1/* 2 Keyspan USB to Serial Converter driver 3 4 (C) Copyright (C) 2000-2001 Hugh Blemings <hugh@blemings.org> 5 (C) Copyright (C) 2002 Greg Kroah-Hartman <greg@kroah.com> 6 7 This program is free software; you can redistribute it and/or modify 8 it under the terms of the GNU General Public License as published by 9 the Free Software Foundation; either version 2 of the License, or 10 (at your option) any later version. 11 12 See http://blemings.org/hugh/keyspan.html for more information. 13 14 Code in this driver inspired by and in a number of places taken 15 from Brian Warner's original Keyspan-PDA driver. 16 17 This driver has been put together with the support of Innosys, Inc. 18 and Keyspan, Inc the manufacturers of the Keyspan USB-serial products. 19 Thanks Guys :) 20 21 Thanks to Paulus for miscellaneous tidy ups, some largish chunks 22 of much nicer and/or completely new code and (perhaps most uniquely) 23 having the patience to sit down and explain why and where he'd changed 24 stuff. 25 26 Tip 'o the hat to IBM (and previously Linuxcare :) for supporting 27 staff in their work on open source projects. 28*/ 29 30 31#include <linux/kernel.h> 32#include <linux/jiffies.h> 33#include <linux/errno.h> 34#include <linux/slab.h> 35#include <linux/tty.h> 36#include <linux/tty_driver.h> 37#include <linux/tty_flip.h> 38#include <linux/module.h> 39#include <linux/spinlock.h> 40#include <linux/uaccess.h> 41#include <linux/usb.h> 42#include <linux/usb/serial.h> 43#include <linux/usb/ezusb.h> 44#include "keyspan.h" 45 46#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu" 47#define DRIVER_DESC "Keyspan USB to Serial Converter Driver" 48 49#define INSTAT_BUFLEN 32 50#define GLOCONT_BUFLEN 64 51#define INDAT49W_BUFLEN 512 52#define IN_BUFLEN 64 53#define OUT_BUFLEN 64 54#define INACK_BUFLEN 1 55#define OUTCONT_BUFLEN 64 56 57 /* Per device and per port private data */ 58struct keyspan_serial_private { 59 const struct keyspan_device_details *device_details; 60 61 struct urb *instat_urb; 62 char *instat_buf; 63 64 /* added to support 49wg, where data from all 4 ports comes in 65 on 1 EP and high-speed supported */ 66 struct urb *indat_urb; 67 char *indat_buf; 68 69 /* XXX this one probably will need a lock */ 70 struct urb *glocont_urb; 71 char *glocont_buf; 72 char *ctrl_buf; /* for EP0 control message */ 73}; 74 75struct keyspan_port_private { 76 /* Keep track of which input & output endpoints to use */ 77 int in_flip; 78 int out_flip; 79 80 /* Keep duplicate of device details in each port 81 structure as well - simplifies some of the 82 callback functions etc. */ 83 const struct keyspan_device_details *device_details; 84 85 /* Input endpoints and buffer for this port */ 86 struct urb *in_urbs[2]; 87 char *in_buffer[2]; 88 /* Output endpoints and buffer for this port */ 89 struct urb *out_urbs[2]; 90 char *out_buffer[2]; 91 92 /* Input ack endpoint */ 93 struct urb *inack_urb; 94 char *inack_buffer; 95 96 /* Output control endpoint */ 97 struct urb *outcont_urb; 98 char *outcont_buffer; 99 100 /* Settings for the port */ 101 int baud; 102 int old_baud; 103 unsigned int cflag; 104 unsigned int old_cflag; 105 enum {flow_none, flow_cts, flow_xon} flow_control; 106 int rts_state; /* Handshaking pins (outputs) */ 107 int dtr_state; 108 int cts_state; /* Handshaking pins (inputs) */ 109 int dsr_state; 110 int dcd_state; 111 int ri_state; 112 int break_on; 113 114 unsigned long tx_start_time[2]; 115 int resend_cont; /* need to resend control packet */ 116}; 117 118/* Include Keyspan message headers. All current Keyspan Adapters 119 make use of one of five message formats which are referred 120 to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and 121 within this driver. */ 122#include "keyspan_usa26msg.h" 123#include "keyspan_usa28msg.h" 124#include "keyspan_usa49msg.h" 125#include "keyspan_usa90msg.h" 126#include "keyspan_usa67msg.h" 127 128 129module_usb_serial_driver(serial_drivers, keyspan_ids_combined); 130 131static void keyspan_break_ctl(struct tty_struct *tty, int break_state) 132{ 133 struct usb_serial_port *port = tty->driver_data; 134 struct keyspan_port_private *p_priv; 135 136 p_priv = usb_get_serial_port_data(port); 137 138 if (break_state == -1) 139 p_priv->break_on = 1; 140 else 141 p_priv->break_on = 0; 142 143 keyspan_send_setup(port, 0); 144} 145 146 147static void keyspan_set_termios(struct tty_struct *tty, 148 struct usb_serial_port *port, struct ktermios *old_termios) 149{ 150 int baud_rate, device_port; 151 struct keyspan_port_private *p_priv; 152 const struct keyspan_device_details *d_details; 153 unsigned int cflag; 154 155 p_priv = usb_get_serial_port_data(port); 156 d_details = p_priv->device_details; 157 cflag = tty->termios.c_cflag; 158 device_port = port->port_number; 159 160 /* Baud rate calculation takes baud rate as an integer 161 so other rates can be generated if desired. */ 162 baud_rate = tty_get_baud_rate(tty); 163 /* If no match or invalid, don't change */ 164 if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, 165 NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { 166 /* FIXME - more to do here to ensure rate changes cleanly */ 167 /* FIXME - calculate exact rate from divisor ? */ 168 p_priv->baud = baud_rate; 169 } else 170 baud_rate = tty_termios_baud_rate(old_termios); 171 172 tty_encode_baud_rate(tty, baud_rate, baud_rate); 173 /* set CTS/RTS handshake etc. */ 174 p_priv->cflag = cflag; 175 p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none; 176 177 /* Mark/Space not supported */ 178 tty->termios.c_cflag &= ~CMSPAR; 179 180 keyspan_send_setup(port, 0); 181} 182 183static int keyspan_tiocmget(struct tty_struct *tty) 184{ 185 struct usb_serial_port *port = tty->driver_data; 186 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); 187 unsigned int value; 188 189 value = ((p_priv->rts_state) ? TIOCM_RTS : 0) | 190 ((p_priv->dtr_state) ? TIOCM_DTR : 0) | 191 ((p_priv->cts_state) ? TIOCM_CTS : 0) | 192 ((p_priv->dsr_state) ? TIOCM_DSR : 0) | 193 ((p_priv->dcd_state) ? TIOCM_CAR : 0) | 194 ((p_priv->ri_state) ? TIOCM_RNG : 0); 195 196 return value; 197} 198 199static int keyspan_tiocmset(struct tty_struct *tty, 200 unsigned int set, unsigned int clear) 201{ 202 struct usb_serial_port *port = tty->driver_data; 203 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); 204 205 if (set & TIOCM_RTS) 206 p_priv->rts_state = 1; 207 if (set & TIOCM_DTR) 208 p_priv->dtr_state = 1; 209 if (clear & TIOCM_RTS) 210 p_priv->rts_state = 0; 211 if (clear & TIOCM_DTR) 212 p_priv->dtr_state = 0; 213 keyspan_send_setup(port, 0); 214 return 0; 215} 216 217/* Write function is similar for the four protocols used 218 with only a minor change for usa90 (usa19hs) required */ 219static int keyspan_write(struct tty_struct *tty, 220 struct usb_serial_port *port, const unsigned char *buf, int count) 221{ 222 struct keyspan_port_private *p_priv; 223 const struct keyspan_device_details *d_details; 224 int flip; 225 int left, todo; 226 struct urb *this_urb; 227 int err, maxDataLen, dataOffset; 228 229 p_priv = usb_get_serial_port_data(port); 230 d_details = p_priv->device_details; 231 232 if (d_details->msg_format == msg_usa90) { 233 maxDataLen = 64; 234 dataOffset = 0; 235 } else { 236 maxDataLen = 63; 237 dataOffset = 1; 238 } 239 240 dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count, 241 p_priv->out_flip); 242 243 for (left = count; left > 0; left -= todo) { 244 todo = left; 245 if (todo > maxDataLen) 246 todo = maxDataLen; 247 248 flip = p_priv->out_flip; 249 250 /* Check we have a valid urb/endpoint before we use it... */ 251 this_urb = p_priv->out_urbs[flip]; 252 if (this_urb == NULL) { 253 /* no bulk out, so return 0 bytes written */ 254 dev_dbg(&port->dev, "%s - no output urb :(\n", __func__); 255 return count; 256 } 257 258 dev_dbg(&port->dev, "%s - endpoint %d flip %d\n", 259 __func__, usb_pipeendpoint(this_urb->pipe), flip); 260 261 if (this_urb->status == -EINPROGRESS) { 262 if (time_before(jiffies, 263 p_priv->tx_start_time[flip] + 10 * HZ)) 264 break; 265 usb_unlink_urb(this_urb); 266 break; 267 } 268 269 /* First byte in buffer is "last flag" (except for usa19hx) 270 - unused so for now so set to zero */ 271 ((char *)this_urb->transfer_buffer)[0] = 0; 272 273 memcpy(this_urb->transfer_buffer + dataOffset, buf, todo); 274 buf += todo; 275 276 /* send the data out the bulk port */ 277 this_urb->transfer_buffer_length = todo + dataOffset; 278 279 err = usb_submit_urb(this_urb, GFP_ATOMIC); 280 if (err != 0) 281 dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err); 282 p_priv->tx_start_time[flip] = jiffies; 283 284 /* Flip for next time if usa26 or usa28 interface 285 (not used on usa49) */ 286 p_priv->out_flip = (flip + 1) & d_details->outdat_endp_flip; 287 } 288 289 return count - left; 290} 291 292static void usa26_indat_callback(struct urb *urb) 293{ 294 int i, err; 295 int endpoint; 296 struct usb_serial_port *port; 297 unsigned char *data = urb->transfer_buffer; 298 int status = urb->status; 299 300 endpoint = usb_pipeendpoint(urb->pipe); 301 302 if (status) { 303 dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", 