1/* 2 * au1550 psc spi controller driver 3 * may work also with au1200, au1210, au1250 4 * will not work on au1000, au1100 and au1500 (no full spi controller there) 5 * 6 * Copyright (c) 2006 ATRON electronic GmbH 7 * Author: Jan Nikitenko <jan.nikitenko@gmail.com> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 */ 19 20#include <linux/init.h> 21#include <linux/interrupt.h> 22#include <linux/slab.h> 23#include <linux/errno.h> 24#include <linux/module.h> 25#include <linux/device.h> 26#include <linux/platform_device.h> 27#include <linux/resource.h> 28#include <linux/spi/spi.h> 29#include <linux/spi/spi_bitbang.h> 30#include <linux/dma-mapping.h> 31#include <linux/completion.h> 32#include <asm/mach-au1x00/au1000.h> 33#include <asm/mach-au1x00/au1xxx_psc.h> 34#include <asm/mach-au1x00/au1xxx_dbdma.h> 35 36#include <asm/mach-au1x00/au1550_spi.h> 37 38static unsigned usedma = 1; 39module_param(usedma, uint, 0644); 40 41/* 42#define AU1550_SPI_DEBUG_LOOPBACK 43*/ 44 45 46#define AU1550_SPI_DBDMA_DESCRIPTORS 1 47#define AU1550_SPI_DMA_RXTMP_MINSIZE 2048U 48 49struct au1550_spi { 50 struct spi_bitbang bitbang; 51 52 volatile psc_spi_t __iomem *regs; 53 int irq; 54 55 unsigned len; 56 unsigned tx_count; 57 unsigned rx_count; 58 const u8 *tx; 59 u8 *rx; 60 61 void (*rx_word)(struct au1550_spi *hw); 62 void (*tx_word)(struct au1550_spi *hw); 63 int (*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t); 64 irqreturn_t (*irq_callback)(struct au1550_spi *hw); 65 66 struct completion master_done; 67 68 unsigned usedma; 69 u32 dma_tx_id; 70 u32 dma_rx_id; 71 u32 dma_tx_ch; 72 u32 dma_rx_ch; 73 74 u8 *dma_rx_tmpbuf; 75 unsigned dma_rx_tmpbuf_size; 76 u32 dma_rx_tmpbuf_addr; 77 78 struct spi_master *master; 79 struct device *dev; 80 struct au1550_spi_info *pdata; 81 struct resource *ioarea; 82}; 83 84 85/* we use an 8-bit memory device for dma transfers to/from spi fifo */ 86static dbdev_tab_t au1550_spi_mem_dbdev = 87{ 88 .dev_id = DBDMA_MEM_CHAN, 89 .dev_flags = DEV_FLAGS_ANYUSE|DEV_FLAGS_SYNC, 90 .dev_tsize = 0, 91 .dev_devwidth = 8, 92 .dev_physaddr = 0x00000000, 93 .dev_intlevel = 0, 94 .dev_intpolarity = 0 95}; 96 97static int ddma_memid; /* id to above mem dma device */ 98 99static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw); 100 101 102/* 103 * compute BRG and DIV bits to setup spi clock based on main input clock rate 104 * that was specified in platform data structure 105 * according to au1550 datasheet: 106 * psc_tempclk = psc_mainclk / (2 << DIV) 107 * spiclk = psc_tempclk / (2 * (BRG + 1)) 108 * BRG valid range is 4..63 109 * DIV valid range is 0..3 110 */ 111static u32 au1550_spi_baudcfg(struct au1550_spi *hw, unsigned speed_hz) 112{ 113 u32 mainclk_hz = hw->pdata->mainclk_hz; 114 u32 div, brg; 115 116 for (div = 0; div < 4; div++) { 117 brg = mainclk_hz / speed_hz / (4 << div); 118 /* now we have BRG+1 in brg, so count with that */ 119 if (brg < (4 + 1)) { 120 brg = (4 + 1); /* speed_hz too big */ 121 break; /* set lowest brg (div is == 0) */ 122 } 123 if (brg <= (63 + 1)) 124 break; /* we have valid brg and div */ 125 } 126 if (div == 4) { 127 div = 3; /* speed_hz too small */ 128 brg = (63 + 1); /* set highest brg and div */ 129 } 130 brg--; 131 return PSC_SPICFG_SET_BAUD(brg) | PSC_SPICFG_SET_DIV(div); 132} 133 134static inline void au1550_spi_mask_ack_all(struct au1550_spi *hw) 135{ 136 hw->regs->psc_spimsk = 137 PSC_SPIMSK_MM | PSC_SPIMSK_RR | PSC_SPIMSK_RO 138 | PSC_SPIMSK_RU | PSC_SPIMSK_TR | PSC_SPIMSK_TO 139 | PSC_SPIMSK_TU | PSC_SPIMSK_SD | PSC_SPIMSK_MD; 140 wmb(); /* drain writebuffer */ 141 142 hw->regs->psc_spievent = 143 PSC_SPIEVNT_MM | PSC_SPIEVNT_RR | PSC_SPIEVNT_RO 144 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TR | PSC_SPIEVNT_TO 145 | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD | PSC_SPIEVNT_MD; 146 wmb(); /* drain writebuffer */ 147} 148 149static void au1550_spi_reset_fifos(struct au1550_spi *hw) 150{ 151 u32 pcr; 152 153 hw->regs->psc_spipcr = PSC_SPIPCR_RC | PSC_SPIPCR_TC; 154 wmb(); /* drain writebuffer */ 155 do { 156 pcr = hw->regs->psc_spipcr; 157 wmb(); /* drain writebuffer */ 158 } while (pcr != 0); 159} 160 161/* 162 * dma transfers are used for the most common spi word size of 8-bits 163 * we cannot easily change already set up dma channels' width, so if we wanted 164 * dma support for more than 8-bit words (up to 24 bits), we would need to 165 * setup dma channels from scratch on each spi transfer, based on bits_per_word 166 * instead we have pre set up 8 bit dma channels supporting spi 4 to 8 bits 167 * transfers, and 9 to 24 bits spi transfers will be done in pio irq based mode 168 * callbacks to handle dma or pio are set up in au1550_spi_bits_handlers_set() 169 */ 170static void au1550_spi_chipsel(struct spi_device *spi, int value) 171{ 172 struct au1550_spi *hw = spi_master_get_devdata(spi->master); 173 unsigned cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; 174 u32 cfg, stat; 175 176 switch (value) { 177 case BITBANG_CS_INACTIVE: 178 if (hw->pdata->deactivate_cs) 179 hw->pdata->deactivate_cs(hw->pdata, spi->chip_select, 180 cspol); 181 break; 182 183 case BITBANG_CS_ACTIVE: 184 au1550_spi_bits_handlers_set(hw, spi->bits_per_word); 185 186 cfg = hw->regs->psc_spicfg; 187 wmb(); /* drain writebuffer */ 188 hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE; 189 wmb(); /* drain writebuffer */ 190 191 if (spi->mode & SPI_CPOL) 192 cfg |= PSC_SPICFG_BI; 193 else 194 cfg &= ~PSC_SPICFG_BI; 195 if (spi->mode & SPI_CPHA) 196 cfg &= ~PSC_SPICFG_CDE; 197 else 198 cfg |= PSC_SPICFG_CDE; 199 200 if (spi->mode & SPI_LSB_FIRST) 201 cfg |= PSC_SPICFG_MLF; 202 else 203 cfg &= ~PSC_SPICFG_MLF; 204 205 if (hw->usedma && spi->bits_per_word <= 8) 206 cfg &= ~PSC_SPICFG_DD_DISABLE; 207 else 208 cfg |= PSC_SPICFG_DD_DISABLE; 209 cfg = PSC_SPICFG_CLR_LEN(cfg); 210 cfg |= PSC_SPICFG_SET_LEN(spi->bits_per_word); 211 212 cfg = PSC_SPICFG_CLR_BAUD(cfg); 213 cfg &= ~PSC_SPICFG_SET_DIV(3); 214 cfg |= au1550_spi_baudcfg(hw, spi->max_speed_hz); 215 216 hw->regs->psc_spicfg = cfg | PSC_SPICFG_DE_ENABLE; 217 wmb(); /* drain writebuffer */ 218 do { 219 stat = hw->regs->psc_spistat; 220 wmb(); /* drain writebuffer */ 221 } while ((stat & PSC_SPISTAT_DR) == 0); 222 223 if (hw->pdata->activate_cs) 224 hw->pdata->activate_cs(hw->pdata, spi->chip_select, 225 cspol); 226 break; 227 } 228} 229 230static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) 231{ 232 struct au1550_spi *hw = spi_master_get_devdata(spi->master); 233 unsigned bpw, hz; 234 u32 cfg, stat; 235 236 bpw = spi->bits_per_word; 237 hz = spi->max_speed_hz; 238 if (t) { 239 if (t->bits_per_word) 240 bpw = t->bits_per_word; 241 if (t->speed_hz) 242 hz = t->speed_hz; 243 } 244 245 if (!hz) 246 return -EINVAL; 247 248 au1550_spi_bits_handlers_set(hw, spi->bits_per_word); 249 250 cfg = hw->regs->psc_spicfg; 251 wmb(); /* drain writebuffer */ 252 hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE; 253 wmb(); /* drain writebuffer */ 254 255 if (hw->usedma && bpw <= 8) 256 cfg &= ~PSC_SPICFG_DD_DISABLE; 