1/* 2 * This file contains the light-weight system call handlers (fsyscall-handlers). 3 * 4 * Copyright (C) 2003 Hewlett-Packard Co 5 * David Mosberger-Tang <davidm@hpl.hp.com> 6 * 7 * 25-Sep-03 davidm Implement fsys_rt_sigprocmask(). 8 * 18-Feb-03 louisk Implement fsys_gettimeofday(). 9 * 28-Feb-03 davidm Fixed several bugs in fsys_gettimeofday(). Tuned it some more, 10 * probably broke it along the way... ;-) 11 * 13-Jul-04 clameter Implement fsys_clock_gettime and revise fsys_gettimeofday to make 12 * it capable of using memory based clocks without falling back to C code. 13 * 08-Feb-07 Fenghua Yu Implement fsys_getcpu. 14 * 15 */ 16 17#include <asm/asmmacro.h> 18#include <asm/errno.h> 19#include <asm/asm-offsets.h> 20#include <asm/percpu.h> 21#include <asm/thread_info.h> 22#include <asm/sal.h> 23#include <asm/signal.h> 24#include <asm/unistd.h> 25 26#include "entry.h" 27#include <asm/native/inst.h> 28 29/* 30 * See Documentation/ia64/fsys.txt for details on fsyscalls. 31 * 32 * On entry to an fsyscall handler: 33 * r10 = 0 (i.e., defaults to "successful syscall return") 34 * r11 = saved ar.pfs (a user-level value) 35 * r15 = system call number 36 * r16 = "current" task pointer (in normal kernel-mode, this is in r13) 37 * r32-r39 = system call arguments 38 * b6 = return address (a user-level value) 39 * ar.pfs = previous frame-state (a user-level value) 40 * PSR.be = cleared to zero (i.e., little-endian byte order is in effect) 41 * all other registers may contain values passed in from user-mode 42 * 43 * On return from an fsyscall handler: 44 * r11 = saved ar.pfs (as passed into the fsyscall handler) 45 * r15 = system call number (as passed into the fsyscall handler) 46 * r32-r39 = system call arguments (as passed into the fsyscall handler) 47 * b6 = return address (as passed into the fsyscall handler) 48 * ar.pfs = previous frame-state (as passed into the fsyscall handler) 49 */ 50 51ENTRY(fsys_ni_syscall) 52 .prologue 53 .altrp b6 54 .body 55 mov r8=ENOSYS 56 mov r10=-1 57 FSYS_RETURN 58END(fsys_ni_syscall) 59 60ENTRY(fsys_getpid) 61 .prologue 62 .altrp b6 63 .body 64 add r17=IA64_TASK_GROUP_LEADER_OFFSET,r16 65 ;; 66 ld8 r17=[r17] // r17 = current->group_leader 67 add r9=TI_FLAGS+IA64_TASK_SIZE,r16 68 ;; 69 ld4 r9=[r9] 70 add r17=IA64_TASK_TGIDLINK_OFFSET,r17 71 ;; 72 and r9=TIF_ALLWORK_MASK,r9 73 ld8 r17=[r17] // r17 = current->group_leader->pids[PIDTYPE_PID].pid 74 ;; 75 add r8=IA64_PID_LEVEL_OFFSET,r17 76 ;; 77 ld4 r8=[r8] // r8 = pid->level 78 add r17=IA64_PID_UPID_OFFSET,r17 // r17 = &pid->numbers[0] 79 ;; 80 shl r8=r8,IA64_UPID_SHIFT 81 ;; 82 add r17=r17,r8 // r17 = &pid->numbers[pid->level] 83 ;; 84 ld4 r8=[r17] // r8 = pid->numbers[pid->level].nr 85 ;; 86 mov r17=0 87 ;; 88 cmp.ne p8,p0=0,r9 89(p8) br.spnt.many fsys_fallback_syscall 90 FSYS_RETURN 91END(fsys_getpid) 92 93ENTRY(fsys_set_tid_address) 94 .prologue 95 .altrp b6 96 .body 97 add r9=TI_FLAGS+IA64_TASK_SIZE,r16 98 add r17=IA64_TASK_TGIDLINK_OFFSET,r16 99 ;; 100 ld4 r9=[r9] 101 tnat.z p6,p7=r32 // check argument register for being NaT 102 ld8 r17=[r17] // r17 = current->pids[PIDTYPE_PID].pid 103 ;; 104 and r9=TIF_ALLWORK_MASK,r9 105 add r8=IA64_PID_LEVEL_OFFSET,r17 106 add r18=IA64_TASK_CLEAR_CHILD_TID_OFFSET,r16 