1#
2# USB device configuration
3#
4
5config USB_OHCI_BIG_ENDIAN_DESC
6	bool
7
8config USB_OHCI_BIG_ENDIAN_MMIO
9	bool
10
11config USB_OHCI_LITTLE_ENDIAN
12	bool
13	default n if STB03xxx || PPC_MPC52xx
14	default y
15
16config USB_EHCI_BIG_ENDIAN_MMIO
17	bool
18
19config USB_EHCI_BIG_ENDIAN_DESC
20	bool
21
22menuconfig USB_SUPPORT
23	bool "USB support"
24	depends on HAS_IOMEM
25	default y
26	---help---
27	  This option adds core support for Universal Serial Bus (USB).
28	  You will also need drivers from the following menu to make use of it.
29
30if USB_SUPPORT
31
32config USB_COMMON
33	tristate
34	default y
35	depends on USB || USB_GADGET
36
37config USB_ARCH_HAS_HCD
38	def_bool y
39
40# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
41config USB
42	tristate "Support for Host-side USB"
43	depends on USB_ARCH_HAS_HCD
44	select NLS  # for UTF-8 strings
45	---help---
46	  Universal Serial Bus (USB) is a specification for a serial bus
47	  subsystem which offers higher speeds and more features than the
48	  traditional PC serial port.  The bus supplies power to peripherals
49	  and allows for hot swapping.  Up to 127 USB peripherals can be
50	  connected to a single USB host in a tree structure.
51	  
52	  The USB host is the root of the tree, the peripherals are the
53	  leaves and the inner nodes are special USB devices called hubs.
54	  Most PCs now have USB host ports, used to connect peripherals
55	  such as scanners, keyboards, mice, modems, cameras, disks,
56	  flash memory, network links, and printers to the PC.
57
58	  Say Y here if your computer has a host-side USB port and you want
59	  to use USB devices.  You then need to say Y to at least one of the
60	  Host Controller Driver (HCD) options below.  Choose a USB 1.1
61	  controller, such as "UHCI HCD support" or "OHCI HCD support",
62	  and "EHCI HCD (USB 2.0) support" except for older systems that
63	  do not have USB 2.0 support.  It doesn't normally hurt to select
64	  them all if you are not certain.
65
66	  If your system has a device-side USB port, used in the peripheral
67	  side of the USB protocol, see the "USB Gadget" framework instead.
68
69	  After choosing your HCD, then select drivers for the USB peripherals
70	  you'll be using.  You may want to check out the information provided
71	  in <file:Documentation/usb/> and especially the links given in
72	  <file:Documentation/usb/usb-help.txt>.
73
74	  To compile this driver as a module, choose M here: the
75	  module will be called usbcore.
76
77if USB
78
79source "drivers/usb/core/Kconfig"
80
81source "drivers/usb/mon/Kconfig"
82
83source "drivers/usb/wusbcore/Kconfig"
84
85source "drivers/usb/host/Kconfig"
86
87source "drivers/usb/renesas_usbhs/Kconfig"
88
89source "drivers/usb/class/Kconfig"
90
91source "drivers/usb/storage/Kconfig"
92
93source "drivers/usb/image/Kconfig"
94
95source "drivers/usb/usbip/Kconfig"
96
97endif
98
99source "drivers/usb/musb/Kconfig"
100
101source "drivers/usb/dwc3/Kconfig"
102
103source "drivers/usb/dwc2/Kconfig"
104
105source "drivers/usb/chipidea/Kconfig"
106
107source "drivers/usb/isp1760/Kconfig"
108
109comment "USB port drivers"
110
111if USB
112
113config USB_USS720
114	tristate "USS720 parport driver"
115	depends on PARPORT
116	select PARPORT_NOT_PC
117	---help---
118	  This driver is for USB parallel port adapters that use the Lucent
119	  Technologies USS-720 chip. These cables are plugged into your USB
120	  port and provide USB compatibility to peripherals designed with
121	  parallel port interfaces.
122
123	  The chip has two modes: automatic mode and manual mode. In automatic
124	  mode, it looks to the computer like a standard USB printer. Only
125	  printers may be connected to the USS-720 in this mode. The generic
126	  USB printer driver ("USB Printer support", above) may be used in
127	  that mode, and you can say N here if you want to use the chip only
128	  in this mode.
129
130	  Manual mode is not limited to printers, any parallel port
131	  device should work. This driver utilizes manual mode.
132	  Note however that some operations are three orders of magnitude
133	  slower than on a PCI/ISA Parallel Port, so timing critical
134	  applications might not work.
135
136	  Say Y here if you own an USS-720 USB->Parport cable and intend to
137	  connect anything other than a printer to it.
138
139	  To compile this driver as a module, choose M here: the
140	  module will be called uss720.
141
142source "drivers/usb/serial/Kconfig"
143
144source "drivers/usb/misc/Kconfig"
145
146source "drivers/usb/atm/Kconfig"
147
148endif # USB
149
150source "drivers/usb/phy/Kconfig"
151
152source "drivers/usb/gadget/Kconfig"
153
154config USB_LED_TRIG
155	bool "USB LED Triggers"
156	depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS
157	help
158	  This option adds LED triggers for USB host and/or gadget activity.
159
160	  Say Y here if you are working on a system with led-class supported
161	  LEDs and you want to use them as activity indicators for USB host or
162	  gadget.
163
164endif # USB_SUPPORT
165