304 __func__, status, endpoint); 305 return; 306 } 307 308 port = urb->context; 309 if (urb->actual_length) { 310 /* 0x80 bit is error flag */ 311 if ((data[0] & 0x80) == 0) { 312 /* no errors on individual bytes, only 313 possible overrun err */ 314 if (data[0] & RXERROR_OVERRUN) { 315 tty_insert_flip_char(&port->port, 0, 316 TTY_OVERRUN); 317 } 318 for (i = 1; i < urb->actual_length ; ++i) 319 tty_insert_flip_char(&port->port, data[i], 320 TTY_NORMAL); 321 } else { 322 /* some bytes had errors, every byte has status */ 323 dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); 324 for (i = 0; i + 1 < urb->actual_length; i += 2) { 325 int stat = data[i]; 326 int flag = TTY_NORMAL; 327 328 if (stat & RXERROR_OVERRUN) { 329 tty_insert_flip_char(&port->port, 0, 330 TTY_OVERRUN); 331 } 332 /* XXX should handle break (0x10) */ 333 if (stat & RXERROR_PARITY) 334 flag = TTY_PARITY; 335 else if (stat & RXERROR_FRAMING) 336 flag = TTY_FRAME; 337 338 tty_insert_flip_char(&port->port, data[i+1], 339 flag); 340 } 341 } 342 tty_flip_buffer_push(&port->port); 343 } 344 345 /* Resubmit urb so we continue receiving */ 346 err = usb_submit_urb(urb, GFP_ATOMIC); 347 if (err != 0) 348 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 349} 350 351/* Outdat handling is common for all devices */ 352static void usa2x_outdat_callback(struct urb *urb) 353{ 354 struct usb_serial_port *port; 355 struct keyspan_port_private *p_priv; 356 357 port = urb->context; 358 p_priv = usb_get_serial_port_data(port); 359 dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]); 360 361 usb_serial_port_softint(port); 362} 363 364static void usa26_inack_callback(struct urb *urb) 365{ 366} 367 368static void usa26_outcont_callback(struct urb *urb) 369{ 370 struct usb_serial_port *port; 371 struct keyspan_port_private *p_priv; 372 373 port = urb->context; 374 p_priv = usb_get_serial_port_data(port); 375 376 if (p_priv->resend_cont) { 377 dev_dbg(&port->dev, "%s - sending setup\n", __func__); 378 keyspan_usa26_send_setup(port->serial, port, 379 p_priv->resend_cont - 1); 380 } 381} 382 383static void usa26_instat_callback(struct urb *urb) 384{ 385 unsigned char *data = urb->transfer_buffer; 386 struct keyspan_usa26_portStatusMessage *msg; 387 struct usb_serial *serial; 388 struct usb_serial_port *port; 389 struct keyspan_port_private *p_priv; 390 int old_dcd_state, err; 391 int status = urb->status; 392 393 serial = urb->context; 394 395 if (status) { 396 dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); 397 return; 398 } 399 if (urb->actual_length != 9) { 400 dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); 401 goto exit; 402 } 403 404 msg = (struct keyspan_usa26_portStatusMessage *)data; 405 406 /* Check port number from message and retrieve private data */ 407 if (msg->port >= serial->num_ports) { 408 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); 409 goto exit; 410 } 411 port = serial->port[msg->port]; 412 p_priv = usb_get_serial_port_data(port); 413 if (!p_priv) 414 goto resubmit; 415 416 /* Update handshaking pin state information */ 417 old_dcd_state = p_priv->dcd_state; 418 p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0); 419 p_priv->dsr_state = ((msg->dsr) ? 1 : 0); 420 p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); 421 p_priv->ri_state = ((msg->ri) ? 1 : 0); 422 423 if (old_dcd_state != p_priv->dcd_state) 424 tty_port_tty_hangup(&port->port, true); 425resubmit: 426 /* Resubmit urb so we continue receiving */ 427 err = usb_submit_urb(urb, GFP_ATOMIC); 428 if (err != 0) 429 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 430exit: ; 431} 432 433static void usa26_glocont_callback(struct urb *urb) 434{ 435} 436 437 438static void usa28_indat_callback(struct urb *urb) 439{ 440 int err; 441 struct usb_serial_port *port; 442 unsigned char *data; 443 struct keyspan_port_private *p_priv; 444 int status = urb->status; 445 446 port = urb->context; 447 p_priv = usb_get_serial_port_data(port); 448 data = urb->transfer_buffer; 449 450 if (urb != p_priv->in_urbs[p_priv->in_flip]) 451 return; 452 453 do { 454 if (status) { 455 dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", 456 __func__, status, usb_pipeendpoint(urb->pipe)); 457 return; 458 } 459 460 port = urb->context; 461 p_priv = usb_get_serial_port_data(port); 462 data = urb->transfer_buffer; 463 464 if (urb->actual_length) { 465 tty_insert_flip_string(&port->port, data, 466 urb->actual_length); 467 tty_flip_buffer_push(&port->port); 468 } 469 470 /* Resubmit urb so we continue receiving */ 471 err = usb_submit_urb(urb, GFP_ATOMIC); 472 if (err != 0) 473 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", 474 __func__, err); 475 p_priv->in_flip ^= 1; 476 477 urb = p_priv->in_urbs[p_priv->in_flip]; 478 } while (urb->status != -EINPROGRESS); 479} 480 481static void usa28_inack_callback(struct urb *urb) 482{ 483} 484 485static void usa28_outcont_callback(struct urb *urb) 486{ 487 struct usb_serial_port *port; 488 struct keyspan_port_private *p_priv; 489 490 port = urb->context; 491 p_priv = usb_get_serial_port_data(port); 492 493 if (p_priv->resend_cont) { 494 dev_dbg(&port->dev, "%s - sending setup\n", __func__); 495 keyspan_usa28_send_setup(port->serial, port, 496 p_priv->resend_cont - 1); 497 } 498} 499 500static void usa28_instat_callback(struct urb *urb) 501{ 502 int err; 503 unsigned char *data = urb->transfer_buffer; 504 struct keyspan_usa28_portStatusMessage *msg; 505 struct usb_serial *serial; 506 struct usb_serial_port *port; 507 struct keyspan_port_private *p_priv; 508 int old_dcd_state; 509 int status = urb->status; 510 511 serial = urb->context; 512 513 if (status) { 514 dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); 515 return; 516 } 517 518 if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) { 519 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); 520 goto exit; 521 } 522 523 msg = (struct keyspan_usa28_portStatusMessage *)data; 524 525 /* Check port number from message and retrieve private data */ 526 if (msg->port >= serial->num_ports) { 527 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); 528 goto exit; 529 } 530 port = serial->port[msg->port]; 531 p_priv = usb_get_serial_port_data(port); 532 if (!p_priv) 533 goto resubmit; 534 535 /* Update handshaking pin state information */ 536 old_dcd_state = p_priv->dcd_state; 537 p_priv->cts_state = ((msg->cts) ? 1 : 0); 538 p_priv->dsr_state = ((msg->dsr) ? 1 : 0); 539 p_priv->dcd_state = ((msg->dcd) ? 1 : 0); 540 p_priv->ri_state = ((msg->ri) ? 1 : 0); 541 542 if (old_dcd_state != p_priv->dcd_state && old_dcd_state) 543 tty_port_tty_hangup(&port->port, true); 544resubmit: 545 /* Resubmit urb so we continue receiving */ 546 err = usb_submit_urb(urb, GFP_ATOMIC); 547 if (err != 0) 548 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 549exit: ; 550} 551 552static void usa28_glocont_callback(struct urb *urb) 553{ 554} 555 556 557static void usa49_glocont_callback(struct urb *urb) 558{ 559 struct usb_serial *serial; 560 struct usb_serial_port *port; 561 struct keyspan_port_private *p_priv; 562 int i; 563 564 serial = urb->context; 565 for (i = 0; i < serial->num_ports; ++i) { 566 port = serial->port[i]; 567 p_priv = usb_get_serial_port_data(port); 568 569 if (p_priv->resend_cont) { 570 dev_dbg(&port->dev, "%s - sending setup\n", __func__); 571 keyspan_usa49_send_setup(serial, port, 572 p_priv->resend_cont - 1); 573 break; 574 } 575 } 576} 577 578 /* This is actually called glostat in the Keyspan 579 doco */ 580static void usa49_instat_callback(struct urb *urb) 581{ 582 int err; 583 unsigned char *data = urb->transfer_buffer; 584 struct keyspan_usa49_portStatusMessage *msg; 585 struct usb_serial *serial; 586 struct usb_serial_port *port; 587 struct keyspan_port_private *p_priv; 588 int old_dcd_state; 589 int status = urb->status; 590 591 serial = urb->context; 592 593 if (status) { 594 dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); 595 return; 596 } 597 598 if (urb->actual_length != 599 sizeof(struct keyspan_usa49_portStatusMessage)) { 600 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); 601 goto exit; 602 } 603 604 msg = (struct keyspan_usa49_portStatusMessage *)data; 605 606 /* Check port number from message and retrieve private data */ 607 if (msg->portNumber >= serial->num_ports) { 608 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", 609 __func__, msg->portNumber); 610 goto exit; 611 } 612 port = serial->port[msg->portNumber]; 613 p_priv = usb_get_serial_port_data(port); 614 if (!p_priv) 615 goto resubmit; 616 617 /* Update handshaking pin state information */ 618 old_dcd_state = p_priv->dcd_state; 619 p_priv->cts_state = ((msg->cts) ? 1 : 0); 620 p_priv->dsr_state = ((msg->dsr) ? 1 : 0); 621 p_priv->dcd_state = ((msg->dcd) ? 1 : 0); 622 p_priv->ri_state = ((msg->ri) ? 