1/*
2 * Low-level SPU handling
3 *
4 * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
5 *
6 * Author: Arnd Bergmann <arndb@de.ibm.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2, or (at your option)
11 * any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22#include <linux/sched.h>
23#include <linux/mm.h>
24
25#include <asm/spu.h>
26#include <asm/spu_csa.h>
27
28#include "spufs.h"
29
30/**
31 * Handle an SPE event, depending on context SPU_CREATE_EVENTS_ENABLED flag.
32 *
33 * If the context was created with events, we just set the return event.
34 * Otherwise, send an appropriate signal to the process.
35 */
36static void spufs_handle_event(struct spu_context *ctx,
37				unsigned long ea, int type)
38{
39	siginfo_t info;
40
41	if (ctx->flags & SPU_CREATE_EVENTS_ENABLED) {
42		ctx->event_return |= type;
43		wake_up_all(&ctx->stop_wq);
44		return;
45	}
46
47	memset(&info, 0, sizeof(info));
48
49	switch (type) {
50	case SPE_EVENT_INVALID_DMA:
51		info.si_signo = SIGBUS;
52		info.si_code = BUS_OBJERR;
53		break;
54	case SPE_EVENT_SPE_DATA_STORAGE:
55		info.si_signo = SIGSEGV;
56		info.si_addr = (void __user *)ea;
57		info.si_code = SEGV_ACCERR;
58		ctx->ops->restart_dma(ctx);
59		break;
60	case SPE_EVENT_DMA_ALIGNMENT:
61		info.si_signo = SIGBUS;
62		/* DAR isn't set for an alignment fault :( */
63		info.si_code = BUS_ADRALN;
64		break;
65	case SPE_EVENT_SPE_ERROR:
66		info.si_signo = SIGILL;
67		info.si_addr = (void __user *)(unsigned long)
68			ctx->ops->npc_read(ctx) - 4;
69		info.si_code = ILL_ILLOPC;
70		break;
71	}
72
73	if (info.si_signo)
74		force_sig_info(info.si_signo, &info, current);
75}
76
77int spufs_handle_class0(struct spu_context *ctx)
78{
79	unsigned long stat = ctx->csa.class_0_pending & CLASS0_INTR_MASK;
80
81	if (likely(!stat))
82		return 0;
83
84	if (stat & CLASS0_DMA_ALIGNMENT_INTR)
85		spufs_handle_event(ctx, ctx->csa.class_0_dar,
86			SPE_EVENT_DMA_ALIGNMENT);
87
88	if (stat & CLASS0_INVALID_DMA_COMMAND_INTR)
89		spufs_handle_event(ctx, ctx->csa.class_0_dar,
90			SPE_EVENT_INVALID_DMA);
91
92	if (stat & CLASS0_SPU_ERROR_INTR)
93		spufs_handle_event(ctx, ctx->csa.class_0_dar,
94			SPE_EVENT_SPE_ERROR);
95
96	ctx->csa.class_0_pending = 0;
97
98	return -EIO;
99}
100
101/*
102 * bottom half handler for page faults, we can't do this from
103 * interrupt context, since we might need to sleep.
104 * we also need to give up the mutex so we can get scheduled
105 * out while waiting for the backing store.
106 *
107 * TODO: try calling hash_page from the interrupt handler first
108 *       in order to speed up the easy case.
109 */
110int spufs_handle_class1(struct spu_context *ctx)
111{
112	u64 ea, dsisr, access;
113	unsigned long flags;
114	unsigned flt = 0;
115	int ret;
116
117	/*
118	 * dar and dsisr get passed from the registers
119	 * to the spu_context, to this function, but not
120	 * back to the spu if it gets scheduled again.
121	 *
122	 * if we don't handle the fault for a saved context
123	 * in time, we can still expect to get the same fault
124	 * the immediately after the context restore.
125	 */
126	ea = ctx->csa.class_1_dar;
127	dsisr = ctx->csa.class_1_dsisr;
128
129	if (!(dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)))
130		return 0;
131
132	spuctx_switch_state(ctx, SPU_UTIL_IOWAIT);
133
134	pr_debug("ctx %p: ea %016llx, dsisr %016llx state %d\n", ctx, ea,
135		dsisr, ctx->state);
136
137	ctx->stats.hash_flt++;
138	if (ctx->state == SPU_STATE_RUNNABLE)
139		ctx->spu->stats.hash_flt++;
140
141	/* we must not hold the lock when entering copro_handle_mm_fault */
142	spu_release(ctx);
143
144	access = (_PAGE_PRESENT | _PAGE_USER);
145	access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL;
146	local_irq_save(flags);
147	ret = hash_page(ea, access, 0x300, dsisr);
148	local_irq_restore(flags);
149
150	/* hashing failed, so try the actual fault handler */
151	if (ret)
152		ret = copro_handle_mm_fault(current->mm, ea, dsisr, &flt);
153
154	/*
155	 * This is nasty: we need the state_mutex for all the bookkeeping even
156	 * if the syscall was interrupted by a signal. ewww.
157	 */
158	mutex_lock(&ctx->state_mutex);
159
160	/*
161	 * Clear dsisr under ctxt lock after handling the fault, so that
162	 * time slicing will not preempt the context while the page fault
163	 * handler is running. Context switch code removes mappings.
164	 */
165	ctx->csa.class_1_dar = ctx->csa.class_1_dsisr = 0;
166
167	/*
168	 * If we handled the fault successfully and are in runnable
169	 * state, restart the DMA.
170	 * In case of unhandled error report the problem to user space.
171	 */
172	if (!ret) {
173		if (flt & VM_FAULT_MAJOR)
174			ctx->stats.maj_flt++;
175		else
176			ctx->stats.min_flt++;
177		if (ctx->state == SPU_STATE_RUNNABLE) {
178			if (flt & VM_FAULT_MAJOR)
179				ctx->spu->stats.maj_flt++;
180			else
181				ctx->spu->stats.min_flt++;
182		}
183
184		if (ctx->spu)
185			ctx->ops->restart_dma(ctx);
186	} else
187		spufs_handle_event(ctx, ea, SPE_EVENT_SPE_DATA_STORAGE);
188
189	spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
190	return ret;
191}
192