1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License.  See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1992 Linus Torvalds
7 * Copyright (C) 1994 - 2001, 2003, 07 Ralf Baechle
8 */
9#include <linux/clockchips.h>
10#include <linux/i8253.h>
11#include <linux/init.h>
12#include <linux/interrupt.h>
13#include <linux/kernel.h>
14#include <linux/smp.h>
15#include <linux/spinlock.h>
16#include <linux/irq.h>
17
18#include <asm/irq_cpu.h>
19#include <asm/i8259.h>
20#include <asm/io.h>
21#include <asm/jazz.h>
22#include <asm/pgtable.h>
23#include <asm/tlbmisc.h>
24
25static DEFINE_RAW_SPINLOCK(r4030_lock);
26
27static void enable_r4030_irq(struct irq_data *d)
28{
29	unsigned int mask = 1 << (d->irq - JAZZ_IRQ_START);
30	unsigned long flags;
31
32	raw_spin_lock_irqsave(&r4030_lock, flags);
33	mask |= r4030_read_reg16(JAZZ_IO_IRQ_ENABLE);
34	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, mask);
35	raw_spin_unlock_irqrestore(&r4030_lock, flags);
36}
37
38void disable_r4030_irq(struct irq_data *d)
39{
40	unsigned int mask = ~(1 << (d->irq - JAZZ_IRQ_START));
41	unsigned long flags;
42
43	raw_spin_lock_irqsave(&r4030_lock, flags);
44	mask &= r4030_read_reg16(JAZZ_IO_IRQ_ENABLE);
45	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, mask);
46	raw_spin_unlock_irqrestore(&r4030_lock, flags);
47}
48
49static struct irq_chip r4030_irq_type = {
50	.name = "R4030",
51	.irq_mask = disable_r4030_irq,
52	.irq_unmask = enable_r4030_irq,
53};
54
55void __init init_r4030_ints(void)
56{
57	int i;
58
59	for (i = JAZZ_IRQ_START; i <= JAZZ_IRQ_END; i++)
60		irq_set_chip_and_handler(i, &r4030_irq_type, handle_level_irq);
61
62	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, 0);
63	r4030_read_reg16(JAZZ_IO_IRQ_SOURCE);		/* clear pending IRQs */
64	r4030_read_reg32(JAZZ_R4030_INVAL_ADDR);	/* clear error bits */
65}
66
67/*
68 * On systems with i8259-style interrupt controllers we assume for
69 * driver compatibility reasons interrupts 0 - 15 to be the i8259
70 * interrupts even if the hardware uses a different interrupt numbering.
71 */
72void __init arch_init_irq(void)
73{
74	/*
75	 * this is a hack to get back the still needed wired mapping
76	 * killed by init_mm()
77	 */
78
79	/* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */
80	add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K);
81	/* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */
82	add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M);
83	/* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */
84	add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M);
85
86	init_i8259_irqs();			/* Integrated i8259  */
87	mips_cpu_irq_init();
88	init_r4030_ints();
89
90	change_c0_status(ST0_IM, IE_IRQ2 | IE_IRQ1);
91}
92
93asmlinkage void plat_irq_dispatch(void)
94{
95	unsigned int pending = read_c0_cause() & read_c0_status();
96	unsigned int irq;
97
98	if (pending & IE_IRQ4) {
99		r4030_read_reg32(JAZZ_TIMER_REGISTER);
100		do_IRQ(JAZZ_TIMER_IRQ);
101	} else if (pending & IE_IRQ2) {
102		irq = *(volatile u8 *)JAZZ_EISA_IRQ_ACK;
103		do_IRQ(irq);
104	} else if (pending & IE_IRQ1) {
105		irq = *(volatile u8 *)JAZZ_IO_IRQ_SOURCE >> 2;
106		if (likely(irq > 0))
107			do_IRQ(irq + JAZZ_IRQ_START - 1);
108		else
109			panic("Unimplemented loc_no_irq handler");
110	}
111}
112
113struct clock_event_device r4030_clockevent = {
114	.name		= "r4030",
115	.features	= CLOCK_EVT_FEAT_PERIODIC,
116	.rating		= 300,
117	.irq		= JAZZ_TIMER_IRQ,
118};
119
120static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id)
121{
122	struct clock_event_device *cd = dev_id;
123
124	cd->event_handler(cd);
125	return IRQ_HANDLED;
126}
127
128static struct irqaction r4030_timer_irqaction = {
129	.handler	= r4030_timer_interrupt,
130	.flags		= IRQF_TIMER,
131	.name		= "R4030 timer",
132};
133
134void __init plat_time_init(void)
135{
136	struct clock_event_device *cd = &r4030_clockevent;
137	struct irqaction *action = &r4030_timer_irqaction;
138	unsigned int cpu = smp_processor_id();
139
140	BUG_ON(HZ != 100);
141
142	cd->cpumask		= cpumask_of(cpu);
143	clockevents_register_device(cd);
144	action->dev_id = cd;
145	setup_irq(JAZZ_TIMER_IRQ, action);
146
147	/*
148	 * Set clock to 100Hz.
149	 *
150	 * The R4030 timer receives an input clock of 1kHz which is divieded by
151	 * a programmable 4-bit divider.  This makes it fairly inflexible.
152	 */
153	r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9);
154	setup_pit_timer();
155}
156