1#
2# USB Dual Role (OTG-ready) Controller Drivers
3# for silicon based on Mentor Graphics INVENTRA designs
4#
5
6# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
7config USB_MUSB_HDRC
8	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
9	depends on (USB || USB_GADGET)
10	help
11	  Say Y here if your system has a dual role high speed USB
12	  controller based on the Mentor Graphics silicon IP.  Then
13	  configure options to match your silicon and the board
14	  it's being used with, including the USB peripheral role,
15	  or the USB host role, or both.
16
17	  Texas Instruments families using this IP include DaVinci
18	  (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
19
20	  Analog Devices parts using this IP include Blackfin BF54x,
21	  BF525 and BF527.
22
23	  If you do not know what this is, please say N.
24
25	  To compile this driver as a module, choose M here; the
26	  module will be called "musb-hdrc".
27
28if USB_MUSB_HDRC
29
30choice
31	bool "MUSB Mode Selection"
32	default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
33	default USB_MUSB_HOST if (USB && !USB_GADGET)
34	default USB_MUSB_GADGET if (!USB && USB_GADGET)
35
36config USB_MUSB_HOST
37	bool "Host only mode"
38	depends on USB=y || USB=USB_MUSB_HDRC
39	help
40	  Select this when you want to use MUSB in host mode only,
41	  thereby the gadget feature will be regressed.
42
43config USB_MUSB_GADGET
44	bool "Gadget only mode"
45	depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
46	depends on HAS_DMA
47	help
48	  Select this when you want to use MUSB in gadget mode only,
49	  thereby the host feature will be regressed.
50
51config USB_MUSB_DUAL_ROLE
52	bool "Dual Role mode"
53	depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
54	depends on HAS_DMA
55	help
56	  This is the default mode of working of MUSB controller where
57	  both host and gadget features are enabled.
58
59endchoice
60
61comment "Platform Glue Layer"
62
63config USB_MUSB_DAVINCI
64	tristate "DaVinci"
65	depends on ARCH_DAVINCI_DMx
66	depends on NOP_USB_XCEIV
67	depends on BROKEN
68
69config USB_MUSB_DA8XX
70	tristate "DA8xx/OMAP-L1x"
71	depends on ARCH_DAVINCI_DA8XX
72	depends on NOP_USB_XCEIV
73	depends on BROKEN
74
75config USB_MUSB_TUSB6010
76	tristate "TUSB6010"
77	depends on ARCH_OMAP2PLUS || COMPILE_TEST
78	depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
79
80config USB_MUSB_OMAP2PLUS
81	tristate "OMAP2430 and onwards"
82	depends on ARCH_OMAP2PLUS && USB
83	depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY
84	select GENERIC_PHY
85
86config USB_MUSB_AM35X
87	tristate "AM35x"
88	depends on ARCH_OMAP
89	depends on NOP_USB_XCEIV
90
91config USB_MUSB_DSPS
92	tristate "TI DSPS platforms"
93	select USB_MUSB_AM335X_CHILD
94	depends on ARCH_OMAP2PLUS || COMPILE_TEST
95	depends on OF_IRQ
96
97config USB_MUSB_BLACKFIN
98	tristate "Blackfin"
99	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
100	depends on NOP_USB_XCEIV
101
102config USB_MUSB_UX500
103	tristate "Ux500 platforms"
104	depends on ARCH_U8500 || COMPILE_TEST
105
106config USB_MUSB_JZ4740
107	tristate "JZ4740"
108	depends on NOP_USB_XCEIV
109	depends on MACH_JZ4740 || COMPILE_TEST
110	depends on USB_MUSB_GADGET
111	depends on USB_OTG_BLACKLIST_HUB
112
113config USB_MUSB_AM335X_CHILD
114	tristate
115
116choice
117	prompt 'MUSB DMA mode'
118	default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM || USB_MUSB_JZ4740
119	default USB_UX500_DMA if USB_MUSB_UX500
120	default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
121	default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI
122	default USB_TUSB_OMAP_DMA if USB_MUSB_TUSB6010
123	default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X \
124				|| USB_MUSB_DSPS
125	help
126	  Unfortunately, only one option can be enabled here. Ideally one
127	  should be able to build all these drivers into one kernel to
128	  allow using DMA on multiplatform kernels.
129
130config USB_UX500_DMA
131	bool 'ST Ericsson Ux500'
132	depends on USB_MUSB_UX500
133	help
134	  Enable DMA transfers on UX500 platforms.
135
136config USB_INVENTRA_DMA
137	bool 'Inventra'
138	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
139	help
140	  Enable DMA transfers using Mentor's engine.
141
142config USB_TI_CPPI_DMA
143	bool 'TI CPPI (Davinci)'
144	depends on USB_MUSB_DAVINCI
145	help
146	  Enable DMA transfers when TI CPPI DMA is available.
147
148config USB_TI_CPPI41_DMA
149	bool 'TI CPPI 4.1 (AM335x)'
150	depends on ARCH_OMAP && DMADEVICES
151	select TI_CPPI41
152
153config USB_TUSB_OMAP_DMA
154	bool 'TUSB 6010'
155	depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
156	depends on ARCH_OMAP
157	help
158	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
159
160config MUSB_PIO_ONLY
161	bool 'Disable DMA (always use PIO)'
162	help
163	  All data is copied between memory and FIFO by the CPU.
164	  DMA controllers are ignored.
165
166	  Do not choose this unless DMA support for your SOC or board
167	  is unavailable (or unstable).  When DMA is enabled at compile time,
168	  you can still disable it at run time using the "use_dma=n" module
169	  parameter.
170
171endchoice
172
173endif # USB_MUSB_HDRC
174