1/*
2 * ohci-omap3.c - driver for OHCI on OMAP3 and later processors
3 *
4 * Bus Glue for OMAP3 USBHOST 3 port OHCI controller
5 * This controller is also used in later OMAPs and AM35x chips
6 *
7 * Copyright (C) 2007-2010 Texas Instruments, Inc.
8 * Author: Vikram Pandita <vikram.pandita@ti.com>
9 * Author: Anand Gadiyar <gadiyar@ti.com>
10 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
11 *
12 * Based on ehci-omap.c and some other ohci glue layers
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or
17 * (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
27 *
28 * TODO (last updated Feb 27, 2011):
29 *	- add kernel-doc
30 */
31
32#include <linux/dma-mapping.h>
33#include <linux/kernel.h>
34#include <linux/module.h>
35#include <linux/of.h>
36#include <linux/usb/otg.h>
37#include <linux/platform_device.h>
38#include <linux/pm_runtime.h>
39#include <linux/usb.h>
40#include <linux/usb/hcd.h>
41
42#include "ohci.h"
43
44#define DRIVER_DESC "OHCI OMAP3 driver"
45
46static const char hcd_name[] = "ohci-omap3";
47static struct hc_driver __read_mostly ohci_omap3_hc_driver;
48
49/*
50 * configure so an HC device and id are always provided
51 * always called with process context; sleeping is OK
52 */
53
54/**
55 * ohci_hcd_omap3_probe - initialize OMAP-based HCDs
56 *
57 * Allocates basic resources for this USB host controller, and
58 * then invokes the start() method for the HCD associated with it
59 * through the hotplug entry's driver_data.
60 */
61static int ohci_hcd_omap3_probe(struct platform_device *pdev)
62{
63	struct device		*dev = &pdev->dev;
64	struct ohci_hcd		*ohci;
65	struct usb_hcd		*hcd = NULL;
66	void __iomem		*regs = NULL;
67	struct resource		*res;
68	int			ret;
69	int			irq;
70
71	if (usb_disabled())
72		return -ENODEV;
73
74	if (!dev->parent) {
75		dev_err(dev, "Missing parent device\n");
76		return -ENODEV;
77	}
78
79	irq = platform_get_irq(pdev, 0);
80	if (irq < 0) {
81		dev_err(dev, "OHCI irq failed\n");
82		return -ENODEV;
83	}
84
85	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
86	if (!res) {
87		dev_err(dev, "UHH OHCI get resource failed\n");
88		return -ENOMEM;
89	}
90
91	regs = ioremap(res->start, resource_size(res));
92	if (!regs) {
93		dev_err(dev, "UHH OHCI ioremap failed\n");
94		return -ENOMEM;
95	}
96
97	/*
98	 * Right now device-tree probed devices don't get dma_mask set.
99	 * Since shared usb code relies on it, set it here for now.
100	 * Once we have dma capability bindings this can go away.
101	 */
102	ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
103	if (ret)
104		goto err_io;
105
106	ret = -ENODEV;
107	hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
108			dev_name(dev));
109	if (!hcd) {
110		dev_err(dev, "usb_create_hcd failed\n");
111		goto err_io;
112	}
113
114	hcd->rsrc_start = res->start;
115	hcd->rsrc_len = resource_size(res);
116	hcd->regs =  regs;
117
118	pm_runtime_enable(dev);
119	pm_runtime_get_sync(dev);
120
121	ohci = hcd_to_ohci(hcd);
122	/*
123	 * RemoteWakeupConnected has to be set explicitly before
124	 * calling ohci_run. The reset value of RWC is 0.
125	 */
126	ohci->hc_control = OHCI_CTRL_RWC;
127
128	ret = usb_add_hcd(hcd, irq, 0);
129	if (ret) {
130		dev_dbg(dev, "failed to add hcd with err %d\n", ret);
131		goto err_add_hcd;
132	}
133	device_wakeup_enable(hcd->self.controller);
134
135	return 0;
136
137err_add_hcd:
138	pm_runtime_put_sync(dev);
139	usb_put_hcd(hcd);
140
141err_io:
142	iounmap(regs);
143
144	return ret;
145}
146
147/*
148 * may be called without controller electrically present
149 * may be called with controller, bus, and devices active
150 */
151
152/**
153 * ohci_hcd_omap3_remove - shutdown processing for OHCI HCDs
154 * @pdev: USB Host Controller being removed
155 *
156 * Reverses the effect of ohci_hcd_omap3_probe(), first invoking
157 * the HCD's stop() method.  It is always called from a thread
158 * context, normally "rmmod", "apmd", or something similar.
159 */
160static int ohci_hcd_omap3_remove(struct platform_device *pdev)
161{
162	struct device *dev	= &pdev->dev;
163	struct usb_hcd *hcd	= dev_get_drvdata(dev);
164
165	iounmap(hcd->regs);
166	usb_remove_hcd(hcd);
167	pm_runtime_put_sync(dev);
168	pm_runtime_disable(dev);
169	usb_put_hcd(hcd);
170	return 0;
171}
172
173static const struct of_device_id omap_ohci_dt_ids[] = {
174	{ .compatible = "ti,ohci-omap3" },
175	{ }
176};
177
178MODULE_DEVICE_TABLE(of, omap_ohci_dt_ids);
179
180static struct platform_driver ohci_hcd_omap3_driver = {
181	.probe		= ohci_hcd_omap3_probe,
182	.remove		= ohci_hcd_omap3_remove,
183	.shutdown	= usb_hcd_platform_shutdown,
184	.driver		= {
185		.name	= "ohci-omap3",
186		.of_match_table = omap_ohci_dt_ids,
187	},
188};
189
190static int __init ohci_omap3_init(void)
191{
192	if (usb_disabled())
193		return -ENODEV;
194
195	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
196
197	ohci_init_driver(&ohci_omap3_hc_driver, NULL);
198	return platform_driver_register(&ohci_hcd_omap3_driver);
199}
200module_init(ohci_omap3_init);
201
202static void __exit ohci_omap3_cleanup(void)
203{
204	platform_driver_unregister(&ohci_hcd_omap3_driver);
205}
206module_exit(ohci_omap3_cleanup);
207
208MODULE_DESCRIPTION(DRIVER_DESC);
209MODULE_ALIAS("platform:ohci-omap3");
210MODULE_AUTHOR("Anand Gadiyar <gadiyar@ti.com>");
211MODULE_LICENSE("GPL");
212