1/* 2 * Kernel Debug Core 3 * 4 * Maintainer: Jason Wessel <jason.wessel@windriver.com> 5 * 6 * Copyright (C) 2000-2001 VERITAS Software Corporation. 7 * Copyright (C) 2002-2004 Timesys Corporation 8 * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com> 9 * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz> 10 * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org> 11 * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. 12 * Copyright (C) 2005-2009 Wind River Systems, Inc. 13 * Copyright (C) 2007 MontaVista Software, Inc. 14 * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> 15 * 16 * Contributors at various stages not listed above: 17 * Jason Wessel ( jason.wessel@windriver.com ) 18 * George Anzinger <george@mvista.com> 19 * Anurekh Saxena (anurekh.saxena@timesys.com) 20 * Lake Stevens Instrument Division (Glenn Engel) 21 * Jim Kingdon, Cygnus Support. 22 * 23 * Original KGDB stub: David Grothe <dave@gcom.com>, 24 * Tigran Aivazian <tigran@sco.com> 25 * 26 * This file is licensed under the terms of the GNU General Public License 27 * version 2. This program is licensed "as is" without any warranty of any 28 * kind, whether express or implied. 29 */ 30 31#include <linux/kernel.h> 32#include <linux/kgdb.h> 33#include <linux/kdb.h> 34#include <linux/serial_core.h> 35#include <linux/reboot.h> 36#include <linux/uaccess.h> 37#include <asm/cacheflush.h> 38#include <asm/unaligned.h> 39#include "debug_core.h" 40 41#define KGDB_MAX_THREAD_QUERY 17 42 43/* Our I/O buffers. */ 44static char remcom_in_buffer[BUFMAX]; 45static char remcom_out_buffer[BUFMAX]; 46static int gdbstub_use_prev_in_buf; 47static int gdbstub_prev_in_buf_pos; 48 49/* Storage for the registers, in GDB format. */ 50static unsigned long gdb_regs[(NUMREGBYTES + 51 sizeof(unsigned long) - 1) / 52 sizeof(unsigned long)]; 53 54/* 55 * GDB remote protocol parser: 56 */ 57 58#ifdef CONFIG_KGDB_KDB 59static int gdbstub_read_wait(void) 60{ 61 int ret = -1; 62 int i; 63 64 if (unlikely(gdbstub_use_prev_in_buf)) { 65 if (gdbstub_prev_in_buf_pos < gdbstub_use_prev_in_buf) 66 return remcom_in_buffer[gdbstub_prev_in_buf_pos++]; 67 else 68 gdbstub_use_prev_in_buf = 0; 69 } 70 71 /* poll any additional I/O interfaces that are defined */ 72 while (ret < 0) 73 for (i = 0; kdb_poll_funcs[i] != NULL; i++) { 74 ret = kdb_poll_funcs[i](); 75 if (ret > 0) 76 break; 77 } 78 return ret; 79} 80#else 81static int gdbstub_read_wait(void) 82{ 83 int ret = dbg_io_ops->read_char(); 84 while (ret == NO_POLL_CHAR) 85 ret = dbg_io_ops->read_char(); 86 return ret; 87} 88#endif 89/* scan for the sequence $<data>#<checksum> */ 90static void get_packet(char *buffer) 91{ 92 unsigned char checksum; 93 unsigned char xmitcsum; 94 int count; 95 char ch; 96 97 do { 98 /* 99 * Spin and wait around for the start character, ignore all 100 * other characters: 101 */ 102 while ((ch = (gdbstub_read_wait())) != '$') 103 /* nothing */; 104 105 kgdb_connected = 1; 106 checksum = 0; 107 xmitcsum = -1; 108 109 count = 0; 110 111 /* 112 * now, read until a # or end of buffer is found: 113 */ 114 while (count < (BUFMAX - 1)) { 115 ch = gdbstub_read_wait(); 116 if (ch == '#') 117 break; 118 checksum = checksum + ch; 119 buffer[count] = ch; 120 count = count + 1; 121 } 122 123 if (ch == '#') { 124 xmitcsum = hex_to_bin(gdbstub_read_wait()) << 4; 125 xmitcsum += hex_to_bin(gdbstub_read_wait()); 126 127 if (checksum != xmitcsum) 128 /* failed checksum */ 129 dbg_io_ops->write_char('-'); 130 else 131 /* successful transfer */ 132 dbg_io_ops->write_char('+'); 133 if (dbg_io_ops->flush) 134 dbg_io_ops->flush(); 135 } 136 buffer[count] = 0; 137 } while (checksum != xmitcsum); 138} 139 140/* 141 * Send the packet in buffer. 