1/* 2 * HP300 Topcat framebuffer support (derived from macfb of all things) 3 * Phil Blundell <philb@gnu.org> 1998 4 * DIO-II, colour map and Catseye support by 5 * Kars de Jong <jongk@linux-m68k.org>, May 2004. 6 */ 7 8#include <linux/module.h> 9#include <linux/kernel.h> 10#include <linux/errno.h> 11#include <linux/string.h> 12#include <linux/mm.h> 13#include <linux/delay.h> 14#include <linux/init.h> 15#include <linux/fb.h> 16#include <linux/dio.h> 17 18#include <asm/io.h> 19#include <asm/uaccess.h> 20 21static struct fb_info fb_info = { 22 .fix = { 23 .id = "HP300 ", 24 .type = FB_TYPE_PACKED_PIXELS, 25 .visual = FB_VISUAL_PSEUDOCOLOR, 26 .accel = FB_ACCEL_NONE, 27 } 28}; 29 30static unsigned long fb_regs; 31static unsigned char fb_bitmask; 32 33#define TC_NBLANK 0x4080 34#define TC_WEN 0x4088 35#define TC_REN 0x408c 36#define TC_FBEN 0x4090 37#define TC_PRR 0x40ea 38 39/* These defines match the X window system */ 40#define RR_CLEAR 0x0 41#define RR_COPY 0x3 42#define RR_NOOP 0x5 43#define RR_XOR 0x6 44#define RR_INVERT 0xa 45#define RR_COPYINVERTED 0xc 46#define RR_SET 0xf 47 48/* blitter regs */ 49#define BUSY 0x4044 50#define WMRR 0x40ef 51#define SOURCE_X 0x40f2 52#define SOURCE_Y 0x40f6 53#define DEST_X 0x40fa 54#define DEST_Y 0x40fe 55#define WHEIGHT 0x4106 56#define WWIDTH 0x4102 57#define WMOVE 0x409c 58 59static struct fb_var_screeninfo hpfb_defined = { 60 .red = { 61 .length = 8, 62 }, 63 .green = { 64 .length = 8, 65 }, 66 .blue = { 67 .length = 8, 68 }, 69 .activate = FB_ACTIVATE_NOW, 70 .height = -1, 71 .width = -1, 72 .vmode = FB_VMODE_NONINTERLACED, 73}; 74 75static int hpfb_setcolreg(unsigned regno, unsigned red, unsigned green, 76 unsigned blue, unsigned transp, 77 struct fb_info *info) 78{ 79 /* use MSBs */ 80 unsigned char _red =red>>8; 81 unsigned char _green=green>>8; 82 unsigned char _blue =blue>>8; 83 unsigned char _regno=regno; 84 85 /* 86 * Set a single color register. The values supplied are 87 * already rounded down to the hardware's capabilities 88 * (according to the entries in the `var' structure). Return 89 * != 0 for invalid regno. 90 */ 91 92 if (regno >= info->cmap.len) 93 return 1; 94 95 while (in_be16(fb_regs + 0x6002) & 0x4) udelay(1); 96 97 out_be16(fb_regs + 0x60ba, 0xff); 98 99 out_be16(fb_regs + 0x60b2, _red); 100 out_be16(fb_regs + 0x60b4, _green); 101 out_be16(fb_regs + 0x60b6, _blue); 102 out_be16(fb_regs + 0x60b8, ~_regno); 103 out_be16(fb_regs + 0x60f0, 0xff); 104 105 udelay(100); 106 107 while (in_be16(fb_regs + 0x6002) & 0x4) udelay(1); 108 out_be16(fb_regs + 0x60b2, 0); 109 out_be16(fb_regs + 0x60b4, 0); 110 out_be16(fb_regs + 0x60b6, 0); 111 out_be16(fb_regs + 0x60b8, 0); 112 113 return 0; 114} 115 116/* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */ 117 118static int hpfb_blank(int blank, struct fb_info *info) 119{ 120 out_8(fb_regs + TC_NBLANK, (blank ? 