1/* 2 * linux/arch/arm/kernel/entry-armv.S 3 * 4 * Copyright (C) 1996,1997,1998 Russell King. 5 * ARM700 fix by Matthew Godbolt (linux-user@willothewisp.demon.co.uk) 6 * nommu support by Hyok S. Choi (hyok.choi@samsung.com) 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 * Low-level vector interface routines 13 * 14 * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction 15 * that causes it to save wrong values... Be aware! 16 */ 17 18#include <linux/init.h> 19 20#include <asm/assembler.h> 21#include <asm/memory.h> 22#include <asm/glue-df.h> 23#include <asm/glue-pf.h> 24#include <asm/vfpmacros.h> 25#ifndef CONFIG_MULTI_IRQ_HANDLER 26#include <mach/entry-macro.S> 27#endif 28#include <asm/thread_notify.h> 29#include <asm/unwind.h> 30#include <asm/unistd.h> 31#include <asm/tls.h> 32#include <asm/system_info.h> 33 34#include "entry-header.S" 35#include <asm/entry-macro-multi.S> 36#include <asm/probes.h> 37 38/* 39 * Interrupt handling. 40 */ 41 .macro irq_handler 42#ifdef CONFIG_MULTI_IRQ_HANDLER 43 ldr r1, =handle_arch_irq 44 mov r0, sp 45 badr lr, 9997f 46 ldr pc, [r1] 47#else 48 arch_irq_handler_default 49#endif 509997: 51 .endm 52 53 .macro pabt_helper 54 @ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5 55#ifdef MULTI_PABORT 56 ldr ip, .LCprocfns 57 mov lr, pc 58 ldr pc, [ip, #PROCESSOR_PABT_FUNC] 59#else 60 bl CPU_PABORT_HANDLER 61#endif 62 .endm 63 64 .macro dabt_helper 65 66 @ 67 @ Call the processor-specific abort handler: 68 @ 69 @ r2 - pt_regs 70 @ r4 - aborted context pc 71 @ r5 - aborted context psr 72 @ 73 @ The abort handler must return the aborted address in r0, and 74 @ the fault status register in r1. r9 must be preserved. 75 @ 76#ifdef MULTI_DABORT 77 ldr ip, .LCprocfns 78 mov lr, pc 79 ldr pc, [ip, #PROCESSOR_DABT_FUNC] 80#else 81 bl CPU_DABORT_HANDLER 82#endif 83 .endm 84 85#ifdef CONFIG_KPROBES 86 .section .kprobes.text,"ax",%progbits 87#else 88 .text 89#endif 90 91/* 92 * Invalid mode handlers 93 */ 94 .macro inv_entry, reason 95 sub sp, sp, #S_FRAME_SIZE 96 ARM( stmib sp, {r1 - lr} ) 97 THUMB( stmia sp, {r0 - r12} ) 98 THUMB( str sp, [sp, #S_SP] ) 99 THUMB( str lr, [sp, #S_LR] ) 100 mov r1, #\reason 101 .endm 102 103__pabt_invalid: 104 inv_entry BAD_PREFETCH 105 b common_invalid 106ENDPROC(__pabt_invalid) 107 108__dabt_invalid: 109 inv_entry BAD_DATA 110 b common_invalid 111ENDPROC(__dabt_invalid) 112 113__irq_invalid: 114 inv_entry BAD_IRQ 115 b common_invalid 116ENDPROC(__irq_invalid) 117 118__und_invalid: 119 inv_entry BAD_UNDEFINSTR 120 121 @ 122 @ XXX fall through to common_invalid 123 @ 124 125@ 126@ common_invalid - generic code for failed exception (re-entrant version of handlers) 127@ 128common_invalid: 129 zero_fp 130 131 ldmia r0, {r4 - r6} 132 add r0, sp, #S_PC @ here for interlock avoidance 133 mov r7, #-1 @ "" "" "" "" 134 str r4, [sp] @ save preserved r0 135 stmia r0, {r5 - r7} @ lr_<exception>, 136 @ cpsr_<exception>, "old_r0" 137 138 mov r0, sp 139 b bad_mode 140ENDPROC(__und_invalid) 141 142/* 143 * SVC mode handlers 144 */ 145 146#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) 147#define SPFIX(code...) code 148#else 149#define SPFIX(code...) 150#endif 151 152 .macro svc_entry, stack_hole=0, trace=1, uaccess=1 153 UNWIND(.fnstart ) 154 UNWIND(.save {r0 - pc} ) 155 sub sp, sp, #(S_FRAME_SIZE + 8 + \stack_hole - 4) 156#ifdef CONFIG_THUMB2_KERNEL 157 SPFIX( str r0, [sp] ) @ temporarily saved 158 SPFIX( mov r0, sp ) 159 SPFIX( tst r0, #4 ) @ test original stack alignment 160 SPFIX( ldr r0, [sp] ) @ restored 161#else 162 SPFIX( tst sp, #4 ) 163#endif 164 SPFIX( subeq sp, sp, #4 ) 165 stmia sp, {r1 - r12} 166 167 ldmia r0, {r3 - r5} 168 add r7, sp, #S_SP - 4 @ here for interlock avoidance 169 mov r6, #-1 @ "" "" "" "" 170 add r2, sp, #(S_FRAME_SIZE + 8 + \stack_hole - 4) 171 SPFIX( addeq r2, r2, #4 ) 172 str r3, [sp, #-4]! @ save the "real" r0 copied 173 @ from the exception stack 174 175 mov r3, lr 176 177 @ 178 @ We are now ready to fill in the remaining blanks on the stack: 179 @ 180 @ r2 - sp_svc 181 @ r3 - lr_svc 182 @ r4 - lr_<exception>, already fixed up for correct return/restart 183 @ r5 - spsr_<exception> 184 @ r6 - orig_r0 (see pt_regs definition in ptrace.h) 185 @ 186 stmia r7, {r2 - r6} 187 188 uaccess_save r0 189 .if \uaccess 190 uaccess_disable r0 191 .endif 192 193 .if \trace 194#ifdef CONFIG_TRACE_IRQFLAGS 195 bl trace_hardirqs_off 196#endif 197 .endif 198 .endm 199 200 .align 5 201__dabt_svc: 202 svc_entry uaccess=0 203 mov r2, sp 204 dabt_helper 205 THUMB( ldr r5, [sp, #S_PSR] ) @ potentially updated CPSR 206 svc_exit r5 @ return from exception 207 UNWIND(.fnend ) 208ENDPROC(__dabt_svc) 209 210 .align 5 211__irq_svc: 212 svc_entry 213 irq_handler 214 215#ifdef CONFIG_PREEMPT 216 get_thread_info tsk 217 ldr r8, [tsk, #TI_PREEMPT] @ get preempt count 218 ldr r0, [tsk, #TI_FLAGS] @ get flags 219 teq r8, #0 @ if preempt count != 0 220 movne r0, #0 @ force flags to 0 221 tst r0, #_TIF_NEED_RESCHED 222 blne svc_preempt 223#endif 224 225 svc_exit r5, irq = 1 @ return from exception 226 UNWIND(.fnend ) 227ENDPROC(__irq_svc) 228 229 .ltorg 230 231#ifdef CONFIG_PREEMPT 232svc_preempt: 233 mov r8, lr 2341: bl preempt_schedule_irq @ irq en/disable is done inside 235 ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS 236 tst r0, #_TIF_NEED_RESCHED 237 reteq r8 @ go again 238 b 1b 239#endif 240 241__und_fault: 242 @ Correct the PC such that it is pointing at the instruction 243 @ which caused the fault. If the faulting instruction was ARM 244 @ the PC will be pointing at the next instruction, and have to 245 @ subtract 4. Otherwise, it is Thumb, and the PC will be 246 @ pointing at the second half of the Thumb instruction. We 247 @ have to subtract 2. 248 ldr r2, [r0, #S_PC] 249 sub r2, r2, r1 250 str r2, [r0, #S_PC] 251 b do_undefinstr 252ENDPROC(__und_fault) 253 254 .align 5 255__und_svc: 256#ifdef CONFIG_KPROBES 257 @ If a kprobe is about to simulate a "stmdb sp..." instruction, 258 @ it obviously needs free stack space which then will belong to 259 @ the saved context. 260 svc_entry MAX_STACK_SIZE 261#else 262 svc_entry 263#endif 264 @ 265 @ call emulation code, which returns using r9 if it has emulated 266 @ the instruction, or the more conventional lr if we are to treat 267 @ this as a real undefined instruction 268 @ 269 @ r0 - instruction 270 @ 271#ifndef CONFIG_THUMB2_KERNEL 272 ldr r0, [r4, #-4] 273#else 274 mov r1, #2 275 ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2 276 cmp r0, #0xe800 @ 32-bit instruction if xx >= 0 277 blo __und_svc_fault 278 ldrh r9, [r4] @ bottom 16 bits 279 add r4, r4, #2 280 str r4, [sp, #S_PC] 281 orr r0, r9, r0, lsl #16 282#endif 283 badr r9, __und_svc_finish 284 mov r2, r4 285 bl call_fpe 286 287 mov r1, #4 @ PC correction to apply 288__und_svc_fault: 289 mov r0, sp @ struct pt_regs *regs 290 bl __und_fault 291 292__und_svc_finish: 293 ldr r5, [sp, #S_PSR] @ Get SVC cpsr 294 svc_exit r5 @ return from exception 295 UNWIND(.fnend ) 296ENDPROC(__und_svc) 297 298 .align 5 299__pabt_svc: 300 svc_entry 301 mov r2, sp @ regs 302 pabt_helper 303 svc_exit r5 @ return from exception 304 UNWIND(.fnend ) 305ENDPROC(__pabt_svc) 306 307 .align 5 308__fiq_svc: 309 svc_entry trace=0 310 mov r0, sp @ struct pt_regs *regs 311 bl handle_fiq_as_nmi 312 svc_exit_via_fiq 313 UNWIND(.fnend ) 314ENDPROC(__fiq_svc) 315 316 .align 5 317.LCcralign: 318 .word cr_alignment 319#ifdef MULTI_DABORT 320.LCprocfns: 321 .word processor 322#endif 323.LCfp: 324 .word fp_enter 325 326/* 327 * Abort mode handlers 328 */ 329 330@ 331@ Taking a FIQ in abort mode is similar to taking a FIQ in SVC mode 332@ and reuses the same macros. However in abort mode we must also 333@ save/restore lr_abt and spsr_abt to make nested aborts safe. 334@ 335 .align 5 336__fiq_abt: 337 svc_entry trace=0 338 339 ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT ) 340 THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT ) 341 THUMB( msr cpsr_c, r0 ) 342 mov r1, lr @ Save lr_abt 343 mrs r2, spsr @ Save spsr_abt, abort is now safe 344 ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT ) 345 THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT ) 346 THUMB( msr cpsr_c, r0 ) 347 stmfd sp!, {r1 - r2} 348 349 add r0, sp, #8 @ struct pt_regs *regs 350 