1#ifdef __ASSEMBLY__
2
3/* EcoVec board specific boot code:
4 * converts the "partner-jet-script.txt" script into assembly
5 * the assembly code is the first code to be executed in the romImage
6 */
7
8#include <asm/romimage-macros.h>
9#include <mach/partner-jet-setup.txt>
10
11	/* execute icbi after enabling cache */
12	mov.l	1f, r0
13	icbi	@r0
14
15	/* jump to cached area */
16	mova	2f, r0
17	jmp	@r0
18	nop
19
20	.align 2
211 :	.long 0xa8000000
222 :
23
24#else /* __ASSEMBLY__ */
25
26/* Ecovec board specific information:
27 *
28 * Set the following to enable MMCIF boot from the MMC card in CN12:
29 *
30 * DS1.5 = OFF (SH BOOT pin set to L)
31 * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
32 * DS2.7 = ON  (Select MMCIF on CN12 instead of SDHI1)
33 *
34 */
35#define HIZCRA		0xa4050158
36#define PGDR		0xa405012c
37
38static inline void mmcif_update_progress(int nr)
39{
40	/* disable Hi-Z for LED pins */
41	__raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
42
43	/* update progress on LED4, LED5, LED6 and LED7 */
44	__raw_writeb(1 << (nr - 1), PGDR);
45}
46
47#endif /* __ASSEMBLY__ */
48