1/* 2 * Google Veyron (and derivatives) fragment for sdmmc cards 3 * 4 * Copyright 2015 Google, Inc 5 * 6 * This file is dual-licensed: you can use it either under the terms 7 * of the GPL or the X11 license, at your option. Note that this dual 8 * licensing only applies to this file, and not this project as a 9 * whole. 10 * 11 * a) This file is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of the 14 * License, or (at your option) any later version. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45&io_domains { 46 sdcard-supply = <&vccio_sd>; 47}; 48 49&pinctrl { 50 sdmmc { 51 /* 52 * We run sdmmc at max speed; bump up drive strength. 53 * We also have external pulls, so disable the internal ones. 54 */ 55 sdmmc_bus4: sdmmc-bus4 { 56 rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, 57 <6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, 58 <6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, 59 <6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; 60 }; 61 62 sdmmc_clk: sdmmc-clk { 63 rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; 64 }; 65 66 sdmmc_cmd: sdmmc-cmd { 67 rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; 68 }; 69 70 /* 71 * Builtin CD line is hooked to ground to prevent JTAG at boot 72 * (and also to get the voltage rail correct). 73 * Configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't 74 * think there's a card inserted 75 */ 76 sdmmc_cd_disabled: sdmmc-cd-disabled { 77 rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>; 78 }; 79 80 /* This is where we actually hook up CD */ 81 sdmmc_cd_gpio: sdmmc-cd-gpio { 82 rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>; 83 }; 84 }; 85}; 86 87&rk808 { 88 vcc9-supply = <&vcc_5v>; 89 90 regulators { 91 vccio_sd: LDO_REG4 { 92 regulator-name = "vccio_sd"; 93 regulator-min-microvolt = <1800000>; 94 regulator-max-microvolt = <3300000>; 95 regulator-state-mem { 96 regulator-off-in-suspend; 97 }; 98 }; 99 100 vcc33_sd: LDO_REG5 { 101 regulator-name = "vcc33_sd"; 102 regulator-min-microvolt = <3300000>; 103 regulator-max-microvolt = <3300000>; 104 regulator-state-mem { 105 regulator-off-in-suspend; 106 }; 107 }; 108 }; 109}; 110 111&sdmmc { 112 status = "okay"; 113 114 bus-width = <4>; 115 cap-mmc-highspeed; 116 cap-sd-highspeed; 117 card-detect-delay = <200>; 118 cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; 119 rockchip,default-sample-phase = <90>; 120 num-slots = <1>; 121 sd-uhs-sdr12; 122 sd-uhs-sdr25; 123 sd-uhs-sdr50; 124 sd-uhs-sdr104; 125 vmmc-supply = <&vcc33_sd>; 126 vqmmc-supply = <&vccio_sd>; 127}; 128