1/*
2 * Support for HP iPAQ hx4700 PDAs.
3 *
4 * Copyright (c) 2008-2009 Philipp Zabel
5 *
6 * Based on code:
7 *    Copyright (c) 2004 Hewlett-Packard Company.
8 *    Copyright (c) 2005 SDG Systems, LLC
9 *    Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 *
15 */
16
17#include <linux/kernel.h>
18#include <linux/init.h>
19#include <linux/platform_device.h>
20#include <linux/delay.h>
21#include <linux/fb.h>
22#include <linux/gpio.h>
23#include <linux/gpio_keys.h>
24#include <linux/input.h>
25#include <linux/input/navpoint.h>
26#include <linux/lcd.h>
27#include <linux/mfd/htc-egpio.h>
28#include <linux/mfd/asic3.h>
29#include <linux/mtd/physmap.h>
30#include <linux/pda_power.h>
31#include <linux/pwm.h>
32#include <linux/pwm_backlight.h>
33#include <linux/regulator/driver.h>
34#include <linux/regulator/gpio-regulator.h>
35#include <linux/regulator/machine.h>
36#include <linux/regulator/max1586.h>
37#include <linux/spi/ads7846.h>
38#include <linux/spi/spi.h>
39#include <linux/spi/pxa2xx_spi.h>
40#include <linux/usb/gpio_vbus.h>
41#include <linux/i2c/pxa-i2c.h>
42
43#include <mach/hardware.h>
44#include <asm/mach-types.h>
45#include <asm/mach/arch.h>
46
47#include <mach/pxa27x.h>
48#include <mach/hx4700.h>
49#include <linux/platform_data/irda-pxaficp.h>
50
51#include <sound/ak4641.h>
52#include <video/platform_lcd.h>
53#include <video/w100fb.h>
54
55#include "devices.h"
56#include "generic.h"
57
58/* Physical address space information */
59
60#define ATI_W3220_PHYS  PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
61#define ASIC3_PHYS      PXA_CS3_PHYS
62#define ASIC3_SD_PHYS   (PXA_CS3_PHYS + 0x02000000)
63
64static unsigned long hx4700_pin_config[] __initdata = {
65
66	/* SDRAM and Static Memory I/O Signals */
67	GPIO20_nSDCS_2,
68	GPIO21_nSDCS_3,
69	GPIO15_nCS_1,
70	GPIO78_nCS_2,   /* W3220 */
71	GPIO79_nCS_3,   /* ASIC3 */
72	GPIO80_nCS_4,
73	GPIO33_nCS_5,	/* EGPIO, WLAN */
74
75	/* PC CARD */
76	GPIO48_nPOE,
77	GPIO49_nPWE,
78	GPIO50_nPIOR,
79	GPIO51_nPIOW,
80	GPIO54_nPCE_2,
81	GPIO55_nPREG,
82	GPIO56_nPWAIT,
83	GPIO57_nIOIS16,
84	GPIO85_nPCE_1,
85	GPIO104_PSKTSEL,
86
87	/* I2C */
88	GPIO117_I2C_SCL,
89	GPIO118_I2C_SDA,
90
91	/* FFUART (RS-232) */
92	GPIO34_FFUART_RXD,
93	GPIO35_FFUART_CTS,
94	GPIO36_FFUART_DCD,
95	GPIO37_FFUART_DSR,
96	GPIO38_FFUART_RI,
97	GPIO39_FFUART_TXD,
98	GPIO40_FFUART_DTR,
99	GPIO41_FFUART_RTS,
100
101	/* BTUART */
102	GPIO42_BTUART_RXD,
103	GPIO43_BTUART_TXD_LPM_LOW,
104	GPIO44_BTUART_CTS,
105	GPIO45_BTUART_RTS_LPM_LOW,
106
107	/* STUART (IRDA) */
108	GPIO46_STUART_RXD,
109	GPIO47_STUART_TXD,
110
111	/* PWM 1 (Backlight) */
112	GPIO17_PWM1_OUT,
113
114	/* I2S */
115	GPIO28_I2S_BITCLK_OUT,
116	GPIO29_I2S_SDATA_IN,
117	GPIO30_I2S_SDATA_OUT,
118	GPIO31_I2S_SYNC,
119	GPIO113_I2S_SYSCLK,
120
121	/* SSP 1 (NavPoint) */
122	GPIO23_SSP1_SCLK_IN,
123	GPIO24_SSP1_SFRM,
124	GPIO25_SSP1_TXD,
125	GPIO26_SSP1_RXD,
126
127	/* SSP 2 (TSC2046) */
128	GPIO19_SSP2_SCLK,
129	GPIO86_SSP2_RXD,
130	GPIO87_SSP2_TXD,
131	GPIO88_GPIO | MFP_LPM_DRIVE_HIGH,	/* TSC2046_CS */
132
133	/* BQ24022 Regulator */