1 : 0); 623 624 if (old_dcd_state != p_priv->dcd_state && old_dcd_state) 625 tty_port_tty_hangup(&port->port, true); 626resubmit: 627 /* Resubmit urb so we continue receiving */ 628 err = usb_submit_urb(urb, GFP_ATOMIC); 629 if (err != 0) 630 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 631exit: ; 632} 633 634static void usa49_inack_callback(struct urb *urb) 635{ 636} 637 638static void usa49_indat_callback(struct urb *urb) 639{ 640 int i, err; 641 int endpoint; 642 struct usb_serial_port *port; 643 unsigned char *data = urb->transfer_buffer; 644 int status = urb->status; 645 646 endpoint = usb_pipeendpoint(urb->pipe); 647 648 if (status) { 649 dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", 650 __func__, status, endpoint); 651 return; 652 } 653 654 port = urb->context; 655 if (urb->actual_length) { 656 /* 0x80 bit is error flag */ 657 if ((data[0] & 0x80) == 0) { 658 /* no error on any byte */ 659 tty_insert_flip_string(&port->port, data + 1, 660 urb->actual_length - 1); 661 } else { 662 /* some bytes had errors, every byte has status */ 663 for (i = 0; i + 1 < urb->actual_length; i += 2) { 664 int stat = data[i]; 665 int flag = TTY_NORMAL; 666 667 if (stat & RXERROR_OVERRUN) { 668 tty_insert_flip_char(&port->port, 0, 669 TTY_OVERRUN); 670 } 671 /* XXX should handle break (0x10) */ 672 if (stat & RXERROR_PARITY) 673 flag = TTY_PARITY; 674 else if (stat & RXERROR_FRAMING) 675 flag = TTY_FRAME; 676 677 tty_insert_flip_char(&port->port, data[i+1], 678 flag); 679 } 680 } 681 tty_flip_buffer_push(&port->port); 682 } 683 684 /* Resubmit urb so we continue receiving */ 685 err = usb_submit_urb(urb, GFP_ATOMIC); 686 if (err != 0) 687 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 688} 689 690static void usa49wg_indat_callback(struct urb *urb) 691{ 692 int i, len, x, err; 693 struct usb_serial *serial; 694 struct usb_serial_port *port; 695 unsigned char *data = urb->transfer_buffer; 696 int status = urb->status; 697 698 serial = urb->context; 699 700 if (status) { 701 dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); 702 return; 703 } 704 705 /* inbound data is in the form P#, len, status, data */ 706 i = 0; 707 len = 0; 708 709 while (i < urb->actual_length) { 710 711 /* Check port number from message */ 712 if (data[i] >= serial->num_ports) { 713 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", 714 __func__, data[i]); 715 return; 716 } 717 port = serial->port[data[i++]]; 718 len = data[i++]; 719 720 /* 0x80 bit is error flag */ 721 if ((data[i] & 0x80) == 0) { 722 /* no error on any byte */ 723 i++; 724 for (x = 1; x < len && i < urb->actual_length; ++x) 725 tty_insert_flip_char(&port->port, 726 data[i++], 0); 727 } else { 728 /* 729 * some bytes had errors, every byte has status 730 */ 731 for (x = 0; x + 1 < len && 732 i + 1 < urb->actual_length; x += 2) { 733 int stat = data[i]; 734 int flag = TTY_NORMAL; 735 736 if (stat & RXERROR_OVERRUN) { 737 tty_insert_flip_char(&port->port, 0, 738 TTY_OVERRUN); 739 } 740 /* XXX should handle break (0x10) */ 741 if (stat & RXERROR_PARITY) 742 flag = TTY_PARITY; 743 else if (stat & RXERROR_FRAMING) 744 flag = TTY_FRAME; 745 746 tty_insert_flip_char(&port->port, data[i+1], 747 flag); 748 i += 2; 749 } 750 } 751 tty_flip_buffer_push(&port->port); 752 } 753 754 /* Resubmit urb so we continue receiving */ 755 err = usb_submit_urb(urb, GFP_ATOMIC); 756 if (err != 0) 757 dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 758} 759 760/* not used, usa-49 doesn't have per-port control endpoints */ 761static void usa49_outcont_callback(struct urb *urb) 762{ 763} 764 765static void usa90_indat_callback(struct urb *urb) 766{ 767 int i, err; 768 int endpoint; 769 struct usb_serial_port *port; 770 struct keyspan_port_private *p_priv; 771 unsigned char *data = urb->transfer_buffer; 772 int status = urb->status; 773 774 endpoint = usb_pipeendpoint(urb->pipe); 775 776 if (status) { 777 dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", 778 __func__, status, endpoint); 779 return; 780 } 781 782 port = urb->context; 783 p_priv = usb_get_serial_port_data(port); 784 785 if (urb->actual_length) { 786 /* if current mode is DMA, looks like usa28 format 787 otherwise looks like usa26 data format */ 788 789 if (p_priv->baud > 57600) 790 tty_insert_flip_string(&port->port, data, 791 urb->actual_length); 792 else { 793 /* 0x80 bit is error flag */ 794 if ((data[0] & 0x80) == 0) { 795 /* no errors on individual bytes, only 796 possible overrun err*/ 797 if (data[0] & RXERROR_OVERRUN) { 798 tty_insert_flip_char(&port->port, 0, 799 TTY_OVERRUN); 800 } 801 for (i = 1; i < urb->actual_length ; ++i) 802 tty_insert_flip_char(&port->port, 803 data[i], TTY_NORMAL); 804 } else { 805 /* some bytes had errors, every byte has status */ 806 dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); 807 for (i = 0; i + 1 < urb->actual_length; i += 2) { 808 int stat = data[i]; 809 int flag = TTY_NORMAL; 810 811 if (stat & RXERROR_OVERRUN) { 812 tty_insert_flip_char( 813 &port->port, 0, 814 TTY_OVERRUN); 815 } 816 /* XXX should handle break (0x10) */ 817 if (stat & RXERROR_PARITY) 818 flag = TTY_PARITY; 819 else if (stat & RXERROR_FRAMING) 820 flag = TTY_FRAME; 821 822 tty_insert_flip_char(&port->port, 823 data[i+1], flag); 824 } 825 } 826 } 827 tty_flip_buffer_push(&port->port); 828 } 829 830 /* Resubmit urb so we continue receiving */ 831 err = usb_submit_urb(urb, GFP_ATOMIC); 832 if (err != 0) 833 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 834} 835 836 837static void usa90_instat_callback(struct urb *urb) 838{ 839 unsigned char *data = urb->transfer_buffer; 840 struct keyspan_usa90_portStatusMessage *msg; 841 struct usb_serial *serial; 842 struct usb_serial_port *port; 843 struct keyspan_port_private *p_priv; 844 int old_dcd_state, err; 845 int status = urb->status; 846 847 serial = urb->context; 848 849 if (status) { 850 dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); 851 return; 852 } 853 if (urb->actual_length < 14) { 854 dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); 855 goto exit; 856 } 857 858 msg = (struct keyspan_usa90_portStatusMessage *)data; 859 860 /* Now do something useful with the data */ 861 862 port = serial->port[0]; 863 p_priv = usb_get_serial_port_data(port); 864 if (!p_priv) 865 goto resubmit; 866 867 /* Update handshaking pin state information */ 868 old_dcd_state = p_priv->dcd_state; 869 p_priv->cts_state = ((msg->cts) ? 1 : 0); 870 p_priv->dsr_state = ((msg->dsr) ? 1 : 0); 871 p_priv->dcd_state = ((msg->dcd) ? 1 : 0); 872 p_priv->ri_state = ((msg->ri) ? 1 : 0); 873 874 if (old_dcd_state != p_priv->dcd_state && old_dcd_state) 875 tty_port_tty_hangup(&port->port, true); 876resubmit: 877 /* Resubmit urb so we continue receiving */ 878 err = usb_submit_urb(urb, GFP_ATOMIC); 879 if (err != 0) 880 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 881exit: 882 ; 883} 884 885static void usa90_outcont_callback(struct urb *urb) 886{ 887 struct usb_serial_port *port; 888 struct keyspan_port_private *p_priv; 889 890 port = urb->context; 891 p_priv = usb_get_serial_port_data(port); 892 893 if (p_priv->resend_cont) { 894 dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__); 895 keyspan_usa90_send_setup(port->serial, port, 896 p_priv->resend_cont - 1); 897 } 898} 899 900/* Status messages from the 28xg */ 901static void usa67_instat_callback(struct urb *urb) 902{ 903 int err; 904 unsigned char *data = urb->transfer_buffer; 905 struct keyspan_usa67_portStatusMessage *msg; 906 struct usb_serial *serial; 907 struct usb_serial_port *port; 908 struct keyspan_port_private *p_priv; 909 int old_dcd_state; 910 int status = urb->status; 911 912 serial = urb->context; 913 914 if (status) { 915 dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); 916 return; 917 } 918 919 if (urb->actual_length != 920 sizeof(struct keyspan_usa67_portStatusMessage)) { 921 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); 922 return; 923 } 924 925 926 /* Now do something useful with the data */ 927 msg = (struct keyspan_usa67_portStatusMessage *)data; 928 929 /* Check port number from message and retrieve private data */ 930 if (msg->port >= serial->num_ports) { 931 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); 932 return; 933 } 934 935 port = serial->port[msg->port]; 936 p_priv = usb_get_serial_port_data(port); 937 if (!p_priv) 938 goto resubmit; 939 940 /* Update handshaking pin state information */ 941 old_dcd_state = p_priv->dcd_state; 942 p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0); 943 p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); 944 945 if (old_dcd_state != p_priv->dcd_state && old_dcd_state) 946 tty_port_tty_hangup(&port->port, true); 947resubmit: 948 /* Resubmit urb so we continue receiving */ 949 err = usb_submit_urb(urb, GFP_ATOMIC); 950 if (err != 0) 951 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 952} 953 954static void usa67_glocont_callback(struct urb *urb) 955{ 956 struct usb_serial *serial; 957 struct usb_serial_port *port; 958 struct keyspan_port_private *p_priv; 959 int i; 960 961 serial = urb->context; 962 for (i = 0; i < serial->num_ports; ++i) { 963 port = serial->port[i]; 964 p_priv = usb_get_serial_port_data(port); 965 966 if (p_priv->resend_cont) { 967 dev_dbg(&port->dev, "%s - sending setup\n", __func__); 968 keyspan_usa67_send_setup(serial, port, 969 p_priv->resend_cont - 1); 970 break; 971 } 972 } 973} 974 975static int keyspan_write_room(struct tty_struct *tty) 