1/* 2 * USB ConnectTech WhiteHEAT driver 3 * 4 * Copyright (C) 2002 5 * Connect Tech Inc. 6 * 7 * Copyright (C) 1999 - 2001 8 * Greg Kroah-Hartman (greg@kroah.com) 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * See Documentation/usb/usb-serial.txt for more information on using this 16 * driver 17 */ 18 19#include <linux/kernel.h> 20#include <linux/errno.h> 21#include <linux/slab.h> 22#include <linux/tty.h> 23#include <linux/tty_driver.h> 24#include <linux/tty_flip.h> 25#include <linux/module.h> 26#include <linux/spinlock.h> 27#include <linux/mutex.h> 28#include <linux/uaccess.h> 29#include <asm/termbits.h> 30#include <linux/usb.h> 31#include <linux/serial_reg.h> 32#include <linux/serial.h> 33#include <linux/usb/serial.h> 34#include <linux/usb/ezusb.h> 35#include "whiteheat.h" /* WhiteHEAT specific commands */ 36 37#ifndef CMSPAR 38#define CMSPAR 0 39#endif 40 41/* 42 * Version Information 43 */ 44#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>" 45#define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" 46 47#define CONNECT_TECH_VENDOR_ID 0x0710 48#define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001 49#define CONNECT_TECH_WHITE_HEAT_ID 0x8001 50 51/* 52 ID tables for whiteheat are unusual, because we want to different 53 things for different versions of the device. Eventually, this 54 will be doable from a single table. But, for now, we define two 55 separate ID tables, and then a third table that combines them 56 just for the purpose of exporting the autoloading information. 57*/ 58static const struct usb_device_id id_table_std[] = { 59 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, 60 { } /* Terminating entry */ 61}; 62 63static const struct usb_device_id id_table_prerenumeration[] = { 64 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, 65 { } /* Terminating entry */ 66}; 67 68static const struct usb_device_id id_table_combined[] = { 69 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, 70 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, 71 { } /* Terminating entry */ 72}; 73 74MODULE_DEVICE_TABLE(usb, id_table_combined); 75 76 77/* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ 78static int whiteheat_firmware_download(struct usb_serial *serial, 79 const struct usb_device_id *id); 80static int whiteheat_firmware_attach(struct usb_serial *serial); 81 82/* function prototypes for the Connect Tech WhiteHEAT serial converter */ 83static int whiteheat_probe(struct usb_serial *serial, 84 const struct usb_device_id *id); 85static int whiteheat_attach(struct usb_serial *serial); 86static void whiteheat_release(struct usb_serial *serial); 87static int whiteheat_port_probe(struct usb_serial_port *port); 88static int whiteheat_port_remove(struct usb_serial_port *port); 89static int whiteheat_open(struct tty_struct *tty, 90 struct usb_serial_port *port); 91static void whiteheat_close(struct usb_serial_port *port); 92static int whiteheat_ioctl(struct tty_struct *tty, 93 unsigned int cmd, unsigned long arg); 94static void whiteheat_set_termios(struct tty_struct *tty, 95 struct usb_serial_port *port, struct ktermios *old); 96static int whiteheat_tiocmget(struct tty_struct *tty); 97static int whiteheat_tiocmset(struct tty_struct *tty, 98 unsigned int set, unsigned int clear); 99static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); 100 101static struct usb_serial_driver whiteheat_fake_device = { 102 .driver = { 103 .owner = THIS_MODULE, 104 .name = "whiteheatnofirm", 105 }, 106 .description = "Connect Tech - WhiteHEAT - (prerenumeration)", 107 .id_table = id_table_prerenumeration, 108 .num_ports = 1, 109 .probe = whiteheat_firmware_download, 110 .attach = whiteheat_firmware_attach, 111}; 112 113static struct usb_serial_driver whiteheat_device = { 114 .driver = { 115 .owner = THIS_MODULE, 116 .name = "whiteheat", 117 }, 118 .description = "Connect Tech - WhiteHEAT", 119 .id_table = id_table_std, 120 .num_ports = 4, 121 .probe = whiteheat_probe, 122 .attach = whiteheat_attach, 123 .release = whiteheat_release, 124 .port_probe = whiteheat_port_probe, 125 .port_remove = whiteheat_port_remove, 126 .open = whiteheat_open, 127 .close = whiteheat_close, 128 .ioctl = whiteheat_ioctl, 129 .set_termios = whiteheat_set_termios, 130 .break_ctl = whiteheat_break_ctl, 131 .tiocmget = whiteheat_tiocmget, 132 .tiocmset = whiteheat_tiocmset, 133 .throttle = usb_serial_generic_throttle, 134 .unthrottle = usb_serial_generic_unthrottle, 135}; 136 137static struct usb_serial_driver * const serial_drivers[] = { 138 &whiteheat_fake_device, &whiteheat_device, NULL 139}; 140 141struct whiteheat_command_private { 142 struct mutex mutex; 143 __u8 port_running; 144 __u8 command_finished; 145 wait_queue_head_t wait_command; /* for handling sleeping whilst 146 waiting for a command to 147 finish */ 148 __u8 result_buffer[64]; 149}; 150 151struct whiteheat_private { 152 __u8 mcr; /* FIXME: no locking on mcr */ 153}; 154 155 156/* local function prototypes */ 157static int start_command_port(struct usb_serial *serial); 158static void stop_command_port(struct usb_serial *serial); 159static void command_port_write_callback(struct urb *urb); 160static void command_port_read_callback(struct urb *urb); 161 162static int firm_send_command(struct usb_serial_port *port, __u8 command, 163 __u8 *data, __u8 datasize); 164static int firm_open(struct usb_serial_port *port); 165static int firm_close(struct usb_serial_port *port); 166static void firm_setup_port(struct tty_struct *tty); 167static int firm_set_rts(struct usb_serial_port *port, __u8 onoff); 168static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff); 169static int firm_set_break(struct usb_serial_port *port, __u8 onoff); 170static int firm_purge(struct usb_serial_port *port, __u8 rxtx); 171static int firm_get_dtr_rts(struct usb_serial_port *port); 172static int firm_report_tx_done(struct usb_serial_port *port); 173 174 175#define COMMAND_PORT 4 176#define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */ 177#define COMMAND_TIMEOUT_MS 2000 178#define CLOSING_DELAY (30 * HZ) 179 180 181/***************************************************************************** 182 * Connect Tech's White Heat prerenumeration driver functions 183 *****************************************************************************/ 184 185/* steps to download the firmware to the WhiteHEAT device: 186 - hold the reset (by writing to the reset bit of the CPUCS register) 187 - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD 188 - release the reset (by writing to the CPUCS register) 189 - download the WH.HEX file for all addresses greater than 0x1b3f using 190 VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD 191 - hold the reset 192 - download the WH.HEX file for all addresses less than 0x1b40 using 193 VENDOR_REQUEST_ANCHOR_LOAD 194 - release the reset 195 - device renumerated itself and comes up as new device id with all 196 firmware download completed. 197*/ 198static int whiteheat_firmware_download(struct usb_serial *serial, 199 const struct usb_device_id *id) 200{ 201 int response; 202 203 response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw"); 204 if (response >= 0) { 205 response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw"); 206 if (response >= 0) 207 return 0; 208 } 209 return -ENOENT; 210} 211 212 213static int whiteheat_firmware_attach(struct usb_serial *serial) 214{ 215 /* We want this device to fail to have a driver assigned to it */ 216 return 1; 217} 218 219 220/***************************************************************************** 221 * Connect Tech's White Heat serial driver functions 222 *****************************************************************************/ 223 224static int whiteheat_probe(struct usb_serial *serial, 225 const struct