134	GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_nCHARGE_EN */
135	GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_ISET2 */
136
137	/* HX4700 specific input GPIOs */
138	GPIO12_GPIO | WAKEUP_ON_EDGE_RISE,	/* ASIC3_IRQ */
139	GPIO13_GPIO,	/* W3220_IRQ */
140	GPIO14_GPIO,	/* nWLAN_IRQ */
141
142	/* HX4700 specific output GPIOs */
143	GPIO61_GPIO | MFP_LPM_DRIVE_HIGH,	/* W3220_nRESET */
144	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* ASIC3_nRESET */
145	GPIO81_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_GP_nRESET */
146	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_HW_nRESET */
147	GPIO102_GPIO | MFP_LPM_DRIVE_LOW,	/* SYNAPTICS_POWER_ON */
148
149	GPIO10_GPIO,	/* GSM_IRQ */
150	GPIO13_GPIO,	/* CPLD_IRQ */
151	GPIO107_GPIO,	/* DS1WM_IRQ */
152	GPIO108_GPIO,	/* GSM_READY */
153	GPIO58_GPIO,	/* TSC2046_nPENIRQ */
154	GPIO66_GPIO,	/* nSDIO_IRQ */
155};
156
157/*
158 * IRDA
159 */
160
161static struct pxaficp_platform_data ficp_info = {
162	.gpio_pwdown		= GPIO105_HX4700_nIR_ON,
163	.transceiver_cap	= IR_SIRMODE | IR_OFF,
164};
165
166/*
167 * GPIO Keys
168 */
169
170#define INIT_KEY(_code, _gpio, _active_low, _desc)	\
171	{						\
172		.code       = KEY_##_code,		\
173		.gpio       = _gpio,			\
174		.active_low = _active_low,		\
175		.desc       = _desc,			\
176		.type       = EV_KEY,			\
177		.wakeup     = 1,			\
178	}
179
180static struct gpio_keys_button gpio_keys_buttons[] = {
181	INIT_KEY(POWER,       GPIO0_HX4700_nKEY_POWER,   1, "Power button"),
182	INIT_KEY(MAIL,        GPIO94_HX4700_KEY_MAIL,    0, "Mail button"),
183	INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
184	INIT_KEY(RECORD,      GPIOD6_nKEY_RECORD,        1, "Record button"),
185	INIT_KEY(CALENDAR,    GPIOD1_nKEY_CALENDAR,      1, "Calendar button"),
186	INIT_KEY(HOMEPAGE,    GPIOD3_nKEY_HOME,          1, "Home button"),
187};
188
189static struct gpio_keys_platform_data gpio_keys_data = {
190	.buttons = gpio_keys_buttons,
191	.nbuttons = ARRAY_SIZE(gpio_keys_buttons),
192};
193
194static struct platform_device gpio_keys = {
195	.name = "gpio-keys",
196	.dev  = {
197		.platform_data = &gpio_keys_data,
198	},
199	.id   = -1,
200};
201
202/*
203 * Synaptics NavPoint connected to SSP1
204 */
205
206static struct navpoint_platform_data navpoint_platform_data = {
207	.port	= 1,
208	.gpio	= GPIO102_HX4700_SYNAPTICS_POWER_ON,
209};
210
211static struct platform_device navpoint = {
212	.name	= "navpoint",
213	.id	= -1,
214	.dev = {
215		.platform_data = &navpoint_platform_data,
216	},
217};
218
219/*
220 * ASIC3
221 */
222
223static u16 asic3_gpio_config[] = {
224	/* ASIC3 GPIO banks A and B along with some of C and D
225	   implement the buffering for the CF slot. */
226	ASIC3_CONFIG_GPIO(0, 1, 1, 0),
227	ASIC3_CONFIG_GPIO(1, 1, 1, 0),
228	ASIC3_CONFIG_GPIO(2, 1, 1, 0),
229	ASIC3_CONFIG_GPIO(3, 1, 1, 0),
230	ASIC3_CONFIG_GPIO(4, 1, 1, 0),
231	ASIC3_CONFIG_GPIO(5, 1, 1, 0),
232	ASIC3_CONFIG_GPIO(6, 1, 1, 0),
233	ASIC3_CONFIG_GPIO(7, 1, 1, 0),
234	ASIC3_CONFIG_GPIO(8, 1, 1, 0),
235	ASIC3_CONFIG_GPIO(9, 1, 1, 0),
236	ASIC3_CONFIG_GPIO(10, 1, 1, 0),