142 * Check for gdb connection if asked for. 143 */ 144static void put_packet(char *buffer) 145{ 146 unsigned char checksum; 147 int count; 148 char ch; 149 150 /* 151 * $<packet info>#<checksum>. 152 */ 153 while (1) { 154 dbg_io_ops->write_char('$'); 155 checksum = 0; 156 count = 0; 157 158 while ((ch = buffer[count])) { 159 dbg_io_ops->write_char(ch); 160 checksum += ch; 161 count++; 162 } 163 164 dbg_io_ops->write_char('#'); 165 dbg_io_ops->write_char(hex_asc_hi(checksum)); 166 dbg_io_ops->write_char(hex_asc_lo(checksum)); 167 if (dbg_io_ops->flush) 168 dbg_io_ops->flush(); 169 170 /* Now see what we get in reply. */ 171 ch = gdbstub_read_wait(); 172 173 if (ch == 3) 174 ch = gdbstub_read_wait(); 175 176 /* If we get an ACK, we are done. */ 177 if (ch == '+') 178 return; 179 180 /* 181 * If we get the start of another packet, this means 182 * that GDB is attempting to reconnect. We will NAK 183 * the packet being sent, and stop trying to send this 184 * packet. 185 */ 186 if (ch == '$') { 187 dbg_io_ops->write_char('-'); 188 if (dbg_io_ops->flush) 189 dbg_io_ops->flush(); 190 return; 191 } 192 } 193} 194 195static char gdbmsgbuf[BUFMAX + 1]; 196 197void gdbstub_msg_write(const char *s, int len) 198{ 199 char *bufptr; 200 int wcount; 201 int i; 202 203 if (len == 0) 204 len = strlen(s); 205 206 /* 'O'utput */ 207 gdbmsgbuf[0] = 'O'; 208 209 /* Fill and send buffers... */ 210 while (len > 0) { 211 bufptr = gdbmsgbuf + 1; 212 213 /* Calculate how many this time */ 214 if ((len << 1) > (BUFMAX - 2)) 215 wcount = (BUFMAX - 2) >> 1; 216 else 217 wcount = len; 218 219 /* Pack in hex chars */ 220 for (i = 0; i < wcount; i++) 221 bufptr = hex_byte_pack(bufptr, s[i]); 222 *bufptr = '\0'; 223 224 /* Move up */ 225 s += wcount; 226 len -= wcount; 227 228 /* Write packet */ 229 put_packet(gdbmsgbuf); 230 } 231} 232 233/* 234 * Convert the memory pointed to by mem into hex, placing result in 235 * buf. Return a pointer to the last char put in buf (null). May 236 * return an error. 237 */ 238char *kgdb_mem2hex(char *mem, char *buf, int count) 239{ 240 char *tmp; 241 int err; 242 243 /* 244 * We use the upper half of buf as an intermediate buffer for the 245 * raw memory copy. Hex conversion will work against this one. 246 */ 247 tmp = buf + count; 248 249 err = probe_kernel_read(tmp, mem, count); 250 if (err) 251 return NULL; 252 while (count > 0) { 253 buf = hex_byte_pack(buf, *tmp); 254 tmp++; 255 count--; 256 } 257 *buf = 0; 258 259 return buf; 260} 261 262/* 263 * Convert the hex array pointed to by buf into binary to be placed in 264 * mem. Return a pointer to the character AFTER the last byte 265 * written. May return an error. 266 */ 267int kgdb_hex2mem(char *buf, char *mem, int count) 268{ 269 char *tmp_raw; 270 char *tmp_hex; 271 272 /* 273 * We use the upper half of buf as an intermediate buffer for the 274 * raw memory that is converted from hex. 275 */ 276 tmp_raw = buf + count * 2; 277 278 tmp_hex = tmp_raw - 1; 279 while (tmp_hex >= buf) { 280 tmp_raw--; 281 *tmp_raw = hex_to_bin(*tmp_hex--); 282 *tmp_raw |= hex_to_bin(*tmp_hex--) << 4; 283 } 284 285 return probe_kernel_write(mem, tmp_raw, count); 286} 287 288/* 289 * While we find nice hex chars, build a long_val. 290 * Return number of chars processed. 