1#define DRV_NAME "advansys" 2#define ASC_VERSION "3.4" /* AdvanSys Driver Version */ 3 4/* 5 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters 6 * 7 * Copyright (c) 1995-2000 Advanced System Products, Inc. 8 * Copyright (c) 2000-2001 ConnectCom Solutions, Inc. 9 * Copyright (c) 2007 Matthew Wilcox <matthew@wil.cx> 10 * All Rights Reserved. 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2 of the License, or 15 * (at your option) any later version. 16 */ 17 18/* 19 * As of March 8, 2000 Advanced System Products, Inc. (AdvanSys) 20 * changed its name to ConnectCom Solutions, Inc. 21 * On June 18, 2001 Initio Corp. acquired ConnectCom's SCSI assets 22 */ 23 24#include <linux/module.h> 25#include <linux/string.h> 26#include <linux/kernel.h> 27#include <linux/types.h> 28#include <linux/ioport.h> 29#include <linux/interrupt.h> 30#include <linux/delay.h> 31#include <linux/slab.h> 32#include <linux/mm.h> 33#include <linux/proc_fs.h> 34#include <linux/init.h> 35#include <linux/blkdev.h> 36#include <linux/isa.h> 37#include <linux/eisa.h> 38#include <linux/pci.h> 39#include <linux/spinlock.h> 40#include <linux/dma-mapping.h> 41#include <linux/firmware.h> 42 43#include <asm/io.h> 44#include <asm/dma.h> 45 46#include <scsi/scsi_cmnd.h> 47#include <scsi/scsi_device.h> 48#include <scsi/scsi_tcq.h> 49#include <scsi/scsi.h> 50#include <scsi/scsi_host.h> 51 52/* FIXME: 53 * 54 * 1. Although all of the necessary command mapping places have the 55 * appropriate dma_map.. APIs, the driver still processes its internal 56 * queue using bus_to_virt() and virt_to_bus() which are illegal under 57 * the API. The entire queue processing structure will need to be 58 * altered to fix this. 59 * 2. Need to add memory mapping workaround. Test the memory mapping. 60 * If it doesn't work revert to I/O port access. Can a test be done 61 * safely? 62 * 3. Handle an interrupt not working. Keep an interrupt counter in 63 * the interrupt handler. In the timeout function if the interrupt 64 * has not occurred then print a message and run in polled mode. 65 * 4. Need to add support for target mode commands, cf. CAM XPT. 66 * 5. check DMA mapping functions for failure 67 * 6. Use scsi_transport_spi 68 * 7. advansys_info is not safe against multiple simultaneous callers 69 * 8. Add module_param to override ISA/VLB ioport array 70 */ 71#warning this driver is still not properly converted to the DMA API 72 73/* Enable driver /proc statistics. */ 74#define ADVANSYS_STATS 75 76/* Enable driver tracing. */ 77#undef ADVANSYS_DEBUG 78 79/* 80 * Portable Data Types 81 * 82 * Any instance where a 32-bit long or pointer type is assumed 83 * for precision or HW defined structures, the following define 84 * types must be used. In Linux the char, short, and int types 85 * are all consistent at 8, 16, and 32 bits respectively. Pointers 86 * and long types are 64 bits on Alpha and UltraSPARC. 87 */ 88#define ASC_PADDR __u32 /* Physical/Bus address data type. */ 89#define ASC_VADDR __u32 /* Virtual address data type. */ 90#define ASC_DCNT __u32 /* Unsigned Data count type. */ 91#define ASC_SDCNT __s32 /* Signed Data count type. */ 92 93typedef unsigned char uchar; 94 95#ifndef TRUE 96#define TRUE (1) 97#endif 98#ifndef FALSE 99#define FALSE (0) 100#endif 101 102#define ERR (-1) 103#define UW_ERR (uint)(0xFFFF) 104#define isodd_word(val) ((((uint)val) & (uint)0x0001) != 0) 105 106#define PCI_VENDOR_ID_ASP 0x10cd 107#define PCI_DEVICE_ID_ASP_1200A 0x1100 108#define PCI_DEVICE_ID_ASP_ABP940 0x1200 109#define PCI_DEVICE_ID_ASP_ABP940U 0x1300 110#define PCI_DEVICE_ID_ASP_ABP940UW 0x2300 111#define PCI_DEVICE_ID_38C0800_REV1 0x2500 112#define PCI_DEVICE_ID_38C1600_REV1 0x2700 113 114/* 115 * Enable CC_VERY_LONG_SG_LIST to support up to 64K element SG lists. 116 * The SRB structure will have to be changed and the ASC_SRB2SCSIQ() 117 * macro re-defined to be able to obtain a ASC_SCSI_Q pointer from the 118 * SRB structure. 119 */ 120#define CC_VERY_LONG_SG_LIST 0 121#define ASC_SRB2SCSIQ(srb_ptr) (srb_ptr) 122 123#define PortAddr unsigned int /* port address size */ 124#define inp(port) inb(port) 125#define outp(port, byte) outb((byte), (port)) 126 127#define inpw(port) inw(port) 128#define outpw(port, word) outw((word), (port)) 129 130#define ASC_MAX_SG_QUEUE 7 131#define ASC_MAX_SG_LIST 255 132 133#define ASC_CS_TYPE unsigned short 134 135#define ASC_IS_ISA (0x0001) 136#define ASC_IS_ISAPNP (0x0081) 137#define ASC_IS_EISA (0x0002) 138#define ASC_IS_PCI (0x0004) 139#define ASC_IS_PCI_ULTRA (0x0104) 140#define ASC_IS_PCMCIA (0x0008) 141#define ASC_IS_MCA (0x0020) 142#define ASC_IS_VL (0x0040) 143#define ASC_IS_WIDESCSI_16 (0x0100) 144#define ASC_IS_WIDESCSI_32 (0x0200) 145#define ASC_IS_BIG_ENDIAN (0x8000) 146 147#define ASC_CHIP_MIN_VER_VL (0x01) 148#define ASC_CHIP_MAX_VER_VL (0x07) 149#define ASC_CHIP_MIN_VER_PCI (0x09) 150#define ASC_CHIP_MAX_VER_PCI (0x0F) 151#define ASC_CHIP_VER_PCI_BIT (0x08) 152#define ASC_CHIP_MIN_VER_ISA (0x11) 153#define ASC_CHIP_MIN_VER_ISA_PNP (0x21) 154#define ASC_CHIP_MAX_VER_ISA (0x27) 155#define ASC_CHIP_VER_ISA_BIT (0x30) 156#define ASC_CHIP_VER_ISAPNP_BIT (0x20) 157#define ASC_CHIP_VER_ASYN_BUG (0x21) 158#define ASC_CHIP_VER_PCI 0x08 159#define ASC_CHIP_VER_PCI_ULTRA_3150 (ASC_CHIP_VER_PCI | 0x02) 160#define ASC_CHIP_VER_PCI_ULTRA_3050 (ASC_CHIP_VER_PCI | 0x03) 161#define ASC_CHIP_MIN_VER_EISA (0x41) 162#define ASC_CHIP_MAX_VER_EISA (0x47) 163#define ASC_CHIP_VER_EISA_BIT (0x40) 164#define ASC_CHIP_LATEST_VER_EISA ((ASC_CHIP_MIN_VER_EISA - 1) + 3) 165#define ASC_MAX_VL_DMA_COUNT (0x07FFFFFFL) 166#define ASC_MAX_PCI_DMA_COUNT (0xFFFFFFFFL) 167#define ASC_MAX_ISA_DMA_COUNT (0x00FFFFFFL) 168 169#define ASC_SCSI_ID_BITS 3 170#define ASC_SCSI_TIX_TYPE uchar 171#define ASC_ALL_DEVICE_BIT_SET 0xFF 172#define ASC_SCSI_BIT_ID_TYPE uchar 173#define ASC_MAX_TID 7 174#define ASC_MAX_LUN 7 175#define ASC_SCSI_WIDTH_BIT_SET 0xFF 176#define ASC_MAX_SENSE_LEN 32 177#define ASC_MIN_SENSE_LEN 14 178#define ASC_SCSI_RESET_HOLD_TIME_US 60 179 180/* 181 * Narrow boards only support 12-byte commands, while wide boards 182 * extend to 16-byte commands. 183 */ 184#define ASC_MAX_CDB_LEN 12 185#define ADV_MAX_CDB_LEN 16 186 187#define MS_SDTR_LEN 0x03 188#define MS_WDTR_LEN 0x02 189 190#define ASC_SG_LIST_PER_Q 7 191#define QS_FREE 0x00 192#define QS_READY 0x01 193#define QS_DISC1 0x02 194#define QS_DISC2 0x04 195#define QS_BUSY 0x08 196#define QS_ABORTED 0x40 197#define QS_DONE 0x80 198#define QC_NO_CALLBACK 0x01 199#define QC_SG_SWAP_QUEUE 0x02 200#define QC_SG_HEAD 0x04 201#define QC_DATA_IN 0x08 202#define QC_DATA_OUT 0x10 203#define QC_URGENT 0x20 204#define QC_MSG_OUT 0x40 205#define QC_REQ_SENSE 0x80 206#define QCSG_SG_XFER_LIST 0x02 207#define QCSG_SG_XFER_MORE 0x04 208#define QCSG_SG_XFER_END 0x08 209#define QD_IN_PROGRESS 0x00 210#define QD_NO_ERROR 0x01 211#define QD_ABORTED_BY_HOST 0x02 212#define QD_WITH_ERROR 0x04 213#define QD_INVALID_REQUEST 0x80 214#define QD_INVALID_HOST_NUM 0x81 215#define QD_INVALID_DEVICE 0x82 216#define QD_ERR_INTERNAL 0xFF 217#define QHSTA_NO_ERROR 0x00 218#define QHSTA_M_SEL_TIMEOUT 0x11 219#define QHSTA_M_DATA_OVER_RUN 0x12 220#define QHSTA_M_DATA_UNDER_RUN 0x12 221#define QHSTA_M_UNEXPECTED_BUS_FREE 0x13 222#define QHSTA_M_BAD_BUS_PHASE_SEQ 0x14 223#define QHSTA_D_QDONE_SG_LIST_CORRUPTED 0x21 224#define QHSTA_D_ASC_DVC_ERROR_CODE_SET 0x22 225#define QHSTA_D_HOST_ABORT_FAILED 0x23 226#define QHSTA_D_EXE_SCSI_Q_FAILED 0x24 227#define QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT 0x25 228#define QHSTA_D_ASPI_NO_BUF_POOL 0x26 229#define QHSTA_M_WTM_TIMEOUT 0x41 230#define QHSTA_M_BAD_CMPL_STATUS_IN 0x42 231#define QHSTA_M_NO_AUTO_REQ_SENSE 0x43 232#define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44 233#define QHSTA_M_TARGET_STATUS_BUSY 0x45 234#define QHSTA_M_BAD_TAG_CODE 0x46 235#define QHSTA_M_BAD_QUEUE_FULL_OR_BUSY 0x47 236#define QHSTA_M_HUNG_REQ_SCSI_BUS_RESET 0x48 237#define QHSTA_D_LRAM_CMP_ERROR 0x81 238#define QHSTA_M_MICRO_CODE_ERROR_HALT 0xA1 239#define ASC_FLAG_SCSIQ_REQ 0x01 240#define ASC_FLAG_BIOS_SCSIQ_REQ 0x02 241#define ASC_FLAG_BIOS_ASYNC_IO 0x04 242#define ASC_FLAG_SRB_LINEAR_ADDR 0x08 243#define ASC_FLAG_WIN16 0x10 244#define ASC_FLAG_WIN32 0x20 245#define ASC_FLAG_ISA_OVER_16MB 0x40 246#define ASC_FLAG_DOS_VM_CALLBACK 0x80 247#define ASC_TAG_FLAG_EXTRA_BYTES 0x10 248#define ASC_TAG_FLAG_DISABLE_DISCONNECT 0x04 249#define ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX 0x08 250#define ASC_TAG_FLAG_DISABLE_CHK_COND_INT_HOST 0x40 251#define ASC_SCSIQ_CPY_BEG 4 252#define ASC_SCSIQ_SGHD_CPY_BEG 2 253#define ASC_SCSIQ_B_FWD 0 254#define ASC_SCSIQ_B_BWD 1 255#define ASC_SCSIQ_B_STATUS 2 256#define ASC_SCSIQ_B_QNO 3 257#define ASC_SCSIQ_B_CNTL 4 258#define ASC_SCSIQ_B_SG_QUEUE_CNT 5 259#define ASC_SCSIQ_D_DATA_ADDR 8 260#define ASC_SCSIQ_D_DATA_CNT 12 261#define ASC_SCSIQ_B_SENSE_LEN 20 262#define ASC_SCSIQ_DONE_INFO_BEG 22 263#define ASC_SCSIQ_D_SRBPTR 22 264#define ASC_SCSIQ_B_TARGET_IX 26 265#define ASC_SCSIQ_B_CDB_LEN 28 266#define ASC_SCSIQ_B_TAG_CODE 29 267#define ASC_SCSIQ_W_VM_ID 30 268#define ASC_SCSIQ_DONE_STATUS 32 269#define ASC_SCSIQ_HOST_STATUS 33 270#define ASC_SCSIQ_SCSI_STATUS 34 271#define ASC_SCSIQ_CDB_BEG 36 272#define ASC_SCSIQ_DW_REMAIN_XFER_ADDR 56 273#define ASC_SCSIQ_DW_REMAIN_XFER_CNT 60 274#define ASC_SCSIQ_B_FIRST_SG_WK_QP 48 275#define ASC_SCSIQ_B_SG_WK_QP 49 276#define ASC_SCSIQ_B_SG_WK_IX 50 277#define ASC_SCSIQ_W_ALT_DC1 52 278#define ASC_SCSIQ_B_LIST_CNT 6 279#define ASC_SCSIQ_B_CUR_LIST_CNT 7 280#define ASC_SGQ_B_SG_CNTL 4 281#define ASC_SGQ_B_SG_HEAD_QP 5 282#define ASC_SGQ_B_SG_LIST_CNT 6 283#define ASC_SGQ_B_SG_CUR_LIST_CNT 7 284#define ASC_SGQ_LIST_BEG 8 285#define ASC_DEF_SCSI1_QNG 4 286#define ASC_MAX_SCSI1_QNG 4 287#define ASC_DEF_SCSI2_QNG 16 288#define ASC_MAX_SCSI2_QNG 32 289#define ASC_TAG_CODE_MASK 0x23 290#define ASC_STOP_REQ_RISC_STOP 0x01 291#define ASC_STOP_ACK_RISC_STOP 0x03 292#define ASC_STOP_CLEAN_UP_BUSY_Q 0x10 293#define ASC_STOP_CLEAN_UP_DISC_Q 0x20 294#define ASC_STOP_HOST_REQ_RISC_HALT 0x40 295#define ASC_TIDLUN_TO_IX(tid, lun) (ASC_SCSI_TIX_TYPE)((tid) + ((lun)<<ASC_SCSI_ID_BITS)) 296#define ASC_TID_TO_TARGET_ID(tid) (ASC_SCSI_BIT_ID_TYPE)(0x01 << (tid)) 297#define ASC_TIX_TO_TARGET_ID(tix) (0x01 << ((tix) & ASC_MAX_TID)) 298#define ASC_TIX_TO_TID(tix) ((tix) & ASC_MAX_TID) 299#define ASC_TID_TO_TIX(tid) ((tid) & ASC_MAX_TID) 300#define ASC_TIX_TO_LUN(tix) (((tix) >> ASC_SCSI_ID_BITS) & ASC_MAX_LUN) 301#define ASC_QNO_TO_QADDR(q_no) ((ASC_QADR_BEG)+((int)(q_no) << 6)) 