237	ASIC3_CONFIG_GPIO(11, 1, 1, 0),
238	ASIC3_CONFIG_GPIO(12, 1, 1, 0),
239	ASIC3_CONFIG_GPIO(13, 1, 1, 0),
240	ASIC3_CONFIG_GPIO(14, 1, 1, 0),
241	ASIC3_CONFIG_GPIO(15, 1, 1, 0),
242
243	ASIC3_CONFIG_GPIO(16, 1, 1, 0),
244	ASIC3_CONFIG_GPIO(17, 1, 1, 0),
245	ASIC3_CONFIG_GPIO(18, 1, 1, 0),
246	ASIC3_CONFIG_GPIO(19, 1, 1, 0),
247	ASIC3_CONFIG_GPIO(20, 1, 1, 0),
248	ASIC3_CONFIG_GPIO(21, 1, 1, 0),
249	ASIC3_CONFIG_GPIO(22, 1, 1, 0),
250	ASIC3_CONFIG_GPIO(23, 1, 1, 0),
251	ASIC3_CONFIG_GPIO(24, 1, 1, 0),
252	ASIC3_CONFIG_GPIO(25, 1, 1, 0),
253	ASIC3_CONFIG_GPIO(26, 1, 1, 0),
254	ASIC3_CONFIG_GPIO(27, 1, 1, 0),
255	ASIC3_CONFIG_GPIO(28, 1, 1, 0),
256	ASIC3_CONFIG_GPIO(29, 1, 1, 0),
257	ASIC3_CONFIG_GPIO(30, 1, 1, 0),
258	ASIC3_CONFIG_GPIO(31, 1, 1, 0),
259
260	/* GPIOC - CF, LEDs, SD */
261	ASIC3_GPIOC0_LED0,		/* red */
262	ASIC3_GPIOC1_LED1,		/* green */
263	ASIC3_GPIOC2_LED2,		/* blue */
264	ASIC3_GPIOC5_nCIOW,
265	ASIC3_GPIOC6_nCIOR,
266	ASIC3_GPIOC7_nPCE_1,
267	ASIC3_GPIOC8_nPCE_2,
268	ASIC3_GPIOC9_nPOE,
269	ASIC3_GPIOC10_nPWE,
270	ASIC3_GPIOC11_PSKTSEL,
271	ASIC3_GPIOC12_nPREG,
272	ASIC3_GPIOC13_nPWAIT,
273	ASIC3_GPIOC14_nPIOIS16,
274	ASIC3_GPIOC15_nPIOR,
275
276	/* GPIOD: input GPIOs, CF */
277	ASIC3_GPIOD4_CF_nCD,
278	ASIC3_GPIOD11_nCIOIS16,
279	ASIC3_GPIOD12_nCWAIT,
280	ASIC3_GPIOD15_nPIOW,
281};
282
283static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
284	[0] = {
285		.name = "hx4700:amber",
286		.default_trigger = "ds2760-battery.0-charging-blink-full-solid",
287	},
288	[1] = {
289		.name = "hx4700:green",
290		.default_trigger = "unused",
291	},
292	[2] = {
293		.name = "hx4700:blue",
294		.default_trigger = "hx4700-radio",
295	},
296};
297
298static struct resource asic3_resources[] = {
299	/* GPIO part */
300	[0] = DEFINE_RES_MEM(ASIC3_PHYS, ASIC3_MAP_SIZE_16BIT),
301	[1] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ)),
302	/* SD part */
303	[2] = DEFINE_RES_MEM(ASIC3_SD_PHYS, ASIC3_MAP_SIZE_16BIT),
304	[3] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ)),
305};
306
307static struct asic3_platform_data asic3_platform_data = {
308	.gpio_config     = asic3_gpio_config,
309	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
310	.irq_base        = IRQ_BOARD_START,
311	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
312	.clock_rate      = 4000000,
313	.leds            = asic3_leds,
314};
315
316static struct platform_device asic3 = {
317	.name          = "asic3",
318	.id            = -1,
319	.resource      = asic3_resources,
320	.num_resources = ARRAY_SIZE(asic3_resources),
321	.dev = {
322		.platform_data = &asic3_platform_data,
323	},
324};
325
326/*
327 * EGPIO
328 */
329
330static struct resource egpio_resources[] = {
331	[0] = DEFINE_RES_MEM(PXA_CS5_PHYS, 0x4),
332};
333
334static struct htc_egpio_chip egpio_chips[] = {
335	[0] = {
336		.reg_start = 0,
337		.gpio_base = HX4700_EGPIO_BASE,
338		.num_gpios = 8,
339		.direction = HTC_EGPIO_OUTPUT,
340	},
341};
342
343static struct htc_egpio_platform_data egpio_info = {
344	.reg_width = 16,
345	.bus_width = 16,
346	.chip      = egpio_chips,
347	.num_chips = ARRAY_SIZE(egpio_chips),