bl handle_fiq_as_nmi 351 352 ldmfd sp!, {r1 - r2} 353 ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT ) 354 THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT ) 355 THUMB( msr cpsr_c, r0 ) 356 mov lr, r1 @ Restore lr_abt, abort is unsafe 357 msr spsr_cxsf, r2 @ Restore spsr_abt 358 ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT ) 359 THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT ) 360 THUMB( msr cpsr_c, r0 ) 361 362 svc_exit_via_fiq 363 UNWIND(.fnend ) 364ENDPROC(__fiq_abt) 365 366/* 367 * User mode handlers 368 * 369 * EABI note: sp_svc is always 64-bit aligned here, so should S_FRAME_SIZE 370 */ 371 372#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) && (S_FRAME_SIZE & 7) 373#error "sizeof(struct pt_regs) must be a multiple of 8" 374#endif 375 376 .macro usr_entry, trace=1, uaccess=1 377 UNWIND(.fnstart ) 378 UNWIND(.cantunwind ) @ don't unwind the user space 379 sub sp, sp, #S_FRAME_SIZE 380 ARM( stmib sp, {r1 - r12} ) 381 THUMB( stmia sp, {r0 - r12} ) 382 383 ATRAP( mrc p15, 0, r7, c1, c0, 0) 384 ATRAP( ldr r8, .LCcralign) 385 386 ldmia r0, {r3 - r5} 387 add r0, sp, #S_PC @ here for interlock avoidance 388 mov r6, #-1 @ "" "" "" "" 389 390 str r3, [sp] @ save the "real" r0 copied 391 @ from the exception stack 392 393 ATRAP( ldr r8, [r8, #0]) 394 395 @ 396 @ We are now ready to fill in the remaining blanks on the stack: 397 @ 398 @ r4 - lr_<exception>, already fixed up for correct return/restart 399 @ r5 - spsr_<exception> 400 @ r6 - orig_r0 (see pt_regs definition in ptrace.h) 401 @ 402 @ Also, separately save sp_usr and lr_usr 403 @ 404 stmia r0, {r4 - r6} 405 ARM( stmdb r0, {sp, lr}^ ) 406 THUMB( store_user_sp_lr r0, r1, S_SP - S_PC ) 407 408 .if \uaccess 409 uaccess_disable ip 410 .endif 411 412 @ Enable the alignment trap while in kernel mode 413 ATRAP( teq r8, r7) 414 ATRAP( mcrne p15, 0, r8, c1, c0, 0) 415 416 @ 417 @ Clear FP to mark the first stack frame 418 @ 419 zero_fp 420 421 .if \trace 422#ifdef CONFIG_TRACE_IRQFLAGS 423 bl trace_hardirqs_off 424#endif 425 ct_user_exit save = 0 426 .endif 427 .endm 428 429 .macro kuser_cmpxchg_check 430#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) 431#ifndef CONFIG_MMU 432#warning "NPTL on non MMU needs fixing" 433#else 434 @ Make sure our user space atomic helper is restarted 435 @ if it was interrupted in a critical region. Here we 436 @ perform a quick test inline since it should be false 437 @ 99.9999% of the time. The rest is done out of line. 438 cmp r4, #TASK_SIZE 439 blhs kuser_cmpxchg64_fixup 440#endif 441#endif 442 .endm 443 444 .align 5 445__dabt_usr: 446 usr_entry uaccess=0 447 kuser_cmpxchg_check 448 mov r2, sp 449 dabt_helper 450 b ret_from_exception 451 UNWIND(.fnend ) 452ENDPROC(__dabt_usr) 453 454 .align 5 455__irq_usr: 456 usr_entry 457 kuser_cmpxchg_check 458 irq_handler 459 get_thread_info tsk 460 mov why, #0 461 b ret_to_user_from_irq 462 UNWIND(.fnend ) 463ENDPROC(__irq_usr) 464 465 .ltorg 466 467 .align 5 468__und_usr: 469 usr_entry uaccess=0 470 471 mov r2, r4 472 mov r3, r5 473 474 @ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the 475 @ faulting instruction depending on Thumb mode. 476 @ r3 = regs->ARM_cpsr 477 @ 478 @ The emulation code returns using r9 if it has emulated the 479 @ instruction, or the more conventional lr if we are to treat 480 @ this as a real undefined instruction 481 @ 482 badr r9, ret_from_exception 483 484 @ IRQs must be enabled before attempting to read the instruction from 485 @ user space since that could cause a page/translation fault if the 486 @ page table was modified by another CPU. 487 enable_irq 488 489 tst r3, #PSR_T_BIT @ Thumb mode? 490 bne __und_usr_thumb 491 sub r4, r2, #4 @ ARM instr at LR - 4 4921: ldrt r0, [r4] 493 ARM_BE8(rev r0, r0) @ little endian instruction 494 495 uaccess_disable ip 496 497 @ r0 = 32-bit ARM instruction which caused the exception 498 @ r2 = PC value for the following instruction (:= regs->ARM_pc) 499 @ r4 = PC value for the faulting instruction 500 @ lr = 32-bit undefined instruction function 501 badr lr, __und_usr_fault_32 502 b call_fpe 503 504__und_usr_thumb: 505 @ Thumb instruction 506 sub r4, r2, #2 @ First half of thumb instr at LR - 2 507#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7 508/* 509 * Thumb-2 instruction handling. Note that because pre-v6 and >= v6 platforms 510 * can never be supported in a single kernel, this code is not applicable at 511 * all when __LINUX_ARM_ARCH__ < 6. This allows simplifying assumptions to be 512 * made about .arch directives. 