1/* atmdev.h - ATM device driver declarations and various related items */
2#ifndef LINUX_ATMDEV_H
3#define LINUX_ATMDEV_H
4
5
6#include <linux/wait.h> /* wait_queue_head_t */
7#include <linux/time.h> /* struct timeval */
8#include <linux/net.h>
9#include <linux/bug.h>
10#include <linux/skbuff.h> /* struct sk_buff */
11#include <linux/uio.h>
12#include <net/sock.h>
13#include <linux/atomic.h>
14#include <uapi/linux/atmdev.h>
15
16#ifdef CONFIG_PROC_FS
17#include <linux/proc_fs.h>
18
19extern struct proc_dir_entry *atm_proc_root;
20#endif
21
22#ifdef CONFIG_COMPAT
23#include <linux/compat.h>
24struct compat_atm_iobuf {
25	int length;
26	compat_uptr_t buffer;
27};
28#endif
29
30struct k_atm_aal_stats {
31#define __HANDLE_ITEM(i) atomic_t i
32	__AAL_STAT_ITEMS
33#undef __HANDLE_ITEM
34};
35
36
37struct k_atm_dev_stats {
38	struct k_atm_aal_stats aal0;
39	struct k_atm_aal_stats aal34;
40	struct k_atm_aal_stats aal5;
41};
42
43struct device;
44
45enum {
46	ATM_VF_ADDR,		/* Address is in use. Set by anybody, cleared
47				   by device driver. */
48	ATM_VF_READY,		/* VC is ready to transfer data. Set by device
49				   driver, cleared by anybody. */
50	ATM_VF_PARTIAL,		/* resources are bound to PVC (partial PVC
51				   setup), controlled by socket layer */
52	ATM_VF_REGIS,		/* registered with demon, controlled by SVC
53				   socket layer */
54	ATM_VF_BOUND,		/* local SAP is set, controlled by SVC socket
55				   layer */
56	ATM_VF_RELEASED,	/* demon has indicated/requested release,
57				   controlled by SVC socket layer */
58	ATM_VF_HASQOS,		/* QOS parameters have been set */
59	ATM_VF_LISTEN,		/* socket is used for listening */
60	ATM_VF_META,		/* SVC socket isn't used for normal data
61				   traffic and doesn't depend on signaling
62				   to be available */
63	ATM_VF_SESSION,		/* VCC is p2mp session control descriptor */
64	ATM_VF_HASSAP,		/* SAP has been set */
65	ATM_VF_CLOSE,		/* asynchronous close - treat like VF_RELEASED*/
66	ATM_VF_WAITING,		/* waiting for reply from sigd */
67	ATM_VF_IS_CLIP,		/* in use by CLIP protocol */
68};
69
70
71#define ATM_VF2VS(flags) \
72    (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
73     test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
74     test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
75     test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
76     test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
77
78
79enum {
80	ATM_DF_REMOVED,		/* device was removed from atm_devs list */
81};
82
83
84#define ATM_PHY_SIG_LOST    0	/* no carrier/light */
85#define ATM_PHY_SIG_UNKNOWN 1	/* carrier/light status is unknown */
86#define ATM_PHY_SIG_FOUND   2	/* carrier/light okay */
87
88#define ATM_ATMOPT_CLP	1	/* set CLP bit */
89
90struct atm_vcc {
91	/* struct sock has to be the first member of atm_vcc */
92	struct sock	sk;
93	unsigned long	flags;		/* VCC flags (ATM_VF_*) */
94	short		vpi;		/* VPI and VCI (types must be equal */
95					/* with sockaddr) */
96	int 		vci;
97	unsigned long	aal_options;	/* AAL layer options */
98	unsigned long	atm_options;	/* ATM layer options */
99	struct atm_dev	*dev;		/* device back pointer */
100	struct atm_qos	qos;		/* QOS */
101	struct atm_sap	sap;		/* SAP */
102	void (*release_cb)(struct atm_vcc *vcc); /* release_sock callback */
103	void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
104	void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
105	int (*push_oam)(struct atm_vcc *vcc,void *cell);
106	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
107	void		*dev_data;	/* per-device data */
108	void		*proto_data;	/* per-protocol data */
109	struct k_atm_aal_stats *stats;	/* pointer to AAL stats group */
110	struct module *owner;		/* owner of ->push function */
111	/* SVC part --- may move later ------------------------------------- */
112	short		itf;		/* interface number */
113	struct sockaddr_atmsvc local;
114	struct sockaddr_atmsvc remote;
115	/* Multipoint part ------------------------------------------------- */
116	struct atm_vcc	*session;	/* session VCC descriptor */
117	/* Other stuff ----------------------------------------------------- */
118	void		*user_back;	/* user backlink - not touched by */
119					/* native ATM stack. Currently used */
120					/* by CLIP and sch_atm. */
121};
122
123static inline struct atm_vcc *atm_sk(struct sock *sk)
124{
125	return (struct atm_vcc *)sk;
126}
127
128static inline struct atm_vcc *ATM_SD(struct socket *sock)
129{
130	return atm_sk(sock->sk);
131}
132
133static inline struct sock *sk_atm(struct atm_vcc *vcc)
134{
135	return (struct sock *)vcc;
136}
137
138struct atm_dev_addr {
139	struct sockaddr_atmsvc addr;	/* ATM address */
140	struct list_head entry;		/* next address */
141};
142
143enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS };
144
145struct atm_dev {
146	const struct atmdev_ops *ops;	/* device operations; NULL if unused */
147	const struct atmphy_ops *phy;	/* PHY operations, may be undefined */
148					/* (NULL) */
149	const char	*type;		/* device type name */
150	int		number;		/* device index */
151	void		*dev_data;	/* per-device data */
152	void		*phy_data;	/* private PHY date */
153	unsigned long	flags;		/* device flags (ATM_DF_*) */
154	struct list_head local;		/* local ATM addresses */
155	struct list_head lecs;		/* LECS ATM addresses learned via ILMI */
156	unsigned char	esi[ESI_LEN];	/* ESI ("MAC" addr) */
157	struct atm_cirange ci_range;	/* VPI/VCI range */
158	struct k_atm_dev_stats stats;	/* statistics */
159	char		signal;		/* signal status (ATM_PHY_SIG_*) */
160	int		link_rate;	/* link rate (default: OC3) */
161	atomic_t	refcnt;		/* reference count */
162	spinlock_t	lock;		/* protect internal members */
163#ifdef CONFIG_PROC_FS
164	struct proc_dir_entry *proc_entry; /* proc entry */
165	char *proc_name;		/* proc entry name */
166#endif
167	struct device class_dev;	/* sysfs device */
168	struct list_head dev_list;	/* linkage */
169};
170
171
172/* OF: send_Oam Flags */
173
174#define ATM_OF_IMMED  1		/* Attempt immediate delivery */
175#define ATM_OF_INRATE 2		/* Attempt in-rate delivery */
176
177
178/*
179 * ioctl, getsockopt, and setsockopt are optional and can be set to NULL.