976{ 977 struct usb_serial_port *port = tty->driver_data; 978 struct keyspan_port_private *p_priv; 979 const struct keyspan_device_details *d_details; 980 int flip; 981 int data_len; 982 struct urb *this_urb; 983 984 p_priv = usb_get_serial_port_data(port); 985 d_details = p_priv->device_details; 986 987 /* FIXME: locking */ 988 if (d_details->msg_format == msg_usa90) 989 data_len = 64; 990 else 991 data_len = 63; 992 993 flip = p_priv->out_flip; 994 995 /* Check both endpoints to see if any are available. */ 996 this_urb = p_priv->out_urbs[flip]; 997 if (this_urb != NULL) { 998 if (this_urb->status != -EINPROGRESS) 999 return data_len; 1000 flip = (flip + 1) & d_details->outdat_endp_flip; 1001 this_urb = p_priv->out_urbs[flip]; 1002 if (this_urb != NULL) { 1003 if (this_urb->status != -EINPROGRESS) 1004 return data_len; 1005 } 1006 } 1007 return 0; 1008} 1009 1010 1011static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) 1012{ 1013 struct keyspan_port_private *p_priv; 1014 const struct keyspan_device_details *d_details; 1015 int i, err; 1016 int baud_rate, device_port; 1017 struct urb *urb; 1018 unsigned int cflag = 0; 1019 1020 p_priv = usb_get_serial_port_data(port); 1021 d_details = p_priv->device_details; 1022 1023 /* Set some sane defaults */ 1024 p_priv->rts_state = 1; 1025 p_priv->dtr_state = 1; 1026 p_priv->baud = 9600; 1027 1028 /* force baud and lcr to be set on open */ 1029 p_priv->old_baud = 0; 1030 p_priv->old_cflag = 0; 1031 1032 p_priv->out_flip = 0; 1033 p_priv->in_flip = 0; 1034 1035 /* Reset low level data toggle and start reading from endpoints */ 1036 for (i = 0; i < 2; i++) { 1037 urb = p_priv->in_urbs[i]; 1038 if (urb == NULL) 1039 continue; 1040 1041 /* make sure endpoint data toggle is synchronized 1042 with the device */ 1043 usb_clear_halt(urb->dev, urb->pipe); 1044 err = usb_submit_urb(urb, GFP_KERNEL); 1045 if (err != 0) 1046 dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err); 1047 } 1048 1049 /* Reset low level data toggle on out endpoints */ 1050 for (i = 0; i < 2; i++) { 1051 urb = p_priv->out_urbs[i]; 1052 if (urb == NULL) 1053 continue; 1054 /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), 1055 usb_pipeout(urb->pipe), 0); */ 1056 } 1057 1058 /* get the terminal config for the setup message now so we don't 1059 * need to send 2 of them */ 1060 1061 device_port = port->port_number; 1062 if (tty) { 1063 cflag = tty->termios.c_cflag; 1064 /* Baud rate calculation takes baud rate as an integer 1065 so other rates can be generated if desired. */ 1066 baud_rate = tty_get_baud_rate(tty); 1067 /* If no match or invalid, leave as default */ 1068 if (baud_rate >= 0 1069 && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, 1070 NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { 1071 p_priv->baud = baud_rate; 1072 } 1073 } 1074 /* set CTS/RTS handshake etc. */ 1075 p_priv->cflag = cflag; 1076 p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none; 1077 1078 keyspan_send_setup(port, 1); 1079 /* mdelay(100); */ 1080 /* keyspan_set_termios(port, NULL); */ 1081 1082 return 0; 1083} 1084 1085static inline void stop_urb(struct urb *urb) 1086{ 1087 if (urb && urb->status == -EINPROGRESS) 1088 usb_kill_urb(urb); 1089} 1090 1091static void keyspan_dtr_rts(struct usb_serial_port *port, int on) 1092{ 1093 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); 1094 1095 p_priv->rts_state = on; 1096 p_priv->dtr_state = on; 1097 keyspan_send_setup(port, 0); 1098} 1099 1100static void keyspan_close(struct usb_serial_port *port) 1101{ 1102 int i; 1103 struct keyspan_port_private *p_priv; 1104 1105 p_priv = usb_get_serial_port_data(port); 1106 1107 p_priv->rts_state = 0; 1108 p_priv->dtr_state = 0; 1109 1110 keyspan_send_setup(port, 2); 1111 /* pilot-xfer seems to work best with this delay */ 1112 mdelay(100); 1113 1114 p_priv->out_flip = 0; 1115 p_priv->in_flip = 0; 1116 1117 stop_urb(p_priv->inack_urb); 1118 for (i = 0; i < 2; i++) { 1119 stop_urb(p_priv->in_urbs[i]); 1120 stop_urb(p_priv->out_urbs[i]); 1121 } 1122} 1123 1124/* download the firmware to a pre-renumeration device */ 1125static int keyspan_fake_startup(struct usb_serial *serial) 1126{ 1127 char *fw_name; 1128 1129 dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n", 1130 le16_to_cpu(serial->dev->descriptor.bcdDevice), 1131 le16_to_cpu(serial->dev->descriptor.idProduct)); 1132 1133 if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000) 1134 != 0x8000) { 1135 dev_dbg(&serial->dev->dev, "Firmware already loaded. Quitting.\n"); 1136 return 1; 1137 } 1138 1139 /* Select firmware image on the basis of idProduct */ 1140 switch (le16_to_cpu(serial->dev->descriptor.idProduct)) { 1141 case keyspan_usa28_pre_product_id: 1142 fw_name = "keyspan/usa28.fw"; 1143 break; 1144 1145 case keyspan_usa28x_pre_product_id: 1146 fw_name = "keyspan/usa28x.fw"; 1147 break; 1148 1149 case keyspan_usa28xa_pre_product_id: 1150 fw_name = "keyspan/usa28xa.fw"; 1151 break; 1152 1153 case keyspan_usa28xb_pre_product_id: 1154 fw_name = "keyspan/usa28xb.fw"; 1155 break; 1156 1157 case keyspan_usa19_pre_product_id: 1158 fw_name = "keyspan/usa19.fw"; 1159 break; 1160 1161 case keyspan_usa19qi_pre_product_id: 1162 fw_name = "keyspan/usa19qi.fw"; 1163 break; 1164 1165 case keyspan_mpr_pre_product_id: 1166 fw_name = "keyspan/mpr.fw"; 1167 break; 1168 1169 case keyspan_usa19qw_pre_product_id: 1170 fw_name = "keyspan/usa19qw.fw"; 1171 break; 1172 1173 case keyspan_usa18x_pre_product_id: 1174 fw_name = "keyspan/usa18x.fw"; 1175 break; 1176 1177 case keyspan_usa19w_pre_product_id: 1178 fw_name = "keyspan/usa19w.fw"; 1179 break; 1180 1181 case keyspan_usa49w_pre_product_id: 1182 fw_name = "keyspan/usa49w.fw"; 1183 break; 1184 1185 case keyspan_usa49wlc_pre_product_id: 1186 fw_name = "keyspan/usa49wlc.fw"; 1187 break; 1188 1189 default: 1190 dev_err(&serial->dev->dev, "Unknown product ID (%04x)\n", 1191 le16_to_cpu(serial->dev->descriptor.idProduct)); 1192 return 1; 1193 } 1194 1195 dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name); 1196 1197 if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) { 1198 dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n", 1199 fw_name); 1200 return -ENOENT; 1201 } 1202 1203 /* after downloading firmware Renumeration will occur in a 1204 moment and the new device will bind to the real driver */ 1205 1206 /* we don't want this device to have a driver assigned to it. */ 1207 return 1; 1208} 1209 1210/* Helper functions used by keyspan_setup_urbs */ 1211static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial, 1212 int endpoint) 1213{ 1214 struct usb_host_interface *iface_desc; 1215 struct usb_endpoint_descriptor *ep; 1216 int i; 1217 1218 iface_desc = serial->interface->cur_altsetting; 1219 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { 1220 ep = &iface_desc->endpoint[i].desc; 1221 if (ep->bEndpointAddress == endpoint) 1222 return ep; 1223 } 1224 dev_warn(&serial->interface->dev, "found no endpoint descriptor for " 1225 "endpoint %x\n", endpoint); 1226 return NULL; 1227} 1228 1229static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, 1230 int dir, void *ctx, char *buf, int len, 1231 void (*callback)(struct urb *)) 1232{ 1233 struct urb *urb; 1234 struct usb_endpoint_descriptor const *ep_desc; 1235 char const *ep_type_name; 1236 1237 if (endpoint == -1) 1238 return NULL; /* endpoint not needed */ 1239 1240 dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d.\n", __func__, endpoint); 1241 urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ 1242 if (!urb) 1243 return NULL; 1244 1245 if (endpoint == 0) { 1246 /* control EP filled in when used */ 1247 return urb; 1248 } 1249 1250 ep_desc = find_ep(serial, endpoint); 1251 if (!ep_desc) { 1252 /* leak the urb, something's wrong and the callers don't care */ 1253 return urb; 1254 } 1255 if (usb_endpoint_xfer_int(ep_desc)) { 1256 ep_type_name = "INT"; 1257 usb_fill_int_urb(urb, serial->dev, 1258 usb_sndintpipe(serial->dev, endpoint) | dir, 1259 buf, len, callback, ctx, 1260 ep_desc->bInterval); 1261 } else if (usb_endpoint_xfer_bulk(ep_desc)) { 1262 ep_type_name = "BULK"; 1263 usb_fill_bulk_urb(urb, serial->dev, 1264 usb_sndbulkpipe(serial->dev, endpoint) | dir, 1265 buf, len, callback, ctx); 1266 } else { 1267 dev_warn(&serial->interface->dev, 1268 "unsupported endpoint type %x\n", 1269 usb_endpoint_type(ep_desc)); 1270 usb_free_urb(urb); 1271 return NULL; 1272 } 1273 1274 dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n", 1275 __func__, urb, ep_type_name, endpoint); 1276 return urb; 1277} 1278 1279static struct callbacks { 1280 void (*instat_callback)(struct urb *); 1281 void (*glocont_callback)(struct urb *); 1282 void (*indat_callback)(struct urb *); 1283 void (*outdat_callback)(struct urb *); 1284 void (*inack_callback)(struct urb *); 1285 void (*outcont_callback)(struct urb *); 1286} keyspan_callbacks[] = { 1287 { 1288 /* msg_usa26 callbacks */ 1289 .instat_callback = usa26_instat_callback, 1290 .glocont_callback = usa26_glocont_callback, 1291 .indat_callback = usa26_indat_callback, 1292 .outdat_callback = usa2x_outdat_callback, 1293 .inack_callback = usa26_inack_callback, 