513 */ 514#if __LINUX_ARM_ARCH__ < 7 515/* If the target CPU may not be Thumb-2-capable, a run-time check is needed: */ 516#define NEED_CPU_ARCHITECTURE 517 ldr r5, .LCcpu_architecture 518 ldr r5, [r5] 519 cmp r5, #CPU_ARCH_ARMv7 520 blo __und_usr_fault_16 @ 16bit undefined instruction 521/* 522 * The following code won't get run unless the running CPU really is v7, so 523 * coding round the lack of ldrht on older arches is pointless. Temporarily 524 * override the assembler target arch with the minimum required instead: 525 */ 526 .arch armv6t2 527#endif 5282: ldrht r5, [r4] 529ARM_BE8(rev16 r5, r5) @ little endian instruction 530 cmp r5, #0xe800 @ 32bit instruction if xx != 0 531 blo __und_usr_fault_16_pan @ 16bit undefined instruction 5323: ldrht r0, [r2] 533ARM_BE8(rev16 r0, r0) @ little endian instruction 534 uaccess_disable ip 535 add r2, r2, #2 @ r2 is PC + 2, make it PC + 4 536 str r2, [sp, #S_PC] @ it's a 2x16bit instr, update 537 orr r0, r0, r5, lsl #16 538 badr lr, __und_usr_fault_32 539 @ r0 = the two 16-bit Thumb instructions which caused the exception 540 @ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc) 541 @ r4 = PC value for the first 16-bit Thumb instruction 542 @ lr = 32bit undefined instruction function 543 544#if __LINUX_ARM_ARCH__ < 7 545/* If the target arch was overridden, change it back: */ 546#ifdef CONFIG_CPU_32v6K 547 .arch armv6k 548#else 549 .arch armv6 550#endif 551#endif /* __LINUX_ARM_ARCH__ < 7 */ 552#else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */ 553 b __und_usr_fault_16 554#endif 555 UNWIND(.fnend) 556ENDPROC(__und_usr) 557 558/* 559 * The out of line fixup for the ldrt instructions above. 560 */ 561 .pushsection .text.fixup, "ax" 562 .align 2 5634: str r4, [sp, #S_PC] @ retry current instruction 564 ret r9 565 .popsection 566 .pushsection __ex_table,"a" 567 .long 1b, 4b 568#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7 569 .long 2b, 4b 570 .long 3b, 4b 571#endif 572 .popsection 573 574/* 575 * Check whether the instruction is a co-processor instruction. 576 * If yes, we need to call the relevant co-processor handler. 577 * 578 * Note that we don't do a full check here for the co-processor 579 * instructions; all instructions with bit 27 set are well 580 * defined. The only instructions that should fault are the 581 * co-processor instructions. However, we have to watch out 582 * for the ARM6/ARM7 SWI bug. 583 * 584 * NEON is a special case that has to be handled here. Not all 585 * NEON instructions are co-processor instructions, so we have 586 * to make a special case of checking for them. Plus, there's 587 * five groups of them, so we have a table of mask/opcode pairs 588 * to check against, and if any match then we branch off into the 589 * NEON handler code. 590 * 591 * Emulators may wish to make use of the following registers: 592 * r0 = instruction opcode (32-bit ARM or two 16-bit Thumb) 593 * r2 = PC value to resume execution after successful emulation 594 * r9 = normal "successful" return address 595 * r10 = this threads thread_info structure 596 * lr = unrecognised instruction return address 597 * IRQs enabled, FIQs enabled. 598 */ 599 @ 600 @ Fall-through from Thumb-2 __und_usr 601 @ 602#ifdef CONFIG_NEON 603 get_thread_info r10 @ get current thread 604 adr r6, .LCneon_thumb_opcodes 605 b 2f 606#endif 607call_fpe: 608 get_thread_info r10 @ get current thread 609#ifdef CONFIG_NEON 610 adr r6, .LCneon_arm_opcodes 6112: ldr r5, [r6], #4 @ mask value 612 ldr r7, [r6], #4 @ opcode bits matching in mask 613 cmp r5, #0 @ end mask? 614 beq 1f 615 and r8, r0, r5 616 cmp r8, r7 @ NEON instruction? 