257 else 258 cfg |= PSC_SPICFG_DD_DISABLE; 259 cfg = PSC_SPICFG_CLR_LEN(cfg); 260 cfg |= PSC_SPICFG_SET_LEN(bpw); 261 262 cfg = PSC_SPICFG_CLR_BAUD(cfg); 263 cfg &= ~PSC_SPICFG_SET_DIV(3); 264 cfg |= au1550_spi_baudcfg(hw, hz); 265 266 hw->regs->psc_spicfg = cfg; 267 wmb(); /* drain writebuffer */ 268 269 if (cfg & PSC_SPICFG_DE_ENABLE) { 270 do { 271 stat = hw->regs->psc_spistat; 272 wmb(); /* drain writebuffer */ 273 } while ((stat & PSC_SPISTAT_DR) == 0); 274 } 275 276 au1550_spi_reset_fifos(hw); 277 au1550_spi_mask_ack_all(hw); 278 return 0; 279} 280 281/* 282 * for dma spi transfers, we have to setup rx channel, otherwise there is 283 * no reliable way how to recognize that spi transfer is done 284 * dma complete callbacks are called before real spi transfer is finished 285 * and if only tx dma channel is set up (and rx fifo overflow event masked) 286 * spi master done event irq is not generated unless rx fifo is empty (emptied) 287 * so we need rx tmp buffer to use for rx dma if user does not provide one 288 */ 289static int au1550_spi_dma_rxtmp_alloc(struct au1550_spi *hw, unsigned size) 290{ 291 hw->dma_rx_tmpbuf = kmalloc(size, GFP_KERNEL); 292 if (!hw->dma_rx_tmpbuf) 293 return -ENOMEM; 294 hw->dma_rx_tmpbuf_size = size; 295 hw->dma_rx_tmpbuf_addr = dma_map_single(hw->dev, hw->dma_rx_tmpbuf, 296 size, DMA_FROM_DEVICE); 297 if (dma_mapping_error(hw->dev, hw->dma_rx_tmpbuf_addr)) { 298 kfree(hw->dma_rx_tmpbuf); 299 hw->dma_rx_tmpbuf = 0; 300 hw->dma_rx_tmpbuf_size = 0; 301 return -EFAULT; 302 } 303 return 0; 304} 305 306static void au1550_spi_dma_rxtmp_free(struct au1550_spi *hw) 307{ 308 dma_unmap_single(hw->dev, hw->dma_rx_tmpbuf_addr, 309 hw->dma_rx_tmpbuf_size, DMA_FROM_DEVICE); 310 kfree(hw->dma_rx_tmpbuf); 311 hw->dma_rx_tmpbuf = 0; 312 hw->dma_rx_tmpbuf_size = 0; 313} 314 315static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) 316{ 317 struct au1550_spi *hw = spi_master_get_devdata(spi->master); 318 dma_addr_t dma_tx_addr; 319 dma_addr_t dma_rx_addr; 320 u32 res; 321 322 hw->len = t->len; 323 hw->tx_count = 0; 324 hw->rx_count = 0; 325 326 hw->tx = t->tx_buf; 327 hw->rx = t->rx_buf; 328 dma_tx_addr = t->tx_dma; 329 dma_rx_addr = t->rx_dma; 330 331 /* 332 * check if buffers are already dma mapped, map them otherwise: 333 * - first map the TX buffer, so cache data gets written to memory 334 * - then map the RX buffer, so that cache entries (with 335 * soon-to-be-stale data) get removed 336 * use rx buffer in place of tx if tx buffer was not provided 337 * use temp rx buffer (preallocated or realloc to fit) for rx dma 338 */ 339 if (t->tx_buf) { 340 if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ 341 dma_tx_addr = dma_map_single(hw->dev, 342 (void *)t->tx_buf, 343 t->len, DMA_TO_DEVICE); 344 if (dma_mapping_error(hw->dev, dma_tx_addr)) 345 dev_err(hw->dev, "tx dma map error\n"); 346 } 347 } 348 349 if (t->rx_buf) { 350 if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ 351 dma_rx_addr = dma_map_single(hw->dev, 352 (void *)t->rx_buf, 353 t->len, DMA_FROM_DEVICE); 354 if (dma_mapping_error(hw->dev, dma_rx_addr)) 355 dev_err(hw->dev, "rx dma map error\n"); 356 } 357 } else { 358 if (t->len > hw->dma_rx_tmpbuf_size) { 359 int ret; 360 361 au1550_spi_dma_rxtmp_free(hw); 362 ret = au1550_spi_dma_rxtmp_alloc(hw, max(t->len, 363 AU1550_SPI_DMA_RXTMP_MINSIZE)); 364 if (ret < 0) 365 return ret; 366 } 367 hw->rx = hw->dma_rx_tmpbuf; 368 dma_rx_addr = hw->dma_rx_tmpbuf_addr; 369 dma_sync_single_for_device(hw->dev, dma_rx_addr, 