107 ;; 108 ld4 r8=[r8] // r8 = pid->level 109 add r17=IA64_PID_UPID_OFFSET,r17 // r17 = &pid->numbers[0] 110 ;; 111 shl r8=r8,IA64_UPID_SHIFT 112 ;; 113 add r17=r17,r8 // r17 = &pid->numbers[pid->level] 114 ;; 115 ld4 r8=[r17] // r8 = pid->numbers[pid->level].nr 116 ;; 117 cmp.ne p8,p0=0,r9 118 mov r17=-1 119 ;; 120(p6) st8 [r18]=r32 121(p7) st8 [r18]=r17 122(p8) br.spnt.many fsys_fallback_syscall 123 ;; 124 mov r17=0 // i must not leak kernel bits... 125 mov r18=0 // i must not leak kernel bits... 126 FSYS_RETURN 127END(fsys_set_tid_address) 128 129#if IA64_GTOD_SEQ_OFFSET !=0 130#error fsys_gettimeofday incompatible with changes to struct fsyscall_gtod_data_t 131#endif 132#if IA64_ITC_JITTER_OFFSET !=0 133#error fsys_gettimeofday incompatible with changes to struct itc_jitter_data_t 134#endif 135#define CLOCK_REALTIME 0 136#define CLOCK_MONOTONIC 1 137#define CLOCK_DIVIDE_BY_1000 0x4000 138#define CLOCK_ADD_MONOTONIC 0x8000 139 140ENTRY(fsys_gettimeofday) 141 .prologue 142 .altrp b6 143 .body 144 mov r31 = r32 145 tnat.nz p6,p0 = r33 // guard against NaT argument 146(p6) br.cond.spnt.few .fail_einval 147 mov r30 = CLOCK_DIVIDE_BY_1000 148 ;; 149.gettime: 150 // Register map 151 // Incoming r31 = pointer to address where to place result 152 // r30 = flags determining how time is processed 153 // r2,r3 = temp r4-r7 preserved 154 // r8 = result nanoseconds 155 // r9 = result seconds 156 // r10 = temporary storage for clock difference 157 // r11 = preserved: saved ar.pfs 158 // r12 = preserved: memory stack 159 // r13 = preserved: thread pointer 160 // r14 = address of mask / mask value 161 // r15 = preserved: system call number 162 // r16 = preserved: current task pointer 163 // r17 = (not used) 164 // r18 = (not used) 165 // r19 = address of itc_lastcycle 166 // r20 = struct fsyscall_gtod_data (= address of gtod_lock.sequence) 167 // r21 = address of mmio_ptr 168 // r22 = address of wall_time or monotonic_time 169 // r23 = address of shift / value 170 // r24 = address mult factor / cycle_last value 171 // r25 = itc_lastcycle value 172 // r26 = address clocksource cycle_last 173 // r27 = (not used) 174 // r28 = sequence number at the beginning of critcal section 175 // r29 = address of itc_jitter 176 // r30 = time processing flags / memory address 177 // r31 = pointer to result 178 // Predicates 179 // p6,p7 short term use 180 // p8 = timesource ar.itc 181 // p9 = timesource mmio64 182 // p10 = timesource mmio32 - not used 183 // p11 = timesource not to be handled by asm code 184 // p12 = memory time source ( = p9 | p10) - not used 185 // p13 = do cmpxchg with itc_lastcycle 186 // p14 = Divide by 1000 187 // p15 = Add monotonic 188 // 189 // Note that instructions are optimized for McKinley. McKinley can 190 // process two bundles simultaneously and therefore we continuously 191 // try to feed the CPU two bundles and then a stop. 192 193 add r2 = TI_FLAGS+IA64_TASK_SIZE,r16 194 tnat.nz p6,p0 = r31 // guard against Nat argument 195(p6) br.cond.spnt.few .fail_einval 196 movl r20 = fsyscall_gtod_data // load fsyscall gettimeofday data address 197 ;; 198 ld4 r2 = [r2] // process work pending flags 199 movl r29 = itc_jitter_data // itc_jitter 200 add r22 = IA64_GTOD_WALL_TIME_OFFSET,r20 // wall_time 201 add r21 = IA64_CLKSRC_MMIO_OFFSET,r20 202 mov pr = r30,0xc000 // Set predicates according to function 203 ;; 204 and r2 = TIF_ALLWORK_MASK,r2 205 add r19 = IA64_ITC_LASTCYCLE_OFFSET,r29 206(p15) add r22 = IA64_GTOD_MONO_TIME_OFFSET,r20 // monotonic_time 207 ;; 208 add r26 = IA64_CLKSRC_CYCLE_LAST_OFFSET,r20 // clksrc_cycle_last 209 cmp.ne p6, p0 = 0, r2 // Fallback if work is scheduled 210(p6) br.cond.spnt.many fsys_fallback_syscall 211 ;; 212 // Begin critical section 213.time_redo: 214 ld4.acq r28 = [r20] // gtod_lock.sequence, Must take first 215 ;; 216 and r28 = ~1,r28 // And make sequence even to force retry if odd 217 ;; 218 ld8 r30 = [r21] // clocksource->mmio_ptr 219 add r24 = IA64_CLKSRC_MULT_OFFSET,r20 220 ld4 r2 = [r29] // itc_jitter value 221 add r23 = IA64_CLKSRC_SHIFT_OFFSET,r20 222 add r14 = IA64_CLKSRC_MASK_OFFSET,r20 223 ;; 224 ld4 r3 = [r24] // clocksource mult value 225 ld8 r14 = [r14] // clocksource mask value 226 cmp.eq p8,p9 = 0,r30 // use cpu timer if no mmio_ptr 227 ;; 228 setf.sig f7 = r3 // Setup for mult scaling of counter 229(p8) cmp.ne p13,p0 = r2,r0 // need itc_jitter compensation, set p13 230 ld4 r23 = [r23] // clocksource shift value 231 ld8 r24 = [r26] // get clksrc_cycle_last value 232(p9) cmp.eq p13,p0 = 0,r30 // if mmio_ptr, clear p13 jitter control 233 ;; 234 .pred.rel.mutex p8,p9 235 MOV_FROM_ITC(p8, p6, r2, r10) // CPU_TIMER. 36 clocks latency!!! 236(p9) ld8 r2 = [r30] // MMIO_TIMER. Could also have latency issues.. 237(p13) ld8 r25 = [r19] // get itc_lastcycle value 238 ld8 r9 = [r22],IA64_TIMESPEC_TV_NSEC_OFFSET // tv_sec 239 ;; 240 ld8 r8 = [r22],-IA64_TIMESPEC_TV_NSEC_OFFSET // tv_nsec 241(p13) sub r3 = r25,r2 // Diff needed before comparison (thanks davidm) 242 ;; 243(p13) cmp.gt.unc p6,p7 = r3,r0 // check if it is less than last. p6,p7 cleared 244 sub r10 = r2,r24 // current_cycle - last_cycle 245 ;; 246(p6) sub r10 = r25,r24 // time we got was less than last_cycle 247(p7) mov ar.ccv = r25 // more than last_cycle. Prep for cmpxchg 248 ;; 249(p7) cmpxchg8.rel r3 = [r19],r2,ar.ccv 250 ;; 251(p7) cmp.ne p7,p0 = r25,r3 // if cmpxchg not successful 252 ;; 253(p7) sub r10 = r3,r24 // then use new last_cycle instead 254 ;; 255 and r10 = r10,r14 // Apply mask 256 ;; 257 setf.sig f8 = r10 258 nop.i 123 259 ;; 260 // fault check takes 5 cycles and we have spare time 261EX(.fail_efault, probe.w.fault r31, 3) 262 xmpy.l f8 = f8,f7 // nsec_per_cyc*(counter-last_counter) 263 ;; 264 getf.sig r2 = f8 265 mf 266 ;; 267 ld4 r10 = [r20] // gtod_lock.sequence 268 shr.u r2 = r2,r23 // shift by factor 269 ;; 270 add r8 = r8,r2 // Add xtime.nsecs 271 cmp4.ne p7,p0 = r28,r10 272(p7) br.cond.dpnt.few .time_redo // sequence number changed, redo 273 // End critical section. 274 // Now r8=tv->tv_nsec and r9=tv->tv_sec 275 mov r10 = r0 276 movl r2 = 1000000000 277 add r23 = IA64_TIMESPEC_TV_NSEC_OFFSET, r31 278(p14) movl r3 = 2361183241434822607 // Prep for / 1000 hack 279 ;; 280.time_normalize: 281 mov r21 = r8 282 cmp.ge p6,p0 = r8,r2 283(p14) shr.u r20 = r8, 3 // We can repeat this if necessary just wasting time 284 ;; 285(p14) setf.sig f8 = r20 286(p6) sub r8 = r8,r2 287(p6) add r9 = 1,r9 // two nops before the branch. 