180 */
181
182struct atmdev_ops { /* only send is required */
183	void (*dev_close)(struct atm_dev *dev);
184	int (*open)(struct atm_vcc *vcc);
185	void (*close)(struct atm_vcc *vcc);
186	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
187#ifdef CONFIG_COMPAT
188	int (*compat_ioctl)(struct atm_dev *dev,unsigned int cmd,
189			    void __user *arg);
190#endif
191	int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
192	    void __user *optval,int optlen);
193	int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
194	    void __user *optval,unsigned int optlen);
195	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
196	int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
197	void (*phy_put)(struct atm_dev *dev,unsigned char value,
198	    unsigned long addr);
199	unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
200	int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
201	int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
202	struct module *owner;
203};
204
205struct atmphy_ops {
206	int (*start)(struct atm_dev *dev);
207	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
208	void (*interrupt)(struct atm_dev *dev);
209	int (*stop)(struct atm_dev *dev);
210};
211
212struct atm_skb_data {
213	struct atm_vcc	*vcc;		/* ATM VCC */
214	unsigned long	atm_options;	/* ATM layer options */
215};
216
217#define VCC_HTABLE_SIZE 32
218
219extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
220extern rwlock_t vcc_sklist_lock;
221
222#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
223
224struct atm_dev *atm_dev_register(const char *type, struct device *parent,
225				 const struct atmdev_ops *ops,
226				 int number, /* -1 == pick first available */
227				 unsigned long *flags);
228struct atm_dev *atm_dev_lookup(int number);
229void atm_dev_deregister(struct atm_dev *dev);
230
231/* atm_dev_signal_change
232 *
233 * Propagate lower layer signal change in atm_dev->signal to netdevice.
234 * The event will be sent via a notifier call chain.
235 */
236void atm_dev_signal_change(struct atm_dev *dev, char signal);
237
238void vcc_insert_socket(struct sock *sk);
239
240void atm_dev_release_vccs(struct atm_dev *dev);
241
242
243static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
244{
245	atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc);
246}
247
248
249static inline void atm_return(struct atm_vcc *vcc,int truesize)
250{
251	atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc);
252}
253
254
255static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
256{
257	return (size + atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) <
258	       sk_atm(vcc)->sk_sndbuf;
259}
260
261
262static inline void atm_dev_hold(struct atm_dev *dev)
263{
264	atomic_inc(&dev->refcnt);
265}
266
267
268static inline void atm_dev_put(struct atm_dev *dev)
269{
270	if (atomic_dec_and_test(&dev->refcnt)) {
271		BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags));
272		if (dev->ops->dev_close)
273			dev->ops->dev_close(dev);
274		put_device(&dev->class_dev);
275	}
276}
277
278
279int atm_charge(struct atm_vcc *vcc,int truesize);
280struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
281    gfp_t gfp_flags);
282int atm_pcr_goal(const struct atm_trafprm *tp);
283
284void vcc_release_async(struct atm_vcc *vcc, int reply);
285
286struct atm_ioctl {
287	struct module *owner;
288	/* A module reference is kept if appropriate over this call.
289	 * Return -ENOIOCTLCMD if you don't handle it. */
290	int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg);
291	struct list_head list;
292};
293
294/**
295 * register_atm_ioctl - register handler for ioctl operations
296 *
297 * Special (non-device) handlers of ioctl's should
298 * register here. If you're a normal device, you should
299 * set .ioctl in your atmdev_ops instead.
300 */
301void register_atm_ioctl(struct atm_ioctl *);
302
303/**
304 * deregister_atm_ioctl - remove the ioctl handler
305 */
306void deregister_atm_ioctl(struct atm_ioctl *);
307
308
309/* register_atmdevice_notifier - register atm_dev notify events
310 *
311 * Clients like br2684 will register notify events
312 * Currently we notify of signal found/lost
313 */
314int register_atmdevice_notifier(struct notifier_block *nb);
315void unregister_atmdevice_notifier(struct notifier_block *nb);
316
317#endif
318