1/* 2 * Copyright (C) 2014 Antoine T��nart <antoine.tenart@free-electrons.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is licensed under the terms of the GNU General Public 10 * License version 2. This program is licensed "as is" without any 11 * warranty of any kind, whether express or implied. 12 * 13 * Or, alternatively, 14 * 15 * b) Permission is hereby granted, free of charge, to any person 16 * obtaining a copy of this software and associated documentation 17 * files (the "Software"), to deal in the Software without 18 * restriction, including without limitation the rights to use, 19 * copy, modify, merge, publish, distribute, sublicense, and/or 20 * sell copies of the Software, and to permit persons to whom the 21 * Software is furnished to do so, subject to the following 22 * conditions: 23 * 24 * The above copyright notice and this permission notice shall be 25 * included in all copies or substantial portions of the Software. 26 * 27 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 28 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 29 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 30 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 31 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 32 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 33 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 34 * OTHER DEALINGS IN THE SOFTWARE. 35 */ 36 37/dts-v1/; 38 39#include <dt-bindings/gpio/gpio.h> 40#include "berlin2q.dtsi" 41 42/ { 43 model = "Marvell BG2-Q DMP"; 44 compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin"; 45 46 memory { 47 device_type = "memory"; 48 reg = <0x00000000 0x80000000>; 49 }; 50 51 choosen { 52 bootargs = "earlyprintk"; 53 stdout-path = "serial0:115200n8"; 54 }; 55 56 regulators { 57 compatible = "simple-bus"; 58 #address-cells = <1>; 59 #size-cells = <0>; 60 61 reg_usb0_vbus: regulator@0 { 62 compatible = "regulator-fixed"; 63 regulator-name = "usb0_vbus"; 64 regulator-min-microvolt = <5000000>; 65 regulator-max-microvolt = <5000000>; 66 gpio = <&portb 8 GPIO_ACTIVE_HIGH>; 67 enable-active-high; 68 }; 69 70 reg_usb1_vbus: regulator@1 { 71 compatible = "regulator-fixed"; 72 regulator-name = "usb1_vbus"; 73 regulator-min-microvolt = <5000000>; 74 regulator-max-microvolt = <5000000>; 75 gpio = <&portb 10 GPIO_ACTIVE_HIGH>; 76 enable-active-high; 77 }; 78 79 reg_usb2_vbus: regulator@2 { 80 compatible = "regulator-fixed"; 81 regulator-name = "usb2_vbus"; 82 regulator-min-microvolt = <5000000>; 83 regulator-max-microvolt = <5000000>; 84 gpio = <&portb 12 GPIO_ACTIVE_HIGH>; 85 enable-active-high; 86 }; 87 }; 88}; 89 90&sdhci1 { 91 broken-cd; 92 sdhci,wp-inverted; 93 status = "okay"; 94}; 95 96&sdhci2 { 97 broken-cd; 98 bus-width = <8>; 99 non-removable; 100 status = "okay"; 101}; 102 103&i2c0 { 104 status = "okay"; 105}; 106 107&i2c2 { 108 status = "okay"; 109}; 110 111&uart0 { 112 status = "okay"; 113}; 114 115&usb_phy0 { 116 status = "okay"; 117}; 118 119&usb_phy2 { 120 status = "okay"; 121}; 122 123&usb0 { 124 vbus-supply = <®_usb0_vbus>; 125 status = "okay"; 126}; 127 128&usb2 { 129 vbus-supply = <®_usb2_vbus>; 130 status = "okay"; 131}; 132 133ð0 { 134 status = "okay"; 135}; 136 137&sata0 { 138 status = "okay"; 139}; 140 141&sata_phy { 142 status = "okay"; 143}; 144