model);
119		__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
120		goto out;
121	}
122
123	switch (boot_cpu_data.x86_model) {
124	case 0x35:
125		__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_CLOVERVIEW;
126		break;
127	case 0x3C:
128	case 0x4A:
129		__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_TANGIER;
130		break;
131	case 0x27:
132	default:
133		__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
134		break;
135	}
136
137	if (__intel_mid_cpu_chip < MAX_CPU_OPS(get_intel_mid_ops))
138		intel_mid_ops = get_intel_mid_ops[__intel_mid_cpu_chip]();
139	else {
140		intel_mid_ops = get_intel_mid_ops[INTEL_MID_CPU_CHIP_PENWELL]();
141		pr_info("ARCH: Unknown SoC, assuming PENWELL!\n");
142	}
143
144out:
145	if (intel_mid_ops->arch_setup)
146		intel_mid_ops->arch_setup();
147}
148
149/* MID systems don't have i8042 controller */
150static int intel_mid_i8042_detect(void)
151{
152	return 0;
153}
154
155/*
156 * Moorestown does not have external NMI source nor port 0x61 to report
157 * NMI status. The possible NMI sources are from pmu as a result of NMI
158 * watchdog or lock debug. Reading io port 0x61 results in 0xff which
159 * misled NMI handler.
160 */
161static unsigned char intel_mid_get_nmi_reason(void)
162{
163	return 0;
164}
165
166/*
167 * Moorestown specific x86_init function overrides and early setup
168 * calls.
169 */
170void __init x86_intel_mid_early_setup(void)
171{
172	x86_init.resources.probe_roms = x86_init_noop;
173	x86_init.resources.reserve_resources = x86_init_noop;
174
175	x86_init.timers.timer_init = intel_mid_time_init;
176	x86_init.timers.setup_percpu_clockev = x86_init_noop;
177
178	x86_init.irqs.pre_vector_init = x86_init_noop;
179
180	x86_init.oem.arch_setup = intel_mid_arch_setup;
181
182	x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
183
184	x86_platform.calibrate_tsc = intel_mid_calibrate_tsc;
185	x86_platform.i8042_detect = intel_mid_i8042_detect;
186	x86_init.timers.wallclock_init = intel_mid_rtc_init;
187	x86_platform.get_nmi_reason = intel_mid_get_nmi_reason;
188
189	x86_init.pci.init = intel_mid_pci_init;
190	x86_init.pci.fixup_irqs = x86_init_noop;
191
192	legacy_pic = &null_legacy_pic;
193
194	pm_power_off = intel_mid_power_off;
195	machine_ops.emergency_restart  = intel_mid_reboot;
196
197	/* Avoid searching for BIOS MP tables */
198	x86_init.mpparse.find_smp_config = x86_init_noop;
199	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
200	set_bit(MP_BUS_ISA, mp_bus_not_pci);
201}
202
203/*
204 * if user does not want to use per CPU apb timer, just give it a lower rating
205 * than local apic timer and skip the late per cpu timer init.
206 */
207static inline int __init setup_x86_intel_mid_timer(char *arg)
208{
209	if (!arg)
210		return -EINVAL;
211
212	if (strcmp("apbt_only", arg) == 0)
213		intel_mid_timer_options = INTEL_MID_TIMER_APBT_ONLY;
214	else if (strcmp("lapic_and_apbt", arg) == 0)
215		intel_mid_timer_options = INTEL_MID_TIMER_LAPIC_APBT;
216	else {
217		pr_warn("X86 INTEL_MID timer option %s not recognised"
218			   " use x86_intel_mid_timer=apbt_only or lapic_and_apbt\n",
219			   arg);
220		return -EINVAL;
221	}
222	return 0;
223}
224__setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer);
225
226