1/* 2 * Ubiquiti Networks XM (rev 1.0) board support 3 * 4 * Copyright (C) 2011 Ren�� Bolldorf <xsecute@googlemail.com> 5 * 6 * Derived from: mach-pb44.c 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License version 2 as published 10 * by the Free Software Foundation. 11 */ 12 13#include <linux/init.h> 14#include <linux/pci.h> 15#include <linux/ath9k_platform.h> 16 17#include <asm/mach-ath79/irq.h> 18 19#include "machtypes.h" 20#include "dev-gpio-buttons.h" 21#include "dev-leds-gpio.h" 22#include "dev-spi.h" 23#include "pci.h" 24 25#define UBNT_XM_GPIO_LED_L1 0 26#define UBNT_XM_GPIO_LED_L2 1 27#define UBNT_XM_GPIO_LED_L3 11 28#define UBNT_XM_GPIO_LED_L4 7 29 30#define UBNT_XM_GPIO_BTN_RESET 12 31 32#define UBNT_XM_KEYS_POLL_INTERVAL 20 33#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) 34 35#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000) 36 37static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { 38 { 39 .name = "ubnt-xm:red:link1", 40 .gpio = UBNT_XM_GPIO_LED_L1, 41 .active_low = 0, 42 }, { 43 .name = "ubnt-xm:orange:link2", 44 .gpio = UBNT_XM_GPIO_LED_L2, 45 .active_low = 0, 46 }, { 47 .name = "ubnt-xm:green:link3", 48 .gpio = UBNT_XM_GPIO_LED_L3, 49 .active_low = 0, 50 }, { 51 .name = "ubnt-xm:green:link4", 52 .gpio = UBNT_XM_GPIO_LED_L4, 53 .active_low = 0, 54 }, 55}; 56 57static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = { 58 { 59 .desc = "reset", 60 .type = EV_KEY, 61 .code = KEY_RESTART, 62 .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, 63 .gpio = UBNT_XM_GPIO_BTN_RESET, 64 .active_low = 1, 65 } 66}; 67 68static struct spi_board_info ubnt_xm_spi_info[] = { 69 { 70 .bus_num = 0, 71 .chip_select = 0, 72 .max_speed_hz = 25000000, 73 .modalias = "mx25l6405d", 74 } 75}; 76 77static struct ath79_spi_platform_data ubnt_xm_spi_data = { 78 .bus_num = 0, 79 .num_chipselect = 1, 80}; 81 82#ifdef CONFIG_PCI 83static struct ath9k_platform_data ubnt_xm_eeprom_data; 84 85static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev) 86{ 87 switch (PCI_SLOT(dev->devfn)) { 88 case 0: 89 dev->dev.platform_data = &ubnt_xm_eeprom_data; 90 break; 91 } 92 93 return 0; 94} 95 96static void __init ubnt_xm_pci_init(void) 97{ 98 memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, 99 sizeof(ubnt_xm_eeprom_data.eeprom_data)); 100 101 ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init); 102 ath79_register_pci(); 103} 104#else 105static inline void ubnt_xm_pci_init(void) {} 106#endif /* CONFIG_PCI */ 107 108static void __init ubnt_xm_init(void) 109{ 110 ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), 111 ubnt_xm_leds_gpio); 112 113 ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, 114 ARRAY_SIZE(ubnt_xm_gpio_keys), 115 ubnt_xm_gpio_keys); 116 117 ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info, 118 ARRAY_SIZE(ubnt_xm_spi_info)); 119 120 ubnt_xm_pci_init(); 121} 122 123MIPS_MACHINE(ATH79_MACH_UBNT_XM, 124 "UBNT-XM", 125 "Ubiquiti Networks XM (rev 1.0) board", 126 ubnt_xm_init); 127