usb_device_id *id) 226{ 227 struct usb_host_interface *iface_desc; 228 struct usb_endpoint_descriptor *endpoint; 229 size_t num_bulk_in = 0; 230 size_t num_bulk_out = 0; 231 size_t min_num_bulk; 232 unsigned int i; 233 234 iface_desc = serial->interface->cur_altsetting; 235 236 for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { 237 endpoint = &iface_desc->endpoint[i].desc; 238 if (usb_endpoint_is_bulk_in(endpoint)) 239 ++num_bulk_in; 240 if (usb_endpoint_is_bulk_out(endpoint)) 241 ++num_bulk_out; 242 } 243 244 min_num_bulk = COMMAND_PORT + 1; 245 if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk) 246 return -ENODEV; 247 248 return 0; 249} 250 251static int whiteheat_attach(struct usb_serial *serial) 252{ 253 struct usb_serial_port *command_port; 254 struct whiteheat_command_private *command_info; 255 struct whiteheat_hw_info *hw_info; 256 int pipe; 257 int ret; 258 int alen; 259 __u8 *command; 260 __u8 *result; 261 262 command_port = serial->port[COMMAND_PORT]; 263 264 pipe = usb_sndbulkpipe(serial->dev, 265 command_port->bulk_out_endpointAddress); 266 command = kmalloc(2, GFP_KERNEL); 267 if (!command) 268 goto no_command_buffer; 269 command[0] = WHITEHEAT_GET_HW_INFO; 270 command[1] = 0; 271 272 result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL); 273 if (!result) 274 goto no_result_buffer; 275 /* 276 * When the module is reloaded the firmware is still there and 277 * the endpoints are still in the usb core unchanged. This is the 278 * unlinking bug in disguise. Same for the call below. 279 */ 280 usb_clear_halt(serial->dev, pipe); 281 ret = usb_bulk_msg(serial->dev, pipe, command, 2, 282 &alen, COMMAND_TIMEOUT_MS); 283 if (ret) { 284 dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n", 285 serial->type->description, ret); 286 goto no_firmware; 287 } else if (alen != 2) { 288 dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n", 289 serial->type->description, alen); 290 goto no_firmware; 291 } 292 293 pipe = usb_rcvbulkpipe(serial->dev, 294 command_port->bulk_in_endpointAddress); 295 /* See the comment on the usb_clear_halt() above */ 296 usb_clear_halt(serial->dev, pipe); 297 ret = usb_bulk_msg(serial->dev, pipe, result, 298 sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); 299 if (ret) { 300 dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n", 301 serial->type->description, ret); 302 goto no_firmware; 303 } else if (alen != sizeof(*hw_info) + 1) { 304 dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n", 305 serial->type->description, alen); 306 goto no_firmware; 307 } else if (result[0] != command[0]) { 308 dev_err(&serial->dev->dev, "%s: Command failed [%d]\n", 309 serial->type->description, result[0]); 310 goto no_firmware; 311 } 312 313 hw_info = (struct whiteheat_hw_info *)&result[1]; 314 315 dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n", 316 serial->type->description, 317 hw_info->sw_major_rev, hw_info->sw_minor_rev); 318 319 command_info = kmalloc(sizeof(struct whiteheat_command_private), 320 GFP_KERNEL); 321 if (!command_info) 322 goto no_command_private; 323 324 mutex_init(&command_info->mutex); 325 command_info->port_running = 0; 326 init_waitqueue_head(&command_info->wait_command); 327 usb_set_serial_port_data(command_port, command_info); 328 command_port->write_urb->complete = command_port_write_callback; 329 command_port->read_urb->complete = command_port_read_callback; 330 kfree(result); 331 kfree(command); 332 333 return 0; 334 335no_firmware: 336 /* Firmware likely not running */ 337 dev_err(&serial->dev->dev, 338 "%s: Unable to retrieve firmware version, try replugging\n", 339 serial->type->description); 340 dev_err(&serial->dev->dev, 341 "%s: If the firmware is not running (status led not blinking)\n", 342 serial->type->description); 343 dev_err(&serial->dev->dev, 344 "%s: please contact support@connecttech.com\n", 345 serial->type->description); 346 