0x00 : fb_bitmask)); 121 122 return 0; 123} 124 125static void topcat_blit(int x0, int y0, int x1, int y1, int w, int h, int rr) 126{ 127 if (rr >= 0) { 128 while (in_8(fb_regs + BUSY) & fb_bitmask) 129 ; 130 } 131 out_8(fb_regs + TC_FBEN, fb_bitmask); 132 if (rr >= 0) { 133 out_8(fb_regs + TC_WEN, fb_bitmask); 134 out_8(fb_regs + WMRR, rr); 135 } 136 out_be16(fb_regs + SOURCE_X, x0); 137 out_be16(fb_regs + SOURCE_Y, y0); 138 out_be16(fb_regs + DEST_X, x1); 139 out_be16(fb_regs + DEST_Y, y1); 140 out_be16(fb_regs + WWIDTH, w); 141 out_be16(fb_regs + WHEIGHT, h); 142 out_8(fb_regs + WMOVE, fb_bitmask); 143} 144 145static void hpfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) 146{ 147 topcat_blit(area->sx, area->sy, area->dx, area->dy, area->width, area->height, RR_COPY); 148} 149 150static void hpfb_fillrect(struct fb_info *p, const struct fb_fillrect *region) 151{ 152 u8 clr; 153 154 clr = region->color & 0xff; 155 156 while (in_8(fb_regs + BUSY) & fb_bitmask) 157 ; 158 159 /* Foreground */ 160 out_8(fb_regs + TC_WEN, fb_bitmask & clr); 161 out_8(fb_regs + WMRR, (region->rop == ROP_COPY ? RR_SET : RR_INVERT)); 162 163 /* Background */ 164 out_8(fb_regs + TC_WEN, fb_bitmask & ~clr); 165 out_8(fb_regs + WMRR, (region->rop == ROP_COPY ? RR_CLEAR : RR_NOOP)); 166 167 topcat_blit(region->dx, region->dy, region->dx, region->dy, region->width, region->height, -1); 168} 169 170static int hpfb_sync(struct fb_info *info) 171{ 172 /* 173 * Since we also access the framebuffer directly, we have to wait 174 * until the block mover is finished 175 */ 176 while (in_8(fb_regs + BUSY) & fb_bitmask) 177 ; 178 179 out_8(fb_regs + TC_WEN, fb_bitmask); 180 out_8(fb_regs + TC_PRR, RR_COPY); 181 out_8(fb_regs + TC_FBEN, fb_bitmask); 182 183 return 0; 184} 185 186static struct fb_ops hpfb_ops = { 187 .owner = THIS_MODULE, 188 .fb_setcolreg = hpfb_setcolreg, 189 .fb_blank = hpfb_blank, 190 .fb_fillrect = hpfb_fillrect, 191 .fb_copyarea = hpfb_copyarea, 192 .fb_imageblit = cfb_imageblit, 193 .fb_sync = hpfb_sync, 194}; 195 196/* Common to all HP framebuffers */ 197#define HPFB_FBWMSB 0x05 /* Frame buffer width */ 198#define HPFB_FBWLSB 0x07 199#define HPFB_FBHMSB 0x09 /* Frame buffer height */ 200#define HPFB_FBHLSB 0x0b 201#define HPFB_DWMSB 0x0d /* Display width */ 202#define HPFB_DWLSB 0x0f 203#define HPFB_DHMSB 0x11 /* Display height */ 204#define HPFB_DHLSB 0x13 205#define HPFB_NUMPLANES 0x5b /* Number of colour planes */ 206#define HPFB_FBOMSB 0x5d /* Frame buffer offset */ 207#define HPFB_FBOLSB 0x5f 208 209static int hpfb_init_one(unsigned long phys_base, unsigned long virt_base) 210{ 211 unsigned long fboff, fb_width, fb_height, fb_start; 212 int ret; 213 214 fb_regs = virt_base; 215 fboff = (in_8(fb_regs + HPFB_FBOMSB) << 8) | in_8(fb_regs + HPFB_FBOLSB); 216 217 fb_info.fix.smem_start = (in_8(fb_regs + fboff) << 16); 218 219 if (phys_base >= DIOII_BASE) { 220 fb_info.fix.smem_start += phys_base; 221 } 222 223 if (DIO_SECID(fb_regs) != DIO_ID2_TOPCAT) { 224 /* This is the magic incantation the HP X server uses to make Catseye boards work. */ 225 while (in_be16(fb_regs+0x4800) & 1) 226 ; 227 out_be16(fb_regs+0x4800, 0); /* Catseye status */ 228 out_be16(fb_regs+0x4510, 0); /* VB */ 229 out_be16(fb_regs+0x4512, 0); /* TCNTRL */ 230 out_be16(fb_regs+0x4514, 