1/*
2 *	linux/arch/alpha/kernel/es1888.c
3 *
4 * Init the built-in ES1888 sound chip (SB16 compatible)
5 */
6
7#include <linux/init.h>
8#include <asm/io.h>
9#include "proto.h"
10
11void __init
12es1888_init(void)
13{
14	/* Sequence of IO reads to init the audio controller */
15	inb(0x0229);
16	inb(0x0229);
17	inb(0x0229);
18	inb(0x022b);
19	inb(0x0229);
20	inb(0x022b);
21	inb(0x0229);
22	inb(0x0229);
23	inb(0x022b);
24	inb(0x0229);
25	inb(0x0220); /* This sets the base address to 0x220 */
26
27	/* Sequence to set DMA channels */
28	outb(0x01, 0x0226);		/* reset */
29	inb(0x0226);			/* pause */
30	outb(0x00, 0x0226);		/* release reset */
31	while (!(inb(0x022e) & 0x80))	/* wait for bit 7 to assert*/
32		continue;
33	inb(0x022a);			/* pause */
34	outb(0xc6, 0x022c);		/* enable extended mode */
35	inb(0x022a);			/* pause, also forces the write */
36	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
37		continue;
38	outb(0xb1, 0x022c);		/* setup for write to Interrupt CR */
39	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
40		continue;
41	outb(0x14, 0x022c);		/* set IRQ 5 */
42	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
43		continue;
44	outb(0xb2, 0x022c);		/* setup for write to DMA CR */
45	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
46		continue;
47	outb(0x18, 0x022c);		/* set DMA channel 1 */
48	inb(0x022c);			/* force the write */
49}
50