1294 .outcont_callback = usa26_outcont_callback, 1295 }, { 1296 /* msg_usa28 callbacks */ 1297 .instat_callback = usa28_instat_callback, 1298 .glocont_callback = usa28_glocont_callback, 1299 .indat_callback = usa28_indat_callback, 1300 .outdat_callback = usa2x_outdat_callback, 1301 .inack_callback = usa28_inack_callback, 1302 .outcont_callback = usa28_outcont_callback, 1303 }, { 1304 /* msg_usa49 callbacks */ 1305 .instat_callback = usa49_instat_callback, 1306 .glocont_callback = usa49_glocont_callback, 1307 .indat_callback = usa49_indat_callback, 1308 .outdat_callback = usa2x_outdat_callback, 1309 .inack_callback = usa49_inack_callback, 1310 .outcont_callback = usa49_outcont_callback, 1311 }, { 1312 /* msg_usa90 callbacks */ 1313 .instat_callback = usa90_instat_callback, 1314 .glocont_callback = usa28_glocont_callback, 1315 .indat_callback = usa90_indat_callback, 1316 .outdat_callback = usa2x_outdat_callback, 1317 .inack_callback = usa28_inack_callback, 1318 .outcont_callback = usa90_outcont_callback, 1319 }, { 1320 /* msg_usa67 callbacks */ 1321 .instat_callback = usa67_instat_callback, 1322 .glocont_callback = usa67_glocont_callback, 1323 .indat_callback = usa26_indat_callback, 1324 .outdat_callback = usa2x_outdat_callback, 1325 .inack_callback = usa26_inack_callback, 1326 .outcont_callback = usa26_outcont_callback, 1327 } 1328}; 1329 1330 /* Generic setup urbs function that uses 1331 data in device_details */ 1332static void keyspan_setup_urbs(struct usb_serial *serial) 1333{ 1334 struct keyspan_serial_private *s_priv; 1335 const struct keyspan_device_details *d_details; 1336 struct callbacks *cback; 1337 1338 s_priv = usb_get_serial_data(serial); 1339 d_details = s_priv->device_details; 1340 1341 /* Setup values for the various callback routines */ 1342 cback = &keyspan_callbacks[d_details->msg_format]; 1343 1344 /* Allocate and set up urbs for each one that is in use, 1345 starting with instat endpoints */ 1346 s_priv->instat_urb = keyspan_setup_urb 1347 (serial, d_details->instat_endpoint, USB_DIR_IN, 1348 serial, s_priv->instat_buf, INSTAT_BUFLEN, 1349 cback->instat_callback); 1350 1351 s_priv->indat_urb = keyspan_setup_urb 1352 (serial, d_details->indat_endpoint, USB_DIR_IN, 1353 serial, s_priv->indat_buf, INDAT49W_BUFLEN, 1354 usa49wg_indat_callback); 1355 1356 s_priv->glocont_urb = keyspan_setup_urb 1357 (serial, d_details->glocont_endpoint, USB_DIR_OUT, 1358 serial, s_priv->glocont_buf, GLOCONT_BUFLEN, 1359 cback->glocont_callback); 1360} 1361 1362/* usa19 function doesn't require prescaler */ 1363static int keyspan_usa19_calc_baud(struct usb_serial_port *port, 1364 u32 baud_rate, u32 baudclk, u8 *rate_hi, 1365 u8 *rate_low, u8 *prescaler, int portnum) 1366{ 1367 u32 b16, /* baud rate times 16 (actual rate used internally) */ 1368 div, /* divisor */ 1369 cnt; /* inverse of divisor (programmed into 8051) */ 1370 1371 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); 1372 1373 /* prevent divide by zero... */ 1374 b16 = baud_rate * 16L; 1375 if (b16 == 0) 1376 return KEYSPAN_INVALID_BAUD_RATE; 1377 /* Any "standard" rate over 57k6 is marginal on the USA-19 1378 as we run out of divisor resolution. */ 1379 if (baud_rate > 57600) 1380 return KEYSPAN_INVALID_BAUD_RATE; 1381 1382 /* calculate the divisor and the counter (its inverse) */ 1383 div = baudclk / b16; 1384 if (div == 0) 1385 return KEYSPAN_INVALID_BAUD_RATE; 1386 else 1387 cnt = 0 - div; 1388 1389 if (div > 0xffff) 1390 return KEYSPAN_INVALID_BAUD_RATE; 1391 1392 /* return the counter values if non-null */ 1393 if (rate_low) 1394 *rate_low = (u8) (cnt & 0xff); 1395 if (rate_hi) 1396 *rate_hi = (u8) ((cnt >> 8) & 0xff); 1397 if (rate_low && rate_hi) 1398 dev_dbg(&port->dev, "%s - %d %02x %02x.\n", 1399 __func__, baud_rate, *rate_hi, *rate_low); 1400 return KEYSPAN_BAUD_RATE_OK; 1401} 1402 1403/* usa19hs function doesn't require prescaler */ 1404static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port, 1405 u32 baud_rate, u32 baudclk, u8 *rate_hi, 1406 u8 *rate_low, u8 *prescaler, int portnum) 1407{ 1408 u32 b16, /* baud rate times 16 (actual rate used internally) */ 1409 div; /* divisor */ 1410 1411 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); 1412 1413 /* prevent divide by zero... */ 1414 b16 = baud_rate * 16L; 1415 if (b16 == 0) 1416 return KEYSPAN_INVALID_BAUD_RATE; 1417 1418 /* calculate the divisor */ 1419 div = baudclk / b16; 1420 if (div == 0) 1421 return KEYSPAN_INVALID_BAUD_RATE; 1422 1423 if (div > 0xffff) 1424 return KEYSPAN_INVALID_BAUD_RATE; 1425 1426 /* return the counter values if non-null */ 1427 if (rate_low) 1428 *rate_low = (u8) (div & 0xff); 1429 1430 if (rate_hi) 1431 *rate_hi = (u8) ((div >> 8) & 0xff); 1432 1433 if (rate_low && rate_hi) 1434 dev_dbg(&port->dev, "%s - %d %02x %02x.\n", 1435 __func__, baud_rate, *rate_hi, *rate_low); 1436 1437 return KEYSPAN_BAUD_RATE_OK; 1438} 1439 1440static int keyspan_usa19w_calc_baud(struct usb_serial_port *port, 1441 u32 baud_rate, u32 baudclk, u8 *rate_hi, 1442 u8 *rate_low, u8 *prescaler, int portnum) 1443{ 1444 u32 b16, /* baud rate times 16 (actual rate used internally) */ 1445 clk, /* clock with 13/8 prescaler */ 1446 div, /* divisor using 13/8 prescaler */ 1447 res, /* resulting baud rate using 13/8 prescaler */ 1448 diff, /* error using 13/8 prescaler */ 1449 smallest_diff; 1450 u8 best_prescaler; 1451 int i; 1452 1453 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); 1454 1455 /* prevent divide by zero */ 1456 b16 = baud_rate * 16L; 1457 if (b16 == 0) 1458 return KEYSPAN_INVALID_BAUD_RATE; 1459 1460 /* Calculate prescaler by trying them all and looking 1461 for best fit */ 1462 1463 /* start with largest possible difference */ 1464 smallest_diff = 0xffffffff; 1465 1466 /* 0 is an invalid prescaler, used as a flag */ 1467 best_prescaler = 0; 1468 1469 for (i = 8; i <= 0xff; ++i) { 1470 clk = (baudclk * 8) / (u32) i; 1471 1472 div = clk / b16; 1473 if (div == 0) 1474 continue; 1475 1476 res = clk / div; 1477 diff = (res > b16) ? (res-b16) : (b16-res); 1478 1479 if (diff < smallest_diff) { 1480 best_prescaler = i; 1481 smallest_diff = diff; 1482 } 1483 } 1484 1485 if (best_prescaler == 0) 1486 return KEYSPAN_INVALID_BAUD_RATE; 1487 1488 clk = (baudclk * 8) / (u32) best_prescaler; 1489 div = clk / b16; 1490 1491 /* return the divisor and prescaler if non-null */ 1492 if (rate_low) 1493 *rate_low = (u8) (div & 0xff); 1494 if (rate_hi) 1495 *rate_hi = (u8) ((div >> 8) & 0xff); 1496 if (prescaler) { 1497 *prescaler = best_prescaler; 1498 /* dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */ 1499 } 1500 return KEYSPAN_BAUD_RATE_OK; 1501} 1502 1503 /* USA-28 supports different maximum baud rates on each port */ 1504static int keyspan_usa28_calc_baud(struct usb_serial_port *port, 1505 u32 baud_rate, u32 baudclk, u8 *rate_hi, 1506 u8 *rate_low, u8 *prescaler, int portnum) 1507{ 1508 u32 b16, /* baud rate times 16 (actual rate used internally) */ 1509 div, /* divisor */ 1510 cnt; /* inverse of divisor (programmed into 8051) */ 1511 1512 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); 1513 1514 /* prevent divide by zero */ 1515 b16 = baud_rate * 16L; 1516 if (b16 == 0) 1517 return KEYSPAN_INVALID_BAUD_RATE; 1518 1519 /* calculate the divisor and the counter (its inverse) */ 1520 div = KEYSPAN_USA28_BAUDCLK / b16; 1521 if (div == 0) 1522 return KEYSPAN_INVALID_BAUD_RATE; 1523 else 1524 cnt = 0 - div; 1525 1526 /* check for out of range, based on portnum, 1527 and return result */ 1528 if (portnum == 0) { 1529 if (div > 0xffff) 1530 return KEYSPAN_INVALID_BAUD_RATE; 1531 } else { 1532 if (portnum == 1) { 1533 if (div > 0xff) 1534 return KEYSPAN_INVALID_BAUD_RATE; 1535 } else 1536 return KEYSPAN_INVALID_BAUD_RATE; 1537 } 1538 1539 /* return the counter values if not NULL 1540 (port 1 will ignore retHi) */ 1541 if (rate_low) 1542 *rate_low = (u8) (cnt & 0xff); 1543 if (rate_hi) 1544 *rate_hi = (u8) ((cnt >> 8) & 0xff); 1545 dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate); 1546 return KEYSPAN_BAUD_RATE_OK; 1547} 1548 1549static int keyspan_usa26_send_setup(struct usb_serial *serial, 1550 struct usb_serial_port *port, 1551 int reset_port) 1552{ 1553 struct keyspan_usa26_portControlMessage msg; 1554 struct keyspan_serial_private *s_priv; 1555 struct keyspan_port_private *p_priv; 1556 const struct keyspan_device_details *d_details; 1557 struct urb *this_urb; 1558 int device_port, err; 1559 1560 dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port); 1561 1562 s_priv = usb_get_serial_data(serial); 1563 p_priv = usb_get_serial_port_data(port); 1564 d_details = s_priv->device_details; 1565 device_port = port->port_number; 1566 1567 this_urb = p_priv->outcont_urb; 1568 1569 /* Make sure we have an urb then send the message */ 1570 if (this_urb == NULL) { 1571 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); 1572 return -1; 1573 } 1574 1575 dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); 1576 1577 /* Save reset port val for resend. 