291 */ 292int kgdb_hex2long(char **ptr, unsigned long *long_val) 293{ 294 int hex_val; 295 int num = 0; 296 int negate = 0; 297 298 *long_val = 0; 299 300 if (**ptr == '-') { 301 negate = 1; 302 (*ptr)++; 303 } 304 while (**ptr) { 305 hex_val = hex_to_bin(**ptr); 306 if (hex_val < 0) 307 break; 308 309 *long_val = (*long_val << 4) | hex_val; 310 num++; 311 (*ptr)++; 312 } 313 314 if (negate) 315 *long_val = -*long_val; 316 317 return num; 318} 319 320/* 321 * Copy the binary array pointed to by buf into mem. Fix $, #, and 322 * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success. 323 * The input buf is overwitten with the result to write to mem. 324 */ 325static int kgdb_ebin2mem(char *buf, char *mem, int count) 326{ 327 int size = 0; 328 char *c = buf; 329 330 while (count-- > 0) { 331 c[size] = *buf++; 332 if (c[size] == 0x7d) 333 c[size] = *buf++ ^ 0x20; 334 size++; 335 } 336 337 return probe_kernel_write(mem, c, size); 338} 339 340#if DBG_MAX_REG_NUM > 0 341void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) 342{ 343 int i; 344 int idx = 0; 345 char *ptr = (char *)gdb_regs; 346 347 for (i = 0; i < DBG_MAX_REG_NUM; i++) { 348 dbg_get_reg(i, ptr + idx, regs); 349 idx += dbg_reg_def[i].size; 350 } 351} 352 353void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) 354{ 355 int i; 356 int idx = 0; 357 char *ptr = (char *)gdb_regs; 358 359 for (i = 0; i < DBG_MAX_REG_NUM; i++) { 360 dbg_set_reg(i, ptr + idx, regs); 361 idx += dbg_reg_def[i].size; 362 } 363} 364#endif /* DBG_MAX_REG_NUM > 0 */ 365 366/* Write memory due to an 'M' or 'X' packet. */ 367static int write_mem_msg(int binary) 368{ 369 char *ptr = &remcom_in_buffer[1]; 370 unsigned long addr; 371 unsigned long length; 372 int err; 373 374 if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' && 375 kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') { 376 if (binary) 377 err = kgdb_ebin2mem(ptr, (char *)addr, length); 378 else 379 err = kgdb_hex2mem(ptr, (char *)addr, length); 380 if (err) 381 return err; 382 if (CACHE_FLUSH_IS_SAFE) 383 flush_icache_range(addr, addr + length); 384 return 0; 385 } 386 387 return -EINVAL; 388} 389 390static void error_packet(char *pkt, int error) 391{ 392 error = -error; 393 pkt[0] = 'E'; 394 pkt[1] = hex_asc[(error / 10)]; 395 pkt[2] = hex_asc[(error % 10)]; 396 pkt[3] = '\0'; 397} 398 399/* 400 * Thread ID accessors. We represent a flat TID space to GDB, where 401 * the per CPU idle threads (which under Linux all have PID 0) are 402 * remapped to negative TIDs. 403 */ 404 405#define BUF_THREAD_ID_SIZE 8 406 407static char *pack_threadid(char *pkt, unsigned char *id) 408{ 409 unsigned char *limit; 410 int lzero = 1; 411 412 limit = id + (BUF_THREAD_ID_SIZE / 2); 413 while (id < limit) { 414 if (!lzero || *id != 0) { 415 pkt = hex_byte_pack(pkt, *id); 416 lzero = 0; 417 } 418 id++; 419 } 420 421 if (lzero) 422 pkt = hex_byte_pack(pkt, 0); 423 424 return pkt; 425} 426 427static void int_to_threadref(unsigned char *id, int value) 428{ 429 put_unaligned_be32(value, id); 430} 431 432static struct task_struct *getthread(struct pt_regs *regs, int tid) 433{ 434 /* 435 * Non-positive TIDs are remapped to the cpu shadow information 436 */ 437 if (tid == 0 || tid == -1) 438 tid = -atomic_read(&kgdb_active) - 2; 439 if (tid < -1 && tid > -NR_CPUS - 2) { 440 if (kgdb_info[-tid - 2].task) 441 return kgdb_info[-tid - 2].task; 442 else 443 return idle_task(-tid - 2); 444 } 445 if (tid <= 0) { 446 printk(KERN_ERR "KGDB: Internal thread select error\n"); 447 dump_stack(); 448 return NULL; 449 } 450 451 /* 452 * find_task_by_pid_ns() does not take the tasklist lock anymore 453 * but is nicely RCU locked - hence is a pretty resilient 454 * thing to use: 455 */ 456 return find_task_by_pid_ns(tid, &init_pid_ns); 457} 