288(p14) setf.sig f7 = r3 // Chances for repeats are 1 in 10000 for gettod 289(p6) br.cond.dpnt.few .time_normalize 290 ;; 291 // Divided by 8 though shift. Now divide by 125 292 // The compiler was able to do that with a multiply 293 // and a shift and we do the same 294EX(.fail_efault, probe.w.fault r23, 3) // This also costs 5 cycles 295(p14) xmpy.hu f8 = f8, f7 // xmpy has 5 cycles latency so use it 296 ;; 297(p14) getf.sig r2 = f8 298 ;; 299 mov r8 = r0 300(p14) shr.u r21 = r2, 4 301 ;; 302EX(.fail_efault, st8 [r31] = r9) 303EX(.fail_efault, st8 [r23] = r21) 304 FSYS_RETURN 305.fail_einval: 306 mov r8 = EINVAL 307 mov r10 = -1 308 FSYS_RETURN 309.fail_efault: 310 mov r8 = EFAULT 311 mov r10 = -1 312 FSYS_RETURN 313END(fsys_gettimeofday) 314 315ENTRY(fsys_clock_gettime) 316 .prologue 317 .altrp b6 318 .body 319 cmp4.ltu p6, p0 = CLOCK_MONOTONIC, r32 320 // Fallback if this is not CLOCK_REALTIME or CLOCK_MONOTONIC 321(p6) br.spnt.few fsys_fallback_syscall 322 mov r31 = r33 323 shl r30 = r32,15 324 br.many .gettime 325END(fsys_clock_gettime) 326 327/* 328 * fsys_getcpu doesn't use the third parameter in this implementation. It reads 329 * current_thread_info()->cpu and corresponding node in cpu_to_node_map. 330 */ 331ENTRY(fsys_getcpu) 332 .prologue 333 .altrp b6 334 .body 335 ;; 336 add r2=TI_FLAGS+IA64_TASK_SIZE,r16 337 tnat.nz p6,p0 = r32 // guard against NaT argument 338 add r3=TI_CPU+IA64_TASK_SIZE,r16 339 ;; 340 ld4 r3=[r3] // M r3 = thread_info->cpu 341 ld4 r2=[r2] // M r2 = thread_info->flags 342(p6) br.cond.spnt.few .fail_einval // B 343 ;; 344 tnat.nz p7,p0 = r33 // I guard against NaT argument 345(p7) br.cond.spnt.few .fail_einval // B 346 ;; 347 cmp.ne p6,p0=r32,r0 348 cmp.ne p7,p0=r33,r0 349 ;; 350#ifdef CONFIG_NUMA 351 movl r17=cpu_to_node_map 352 ;; 353EX(.fail_efault, (p6) probe.w.fault r32, 3) // M This takes 5 cycles 354EX(.fail_efault, (p7) probe.w.fault r33, 3) // M This takes 5 cycles 355 shladd r18=r3,1,r17 356 ;; 357 ld2 r20=[r18] // r20 = cpu_to_node_map[cpu] 358 and r2 = TIF_ALLWORK_MASK,r2 359 ;; 360 cmp.ne p8,p0=0,r2 361(p8) br.spnt.many fsys_fallback_syscall 362 ;; 363 ;; 364EX(.fail_efault, (p6) st4 [r32] = r3) 365EX(.fail_efault, (p7) st2 [r33] = r20) 366 mov r8=0 367 ;; 368#else 369EX(.fail_efault, (p6) probe.w.fault r32, 3) // M This takes 5 cycles 370EX(.fail_efault, (p7) probe.w.fault r33, 3) // M This takes 5 cycles 371 and r2 = TIF_ALLWORK_MASK,r2 372 ;; 373 cmp.ne p8,p0=0,r2 374(p8) br.spnt.many fsys_fallback_syscall 375 ;; 376EX(.fail_efault, (p6) st4 [r32] = r3) 377EX(.fail_efault, (p7) st2 [r33] = r0) 378 mov r8=0 379 ;; 380#endif 381 FSYS_RETURN 382END(fsys_getcpu) 383 384ENTRY(fsys_fallback_syscall) 385 .prologue 386 .altrp b6 387 .body 388 /* 389 * We only get here from light-weight syscall handlers. Thus, we already 390 * know that r15 contains a valid syscall number. No need to re-check. 