0); /* ACNTRL */ 231 out_be16(fb_regs+0x4516, 0); /* PNCNTRL */ 232 out_be16(fb_regs+0x4206, 0x90); /* RUG Command/Status */ 233 out_be16(fb_regs+0x60a2, 0); /* Overlay Mask */ 234 out_be16(fb_regs+0x60bc, 0); /* Ram Select */ 235 } 236 237 /* 238 * Fill in the available video resolution 239 */ 240 fb_width = (in_8(fb_regs + HPFB_FBWMSB) << 8) | in_8(fb_regs + HPFB_FBWLSB); 241 fb_info.fix.line_length = fb_width; 242 fb_height = (in_8(fb_regs + HPFB_FBHMSB) << 8) | in_8(fb_regs + HPFB_FBHLSB); 243 fb_info.fix.smem_len = fb_width * fb_height; 244 fb_start = (unsigned long)ioremap_writethrough(fb_info.fix.smem_start, 245 fb_info.fix.smem_len); 246 hpfb_defined.xres = (in_8(fb_regs + HPFB_DWMSB) << 8) | in_8(fb_regs + HPFB_DWLSB); 247 hpfb_defined.yres = (in_8(fb_regs + HPFB_DHMSB) << 8) | in_8(fb_regs + HPFB_DHLSB); 248 hpfb_defined.xres_virtual = hpfb_defined.xres; 249 hpfb_defined.yres_virtual = hpfb_defined.yres; 250 hpfb_defined.bits_per_pixel = in_8(fb_regs + HPFB_NUMPLANES); 251 252 printk(KERN_INFO "hpfb: framebuffer at 0x%lx, mapped to 0x%lx, size %dk\n", 253 fb_info.fix.smem_start, fb_start, fb_info.fix.smem_len/1024); 254 printk(KERN_INFO "hpfb: mode is %dx%dx%d, linelength=%d\n", 255 hpfb_defined.xres, hpfb_defined.yres, hpfb_defined.bits_per_pixel, fb_info.fix.line_length); 256 257 /* 258 * Give the hardware a bit of a prod and work out how many bits per 259 * pixel are supported. 260 */ 261 out_8(fb_regs + TC_WEN, 0xff); 262 out_8(fb_regs + TC_PRR, RR_COPY); 263 out_8(fb_regs + TC_FBEN, 0xff); 264 out_8(fb_start, 0xff); 265 fb_bitmask = in_8(fb_start); 266 out_8(fb_start, 0); 267 268 /* 269 * Enable reading/writing of all the planes. 270 */ 271 out_8(fb_regs + TC_WEN, fb_bitmask); 272 out_8(fb_regs + TC_PRR, RR_COPY); 273 out_8(fb_regs + TC_REN, fb_bitmask); 274 out_8(fb_regs + TC_FBEN, fb_bitmask); 275 276 /* 277 * Clear the screen. 278 */ 279 topcat_blit(0, 0, 0, 0, fb_width, fb_height, RR_CLEAR); 280 281 /* 282 * Let there be consoles.. 283 */ 284 if (DIO_SECID(fb_regs) == DIO_ID2_TOPCAT) 285 strcat(fb_info.fix.id, "Topcat"); 286 else 287 strcat(fb_info.fix.id, "Catseye"); 288 fb_info.fbops = &hpfb_ops; 289 fb_info.flags = FBINFO_DEFAULT; 290 fb_info.var = hpfb_defined; 291 fb_info.screen_base = (char *)fb_start; 292 293 ret = fb_alloc_cmap(&fb_info.cmap, 1 << hpfb_defined.bits_per_pixel, 0); 294 if (ret < 0) 295 goto unmap_screen_base; 296 297 ret = register_framebuffer(&fb_info); 298 if (ret < 0) 299 goto dealloc_cmap; 300 301 fb_info(&fb_info, "%s frame buffer device\n", fb_info.fix.id); 302 303 return 0; 304 305dealloc_cmap: 306 fb_dealloc_cmap(&fb_info.cmap); 307 308unmap_screen_base: 309 if (fb_info.screen_base) { 310 iounmap(fb_info.screen_base); 311 fb_info.screen_base = NULL; 312 } 313 314 return ret; 315} 316 317/* 318 * Check that the secondary ID indicates that we have some hope of working with this 319 * framebuffer. The catseye boards are pretty much like topcats and we can muddle through. 