kfree(result); 347 kfree(command); 348 return -ENODEV; 349 350no_command_private: 351 kfree(result); 352no_result_buffer: 353 kfree(command); 354no_command_buffer: 355 return -ENOMEM; 356} 357 358static void whiteheat_release(struct usb_serial *serial) 359{ 360 struct usb_serial_port *command_port; 361 362 /* free up our private data for our command port */ 363 command_port = serial->port[COMMAND_PORT]; 364 kfree(usb_get_serial_port_data(command_port)); 365} 366 367static int whiteheat_port_probe(struct usb_serial_port *port) 368{ 369 struct whiteheat_private *info; 370 371 info = kzalloc(sizeof(*info), GFP_KERNEL); 372 if (!info) 373 return -ENOMEM; 374 375 usb_set_serial_port_data(port, info); 376 377 return 0; 378} 379 380static int whiteheat_port_remove(struct usb_serial_port *port) 381{ 382 struct whiteheat_private *info; 383 384 info = usb_get_serial_port_data(port); 385 kfree(info); 386 387 return 0; 388} 389 390static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) 391{ 392 int retval; 393 394 retval = start_command_port(port->serial); 395 if (retval) 396 goto exit; 397 398 /* send an open port command */ 399 retval = firm_open(port); 400 if (retval) { 401 stop_command_port(port->serial); 402 goto exit; 403 } 404 405 retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX); 406 if (retval) { 407 firm_close(port); 408 stop_command_port(port->serial); 409 goto exit; 410 } 411 412 if (tty) 413 firm_setup_port(tty); 414 415 /* Work around HCD bugs */ 416 usb_clear_halt(port->serial->dev, port->read_urb->pipe); 417 usb_clear_halt(port->serial->dev, port->write_urb->pipe); 418 419 retval = usb_serial_generic_open(tty, port); 420 if (retval) { 421 firm_close(port); 422 stop_command_port(port->serial); 423 goto exit; 424 } 425exit: 426 return retval; 427} 428 429 430static void whiteheat_close(struct usb_serial_port *port) 431{ 432 firm_report_tx_done(port); 433 firm_close(port); 434 435 usb_serial_generic_close(port); 436 437 stop_command_port(port->serial); 438} 439 440static int whiteheat_tiocmget(struct tty_struct *tty) 441{ 442 struct usb_serial_port *port = tty->driver_data; 443 struct whiteheat_private *info = usb_get_serial_port_data(port); 444 unsigned int modem_signals = 0; 445 446 firm_get_dtr_rts(port); 447 if (info->mcr & UART_MCR_DTR) 448 modem_signals |= TIOCM_DTR; 449 if (info->mcr & UART_MCR_RTS) 450 modem_signals |= TIOCM_RTS; 451 452 return modem_signals; 453} 454 455static int whiteheat_tiocmset(struct tty_struct *tty, 456 unsigned int set, unsigned int clear) 457{ 458 struct usb_serial_port *port = tty->driver_data; 459 struct whiteheat_private *info = usb_get_serial_port_data(port); 460 461 if (set & TIOCM_RTS) 462 info->mcr |= UART_MCR_RTS; 463 if (set & TIOCM_DTR) 464 info->mcr |= UART_MCR_DTR; 465 466 if (clear & TIOCM_RTS) 467 info->mcr &= ~UART_MCR_RTS; 468 if (clear & TIOCM_DTR) 469 info->mcr &= ~UART_MCR_DTR; 470 471 firm_set_dtr(port, info->mcr & UART_MCR_DTR); 472 firm_set_rts(port, info->mcr & UART_MCR_RTS); 473 return 0; 474} 475 476 477static int whiteheat_ioctl(struct tty_struct *tty, 478 unsigned int cmd, unsigned long arg) 479{ 480 struct usb_serial_port *port = tty->driver_data; 481 struct serial_struct serstruct; 482 void __user *user_arg = (void __user *)arg; 483 484 switch (cmd) { 485 case TIOCGSERIAL: 486 memset(&serstruct, 0, sizeof(serstruct)); 487 serstruct.type = PORT_16654; 488 serstruct.line = port->minor; 489 serstruct.port = port->port_number; 490 serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; 491 serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo); 492 serstruct.custom_divisor = 0; 493 serstruct.baud_base = 460800; 494 serstruct.close_delay = CLOSING_DELAY; 495 serstruct.closing_wait = CLOSING_DELAY; 496 497 if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) 498 return -EFAULT; 499 break; 500 default: 501 break; 502 } 503 504 return -ENOIOCTLCMD; 505} 506 