370 t->len, DMA_FROM_DEVICE); 371 } 372 373 if (!t->tx_buf) { 374 dma_sync_single_for_device(hw->dev, dma_rx_addr, 375 t->len, DMA_BIDIRECTIONAL); 376 hw->tx = hw->rx; 377 } 378 379 /* put buffers on the ring */ 380 res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, virt_to_phys(hw->rx), 381 t->len, DDMA_FLAGS_IE); 382 if (!res) 383 dev_err(hw->dev, "rx dma put dest error\n"); 384 385 res = au1xxx_dbdma_put_source(hw->dma_tx_ch, virt_to_phys(hw->tx), 386 t->len, DDMA_FLAGS_IE); 387 if (!res) 388 dev_err(hw->dev, "tx dma put source error\n"); 389 390 au1xxx_dbdma_start(hw->dma_rx_ch); 391 au1xxx_dbdma_start(hw->dma_tx_ch); 392 393 /* by default enable nearly all events interrupt */ 394 hw->regs->psc_spimsk = PSC_SPIMSK_SD; 395 wmb(); /* drain writebuffer */ 396 397 /* start the transfer */ 398 hw->regs->psc_spipcr = PSC_SPIPCR_MS; 399 wmb(); /* drain writebuffer */ 400 401 wait_for_completion(&hw->master_done); 402 403 au1xxx_dbdma_stop(hw->dma_tx_ch); 404 au1xxx_dbdma_stop(hw->dma_rx_ch); 405 406 if (!t->rx_buf) { 407 /* using the temporal preallocated and premapped buffer */ 408 dma_sync_single_for_cpu(hw->dev, dma_rx_addr, t->len, 409 DMA_FROM_DEVICE); 410 } 411 /* unmap buffers if mapped above */ 412 if (t->rx_buf && t->rx_dma == 0 ) 413 dma_unmap_single(hw->dev, dma_rx_addr, t->len, 414 DMA_FROM_DEVICE); 415 if (t->tx_buf && t->tx_dma == 0 ) 416 dma_unmap_single(hw->dev, dma_tx_addr, t->len, 417 DMA_TO_DEVICE); 418 419 return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count; 420} 421 422static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw) 423{ 424 u32 stat, evnt; 425 426 stat = hw->regs->psc_spistat; 427 evnt = hw->regs->psc_spievent; 428 wmb(); /* drain writebuffer */ 429 if ((stat & PSC_SPISTAT_DI) == 0) { 430 dev_err(hw->dev, "Unexpected IRQ!\n"); 431 return IRQ_NONE; 432 } 433 434 if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO 435 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO 436 | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD)) 437 != 0) { 438 /* 439 * due to an spi error we consider transfer as done, 440 * so mask all events until before next transfer start 441 * and stop the possibly running dma immediately 442 */ 443 au1550_spi_mask_ack_all(hw); 444 au1xxx_dbdma_stop(hw->dma_rx_ch); 445 au1xxx_dbdma_stop(hw->dma_tx_ch); 446 447 /* get number of transferred bytes */ 448 hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch); 449 hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch); 450 451 au1xxx_dbdma_reset(hw->dma_rx_ch); 452 au1xxx_dbdma_reset(hw->dma_tx_ch); 453 au1550_spi_reset_fifos(hw); 454 455 if (evnt == PSC_SPIEVNT_RO) 456 dev_err(hw->dev, 457 "dma transfer: receive FIFO overflow!\n"); 458 else 459 dev_err(hw->dev, 460 "dma transfer: unexpected SPI error " 461 "(event=0x%x stat=0x%x)!\n", evnt, stat); 462 463 complete(&hw->master_done); 464 return IRQ_HANDLED; 465 } 466 467 if ((evnt & PSC_SPIEVNT_MD) != 0) { 468 /* transfer completed successfully */ 469 au1550_spi_mask_ack_all(hw); 470 hw->rx_count = hw->len; 471 hw->tx_count = hw->len; 472 complete(&hw->master_done); 473 } 474 return IRQ_HANDLED; 475} 476 477 478/* routines to handle different word sizes in pio mode */ 479#define AU1550_SPI_RX_WORD(size, mask) \ 480static void au1550_spi_rx_word_##size(struct au1550_spi *hw) \ 481{ \ 482 u32 fifoword = hw->regs->psc_spitxrx & (u32)(mask); \ 483 wmb(); /* drain writebuffer */ \ 484 if (hw->rx) { \ 485 *(u##size *)hw->rx = (u##size)fifoword; \ 486 hw->rx += (size) / 8; \ 