1* Broadcom SATA3 PHY for STB 2 3Required properties: 4- compatible: should be one or more of 5 "brcm,bcm7445-sata-phy" 6 "brcm,phy-sata3" 7- address-cells: should be 1 8- size-cells: should be 0 9- reg: register range for the PHY PCB interface 10- reg-names: should be "phy" 11 12Sub-nodes: 13 Each port's PHY should be represented as a sub-node. 14 15Sub-nodes required properties: 16- reg: the PHY number 17- phy-cells: generic PHY binding; must be 0 18Optional: 19- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port 20 21 22Example: 23 24 sata-phy@f0458100 { 25 compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; 26 reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>; 27 reg-names = "phy"; 28 #address-cells = <1>; 29 #size-cells = <0>; 30 31 sata-phy@0 { 32 reg = <0>; 33 #phy-cells = <0>; 34 }; 35 36 sata-phy@1 { 37 reg = <1>; 38 #phy-cells = <0>; 39 }; 40 }; 41