1
2/*  Driver for the Iomega MatchMaker parallel port SCSI HBA embedded in
3 * the Iomega ZIP Plus drive
4 *
5 * (c) 1998     David Campbell
6 *
7 * Please note that I live in Perth, Western Australia. GMT+0800
8 */
9
10#ifndef _IMM_H
11#define _IMM_H
12
13#define   IMM_VERSION   "2.05 (for Linux 2.4.0)"
14
15/*
16 * 10 Apr 1998 (Good Friday) - Received EN144302 by email from Iomega.
17 * Scarry thing is the level of support from one of their managers.
18 * The onus is now on us (the developers) to shut up and start coding.
19 *                                              11Apr98 [ 0.10 ]
20 *
21 * --- SNIP ---
22 *
23 * It manages to find the drive which is a good start. Writing data during
24 * data phase is known to be broken (due to requirements of two byte writes).
25 * Removing "Phase" debug messages.
26 *
27 * PS: Took four hours of coding after I bought a drive.
28 *      ANZAC Day (Aus "War Veterans Holiday")  25Apr98 [ 0.14 ]
29 *
30 * Ten minutes later after a few fixes.... (LITERALLY!!!)
31 * Have mounted disk, copied file, dismounted disk, remount disk, diff file
32 *                    -----  It actually works!!! -----
33 *                                              25Apr98 [ 0.15 ]
34 *
35 * Twenty minutes of mucking around, rearanged the IEEE negotiate mechanism.
36 * Now have byte mode working (only EPP and ECP to go now... :=)
37 *                                              26Apr98 [ 0.16 ]
38 *
39 * Thirty minutes of further coding results in EPP working on my machine.
40 *                                              27Apr98 [ 0.17 ]
41 *
42 * Due to work commitments and inability to get a "true" ECP mode functioning
43 * I have decided to code the parport support into imm.
44 *                                              09Jun98 [ 0.18 ]
45 *
46 * Driver is now out of beta testing.
47 * Support for parport has been added.
48 * Now distributed with the ppa driver.
49 *                                              12Jun98 [ 2.00 ]
50 *
51 * Err.. It appears that imm-2.00 was broken....
52 *                                              18Jun98 [ 2.01 ]
53 *
54 * Patch applied to sync this against the Linux 2.1.x kernel code
55 * Included qboot_zip.sh
56 *                                              21Jun98 [ 2.02 ]
57 *
58 * Other clean ups include the follow changes:
59 *    CONFIG_SCSI_PPA_HAVE_PEDANTIC => CONFIG_SCSI_IZIP_EPP16
60 *    added CONFIG_SCSI_IZIP_SLOW_CTR option
61 *                                                      [2.03]
62 *  Fix kernel panic on scsi timeout.		20Aug00 [2.04]
63 *
64 *  Avoid io_request_lock problems.
65 *  John Cavan <johncavan@home.com>		16Nov00 [2.05]
66 */
67/* ------ END OF USER CONFIGURABLE PARAMETERS ----- */
68
69#include  <linux/stddef.h>
70#include  <linux/module.h>
71#include  <linux/kernel.h>
72#include  <linux/ioport.h>
73#include  <linux/delay.h>
74#include  <linux/proc_fs.h>
75#include  <linux/stat.h>
76#include  <linux/blkdev.h>
77#include  <linux/sched.h>
78#include  <linux/interrupt.h>
79
80#include  <asm/io.h>
81#include  <scsi/scsi_host.h>
82/* batteries not included :-) */
83
84/*
85 * modes in which the driver can operate
86 */
87#define   IMM_AUTODETECT        0	/* Autodetect mode                */
88#define   IMM_NIBBLE            1	/* work in standard 4 bit mode    */
89#define   IMM_PS2               2	/* PS/2 byte mode         */
90#define   IMM_EPP_8             3	/* EPP mode, 8 bit                */
91#define   IMM_EPP_16            4	/* EPP mode, 16 bit               */
92#define   IMM_EPP_32            5	/* EPP mode, 32 bit               */
93#define   IMM_UNKNOWN           6	/* Just in case...                */
94
95static char *IMM_MODE_STRING[] =
96{
97	[IMM_AUTODETECT] = "Autodetect",
98	[IMM_NIBBLE]	 = "SPP",
99	[IMM_PS2]	 = "PS/2",
100	[IMM_EPP_8]	 = "EPP 8 bit",
101	[IMM_EPP_16]	 = "EPP 16 bit",
102#ifdef CONFIG_SCSI_IZIP_EPP16
103	[IMM_EPP_32]	 = "EPP 16 bit",
104#else
105	[IMM_EPP_32]	 = "EPP 32 bit",
106#endif
107	[IMM_UNKNOWN]	 = "Unknown",
108};
109
110/* other options */
111#define IMM_BURST_SIZE	512	/* data burst size */
112#define IMM_SELECT_TMO  500	/* 500 how long to wait for target ? */
113#define IMM_SPIN_TMO    5000	/* 50000 imm_wait loop limiter */
114#define IMM_DEBUG	0	/* debugging option */
115#define IN_EPP_MODE(x) (x == IMM_EPP_8 || x == IMM_EPP_16 || x == IMM_EPP_32)
116
117/* args to imm_connect */
118#define CONNECT_EPP_MAYBE 1
119#define CONNECT_NORMAL  0
120
121#define r_dtr(x)        (unsigned char)inb((x))
122#define r_str(x)        (unsigned char)inb((x)+1)
123#define r_ctr(x)        (unsigned char)inb((x)+2)
124#define r_epp(x)        (unsigned char)inb((x)+4)
125#define r_fifo(x)       (unsigned char)inb((x))   /* x must be base_hi */
126					/* On PCI is: base+0x400 != base_hi */
127#define r_ecr(x)        (unsigned char)inb((x)+2) /* x must be base_hi */
128
129#define w_dtr(x,y)      outb(y, (x))
130#define w_str(x,y)      outb(y, (x)+1)
131#define w_epp(x,y)      outb(y, (x)+4)
132#define w_fifo(x,y)     outb(y, (x))     /* x must be base_hi */
133#define w_ecr(x,y)      outb(y, (x)+0x2) /* x must be base_hi */
134
135#ifdef CONFIG_SCSI_IZIP_SLOW_CTR
136#define w_ctr(x,y)      outb_p(y, (x)+2)
137#else
138#define w_ctr(x,y)      outb(y, (x)+2)
139#endif
140
141static int imm_engine(imm_struct *, struct scsi_cmnd *);
142
143#endif				/* _IMM_H */
144