487 } \ 488 hw->rx_count += (size) / 8; \ 489} 490 491#define AU1550_SPI_TX_WORD(size, mask) \ 492static void au1550_spi_tx_word_##size(struct au1550_spi *hw) \ 493{ \ 494 u32 fifoword = 0; \ 495 if (hw->tx) { \ 496 fifoword = *(u##size *)hw->tx & (u32)(mask); \ 497 hw->tx += (size) / 8; \ 498 } \ 499 hw->tx_count += (size) / 8; \ 500 if (hw->tx_count >= hw->len) \ 501 fifoword |= PSC_SPITXRX_LC; \ 502 hw->regs->psc_spitxrx = fifoword; \ 503 wmb(); /* drain writebuffer */ \ 504} 505 506AU1550_SPI_RX_WORD(8,0xff) 507AU1550_SPI_RX_WORD(16,0xffff) 508AU1550_SPI_RX_WORD(32,0xffffff) 509AU1550_SPI_TX_WORD(8,0xff) 510AU1550_SPI_TX_WORD(16,0xffff) 511AU1550_SPI_TX_WORD(32,0xffffff) 512 513static int au1550_spi_pio_txrxb(struct spi_device *spi, struct spi_transfer *t) 514{ 515 u32 stat, mask; 516 struct au1550_spi *hw = spi_master_get_devdata(spi->master); 517 518 hw->tx = t->tx_buf; 519 hw->rx = t->rx_buf; 520 hw->len = t->len; 521 hw->tx_count = 0; 522 hw->rx_count = 0; 523 524 /* by default enable nearly all events after filling tx fifo */ 525 mask = PSC_SPIMSK_SD; 526 527 /* fill the transmit FIFO */ 528 while (hw->tx_count < hw->len) { 529 530 hw->tx_word(hw); 531 532 if (hw->tx_count >= hw->len) { 533 /* mask tx fifo request interrupt as we are done */ 534 mask |= PSC_SPIMSK_TR; 535 } 536 537 stat = hw->regs->psc_spistat; 538 wmb(); /* drain writebuffer */ 539 if (stat & PSC_SPISTAT_TF) 540 break; 541 } 542 543 /* enable event interrupts */ 544 hw->regs->psc_spimsk = mask; 545 wmb(); /* drain writebuffer */ 546 547 /* start the transfer */ 548 hw->regs->psc_spipcr = PSC_SPIPCR_MS; 549 wmb(); /* drain writebuffer */ 550 551 wait_for_completion(&hw->master_done); 552 553 return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count; 554} 555 556static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw) 557{ 558 int busy; 559 u32 stat, evnt; 560 561 stat = hw->regs->psc_spistat; 562 evnt = hw->regs->psc_spievent; 563 wmb(); /* drain writebuffer */ 564 if ((stat & PSC_SPISTAT_DI) == 0) { 565 dev_err(hw->dev, "Unexpected IRQ!\n"); 566 return IRQ_NONE; 567 } 568 569 if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO 570 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO 571 | PSC_SPIEVNT_SD)) 572 != 0) { 573 /* 574 * due to an error we consider transfer as done, 575 * so mask all events until before next transfer start 576 */ 577 au1550_spi_mask_ack_all(hw); 578 au1550_spi_reset_fifos(hw); 579 dev_err(hw->dev, 580 "pio transfer: unexpected SPI error " 581 "(event=0x%x stat=0x%x)!\n", evnt, stat); 582 complete(&hw->master_done); 583 return IRQ_HANDLED; 584 } 585 586 /* 587 * while there is something to read from rx fifo 588 * or there is a space to write to tx fifo: 589 */ 590 do { 591 busy = 0; 592 stat = hw->regs->psc_spistat; 593 wmb(); /* drain writebuffer */ 594 595 /* 596 * Take care to not let the Rx FIFO overflow. 597 * 598 * We only write a byte if we have read one at least. Initially, 599 * the write fifo is full, so we should read from the read fifo 600 * first. 601 * In case we miss a word from the read fifo, we should get a 602 * RO event and should back out. 603 */ 604 if (!(stat & PSC_SPISTAT_RE) && hw->rx_count < hw->len) { 605 hw->rx_word(hw); 606 busy = 1; 607 608 if (!(stat & PSC_SPISTAT_TF) && hw->tx_count < hw->len) 609 hw->tx_word(hw); 610 } 611 } while (busy); 612 613 hw->regs->psc_spievent = PSC_SPIEVNT_RR | PSC_SPIEVNT_TR; 614 wmb(); /* drain writebuffer */ 615 616 /* 617 * Restart the SPI transmission in case of a transmit underflow. 