348};
349
350static struct platform_device egpio = {
351	.name          = "htc-egpio",
352	.id            = -1,
353	.resource      = egpio_resources,
354	.num_resources = ARRAY_SIZE(egpio_resources),
355	.dev = {
356		.platform_data = &egpio_info,
357	},
358};
359
360/*
361 * LCD - Sony display connected to ATI Imageon w3220
362 */
363
364static void sony_lcd_init(void)
365{
366	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
367	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
368	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
369	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
370	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
371	mdelay(10);
372	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
373	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
374	mdelay(20);
375
376	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
377	mdelay(5);
378	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
379
380	/* FIXME: init w3220 registers here */
381
382	mdelay(5);
383	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
384	mdelay(10);
385	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
386	mdelay(10);
387	gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
388	mdelay(10);
389	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
390}
391
392static void sony_lcd_off(void)
393{
394	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
395	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
396	mdelay(10);
397	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
398	mdelay(10);
399	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
400	mdelay(10);
401	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
402}
403
404#ifdef CONFIG_PM
405static void w3220_lcd_suspend(struct w100fb_par *wfb)
406{
407	sony_lcd_off();
408}
409
410static void w3220_lcd_resume(struct w100fb_par *wfb)
411{
412	sony_lcd_init();
413}
414#else
415#define w3220_lcd_resume	NULL
416#define w3220_lcd_suspend	NULL
417#endif
418
419static struct w100_tg_info w3220_tg_info = {
420	.suspend	= w3220_lcd_suspend,
421	.resume		= w3220_lcd_resume,
422};
423
424/*  				 W3220_VGA		QVGA */
425static struct w100_gen_regs w3220_regs = {
426	.lcd_format =        0x00000003,
427	.lcdd_cntl1 =        0x00000000,
428	.lcdd_cntl2 =        0x0003ffff,
429	.genlcd_cntl1 =      0x00abf003,	/* 0x00fff003 */
430	.genlcd_cntl2 =      0x00000003,
431	.genlcd_cntl3 =      0x000102aa,
432};
433
434static struct w100_mode w3220_modes[] = {
435{
436	.xres 		= 480,
437	.yres 		= 640,
438	.left_margin 	= 15,
439	.right_margin 	= 16,
440	.upper_margin 	= 8,
441	.lower_margin 	= 7,
442	.crtc_ss	= 0x00000000,
443	.crtc_ls	= 0xa1ff01f9,	/* 0x21ff01f9 */
444	.crtc_gs	= 0xc0000000,	/* 0x40000000 */
445	.crtc_vpos_gs	= 0x0000028f,
446	.crtc_ps1_active = 0x00000000,	/* 0x41060010 */
447	.crtc_rev	= 0,
448	.crtc_dclk	= 0x80000000,
449	.crtc_gclk	= 0x040a0104,
450	.crtc_goe	= 0,
451	.pll_freq 	= 95,
452	.pixclk_divider = 4,
453	.pixclk_divider_rotated = 4,
454	.pixclk_src     = CLK_SRC_PLL,
455	.sysclk_divider = 0,
456	.sysclk_src     = CLK_SRC_PLL,