507 508static void whiteheat_set_termios(struct tty_struct *tty, 509 struct usb_serial_port *port, struct ktermios *old_termios) 510{ 511 firm_setup_port(tty); 512} 513 514static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) 515{ 516 struct usb_serial_port *port = tty->driver_data; 517 firm_set_break(port, break_state); 518} 519 520 521/***************************************************************************** 522 * Connect Tech's White Heat callback routines 523 *****************************************************************************/ 524static void command_port_write_callback(struct urb *urb) 525{ 526 int status = urb->status; 527 528 if (status) { 529 dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status); 530 return; 531 } 532} 533 534 535static void command_port_read_callback(struct urb *urb) 536{ 537 struct usb_serial_port *command_port = urb->context; 538 struct whiteheat_command_private *command_info; 539 int status = urb->status; 540 unsigned char *data = urb->transfer_buffer; 541 int result; 542 543 command_info = usb_get_serial_port_data(command_port); 544 if (!command_info) { 545 dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__); 546 return; 547 } 548 if (!urb->actual_length) { 549 dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__); 550 return; 551 } 552 if (status) { 553 dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status); 554 if (status != -ENOENT) 555 command_info->command_finished = WHITEHEAT_CMD_FAILURE; 556 wake_up(&command_info->wait_command); 557 return; 558 } 559 560 usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data); 561 562 if (data[0] == WHITEHEAT_CMD_COMPLETE) { 563 command_info->command_finished = WHITEHEAT_CMD_COMPLETE; 564 wake_up(&command_info->wait_command); 565 } else if (data[0] == WHITEHEAT_CMD_FAILURE) { 566 command_info->command_finished = WHITEHEAT_CMD_FAILURE; 567 wake_up(&command_info->wait_command); 568 } else if (data[0] == WHITEHEAT_EVENT) { 569 /* These are unsolicited reports from the firmware, hence no 570 waiting command to wakeup */ 571 dev_dbg(&urb->dev->dev, "%s - event received\n", __func__); 572 } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) && 573 (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) { 574 memcpy(command_info->result_buffer, &data[1], 575 urb->actual_length - 1); 576 command_info->command_finished = WHITEHEAT_CMD_COMPLETE; 577 wake_up(&command_info->wait_command); 578 } else 579 dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__); 580 581 /* Continue trying to always read */ 582 result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); 583 if (result) 584 dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", 585 __func__, result); 586} 587 588 589/***************************************************************************** 590 * Connect Tech's White Heat firmware interface 591 *****************************************************************************/ 592static int firm_send_command(struct usb_serial_port *port, __u8 command, 593 __u8 *data, __u8 datasize) 594{ 595 struct usb_serial_port *command_port; 596 struct whiteheat_command_private *command_info; 597 struct whiteheat_private *info; 598 struct device *dev = &port->dev; 599 __u8 *transfer_buffer; 600 int retval = 0; 601 int t; 602 603 dev_dbg(dev, "%s - command %d\n", __func__, command); 604 605 command_port = port->serial->port[COMMAND_PORT]; 606 command_info = usb_get_serial_port_data(command_port); 607 mutex_lock(&command_info->mutex); 608 command_info->command_finished = false; 609 610 transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; 611 transfer_buffer[0] = command; 612 memcpy(&transfer_buffer[1], data, datasize); 613 command_port->write_urb->transfer_buffer_length = datasize + 1; 614 retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); 615 if (retval) { 616 dev_dbg(dev, "%s - submit urb failed\n", __func__); 617 goto exit; 618 } 619 620 /* wait for the command to complete */ 621 t = wait_event_timeout(command_info->wait_command, 622 (bool)command_info->command_finished, COMMAND_TIMEOUT); 623 if (!t) 624 usb_kill_urb(command_port->write_urb); 625 626 if (command_info->command_finished == false) { 627 dev_dbg(dev, "%s - command timed out.