302 303typedef struct asc_scsiq_1 { 304 uchar status; 305 uchar q_no; 306 uchar cntl; 307 uchar sg_queue_cnt; 308 uchar target_id; 309 uchar target_lun; 310 ASC_PADDR data_addr; 311 ASC_DCNT data_cnt; 312 ASC_PADDR sense_addr; 313 uchar sense_len; 314 uchar extra_bytes; 315} ASC_SCSIQ_1; 316 317typedef struct asc_scsiq_2 { 318 ASC_VADDR srb_ptr; 319 uchar target_ix; 320 uchar flag; 321 uchar cdb_len; 322 uchar tag_code; 323 ushort vm_id; 324} ASC_SCSIQ_2; 325 326typedef struct asc_scsiq_3 { 327 uchar done_stat; 328 uchar host_stat; 329 uchar scsi_stat; 330 uchar scsi_msg; 331} ASC_SCSIQ_3; 332 333typedef struct asc_scsiq_4 { 334 uchar cdb[ASC_MAX_CDB_LEN]; 335 uchar y_first_sg_list_qp; 336 uchar y_working_sg_qp; 337 uchar y_working_sg_ix; 338 uchar y_res; 339 ushort x_req_count; 340 ushort x_reconnect_rtn; 341 ASC_PADDR x_saved_data_addr; 342 ASC_DCNT x_saved_data_cnt; 343} ASC_SCSIQ_4; 344 345typedef struct asc_q_done_info { 346 ASC_SCSIQ_2 d2; 347 ASC_SCSIQ_3 d3; 348 uchar q_status; 349 uchar q_no; 350 uchar cntl; 351 uchar sense_len; 352 uchar extra_bytes; 353 uchar res; 354 ASC_DCNT remain_bytes; 355} ASC_QDONE_INFO; 356 357typedef struct asc_sg_list { 358 ASC_PADDR addr; 359 ASC_DCNT bytes; 360} ASC_SG_LIST; 361 362typedef struct asc_sg_head { 363 ushort entry_cnt; 364 ushort queue_cnt; 365 ushort entry_to_copy; 366 ushort res; 367 ASC_SG_LIST sg_list[0]; 368} ASC_SG_HEAD; 369 370typedef struct asc_scsi_q { 371 ASC_SCSIQ_1 q1; 372 ASC_SCSIQ_2 q2; 373 uchar *cdbptr; 374 ASC_SG_HEAD *sg_head; 375 ushort remain_sg_entry_cnt; 376 ushort next_sg_index; 377} ASC_SCSI_Q; 378 379typedef struct asc_scsi_req_q { 380 ASC_SCSIQ_1 r1; 381 ASC_SCSIQ_2 r2; 382 uchar *cdbptr; 383 ASC_SG_HEAD *sg_head; 384 uchar *sense_ptr; 385 ASC_SCSIQ_3 r3; 386 uchar cdb[ASC_MAX_CDB_LEN]; 387 uchar sense[ASC_MIN_SENSE_LEN]; 388} ASC_SCSI_REQ_Q; 389 390typedef struct asc_scsi_bios_req_q { 391 ASC_SCSIQ_1 r1; 392 ASC_SCSIQ_2 r2; 393 uchar *cdbptr; 394 ASC_SG_HEAD *sg_head; 395 uchar *sense_ptr; 396 ASC_SCSIQ_3 r3; 397 uchar cdb[ASC_MAX_CDB_LEN]; 398 uchar sense[ASC_MIN_SENSE_LEN]; 399} ASC_SCSI_BIOS_REQ_Q; 400 401typedef struct asc_risc_q { 402 uchar fwd; 403 uchar bwd; 404 ASC_SCSIQ_1 i1; 405 ASC_SCSIQ_2 i2; 406 ASC_SCSIQ_3 i3; 407 ASC_SCSIQ_4 i4; 408} ASC_RISC_Q; 409 410typedef struct asc_sg_list_q { 411 uchar seq_no; 412 uchar q_no; 413 uchar cntl; 414 uchar sg_head_qp; 415 uchar sg_list_cnt; 416 uchar sg_cur_list_cnt; 417} ASC_SG_LIST_Q; 418 419typedef struct asc_risc_sg_list_q { 420 uchar fwd; 421 uchar bwd; 422 ASC_SG_LIST_Q sg; 423 ASC_SG_LIST sg_list[7]; 424} ASC_RISC_SG_LIST_Q; 425 426#define ASCQ_ERR_Q_STATUS 0x0D 427#define ASCQ_ERR_CUR_QNG 0x17 428#define ASCQ_ERR_SG_Q_LINKS 0x18 429#define ASCQ_ERR_ISR_RE_ENTRY 0x1A 430#define ASCQ_ERR_CRITICAL_RE_ENTRY 0x1B 431#define ASCQ_ERR_ISR_ON_CRITICAL 0x1C 432 433/* 434 * Warning code values are set in ASC_DVC_VAR 'warn_code'. 435 */ 436#define ASC_WARN_NO_ERROR 0x0000 437#define ASC_WARN_IO_PORT_ROTATE 0x0001 438#define ASC_WARN_EEPROM_CHKSUM 0x0002 439#define ASC_WARN_IRQ_MODIFIED 0x0004 440#define ASC_WARN_AUTO_CONFIG 0x0008 441#define ASC_WARN_CMD_QNG_CONFLICT 0x0010 442#define ASC_WARN_EEPROM_RECOVER 0x0020 443#define ASC_WARN_CFG_MSW_RECOVER 0x0040 444 445/* 446 * Error code values are set in {ASC/ADV}_DVC_VAR 'err_code'. 447 */ 448#define ASC_IERR_NO_CARRIER 0x0001 /* No more carrier memory */ 449#define ASC_IERR_MCODE_CHKSUM 0x0002 /* micro code check sum error */ 450#define ASC_IERR_SET_PC_ADDR 0x0004 451#define ASC_IERR_START_STOP_CHIP 0x0008 /* start/stop chip failed */ 452#define ASC_IERR_ILLEGAL_CONNECTION 0x0010 /* Illegal cable connection */ 453#define ASC_IERR_SINGLE_END_DEVICE 0x0020 /* SE device on DIFF bus */ 454#define ASC_IERR_REVERSED_CABLE 0x0040 /* Narrow flat cable reversed */ 455#define ASC_IERR_SET_SCSI_ID 0x0080 /* set SCSI ID failed */ 456#define ASC_IERR_HVD_DEVICE 0x0100 /* HVD device on LVD port */ 457#define ASC_IERR_BAD_SIGNATURE 0x0200 /* signature not found */ 458#define ASC_IERR_NO_BUS_TYPE 0x0400 459#define ASC_IERR_BIST_PRE_TEST 0x0800 /* BIST pre-test error */ 460#define ASC_IERR_BIST_RAM_TEST 0x1000 /* BIST RAM test error */ 461#define ASC_IERR_BAD_CHIPTYPE 0x2000 /* Invalid chip_type setting */ 462 463#define ASC_DEF_MAX_TOTAL_QNG (0xF0) 464#define ASC_MIN_TAG_Q_PER_DVC (0x04) 465#define ASC_MIN_FREE_Q (0x02) 466#define ASC_MIN_TOTAL_QNG ((ASC_MAX_SG_QUEUE)+(ASC_MIN_FREE_Q)) 467#define ASC_MAX_TOTAL_QNG 240 468#define ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG 16 469#define ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG 8 470#define ASC_MAX_PCI_INRAM_TOTAL_QNG 20 471#define ASC_MAX_INRAM_TAG_QNG 16 472#define ASC_IOADR_GAP 0x10 473#define ASC_SYN_MAX_OFFSET 0x0F 474#define ASC_DEF_SDTR_OFFSET 0x0F 475#define ASC_SDTR_ULTRA_PCI_10MB_INDEX 0x02 476#define ASYN_SDTR_DATA_FIX_PCI_REV_AB 0x41 477 478/* The narrow chip only supports a limited selection of transfer rates. 479 * These are encoded in the range 0..7 or 0..15 depending whether the chip 480 * is Ultra-capable or not. These tables let us convert from one to the other. 481 */ 482static const unsigned char asc_syn_xfer_period[8] = { 483 25, 30, 35, 40, 50, 60, 70, 85 484}; 485 486static const unsigned char asc_syn_ultra_xfer_period[16] = { 487 12, 19, 25, 32, 38, 44, 50, 57, 63, 69, 75, 82, 88, 94, 100, 107 488}; 489 490typedef struct ext_msg { 491 uchar msg_type; 492 uchar msg_len; 493 uchar msg_req; 494 union { 495 struct { 496 uchar sdtr_xfer_period; 497 uchar sdtr_req_ack_offset; 498 } sdtr; 499 struct { 500 uchar wdtr_width; 501 } wdtr; 502 struct { 503 uchar mdp_b3; 504 uchar mdp_b2; 505 uchar mdp_b1; 506 uchar mdp_b0; 507 } mdp; 508 } u_ext_msg; 509 uchar res; 510} EXT_MSG; 511 512#define xfer_period u_ext_msg.sdtr.sdtr_xfer_period 513#define req_ack_offset u_ext_msg.sdtr.sdtr_req_ack_offset 514#define wdtr_width u_ext_msg.wdtr.wdtr_width 515#define mdp_b3 u_ext_msg.mdp_b3 516#define mdp_b2 u_ext_msg.mdp_b2 517#define mdp_b1 u_ext_msg.mdp_b1 518#define mdp_b0 u_ext_msg.mdp_b0 519 520typedef struct asc_dvc_cfg { 521 ASC_SCSI_BIT_ID_TYPE can_tagged_qng; 522 ASC_SCSI_BIT_ID_TYPE cmd_qng_enabled; 523 ASC_SCSI_BIT_ID_TYPE disc_enable; 524 ASC_SCSI_BIT_ID_TYPE sdtr_enable; 525 uchar chip_scsi_id; 526 uchar isa_dma_speed; 527 uchar isa_dma_channel; 528 uchar chip_version; 529 ushort mcode_date; 530 ushort mcode_version; 531 uchar max_tag_qng[ASC_MAX_TID + 1]; 532 uchar sdtr_period_offset[ASC_MAX_TID + 1]; 533 uchar adapter_info[6]; 534} ASC_DVC_CFG; 535 536#define ASC_DEF_DVC_CNTL 0xFFFF 537#define ASC_DEF_CHIP_SCSI_ID 7 538#define ASC_DEF_ISA_DMA_SPEED 4 539#define ASC_INIT_STATE_BEG_GET_CFG 0x0001 540#define ASC_INIT_STATE_END_GET_CFG 0x0002 541#define ASC_INIT_STATE_BEG_SET_CFG 0x0004 542#define ASC_INIT_STATE_END_SET_CFG 0x0008 543#define ASC_INIT_STATE_BEG_LOAD_MC 0x0010 544#define ASC_INIT_STATE_END_LOAD_MC 0x0020 545#define ASC_INIT_STATE_BEG_INQUIRY 0x0040 546#define ASC_INIT_STATE_END_INQUIRY 0x0080 547#define ASC_INIT_RESET_SCSI_DONE 0x0100 548#define ASC_INIT_STATE_WITHOUT_EEP 0x8000 549#define ASC_BUG_FIX_IF_NOT_DWB 0x0001 550#define ASC_BUG_FIX_ASYN_USE_SYN 0x0002 551#define ASC_MIN_TAGGED_CMD 7 552#define ASC_MAX_SCSI_RESET_WAIT 30 553#define ASC_OVERRUN_BSIZE 64 554 555struct asc_dvc_var; /* Forward Declaration. */ 556 557typedef struct asc_dvc_var { 558 PortAddr iop_base; 559 ushort err_code; 560 ushort dvc_cntl; 561 ushort bug_fix_cntl; 562 ushort bus_type; 563 ASC_SCSI_BIT_ID_TYPE init_sdtr; 564 ASC_SCSI_BIT_ID_TYPE sdtr_done; 565 ASC_SCSI_BIT_ID_TYPE use_tagged_qng; 566 ASC_SCSI_BIT_ID_TYPE unit_not_ready; 567 ASC_SCSI_BIT_ID_TYPE queue_full_or_busy; 568 ASC_SCSI_BIT_ID_TYPE start_motor; 569 uchar *overrun_buf; 570 dma_addr_t overrun_dma; 571 uchar scsi_reset_wait; 572 uchar chip_no; 573 char is_in_int; 574 uchar max_total_qng; 575 uchar cur_total_qng; 576 uchar in_critical_cnt; 577 uchar last_q_shortage; 578 ushort init_state; 579 uchar cur_dvc_qng[ASC_MAX_TID + 1]; 580 uchar max_dvc_qng[ASC_MAX_TID + 1]; 581 ASC_SCSI_Q *scsiq_busy_head[ASC_MAX_TID + 1]; 582 ASC_SCSI_Q *scsiq_busy_tail[ASC_MAX_TID + 1]; 583 const uchar *sdtr_period_tbl; 584 ASC_DVC_CFG *cfg; 585 ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer_always; 586 char redo_scam; 587 ushort res2; 588 uchar dos_int13_table[ASC_MAX_TID + 1]; 589 ASC_DCNT max_dma_count; 590 ASC_SCSI_BIT_ID_TYPE no_scam; 591 ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer; 592 uchar min_sdtr_index; 593 uchar max_sdtr_index; 594 struct asc_board *drv_ptr; 595 int ptr_map_count; 596 void **ptr_map; 597 ASC_DCNT uc_break; 598} ASC_DVC_VAR; 599 600typedef struct asc_dvc_inq_info { 601 uchar type[ASC_MAX_TID + 1][ASC_MAX_LUN + 1]; 602} ASC_DVC_INQ_INFO; 603 604typedef struct asc_cap_info { 605 ASC_DCNT lba; 606 ASC_DCNT blk_size; 607} ASC_CAP_INFO; 608 609typedef struct asc_cap_info_array { 610 ASC_CAP_INFO cap_info[ASC_MAX_TID + 1][ASC_MAX_LUN + 1]; 611} ASC_CAP_INFO_ARRAY; 612 613#define ASC_MCNTL_NO_SEL_TIMEOUT (ushort)0x0001 614#define ASC_MCNTL_NULL_TARGET (ushort)0x0002 615#define ASC_CNTL_INITIATOR (ushort)0x0001 616#define ASC_CNTL_BIOS_GT_1GB (ushort)0x0002 617#define ASC_CNTL_BIOS_GT_2_DISK (ushort)0x0004 618#define ASC_CNTL_BIOS_REMOVABLE (ushort)0x0008 619#define ASC_CNTL_NO_SCAM (ushort)0x0010 620#define ASC_CNTL_INT_MULTI_Q (ushort)0x0080 621#define ASC_CNTL_NO_LUN_SUPPORT (ushort)0x0040 622#define ASC_CNTL_NO_VERIFY_COPY (ushort)0x0100 623#define ASC_CNTL_RESET_SCSI (ushort)0x0200 624#define ASC_CNTL_INIT_INQUIRY (ushort)0x0400 625#define ASC_CNTL_INIT_VERBOSE (ushort)0x0800 626#define ASC_CNTL_SCSI_PARITY (ushort)0x1000 627#define ASC_CNTL_BURST_MODE (ushort)0x2000 628#define ASC_CNTL_SDTR_ENABLE_ULTRA (ushort)0x4000 629#define ASC_EEP_DVC_CFG_BEG_VL 2 630#define ASC_EEP_MAX_DVC_ADDR_VL 15 631#define ASC_EEP_DVC_CFG_BEG 32 632#define ASC_EEP_MAX_DVC_ADDR 45 633#define ASC_EEP_MAX_RETRY 20 634 635/* 636 * These macros keep the chip SCSI id and ISA DMA speed 637 * bitfields in board order. C bitfields aren't portable 638 * between big and little-endian platforms so they are 639 * not used. 640 */ 641 642#define ASC_EEP_GET_CHIP_ID(cfg) ((cfg)->id_speed & 0x0f) 643#define ASC_EEP_GET_DMA_SPD(cfg) (((cfg)->id_speed & 0xf0) >> 4) 644#define ASC_EEP_SET_CHIP_ID(cfg, sid) \ 645 ((cfg)->id_speed = ((cfg)->id_speed & 0xf0) | ((sid) & ASC_MAX_TID)) 646#define ASC_EEP_SET_DMA_SPD(cfg, spd) \ 647 ((cfg)->id_speed = ((cfg)->id_speed & 0x0f) | ((spd) & 0x0f) << 4) 648 649typedef struct asceep_config { 650 ushort cfg_lsw; 651 ushort cfg_msw; 652 uchar