391 */ 392 adds r17=-1024,r15 393 movl r14=sys_call_table 394 ;; 395 RSM_PSR_I(p0, r26, r27) 396 shladd r18=r17,3,r14 397 ;; 398 ld8 r18=[r18] // load normal (heavy-weight) syscall entry-point 399 MOV_FROM_PSR(p0, r29, r26) // read psr (12 cyc load latency) 400 mov r27=ar.rsc 401 mov r21=ar.fpsr 402 mov r26=ar.pfs 403END(fsys_fallback_syscall) 404 /* FALL THROUGH */ 405GLOBAL_ENTRY(fsys_bubble_down) 406 .prologue 407 .altrp b6 408 .body 409 /* 410 * We get here for syscalls that don't have a lightweight 411 * handler. For those, we need to bubble down into the kernel 412 * and that requires setting up a minimal pt_regs structure, 413 * and initializing the CPU state more or less as if an 414 * interruption had occurred. To make syscall-restarts work, 415 * we setup pt_regs such that cr_iip points to the second 416 * instruction in syscall_via_break. Decrementing the IP 417 * hence will restart the syscall via break and not 418 * decrementing IP will return us to the caller, as usual. 419 * Note that we preserve the value of psr.pp rather than 420 * initializing it from dcr.pp. This makes it possible to 421 * distinguish fsyscall execution from other privileged 422 * execution. 423 * 424 * On entry: 425 * - normal fsyscall handler register usage, except 426 * that we also have: 427 * - r18: address of syscall entry point 428 * - r21: ar.fpsr 429 * - r26: ar.pfs 430 * - r27: ar.rsc 431 * - r29: psr 432 * 433 * We used to clear some PSR bits here but that requires slow 434 * serialization. Fortuntely, that isn't really necessary. 435 * The rationale is as follows: we used to clear bits 436 * ~PSR_PRESERVED_BITS in PSR.L. Since 437 * PSR_PRESERVED_BITS==PSR.{UP,MFL,MFH,PK,DT,PP,SP,RT,IC}, we 438 * ended up clearing PSR.{BE,AC,I,DFL,DFH,DI,DB,SI,TB}. 439 * However, 440 * 441 * PSR.BE : already is turned off in __kernel_syscall_via_epc() 442 * PSR.AC : don't care (kernel normally turns PSR.AC on) 443 * PSR.I : already turned off by the time fsys_bubble_down gets 444 * invoked 445 * PSR.DFL: always 0 (kernel never turns it on) 446 * PSR.DFH: don't care --- kernel never touches f32-f127 on its own 447 * initiative 448 * PSR.DI : always 0 (kernel never turns it on) 449 * PSR.SI : always 0 (kernel never turns it on) 450 * PSR.DB : don't care --- kernel never enables kernel-level 451 * breakpoints 452 * PSR.TB : must be 0 already; if it wasn't zero on entry to 453 * __kernel_syscall_via_epc, the branch to fsys_bubble_down 454 * will trigger a taken branch; the taken-trap-handler then 455 * converts the syscall into a break-based system-call. 456 */ 457 /* 458 * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc. 459 * The rest we have to synthesize. 460 */ 461# define PSR_ONE_BITS ((3 << IA64_PSR_CPL0_BIT) \ 462 | (0x1 << IA64_PSR_RI_BIT) \ 463 | IA64_PSR_BN | IA64_PSR_I) 464 465 invala // M0|1 466 movl r14=ia64_ret_from_syscall // X 467 468 nop.m 0 469 movl r28=__kernel_syscall_via_break // X create cr.iip 470 ;; 471 472 mov r2=r16 // A get task addr to addl-addressable register 473 adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 // A 474 mov r31=pr // I0 save pr (2 cyc) 475 ;; 476 st1 [r16]=r0 // M2|3 clear current->thread.on_ustack flag 477 addl r22=IA64_RBS_OFFSET,r2 // A compute base of RBS 478 add r3=TI_FLAGS+IA64_TASK_SIZE,r2 // A 479 ;; 480 ld4 r3=[r3] // M0|1 r3 = current_thread_info()->flags 481 lfetch.fault.excl.nt1 [r22] // M0|1 prefetch register backing-store 482 nop.i 0 483 ;; 484 mov ar.rsc=0 // M2 set enforced lazy mode, pl 0, LE, loadrs=0 485#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE 486 MOV_FROM_ITC(p0, p6, r30, r23) // M get cycle for accounting 487#else 488 nop.m 0 489#endif 490 nop.i 0 491 ;; 492 mov r23=ar.bspstore // M2 (12 cyc) save ar.bspstore 493 mov.m r24=ar.rnat // M2 (5 cyc) read ar.rnat (dual-issues!) 