457},
458{
459	.xres 		= 240,
460	.yres 		= 320,
461	.left_margin 	= 9,
462	.right_margin 	= 8,
463	.upper_margin 	= 5,
464	.lower_margin 	= 4,
465	.crtc_ss	= 0x80150014,
466	.crtc_ls        = 0xa0fb00f7,
467	.crtc_gs	= 0xc0080007,
468	.crtc_vpos_gs	= 0x00080007,
469	.crtc_rev	= 0x0000000a,
470	.crtc_dclk	= 0x81700030,
471	.crtc_gclk	= 0x8015010f,
472	.crtc_goe	= 0x00000000,
473	.pll_freq 	= 95,
474	.pixclk_divider = 4,
475	.pixclk_divider_rotated = 4,
476	.pixclk_src     = CLK_SRC_PLL,
477	.sysclk_divider = 0,
478	.sysclk_src     = CLK_SRC_PLL,
479},
480};
481
482struct w100_mem_info w3220_mem_info = {
483	.ext_cntl        = 0x09640011,
484	.sdram_mode_reg  = 0x00600021,
485	.ext_timing_cntl = 0x1a001545,	/* 0x15001545 */
486	.io_cntl         = 0x7ddd7333,
487	.size            = 0x1fffff,
488};
489
490struct w100_bm_mem_info w3220_bm_mem_info = {
491	.ext_mem_bw = 0x50413e01,
492	.offset = 0,
493	.ext_timing_ctl = 0x00043f7f,
494	.ext_cntl = 0x00000010,
495	.mode_reg = 0x00250000,
496	.io_cntl = 0x0fff0000,
497	.config = 0x08301480,
498};
499
500static struct w100_gpio_regs w3220_gpio_info = {
501	.init_data1 = 0xdfe00100,	/* GPIO_DATA */
502	.gpio_dir1  = 0xffff0000,	/* GPIO_CNTL1 */
503	.gpio_oe1   = 0x00000000,	/* GPIO_CNTL2 */
504	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
505	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
506	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
507};
508
509static struct w100fb_mach_info w3220_info = {
510	.tg        = &w3220_tg_info,
511	.mem       = &w3220_mem_info,
512	.bm_mem    = &w3220_bm_mem_info,
513	.gpio      = &w3220_gpio_info,
514	.regs      = &w3220_regs,
515	.modelist  = w3220_modes,
516	.num_modes = 2,
517	.xtal_freq = 16000000,
518};
519
520static struct resource w3220_resources[] = {
521	[0] = DEFINE_RES_MEM(ATI_W3220_PHYS, SZ_16M),
522};
523
524static struct platform_device w3220 = {
525	.name	= "w100fb",
526	.id	= -1,
527	.dev	= {
528		.platform_data = &w3220_info,
529	},
530	.num_resources = ARRAY_SIZE(w3220_resources),
531	.resource      = w3220_resources,
532};
533
534static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
535{
536	if (power)
537		sony_lcd_init();
538	else
539		sony_lcd_off();
540}
541
542static struct plat_lcd_data hx4700_lcd_data = {
543	.set_power = hx4700_lcd_set_power,
544};
545
546static struct platform_device hx4700_lcd = {
547	.name = "platform-lcd",
548	.id   = -1,
549	.dev  = {
550		.platform_data = &hx4700_lcd_data,
551		.parent        = &w3220.dev,
552	},
553};
554
555/*
556 * Backlight
557 */
558
559static struct platform_pwm_backlight_data backlight_data = {
560	.max_brightness = 200,
561	.dft_brightness = 100,
562	.enable_gpio    = -1,
563};
564
565static struct platform_device backlight = {
566	.name = "pwm-backlight",
567	.id   = -1,
568	.dev  = {
569		.parent        = &pxa27x_device_pwm1.dev,
570		.platform_data = &backlight_data,
571	},
572};
573
574static struct pwm_lookup hx4700_pwm_lookup[] = {
575	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL,
576		   30923, PWM_POLARITY_NORMAL),
577};
578
579/*