617 bne 2b 618 mov r7, #1 619 strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used 620 strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used 621 b do_vfp @ let VFP handler handle this 6221: 623#endif 624 tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 625 tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2 626 reteq lr 627 and r8, r0, #0x00000f00 @ mask out CP number 628 THUMB( lsr r8, r8, #8 ) 629 mov r7, #1 630 add r6, r10, #TI_USED_CP 631 ARM( strb r7, [r6, r8, lsr #8] ) @ set appropriate used_cp[] 632 THUMB( strb r7, [r6, r8] ) @ set appropriate used_cp[] 633#ifdef CONFIG_IWMMXT 634 @ Test if we need to give access to iWMMXt coprocessors 635 ldr r5, [r10, #TI_FLAGS] 636 rsbs r7, r8, #(1 << 8) @ CP 0 or 1 only 637 movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1) 638 bcs iwmmxt_task_enable 639#endif 640 ARM( add pc, pc, r8, lsr #6 ) 641 THUMB( lsl r8, r8, #2 ) 642 THUMB( add pc, r8 ) 643 nop 644 645 ret.w lr @ CP#0 646 W(b) do_fpe @ CP#1 (FPE) 647 W(b) do_fpe @ CP#2 (FPE) 648 ret.w lr @ CP#3 649#ifdef CONFIG_CRUNCH 650 b crunch_task_enable @ CP#4 (MaverickCrunch) 651 b crunch_task_enable @ CP#5 (MaverickCrunch) 652 b crunch_task_enable @ CP#6 (MaverickCrunch) 653#else 654 ret.w lr @ CP#4 655 ret.w lr @ CP#5 656 ret.w lr @ CP#6 657#endif 658 ret.w lr @ CP#7 659 ret.w lr @ CP#8 660 ret.w lr @ CP#9 661#ifdef CONFIG_VFP 662 W(b) do_vfp @ CP#10 (VFP) 663 W(b) do_vfp @ CP#11 (VFP) 664#else 665 ret.w lr @ CP#10 (VFP) 666 ret.w lr @ CP#11 (VFP) 667#endif 668 ret.w lr @ CP#12 669 ret.w lr @ CP#13 670 ret.w lr @ CP#14 (Debug) 671 ret.w lr @ CP#15 (Control) 672 673#ifdef NEED_CPU_ARCHITECTURE 674 .align 2 675.LCcpu_architecture: 676 .word __cpu_architecture 677#endif 678 679#ifdef CONFIG_NEON 680 .align 6 681 682.LCneon_arm_opcodes: 683 .word 0xfe000000 @ mask 684 .word 0xf2000000 @ opcode 685 686 .word 0xff100000 @ mask 687 .word 0xf4000000 @ opcode 688 689 .word 0x00000000 @ mask 690 .word 0x00000000 @ opcode 691 692.LCneon_thumb_opcodes: 693 .word 0xef000000 @ mask 694 .word 0xef000000 @ opcode 695 696 .word 0xff100000 @ mask 697 .word 0xf9000000 @ opcode 698 699 .word 0x00000000 @ mask 700 .word 0x00000000 @ opcode 701#endif 702 703do_fpe: 704 ldr r4, .LCfp 705 add r10, r10, #TI_FPSTATE @ r10 = workspace 706 ldr pc, [r4] @ Call FP module USR entry point 707 708/* 709 * The FP module is called with these registers set: 710 * r0 = instruction 711 * r2 = PC+4 712 * r9 = normal "successful" return address 713 * r10 = FP workspace 714 * lr = unrecognised FP instruction return address 715 */ 716 717 .pushsection .data 718ENTRY(fp_enter) 719 .word no_fp 720 .popsection 721 722ENTRY(no_fp) 723 ret lr 724ENDPROC(no_fp) 725 726__und_usr_fault_32: 727 mov r1, #4 728 b 1f 729__und_usr_fault_16_pan: 730 uaccess_disable ip 731__und_usr_fault_16: 732 mov r1, #2 7331: mov r0, sp 734 badr lr, ret_from_exception 735 b __und_fault 736ENDPROC(__und_usr_fault_32) 737ENDPROC(__und_usr_fault_16) 738 739 .align 5 740__pabt_usr: 741 usr_entry 742 mov r2, sp @ regs 743 pabt_helper 744 UNWIND(.fnend ) 745 /* fall through */ 746/* 747 * This is the return code to user mode for abort handlers 748 */ 749ENTRY(ret_from_exception) 750 UNWIND(.fnstart ) 751 UNWIND(.cantunwind ) 752 get_thread_info tsk 753 mov why, #0 754 b ret_to_user 755 UNWIND(.fnend ) 756ENDPROC(__pabt_usr) 757ENDPROC(ret_from_exception) 758 759 .align 5 760__fiq_usr: 761 usr_entry trace=0 762 kuser_cmpxchg_check 763 mov r0, sp @ struct pt_regs *regs 764 bl handle_fiq_as_nmi 765 get_thread_info tsk 766 restore_user_regs fast = 0, offset = 0 767 UNWIND(.fnend ) 768ENDPROC(__fiq_usr) 769 770/* 771 * Register switch for ARMv3 and ARMv4 processors 772 * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info 773 * previous and next are guaranteed not to be the same. 774 */ 775ENTRY(__switch_to) 776 UNWIND(.fnstart ) 777 UNWIND(.cantunwind ) 778 add ip, r1, #TI_CPU_SAVE 779 ARM( stmia ip!, {r4 - sl, fp, sp, lr} ) @ Store most regs on stack 780 THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack 781 THUMB( str sp, [ip], #4 ) 782 THUMB( str lr, [ip], #4 ) 783 ldr r4, [r2, #TI_TP_VALUE] 784 ldr r5, [r2, #TI_TP_VALUE + 4] 785#ifdef CONFIG_CPU_USE_DOMAINS 786 mrc p15, 