1# 2# for USB OTG silicon based on Mentor Graphics INVENTRA designs 3# 4 5obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o 6 7musb_hdrc-y := musb_core.o 8 9musb_hdrc-$(CONFIG_USB_MUSB_HOST)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_virthub.o musb_host.o 10musb_hdrc-$(CONFIG_USB_MUSB_GADGET)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_gadget_ep0.o musb_gadget.o 11musb_hdrc-$(CONFIG_DEBUG_FS) += musb_debugfs.o 12 13# Hardware Glue Layer 14obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o 15obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o 16obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o 17obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o 18obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o 19obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o 20obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o 21obj-$(CONFIG_USB_MUSB_UX500) += ux500.o 22obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o 23 24 25obj-$(CONFIG_USB_MUSB_AM335X_CHILD) += musb_am335x.o 26 27# the kconfig must guarantee that only one of the 28# possible I/O schemes will be enabled at a time ... 29# PIO only, or DMA (several potential schemes). 30# though PIO is always there to back up DMA, and for ep0 31 32musb_hdrc-$(CONFIG_USB_INVENTRA_DMA) += musbhsdma.o 33musb_hdrc-$(CONFIG_USB_TI_CPPI_DMA) += cppi_dma.o 34musb_hdrc-$(CONFIG_USB_TUSB_OMAP_DMA) += tusb6010_omap.o 35musb_hdrc-$(CONFIG_USB_UX500_DMA) += ux500_dma.o 36musb_hdrc-$(CONFIG_USB_TI_CPPI41_DMA) += musb_cppi41.o 37