init_sdtr; 653 uchar disc_enable; 654 uchar use_cmd_qng; 655 uchar start_motor; 656 uchar max_total_qng; 657 uchar max_tag_qng; 658 uchar bios_scan; 659 uchar power_up_wait; 660 uchar no_scam; 661 uchar id_speed; /* low order 4 bits is chip scsi id */ 662 /* high order 4 bits is isa dma speed */ 663 uchar dos_int13_table[ASC_MAX_TID + 1]; 664 uchar adapter_info[6]; 665 ushort cntl; 666 ushort chksum; 667} ASCEEP_CONFIG; 668 669#define ASC_EEP_CMD_READ 0x80 670#define ASC_EEP_CMD_WRITE 0x40 671#define ASC_EEP_CMD_WRITE_ABLE 0x30 672#define ASC_EEP_CMD_WRITE_DISABLE 0x00 673#define ASCV_MSGOUT_BEG 0x0000 674#define ASCV_MSGOUT_SDTR_PERIOD (ASCV_MSGOUT_BEG+3) 675#define ASCV_MSGOUT_SDTR_OFFSET (ASCV_MSGOUT_BEG+4) 676#define ASCV_BREAK_SAVED_CODE (ushort)0x0006 677#define ASCV_MSGIN_BEG (ASCV_MSGOUT_BEG+8) 678#define ASCV_MSGIN_SDTR_PERIOD (ASCV_MSGIN_BEG+3) 679#define ASCV_MSGIN_SDTR_OFFSET (ASCV_MSGIN_BEG+4) 680#define ASCV_SDTR_DATA_BEG (ASCV_MSGIN_BEG+8) 681#define ASCV_SDTR_DONE_BEG (ASCV_SDTR_DATA_BEG+8) 682#define ASCV_MAX_DVC_QNG_BEG (ushort)0x0020 683#define ASCV_BREAK_ADDR (ushort)0x0028 684#define ASCV_BREAK_NOTIFY_COUNT (ushort)0x002A 685#define ASCV_BREAK_CONTROL (ushort)0x002C 686#define ASCV_BREAK_HIT_COUNT (ushort)0x002E 687 688#define ASCV_ASCDVC_ERR_CODE_W (ushort)0x0030 689#define ASCV_MCODE_CHKSUM_W (ushort)0x0032 690#define ASCV_MCODE_SIZE_W (ushort)0x0034 691#define ASCV_STOP_CODE_B (ushort)0x0036 692#define ASCV_DVC_ERR_CODE_B (ushort)0x0037 693#define ASCV_OVERRUN_PADDR_D (ushort)0x0038 694#define ASCV_OVERRUN_BSIZE_D (ushort)0x003C 695#define ASCV_HALTCODE_W (ushort)0x0040 696#define ASCV_CHKSUM_W (ushort)0x0042 697#define ASCV_MC_DATE_W (ushort)0x0044 698#define ASCV_MC_VER_W (ushort)0x0046 699#define ASCV_NEXTRDY_B (ushort)0x0048 700#define ASCV_DONENEXT_B (ushort)0x0049 701#define ASCV_USE_TAGGED_QNG_B (ushort)0x004A 702#define ASCV_SCSIBUSY_B (ushort)0x004B 703#define ASCV_Q_DONE_IN_PROGRESS_B (ushort)0x004C 704#define ASCV_CURCDB_B (ushort)0x004D 705#define ASCV_RCLUN_B (ushort)0x004E 706#define ASCV_BUSY_QHEAD_B (ushort)0x004F 707#define ASCV_DISC1_QHEAD_B (ushort)0x0050 708#define ASCV_DISC_ENABLE_B (ushort)0x0052 709#define ASCV_CAN_TAGGED_QNG_B (ushort)0x0053 710#define ASCV_HOSTSCSI_ID_B (ushort)0x0055 711#define ASCV_MCODE_CNTL_B (ushort)0x0056 712#define ASCV_NULL_TARGET_B (ushort)0x0057 713#define ASCV_FREE_Q_HEAD_W (ushort)0x0058 714#define ASCV_DONE_Q_TAIL_W (ushort)0x005A 715#define ASCV_FREE_Q_HEAD_B (ushort)(ASCV_FREE_Q_HEAD_W+1) 716#define ASCV_DONE_Q_TAIL_B (ushort)(ASCV_DONE_Q_TAIL_W+1) 717#define ASCV_HOST_FLAG_B (ushort)0x005D 718#define ASCV_TOTAL_READY_Q_B (ushort)0x0064 719#define ASCV_VER_SERIAL_B (ushort)0x0065 720#define ASCV_HALTCODE_SAVED_W (ushort)0x0066 721#define ASCV_WTM_FLAG_B (ushort)0x0068 722#define ASCV_RISC_FLAG_B (ushort)0x006A 723#define ASCV_REQ_SG_LIST_QP (ushort)0x006B 724#define ASC_HOST_FLAG_IN_ISR 0x01 725#define ASC_HOST_FLAG_ACK_INT 0x02 726#define ASC_RISC_FLAG_GEN_INT 0x01 727#define ASC_RISC_FLAG_REQ_SG_LIST 0x02 728#define IOP_CTRL (0x0F) 729#define IOP_STATUS (0x0E) 730#define IOP_INT_ACK IOP_STATUS 731#define IOP_REG_IFC (0x0D) 732#define IOP_SYN_OFFSET (0x0B) 733#define IOP_EXTRA_CONTROL (0x0D) 734#define IOP_REG_PC (0x0C) 735#define IOP_RAM_ADDR (0x0A) 736#define IOP_RAM_DATA (0x08) 737#define IOP_EEP_DATA (0x06) 738#define IOP_EEP_CMD (0x07) 739#define IOP_VERSION (0x03) 740#define IOP_CONFIG_HIGH (0x04) 741#define IOP_CONFIG_LOW (0x02) 742#define IOP_SIG_BYTE (0x01) 743#define IOP_SIG_WORD (0x00) 744#define IOP_REG_DC1 (0x0E) 745#define IOP_REG_DC0 (0x0C) 746#define IOP_REG_SB (0x0B) 747#define IOP_REG_DA1 (0x0A) 748#define IOP_REG_DA0 (0x08) 749#define IOP_REG_SC (0x09) 750#define IOP_DMA_SPEED (0x07) 751#define IOP_REG_FLAG (0x07) 752#define IOP_FIFO_H (0x06) 753#define IOP_FIFO_L (0x04) 754#define IOP_REG_ID (0x05) 755#define IOP_REG_QP (0x03) 756#define IOP_REG_IH (0x02) 757#define IOP_REG_IX (0x01) 758#define IOP_REG_AX (0x00) 759#define IFC_REG_LOCK (0x00) 760#define IFC_REG_UNLOCK (0x09) 761#define IFC_WR_EN_FILTER (0x10) 762#define IFC_RD_NO_EEPROM (0x10) 763#define IFC_SLEW_RATE (0x20) 764#define IFC_ACT_NEG (0x40) 765#define IFC_INP_FILTER (0x80) 766#define IFC_INIT_DEFAULT (IFC_ACT_NEG | IFC_REG_UNLOCK) 767#define SC_SEL (uchar)(0x80) 768#define SC_BSY (uchar)(0x40) 769#define SC_ACK (uchar)(0x20) 770#define SC_REQ (uchar)(0x10) 771#define SC_ATN (uchar)(0x08) 772#define SC_IO (uchar)(0x04) 773#define SC_CD (uchar)(0x02) 774#define SC_MSG (uchar)(0x01) 775#define SEC_SCSI_CTL (uchar)(0x80) 776#define SEC_ACTIVE_NEGATE (uchar)(0x40) 777#define SEC_SLEW_RATE (uchar)(0x20) 778#define SEC_ENABLE_FILTER (uchar)(0x10) 779#define ASC_HALT_EXTMSG_IN (ushort)0x8000 780#define ASC_HALT_CHK_CONDITION (ushort)0x8100 781#define ASC_HALT_SS_QUEUE_FULL (ushort)0x8200 782#define ASC_HALT_DISABLE_ASYN_USE_SYN_FIX (ushort)0x8300 783#define ASC_HALT_ENABLE_ASYN_USE_SYN_FIX (ushort)0x8400 784#define ASC_HALT_SDTR_REJECTED (ushort)0x4000 785#define ASC_HALT_HOST_COPY_SG_LIST_TO_RISC ( ushort )0x2000 786#define ASC_MAX_QNO 0xF8 787#define ASC_DATA_SEC_BEG (ushort)0x0080 788#define ASC_DATA_SEC_END (ushort)0x0080 789#define ASC_CODE_SEC_BEG (ushort)0x0080 790#define ASC_CODE_SEC_END (ushort)0x0080 791#define ASC_QADR_BEG (0x4000) 792#define ASC_QADR_USED (ushort)(ASC_MAX_QNO * 64) 793#define ASC_QADR_END (ushort)0x7FFF 794#define ASC_QLAST_ADR (ushort)0x7FC0 795#define ASC_QBLK_SIZE 0x40 796#define ASC_BIOS_DATA_QBEG 0xF8 797#define ASC_MIN_ACTIVE_QNO 0x01 798#define ASC_QLINK_END 0xFF 799#define ASC_EEPROM_WORDS 0x10 800#define ASC_MAX_MGS_LEN 0x10 801#define ASC_BIOS_ADDR_DEF 0xDC00 802#define ASC_BIOS_SIZE 0x3800 803#define ASC_BIOS_RAM_OFF 0x3800 804#define ASC_BIOS_RAM_SIZE 0x800 805#define ASC_BIOS_MIN_ADDR 0xC000 806#define ASC_BIOS_MAX_ADDR 0xEC00 807#define ASC_BIOS_BANK_SIZE 0x0400 808#define ASC_MCODE_START_ADDR 0x0080 809#define ASC_CFG0_HOST_INT_ON 0x0020 810#define ASC_CFG0_BIOS_ON 0x0040 811#define ASC_CFG0_VERA_BURST_ON 0x0080 812#define ASC_CFG0_SCSI_PARITY_ON 0x0800 813#define ASC_CFG1_SCSI_TARGET_ON 0x0080 814#define ASC_CFG1_LRAM_8BITS_ON 0x0800 815#define ASC_CFG_MSW_CLR_MASK 0x3080 816#define CSW_TEST1 (ASC_CS_TYPE)0x8000 817#define CSW_AUTO_CONFIG (ASC_CS_TYPE)0x4000 818#define CSW_RESERVED1 (ASC_CS_TYPE)0x2000 819#define CSW_IRQ_WRITTEN (ASC_CS_TYPE)0x1000 820#define CSW_33MHZ_SELECTED (ASC_CS_TYPE)0x0800 821#define CSW_TEST2 (ASC_CS_TYPE)0x0400 822#define CSW_TEST3 (ASC_CS_TYPE)0x0200 823#define CSW_RESERVED2 (ASC_CS_TYPE)0x0100 824#define CSW_DMA_DONE (ASC_CS_TYPE)0x0080 825#define CSW_FIFO_RDY (ASC_CS_TYPE)0x0040 826#define CSW_EEP_READ_DONE (ASC_CS_TYPE)0x0020 827#define CSW_HALTED (ASC_CS_TYPE)0x0010 828#define CSW_SCSI_RESET_ACTIVE (ASC_CS_TYPE)0x0008 829#define CSW_PARITY_ERR (ASC_CS_TYPE)0x0004 830#define CSW_SCSI_RESET_LATCH (ASC_CS_TYPE)0x0002 831#define CSW_INT_PENDING (ASC_CS_TYPE)0x0001 832#define CIW_CLR_SCSI_RESET_INT (ASC_CS_TYPE)0x1000 833#define CIW_INT_ACK (ASC_CS_TYPE)0x0100 834#define CIW_TEST1 (ASC_CS_TYPE)0x0200 835#define CIW_TEST2 (ASC_CS_TYPE)0x0400 836#define CIW_SEL_33MHZ (ASC_CS_TYPE)0x0800 837#define CIW_IRQ_ACT (ASC_CS_TYPE)0x1000 838#define CC_CHIP_RESET (uchar)0x80 839#define CC_SCSI_RESET (uchar)0x40 840#define CC_HALT (uchar)0x20 841#define CC_SINGLE_STEP (uchar)0x10 842#define CC_DMA_ABLE (uchar)0x08 843#define CC_TEST (uchar)0x04 844#define CC_BANK_ONE (uchar)0x02 845#define CC_DIAG (uchar)0x01 846#define ASC_1000_ID0W 0x04C1 847#define ASC_1000_ID0W_FIX 0x00C1 848#define ASC_1000_ID1B 0x25 849#define ASC_EISA_REV_IOP_MASK (0x0C83) 850#define ASC_EISA_CFG_IOP_MASK (0x0C86) 851#define ASC_GET_EISA_SLOT(iop) (PortAddr)((iop) & 0xF000) 852#define INS_HALTINT (ushort)0x6281 853#define INS_HALT (ushort)0x6280 854#define INS_SINT (ushort)0x6200 855#define INS_RFLAG_WTM (ushort)0x7380 856#define ASC_MC_SAVE_CODE_WSIZE 0x500 857#define ASC_MC_SAVE_DATA_WSIZE 0x40 858 859typedef struct asc_mc_saved { 860 ushort data[ASC_MC_SAVE_DATA_WSIZE]; 861 ushort code[ASC_MC_SAVE_CODE_WSIZE]; 862} ASC_MC_SAVED; 863 864#define AscGetQDoneInProgress(port) AscReadLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B) 865#define AscPutQDoneInProgress(port, val) AscWriteLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B, val) 866#define AscGetVarFreeQHead(port) AscReadLramWord((port), ASCV_FREE_Q_HEAD_W) 867#define AscGetVarDoneQTail(port) AscReadLramWord((port), ASCV_DONE_Q_TAIL_W) 868#define AscPutVarFreeQHead(port, val) AscWriteLramWord((port), ASCV_FREE_Q_HEAD_W, val) 869#define AscPutVarDoneQTail(port, val) AscWriteLramWord((port), ASCV_DONE_Q_TAIL_W, val) 870#define AscGetRiscVarFreeQHead(port) AscReadLramByte((port), ASCV_NEXTRDY_B) 871#define AscGetRiscVarDoneQTail(port) AscReadLramByte((port), ASCV_DONENEXT_B) 872#define AscPutRiscVarFreeQHead(port, val) AscWriteLramByte((port), ASCV_NEXTRDY_B, val) 873#define AscPutRiscVarDoneQTail(port, val) AscWriteLramByte((port), ASCV_DONENEXT_B, val) 874#define AscPutMCodeSDTRDoneAtID(port, id, data) AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG+(ushort)id), (data)) 875#define AscGetMCodeSDTRDoneAtID(port, id) AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG+(ushort)id)) 876#define AscPutMCodeInitSDTRAtID(port, id, data) AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG+(ushort)id), data) 877#define AscGetMCodeInitSDTRAtID(port, id) AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG+(ushort)id)) 878#define AscGetChipSignatureByte(port) (uchar)inp((port)+IOP_SIG_BYTE) 879#define AscGetChipSignatureWord(port) (ushort)inpw((port)+IOP_SIG_WORD) 880#define AscGetChipVerNo(port) (uchar)inp((port)+IOP_VERSION) 881#define AscGetChipCfgLsw(port) (ushort)inpw((port)+IOP_CONFIG_LOW) 882#define AscGetChipCfgMsw(port) (ushort)inpw((port)+IOP_CONFIG_HIGH) 883#define AscSetChipCfgLsw(port, data) outpw((port)+IOP_CONFIG_LOW, data) 884#define AscSetChipCfgMsw(port, data) outpw((port)+IOP_CONFIG_HIGH, data) 885#define AscGetChipEEPCmd(port) (uchar)inp((port)+IOP_EEP_CMD) 886#define AscSetChipEEPCmd(port, data) outp((port)+IOP_EEP_CMD, data) 887#define AscGetChipEEPData(port) (ushort)inpw((port)+IOP_EEP_DATA) 888#define AscSetChipEEPData(port, data) outpw((port)+IOP_EEP_DATA, data) 889#define AscGetChipLramAddr(port) (ushort)inpw((PortAddr)((port)+IOP_RAM_ADDR)) 890#define AscSetChipLramAddr(port, addr) outpw((PortAddr)((port)+IOP_RAM_ADDR), addr) 891#define AscGetChipLramData(port) (ushort)inpw((port)+IOP_RAM_DATA) 892#define AscSetChipLramData(port, data) outpw((port)+IOP_RAM_DATA, data) 893#define