\n", __func__); 628 retval = -ETIMEDOUT; 629 goto exit; 630 } 631 632 if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { 633 dev_dbg(dev, "%s - command failed.\n", __func__); 634 retval = -EIO; 635 goto exit; 636 } 637 638 if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { 639 dev_dbg(dev, "%s - command completed.\n", __func__); 640 switch (command) { 641 case WHITEHEAT_GET_DTR_RTS: 642 info = usb_get_serial_port_data(port); 643 memcpy(&info->mcr, command_info->result_buffer, 644 sizeof(struct whiteheat_dr_info)); 645 break; 646 } 647 } 648exit: 649 mutex_unlock(&command_info->mutex); 650 return retval; 651} 652 653 654static int firm_open(struct usb_serial_port *port) 655{ 656 struct whiteheat_simple open_command; 657 658 open_command.port = port->port_number + 1; 659 return firm_send_command(port, WHITEHEAT_OPEN, 660 (__u8 *)&open_command, sizeof(open_command)); 661} 662 663 664static int firm_close(struct usb_serial_port *port) 665{ 666 struct whiteheat_simple close_command; 667 668 close_command.port = port->port_number + 1; 669 return firm_send_command(port, WHITEHEAT_CLOSE, 670 (__u8 *)&close_command, sizeof(close_command)); 671} 672 673 674static void firm_setup_port(struct tty_struct *tty) 675{ 676 struct usb_serial_port *port = tty->driver_data; 677 struct device *dev = &port->dev; 678 struct whiteheat_port_settings port_settings; 679 unsigned int cflag = tty->termios.c_cflag; 680 681 port_settings.port = port->port_number + 1; 682 683 /* get the byte size */ 684 switch (cflag & CSIZE) { 685 case CS5: port_settings.bits = 5; break; 686 case CS6: port_settings.bits = 6; break; 687 case CS7: port_settings.bits = 7; break; 688 default: 689 case CS8: port_settings.bits = 8; break; 690 } 691 dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits); 692 693 /* determine the parity */ 694 if (cflag & PARENB) 695 if (cflag & CMSPAR) 696 if (cflag & PARODD) 697 port_settings.parity = WHITEHEAT_PAR_MARK; 698 else 699 port_settings.parity = WHITEHEAT_PAR_SPACE; 700 else 701 if (cflag & PARODD) 702 port_settings.parity = WHITEHEAT_PAR_ODD; 703 else 704 port_settings.parity = WHITEHEAT_PAR_EVEN; 705 else 706 port_settings.parity = WHITEHEAT_PAR_NONE; 707 dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity); 708 709 /* figure out the stop bits requested */ 710 if (cflag & CSTOPB) 711 port_settings.stop = 2; 712 else 713 port_settings.stop = 1; 714 dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop); 715 716 /* figure out the flow control settings */ 717 if (cflag & CRTSCTS) 718 port_settings.hflow = (WHITEHEAT_HFLOW_CTS | 719 WHITEHEAT_HFLOW_RTS); 720 else 721 port_settings.hflow = WHITEHEAT_HFLOW_NONE; 722 dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__, 723 (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", 724 (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", 725 (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", 726 (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : ""); 727 728 /* determine software flow control */ 729 if (I_IXOFF(tty)) 730 port_settings.sflow = WHITEHEAT_SFLOW_RXTX; 731 else 732 port_settings.sflow = WHITEHEAT_SFLOW_NONE; 733 dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow); 734 735 port_settings.xon = START_CHAR(tty); 736 port_settings.xoff = STOP_CHAR(tty); 737 dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); 738 739 /* get the baud rate wanted */ 740 port_settings.baud = tty_get_baud_rate(tty); 741 dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud); 742 743 /* fixme: should set validated settings */ 744 tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); 745 /* handle any settings that aren't specified in the tty structure */ 746 port_settings.lloop = 0; 747 748 /* now send the message to the device */ 749 firm_send_command(port, WHITEHEAT_SETUP_PORT, 750 (__u8 *)&port_settings, sizeof(port_settings)); 751} 752 753 754static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) 755{ 756 struct whiteheat_set_rdb rts_command; 757 758 rts_command.port = port->port_number + 1; 759 rts_command.state = onoff; 760 return firm_send_command(port, WHITEHEAT_SET_RTS, 761 (__u8 *)&rts_command, sizeof(rts_command)); 762} 763 764 765static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) 766{ 767 struct whiteheat_set_rdb dtr_command; 768 769 dtr_command.port = port->port_number + 1; 770 dtr_command.state = onoff; 771 return firm_send_command(port, WHITEHEAT_SET_DTR, 772 (__u8 *)&dtr_command, sizeof(dtr_command)); 773} 774 775 776static int firm_set_break(struct usb_serial_port *port, __u8 onoff) 777{ 778 struct whiteheat_set_rdb break_command; 779 780 break_command.port = port->port_number + 1; 781 break_command.state = onoff; 782 return firm_send_command(port, WHITEHEAT_SET_BREAK, 783 (__u8 *)&break_command, sizeof(break_command)); 784} 785 786 787static int firm_purge(struct usb_serial_port *port, __u8 rxtx) 788{ 789 struct whiteheat_purge purge_command; 790 791 purge_command.port = port->port_number + 1; 792 purge_command.what = rxtx; 793 return firm_send_command(port, WHITEHEAT_PURGE, 794 (__u8 *)&purge_command, sizeof(purge_command)); 795} 796 797 798static int firm_get_dtr_rts(struct usb_serial_port *port) 799{ 800 struct whiteheat_simple get_dr_command; 801 802 get_dr_command.port = port->port_number + 1; 803 return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, 804 (__u8 *)&get_dr_command, sizeof(get_dr_command)); 805} 806 807 808static int firm_report_tx_done(struct usb_serial_port *port) 809{ 810 struct whiteheat_simple close_command; 811 812 close_command.port = port->port_number + 1; 813 return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, 814 (__u8 *)&close_command, sizeof(close_command)); 815} 816 817 818/***************************************************************************** 819 * Connect Tech's White Heat utility functions 820 *****************************************************************************/ 821static int start_command_port(struct usb_serial *serial) 822{ 823 struct usb_serial_port *command_port; 824 struct whiteheat_command_private *command_info; 825 int retval = 0; 826 827 command_port = serial->port[COMMAND_PORT]; 828 command_info = usb_get_serial_port_data(command_port); 829 mutex_lock(&command_info->mutex); 830 if (!command_info->port_running) { 831 /* Work around HCD bugs */ 832 usb_clear_halt(serial->dev, command_port->read_urb->pipe); 833 834 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); 835 if (retval) { 836 dev_err(&serial->dev->dev, 837 "%s - failed submitting read urb, error %d\n", 838 __func__, retval); 839 goto exit; 840 } 841 } 842 command_info->port_running++; 843 844exit: 845 mutex_unlock(&command_info->mutex); 846 return retval; 847} 848 849 850static void stop_command_port(struct usb_serial *serial) 851{ 852 struct usb_serial_port *command_port; 853 struct whiteheat_command_private *command_info; 854 855 command_port = serial->port[COMMAND_PORT]; 856 command_info = usb_get_serial_port_data(command_port); 857 mutex_lock(&command_info->mutex); 858 command_info->port_running--; 859 if (!command_info->port_running) 860 usb_kill_urb(command_port->read_urb); 861 mutex_unlock(&command_info->mutex); 862} 863 864module_usb_serial_driver(serial_drivers, id_table_combined); 865 866MODULE_AUTHOR(DRIVER_AUTHOR); 867MODULE_DESCRIPTION(DRIVER_DESC); 868MODULE_LICENSE("GPL"); 869 870MODULE_FIRMWARE("whiteheat.fw"); 871MODULE_FIRMWARE("whiteheat_loader.fw"); 872