458 459 460/* 461 * Remap normal tasks to their real PID, 462 * CPU shadow threads are mapped to -CPU - 2 463 */ 464static inline int shadow_pid(int realpid) 465{ 466 if (realpid) 467 return realpid; 468 469 return -raw_smp_processor_id() - 2; 470} 471 472/* 473 * All the functions that start with gdb_cmd are the various 474 * operations to implement the handlers for the gdbserial protocol 475 * where KGDB is communicating with an external debugger 476 */ 477 478/* Handle the '?' status packets */ 479static void gdb_cmd_status(struct kgdb_state *ks) 480{ 481 /* 482 * We know that this packet is only sent 483 * during initial connect. So to be safe, 484 * we clear out our breakpoints now in case 485 * GDB is reconnecting. 486 */ 487 dbg_remove_all_break(); 488 489 remcom_out_buffer[0] = 'S'; 490 hex_byte_pack(&remcom_out_buffer[1], ks->signo); 491} 492 493static void gdb_get_regs_helper(struct kgdb_state *ks) 494{ 495 struct task_struct *thread; 496 void *local_debuggerinfo; 497 int i; 498 499 thread = kgdb_usethread; 500 if (!thread) { 501 thread = kgdb_info[ks->cpu].task; 502 local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo; 503 } else { 504 local_debuggerinfo = NULL; 505 for_each_online_cpu(i) { 506 /* 507 * Try to find the task on some other 508 * or possibly this node if we do not 509 * find the matching task then we try 510 * to approximate the results. 511 */ 512 if (thread == kgdb_info[i].task) 513 local_debuggerinfo = kgdb_info[i].debuggerinfo; 514 } 515 } 516 517 /* 518 * All threads that don't have debuggerinfo should be 519 * in schedule() sleeping, since all other CPUs 520 * are in kgdb_wait, and thus have debuggerinfo. 521 */ 522 if (local_debuggerinfo) { 523 pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo); 524 } else { 525 /* 526 * Pull stuff saved during switch_to; nothing 527 * else is accessible (or even particularly 528 * relevant). 529 * 530 * This should be enough for a stack trace. 531 */ 532 sleeping_thread_to_gdb_regs(gdb_regs, thread); 533 } 534} 535 536/* Handle the 'g' get registers request */ 537static void gdb_cmd_getregs(struct kgdb_state *ks) 538{ 539 gdb_get_regs_helper(ks); 540 kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES); 541} 542 543/* Handle the 'G' set registers request */ 544static void gdb_cmd_setregs(struct kgdb_state *ks) 545{ 546 kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES); 547 548 if (kgdb_usethread && kgdb_usethread != current) { 549 error_packet(remcom_out_buffer, -EINVAL); 550 } else { 551 gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs); 552 strcpy(remcom_out_buffer, "OK"); 553 } 554} 555 556/* Handle the 'm' memory read bytes */ 557static void gdb_cmd_memread(struct kgdb_state *ks) 558{ 559 char *ptr = &remcom_in_buffer[1]; 560 unsigned long length; 561 unsigned long addr; 562 char *err; 563 564 if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' && 565 kgdb_hex2long(&ptr, &length) > 0) { 566 err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length); 567 if (!err) 568 error_packet(remcom_out_buffer, -EINVAL); 569 } else { 570 error_packet(remcom_out_buffer, -EINVAL); 571 } 572} 573 574/* Handle the 'M' memory write bytes */ 575static void gdb_cmd_memwrite(struct kgdb_state *ks) 576{ 577 int err = write_mem_msg(0); 578 579 if (err) 580 error_packet(remcom_out_buffer, err); 581 else 582 strcpy(remcom_out_buffer, "OK"); 583} 584 585#if DBG_MAX_REG_NUM > 0 586static char *gdb_hex_reg_helper(int regnum, char *out) 587{ 588 int i; 589 int offset = 0; 590 591 for (i = 0; i < regnum; i++) 592 offset += dbg_reg_def[i].size; 