0, r6, c3, c0, 0 @ Get domain register 787 str r6, [r1, #TI_CPU_DOMAIN] @ Save old domain register 788 ldr r6, [r2, #TI_CPU_DOMAIN] 789#endif 790 switch_tls r1, r4, r5, r3, r7 791#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) 792 ldr r7, [r2, #TI_TASK] 793 ldr r8, =__stack_chk_guard 794 ldr r7, [r7, #TSK_STACK_CANARY] 795#endif 796#ifdef CONFIG_CPU_USE_DOMAINS 797 mcr p15, 0, r6, c3, c0, 0 @ Set domain register 798#endif 799 mov r5, r0 800 add r4, r2, #TI_CPU_SAVE 801 ldr r0, =thread_notify_head 802 mov r1, #THREAD_NOTIFY_SWITCH 803 bl atomic_notifier_call_chain 804#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) 805 str r7, [r8] 806#endif 807 THUMB( mov ip, r4 ) 808 mov r0, r5 809 ARM( ldmia r4, {r4 - sl, fp, sp, pc} ) @ Load all regs saved previously 810 THUMB( ldmia ip!, {r4 - sl, fp} ) @ Load all regs saved previously 811 THUMB( ldr sp, [ip], #4 ) 812 THUMB( ldr pc, [ip] ) 813 UNWIND(.fnend ) 814ENDPROC(__switch_to) 815 816 __INIT 817 818/* 819 * User helpers. 820 * 821 * Each segment is 32-byte aligned and will be moved to the top of the high 822 * vector page. New segments (if ever needed) must be added in front of 823 * existing ones. This mechanism should be used only for things that are 824 * really small and justified, and not be abused freely. 825 * 826 * See Documentation/arm/kernel_user_helpers.txt for formal definitions. 827 */ 828 THUMB( .arm ) 829 830 .macro usr_ret, reg 831#ifdef CONFIG_ARM_THUMB 832 bx \reg 833#else 834 ret \reg 835#endif 836 .endm 837 838 .macro kuser_pad, sym, size 839 .if (. - \sym) & 3 840 .rept 4 - (. - \sym) & 3 841 .byte 0 842 .endr 843 .endif 844 .rept (\size - (. - \sym)) / 4 845 .word 0xe7fddef1 846 .endr 847 .endm 848 849#ifdef CONFIG_KUSER_HELPERS 850 .align 5 851 .globl __kuser_helper_start 852__kuser_helper_start: 853 854/* 855 * Due to the length of some sequences, __kuser_cmpxchg64 spans 2 regular 856 * kuser "slots", therefore 0xffff0f80 is not used as a valid entry point. 857 */ 858 859__kuser_cmpxchg64: @ 0xffff0f60 860 861#if defined(CONFIG_CPU_32v6K) 862 863 stmfd sp!, {r4, r5, r6, r7} 864 ldrd r4, r5, [r0] @ load old val 865 ldrd r6, r7, [r1] @ load new val 866 smp_dmb arm 8671: ldrexd r0, r1, [r2] @ load current val 868 eors r3, r0, r4 @ compare with oldval (1) 869 eoreqs r3, r1, r5 @ compare with oldval (2) 870 strexdeq r3, r6, r7, [r2] @ store newval if eq 871 teqeq r3, #1 @ success? 872 beq 1b @ if no then retry 873 smp_dmb arm 874 rsbs r0, r3, #0 @ set returned val and C flag 875 ldmfd sp!, {r4, r5, r6, r7} 876 usr_ret lr 877 878#elif !defined(CONFIG_SMP) 879 880#ifdef CONFIG_MMU 881 882 /* 883 * The only thing that can break atomicity in this cmpxchg64 884 * implementation is either an IRQ or a data abort exception 885 * causing another process/thread to be scheduled in the middle of 886 * the critical sequence. The same strategy as for cmpxchg is used. 887 */ 888 stmfd sp!, {r4, r5, r6, lr} 889 ldmia r0, {r4, r5} @ load old val 890 ldmia r1, {r6, lr} @ load new val 8911: ldmia r2, {r0, r1} @ load current val 892 eors r3, r0, r4 @ compare with oldval (1) 893 eoreqs r3, r1, r5 @ compare with oldval (2) 8942: stmeqia r2, {r6, lr} @ store newval if eq 895 rsbs r0, r3, #0 @ set return val and C flag 896 ldmfd sp!, {r4, r5, r6, pc} 897 898 .text 899kuser_cmpxchg64_fixup: 900 @ Called from kuser_cmpxchg_fixup. 901 @ r4 = address of interrupted insn (must be preserved). 902 @ sp = saved regs. r7 and r8 are clobbered. 903 @ 1b = first critical insn, 2b = last critical insn. 904 @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b. 905 mov r7, #0xffff0fff 906 sub r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64))) 907 subs r8, r4, r7 908 rsbcss r8, r8, #(2b - 1b) 909 strcs r7, [sp, #S_PC] 910#if __LINUX_ARM_ARCH__ < 6 911 bcc kuser_cmpxchg32_fixup 912#endif 913 ret lr 914 .previous 915 916#else 917#warning "NPTL on non MMU needs fixing" 918 mov r0, #-1 919 adds r0, r0, #0 920 usr_ret lr 921#endif 922 923#else 924#error "incoherent kernel configuration" 925#endif 926 927 kuser_pad __kuser_cmpxchg64, 64 928 929__kuser_memory_barrier: @ 0xffff0fa0 930 smp_dmb arm 931 usr_ret lr 932 933 kuser_pad __kuser_memory_barrier, 32 934 935__kuser_cmpxchg: @ 0xffff0fc0 936 937#if __LINUX_ARM_ARCH__ < 6 938 939#ifdef CONFIG_MMU 940 941 /* 942 * The only thing that can break atomicity in this cmpxchg 943 * implementation is either an IRQ or a data abort exception 944 * causing another process/thread to be scheduled in the middle 945 * of the critical sequence. To prevent this, code is added to 946 * the IRQ and data abort exception handlers to set the pc back 947 * to the beginning of the critical section if it is found to be 948 * within that critical section (see kuser_cmpxchg_fixup). 