580 * USB "Transceiver"
581 */
582
583static struct gpio_vbus_mach_info gpio_vbus_info = {
584	.gpio_pullup        = GPIO76_HX4700_USBC_PUEN,
585	.gpio_vbus          = GPIOD14_nUSBC_DETECT,
586	.gpio_vbus_inverted = 1,
587};
588
589static struct platform_device gpio_vbus = {
590	.name          = "gpio-vbus",
591	.id            = -1,
592	.dev = {
593		.platform_data = &gpio_vbus_info,
594	},
595};
596
597/*
598 * Touchscreen - TSC2046 connected to SSP2
599 */
600
601static const struct ads7846_platform_data tsc2046_info = {
602	.model            = 7846,
603	.vref_delay_usecs = 100,
604	.pressure_max     = 1024,
605	.debounce_max     = 10,
606	.debounce_tol     = 3,
607	.debounce_rep     = 1,
608	.gpio_pendown     = GPIO58_HX4700_TSC2046_nPENIRQ,
609};
610
611static struct pxa2xx_spi_chip tsc2046_chip = {
612	.tx_threshold = 1,
613	.rx_threshold = 2,
614	.timeout      = 64,
615	.gpio_cs      = GPIO88_HX4700_TSC2046_CS,
616};
617
618static struct spi_board_info tsc2046_board_info[] __initdata = {
619	{
620		.modalias        = "ads7846",
621		.bus_num         = 2,
622		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
623		.irq             = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ),
624		.platform_data   = &tsc2046_info,
625		.controller_data = &tsc2046_chip,
626	},
627};
628
629static struct pxa2xx_spi_master pxa_ssp2_master_info = {
630	.num_chipselect = 1,
631	.enable_dma     = 1,
632};
633
634/*
635 * External power
636 */
637
638static int power_supply_init(struct device *dev)
639{
640	return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
641}
642
643static int hx4700_is_ac_online(void)
644{
645	return !gpio_get_value(GPIOD9_nAC_IN);
646}
647
648static void power_supply_exit(struct device *dev)
649{
650	gpio_free(GPIOD9_nAC_IN);
651}
652
653static char *hx4700_supplicants[] = {
654	"ds2760-battery.0", "backup-battery"
655};
656
657static struct pda_power_pdata power_supply_info = {
658	.init            = power_supply_init,
659	.is_ac_online    = hx4700_is_ac_online,
660	.exit            = power_supply_exit,
661	.supplied_to     = hx4700_supplicants,
662	.num_supplicants = ARRAY_SIZE(hx4700_supplicants),
663};
664
665static struct resource power_supply_resources[] = {
666	[0] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), 1, "ac",
667		IORESOURCE_IRQ |
668		IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
669	[1] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), 1, "usb",
670		IORESOURCE_IRQ |
671		IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
672};
673
674static struct platform_device power_supply = {
675	.name = "pda-power",
676	.id   = -1,
677	.dev  = {
678		.platform_data = &power_supply_info,
679	},
680	.resource      = power_supply_resources,
681	.num_resources = ARRAY_SIZE(power_supply_resources),
682};
683
684/*
685 * Battery charger
686 */
687
688static struct regulator_consumer_supply bq24022_consumers[] = {
689	REGULATOR_SUPPLY("vbus_draw", NULL),
690	REGULATOR_SUPPLY("ac_draw", NULL),
691};
692
693static struct regulator_init_data bq24022_init_data = {
694	.constraints = {