618 * This seems to work despite the notes in the Au1550 data book 619 * of Figure 8-4 with flowchart for SPI master operation: 620 * 621 * """Note 1: An XFR Error Interrupt occurs, unless masked, 622 * for any of the following events: Tx FIFO Underflow, 623 * Rx FIFO Overflow, or Multiple-master Error 624 * Note 2: In case of a Tx Underflow Error, all zeroes are 625 * transmitted.""" 626 * 627 * By simply restarting the spi transfer on Tx Underflow Error, 628 * we assume that spi transfer was paused instead of zeroes 629 * transmittion mentioned in the Note 2 of Au1550 data book. 630 */ 631 if (evnt & PSC_SPIEVNT_TU) { 632 hw->regs->psc_spievent = PSC_SPIEVNT_TU | PSC_SPIEVNT_MD; 633 wmb(); /* drain writebuffer */ 634 hw->regs->psc_spipcr = PSC_SPIPCR_MS; 635 wmb(); /* drain writebuffer */ 636 } 637 638 if (hw->rx_count >= hw->len) { 639 /* transfer completed successfully */ 640 au1550_spi_mask_ack_all(hw); 641 complete(&hw->master_done); 642 } 643 return IRQ_HANDLED; 644} 645 646static int au1550_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) 647{ 648 struct au1550_spi *hw = spi_master_get_devdata(spi->master); 649 return hw->txrx_bufs(spi, t); 650} 651 652static irqreturn_t au1550_spi_irq(int irq, void *dev) 653{ 654 struct au1550_spi *hw = dev; 655 return hw->irq_callback(hw); 656} 657 658static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw) 659{ 660 if (bpw <= 8) { 661 if (hw->usedma) { 662 hw->txrx_bufs = &au1550_spi_dma_txrxb; 663 hw->irq_callback = &au1550_spi_dma_irq_callback; 664 } else { 665 hw->rx_word = &au1550_spi_rx_word_8; 666 hw->tx_word = &au1550_spi_tx_word_8; 667 hw->txrx_bufs = &au1550_spi_pio_txrxb; 668 hw->irq_callback = &au1550_spi_pio_irq_callback; 669 } 670 } else if (bpw <= 16) { 671 hw->rx_word = &au1550_spi_rx_word_16; 672 hw->tx_word = &au1550_spi_tx_word_16; 673 hw->txrx_bufs = &au1550_spi_pio_txrxb; 674 hw->irq_callback = &au1550_spi_pio_irq_callback; 675 } else { 676 hw->rx_word = &au1550_spi_rx_word_32; 677 hw->tx_word = &au1550_spi_tx_word_32; 678 hw->txrx_bufs = &au1550_spi_pio_txrxb; 679 hw->irq_callback = &au1550_spi_pio_irq_callback; 680 } 681} 682 683static void au1550_spi_setup_psc_as_spi(struct au1550_spi *hw) 684{ 685 u32 stat, cfg; 686 687 /* set up the PSC for SPI mode */ 688 hw->regs->psc_ctrl = PSC_CTRL_DISABLE; 689 wmb(); /* drain writebuffer */ 690 hw->regs->psc_sel = PSC_SEL_PS_SPIMODE; 691 wmb(); /* drain writebuffer */ 692 693 hw->regs->psc_spicfg = 0; 694 wmb(); /* drain writebuffer */ 695 696 hw->regs->psc_ctrl = PSC_CTRL_ENABLE; 697 wmb(); /* drain writebuffer */ 698 699 do { 700 stat = hw->regs->psc_spistat; 701 wmb(); /* drain writebuffer */ 702 } while ((stat & PSC_SPISTAT_SR) == 0); 703 704 705 cfg = hw->usedma ? 0 : PSC_SPICFG_DD_DISABLE; 706 cfg |= PSC_SPICFG_SET_LEN(8); 707 cfg |= PSC_SPICFG_RT_FIFO8 | PSC_SPICFG_TT_FIFO8; 708 /* use minimal allowed brg and div values as initial setting: */ 709 cfg |= PSC_SPICFG_SET_BAUD(4) | PSC_SPICFG_SET_DIV(0); 710 711#ifdef AU1550_SPI_DEBUG_LOOPBACK 712 cfg |= PSC_SPICFG_LB; 713#endif 714 715 hw->regs->psc_spicfg = cfg; 716 wmb(); /* drain writebuffer */ 717 718 au1550_spi_mask_ack_all(hw); 719 720 hw->regs->psc_spicfg |= PSC_SPICFG_DE_ENABLE; 721 wmb(); /* drain writebuffer */ 722 723 do { 724 stat = hw->regs->psc_spistat; 725 wmb(); /* drain writebuffer */ 726 } while ((stat & PSC_SPISTAT_DR) == 0); 727 728 au1550_spi_reset_fifos(hw); 729} 730 731 732static int au1550_spi_probe(struct platform_device *pdev) 733{ 734 struct