AscGetChipIFC(port) (uchar)inp((port)+IOP_REG_IFC) 894#define AscSetChipIFC(port, data) outp((port)+IOP_REG_IFC, data) 895#define AscGetChipStatus(port) (ASC_CS_TYPE)inpw((port)+IOP_STATUS) 896#define AscSetChipStatus(port, cs_val) outpw((port)+IOP_STATUS, cs_val) 897#define AscGetChipControl(port) (uchar)inp((port)+IOP_CTRL) 898#define AscSetChipControl(port, cc_val) outp((port)+IOP_CTRL, cc_val) 899#define AscGetChipSyn(port) (uchar)inp((port)+IOP_SYN_OFFSET) 900#define AscSetChipSyn(port, data) outp((port)+IOP_SYN_OFFSET, data) 901#define AscSetPCAddr(port, data) outpw((port)+IOP_REG_PC, data) 902#define AscGetPCAddr(port) (ushort)inpw((port)+IOP_REG_PC) 903#define AscIsIntPending(port) (AscGetChipStatus(port) & (CSW_INT_PENDING | CSW_SCSI_RESET_LATCH)) 904#define AscGetChipScsiID(port) ((AscGetChipCfgLsw(port) >> 8) & ASC_MAX_TID) 905#define AscGetExtraControl(port) (uchar)inp((port)+IOP_EXTRA_CONTROL) 906#define AscSetExtraControl(port, data) outp((port)+IOP_EXTRA_CONTROL, data) 907#define AscReadChipAX(port) (ushort)inpw((port)+IOP_REG_AX) 908#define AscWriteChipAX(port, data) outpw((port)+IOP_REG_AX, data) 909#define AscReadChipIX(port) (uchar)inp((port)+IOP_REG_IX) 910#define AscWriteChipIX(port, data) outp((port)+IOP_REG_IX, data) 911#define AscReadChipIH(port) (ushort)inpw((port)+IOP_REG_IH) 912#define AscWriteChipIH(port, data) outpw((port)+IOP_REG_IH, data) 913#define AscReadChipQP(port) (uchar)inp((port)+IOP_REG_QP) 914#define AscWriteChipQP(port, data) outp((port)+IOP_REG_QP, data) 915#define AscReadChipFIFO_L(port) (ushort)inpw((port)+IOP_REG_FIFO_L) 916#define AscWriteChipFIFO_L(port, data) outpw((port)+IOP_REG_FIFO_L, data) 917#define AscReadChipFIFO_H(port) (ushort)inpw((port)+IOP_REG_FIFO_H) 918#define AscWriteChipFIFO_H(port, data) outpw((port)+IOP_REG_FIFO_H, data) 919#define AscReadChipDmaSpeed(port) (uchar)inp((port)+IOP_DMA_SPEED) 920#define AscWriteChipDmaSpeed(port, data) outp((port)+IOP_DMA_SPEED, data) 921#define AscReadChipDA0(port) (ushort)inpw((port)+IOP_REG_DA0) 922#define AscWriteChipDA0(port) outpw((port)+IOP_REG_DA0, data) 923#define AscReadChipDA1(port) (ushort)inpw((port)+IOP_REG_DA1) 924#define AscWriteChipDA1(port) outpw((port)+IOP_REG_DA1, data) 925#define AscReadChipDC0(port) (ushort)inpw((port)+IOP_REG_DC0) 926#define AscWriteChipDC0(port) outpw((port)+IOP_REG_DC0, data) 927#define AscReadChipDC1(port) (ushort)inpw((port)+IOP_REG_DC1) 928#define AscWriteChipDC1(port) outpw((port)+IOP_REG_DC1, data) 929#define AscReadChipDvcID(port) (uchar)inp((port)+IOP_REG_ID) 930#define AscWriteChipDvcID(port, data) outp((port)+IOP_REG_ID, data) 931 932/* 933 * Portable Data Types 934 * 935 * Any instance where a 32-bit long or pointer type is assumed 936 * for precision or HW defined structures, the following define 937 * types must be used. In Linux the char, short, and int types 938 * are all consistent at 8, 16, and 32 bits respectively. Pointers 939 * and long types are 64 bits on Alpha and UltraSPARC. 940 */ 941#define ADV_PADDR __u32 /* Physical address data type. */ 942#define ADV_VADDR __u32 /* Virtual address data type. */ 943#define ADV_DCNT __u32 /* Unsigned Data count type. */ 944#define ADV_SDCNT __s32 /* Signed Data count type. */ 945 946/* 947 * These macros are used to convert a virtual address to a 948 * 32-bit value. This currently can be used on Linux Alpha 949 * which uses 64-bit virtual address but a 32-bit bus address. 950 * This is likely to break in the future, but doing this now 951 * will give us time to change the HW and FW to handle 64-bit 952 * addresses. 953 */ 954#define ADV_VADDR_TO_U32 virt_to_bus 955#define ADV_U32_TO_VADDR bus_to_virt 956 957#define AdvPortAddr void __iomem * /* Virtual memory address size */ 958 959/* 960 * Define Adv Library required memory access macros. 961 */ 962#define ADV_MEM_READB(addr) readb(addr) 963#define ADV_MEM_READW(addr) readw(addr) 964#define ADV_MEM_WRITEB(addr, byte) writeb(byte, addr) 965#define ADV_MEM_WRITEW(addr, word) writew(word, addr) 966#define ADV_MEM_WRITEDW(addr, dword) writel(dword, addr) 967 968#define ADV_CARRIER_COUNT (ASC_DEF_MAX_HOST_QNG + 15) 969 970/* 971 * Define total number of simultaneous maximum element scatter-gather 972 * request blocks per wide adapter. ASC_DEF_MAX_HOST_QNG (253) is the 973 * maximum number of outstanding commands per wide host adapter. Each 974 * command uses one or more ADV_SG_BLOCK each with 15 scatter-gather 975 * elements. Allow each command to have at least one ADV_SG_BLOCK structure. 976 * This allows about 15 commands to have the maximum 17 ADV_SG_BLOCK 977 * structures or 255 scatter-gather elements. 978 */ 979#define ADV_TOT_SG_BLOCK ASC_DEF_MAX_HOST_QNG 980 981/* 982 * Define maximum number of scatter-gather elements per request. 983 */ 984#define ADV_MAX_SG_LIST 255 985#define NO_OF_SG_PER_BLOCK 15 986 987#define ADV_EEP_DVC_CFG_BEGIN (0x00) 988#define ADV_EEP_DVC_CFG_END (0x15) 989#define ADV_EEP_DVC_CTL_BEGIN (0x16) /* location of OEM name */ 990#define ADV_EEP_MAX_WORD_ADDR (0x1E) 991 992#define ADV_EEP_DELAY_MS 100 993 994#define ADV_EEPROM_BIG_ENDIAN 0x8000 /* EEPROM Bit 15 */ 995#define ADV_EEPROM_BIOS_ENABLE 0x4000 /* EEPROM Bit 14 */ 996/* 997 * For the ASC3550 Bit 13 is Termination Polarity control bit. 998 * For later ICs Bit 13 controls whether the CIS (Card Information 999 * Service Section) is loaded from EEPROM. 1000 */ 1001#define ADV_EEPROM_TERM_POL 0x2000 /* EEPROM Bit 13 */ 1002#define ADV_EEPROM_CIS_LD 0x2000 /* EEPROM Bit 13 */ 1003/* 1004 * ASC38C1600 Bit 11 1005 * 1006 * If EEPROM Bit 11 is 0 for Function 0, then Function 0 will specify 1007 * INT A in the PCI Configuration Space Int Pin field. If it is 1, then 1008 * Function 0 will specify INT B. 1009 * 1010 * If EEPROM Bit 11 is 0 for Function 1, then Function 1 will specify 1011 * INT B in the PCI Configuration Space Int Pin field. If it is 1, then 1012 * Function 1 will specify INT A. 1013 */ 1014#define ADV_EEPROM_INTAB 0x0800 /* EEPROM Bit 11 */ 1015 1016typedef struct adveep_3550_config { 1017 /* Word Offset, Description */ 1018 1019 ushort cfg_lsw; /* 00 power up initialization */ 1020 /* bit 13 set - Term Polarity Control */ 1021 /* bit 14 set - BIOS Enable */ 1022 /* bit 15 set - Big Endian Mode */ 1023 ushort cfg_msw; /* 01 unused */ 1024 ushort disc_enable; /* 02 disconnect enable */ 1025 ushort wdtr_able; /* 03 Wide DTR able */ 1026 ushort sdtr_able; /* 04 Synchronous DTR able */ 1027 ushort start_motor; /* 05 send start up motor */ 1028 ushort tagqng_able; /* 06 tag queuing able */ 1029 ushort bios_scan; /* 07 BIOS device control */ 1030 ushort scam_tolerant; /* 08 no scam */ 1031 1032 uchar adapter_scsi_id; /* 09 Host Adapter ID */ 1033 uchar bios_boot_delay; /* power up wait */ 1034 1035 uchar scsi_reset_delay; /* 10 reset delay */ 1036 uchar bios_id_lun; /* first boot device scsi id & lun */ 1037 /* high nibble is lun */ 1038 /* low nibble is scsi id */ 1039 1040 uchar termination; /* 11 0 - automatic */ 1041 /* 1 - low off / high off */ 1042 /* 2 - low off / high on */ 1043 /* 3 - low on / high on */ 1044 /* There is no low on / high off */ 1045 1046 uchar reserved1; /* reserved byte (not used) */ 1047 1048 ushort bios_ctrl; /* 12 BIOS control bits */ 1049 /* bit 0 BIOS don't act as initiator. */ 1050 /* bit 1 BIOS > 1 GB support */ 1051 /* bit 2 BIOS > 2 Disk Support */ 1052 /* bit 3 BIOS don't support removables */ 1053 /* bit 4 BIOS support bootable CD */ 1054 /* bit 5 BIOS scan enabled */ 1055 /* bit 6 BIOS support multiple LUNs */ 1056 /* bit 7 BIOS display of message */ 1057 /* bit 8 SCAM disabled */ 1058 /* bit 9 Reset SCSI bus during init. */ 1059 /* bit 10 */ 1060 /* bit 11 No verbose initialization. */ 1061 /* bit 12 SCSI parity enabled */ 1062 /* bit 13 */ 1063 /* bit 14 */ 1064 /* bit 15 */ 1065 ushort ultra_able; /* 13 ULTRA speed able */ 1066 ushort reserved2; /* 14 reserved */ 1067 uchar max_host_qng; /* 15 maximum host queuing */ 1068 uchar max_dvc_qng; /* maximum per device queuing */ 1069 ushort dvc_cntl; /* 16 control bit for driver */ 1070 ushort bug_fix; /* 17 control bit for bug fix */ 1071 ushort serial_number_word1; /* 18 Board serial number word 1 */ 1072 ushort serial_number_word2; /* 19 Board serial number word 2 */ 1073 ushort serial_number_word3; /* 20 Board serial number word 3 */ 1074 ushort check_sum; /* 21 EEP check sum */ 1075 uchar oem_name[16]; /* 22 OEM name */ 1076 ushort dvc_err_code; /* 30 last device driver error code */ 1077 ushort adv_err_code; /* 31 last uc and Adv Lib error code */ 1078 ushort adv_err_addr; /* 32 last uc error address */ 1079 ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */ 1080 ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */ 1081 ushort saved_adv_err_addr; /* 35 saved last uc error address */ 1082 ushort num_of_err; /* 36 number of error */ 1083} ADVEEP_3550_CONFIG; 1084 1085typedef struct adveep_38C0800_config { 1086 /* Word Offset, Description */ 1087 1088 ushort cfg_lsw; /* 00 power up initialization */ 1089 /* bit 13 set - Load CIS */ 1090 /* bit 14 set - BIOS Enable */ 1091 /* bit 15 set - Big Endian Mode */ 1092 ushort cfg_msw; /* 01 unused */ 1093 ushort disc_enable; /* 02 disconnect enable */ 1094 ushort wdtr_able; /* 03 Wide DTR able */ 1095 ushort sdtr_speed1; /* 04 SDTR Speed TID 0-3 */ 1096 ushort start_motor; /* 05 send start up motor */ 1097 ushort tagqng_able; /* 06 tag queuing able */ 1098 ushort bios_scan; /* 07 BIOS device control */ 1099 ushort scam_tolerant; /* 08 no scam */ 1100 1101 uchar adapter_scsi_id; /* 09 Host Adapter ID */ 1102 uchar bios_boot_delay; /* power up wait */ 1103 1104 uchar scsi_reset_delay; /* 10 reset delay */ 1105 uchar bios_id_lun; /* first boot device scsi id & lun */ 1106 /* high nibble is lun */ 1107 /* low nibble is scsi id */ 1108 1109 uchar termination_se; /* 11 0 - automatic */ 1110 /* 1 - low off / high off */ 1111 /* 2 - low off / high on */ 1112 /* 3 - low on / high on */ 1113 /* There is no low on / high off */ 1114 1115 uchar termination_lvd; /* 11 0 - automatic */ 1116 /* 1 - low off / high off */ 1117 /* 2 - low off / high on */ 1118 /* 3 - low on / high on */ 1119 /* There is no low on / high off */ 1120 1121 ushort bios_ctrl; /* 12 BIOS control bits */ 1122 /* bit 0 BIOS don't act as initiator. */ 1123 /* bit 1 BIOS > 1 GB support */ 1124 /* bit 2 BIOS > 2 Disk Support */ 1125 /* bit 3 BIOS don't support removables */ 1126 /* bit 4 BIOS support bootable CD */ 1127 /* bit 5 BIOS scan enabled */ 1128 /* bit 6 BIOS support multiple LUNs */ 1129 /* bit 7 BIOS display of message */ 1130 /* bit 