320 */ 321 322#define topcat_sid_ok(x) (((x) == DIO_ID2_LRCATSEYE) || ((x) == DIO_ID2_HRCCATSEYE) \ 323 || ((x) == DIO_ID2_HRMCATSEYE) || ((x) == DIO_ID2_TOPCAT)) 324 325/* 326 * Initialise the framebuffer 327 */ 328static int hpfb_dio_probe(struct dio_dev *d, const struct dio_device_id *ent) 329{ 330 unsigned long paddr, vaddr; 331 332 paddr = d->resource.start; 333 if (!request_mem_region(d->resource.start, resource_size(&d->resource), d->name)) 334 return -EBUSY; 335 336 if (d->scode >= DIOII_SCBASE) { 337 vaddr = (unsigned long)ioremap(paddr, resource_size(&d->resource)); 338 } else { 339 vaddr = paddr + DIO_VIRADDRBASE; 340 } 341 printk(KERN_INFO "Topcat found at DIO select code %d " 342 "(secondary id %02x)\n", d->scode, (d->id >> 8) & 0xff); 343 if (hpfb_init_one(paddr, vaddr)) { 344 if (d->scode >= DIOII_SCBASE) 345 iounmap((void *)vaddr); 346 return -ENOMEM; 347 } 348 return 0; 349} 350 351static void hpfb_remove_one(struct dio_dev *d) 352{ 353 unregister_framebuffer(&fb_info); 354 if (d->scode >= DIOII_SCBASE) 355 iounmap((void *)fb_regs); 356 release_mem_region(d->resource.start, resource_size(&d->resource)); 357 fb_dealloc_cmap(&fb_info.cmap); 358 if (fb_info.screen_base) 359 iounmap(fb_info.screen_base); 360} 361 362static struct dio_device_id hpfb_dio_tbl[] = { 363 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_LRCATSEYE) }, 364 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_HRCCATSEYE) }, 365 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_HRMCATSEYE) }, 366 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_TOPCAT) }, 367 { 0 } 368}; 369 370static struct dio_driver hpfb_driver = { 371 .name = "hpfb", 372 .id_table = hpfb_dio_tbl, 373 .probe = hpfb_dio_probe, 374 .remove = hpfb_remove_one, 375}; 376 377int __init hpfb_init(void) 378{ 379 unsigned int sid; 380 mm_segment_t fs; 381 unsigned char i; 382 int err; 383 384 /* Topcats can be on the internal IO bus or real DIO devices. 385 * The internal variant sits at 0x560000; it has primary 386 * and secondary ID registers just like the DIO version. 387 * So we merge the two detection routines. 388 * 389 * Perhaps this #define should be in a global header file: 390 * I believe it's common to all internal fbs, not just topcat. 391 */ 392#define INTFBVADDR 0xf0560000 393#define INTFBPADDR 0x560000 394 395 if (!MACH_IS_HP300) 396 return -ENODEV; 397 398 if (fb_get_options("hpfb", NULL)) 399 return -ENODEV; 400 401 err = dio_register_driver(&hpfb_driver); 402 if (err) 403 return err; 404 405 fs = get_fs(); 406 set_fs(KERNEL_DS); 407 err = get_user(i, (unsigned char *)INTFBVADDR + DIO_IDOFF); 408 set_fs(fs); 409 410 if (!err && (i == DIO_ID_FBUFFER) && topcat_sid_ok(sid = DIO_SECID(INTFBVADDR))) { 411 if (!request_mem_region(INTFBPADDR, DIO_DEVSIZE, "Internal Topcat")) 412 return -EBUSY; 413 printk(KERN_INFO "Internal Topcat found (secondary id %02x)\n", sid); 414 if (hpfb_init_one(INTFBPADDR, INTFBVADDR)) { 415 return -ENOMEM; 416 } 417 } 418 return 0; 419} 420 421void __exit hpfb_cleanup_module(void) 422{ 423 dio_unregister_driver(&hpfb_driver); 424} 425 426module_init(hpfb_init); 427module_exit(hpfb_cleanup_module); 428 429MODULE_LICENSE("GPL"); 430