593 return kgdb_mem2hex((char *)gdb_regs + offset, out, 594 dbg_reg_def[i].size); 595} 596 597/* Handle the 'p' individual regster get */ 598static void gdb_cmd_reg_get(struct kgdb_state *ks) 599{ 600 unsigned long regnum; 601 char *ptr = &remcom_in_buffer[1]; 602 603 kgdb_hex2long(&ptr, ®num); 604 if (regnum >= DBG_MAX_REG_NUM) { 605 error_packet(remcom_out_buffer, -EINVAL); 606 return; 607 } 608 gdb_get_regs_helper(ks); 609 gdb_hex_reg_helper(regnum, remcom_out_buffer); 610} 611 612/* Handle the 'P' individual regster set */ 613static void gdb_cmd_reg_set(struct kgdb_state *ks) 614{ 615 unsigned long regnum; 616 char *ptr = &remcom_in_buffer[1]; 617 int i = 0; 618 619 kgdb_hex2long(&ptr, ®num); 620 if (*ptr++ != '=' || 621 !(!kgdb_usethread || kgdb_usethread == current) || 622 !dbg_get_reg(regnum, gdb_regs, ks->linux_regs)) { 623 error_packet(remcom_out_buffer, -EINVAL); 624 return; 625 } 626 memset(gdb_regs, 0, sizeof(gdb_regs)); 627 while (i < sizeof(gdb_regs) * 2) 628 if (hex_to_bin(ptr[i]) >= 0) 629 i++; 630 else 631 break; 632 i = i / 2; 633 kgdb_hex2mem(ptr, (char *)gdb_regs, i); 634 dbg_set_reg(regnum, gdb_regs, ks->linux_regs); 635 strcpy(remcom_out_buffer, "OK"); 636} 637#endif /* DBG_MAX_REG_NUM > 0 */ 638 639/* Handle the 'X' memory binary write bytes */ 640static void gdb_cmd_binwrite(struct kgdb_state *ks) 641{ 642 int err = write_mem_msg(1); 643 644 if (err) 645 error_packet(remcom_out_buffer, err); 646 else 647 strcpy(remcom_out_buffer, "OK"); 648} 649 650/* Handle the 'D' or 'k', detach or kill packets */ 651static void gdb_cmd_detachkill(struct kgdb_state *ks) 652{ 653 int error; 654 655 /* The detach case */ 656 if (remcom_in_buffer[0] == 'D') { 657 error = dbg_remove_all_break(); 658 if (error < 0) { 659 error_packet(remcom_out_buffer, error); 660 } else { 661 strcpy(remcom_out_buffer, "OK"); 662 kgdb_connected = 0; 663 } 664 put_packet(remcom_out_buffer); 665 } else { 666 /* 667 * Assume the kill case, with no exit code checking, 668 * trying to force detach the debugger: 669 */ 670 dbg_remove_all_break(); 671 kgdb_connected = 0; 672 } 673} 674 675/* Handle the 'R' reboot packets */ 676static int gdb_cmd_reboot(struct kgdb_state *ks) 677{ 678 /* For now, only honor R0 */ 679 if (strcmp(remcom_in_buffer, "R0") == 0) { 680 printk(KERN_CRIT "Executing emergency reboot\n"); 681 strcpy(remcom_out_buffer, "OK"); 682 put_packet(remcom_out_buffer); 683 684 /* 685 * Execution should not return from 686 * machine_emergency_restart() 687 */ 688 machine_emergency_restart(); 689 kgdb_connected = 0; 690 691 return 1; 692 } 693 return 0; 694} 695 696/* Handle the 'q' query packets */ 697static void gdb_cmd_query(struct kgdb_state *ks) 698{ 699 struct task_struct *g; 700 struct task_struct *p; 701 unsigned char thref[BUF_THREAD_ID_SIZE]; 702 char *ptr; 703 int i; 704 int cpu; 705 int finished = 0; 706 707 switch (remcom_in_buffer[1]) { 708 case 's': 709 case 'f': 710 if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) 711 break; 712 713 i = 0; 714 remcom_out_buffer[0] = 'm'; 715 ptr = remcom_out_buffer + 1; 716 if (remcom_in_buffer[1] == 'f') { 717 /* Each cpu is a shadow thread */ 718 for_each_online_cpu(cpu) { 719 ks->thr_query = 0; 720 int_to_threadref(thref, -cpu - 2); 721 ptr = pack_threadid(ptr, thref); 722 *(ptr++) = ','; 723 i++; 724 } 725 } 726 727 do_each_thread(g, p) { 728 if (i >= ks->thr_query && !finished) { 729 int_to_threadref(thref, p->pid); 730 ptr = pack_threadid(ptr, thref); 731 *(ptr++) = ','; 732 ks->thr_query++; 733 if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0) 734 