8 SCAM disabled */ 1131 /* bit 9 Reset SCSI bus during init. */ 1132 /* bit 10 */ 1133 /* bit 11 No verbose initialization. */ 1134 /* bit 12 SCSI parity enabled */ 1135 /* bit 13 */ 1136 /* bit 14 */ 1137 /* bit 15 */ 1138 ushort sdtr_speed2; /* 13 SDTR speed TID 4-7 */ 1139 ushort sdtr_speed3; /* 14 SDTR speed TID 8-11 */ 1140 uchar max_host_qng; /* 15 maximum host queueing */ 1141 uchar max_dvc_qng; /* maximum per device queuing */ 1142 ushort dvc_cntl; /* 16 control bit for driver */ 1143 ushort sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */ 1144 ushort serial_number_word1; /* 18 Board serial number word 1 */ 1145 ushort serial_number_word2; /* 19 Board serial number word 2 */ 1146 ushort serial_number_word3; /* 20 Board serial number word 3 */ 1147 ushort check_sum; /* 21 EEP check sum */ 1148 uchar oem_name[16]; /* 22 OEM name */ 1149 ushort dvc_err_code; /* 30 last device driver error code */ 1150 ushort adv_err_code; /* 31 last uc and Adv Lib error code */ 1151 ushort adv_err_addr; /* 32 last uc error address */ 1152 ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */ 1153 ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */ 1154 ushort saved_adv_err_addr; /* 35 saved last uc error address */ 1155 ushort reserved36; /* 36 reserved */ 1156 ushort reserved37; /* 37 reserved */ 1157 ushort reserved38; /* 38 reserved */ 1158 ushort reserved39; /* 39 reserved */ 1159 ushort reserved40; /* 40 reserved */ 1160 ushort reserved41; /* 41 reserved */ 1161 ushort reserved42; /* 42 reserved */ 1162 ushort reserved43; /* 43 reserved */ 1163 ushort reserved44; /* 44 reserved */ 1164 ushort reserved45; /* 45 reserved */ 1165 ushort reserved46; /* 46 reserved */ 1166 ushort reserved47; /* 47 reserved */ 1167 ushort reserved48; /* 48 reserved */ 1168 ushort reserved49; /* 49 reserved */ 1169 ushort reserved50; /* 50 reserved */ 1170 ushort reserved51; /* 51 reserved */ 1171 ushort reserved52; /* 52 reserved */ 1172 ushort reserved53; /* 53 reserved */ 1173 ushort reserved54; /* 54 reserved */ 1174 ushort reserved55; /* 55 reserved */ 1175 ushort cisptr_lsw; /* 56 CIS PTR LSW */ 1176 ushort cisprt_msw; /* 57 CIS PTR MSW */ 1177 ushort subsysvid; /* 58 SubSystem Vendor ID */ 1178 ushort subsysid; /* 59 SubSystem ID */ 1179 ushort reserved60; /* 60 reserved */ 1180 ushort reserved61; /* 61 reserved */ 1181 ushort reserved62; /* 62 reserved */ 1182 ushort reserved63; /* 63 reserved */ 1183} ADVEEP_38C0800_CONFIG; 1184 1185typedef struct adveep_38C1600_config { 1186 /* Word Offset, Description */ 1187 1188 ushort cfg_lsw; /* 00 power up initialization */ 1189 /* bit 11 set - Func. 0 INTB, Func. 1 INTA */ 1190 /* clear - Func. 0 INTA, Func. 1 INTB */ 1191 /* bit 13 set - Load CIS */ 1192 /* bit 14 set - BIOS Enable */ 1193 /* bit 15 set - Big Endian Mode */ 1194 ushort cfg_msw; /* 01 unused */ 1195 ushort disc_enable; /* 02 disconnect enable */ 1196 ushort wdtr_able; /* 03 Wide DTR able */ 1197 ushort sdtr_speed1; /* 04 SDTR Speed TID 0-3 */ 1198 ushort start_motor; /* 05 send start up motor */ 1199 ushort tagqng_able; /* 06 tag queuing able */ 1200 ushort bios_scan; /* 07 BIOS device control */ 1201 ushort scam_tolerant; /* 08 no scam */ 1202 1203 uchar adapter_scsi_id; /* 09 Host Adapter ID */ 1204 uchar bios_boot_delay; /* power up wait */ 1205 1206 uchar scsi_reset_delay; /* 10 reset delay */ 1207 uchar bios_id_lun; /* first boot device scsi id & lun */ 1208 /* high nibble is lun */ 1209 /* low nibble is scsi id */ 1210 1211 uchar termination_se; /* 11 0 - automatic */ 1212 /* 1 - low off / high off */ 1213 /* 2 - low off / high on */ 1214 /* 3 - low on / high on */ 1215 /* There is no low on / high off */ 1216 1217 uchar termination_lvd; /* 11 0 - automatic */ 1218 /* 1 - low off / high off */ 1219 /* 2 - low off / high on */ 1220 /* 3 - low on / high on */ 1221 /* There is no low on / high off */ 1222 1223 ushort bios_ctrl; /* 12 BIOS control bits */ 1224 /* bit 0 BIOS don't act as initiator. */ 1225 /* bit 1 BIOS > 1 GB support */ 1226 /* bit 2 BIOS > 2 Disk Support */ 1227 /* bit 3 BIOS don't support removables */ 1228 /* bit 4 BIOS support bootable CD */ 1229 /* bit 5 BIOS scan enabled */ 1230 /* bit 6 BIOS support multiple LUNs */ 1231 /* bit 7 BIOS display of message */ 1232 /* bit 8 SCAM disabled */ 1233 /* bit 9 Reset SCSI bus during init. */ 1234 /* bit 10 Basic Integrity Checking disabled */ 1235 /* bit 11 No verbose initialization. */ 1236 /* bit 12 SCSI parity enabled */ 1237 /* bit 13 AIPP (Asyn. Info. Ph. Prot.) dis. */ 1238 /* bit 14 */ 1239 /* bit 15 */ 1240 ushort sdtr_speed2; /* 13 SDTR speed TID 4-7 */ 1241 ushort sdtr_speed3; /* 14 SDTR speed TID 8-11 */ 1242 uchar max_host_qng; /* 15 maximum host queueing */ 1243 uchar max_dvc_qng; /* maximum per device queuing */ 1244 ushort dvc_cntl; /* 16 control bit for driver */ 1245 ushort sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */ 1246 ushort serial_number_word1; /* 18 Board serial number word 1 */ 1247 ushort serial_number_word2; /* 19 Board serial number word 2 */ 1248 ushort serial_number_word3; /* 20 Board serial number word 3 */ 1249 ushort check_sum; /* 21 EEP check sum */ 1250 uchar oem_name[16]; /* 22 OEM name */ 1251 ushort dvc_err_code; /* 30 last device driver error code */ 1252 ushort adv_err_code; /* 31 last uc and Adv Lib error code */ 1253 ushort adv_err_addr; /* 32 last uc error address */ 1254 ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */ 1255 ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */ 1256 ushort saved_adv_err_addr; /* 35 saved last uc error address */ 1257 ushort reserved36; /* 36 reserved */ 1258 ushort reserved37; /* 37 reserved */ 1259 ushort reserved38; /* 38 reserved */ 1260 ushort reserved39; /* 39 reserved */ 1261 ushort reserved40; /* 40 reserved */ 1262 ushort reserved41; /* 41 reserved */ 1263 ushort reserved42; /* 42 reserved */ 1264 ushort reserved43; /* 43 reserved */ 1265 ushort reserved44; /* 44 reserved */ 1266 ushort reserved45; /* 45 reserved */ 1267 ushort reserved46; /* 46 reserved */ 1268 ushort reserved47; /* 47 reserved */ 1269 ushort reserved48; /* 48 reserved */ 1270 ushort reserved49; /* 49 reserved */ 1271 ushort reserved50; /* 50 reserved */ 1272 ushort reserved51; /* 51 reserved */ 1273 ushort reserved52; /* 52 reserved */ 1274 ushort reserved53; /* 53 reserved */ 1275 ushort reserved54; /* 54 reserved */ 1276 ushort reserved55; /* 55 reserved */ 1277 ushort cisptr_lsw; /* 56 CIS PTR LSW */ 1278 ushort cisprt_msw; /* 57 CIS PTR MSW */ 1279 ushort subsysvid; /* 58 SubSystem Vendor ID */ 1280 ushort subsysid; /* 59 SubSystem ID */ 1281 ushort reserved60; /* 60 reserved */ 1282 ushort reserved61; /* 61 reserved */ 1283 ushort reserved62; /* 62 reserved */ 1284 ushort reserved63; /* 63 reserved */ 1285} ADVEEP_38C1600_CONFIG; 1286 1287/* 1288 * EEPROM Commands 1289 */ 1290#define ASC_EEP_CMD_DONE 0x0200 1291 1292/* bios_ctrl */ 1293#define BIOS_CTRL_BIOS 0x0001 1294#define BIOS_CTRL_EXTENDED_XLAT 0x0002 1295#define BIOS_CTRL_GT_2_DISK 0x0004 1296#define BIOS_CTRL_BIOS_REMOVABLE 0x0008 1297#define BIOS_CTRL_BOOTABLE_CD 0x0010 1298#define BIOS_CTRL_MULTIPLE_LUN 0x0040 1299#define BIOS_CTRL_DISPLAY_MSG 0x0080 1300#define BIOS_CTRL_NO_SCAM 0x0100 1301#define BIOS_CTRL_RESET_SCSI_BUS 0x0200 1302#define BIOS_CTRL_INIT_VERBOSE 0x0800 1303#define BIOS_CTRL_SCSI_PARITY 0x1000 1304#define BIOS_CTRL_AIPP_DIS 0x2000 1305 1306#define ADV_3550_MEMSIZE 0x2000 /* 8 KB Internal Memory */ 1307 1308#define ADV_38C0800_MEMSIZE 0x4000 /* 16 KB Internal Memory */ 1309 1310/* 1311 * XXX - Since ASC38C1600 Rev.3 has a local RAM failure issue, there is 1312 * a special 16K Adv Library and Microcode version. After the issue is 1313 * resolved, should restore 32K support. 1314 * 1315 * #define ADV_38C1600_MEMSIZE 0x8000L * 32 KB Internal Memory * 1316 */ 1317#define ADV_38C1600_MEMSIZE 0x4000 /* 16 KB Internal Memory */ 1318 1319/* 1320 * Byte I/O register address from base of 'iop_base'. 1321 */ 1322#define IOPB_INTR_STATUS_REG 0x00 1323#define IOPB_CHIP_ID_1 0x01 1324#define IOPB_INTR_ENABLES 0x02 1325#define IOPB_CHIP_TYPE_REV 0x03 1326#define IOPB_RES_ADDR_4 0x04 1327#define IOPB_RES_ADDR_5 0x05 1328#define IOPB_RAM_DATA 0x06 1329#define IOPB_RES_ADDR_7 0x07 1330#define IOPB_FLAG_REG 0x08 1331#define IOPB_RES_ADDR_9 0x09 1332#define IOPB_RISC_CSR 0x0A 1333#define IOPB_RES_ADDR_B 0x0B 1334#define IOPB_RES_ADDR_C 0x0C 1335#define IOPB_RES_ADDR_D 0x0D 1336#define IOPB_SOFT_OVER_WR 0x0E 1337#define IOPB_RES_ADDR_F 0x0F 1338#define IOPB_MEM_CFG 0x10 1339#define IOPB_RES_ADDR_11 0x11 1340#define IOPB_GPIO_DATA 0x12 1341#define IOPB_RES_ADDR_13 0x13 1342#define IOPB_FLASH_PAGE 0x14 1343#define IOPB_RES_ADDR_15 0x15 1344#define IOPB_GPIO_CNTL 0x16 1345#define IOPB_RES_ADDR_17 0x17 1346#define IOPB_FLASH_DATA 0x18 1347#define IOPB_RES_ADDR_19 0x19 1348#define IOPB_RES_ADDR_1A 0x1A 1349#define IOPB_RES_ADDR_1B 0x1B 1350#define IOPB_RES_ADDR_1C 0x1C 1351#define IOPB_RES_ADDR_1D 0x1D 1352#define IOPB_RES_ADDR_1E 0x1E 1353#define IOPB_RES_ADDR_1F 0x1F 1354#define IOPB_DMA_CFG0 0x20 1355#define IOPB_DMA_CFG1 0x21 1356#define IOPB_TICKLE 0x22 1357#define IOPB_DMA_REG_WR 0x23 1358#define IOPB_SDMA_STATUS 0x24 1359#define IOPB_SCSI_BYTE_CNT 0x25 1360#define IOPB_HOST_BYTE_CNT 0x26 1361#define IOPB_BYTE_LEFT_TO_XFER 0x27 1362#define IOPB_BYTE_TO_XFER_0 0x28 1363#define IOPB_BYTE_TO_XFER_1 0x29 1364#define IOPB_BYTE_TO_XFER_2 0x2A 1365#define IOPB_BYTE_TO_XFER_3 0x2B 1366#define IOPB_ACC_GRP 0x2C 1367#define IOPB_RES_ADDR_2D 0x2D 1368#define IOPB_DEV_ID 0x2E 1369#define IOPB_RES_ADDR_2F 0x2F 1370#define IOPB_SCSI_DATA 0x30 1371#define IOPB_RES_ADDR_31 0x31 1372#define IOPB_RES_ADDR_32 0x32 1373#define IOPB_SCSI_DATA_HSHK 0x33 1374#define IOPB_SCSI_CTRL 0x34 1375#define IOPB_RES_ADDR_35 0x35 1376#define IOPB_RES_ADDR_36 0x36 1377#define IOPB_RES_ADDR_37 0x37 1378#define IOPB_RAM_BIST 0x38 1379#define IOPB_PLL_TEST 0x39 1380#define IOPB_PCI_INT_CFG 0x3A 1381#define IOPB_RES_ADDR_3B 0x3B 1382#define IOPB_RFIFO_CNT 0x3C 1383#define IOPB_RES_ADDR_3D 0x3D 1384#define IOPB_RES_ADDR_3E 0x3E 1385#define IOPB_RES_ADDR_3F 0x3F 1386 1387/* 1388 * Word I/O register address from base of 'iop_base'. 