1* Pin configuration nodes
2
3Required properties:
4- pio-map : array of pin configurations.  Each pin is defined by 6
5  integers.  The six numbers are respectively: port, pin, dir,
6  open_drain, assignment, has_irq.
7  - port : port number of the pin; 0-6 represent port A-G in UM.
8  - pin : pin number in the port.
9  - dir : direction of the pin, should encode as follows:
10
11     0 = The pin is disabled
12     1 = The pin is an output
13     2 = The pin is an input
14     3 = The pin is I/O
15
16  - open_drain : indicates the pin is normal or wired-OR:
17
18     0 = The pin is actively driven as an output
19     1 = The pin is an open-drain driver. As an output, the pin is
20         driven active-low, otherwise it is three-stated.
21
22  - assignment : function number of the pin according to the Pin Assignment
23    tables in User Manual.  Each pin can have up to 4 possible functions in
24    QE and two options for CPM.
25  - has_irq : indicates if the pin is used as source of external
26    interrupts.
27
28Example:
29     ucc_pin@01 {
30	pio-map = <
31	/* port  pin  dir  open_drain  assignment  has_irq */
32		0  3  1  0  1  0 	/* TxD0 */
33		0  4  1  0  1  0 	/* TxD1 */
34		0  5  1  0  1  0 	/* TxD2 */
35		0  6  1  0  1  0 	/* TxD3 */
36		1  6  1  0  3  0 	/* TxD4 */
37		1  7  1  0  1  0 	/* TxD5 */
38		1  9  1  0  2  0 	/* TxD6 */
39		1  a  1  0  2  0 	/* TxD7 */
40		0  9  2  0  1  0 	/* RxD0 */
41		0  a  2  0  1  0 	/* RxD1 */
42		0  b  2  0  1  0 	/* RxD2 */
43		0  c  2  0  1  0 	/* RxD3 */
44		0  d  2  0  1  0 	/* RxD4 */
45		1  1  2  0  2  0 	/* RxD5 */
46		1  0  2  0  2  0 	/* RxD6 */
47		1  4  2  0  2  0 	/* RxD7 */
48		0  7  1  0  1  0 	/* TX_EN */
49		0  8  1  0  1  0 	/* TX_ER */
50		0  f  2  0  1  0 	/* RX_DV */
51		0  10 2  0  1  0 	/* RX_ER */
52		0  0  2  0  1  0 	/* RX_CLK */
53		2  9  1  0  3  0 	/* GTX_CLK - CLK10 */
54		2  8  2  0  1  0>;	/* GTX125 - CLK9 */
55     };
56
57
58