1
2/***********************license start***************
3 * Author: Cavium Networks
4 *
5 * Contact: support@caviumnetworks.com
6 * This file is part of the OCTEON SDK
7 *
8 * Copyright (c) 2003-2008 Cavium Networks
9 *
10 * This file is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License, Version 2, as
12 * published by the Free Software Foundation.
13 *
14 * This file is distributed in the hope that it will be useful, but
15 * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
16 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
17 * NONINFRINGEMENT.  See the GNU General Public License for more
18 * details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this file; if not, write to the Free Software
22 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
23 * or visit http://www.gnu.org/licenses/.
24 *
25 * This file may also be available under a different license from Cavium.
26 * Contact Cavium Networks for more information
27 ***********************license end**************************************/
28
29/**
30 *
31 * Helper utilities for qlm_jtag.
32 *
33 */
34
35#include <asm/octeon/octeon.h>
36#include <asm/octeon/cvmx-helper-jtag.h>
37
38
39/**
40 * Initialize the internal QLM JTAG logic to allow programming
41 * of the JTAG chain by the cvmx_helper_qlm_jtag_*() functions.
42 * These functions should only be used at the direction of Cavium
43 * Networks. Programming incorrect values into the JTAG chain
44 * can cause chip damage.
45 */
46void cvmx_helper_qlm_jtag_init(void)
47{
48	union cvmx_ciu_qlm_jtgc jtgc;
49	uint32_t clock_div = 0;
50	uint32_t divisor = cvmx_sysinfo_get()->cpu_clock_hz / (25 * 1000000);
51	divisor = (divisor - 1) >> 2;
52	/* Convert the divisor into a power of 2 shift */
53	while (divisor) {
54		clock_div++;
55		divisor = divisor >> 1;
56	}
57
58	/*
59	 * Clock divider for QLM JTAG operations.  eclk is divided by
60	 * 2^(CLK_DIV + 2)
61	 */
62	jtgc.u64 = 0;
63	jtgc.s.clk_div = clock_div;
64	jtgc.s.mux_sel = 0;
65	if (OCTEON_IS_MODEL(OCTEON_CN52XX))
66		jtgc.s.bypass = 0x3;
67	else
68		jtgc.s.bypass = 0xf;
69	cvmx_write_csr(CVMX_CIU_QLM_JTGC, jtgc.u64);
70	cvmx_read_csr(CVMX_CIU_QLM_JTGC);
71}
72
73/**
74 * Write up to 32bits into the QLM jtag chain. Bits are shifted
75 * into the MSB and out the LSB, so you should shift in the low
76 * order bits followed by the high order bits. The JTAG chain is
77 * 4 * 268 bits long, or 1072.
78 *
79 * @qlm:    QLM to shift value into
80 * @bits:   Number of bits to shift in (1-32).
81 * @data:   Data to shift in. Bit 0 enters the chain first, followed by
82 *		 bit 1, etc.
83 *
84 * Returns The low order bits of the JTAG chain that shifted out of the
85 *	   circle.
86 */
87uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data)
88{
89	union cvmx_ciu_qlm_jtgd jtgd;
90	jtgd.u64 = 0;
91	jtgd.s.shift = 1;
92	jtgd.s.shft_cnt = bits - 1;
93	jtgd.s.shft_reg = data;
94	if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X))
95		jtgd.s.select = 1 << qlm;
96	cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64);
97	do {
98		jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD);
99	} while (jtgd.s.shift);
100	return jtgd.s.shft_reg >> (32 - bits);
101}
102
103/**
104 * Shift long sequences of zeros into the QLM JTAG chain. It is
105 * common to need to shift more than 32 bits of zeros into the
106 * chain. This function is a convience wrapper around
107 * cvmx_helper_qlm_jtag_shift() to shift more than 32 bits of
108 * zeros at a time.
109 *
110 * @qlm:    QLM to shift zeros into
111 * @bits:
112 */
113void cvmx_helper_qlm_jtag_shift_zeros(int qlm, int bits)
114{
115	while (bits > 0) {
116		int n = bits;
117		if (n > 32)
118			n = 32;
119		cvmx_helper_qlm_jtag_shift(qlm, n, 0);
120		bits -= n;
121	}
122}
123
124/**
125 * Program the QLM JTAG chain into all lanes of the QLM. You must
126 * have already shifted in 268*4, or 1072 bits into the JTAG
127 * chain. Updating invalid values can possibly cause chip damage.
128 *
129 * @qlm:    QLM to program
130 */
131void cvmx_helper_qlm_jtag_update(int qlm)
132{
133	union cvmx_ciu_qlm_jtgd jtgd;
134
135	/* Update the new data */
136	jtgd.u64 = 0;
137	jtgd.s.update = 1;
138	if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X))
139		jtgd.s.select = 1 << qlm;
140	cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64);
141	do {
142		jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD);
143	} while (jtgd.s.update);
144}
145