1389 */ 1390#define IOPW_CHIP_ID_0 0x00 /* CID0 */ 1391#define IOPW_CTRL_REG 0x02 /* CC */ 1392#define IOPW_RAM_ADDR 0x04 /* LA */ 1393#define IOPW_RAM_DATA 0x06 /* LD */ 1394#define IOPW_RES_ADDR_08 0x08 1395#define IOPW_RISC_CSR 0x0A /* CSR */ 1396#define IOPW_SCSI_CFG0 0x0C /* CFG0 */ 1397#define IOPW_SCSI_CFG1 0x0E /* CFG1 */ 1398#define IOPW_RES_ADDR_10 0x10 1399#define IOPW_SEL_MASK 0x12 /* SM */ 1400#define IOPW_RES_ADDR_14 0x14 1401#define IOPW_FLASH_ADDR 0x16 /* FA */ 1402#define IOPW_RES_ADDR_18 0x18 1403#define IOPW_EE_CMD 0x1A /* EC */ 1404#define IOPW_EE_DATA 0x1C /* ED */ 1405#define IOPW_SFIFO_CNT 0x1E /* SFC */ 1406#define IOPW_RES_ADDR_20 0x20 1407#define IOPW_Q_BASE 0x22 /* QB */ 1408#define IOPW_QP 0x24 /* QP */ 1409#define IOPW_IX 0x26 /* IX */ 1410#define IOPW_SP 0x28 /* SP */ 1411#define IOPW_PC 0x2A /* PC */ 1412#define IOPW_RES_ADDR_2C 0x2C 1413#define IOPW_RES_ADDR_2E 0x2E 1414#define IOPW_SCSI_DATA 0x30 /* SD */ 1415#define IOPW_SCSI_DATA_HSHK 0x32 /* SDH */ 1416#define IOPW_SCSI_CTRL 0x34 /* SC */ 1417#define IOPW_HSHK_CFG 0x36 /* HCFG */ 1418#define IOPW_SXFR_STATUS 0x36 /* SXS */ 1419#define IOPW_SXFR_CNTL 0x38 /* SXL */ 1420#define IOPW_SXFR_CNTH 0x3A /* SXH */ 1421#define IOPW_RES_ADDR_3C 0x3C 1422#define IOPW_RFIFO_DATA 0x3E /* RFD */ 1423 1424/* 1425 * Doubleword I/O register address from base of 'iop_base'. 1426 */ 1427#define IOPDW_RES_ADDR_0 0x00 1428#define IOPDW_RAM_DATA 0x04 1429#define IOPDW_RES_ADDR_8 0x08 1430#define IOPDW_RES_ADDR_C 0x0C 1431#define IOPDW_RES_ADDR_10 0x10 1432#define IOPDW_COMMA 0x14 1433#define IOPDW_COMMB 0x18 1434#define IOPDW_RES_ADDR_1C 0x1C 1435#define IOPDW_SDMA_ADDR0 0x20 1436#define IOPDW_SDMA_ADDR1 0x24 1437#define IOPDW_SDMA_COUNT 0x28 1438#define IOPDW_SDMA_ERROR 0x2C 1439#define IOPDW_RDMA_ADDR0 0x30 1440#define IOPDW_RDMA_ADDR1 0x34 1441#define IOPDW_RDMA_COUNT 0x38 1442#define IOPDW_RDMA_ERROR 0x3C 1443 1444#define ADV_CHIP_ID_BYTE 0x25 1445#define ADV_CHIP_ID_WORD 0x04C1 1446 1447#define ADV_INTR_ENABLE_HOST_INTR 0x01 1448#define ADV_INTR_ENABLE_SEL_INTR 0x02 1449#define ADV_INTR_ENABLE_DPR_INTR 0x04 1450#define ADV_INTR_ENABLE_RTA_INTR 0x08 1451#define ADV_INTR_ENABLE_RMA_INTR 0x10 1452#define ADV_INTR_ENABLE_RST_INTR 0x20 1453#define ADV_INTR_ENABLE_DPE_INTR 0x40 1454#define ADV_INTR_ENABLE_GLOBAL_INTR 0x80 1455 1456#define ADV_INTR_STATUS_INTRA 0x01 1457#define ADV_INTR_STATUS_INTRB 0x02 1458#define ADV_INTR_STATUS_INTRC 0x04 1459 1460#define ADV_RISC_CSR_STOP (0x0000) 1461#define ADV_RISC_TEST_COND (0x2000) 1462#define ADV_RISC_CSR_RUN (0x4000) 1463#define ADV_RISC_CSR_SINGLE_STEP (0x8000) 1464 1465#define ADV_CTRL_REG_HOST_INTR 0x0100 1466#define ADV_CTRL_REG_SEL_INTR 0x0200 1467#define ADV_CTRL_REG_DPR_INTR 0x0400 1468#define ADV_CTRL_REG_RTA_INTR 0x0800 1469#define ADV_CTRL_REG_RMA_INTR 0x1000 1470#define ADV_CTRL_REG_RES_BIT14 0x2000 1471#define ADV_CTRL_REG_DPE_INTR 0x4000 1472#define ADV_CTRL_REG_POWER_DONE 0x8000 1473#define ADV_CTRL_REG_ANY_INTR 0xFF00 1474 1475#define ADV_CTRL_REG_CMD_RESET 0x00C6 1476#define ADV_CTRL_REG_CMD_WR_IO_REG 0x00C5 1477#define ADV_CTRL_REG_CMD_RD_IO_REG 0x00C4 1478#define ADV_CTRL_REG_CMD_WR_PCI_CFG_SPACE 0x00C3 1479#define ADV_CTRL_REG_CMD_RD_PCI_CFG_SPACE 0x00C2 1480 1481#define ADV_TICKLE_NOP 0x00 1482#define ADV_TICKLE_A 0x01 1483#define ADV_TICKLE_B 0x02 1484#define ADV_TICKLE_C 0x03 1485 1486#define AdvIsIntPending(port) \ 1487 (AdvReadWordRegister(port, IOPW_CTRL_REG) & ADV_CTRL_REG_HOST_INTR) 1488 1489/* 1490 * SCSI_CFG0 Register bit definitions 1491 */ 1492#define TIMER_MODEAB 0xC000 /* Watchdog, Second, and Select. Timer Ctrl. */ 1493#define PARITY_EN 0x2000 /* Enable SCSI Parity Error detection */ 1494#define EVEN_PARITY 0x1000 /* Select Even Parity */ 1495#define WD_LONG 0x0800 /* Watchdog Interval, 1: 57 min, 0: 13 sec */ 1496#define QUEUE_128 0x0400 /* Queue Size, 1: 128 byte, 0: 64 byte */ 1497#define PRIM_MODE 0x0100 /* Primitive SCSI mode */ 1498#define SCAM_EN 0x0080 /* Enable SCAM selection */ 1499#define SEL_TMO_LONG 0x0040 /* Sel/Resel Timeout, 1: 400 ms, 0: 1.6 ms */ 1500#define CFRM_ID 0x0020 /* SCAM id sel. confirm., 1: fast, 0: 6.4 ms */ 1501#define OUR_ID_EN 0x0010 /* Enable OUR_ID bits */ 1502#define OUR_ID 0x000F /* SCSI ID */ 1503 1504/* 1505 * SCSI_CFG1 Register bit definitions 1506 */ 1507#define BIG_ENDIAN 0x8000 /* Enable Big Endian Mode MIO:15, EEP:15 */ 1508#define TERM_POL 0x2000 /* Terminator Polarity Ctrl. MIO:13, EEP:13 */ 1509#define SLEW_RATE 0x1000 /* SCSI output buffer slew rate */ 1510#define FILTER_SEL 0x0C00 /* Filter Period Selection */ 1511#define FLTR_DISABLE 0x0000 /* Input Filtering Disabled */ 1512#define FLTR_11_TO_20NS 0x0800 /* Input Filtering 11ns to 20ns */ 1513#define FLTR_21_TO_39NS 0x0C00 /* Input Filtering 21ns to 39ns */ 1514#define ACTIVE_DBL 0x0200 /* Disable Active Negation */ 1515#define DIFF_MODE 0x0100 /* SCSI differential Mode (Read-Only) */ 1516#define DIFF_SENSE 0x0080 /* 1: No SE cables, 0: SE cable (Read-Only) */ 1517#define TERM_CTL_SEL 0x0040 /* Enable TERM_CTL_H and TERM_CTL_L */ 1518#define TERM_CTL 0x0030 /* External SCSI Termination Bits */ 1519#define TERM_CTL_H 0x0020 /* Enable External SCSI Upper Termination */ 1520#define TERM_CTL_L 0x0010 /* Enable External SCSI Lower Termination */ 1521#define CABLE_DETECT 0x000F /* External SCSI Cable Connection Status */ 1522 1523/* 1524 * Addendum for ASC-38C0800 Chip 1525 * 1526 * The ASC-38C1600 Chip uses the same definitions except that the 1527 * bus mode override bits [12:10] have been moved to byte register 1528 * offset 0xE (IOPB_SOFT_OVER_WR) bits [12:10]. The [12:10] bits in 1529 * SCSI_CFG1 are read-only and always available. Bit 14 (DIS_TERM_DRV) 1530 * is not needed. The [12:10] bits in IOPB_SOFT_OVER_WR are write-only. 1531 * Also each ASC-38C1600 function or channel uses only cable bits [5:4] 1532 * and [1:0]. Bits [14], [7:6], [3:2] are unused. 1533 */ 1534#define DIS_TERM_DRV 0x4000 /* 1: Read c_det[3:0], 0: cannot read */ 1535#define HVD_LVD_SE 0x1C00 /* Device Detect Bits */ 1536#define HVD 0x1000 /* HVD Device Detect */ 1537#define LVD 0x0800 /* LVD Device Detect */ 1538#define SE 0x0400 /* SE Device Detect */ 1539#define TERM_LVD 0x00C0 /* LVD Termination Bits */ 1540#define TERM_LVD_HI 0x0080 /* Enable LVD Upper Termination */ 1541#define TERM_LVD_LO 0x0040 /* Enable LVD Lower Termination */ 1542#define TERM_SE 0x0030 /* SE Termination Bits */ 1543#define TERM_SE_HI 0x0020 /* Enable SE Upper Termination */ 1544#define TERM_SE_LO 0x0010 /* Enable SE Lower Termination */ 1545#define C_DET_LVD 0x000C /* LVD Cable Detect Bits */ 1546#define C_DET3 0x0008 /* Cable Detect for LVD External Wide */ 1547#define C_DET2 0x0004 /* Cable Detect for LVD Internal Wide */ 1548#define C_DET_SE 0x0003 /* SE Cable Detect Bits */ 1549#define C_DET1 0x0002 /* Cable Detect for SE Internal Wide */ 1550#define C_DET0 0x0001 /* Cable Detect for SE Internal Narrow */ 1551 1552#define CABLE_ILLEGAL_A 0x7 1553 /* x 0 0 0 | on on | Illegal (all 3 connectors are used) */ 1554 1555#define CABLE_ILLEGAL_B 0xB 1556 /* 0 x 0 0 | on on | Illegal (all 3 connectors are used) */ 1557 1558/* 1559 * MEM_CFG Register bit definitions 1560 */ 1561#define BIOS_EN 0x40 /* BIOS Enable MIO:14,EEP:14 */ 1562#define FAST_EE_CLK 0x20 /* Diagnostic Bit */ 1563#define RAM_SZ 0x1C /* Specify size of RAM to RISC */ 1564#define RAM_SZ_2KB 0x00 /* 2 KB */ 1565#define RAM_SZ_4KB 0x04 /* 4 KB */ 1566#define RAM_SZ_8KB 0x08 /* 8 KB */ 1567#define RAM_SZ_16KB 0x0C /* 16 KB */ 1568#define RAM_SZ_32KB 0x10 /* 32 KB */ 1569#define RAM_SZ_64KB 0x14 /* 64 KB */ 1570 1571/* 1572 * DMA_CFG0 Register bit definitions 1573 * 1574 * This register is only accessible to the host. 1575 */ 1576#define BC_THRESH_ENB 0x80 /* PCI DMA Start Conditions */ 1577#define FIFO_THRESH 0x70 /* PCI DMA FIFO Threshold */ 1578#define FIFO_THRESH_16B 0x00 /* 16 bytes */ 1579#define FIFO_THRESH_32B 0x20 /* 32 bytes */ 1580#define FIFO_THRESH_48B 0x30 /* 48 bytes */ 1581#define FIFO_THRESH_64B 0x40 /* 64 bytes */ 1582#define FIFO_THRESH_80B 0x50 /* 80 bytes (default) */ 1583#define FIFO_THRESH_96B 0x60 /* 96 bytes */ 1584#define FIFO_THRESH_112B 0x70 /* 112 bytes */ 1585#define START_CTL 0x0C /* DMA start conditions */ 1586#define START_CTL_TH 0x00 /* Wait threshold level (default) */ 1587#define START_CTL_ID 0x04 /* Wait SDMA/SBUS idle */ 1588#define START_CTL_THID 0x08 /* Wait threshold and SDMA/SBUS idle */ 1589#define START_CTL_EMFU 0x0C /* Wait SDMA FIFO empty/full */ 1590#define READ_CMD 0x03 /* Memory Read Method */ 1591#define READ_CMD_MR 0x00 /* Memory Read */ 1592#define READ_CMD_MRL 0x02 /* Memory Read Long */ 1593#define READ_CMD_MRM 0x03 /* Memory Read Multiple (default) */ 1594 1595/* 1596 * ASC-38C0800 RAM BIST Register bit definitions 1597 */ 1598#define RAM_TEST_MODE 0x80 1599#define PRE_TEST_MODE 0x40 1600#define NORMAL_MODE 0x00 1601#define RAM_TEST_DONE 0x10 1602#define RAM_TEST_STATUS 0x0F 1603#define RAM_TEST_HOST_ERROR 0x08 1604#define RAM_TEST_INTRAM_ERROR 0x04 1605#define RAM_TEST_RISC_ERROR 0x02 1606#define RAM_TEST_SCSI_ERROR 0x01 1607#define RAM_TEST_SUCCESS 0x00 1608#define PRE_TEST_VALUE 0x05 1609#define NORMAL_VALUE 0x00 1610 1611/* 1612 * ASC38C1600 Definitions 1613 * 1614 * IOPB_PCI_INT_CFG Bit Field Definitions 1615 */ 1616 1617#define INTAB_LD 0x80 /* Value loaded from EEPROM Bit 11. */ 1618 1619/* 1620 * Bit 1 can be set to change the interrupt for the Function to operate in 1621 * Totem Pole mode. By default Bit 1 is 0 and the interrupt operates in 1622 * Open Drain mode. Both functions of the ASC38C1600 must be set to the same 1623 * mode, otherwise the operating mode is undefined. 1624 */ 1625#define TOTEMPOLE 0x02 1626 1627/* 1628 * Bit 0 can be used to change the Int Pin for the Function. The value is 1629 * 0 by default for both Functions with Function 0 using INT A and Function 1630 * B using INT B. For Function 0 if set, INT B is used. For Function 1 if set, 1631 * INT A is used. 1632 * 1633 * EEPROM Word 0 Bit 11 for each Function may change the initial Int Pin 1634 * value specified in the PCI Configuration Space. 1635 */ 1636#define INTAB 0x01 1637 1638/* 1639 * Adv Library Status Definitions 1640 */ 1641#define ADV_TRUE 1 1642#define ADV_FALSE 0 1643#define ADV_SUCCESS 1 1644#define ADV_BUSY 0 1645#define ADV_ERROR (-1) 1646 1647/* 1648 * ADV_DVC_VAR 'warn_code' values 1649 */ 1650#define ASC_WARN_BUSRESET_ERROR 0x0001 /* SCSI Bus Reset error */ 1651#define ASC_WARN_EEPROM_CHKSUM 0x0002 /* EEP check sum error */ 1652#define ASC_WARN_EEPROM_TERMINATION 0x0004 /* EEP termination bad field */ 1653#define ASC_WARN_ERROR 0xFFFF /* ADV_ERROR return */ 1654 1655#define ADV_MAX_TID 15 /* max. target identifier */ 1656#define ADV_MAX_LUN 7 /* max. logical unit number */ 1657 1658/* 1659 * Fixed locations of microcode operating variables. 