494 nop.i 0 495 ;; 496 mov ar.bspstore=r22 // M2 (6 cyc) switch to kernel RBS 497 movl r8=PSR_ONE_BITS // X 498 ;; 499 mov r25=ar.unat // M2 (5 cyc) save ar.unat 500 mov r19=b6 // I0 save b6 (2 cyc) 501 mov r20=r1 // A save caller's gp in r20 502 ;; 503 or r29=r8,r29 // A construct cr.ipsr value to save 504 mov b6=r18 // I0 copy syscall entry-point to b6 (7 cyc) 505 addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 // A compute base of memory stack 506 507 mov r18=ar.bsp // M2 save (kernel) ar.bsp (12 cyc) 508 cmp.ne pKStk,pUStk=r0,r0 // A set pKStk <- 0, pUStk <- 1 509 br.call.sptk.many b7=ia64_syscall_setup // B 510 ;; 511#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE 512 // mov.m r30=ar.itc is called in advance 513 add r16=TI_AC_STAMP+IA64_TASK_SIZE,r2 514 add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r2 515 ;; 516 ld8 r18=[r16],TI_AC_STIME-TI_AC_STAMP // time at last check in kernel 517 ld8 r19=[r17],TI_AC_UTIME-TI_AC_LEAVE // time at leave kernel 518 ;; 519 ld8 r20=[r16],TI_AC_STAMP-TI_AC_STIME // cumulated stime 520 ld8 r21=[r17] // cumulated utime 521 sub r22=r19,r18 // stime before leave kernel 522 ;; 523 st8 [r16]=r30,TI_AC_STIME-TI_AC_STAMP // update stamp 524 sub r18=r30,r19 // elapsed time in user mode 525 ;; 526 add r20=r20,r22 // sum stime 527 add r21=r21,r18 // sum utime 528 ;; 529 st8 [r16]=r20 // update stime 530 st8 [r17]=r21 // update utime 531 ;; 532#endif 533 mov ar.rsc=0x3 // M2 set eager mode, pl 0, LE, loadrs=0 534 mov rp=r14 // I0 set the real return addr 535 and r3=_TIF_SYSCALL_TRACEAUDIT,r3 // A 536 ;; 537 SSM_PSR_I(p0, p6, r22) // M2 we're on kernel stacks now, reenable irqs 538 cmp.eq p8,p0=r3,r0 // A 539(p10) br.cond.spnt.many ia64_ret_from_syscall // B return if bad call-frame or r15 is a NaT 540 541 nop.m 0 542(p8) br.call.sptk.many b6=b6 // B (ignore return address) 543 br.cond.spnt ia64_trace_syscall // B 544END(fsys_bubble_down) 545 546 .rodata 547 .align 8 548 .globl fsyscall_table 549 550 data8 fsys_bubble_down 551fsyscall_table: 552 data8 fsys_ni_syscall 553 data8 0 // exit // 1025 554 data8 0 // read 555 data8 0 // write 556 data8 0 // open 557 data8 0 // close 558 data8 0 // creat // 1030 559 data8 0 // link 560 data8 0 // unlink 561 data8 0 // execve 562 data8 0 // chdir 563 data8 0 // fchdir // 1035 564 data8 0 // utimes 565 data8 0 // mknod 566 data8 0 // chmod 567 data8 0 // chown 568 data8 0 // lseek // 1040 569 data8 fsys_getpid // getpid 570 data8 0 // getppid 571 data8 0 // mount 572 data8 0 // umount 573 data8 0 // setuid // 1045 574 data8 0 // getuid 575 data8 0 // geteuid 576 data8 0 // ptrace 577 data8 0 // access 578 data8 0 // sync // 1050 579 data8 0 // fsync 580 data8 0 // fdatasync 581 data8 0 // kill 582 data8 0 // rename 583 data8 0 // mkdir // 1055 584 data8 0 // rmdir 585 data8 0 // dup 586 data8 0 // pipe 587 data8 0 // times 588 data8 0 // brk // 1060 589 data8 0 // setgid 590 data8 0 // getgid 591 data8 0 // getegid 592 data8 0 // acct 593 data8 0 // ioctl // 1065 594 data8 0 // fcntl 595 data8 0 // umask 596 data8 0 // chroot 597 data8 0 // ustat 598 data8 0 // dup2 // 1070 599 data8 0 // setreuid 600 data8 0 // setregid 601 data8 0 // getresuid 602 data8 0 // setresuid 603 data8 0 // getresgid // 1075 604 data8 0 // setresgid 605 data8 0 // getgroups 606 data8 0 // setgroups 607 data8 0 // getpgid 608 data8 0 // setpgid // 1080 609 data8 0 // setsid 610 data8 0 // getsid 611 data8 0 // sethostname 612 data8 0 // setrlimit 613 data8 0 // getrlimit // 1085 614 data8 0 // getrusage 615 data8 fsys_gettimeofday // gettimeofday 616 data8 0 // settimeofday 617 data8 0 // select 618 data8 0 // poll // 1090 619 data8 0 // symlink 620 data8 0 // readlink 621 data8 0 // uselib 622 data8 0 // swapon 623 data8 0 // swapoff // 1095 624 data8 0 // reboot 625 data8 0 // truncate 626 data8 0 // ftruncate 627 data8 0 // fchmod 628 data8 0 // fchown // 1100 629 data8 0 // getpriority 630 data8 0 // setpriority 631 data8 0 // statfs 632 data8 0 // fstatfs 633 data8 0 // gettid // 1105 634 data8 0 // semget 635 data8 0 // semop 636 data8 0 // semctl 637 data8 0 // msgget 638 data8 0 // msgsnd // 1110 639 data8 0 // msgrcv 640 data8 0 // msgctl 641 data8 0 // shmget 642 data8 0 // shmat 643 data8 0 // shmdt // 1115 644 data8 0 // shmctl 645 data8 0 // syslog 646 data8 0 // setitimer 647 data8 0 // getitimer 648 data8 0 // 1120 649 data8 0 650 data8 0 651 data8 0 // vhangup 652 data8 0 // lchown 653 data8 0 // remap_file_pages // 1125 654 data8 0 // wait4 655 data8 0 // sysinfo 656 data8 0 // clone 657 data8 0 // setdomainname 658 data8 0 // newuname // 1130 659 data8 0 // adjtimex 660 data8 0 661 data8 0 // init_module 662 data8 0 // delete_module 663 data8 0 // 1135 664 data8 0 665 data8 0 // quotactl 666 data8 0 // bdflush 667 data8 0 // sysfs 668 data8 0 // personality // 1140 669 data8 0 // afs_syscall 670 data8 0 // setfsuid 671 data8 0 // setfsgid 672 data8 0 // getdents 673 data8 0 // flock // 1145 674 data8 0 // readv 675 data8 0 // writev 676 data8 0 // pread64 677 data8 0 // pwrite64 678 data8 0 // sysctl // 1150 679 data8 0 // mmap 680 data8 0 // munmap 681 data8 0 // mlock 682 data8 0 // mlockall 683 data8 0 // mprotect // 1155 684 data8 0 // mremap 685 data8 0 // msync 686 data8 0 // munlock 687 data8 0 // munlockall 688 data8 0 // sched_getparam // 1160 689 data8 0 // sched_setparam 690 data8 0 // sched_getscheduler 691 data8 0 // sched_setscheduler 692 data8 0 // sched_yield 693 data8 0 // sched_get_priority_max // 1165 694 data8 0 // sched_get_priority_min 695 data8 0 // sched_rr_get_interval 696 data8 0 // nanosleep 697 data8 0 // nfsservctl 698 data8 0 // prctl // 1170 699 data8 0 // getpagesize 700 data8 0 // mmap2 701 data8 0 // pciconfig_read 702 data8 0 // pciconfig_write 703 data8 0 // perfmonctl // 1175 704 data8 0 // sigaltstack 705 data8 0 // rt_sigaction 706 data8 0 // rt_sigpending 707 data8 0 // rt_sigprocmask 708 data8 0 // rt_sigqueueinfo // 1180 709 data8 0 // rt_sigreturn 710 data8 0 // rt_sigsuspend 711 data8 0 // rt_sigtimedwait 712 data8 0 // getcwd 713 data8 0 // capget // 1185 714 data8 0 // capset 715 data8 0 // sendfile 716 data8 0 717 data8 0 718 data8 0 // socket // 1190 