1i.mx6 Poweroff Driver
2
3SNVS_LPCR in SNVS module can power off the whole system by pull
4PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC.
5If you don't want to use PMIC_ON_REQ as power on/off control,
6please set status='disabled' to disable this driver.
7
8Required Properties:
9-compatible: "fsl,sec-v4.0-poweroff"
10-reg: Specifies the physical address of the SNVS_LPCR register
11
12Example:
13	snvs@020cc000 {
14		compatible = "fsl,sec-v4.0-mon", "simple-bus";
15		#address-cells = <1>;
16		#size-cells = <1>;
17		ranges = <0 0x020cc000 0x4000>;
18		.....
19		snvs_poweroff: snvs-poweroff@38 {
20			compatible = "fsl,sec-v4.0-poweroff";
21			reg = <0x38 0x4>;
22		};
23	}
24