949 */ 9501: ldr r3, [r2] @ load current val 951 subs r3, r3, r0 @ compare with oldval 9522: streq r1, [r2] @ store newval if eq 953 rsbs r0, r3, #0 @ set return val and C flag 954 usr_ret lr 955 956 .text 957kuser_cmpxchg32_fixup: 958 @ Called from kuser_cmpxchg_check macro. 959 @ r4 = address of interrupted insn (must be preserved). 960 @ sp = saved regs. r7 and r8 are clobbered. 961 @ 1b = first critical insn, 2b = last critical insn. 962 @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b. 963 mov r7, #0xffff0fff 964 sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg))) 965 subs r8, r4, r7 966 rsbcss r8, r8, #(2b - 1b) 967 strcs r7, [sp, #S_PC] 968 ret lr 969 .previous 970 971#else 972#warning "NPTL on non MMU needs fixing" 973 mov r0, #-1 974 adds r0, r0, #0 975 usr_ret lr 976#endif 977 978#else 979 980 smp_dmb arm 9811: ldrex r3, [r2] 982 subs r3, r3, r0 983 strexeq r3, r1, [r2] 984 teqeq r3, #1 985 beq 1b 986 rsbs r0, r3, #0 987 /* beware -- each __kuser slot must be 8 instructions max */ 988 ALT_SMP(b __kuser_memory_barrier) 989 ALT_UP(usr_ret lr) 990 991#endif 992 993 kuser_pad __kuser_cmpxchg, 32 994 995__kuser_get_tls: @ 0xffff0fe0 996 ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init 997 usr_ret lr 998 mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code 999 kuser_pad __kuser_get_tls, 16 1000 .rep 3 1001 .word 0 @ 0xffff0ff0 software TLS value, then 1002 .endr @ pad up to __kuser_helper_version 1003 1004__kuser_helper_version: @ 0xffff0ffc 1005 .word ((__kuser_helper_end - __kuser_helper_start) >> 5) 1006 1007 .globl __kuser_helper_end 1008__kuser_helper_end: 1009 1010#endif 1011 1012 THUMB( .thumb ) 1013 1014/* 1015 * Vector stubs. 1016 * 1017 * This code is copied to 0xffff1000 so we can use branches in the 1018 * vectors, rather than ldr's. Note that this code must not exceed 1019 * a page size. 1020 * 1021 * Common stub entry macro: 1022 * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC 1023 * 1024 * SP points to a minimal amount of processor-private memory, the address 1025 * of which is copied into r0 for the mode specific abort handler. 1026 */ 1027 .macro vector_stub, name, mode, correction=0 1028 .align 5 1029 1030vector_\name: 1031 .if \correction 1032 sub lr, lr, #\correction 1033 .endif 1034 1035 @ 1036 @ Save r0, lr_<exception> (parent PC) and spsr_<exception> 1037 @ (parent CPSR) 1038 @ 1039 stmia sp, {r0, lr} @ save r0, lr 1040 mrs lr, spsr 1041 str lr, [sp, #8] @ save spsr 1042 1043 @ 1044 @ Prepare for SVC32 mode. IRQs remain disabled. 1045 @ 1046 mrs r0, cpsr 1047 eor r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE) 1048 msr spsr_cxsf, r0 1049 1050 @ 1051 @ the branch table must immediately follow this code 1052 @ 1053 and lr, lr, #0x0f 1054 THUMB( adr r0, 1f ) 1055 THUMB( ldr lr, [r0, lr, lsl #2] ) 1056 mov r0, sp 1057 ARM( ldr lr, [pc, lr, lsl #2] ) 1058 movs pc, lr @ branch to handler in SVC mode 1059ENDPROC(vector_\name) 1060 1061 .align 2 1062 @ handler addresses follow this label 10631: 1064 .endm 1065 1066 .section .stubs, "ax", %progbits 1067__stubs_start: 1068 @ This must be the first word 1069 .word vector_swi 1070 1071vector_rst: 1072 ARM( swi SYS_ERROR0 ) 1073 THUMB( svc #0 ) 1074 THUMB( nop ) 1075 b vector_und 1076 1077/* 1078 * Interrupt dispatcher 1079 */ 1080 vector_stub irq, IRQ_MODE, 4 1081 1082 .long __irq_usr @ 0 (USR_26 / USR_32) 1083 .long __irq_invalid @ 1 (FIQ_26 / FIQ_32) 1084 .long __irq_invalid @ 2 (IRQ_26 / IRQ_32) 1085 .long __irq_svc @ 3 (SVC_26 / SVC_32) 1086 .long __irq_invalid @ 4 1087 .long __irq_invalid @ 5 1088 .long __irq_invalid @ 6 1089 .long __irq_invalid @ 7 1090 .long __irq_invalid @ 8 1091 .long __irq_invalid @ 9 1092 .long __irq_invalid @ a 1093 .long __irq_invalid @ b 1094 .long __irq_invalid @ c 1095 .long __irq_invalid @ d 1096 .long __irq_invalid @ e 1097 .long __irq_invalid @ f 1098 1099/* 1100 * Data abort dispatcher 1101 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC 1102 */ 1103 vector_stub dabt, ABT_MODE, 8 1104 1105 .long __dabt_usr @ 0 (USR_26 / USR_32) 1106 .long __dabt_invalid @ 1 (FIQ_26 / FIQ_32) 1107 .long __dabt_invalid @ 2 (IRQ_26 / IRQ_32) 1108 .long __dabt_svc @ 3 (SVC_26 / SVC_32) 1109 .long __dabt_invalid @ 4 1110 .long __dabt_invalid @ 5 1111 .long __dabt_invalid @ 6 1112 .long __dabt_invalid @ 7 1113 .long __dabt_invalid @ 8 1114 .long __dabt_invalid @ 9 1115 .long __dabt_invalid @ a 1116 .long __dabt_invalid @ b 1117 .long __dabt_invalid @ c 1118 .long __dabt_invalid @ d 1119 .long __dabt_invalid @ e 1120 .long __dabt_invalid @ f 1121 1122/* 1123 * Prefetch abort dispatcher 1124 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC 1125 */ 1126 vector_stub pabt, ABT_MODE, 4 1127 1128 .long __pabt_usr @ 0 (USR_26 / USR_32) 1129 .long __pabt_invalid @ 1 (FIQ_26 / FIQ_32) 1130 .long __pabt_invalid @ 2 (IRQ_26 / IRQ_32) 1131 .long __pabt_svc @ 3 (SVC_26 / SVC_32) 1132 .long __pabt_invalid @ 4 1133 .long __pabt_invalid @ 5 1134 .long __pabt_invalid @ 6 1135 .long __pabt_invalid @ 7 1136 .long __pabt_invalid @ 8 1137 .long __pabt_invalid @ 9 1138 .long __pabt_invalid @ a 1139 .long __pabt_invalid @ b 1140 .long __pabt_invalid @ c 1141 .long __pabt_invalid @ d 1142 .long __pabt_invalid @ e 1143 .long __pabt_invalid @ f 1144 1145/* 1146 * Undef instr entry dispatcher 1147 * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC 1148 */ 1149 vector_stub und, UND_MODE 1150 1151 .long __und_usr @ 0 (USR_26 / USR_32) 1152 .long __und_invalid @ 1 (FIQ_26 / FIQ_32) 1153 .long __und_invalid @ 2 (IRQ_26 / IRQ_32) 1154 .long __und_svc @ 3 (SVC_26 / SVC_32) 1155 .long __und_invalid @ 4 1156 .long __und_invalid @ 5 1157 .long __und_invalid @ 6 1158 .long __und_invalid @ 7 1159 .long __und_invalid @ 8 1160 .long __und_invalid @ 9 1161 .long __und_invalid @ a 1162 .long __und_invalid @ b 1163 .long __und_invalid @ c 1164 .long __und_invalid @ d 1165 .long __und_invalid @ e 1166 .long __und_invalid @ f 1167 1168 .align 5 1169 1170/*============================================================================= 1171 * Address exception handler 1172 *----------------------------------------------------------------------------- 1173 * These aren't too critical. 1174 * (they're not supposed to happen, and won't happen in 32-bit data mode). 1175 */ 1176 1177vector_addrexcptn: 1178 b vector_addrexcptn 1179 1180/*============================================================================= 1181 * FIQ "NMI" handler 1182 *----------------------------------------------------------------------------- 1183 * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86 1184 * systems. 1185 */ 1186 vector_stub fiq, FIQ_MODE, 4 1187 1188 .long __fiq_usr @ 0 (USR_26 / USR_32) 1189 .long __fiq_svc @ 1 (FIQ_26 / FIQ_32) 1190 .long __fiq_svc @ 2 (IRQ_26 / IRQ_32) 1191 .long __fiq_svc @ 3 (SVC_26 / SVC_32) 1192 .long __fiq_svc @ 4 1193 .long __fiq_svc @ 5 1194 .long __fiq_svc @ 6 1195 .long __fiq_abt @ 7 1196 .long __fiq_svc @ 8 1197 .long __fiq_svc @ 9 1198 .long __fiq_svc @ a 1199 .long __fiq_svc @ b 1200 .long __fiq_svc @ c 1201 .long __fiq_svc @ d 1202 .long __fiq_svc @ e 1203 .long __fiq_svc @ f 1204 1205 .globl vector_fiq_offset 1206 .equ vector_fiq_offset, vector_fiq 1207 1208 .section .vectors, "ax", %progbits 1209__vectors_start: 1210 W(b) vector_rst 1211 W(b) vector_und 1212 W(ldr) pc, __vectors_start + 0x1000 1213 W(b) vector_pabt 1214 W(b) vector_dabt 1215 W(b) vector_addrexcptn 1216 W(b) vector_irq 1217 W(b) vector_fiq 1218 1219 .data 1220 1221 .globl cr_alignment 1222cr_alignment: 1223 .space 4 1224 1225#ifdef CONFIG_MULTI_IRQ_HANDLER 1226 .globl handle_arch_irq 1227handle_arch_irq: 1228 .space 4 1229#endif 1230