1660 */ 1661#define ASC_MC_CODE_BEGIN_ADDR 0x0028 /* microcode start address */ 1662#define ASC_MC_CODE_END_ADDR 0x002A /* microcode end address */ 1663#define ASC_MC_CODE_CHK_SUM 0x002C /* microcode code checksum */ 1664#define ASC_MC_VERSION_DATE 0x0038 /* microcode version */ 1665#define ASC_MC_VERSION_NUM 0x003A /* microcode number */ 1666#define ASC_MC_BIOSMEM 0x0040 /* BIOS RISC Memory Start */ 1667#define ASC_MC_BIOSLEN 0x0050 /* BIOS RISC Memory Length */ 1668#define ASC_MC_BIOS_SIGNATURE 0x0058 /* BIOS Signature 0x55AA */ 1669#define ASC_MC_BIOS_VERSION 0x005A /* BIOS Version (2 bytes) */ 1670#define ASC_MC_SDTR_SPEED1 0x0090 /* SDTR Speed for TID 0-3 */ 1671#define ASC_MC_SDTR_SPEED2 0x0092 /* SDTR Speed for TID 4-7 */ 1672#define ASC_MC_SDTR_SPEED3 0x0094 /* SDTR Speed for TID 8-11 */ 1673#define ASC_MC_SDTR_SPEED4 0x0096 /* SDTR Speed for TID 12-15 */ 1674#define ASC_MC_CHIP_TYPE 0x009A 1675#define ASC_MC_INTRB_CODE 0x009B 1676#define ASC_MC_WDTR_ABLE 0x009C 1677#define ASC_MC_SDTR_ABLE 0x009E 1678#define ASC_MC_TAGQNG_ABLE 0x00A0 1679#define ASC_MC_DISC_ENABLE 0x00A2 1680#define ASC_MC_IDLE_CMD_STATUS 0x00A4 1681#define ASC_MC_IDLE_CMD 0x00A6 1682#define ASC_MC_IDLE_CMD_PARAMETER 0x00A8 1683#define ASC_MC_DEFAULT_SCSI_CFG0 0x00AC 1684#define ASC_MC_DEFAULT_SCSI_CFG1 0x00AE 1685#define ASC_MC_DEFAULT_MEM_CFG 0x00B0 1686#define ASC_MC_DEFAULT_SEL_MASK 0x00B2 1687#define ASC_MC_SDTR_DONE 0x00B6 1688#define ASC_MC_NUMBER_OF_QUEUED_CMD 0x00C0 1689#define ASC_MC_NUMBER_OF_MAX_CMD 0x00D0 1690#define ASC_MC_DEVICE_HSHK_CFG_TABLE 0x0100 1691#define ASC_MC_CONTROL_FLAG 0x0122 /* Microcode control flag. */ 1692#define ASC_MC_WDTR_DONE 0x0124 1693#define ASC_MC_CAM_MODE_MASK 0x015E /* CAM mode TID bitmask. */ 1694#define ASC_MC_ICQ 0x0160 1695#define ASC_MC_IRQ 0x0164 1696#define ASC_MC_PPR_ABLE 0x017A 1697 1698/* 1699 * BIOS LRAM variable absolute offsets. 1700 */ 1701#define BIOS_CODESEG 0x54 1702#define BIOS_CODELEN 0x56 1703#define BIOS_SIGNATURE 0x58 1704#define BIOS_VERSION 0x5A 1705 1706/* 1707 * Microcode Control Flags 1708 * 1709 * Flags set by the Adv Library in RISC variable 'control_flag' (0x122) 1710 * and handled by the microcode. 1711 */ 1712#define CONTROL_FLAG_IGNORE_PERR 0x0001 /* Ignore DMA Parity Errors */ 1713#define CONTROL_FLAG_ENABLE_AIPP 0x0002 /* Enabled AIPP checking. */ 1714 1715/* 1716 * ASC_MC_DEVICE_HSHK_CFG_TABLE microcode table or HSHK_CFG register format 1717 */ 1718#define HSHK_CFG_WIDE_XFR 0x8000 1719#define HSHK_CFG_RATE 0x0F00 1720#define HSHK_CFG_OFFSET 0x001F 1721 1722#define ASC_DEF_MAX_HOST_QNG 0xFD /* Max. number of host commands (253) */ 1723#define ASC_DEF_MIN_HOST_QNG 0x10 /* Min. number of host commands (16) */ 1724#define ASC_DEF_MAX_DVC_QNG 0x3F /* Max. number commands per device (63) */ 1725#define ASC_DEF_MIN_DVC_QNG 0x04 /* Min. number commands per device (4) */ 1726 1727#define ASC_QC_DATA_CHECK 0x01 /* Require ASC_QC_DATA_OUT set or clear. */ 1728#define ASC_QC_DATA_OUT 0x02 /* Data out DMA transfer. */ 1729#define ASC_QC_START_MOTOR 0x04 /* Send auto-start motor before request. */ 1730#define ASC_QC_NO_OVERRUN 0x08 /* Don't report overrun. */ 1731#define ASC_QC_FREEZE_TIDQ 0x10 /* Freeze TID queue after request. XXX TBD */ 1732 1733#define ASC_QSC_NO_DISC 0x01 /* Don't allow disconnect for request. */ 1734#define ASC_QSC_NO_TAGMSG 0x02 /* Don't allow tag queuing for request. */ 1735#define ASC_QSC_NO_SYNC 0x04 /* Don't use Synch. transfer on request. */ 1736#define ASC_QSC_NO_WIDE 0x08 /* Don't use Wide transfer on request. */ 1737#define ASC_QSC_REDO_DTR 0x10 /* Renegotiate WDTR/SDTR before request. */ 1738/* 1739 * Note: If a Tag Message is to be sent and neither ASC_QSC_HEAD_TAG or 1740 * ASC_QSC_ORDERED_TAG is set, then a Simple Tag Message (0x20) is used. 1741 */ 1742#define ASC_QSC_HEAD_TAG 0x40 /* Use Head Tag Message (0x21). */ 1743#define ASC_QSC_ORDERED_TAG 0x80 /* Use Ordered Tag Message (0x22). */ 1744 1745/* 1746 * All fields here are accessed by the board microcode and need to be 1747 * little-endian. 1748 */ 1749typedef struct adv_carr_t { 1750 ADV_VADDR carr_va; /* Carrier Virtual Address */ 1751 ADV_PADDR carr_pa; /* Carrier Physical Address */ 1752 ADV_VADDR areq_vpa; /* ASC_SCSI_REQ_Q Virtual or Physical Address */ 1753 /* 1754 * next_vpa [31:4] Carrier Virtual or Physical Next Pointer 1755 * 1756 * next_vpa [3:1] Reserved Bits 1757 * next_vpa [0] Done Flag set in Response Queue. 1758 */ 1759 ADV_VADDR next_vpa; 1760} ADV_CARR_T; 1761 1762/* 1763 * Mask used to eliminate low 4 bits of carrier 'next_vpa' field. 1764 */ 1765#define ASC_NEXT_VPA_MASK 0xFFFFFFF0 1766 1767#define ASC_RQ_DONE 0x00000001 1768#define ASC_RQ_GOOD 0x00000002 1769#define ASC_CQ_STOPPER 0x00000000 1770 1771#define ASC_GET_CARRP(carrp) ((carrp) & ASC_NEXT_VPA_MASK) 1772 1773#define ADV_CARRIER_NUM_PAGE_CROSSING \ 1774 (((ADV_CARRIER_COUNT * sizeof(ADV_CARR_T)) + (PAGE_SIZE - 1))/PAGE_SIZE) 1775 1776#define ADV_CARRIER_BUFSIZE \ 1777 ((ADV_CARRIER_COUNT + ADV_CARRIER_NUM_PAGE_CROSSING) * sizeof(ADV_CARR_T)) 1778 1779/* 1780 * ASC_SCSI_REQ_Q 'a_flag' definitions 1781 * 1782 * The Adv Library should limit use to the lower nibble (4 bits) of 1783 * a_flag. Drivers are free to use the upper nibble (4 bits) of a_flag. 1784 */ 1785#define ADV_POLL_REQUEST 0x01 /* poll for request completion */ 1786#define ADV_SCSIQ_DONE 0x02 /* request done */ 1787#define ADV_DONT_RETRY 0x08 /* don't do retry */ 1788 1789#define ADV_CHIP_ASC3550 0x01 /* Ultra-Wide IC */ 1790#define ADV_CHIP_ASC38C0800 0x02 /* Ultra2-Wide/LVD IC */ 1791#define ADV_CHIP_ASC38C1600 0x03 /* Ultra3-Wide/LVD2 IC */ 1792 1793/* 1794 * Adapter temporary configuration structure 1795 * 1796 * This structure can be discarded after initialization. Don't add 1797 * fields here needed after initialization. 1798 * 1799 * Field naming convention: 1800 * 1801 * *_enable indicates the field enables or disables a feature. The 1802 * value of the field is never reset. 1803 */ 1804typedef struct adv_dvc_cfg { 1805 ushort disc_enable; /* enable disconnection */ 1806 uchar chip_version; /* chip version */ 1807 uchar termination; /* Term. Ctrl. bits 6-5 of SCSI_CFG1 register */ 1808 ushort control_flag; /* Microcode Control Flag */ 1809 ushort mcode_date; /* Microcode date */ 1810 ushort mcode_version; /* Microcode version */ 1811 ushort serial1; /* EEPROM serial number word 1 */ 1812 ushort serial2; /* EEPROM serial number word 2 */ 1813 ushort serial3; /* EEPROM serial number word 3 */ 1814} ADV_DVC_CFG; 1815 1816struct adv_dvc_var; 1817struct adv_scsi_req_q; 1818 1819typedef struct asc_sg_block { 1820 uchar reserved1; 1821 uchar reserved2; 1822 uchar reserved3; 1823 uchar sg_cnt; /* Valid entries in block. */ 1824 ADV_PADDR sg_ptr; /* Pointer to next sg block. */ 1825 struct { 1826 ADV_PADDR sg_addr; /* SG element address. */ 1827 ADV_DCNT sg_count; /* SG element count. */ 1828 } sg_list[NO_OF_SG_PER_BLOCK]; 1829} ADV_SG_BLOCK; 1830 1831/* 1832 * ADV_SCSI_REQ_Q - microcode request structure 1833 * 1834 * All fields in this structure up to byte 60 are used by the microcode. 1835 * The microcode makes assumptions about the size and ordering of fields 1836 * in this structure. Do not change the structure definition here without 1837 * coordinating the change with the microcode. 1838 * 1839 * All fields accessed by microcode must be maintained in little_endian 1840 * order. 1841 */ 1842typedef struct adv_scsi_req_q { 1843 uchar cntl; /* Ucode flags and state (ASC_MC_QC_*). */ 1844 uchar target_cmd; 1845 uchar target_id; /* Device target identifier. */ 1846 uchar target_lun; /* Device target logical unit number. */ 1847 ADV_PADDR data_addr; /* Data buffer physical address. */ 1848 ADV_DCNT data_cnt; /* Data count. Ucode sets to residual. */ 1849 ADV_PADDR sense_addr; 1850 ADV_PADDR carr_pa; 1851 uchar mflag; 1852 uchar sense_len; 1853 uchar cdb_len; /* SCSI CDB length. Must <= 16 bytes. */ 1854 uchar scsi_cntl; 1855 uchar done_status; /* Completion status. */ 1856 uchar scsi_status; /* SCSI status byte. */ 1857 uchar host_status; /* Ucode host status. */ 1858 uchar sg_working_ix; 1859 uchar cdb[12]; /* SCSI CDB bytes 0-11. */ 1860 ADV_PADDR sg_real_addr; /* SG list physical address. */ 1861 ADV_PADDR scsiq_rptr; 1862 uchar cdb16[4]; /* SCSI CDB bytes 12-15. */ 1863 ADV_VADDR scsiq_ptr; 1864 ADV_VADDR carr_va; 1865 /* 1866 * End of microcode structure - 60 bytes. The rest of the structure 1867 * is used by the Adv Library and ignored by the microcode. 1868 */ 1869 ADV_VADDR srb_ptr; 1870 ADV_SG_BLOCK *sg_list_ptr; /* SG list virtual address. */ 1871 char *vdata_addr; /* Data buffer virtual address. */ 1872 uchar a_flag; 1873 uchar pad[2]; /* Pad out to a word boundary. */ 1874} ADV_SCSI_REQ_Q; 1875 1876/* 1877 * The following two structures are used to process Wide Board requests. 1878 * 1879 * The ADV_SCSI_REQ_Q structure in adv_req_t is passed to the Adv Library 1880 * and microcode with the ADV_SCSI_REQ_Q field 'srb_ptr' pointing to the 1881 * adv_req_t. The adv_req_t structure 'cmndp' field in turn points to the 1882 * Mid-Level SCSI request structure. 1883 * 1884 * Zero or more ADV_SG_BLOCK are used with each ADV_SCSI_REQ_Q. Each 1885 * ADV_SG_BLOCK structure holds 15 scatter-gather elements. Under Linux 1886 * up to 255 scatter-gather elements may be used per request or 1887 * ADV_SCSI_REQ_Q. 1888 * 1889 * Both structures must be 32 byte aligned. 1890 */ 1891typedef struct adv_sgblk { 1892 ADV_SG_BLOCK sg_block; /* Sgblock structure. */ 1893 uchar align[32]; /* Sgblock structure padding. */ 1894 struct adv_sgblk *next_sgblkp; /* Next scatter-gather structure. */ 1895} adv_sgblk_t; 1896 1897typedef struct adv_req { 1898 ADV_SCSI_REQ_Q scsi_req_q; /* Adv Library request structure. */ 1899 uchar align[32]; /* Request structure padding. */ 1900 struct scsi_cmnd *cmndp; /* Mid-Level SCSI command pointer. */ 1901 adv_sgblk_t *sgblkp; /* Adv Library scatter-gather pointer. */ 1902 struct adv_req *next_reqp; /* Next Request Structure. */ 1903} adv_req_t; 1904 1905/* 1906 * Adapter operation variable structure. 1907 * 1908 * One structure is required per host adapter. 1909 * 1910 * Field naming convention: 1911 * 1912 * *_able indicates both whether a feature should be enabled or disabled 1913 * and whether a device isi capable of the feature. At initialization 1914 * this field may be set, but later if a device is found to be incapable 1915 * of the feature, the field is cleared. 