695		.max_uA         = 500000,
696		.valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
697	},
698	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
699	.consumer_supplies      = bq24022_consumers,
700};
701
702static struct gpio bq24022_gpios[] = {
703	{ GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
704};
705
706static struct gpio_regulator_state bq24022_states[] = {
707	{ .value = 100000, .gpios = (0 << 0) },
708	{ .value = 500000, .gpios = (1 << 0) },
709};
710
711static struct gpio_regulator_config bq24022_info = {
712	.supply_name = "bq24022",
713
714	.enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
715	.enable_high = 0,
716	.enabled_at_boot = 0,
717
718	.gpios = bq24022_gpios,
719	.nr_gpios = ARRAY_SIZE(bq24022_gpios),
720
721	.states = bq24022_states,
722	.nr_states = ARRAY_SIZE(bq24022_states),
723
724	.type = REGULATOR_CURRENT,
725	.init_data = &bq24022_init_data,
726};
727
728static struct platform_device bq24022 = {
729	.name = "gpio-regulator",
730	.id   = -1,
731	.dev  = {
732		.platform_data = &bq24022_info,
733	},
734};
735
736/*
737 * StrataFlash
738 */
739
740static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
741{
742	gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
743}
744
745static struct resource strataflash_resource[] = {
746	[0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M),
747	[1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M),
748};
749
750static struct physmap_flash_data strataflash_data = {
751	.width = 4,
752	.set_vpp = hx4700_set_vpp,
753};
754
755static struct platform_device strataflash = {
756	.name          = "physmap-flash",
757	.id            = -1,
758	.resource      = strataflash_resource,
759	.num_resources = ARRAY_SIZE(strataflash_resource),
760	.dev = {
761		.platform_data = &strataflash_data,
762	},
763};
764
765/*
766 * Maxim MAX1587A on PI2C
767 */
768
769static struct regulator_consumer_supply max1587a_consumer =
770	REGULATOR_SUPPLY("vcc_core", NULL);
771
772static struct regulator_init_data max1587a_v3_info = {
773	.constraints = {
774		.name = "vcc_core range",
775		.min_uV =  900000,
776		.max_uV = 1705000,
777		.always_on = 1,
778		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
779	},
780	.num_consumer_supplies = 1,
781	.consumer_supplies     = &max1587a_consumer,
782};
783
784static struct max1586_subdev_data max1587a_subdev = {
785	.name = "vcc_core",
786	.id   = MAX1586_V3,
787	.platform_data = &max1587a_v3_info,
788};
789
790static struct max1586_platform_data max1587a_info = {
791	.num_subdevs = 1,
792	.subdevs     = &max1587a_subdev,
793	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
794};
795
796static struct i2c_board_info __initdata pi2c_board_info[] = {
797	{
798		I2C_BOARD_INFO("max1586", 0x14),
799		.platform_data = &max1587a_info,
800	},
801};
802
803/*
804 * Asahi Kasei AK4641 on I2C
805 */
806
807static struct ak4641_platform_data ak4641_info = {
808	.gpio_power = GPIO27_HX4700_CODEC_ON,
809	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
810};
811
812static struct i2c_board_info i2c_board_info[] __initdata = {