719 data8 0 // bind 720 data8 0 // connect 721 data8 0 // listen 722 data8 0 // accept 723 data8 0 // getsockname // 1195 724 data8 0 // getpeername 725 data8 0 // socketpair 726 data8 0 // send 727 data8 0 // sendto 728 data8 0 // recv // 1200 729 data8 0 // recvfrom 730 data8 0 // shutdown 731 data8 0 // setsockopt 732 data8 0 // getsockopt 733 data8 0 // sendmsg // 1205 734 data8 0 // recvmsg 735 data8 0 // pivot_root 736 data8 0 // mincore 737 data8 0 // madvise 738 data8 0 // newstat // 1210 739 data8 0 // newlstat 740 data8 0 // newfstat 741 data8 0 // clone2 742 data8 0 // getdents64 743 data8 0 // getunwind // 1215 744 data8 0 // readahead 745 data8 0 // setxattr 746 data8 0 // lsetxattr 747 data8 0 // fsetxattr 748 data8 0 // getxattr // 1220 749 data8 0 // lgetxattr 750 data8 0 // fgetxattr 751 data8 0 // listxattr 752 data8 0 // llistxattr 753 data8 0 // flistxattr // 1225 754 data8 0 // removexattr 755 data8 0 // lremovexattr 756 data8 0 // fremovexattr 757 data8 0 // tkill 758 data8 0 // futex // 1230 759 data8 0 // sched_setaffinity 760 data8 0 // sched_getaffinity 761 data8 fsys_set_tid_address // set_tid_address 762 data8 0 // fadvise64_64 763 data8 0 // tgkill // 1235 764 data8 0 // exit_group 765 data8 0 // lookup_dcookie 766 data8 0 // io_setup 767 data8 0 // io_destroy 768 data8 0 // io_getevents // 1240 769 data8 0 // io_submit 770 data8 0 // io_cancel 771 data8 0 // epoll_create 772 data8 0 // epoll_ctl 773 data8 0 // epoll_wait // 1245 774 data8 0 // restart_syscall 775 data8 0 // semtimedop 776 data8 0 // timer_create 777 data8 0 // timer_settime 778 data8 0 // timer_gettime // 1250 779 data8 0 // timer_getoverrun 780 data8 0 // timer_delete 781 data8 0 // clock_settime 782 data8 fsys_clock_gettime // clock_gettime 783 data8 0 // clock_getres // 1255 784 data8 0 // clock_nanosleep 785 data8 0 // fstatfs64 786 data8 0 // statfs64 787 data8 0 // mbind 788 data8 0 // get_mempolicy // 1260 789 data8 0 // set_mempolicy 790 data8 0 // mq_open 791 data8 0 // mq_unlink 792 data8 0 // mq_timedsend 793 data8 0 // mq_timedreceive // 1265 794 data8 0 // mq_notify 795 data8 0 // mq_getsetattr 796 data8 0 // kexec_load 797 data8 0 // vserver 798 data8 0 // waitid // 1270 799 data8 0 // add_key 800 data8 0 // request_key 801 data8 0 // keyctl 802 data8 0 // ioprio_set 803 data8 0 // ioprio_get // 1275 804 data8 0 // move_pages 805 data8 0 // inotify_init 806 data8 0 // inotify_add_watch 807 data8 0 // inotify_rm_watch 808 data8 0 // migrate_pages // 1280 809 data8 0 // openat 810 data8 0 // mkdirat 811 data8 0 // mknodat 812 data8 0 // fchownat 813 data8 0 // futimesat // 1285 814 data8 0 // newfstatat 815 data8 0 // unlinkat 816 data8 0 // renameat 817 data8 0 // linkat 818 data8 0 // symlinkat // 1290 819 data8 0 // readlinkat 820 data8 0 // fchmodat 821 data8 0 // faccessat 822 data8 0 823 data8 0 // 1295 824 data8 0 // unshare 825 data8 0 // splice 826 data8 0 // set_robust_list 827 data8 0 // get_robust_list 828 data8 0 // sync_file_range // 1300 829 data8 0 // tee 830 data8 0 // vmsplice 831 data8 0 832 data8 fsys_getcpu // getcpu // 1304 833 834 // fill in zeros for the remaining entries 835 .zero: 836 .space fsyscall_table + 8*NR_syscalls - .zero, 0 837