finished = 1; 735 } 736 i++; 737 } while_each_thread(g, p); 738 739 *(--ptr) = '\0'; 740 break; 741 742 case 'C': 743 /* Current thread id */ 744 strcpy(remcom_out_buffer, "QC"); 745 ks->threadid = shadow_pid(current->pid); 746 int_to_threadref(thref, ks->threadid); 747 pack_threadid(remcom_out_buffer + 2, thref); 748 break; 749 case 'T': 750 if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) 751 break; 752 753 ks->threadid = 0; 754 ptr = remcom_in_buffer + 17; 755 kgdb_hex2long(&ptr, &ks->threadid); 756 if (!getthread(ks->linux_regs, ks->threadid)) { 757 error_packet(remcom_out_buffer, -EINVAL); 758 break; 759 } 760 if ((int)ks->threadid > 0) { 761 kgdb_mem2hex(getthread(ks->linux_regs, 762 ks->threadid)->comm, 763 remcom_out_buffer, 16); 764 } else { 765 static char tmpstr[23 + BUF_THREAD_ID_SIZE]; 766 767 sprintf(tmpstr, "shadowCPU%d", 768 (int)(-ks->threadid - 2)); 769 kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr)); 770 } 771 break; 772#ifdef CONFIG_KGDB_KDB 773 case 'R': 774 if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) { 775 int len = strlen(remcom_in_buffer + 6); 776 777 if ((len % 2) != 0) { 778 strcpy(remcom_out_buffer, "E01"); 779 break; 780 } 781 kgdb_hex2mem(remcom_in_buffer + 6, 782 remcom_out_buffer, len); 783 len = len / 2; 784 remcom_out_buffer[len++] = 0; 785 786 kdb_common_init_state(ks); 787 kdb_parse(remcom_out_buffer); 788 kdb_common_deinit_state(); 789 790 strcpy(remcom_out_buffer, "OK"); 791 } 792 break; 793#endif 794 } 795} 796 797/* Handle the 'H' task query packets */ 798static void gdb_cmd_task(struct kgdb_state *ks) 799{ 800 struct task_struct *thread; 801 char *ptr; 802 803 switch (remcom_in_buffer[1]) { 804 case 'g': 805 ptr = &remcom_in_buffer[2]; 806 kgdb_hex2long(&ptr, &ks->threadid); 807 thread = getthread(ks->linux_regs, ks->threadid); 808 if (!thread && ks->threadid > 0) { 809 error_packet(remcom_out_buffer, -EINVAL); 810 break; 811 } 812 kgdb_usethread = thread; 813 ks->kgdb_usethreadid = ks->threadid; 814 strcpy(remcom_out_buffer, "OK"); 815 break; 816 case 'c': 817 ptr = &remcom_in_buffer[2]; 818 kgdb_hex2long(&ptr, &ks->threadid); 819 if (!ks->threadid) { 820 kgdb_contthread = NULL; 821 } else { 822 thread = getthread(ks->linux_regs, ks->threadid); 823 if (!thread && ks->threadid > 0) { 824 error_packet(remcom_out_buffer, -EINVAL); 825 break; 826 } 827 kgdb_contthread = thread; 828 } 829 strcpy(remcom_out_buffer, "OK"); 830 break; 831 } 832} 833 834/* Handle the 'T' thread query packets */ 835static void gdb_cmd_thread(struct kgdb_state *ks) 836{ 837 char *ptr = &remcom_in_buffer[1]; 838 struct task_struct *thread; 839 840 kgdb_hex2long(&ptr, &ks->threadid); 841 thread = getthread(ks->linux_regs, ks->threadid); 842 if (thread) 843 strcpy(remcom_out_buffer, "OK"); 844 else 845 error_packet(remcom_out_buffer, -EINVAL); 846} 847 848/* Handle the 'z' or 'Z' breakpoint remove or set packets */ 849static void gdb_cmd_break(struct kgdb_state *ks) 850{ 851 /* 852 * Since GDB-5.3, it's been drafted that '0' is a software 853 * breakpoint, '1' is a hardware breakpoint, so let's do that. 854 */ 855 char *bpt_type = &remcom_in_buffer[1]; 856 char *ptr = &remcom_in_buffer[2]; 857 unsigned long addr; 858 unsigned long length; 859 int error = 0; 860 861 if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') { 862 /* Unsupported */ 863 if (*bpt_type > '4') 864 return; 865 } else { 866 if (*bpt_type != '0' && *bpt_type != '1') 867 /* Unsupported. */ 868 return; 869 } 870 871 /* 872 * Test if this is a hardware breakpoint, and 873 * if we support it: 874 */ 875 