au1550_spi *hw; 735 struct spi_master *master; 736 struct resource *r; 737 int err = 0; 738 739 master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi)); 740 if (master == NULL) { 741 dev_err(&pdev->dev, "No memory for spi_master\n"); 742 err = -ENOMEM; 743 goto err_nomem; 744 } 745 746 /* the spi->mode bits understood by this driver: */ 747 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; 748 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 24); 749 750 hw = spi_master_get_devdata(master); 751 752 hw->master = master; 753 hw->pdata = dev_get_platdata(&pdev->dev); 754 hw->dev = &pdev->dev; 755 756 if (hw->pdata == NULL) { 757 dev_err(&pdev->dev, "No platform data supplied\n"); 758 err = -ENOENT; 759 goto err_no_pdata; 760 } 761 762 r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 763 if (!r) { 764 dev_err(&pdev->dev, "no IRQ\n"); 765 err = -ENODEV; 766 goto err_no_iores; 767 } 768 hw->irq = r->start; 769 770 hw->usedma = 0; 771 r = platform_get_resource(pdev, IORESOURCE_DMA, 0); 772 if (r) { 773 hw->dma_tx_id = r->start; 774 r = platform_get_resource(pdev, IORESOURCE_DMA, 1); 775 if (r) { 776 hw->dma_rx_id = r->start; 777 if (usedma && ddma_memid) { 778 if (pdev->dev.dma_mask == NULL) 779 dev_warn(&pdev->dev, "no dma mask\n"); 780 else 781 hw->usedma = 1; 782 } 783 } 784 } 785 786 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 787 if (!r) { 788 dev_err(&pdev->dev, "no mmio resource\n"); 789 err = -ENODEV; 790 goto err_no_iores; 791 } 792 793 hw->ioarea = request_mem_region(r->start, sizeof(psc_spi_t), 794 pdev->name); 795 if (!hw->ioarea) { 796 dev_err(&pdev->dev, "Cannot reserve iomem region\n"); 797 err = -ENXIO; 798 goto err_no_iores; 799 } 800 801 hw->regs = (psc_spi_t __iomem *)ioremap(r->start, sizeof(psc_spi_t)); 802 if (!hw->regs) { 803 dev_err(&pdev->dev, "cannot ioremap\n"); 804 err = -ENXIO; 805 goto err_ioremap; 806 } 807 808 platform_set_drvdata(pdev, hw); 809 810 init_completion(&hw->master_done); 811 812 hw->bitbang.master = hw->master; 813 hw->bitbang.setup_transfer = au1550_spi_setupxfer; 814 hw->bitbang.chipselect = au1550_spi_chipsel; 815 hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs; 816 817 if (hw->usedma) { 818 hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid, 819 hw->dma_tx_id, NULL, (void *)hw); 820 if (hw->dma_tx_ch == 0) { 821 dev_err(&pdev->dev, 822 "Cannot allocate tx dma channel\n"); 823 err = -ENXIO; 824 goto err_no_txdma; 825 } 826 au1xxx_dbdma_set_devwidth(hw->dma_tx_ch, 8); 827 if (au1xxx_dbdma_ring_alloc(hw->dma_tx_ch, 828 AU1550_SPI_DBDMA_DESCRIPTORS) == 0) { 829 dev_err(&pdev->dev, 830 "Cannot allocate tx dma descriptors\n"); 831 err = -ENXIO; 832 goto err_no_txdma_descr; 833 } 834 835 836 hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id, 837 ddma_memid, NULL, (void *)hw); 838 if (hw->dma_rx_ch == 0) { 839 dev_err(&pdev->dev, 840 "Cannot allocate rx dma channel\n"); 841 err = -ENXIO; 842 goto err_no_rxdma; 843 } 844 au1xxx_dbdma_set_devwidth(hw->dma_rx_ch, 8); 845 if (au1xxx_dbdma_ring_alloc(hw->dma_rx_ch, 846 AU1550_SPI_DBDMA_DESCRIPTORS) == 0) { 847 dev_err(&pdev->dev, 848 "Cannot allocate rx dma descriptors\n"); 849 err = -ENXIO; 850 goto err_no_rxdma_descr; 851 } 852 853 err = au1550_spi_dma_rxtmp_alloc(hw, 854 AU1550_SPI_DMA_RXTMP_MINSIZE); 855 if (err < 0) { 856 dev_err(&pdev->dev, 857 "Cannot allocate initial rx dma tmp buffer\n"); 858 goto err_dma_rxtmp_alloc; 859 } 860 } 861 862 au1550_spi_bits_handlers_set(hw, 8); 863 864 err = request_irq(hw->irq, au1550_spi_irq, 