1578 Don't overwrite resend for open/close condition. */ 1579 if ((reset_port + 1) > p_priv->resend_cont) 1580 p_priv->resend_cont = reset_port + 1; 1581 if (this_urb->status == -EINPROGRESS) { 1582 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ 1583 mdelay(5); 1584 return -1; 1585 } 1586 1587 memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage)); 1588 1589 /* Only set baud rate if it's changed */ 1590 if (p_priv->old_baud != p_priv->baud) { 1591 p_priv->old_baud = p_priv->baud; 1592 msg.setClocking = 0xff; 1593 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 1594 &msg.baudHi, &msg.baudLo, &msg.prescaler, 1595 device_port) == KEYSPAN_INVALID_BAUD_RATE) { 1596 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", 1597 __func__, p_priv->baud); 1598 msg.baudLo = 0; 1599 msg.baudHi = 125; /* Values for 9600 baud */ 1600 msg.prescaler = 10; 1601 } 1602 msg.setPrescaler = 0xff; 1603 } 1604 1605 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; 1606 switch (p_priv->cflag & CSIZE) { 1607 case CS5: 1608 msg.lcr |= USA_DATABITS_5; 1609 break; 1610 case CS6: 1611 msg.lcr |= USA_DATABITS_6; 1612 break; 1613 case CS7: 1614 msg.lcr |= USA_DATABITS_7; 1615 break; 1616 case CS8: 1617 msg.lcr |= USA_DATABITS_8; 1618 break; 1619 } 1620 if (p_priv->cflag & PARENB) { 1621 /* note USA_PARITY_NONE == 0 */ 1622 msg.lcr |= (p_priv->cflag & PARODD) ? 1623 USA_PARITY_ODD : USA_PARITY_EVEN; 1624 } 1625 msg.setLcr = 0xff; 1626 1627 msg.ctsFlowControl = (p_priv->flow_control == flow_cts); 1628 msg.xonFlowControl = 0; 1629 msg.setFlowControl = 0xff; 1630 msg.forwardingLength = 16; 1631 msg.xonChar = 17; 1632 msg.xoffChar = 19; 1633 1634 /* Opening port */ 1635 if (reset_port == 1) { 1636 msg._txOn = 1; 1637 msg._txOff = 0; 1638 msg.txFlush = 0; 1639 msg.txBreak = 0; 1640 msg.rxOn = 1; 1641 msg.rxOff = 0; 1642 msg.rxFlush = 1; 1643 msg.rxForward = 0; 1644 msg.returnStatus = 0; 1645 msg.resetDataToggle = 0xff; 1646 } 1647 1648 /* Closing port */ 1649 else if (reset_port == 2) { 1650 msg._txOn = 0; 1651 msg._txOff = 1; 1652 msg.txFlush = 0; 1653 msg.txBreak = 0; 1654 msg.rxOn = 0; 1655 msg.rxOff = 1; 1656 msg.rxFlush = 1; 1657 msg.rxForward = 0; 1658 msg.returnStatus = 0; 1659 msg.resetDataToggle = 0; 1660 } 1661 1662 /* Sending intermediate configs */ 1663 else { 1664 msg._txOn = (!p_priv->break_on); 1665 msg._txOff = 0; 1666 msg.txFlush = 0; 1667 msg.txBreak = (p_priv->break_on); 1668 msg.rxOn = 0; 1669 msg.rxOff = 0; 1670 msg.rxFlush = 0; 1671 msg.rxForward = 0; 1672 msg.returnStatus = 0; 1673 msg.resetDataToggle = 0x0; 1674 } 1675 1676 /* Do handshaking outputs */ 1677 msg.setTxTriState_setRts = 0xff; 1678 msg.txTriState_rts = p_priv->rts_state; 1679 1680 msg.setHskoa_setDtr = 0xff; 1681 msg.hskoa_dtr = p_priv->dtr_state; 1682 1683 p_priv->resend_cont = 0; 1684 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); 1685 1686 /* send the data out the device on control endpoint */ 1687 this_urb->transfer_buffer_length = sizeof(msg); 1688 1689 err = usb_submit_urb(this_urb, GFP_ATOMIC); 1690 if (err != 0) 1691 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); 1692 return 0; 1693} 1694 1695static int keyspan_usa28_send_setup(struct usb_serial *serial, 1696 struct usb_serial_port *port, 1697 int reset_port) 1698{ 1699 struct keyspan_usa28_portControlMessage msg; 1700 struct keyspan_serial_private *s_priv; 1701 struct keyspan_port_private *p_priv; 1702 const struct keyspan_device_details *d_details; 1703 struct urb *this_urb; 1704 int device_port, err; 1705 1706 s_priv = usb_get_serial_data(serial); 1707 p_priv = usb_get_serial_port_data(port); 1708 d_details = s_priv->device_details; 1709 device_port = port->port_number; 1710 1711 /* only do something if we have a bulk out endpoint */ 1712 this_urb = p_priv->outcont_urb; 1713 if (this_urb == NULL) { 1714 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); 1715 return -1; 1716 } 1717 1718 /* Save reset port val for resend. 1719 Don't overwrite resend for open/close condition. */ 1720 if ((reset_port + 1) > p_priv->resend_cont) 1721 p_priv->resend_cont = reset_port + 1; 1722 if (this_urb->status == -EINPROGRESS) { 1723 dev_dbg(&port->dev, "%s already writing\n", __func__); 1724 mdelay(5); 1725 return -1; 1726 } 1727 1728 memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage)); 1729 1730 msg.setBaudRate = 1; 1731 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 1732 &msg.baudHi, &msg.baudLo, NULL, 1733 device_port) == KEYSPAN_INVALID_BAUD_RATE) { 1734 dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n", 1735 __func__, p_priv->baud); 1736 msg.baudLo = 0xff; 1737 msg.baudHi = 0xb2; /* Values for 9600 baud */ 1738 } 1739 1740 /* If parity is enabled, we must calculate it ourselves. */ 1741 msg.parity = 0; /* XXX for now */ 1742 1743 msg.ctsFlowControl = (p_priv->flow_control == flow_cts); 1744 msg.xonFlowControl = 0; 1745 1746 /* Do handshaking outputs, DTR is inverted relative to RTS */ 1747 msg.rts = p_priv->rts_state; 1748 msg.dtr = p_priv->dtr_state; 1749 1750 msg.forwardingLength = 16; 1751 msg.forwardMs = 10; 1752 msg.breakThreshold = 45; 1753 msg.xonChar = 17; 1754 msg.xoffChar = 19; 1755 1756 /*msg.returnStatus = 1; 1757 msg.resetDataToggle = 0xff;*/ 1758 /* Opening port */ 1759 if (reset_port == 1) { 1760 msg._txOn = 1; 1761 msg._txOff = 0; 1762 msg.txFlush = 0; 1763 msg.txForceXoff = 0; 1764 msg.txBreak = 0; 1765 msg.rxOn = 1; 1766 msg.rxOff = 0; 1767 msg.rxFlush = 1; 1768 msg.rxForward = 0; 1769 msg.returnStatus = 0; 1770 msg.resetDataToggle = 0xff; 1771 } 1772 /* Closing port */ 1773 else if (reset_port == 2) { 1774 msg._txOn = 0; 1775 msg._txOff = 1; 1776 msg.txFlush = 0; 1777 msg.txForceXoff = 0; 1778 msg.txBreak = 0; 1779 msg.rxOn = 0; 1780 msg.rxOff = 1; 1781 msg.rxFlush = 1; 1782 msg.rxForward = 0; 1783 msg.returnStatus = 0; 1784 msg.resetDataToggle = 0; 1785 } 1786 /* Sending intermediate configs */ 1787 else { 1788 msg._txOn = (!p_priv->break_on); 1789 msg._txOff = 0; 1790 msg.txFlush = 0; 1791 msg.txForceXoff = 0; 1792 msg.txBreak = (p_priv->break_on); 1793 msg.rxOn = 0; 1794 msg.rxOff = 0; 1795 msg.rxFlush = 0; 1796 msg.rxForward = 0; 1797 msg.returnStatus = 0; 1798 msg.resetDataToggle = 0x0; 1799 } 1800 1801 p_priv->resend_cont = 0; 1802 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); 1803 1804 /* send the data out the device on control endpoint */ 1805 this_urb->transfer_buffer_length = sizeof(msg); 1806 1807 err = usb_submit_urb(this_urb, GFP_ATOMIC); 1808 if (err != 0) 1809 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__); 1810 1811 return 0; 1812} 1813 1814static int keyspan_usa49_send_setup(struct usb_serial *serial, 1815 struct usb_serial_port *port, 1816 int reset_port) 1817{ 1818 struct keyspan_usa49_portControlMessage msg; 1819 struct usb_ctrlrequest *dr = NULL; 1820 struct keyspan_serial_private *s_priv; 1821 struct keyspan_port_private *p_priv; 1822 const struct keyspan_device_details *d_details; 1823 struct urb *this_urb; 1824 int err, device_port; 1825 1826 s_priv = usb_get_serial_data(serial); 1827 p_priv = usb_get_serial_port_data(port); 1828 d_details = s_priv->device_details; 1829 1830 this_urb = s_priv->glocont_urb; 1831 1832 /* Work out which port within the device is being setup */ 1833 device_port = port->port_number; 1834 1835 /* Make sure we have an urb then send the message */ 1836 if (this_urb == NULL) { 1837 dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); 1838 return -1; 1839 } 1840 1841 dev_dbg(&port->dev, "%s - endpoint %d (%d)\n", 1842 __func__, usb_pipeendpoint(this_urb->pipe), device_port); 1843 1844 /* Save reset port val for resend. 1845 Don't overwrite resend for open/close condition. */ 1846 if ((reset_port + 1) > p_priv->resend_cont) 1847 p_priv->resend_cont = reset_port + 1; 1848 1849 if (this_urb->status == -EINPROGRESS) { 1850 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ 1851 mdelay(5); 1852 return -1; 1853 } 1854 1855 memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage)); 1856 1857 msg.portNumber = device_port; 1858 1859 /* Only set baud rate if it's changed */ 1860 if (p_priv->old_baud != p_priv->baud) { 1861 p_priv->old_baud = p_priv->baud; 1862 msg.setClocking = 0xff; 1863 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 1864 &msg.baudHi, &msg.baudLo, &msg.prescaler, 1865 device_port) == KEYSPAN_INVALID_BAUD_RATE) { 1866 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", 1867 __func__, p_priv->baud); 1868 msg.baudLo = 0; 1869 msg.baudHi = 125; /* Values for 9600 baud */ 1870 msg.prescaler = 10; 1871 } 1872 /* msg.setPrescaler = 0xff; */ 1873 } 1874 1875 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; 1876 switch (p_priv->cflag & CSIZE) { 1877 case CS5: 1878 msg.lcr |= USA_DATABITS_5; 1879 break; 1880 case CS6: 1881 msg.lcr |= USA_DATABITS_6; 1882 break; 1883 case CS7: 1884 msg.lcr |= USA_DATABITS_7; 1885 break; 1886 case CS8: 1887 msg.lcr |= USA_DATABITS_8; 1888 break; 1889 } 1890 if (p_priv->cflag & PARENB) { 1891 /* note USA_PARITY_NONE == 0 */ 1892 msg.lcr |= (p_priv->cflag & PARODD) ? 