if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT)) 876 /* Unsupported. */ 877 return; 878 879 if (*(ptr++) != ',') { 880 error_packet(remcom_out_buffer, -EINVAL); 881 return; 882 } 883 if (!kgdb_hex2long(&ptr, &addr)) { 884 error_packet(remcom_out_buffer, -EINVAL); 885 return; 886 } 887 if (*(ptr++) != ',' || 888 !kgdb_hex2long(&ptr, &length)) { 889 error_packet(remcom_out_buffer, -EINVAL); 890 return; 891 } 892 893 if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0') 894 error = dbg_set_sw_break(addr); 895 else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0') 896 error = dbg_remove_sw_break(addr); 897 else if (remcom_in_buffer[0] == 'Z') 898 error = arch_kgdb_ops.set_hw_breakpoint(addr, 899 (int)length, *bpt_type - '0'); 900 else if (remcom_in_buffer[0] == 'z') 901 error = arch_kgdb_ops.remove_hw_breakpoint(addr, 902 (int) length, *bpt_type - '0'); 903 904 if (error == 0) 905 strcpy(remcom_out_buffer, "OK"); 906 else 907 error_packet(remcom_out_buffer, error); 908} 909 910/* Handle the 'C' signal / exception passing packets */ 911static int gdb_cmd_exception_pass(struct kgdb_state *ks) 912{ 913 /* C09 == pass exception 914 * C15 == detach kgdb, pass exception 915 */ 916 if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') { 917 918 ks->pass_exception = 1; 919 remcom_in_buffer[0] = 'c'; 920 921 } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') { 922 923 ks->pass_exception = 1; 924 remcom_in_buffer[0] = 'D'; 925 dbg_remove_all_break(); 926 kgdb_connected = 0; 927 return 1; 928 929 } else { 930 gdbstub_msg_write("KGDB only knows signal 9 (pass)" 931 " and 15 (pass and disconnect)\n" 932 "Executing a continue without signal passing\n", 0); 933 remcom_in_buffer[0] = 'c'; 934 } 935 936 /* Indicate fall through */ 937 return -1; 938} 939 940/* 941 * This function performs all gdbserial command procesing 942 */ 943int gdb_serial_stub(struct kgdb_state *ks) 944{ 945 int error = 0; 946 int tmp; 947 948 /* Initialize comm buffer and globals. */ 949 memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); 950 kgdb_usethread = kgdb_info[ks->cpu].task; 951 ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid); 952 ks->pass_exception = 0; 953 954 if (kgdb_connected) { 955 unsigned char thref[BUF_THREAD_ID_SIZE]; 956 char *ptr; 957 958 /* Reply to host that an exception has occurred */ 959 ptr = remcom_out_buffer; 960 *ptr++ = 'T'; 961 ptr = hex_byte_pack(ptr, ks->signo); 962 ptr += strlen(strcpy(ptr, "thread:")); 963 int_to_threadref(thref, shadow_pid(current->pid)); 964 ptr = pack_threadid(ptr, thref); 965 *ptr++ = ';'; 966 put_packet(remcom_out_buffer); 967 } 968 969 while (1) { 970 error = 0; 971 972 /* Clear the out buffer. */ 973 memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); 974 975 get_packet(remcom_in_buffer); 976 977 switch (remcom_in_buffer[0]) { 978 case '?': /* gdbserial status */ 979 gdb_cmd_status(ks); 980 break; 981 case 'g': /* return the value of the CPU registers */ 982 gdb_cmd_getregs(ks); 983 break; 984 case 'G': /* set the value of the CPU registers - return OK */ 985 gdb_cmd_setregs(ks); 986 break; 987 case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ 988 gdb_cmd_memread(ks); 989 break; 990 case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */ 991 gdb_cmd_memwrite(ks); 992 break; 993#if DBG_MAX_REG_NUM > 0 994 case 'p': /* pXX Return gdb register XX (in hex) */ 995 gdb_cmd_reg_get(ks); 996 break; 997 case 'P': /* PXX=aaaa Set gdb register XX to aaaa (in hex) */ 998 gdb_cmd_reg_set(ks); 999 break; 1000#endif /* DBG_MAX_REG_NUM > 0 */ 1001 case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */ 1002 gdb_cmd_binwrite(ks); 1003 break; 1004 /* kill or detach. KGDB should treat this like a 1005 * continue. 