0, pdev->name, hw); 865 if (err) { 866 dev_err(&pdev->dev, "Cannot claim IRQ\n"); 867 goto err_no_irq; 868 } 869 870 master->bus_num = pdev->id; 871 master->num_chipselect = hw->pdata->num_chipselect; 872 873 /* 874 * precompute valid range for spi freq - from au1550 datasheet: 875 * psc_tempclk = psc_mainclk / (2 << DIV) 876 * spiclk = psc_tempclk / (2 * (BRG + 1)) 877 * BRG valid range is 4..63 878 * DIV valid range is 0..3 879 * round the min and max frequencies to values that would still 880 * produce valid brg and div 881 */ 882 { 883 int min_div = (2 << 0) * (2 * (4 + 1)); 884 int max_div = (2 << 3) * (2 * (63 + 1)); 885 master->max_speed_hz = hw->pdata->mainclk_hz / min_div; 886 master->min_speed_hz = 887 hw->pdata->mainclk_hz / (max_div + 1) + 1; 888 } 889 890 au1550_spi_setup_psc_as_spi(hw); 891 892 err = spi_bitbang_start(&hw->bitbang); 893 if (err) { 894 dev_err(&pdev->dev, "Failed to register SPI master\n"); 895 goto err_register; 896 } 897 898 dev_info(&pdev->dev, 899 "spi master registered: bus_num=%d num_chipselect=%d\n", 900 master->bus_num, master->num_chipselect); 901 902 return 0; 903 904err_register: 905 free_irq(hw->irq, hw); 906 907err_no_irq: 908 au1550_spi_dma_rxtmp_free(hw); 909 910err_dma_rxtmp_alloc: 911err_no_rxdma_descr: 912 if (hw->usedma) 913 au1xxx_dbdma_chan_free(hw->dma_rx_ch); 914 915err_no_rxdma: 916err_no_txdma_descr: 917 if (hw->usedma) 918 au1xxx_dbdma_chan_free(hw->dma_tx_ch); 919 920err_no_txdma: 921 iounmap((void __iomem *)hw->regs); 922 923err_ioremap: 924 release_mem_region(r->start, sizeof(psc_spi_t)); 925 926err_no_iores: 927err_no_pdata: 928 spi_master_put(hw->master); 929 930err_nomem: 931 return err; 932} 933 934static int au1550_spi_remove(struct platform_device *pdev) 935{ 936 struct au1550_spi *hw = platform_get_drvdata(pdev); 937 938 dev_info(&pdev->dev, "spi master remove: bus_num=%d\n", 939 hw->master->bus_num); 940 941 spi_bitbang_stop(&hw->bitbang); 942 free_irq(hw->irq, hw); 943 iounmap((void __iomem *)hw->regs); 944 release_mem_region(hw->ioarea->start, sizeof(psc_spi_t)); 945 946 if (hw->usedma) { 947 au1550_spi_dma_rxtmp_free(hw); 948 au1xxx_dbdma_chan_free(hw->dma_rx_ch); 949 au1xxx_dbdma_chan_free(hw->dma_tx_ch); 950 } 951 952 spi_master_put(hw->master); 953 return 0; 954} 955 956/* work with hotplug and coldplug */ 957MODULE_ALIAS("platform:au1550-spi"); 958 959static struct platform_driver au1550_spi_drv = { 960 .probe = au1550_spi_probe, 961 .remove = au1550_spi_remove, 962 .driver = { 963 .name = "au1550-spi", 964 }, 965}; 966 967static int __init au1550_spi_init(void) 968{ 969 /* 970 * create memory device with 8 bits dev_devwidth 971 * needed for proper byte ordering to spi fifo 972 */ 973 switch (alchemy_get_cputype()) { 974 case ALCHEMY_CPU_AU1550: 975 case ALCHEMY_CPU_AU1200: 976 case ALCHEMY_CPU_AU1300: 977 break; 978 default: 979 return -ENODEV; 980 } 981 982 if (usedma) { 983 ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev); 984 if (!ddma_memid) 985 printk(KERN_ERR "au1550-spi: cannot add memory" 986 "dbdma device\n"); 987 } 988 return platform_driver_register(&au1550_spi_drv); 989} 990module_init(au1550_spi_init); 991 992static void __exit au1550_spi_exit(void) 993{ 994 if (usedma && ddma_memid) 995 au1xxx_ddma_del_device(ddma_memid); 996 platform_driver_unregister(&au1550_spi_drv); 997} 998module_exit(au1550_spi_exit); 999 1000MODULE_DESCRIPTION("Au1550 PSC SPI Driver"); 1001MODULE_AUTHOR("Jan Nikitenko <jan.nikitenko@gmail.com>"); 1002MODULE_LICENSE("GPL"); 1003