1893 USA_PARITY_ODD : USA_PARITY_EVEN; 1894 } 1895 msg.setLcr = 0xff; 1896 1897 msg.ctsFlowControl = (p_priv->flow_control == flow_cts); 1898 msg.xonFlowControl = 0; 1899 msg.setFlowControl = 0xff; 1900 1901 msg.forwardingLength = 16; 1902 msg.xonChar = 17; 1903 msg.xoffChar = 19; 1904 1905 /* Opening port */ 1906 if (reset_port == 1) { 1907 msg._txOn = 1; 1908 msg._txOff = 0; 1909 msg.txFlush = 0; 1910 msg.txBreak = 0; 1911 msg.rxOn = 1; 1912 msg.rxOff = 0; 1913 msg.rxFlush = 1; 1914 msg.rxForward = 0; 1915 msg.returnStatus = 0; 1916 msg.resetDataToggle = 0xff; 1917 msg.enablePort = 1; 1918 msg.disablePort = 0; 1919 } 1920 /* Closing port */ 1921 else if (reset_port == 2) { 1922 msg._txOn = 0; 1923 msg._txOff = 1; 1924 msg.txFlush = 0; 1925 msg.txBreak = 0; 1926 msg.rxOn = 0; 1927 msg.rxOff = 1; 1928 msg.rxFlush = 1; 1929 msg.rxForward = 0; 1930 msg.returnStatus = 0; 1931 msg.resetDataToggle = 0; 1932 msg.enablePort = 0; 1933 msg.disablePort = 1; 1934 } 1935 /* Sending intermediate configs */ 1936 else { 1937 msg._txOn = (!p_priv->break_on); 1938 msg._txOff = 0; 1939 msg.txFlush = 0; 1940 msg.txBreak = (p_priv->break_on); 1941 msg.rxOn = 0; 1942 msg.rxOff = 0; 1943 msg.rxFlush = 0; 1944 msg.rxForward = 0; 1945 msg.returnStatus = 0; 1946 msg.resetDataToggle = 0x0; 1947 msg.enablePort = 0; 1948 msg.disablePort = 0; 1949 } 1950 1951 /* Do handshaking outputs */ 1952 msg.setRts = 0xff; 1953 msg.rts = p_priv->rts_state; 1954 1955 msg.setDtr = 0xff; 1956 msg.dtr = p_priv->dtr_state; 1957 1958 p_priv->resend_cont = 0; 1959 1960 /* if the device is a 49wg, we send control message on usb 1961 control EP 0 */ 1962 1963 if (d_details->product_id == keyspan_usa49wg_product_id) { 1964 dr = (void *)(s_priv->ctrl_buf); 1965 dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT; 1966 dr->bRequest = 0xB0; /* 49wg control message */; 1967 dr->wValue = 0; 1968 dr->wIndex = 0; 1969 dr->wLength = cpu_to_le16(sizeof(msg)); 1970 1971 memcpy(s_priv->glocont_buf, &msg, sizeof(msg)); 1972 1973 usb_fill_control_urb(this_urb, serial->dev, 1974 usb_sndctrlpipe(serial->dev, 0), 1975 (unsigned char *)dr, s_priv->glocont_buf, 1976 sizeof(msg), usa49_glocont_callback, serial); 1977 1978 } else { 1979 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); 1980 1981 /* send the data out the device on control endpoint */ 1982 this_urb->transfer_buffer_length = sizeof(msg); 1983 } 1984 err = usb_submit_urb(this_urb, GFP_ATOMIC); 1985 if (err != 0) 1986 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); 1987 1988 return 0; 1989} 1990 1991static int keyspan_usa90_send_setup(struct usb_serial *serial, 1992 struct usb_serial_port *port, 1993 int reset_port) 1994{ 1995 struct keyspan_usa90_portControlMessage msg; 1996 struct keyspan_serial_private *s_priv; 1997 struct keyspan_port_private *p_priv; 1998 const struct keyspan_device_details *d_details; 1999 struct urb *this_urb; 2000 int err; 2001 u8 prescaler; 2002 2003 s_priv = usb_get_serial_data(serial); 2004 p_priv = usb_get_serial_port_data(port); 2005 d_details = s_priv->device_details; 2006 2007 /* only do something if we have a bulk out endpoint */ 2008 this_urb = p_priv->outcont_urb; 2009 if (this_urb == NULL) { 2010 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); 2011 return -1; 2012 } 2013 2014 /* Save reset port val for resend. 2015 Don't overwrite resend for open/close condition. */ 2016 if ((reset_port + 1) > p_priv->resend_cont) 2017 p_priv->resend_cont = reset_port + 1; 2018 if (this_urb->status == -EINPROGRESS) { 2019 dev_dbg(&port->dev, "%s already writing\n", __func__); 2020 mdelay(5); 2021 return -1; 2022 } 2023 2024 memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage)); 2025 2026 /* Only set baud rate if it's changed */ 2027 if (p_priv->old_baud != p_priv->baud) { 2028 p_priv->old_baud = p_priv->baud; 2029 msg.setClocking = 0x01; 2030 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 2031 &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) { 2032 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", 2033 __func__, p_priv->baud); 2034 p_priv->baud = 9600; 2035 d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 2036 &msg.baudHi, &msg.baudLo, &prescaler, 0); 2037 } 2038 msg.setRxMode = 1; 2039 msg.setTxMode = 1; 2040 } 2041 2042 /* modes must always be correctly specified */ 2043 if (p_priv->baud > 57600) { 2044 msg.rxMode = RXMODE_DMA; 2045 msg.txMode = TXMODE_DMA; 2046 } else { 2047 msg.rxMode = RXMODE_BYHAND; 2048 msg.txMode = TXMODE_BYHAND; 2049 } 2050 2051 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; 2052 switch (p_priv->cflag & CSIZE) { 2053 case CS5: 2054 msg.lcr |= USA_DATABITS_5; 2055 break; 2056 case CS6: 2057 msg.lcr |= USA_DATABITS_6; 2058 break; 2059 case CS7: 2060 msg.lcr |= USA_DATABITS_7; 2061 break; 2062 case CS8: 2063 msg.lcr |= USA_DATABITS_8; 2064 break; 2065 } 2066 if (p_priv->cflag & PARENB) { 2067 /* note USA_PARITY_NONE == 0 */ 2068 msg.lcr |= (p_priv->cflag & PARODD) ? 2069 USA_PARITY_ODD : USA_PARITY_EVEN; 2070 } 2071 if (p_priv->old_cflag != p_priv->cflag) { 2072 p_priv->old_cflag = p_priv->cflag; 2073 msg.setLcr = 0x01; 2074 } 2075 2076 if (p_priv->flow_control == flow_cts) 2077 msg.txFlowControl = TXFLOW_CTS; 2078 msg.setTxFlowControl = 0x01; 2079 msg.setRxFlowControl = 0x01; 2080 2081 msg.rxForwardingLength = 16; 2082 msg.rxForwardingTimeout = 16; 2083 msg.txAckSetting = 0; 2084 msg.xonChar = 17; 2085 msg.xoffChar = 19; 2086 2087 /* Opening port */ 2088 if (reset_port == 1) { 2089 msg.portEnabled = 1; 2090 msg.rxFlush = 1; 2091 msg.txBreak = (p_priv->break_on); 2092 } 2093 /* Closing port */ 2094 else if (reset_port == 2) 2095 msg.portEnabled = 0; 2096 /* Sending intermediate configs */ 2097 else { 2098 msg.portEnabled = 1; 2099 msg.txBreak = (p_priv->break_on); 2100 } 2101 2102 /* Do handshaking outputs */ 2103 msg.setRts = 0x01; 2104 msg.rts = p_priv->rts_state; 2105 2106 msg.setDtr = 0x01; 2107 msg.dtr = p_priv->dtr_state; 2108 2109 p_priv->resend_cont = 0; 2110 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); 2111 2112 /* send the data out the device on control endpoint */ 2113 this_urb->transfer_buffer_length = sizeof(msg); 2114 2115 err = usb_submit_urb(this_urb, GFP_ATOMIC); 2116 if (err != 0) 2117 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); 2118 return 0; 2119} 2120 2121static int keyspan_usa67_send_setup(struct usb_serial *serial, 2122 struct usb_serial_port *port, 2123 int reset_port) 2124{ 2125 struct keyspan_usa67_portControlMessage msg; 2126 struct keyspan_serial_private *s_priv; 2127 struct keyspan_port_private *p_priv; 2128 const struct keyspan_device_details *d_details; 2129 struct urb *this_urb; 2130 int err, device_port; 2131 2132 s_priv = usb_get_serial_data(serial); 2133 p_priv = usb_get_serial_port_data(port); 2134 d_details = s_priv->device_details; 2135 2136 this_urb = s_priv->glocont_urb; 2137 2138 /* Work out which port within the device is being setup */ 2139 device_port = port->port_number; 2140 2141 /* Make sure we have an urb then send the message */ 2142 if (this_urb == NULL) { 2143 dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); 2144 return -1; 2145 } 2146 2147 /* Save reset port val for resend. 2148 Don't overwrite resend for open/close condition. */ 2149 if ((reset_port + 1) > p_priv->resend_cont) 2150 p_priv->resend_cont = reset_port + 1; 2151 if (this_urb->status == -EINPROGRESS) { 2152 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ 2153 mdelay(5); 2154 return -1; 2155 } 2156 2157 memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage)); 2158 2159 msg.port = device_port; 2160 2161 /* Only set baud rate if it's changed */ 2162 if (p_priv->old_baud != p_priv->baud) { 2163 p_priv->old_baud = p_priv->baud; 2164 msg.setClocking = 0xff; 2165 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 2166 &msg.baudHi, &msg.baudLo, &msg.prescaler, 2167 device_port) == KEYSPAN_INVALID_BAUD_RATE) { 2168 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", 2169 __func__, p_priv->baud); 2170 msg.baudLo = 0; 2171 msg.baudHi = 125; /* Values for 9600 baud */ 2172 msg.prescaler = 10; 2173 } 2174 msg.setPrescaler = 0xff; 2175 } 2176 2177 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; 2178 switch (p_priv->cflag & CSIZE) { 2179 case CS5: 2180 msg.lcr |= USA_DATABITS_5; 2181 break; 2182 case CS6: 2183 msg.lcr |= USA_DATABITS_6; 2184 break; 2185 case CS7: 2186 msg.lcr |= USA_DATABITS_7; 2187 break; 2188 case CS8: 2189 msg.lcr |= USA_DATABITS_8; 2190 break; 2191 } 2192 if (p_priv->cflag & PARENB) { 2193 /* note USA_PARITY_NONE == 0 */ 2194 msg.lcr |= (p_priv->cflag & PARODD) ? 