1006 */ 1007 case 'D': /* Debugger detach */ 1008 case 'k': /* Debugger detach via kill */ 1009 gdb_cmd_detachkill(ks); 1010 goto default_handle; 1011 case 'R': /* Reboot */ 1012 if (gdb_cmd_reboot(ks)) 1013 goto default_handle; 1014 break; 1015 case 'q': /* query command */ 1016 gdb_cmd_query(ks); 1017 break; 1018 case 'H': /* task related */ 1019 gdb_cmd_task(ks); 1020 break; 1021 case 'T': /* Query thread status */ 1022 gdb_cmd_thread(ks); 1023 break; 1024 case 'z': /* Break point remove */ 1025 case 'Z': /* Break point set */ 1026 gdb_cmd_break(ks); 1027 break; 1028#ifdef CONFIG_KGDB_KDB 1029 case '3': /* Escape into back into kdb */ 1030 if (remcom_in_buffer[1] == '\0') { 1031 gdb_cmd_detachkill(ks); 1032 return DBG_PASS_EVENT; 1033 } 1034#endif 1035 case 'C': /* Exception passing */ 1036 tmp = gdb_cmd_exception_pass(ks); 1037 if (tmp > 0) 1038 goto default_handle; 1039 if (tmp == 0) 1040 break; 1041 /* Fall through on tmp < 0 */ 1042 case 'c': /* Continue packet */ 1043 case 's': /* Single step packet */ 1044 if (kgdb_contthread && kgdb_contthread != current) { 1045 /* Can't switch threads in kgdb */ 1046 error_packet(remcom_out_buffer, -EINVAL); 1047 break; 1048 } 1049 dbg_activate_sw_breakpoints(); 1050 /* Fall through to default processing */ 1051 default: 1052default_handle: 1053 error = kgdb_arch_handle_exception(ks->ex_vector, 1054 ks->signo, 1055 ks->err_code, 1056 remcom_in_buffer, 1057 remcom_out_buffer, 1058 ks->linux_regs); 1059 /* 1060 * Leave cmd processing on error, detach, 1061 * kill, continue, or single step. 1062 */ 1063 if (error >= 0 || remcom_in_buffer[0] == 'D' || 1064 remcom_in_buffer[0] == 'k') { 1065 error = 0; 1066 goto kgdb_exit; 1067 } 1068 1069 } 1070 1071 /* reply to the request */ 1072 put_packet(remcom_out_buffer); 1073 } 1074 1075kgdb_exit: 1076 if (ks->pass_exception) 1077 error = 1; 1078 return error; 1079} 1080 1081int gdbstub_state(struct kgdb_state *ks, char *cmd) 1082{ 1083 int error; 1084 1085 switch (cmd[0]) { 1086 case 'e': 1087 error = kgdb_arch_handle_exception(ks->ex_vector, 1088 ks->signo, 1089 ks->err_code, 1090 remcom_in_buffer, 1091 remcom_out_buffer, 1092 ks->linux_regs); 1093 return error; 1094 case 's': 1095 case 'c': 1096 strcpy(remcom_in_buffer, cmd); 1097 return 0; 1098 case '$': 1099 strcpy(remcom_in_buffer, cmd); 1100 gdbstub_use_prev_in_buf = strlen(remcom_in_buffer); 1101 gdbstub_prev_in_buf_pos = 0; 1102 return 0; 1103 } 1104 dbg_io_ops->write_char('+'); 1105 put_packet(remcom_out_buffer); 1106 return 0; 1107} 1108 1109/** 1110 * gdbstub_exit - Send an exit message to GDB 1111 * @status: The exit code to report. 1112 */ 1113void gdbstub_exit(int status) 1114{ 1115 unsigned char checksum, ch, buffer[3]; 1116 int loop; 1117 1118 if (!kgdb_connected) 1119 return; 1120 kgdb_connected = 0; 1121 1122 if (!dbg_io_ops || dbg_kdb_mode) 1123 return; 1124 1125 buffer[0] = 'W'; 1126 buffer[1] = hex_asc_hi(status); 1127 buffer[2] = hex_asc_lo(status); 1128 1129 dbg_io_ops->write_char('$'); 1130 checksum = 0; 1131 1132 for (loop = 0; loop < 3; loop++) { 1133 ch = buffer[loop]; 1134 checksum += ch; 1135 dbg_io_ops->write_char(ch); 1136 } 1137 1138 dbg_io_ops->write_char('#'); 1139 dbg_io_ops->write_char(hex_asc_hi(checksum)); 1140 dbg_io_ops->write_char(hex_asc_lo(checksum)); 1141 1142 /* make sure the output is flushed, lest the bootloader clobber it */ 1143 if (dbg_io_ops->flush) 1144 dbg_io_ops->flush(); 1145} 1146