813	{
814		I2C_BOARD_INFO("ak4641", 0x12),
815		.platform_data = &ak4641_info,
816	},
817};
818
819static struct platform_device audio = {
820	.name	= "hx4700-audio",
821	.id	= -1,
822};
823
824
825/*
826 * Platform devices
827 */
828
829static struct platform_device *devices[] __initdata = {
830	&asic3,
831	&gpio_keys,
832	&navpoint,
833	&backlight,
834	&w3220,
835	&hx4700_lcd,
836	&egpio,
837	&bq24022,
838	&gpio_vbus,
839	&power_supply,
840	&strataflash,
841	&audio,
842};
843
844static struct gpio global_gpios[] = {
845	{ GPIO12_HX4700_ASIC3_IRQ, GPIOF_IN, "ASIC3_IRQ" },
846	{ GPIO13_HX4700_W3220_IRQ, GPIOF_IN, "W3220_IRQ" },
847	{ GPIO14_HX4700_nWLAN_IRQ, GPIOF_IN, "WLAN_IRQ" },
848	{ GPIO59_HX4700_LCD_PC1,          GPIOF_OUT_INIT_HIGH, "LCD_PC1" },
849	{ GPIO62_HX4700_LCD_nRESET,       GPIOF_OUT_INIT_HIGH, "LCD_RESET" },
850	{ GPIO70_HX4700_LCD_SLIN1,        GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" },
851	{ GPIO84_HX4700_LCD_SQN,          GPIOF_OUT_INIT_HIGH, "LCD_SQN" },
852	{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
853	{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
854	{ GPIO32_HX4700_RS232_ON,         GPIOF_OUT_INIT_HIGH, "RS232_ON" },
855	{ GPIO61_HX4700_W3220_nRESET,     GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
856	{ GPIO71_HX4700_ASIC3_nRESET,     GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
857	{ GPIO81_HX4700_CPU_GP_nRESET,    GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
858	{ GPIO82_HX4700_EUART_RESET,      GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
859	{ GPIO116_HX4700_CPU_HW_nRESET,   GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
860};
861
862static void __init hx4700_init(void)
863{
864	int ret;
865
866	PCFR = PCFR_GPR_EN | PCFR_OPDE;
867
868	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
869	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
870	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
871	if (ret)
872		pr_err ("hx4700: Failed to request GPIOs.\n");
873
874	pxa_set_ffuart_info(NULL);
875	pxa_set_btuart_info(NULL);
876	pxa_set_stuart_info(NULL);
877
878	platform_add_devices(devices, ARRAY_SIZE(devices));
879	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
880
881	pxa_set_ficp_info(&ficp_info);
882	pxa27x_set_i2c_power_info(NULL);
883	pxa_set_i2c_info(NULL);
884	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
885	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
886	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
887	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
888
889	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
890	mdelay(10);
891	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
892	mdelay(10);
893
894	regulator_has_full_constraints();
895}
896
897MACHINE_START(H4700, "HP iPAQ HX4700")
898	.atag_offset  = 0x100,
899	.map_io       = pxa27x_map_io,
900	.nr_irqs      = HX4700_NR_IRQS,
901	.init_irq     = pxa27x_init_irq,
902	.handle_irq     = pxa27x_handle_irq,
903	.init_machine = hx4700_init,
904	.init_time	= pxa_timer_init,
905	.restart	= pxa_restart,
906MACHINE_END
907