1Simple display panel
2
3Required properties:
4- power-supply: regulator to provide the supply voltage
5
6Optional properties:
7- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
8- enable-gpios: GPIO pin to enable or disable the panel
9- backlight: phandle of the backlight device attached to the panel
10
11Example:
12
13	panel: panel {
14		compatible = "cptt,claa101wb01";
15		ddc-i2c-bus = <&panelddc>;
16
17		power-supply = <&vdd_pnl_reg>;
18		enable-gpios = <&gpio 90 0>;
19
20		backlight = <&backlight>;
21	};
22