2195 USA_PARITY_ODD : USA_PARITY_EVEN; 2196 } 2197 msg.setLcr = 0xff; 2198 2199 msg.ctsFlowControl = (p_priv->flow_control == flow_cts); 2200 msg.xonFlowControl = 0; 2201 msg.setFlowControl = 0xff; 2202 msg.forwardingLength = 16; 2203 msg.xonChar = 17; 2204 msg.xoffChar = 19; 2205 2206 if (reset_port == 1) { 2207 /* Opening port */ 2208 msg._txOn = 1; 2209 msg._txOff = 0; 2210 msg.txFlush = 0; 2211 msg.txBreak = 0; 2212 msg.rxOn = 1; 2213 msg.rxOff = 0; 2214 msg.rxFlush = 1; 2215 msg.rxForward = 0; 2216 msg.returnStatus = 0; 2217 msg.resetDataToggle = 0xff; 2218 } else if (reset_port == 2) { 2219 /* Closing port */ 2220 msg._txOn = 0; 2221 msg._txOff = 1; 2222 msg.txFlush = 0; 2223 msg.txBreak = 0; 2224 msg.rxOn = 0; 2225 msg.rxOff = 1; 2226 msg.rxFlush = 1; 2227 msg.rxForward = 0; 2228 msg.returnStatus = 0; 2229 msg.resetDataToggle = 0; 2230 } else { 2231 /* Sending intermediate configs */ 2232 msg._txOn = (!p_priv->break_on); 2233 msg._txOff = 0; 2234 msg.txFlush = 0; 2235 msg.txBreak = (p_priv->break_on); 2236 msg.rxOn = 0; 2237 msg.rxOff = 0; 2238 msg.rxFlush = 0; 2239 msg.rxForward = 0; 2240 msg.returnStatus = 0; 2241 msg.resetDataToggle = 0x0; 2242 } 2243 2244 /* Do handshaking outputs */ 2245 msg.setTxTriState_setRts = 0xff; 2246 msg.txTriState_rts = p_priv->rts_state; 2247 2248 msg.setHskoa_setDtr = 0xff; 2249 msg.hskoa_dtr = p_priv->dtr_state; 2250 2251 p_priv->resend_cont = 0; 2252 2253 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); 2254 2255 /* send the data out the device on control endpoint */ 2256 this_urb->transfer_buffer_length = sizeof(msg); 2257 2258 err = usb_submit_urb(this_urb, GFP_ATOMIC); 2259 if (err != 0) 2260 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); 2261 return 0; 2262} 2263 2264static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) 2265{ 2266 struct usb_serial *serial = port->serial; 2267 struct keyspan_serial_private *s_priv; 2268 const struct keyspan_device_details *d_details; 2269 2270 s_priv = usb_get_serial_data(serial); 2271 d_details = s_priv->device_details; 2272 2273 switch (d_details->msg_format) { 2274 case msg_usa26: 2275 keyspan_usa26_send_setup(serial, port, reset_port); 2276 break; 2277 case msg_usa28: 2278 keyspan_usa28_send_setup(serial, port, reset_port); 2279 break; 2280 case msg_usa49: 2281 keyspan_usa49_send_setup(serial, port, reset_port); 2282 break; 2283 case msg_usa90: 2284 keyspan_usa90_send_setup(serial, port, reset_port); 2285 break; 2286 case msg_usa67: 2287 keyspan_usa67_send_setup(serial, port, reset_port); 2288 break; 2289 } 2290} 2291 2292 2293/* Gets called by the "real" driver (ie once firmware is loaded 2294 and renumeration has taken place. */ 2295static int keyspan_startup(struct usb_serial *serial) 2296{ 2297 int i, err; 2298 struct keyspan_serial_private *s_priv; 2299 const struct keyspan_device_details *d_details; 2300 2301 for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i) 2302 if (d_details->product_id == 2303 le16_to_cpu(serial->dev->descriptor.idProduct)) 2304 break; 2305 if (d_details == NULL) { 2306 dev_err(&serial->dev->dev, "%s - unknown product id %x\n", 2307 __func__, le16_to_cpu(serial->dev->descriptor.idProduct)); 2308 return -ENODEV; 2309 } 2310 2311 /* Setup private data for serial driver */ 2312 s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL); 2313 if (!s_priv) 2314 return -ENOMEM; 2315 2316 s_priv->instat_buf = kzalloc(INSTAT_BUFLEN, GFP_KERNEL); 2317 if (!s_priv->instat_buf) 2318 goto err_instat_buf; 2319 2320 s_priv->indat_buf = kzalloc(INDAT49W_BUFLEN, GFP_KERNEL); 2321 if (!s_priv->indat_buf) 2322 goto err_indat_buf; 2323 2324 s_priv->glocont_buf = kzalloc(GLOCONT_BUFLEN, GFP_KERNEL); 2325 if (!s_priv->glocont_buf) 2326 goto err_glocont_buf; 2327 2328 s_priv->ctrl_buf = kzalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); 2329 if (!s_priv->ctrl_buf) 2330 goto err_ctrl_buf; 2331 2332 s_priv->device_details = d_details; 2333 usb_set_serial_data(serial, s_priv); 2334 2335 keyspan_setup_urbs(serial); 2336 2337 if (s_priv->instat_urb != NULL) { 2338 err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL); 2339 if (err != 0) 2340 dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err); 2341 } 2342 if (s_priv->indat_urb != NULL) { 2343 err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL); 2344 if (err != 0) 2345 dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err); 2346 } 2347 2348 return 0; 2349 2350err_ctrl_buf: 2351 kfree(s_priv->glocont_buf); 2352err_glocont_buf: 2353 kfree(s_priv->indat_buf); 2354err_indat_buf: 2355 kfree(s_priv->instat_buf); 2356err_instat_buf: 2357 kfree(s_priv); 2358 2359 return -ENOMEM; 2360} 2361 2362static void keyspan_disconnect(struct usb_serial *serial) 2363{ 2364 struct keyspan_serial_private *s_priv; 2365 2366 s_priv = usb_get_serial_data(serial); 2367 2368 stop_urb(s_priv->instat_urb); 2369 stop_urb(s_priv->glocont_urb); 2370 stop_urb(s_priv->indat_urb); 2371} 2372 2373static void keyspan_release(struct usb_serial *serial) 2374{ 2375 struct keyspan_serial_private *s_priv; 2376 2377 s_priv = usb_get_serial_data(serial); 2378 2379 /* Make sure to unlink the URBs submitted in attach. */ 2380 usb_kill_urb(s_priv->instat_urb); 2381 usb_kill_urb(s_priv->indat_urb); 2382 2383 usb_free_urb(s_priv->instat_urb); 2384 usb_free_urb(s_priv->indat_urb); 2385 usb_free_urb(s_priv->glocont_urb); 2386 2387 kfree(s_priv->ctrl_buf); 2388 kfree(s_priv->glocont_buf); 2389 kfree(s_priv->indat_buf); 2390 kfree(s_priv->instat_buf); 2391 2392 kfree(s_priv); 2393} 2394 2395static int keyspan_port_probe(struct usb_serial_port *port) 2396{ 2397 struct usb_serial *serial = port->serial; 2398 struct keyspan_serial_private *s_priv; 2399 struct keyspan_port_private *p_priv; 2400 const struct keyspan_device_details *d_details; 2401 struct callbacks *cback; 2402 int endp; 2403 int port_num; 2404 int i; 2405 2406 s_priv = usb_get_serial_data(serial); 2407 d_details = s_priv->device_details; 2408 2409 p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL); 2410 if (!p_priv) 2411 return -ENOMEM; 2412 2413 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) { 2414 p_priv->in_buffer[i] = kzalloc(IN_BUFLEN, GFP_KERNEL); 2415 if (!p_priv->in_buffer[i]) 2416 goto err_in_buffer; 2417 } 2418 2419 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) { 2420 p_priv->out_buffer[i] = kzalloc(OUT_BUFLEN, GFP_KERNEL); 2421 if (!p_priv->out_buffer[i]) 2422 goto err_out_buffer; 2423 } 2424 2425 p_priv->inack_buffer = kzalloc(INACK_BUFLEN, GFP_KERNEL); 2426 if (!p_priv->inack_buffer) 2427 goto err_inack_buffer; 2428 2429 p_priv->outcont_buffer = kzalloc(OUTCONT_BUFLEN, GFP_KERNEL); 2430 if (!p_priv->outcont_buffer) 2431 goto err_outcont_buffer; 2432 2433 p_priv->device_details = d_details; 2434 2435 /* Setup values for the various callback routines */ 2436 cback = &keyspan_callbacks[d_details->msg_format]; 2437 2438 port_num = port->port_number; 2439 2440 /* Do indat endpoints first, once for each flip */ 2441 endp = d_details->indat_endpoints[port_num]; 2442 for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) { 2443 p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp, 2444 USB_DIR_IN, port, 2445 p_priv->in_buffer[i], 2446 IN_BUFLEN, 2447 cback->indat_callback); 2448 } 2449 /* outdat endpoints also have flip */ 2450 endp = d_details->outdat_endpoints[port_num]; 2451 for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) { 2452 p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp, 2453 USB_DIR_OUT, port, 2454 p_priv->out_buffer[i], 2455 OUT_BUFLEN, 2456 cback->outdat_callback); 2457 } 2458 /* inack endpoint */ 2459 p_priv->inack_urb = keyspan_setup_urb(serial, 2460 d_details->inack_endpoints[port_num], 2461 USB_DIR_IN, port, 2462 p_priv->inack_buffer, 2463 INACK_BUFLEN, 2464 cback->inack_callback); 2465 /* outcont endpoint */ 2466 p_priv->outcont_urb = keyspan_setup_urb(serial, 2467 d_details->outcont_endpoints[port_num], 2468 USB_DIR_OUT, port, 2469 p_priv->outcont_buffer, 2470 OUTCONT_BUFLEN, 2471 cback->outcont_callback); 2472 2473 usb_set_serial_port_data(port, p_priv); 2474 2475 return 0; 2476 2477err_outcont_buffer: 2478 kfree(p_priv->inack_buffer); 2479err_inack_buffer: 2480 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) 2481 kfree(p_priv->out_buffer[i]); 2482err_out_buffer: 2483 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) 2484 kfree(p_priv->in_buffer[i]); 2485err_in_buffer: 2486 kfree(p_priv); 2487 2488 return -ENOMEM; 2489} 2490 2491static int keyspan_port_remove(struct usb_serial_port *port) 2492{ 2493 struct keyspan_port_private *p_priv; 2494 int i; 2495 2496 p_priv = usb_get_serial_port_data(port); 2497 2498 stop_urb(p_priv->inack_urb); 2499 stop_urb(p_priv->outcont_urb); 2500 for (i = 0; i < 2; i++) { 2501 stop_urb(p_priv->in_urbs[i]); 2502 stop_urb(p_priv->out_urbs[i]); 2503 } 2504 2505 usb_free_urb(p_priv->inack_urb); 2506 usb_free_urb(p_priv->outcont_urb); 2507 for (i = 0; i < 2; i++) { 2508 usb_free_urb(p_priv->in_urbs[i]); 2509 usb_free_urb(p_priv->out_urbs[i]); 2510 } 2511 2512 kfree(p_priv->outcont_buffer); 2513 kfree(p_priv->inack_buffer); 2514 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) 2515 kfree(p_priv->out_buffer[i]); 2516 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) 2517 kfree(p_priv->in_buffer[i]); 2518 2519 kfree(p_priv); 2520 2521 return 0; 2522} 2523 2524MODULE_AUTHOR(DRIVER_AUTHOR); 2525MODULE_DESCRIPTION(DRIVER_DESC); 2526MODULE_LICENSE("GPL"); 2527 2528MODULE_FIRMWARE("keyspan/usa28.fw"); 2529MODULE_FIRMWARE("keyspan/usa28x.fw"); 2530MODULE_FIRMWARE("keyspan/usa28xa.fw"); 2531MODULE_FIRMWARE("keyspan/usa28xb.fw"); 2532MODULE_FIRMWARE("keyspan/usa19.fw"); 2533MODULE_FIRMWARE("keyspan/usa19qi.fw"); 2534MODULE_FIRMWARE("keyspan/mpr.fw"); 2535MODULE_FIRMWARE("keyspan/usa19qw.fw"); 2536MODULE_FIRMWARE("keyspan/usa18x.fw"); 2537MODULE_FIRMWARE("keyspan/usa19w.fw"); 2538MODULE_FIRMWARE("keyspan/usa49w.fw"); 2539MODULE_FIRMWARE("keyspan/usa49wlc.fw"); 2540