1916 */ 1917typedef struct adv_dvc_var { 1918 AdvPortAddr iop_base; /* I/O port address */ 1919 ushort err_code; /* fatal error code */ 1920 ushort bios_ctrl; /* BIOS control word, EEPROM word 12 */ 1921 ushort wdtr_able; /* try WDTR for a device */ 1922 ushort sdtr_able; /* try SDTR for a device */ 1923 ushort ultra_able; /* try SDTR Ultra speed for a device */ 1924 ushort sdtr_speed1; /* EEPROM SDTR Speed for TID 0-3 */ 1925 ushort sdtr_speed2; /* EEPROM SDTR Speed for TID 4-7 */ 1926 ushort sdtr_speed3; /* EEPROM SDTR Speed for TID 8-11 */ 1927 ushort sdtr_speed4; /* EEPROM SDTR Speed for TID 12-15 */ 1928 ushort tagqng_able; /* try tagged queuing with a device */ 1929 ushort ppr_able; /* PPR message capable per TID bitmask. */ 1930 uchar max_dvc_qng; /* maximum number of tagged commands per device */ 1931 ushort start_motor; /* start motor command allowed */ 1932 uchar scsi_reset_wait; /* delay in seconds after scsi bus reset */ 1933 uchar chip_no; /* should be assigned by caller */ 1934 uchar max_host_qng; /* maximum number of Q'ed command allowed */ 1935 ushort no_scam; /* scam_tolerant of EEPROM */ 1936 struct asc_board *drv_ptr; /* driver pointer to private structure */ 1937 uchar chip_scsi_id; /* chip SCSI target ID */ 1938 uchar chip_type; 1939 uchar bist_err_code; 1940 ADV_CARR_T *carrier_buf; 1941 ADV_CARR_T *carr_freelist; /* Carrier free list. */ 1942 ADV_CARR_T *icq_sp; /* Initiator command queue stopper pointer. */ 1943 ADV_CARR_T *irq_sp; /* Initiator response queue stopper pointer. */ 1944 ushort carr_pending_cnt; /* Count of pending carriers. */ 1945 struct adv_req *orig_reqp; /* adv_req_t memory block. */ 1946 /* 1947 * Note: The following fields will not be used after initialization. The 1948 * driver may discard the buffer after initialization is done. 1949 */ 1950 ADV_DVC_CFG *cfg; /* temporary configuration structure */ 1951} ADV_DVC_VAR; 1952 1953/* 1954 * Microcode idle loop commands 1955 */ 1956#define IDLE_CMD_COMPLETED 0 1957#define IDLE_CMD_STOP_CHIP 0x0001 1958#define IDLE_CMD_STOP_CHIP_SEND_INT 0x0002 1959#define IDLE_CMD_SEND_INT 0x0004 1960#define IDLE_CMD_ABORT 0x0008 1961#define IDLE_CMD_DEVICE_RESET 0x0010 1962#define IDLE_CMD_SCSI_RESET_START 0x0020 /* Assert SCSI Bus Reset */ 1963#define IDLE_CMD_SCSI_RESET_END 0x0040 /* Deassert SCSI Bus Reset */ 1964#define IDLE_CMD_SCSIREQ 0x0080 1965 1966#define IDLE_CMD_STATUS_SUCCESS 0x0001 1967#define IDLE_CMD_STATUS_FAILURE 0x0002 1968 1969/* 1970 * AdvSendIdleCmd() flag definitions. 1971 */ 1972#define ADV_NOWAIT 0x01 1973 1974/* 1975 * Wait loop time out values. 1976 */ 1977#define SCSI_WAIT_100_MSEC 100UL /* 100 milliseconds */ 1978#define SCSI_US_PER_MSEC 1000 /* microseconds per millisecond */ 1979#define SCSI_MAX_RETRY 10 /* retry count */ 1980 1981#define ADV_ASYNC_RDMA_FAILURE 0x01 /* Fatal RDMA failure. */ 1982#define ADV_ASYNC_SCSI_BUS_RESET_DET 0x02 /* Detected SCSI Bus Reset. */ 1983#define ADV_ASYNC_CARRIER_READY_FAILURE 0x03 /* Carrier Ready failure. */ 1984#define ADV_RDMA_IN_CARR_AND_Q_INVALID 0x04 /* RDMAed-in data invalid. */ 1985 1986#define ADV_HOST_SCSI_BUS_RESET 0x80 /* Host Initiated SCSI Bus Reset. */ 1987 1988/* Read byte from a register. */ 1989#define AdvReadByteRegister(iop_base, reg_off) \ 1990 (ADV_MEM_READB((iop_base) + (reg_off))) 1991 1992/* Write byte to a register. */ 1993#define AdvWriteByteRegister(iop_base, reg_off, byte) \ 1994 (ADV_MEM_WRITEB((iop_base) + (reg_off), (byte))) 1995 1996/* Read word (2 bytes) from a register. */ 1997#define AdvReadWordRegister(iop_base, reg_off) \ 1998 (ADV_MEM_READW((iop_base) + (reg_off))) 1999 2000/* Write word (2 bytes) to a register. */ 2001#define AdvWriteWordRegister(iop_base, reg_off, word) \ 2002 (ADV_MEM_WRITEW((iop_base) + (reg_off), (word))) 2003 2004/* Write dword (4 bytes) to a register. */ 2005#define AdvWriteDWordRegister(iop_base, reg_off, dword) \ 2006 (ADV_MEM_WRITEDW((iop_base) + (reg_off), (dword))) 2007 2008/* Read byte from LRAM. */ 2009#define AdvReadByteLram(iop_base, addr, byte) \ 2010do { \ 2011 ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)); \ 2012 (byte) = ADV_MEM_READB((iop_base) + IOPB_RAM_DATA); \ 2013} while (0) 2014 2015/* Write byte to LRAM. */ 2016#define AdvWriteByteLram(iop_base, addr, byte) \ 2017 (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \ 2018 ADV_MEM_WRITEB((iop_base) + IOPB_RAM_DATA, (byte))) 2019 2020/* Read word (2 bytes) from LRAM. */ 2021#define AdvReadWordLram(iop_base, addr, word) \ 2022do { \ 2023 ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)); \ 2024 (word) = (ADV_MEM_READW((iop_base) + IOPW_RAM_DATA)); \ 2025} while (0) 2026 2027/* Write word (2 bytes) to LRAM. */ 2028#define AdvWriteWordLram(iop_base, addr, word) \ 2029 (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \ 2030 ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word))) 2031 2032/* Write little-endian double word (4 bytes) to LRAM */ 2033/* Because of unspecified C language ordering don't use auto-increment. */ 2034#define AdvWriteDWordLramNoSwap(iop_base, addr, dword) \ 2035 ((ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \ 2036 ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \ 2037 cpu_to_le16((ushort) ((dword) & 0xFFFF)))), \ 2038 (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr) + 2), \ 2039 ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \ 2040 cpu_to_le16((ushort) ((dword >> 16) & 0xFFFF))))) 2041 2042/* Read word (2 bytes) from LRAM assuming that the address is already set. */ 2043#define AdvReadWordAutoIncLram(iop_base) \ 2044 (ADV_MEM_READW((iop_base) + IOPW_RAM_DATA)) 2045 2046/* Write word (2 bytes) to LRAM assuming that the address is already set. */ 2047#define AdvWriteWordAutoIncLram(iop_base, word) \ 2048 (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word))) 2049 2050/* 2051 * Define macro to check for Condor signature. 2052 * 2053 * Evaluate to ADV_TRUE if a Condor chip is found the specified port 2054 * address 'iop_base'. Otherwise evalue to ADV_FALSE. 2055 */ 2056#define AdvFindSignature(iop_base) \ 2057 (((AdvReadByteRegister((iop_base), IOPB_CHIP_ID_1) == \ 2058 ADV_CHIP_ID_BYTE) && \ 2059 (AdvReadWordRegister((iop_base), IOPW_CHIP_ID_0) == \ 2060 ADV_CHIP_ID_WORD)) ? ADV_TRUE : ADV_FALSE) 2061 2062/* 2063 * Define macro to Return the version number of the chip at 'iop_base'. 2064 * 2065 * The second parameter 'bus_type' is currently unused. 2066 */ 2067#define AdvGetChipVersion(iop_base, bus_type) \ 2068 AdvReadByteRegister((iop_base), IOPB_CHIP_TYPE_REV) 2069 2070/* 2071 * Abort an SRB in the chip's RISC Memory. The 'srb_ptr' argument must 2072 * match the ASC_SCSI_REQ_Q 'srb_ptr' field. 2073 * 2074 * If the request has not yet been sent to the device it will simply be 2075 * aborted from RISC memory. If the request is disconnected it will be 2076 * aborted on reselection by sending an Abort Message to the target ID. 2077 * 2078 * Return value: 2079 * ADV_TRUE(1) - Queue was successfully aborted. 2080 * ADV_FALSE(0) - Queue was not found on the active queue list. 2081 */ 2082#define AdvAbortQueue(asc_dvc, scsiq) \ 2083 AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_ABORT, \ 2084 (ADV_DCNT) (scsiq)) 2085 2086/* 2087 * Send a Bus Device Reset Message to the specified target ID. 2088 * 2089 * All outstanding commands will be purged if sending the 2090 * Bus Device Reset Message is successful. 2091 * 2092 * Return Value: 2093 * ADV_TRUE(1) - All requests on the target are purged. 2094 * ADV_FALSE(0) - Couldn't issue Bus Device Reset Message; Requests 2095 * are not purged. 2096 */ 2097#define AdvResetDevice(asc_dvc, target_id) \ 2098 AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_DEVICE_RESET, \ 2099 (ADV_DCNT) (target_id)) 2100 2101/* 2102 * SCSI Wide Type definition. 2103 */ 2104#define ADV_SCSI_BIT_ID_TYPE ushort 2105 2106/* 2107 * AdvInitScsiTarget() 'cntl_flag' options. 2108 */ 2109#define ADV_SCAN_LUN 0x01 2110#define ADV_CAPINFO_NOLUN 0x02 2111 2112/* 2113 * Convert target id to target id bit mask. 2114 */ 2115#define ADV_TID_TO_TIDMASK(tid) (0x01 << ((tid) & ADV_MAX_TID)) 2116 2117/* 2118 * ASC_SCSI_REQ_Q 'done_status' and 'host_status' return values. 2119 */ 2120 2121#define QD_NO_STATUS 0x00 /* Request not completed yet. */ 2122#define QD_NO_ERROR 0x01 2123#define QD_ABORTED_BY_HOST 0x02 2124#define QD_WITH_ERROR 0x04 2125 2126#define QHSTA_NO_ERROR 0x00 2127#define QHSTA_M_SEL_TIMEOUT 0x11 2128#define QHSTA_M_DATA_OVER_RUN 0x12 2129#define QHSTA_M_UNEXPECTED_BUS_FREE 0x13 2130#define QHSTA_M_QUEUE_ABORTED 0x15 2131#define QHSTA_M_SXFR_SDMA_ERR 0x16 /* SXFR_STATUS SCSI DMA Error */ 2132#define QHSTA_M_SXFR_SXFR_PERR 0x17 /* SXFR_STATUS SCSI Bus Parity Error */ 2133#define QHSTA_M_RDMA_PERR 0x18 /* RISC PCI DMA parity error */ 2134#define QHSTA_M_SXFR_OFF_UFLW 0x19 /* SXFR_STATUS Offset Underflow */ 2135#define QHSTA_M_SXFR_OFF_OFLW 0x20 /* SXFR_STATUS Offset Overflow */ 2136#define QHSTA_M_SXFR_WD_TMO 0x21 /* SXFR_STATUS Watchdog Timeout */ 2137#define QHSTA_M_SXFR_DESELECTED 0x22 /* SXFR_STATUS Deselected */ 2138/* Note: QHSTA_M_SXFR_XFR_OFLW is identical to QHSTA_M_DATA_OVER_RUN. */ 2139#define QHSTA_M_SXFR_XFR_OFLW 0x12 /* SXFR_STATUS Transfer Overflow */ 2140#define QHSTA_M_SXFR_XFR_PH_ERR 0x24 /* SXFR_STATUS Transfer Phase Error */ 2141#define QHSTA_M_SXFR_UNKNOWN_ERROR 0x25 /* SXFR_STATUS Unknown Error */ 2142#define QHSTA_M_SCSI_BUS_RESET 0x30 /* Request aborted from SBR */ 2143#define QHSTA_M_SCSI_BUS_RESET_UNSOL 0x31 /* Request aborted from unsol. SBR */ 2144#define QHSTA_M_BUS_DEVICE_RESET 0x32 /* Request aborted from BDR */ 2145#define QHSTA_M_DIRECTION_ERR 0x35 /* Data Phase mismatch */ 2146#define QHSTA_M_DIRECTION_ERR_HUNG 0x36 /* Data Phase mismatch and bus hang */ 2147#define QHSTA_M_WTM_TIMEOUT 0x41 2148#define QHSTA_M_BAD_CMPL_STATUS_IN 0x42 2149#define QHSTA_M_NO_AUTO_REQ_SENSE 0x43 2150#define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44 2151#define QHSTA_M_INVALID_DEVICE 0x45 /* Bad target ID */ 2152#define QHSTA_M_FROZEN_TIDQ 0x46 /* TID Queue frozen. */ 2153#define QHSTA_M_SGBACKUP_ERROR 0x47 /* Scatter-Gather backup error */ 2154 2155/* Return the address that is aligned at the next doubleword >= to 'addr'. */ 2156#define ADV_8BALIGN(addr) (((ulong) (addr) + 0x7) & ~0x7) 2157#define ADV_16BALIGN(addr) (((ulong) (addr) + 0xF) & ~0xF) 2158#define ADV_32BALIGN(addr) (((ulong) (addr) + 0x1F) & ~0x1F) 2159 2160/* 2161 * Total contiguous memory needed for driver SG blocks. 2162 * 2163 * ADV_MAX_SG_LIST must be defined by a driver. It is the maximum 2164 * number of scatter-gather elements the driver supports in a 2165 * single request. 2166 */ 2167 2168#define ADV_SG_LIST_MAX_BYTE_SIZE \ 2169 (sizeof(ADV_SG_BLOCK) * \ 2170 ((ADV_MAX_SG_LIST + (NO_OF_SG_PER_BLOCK - 1))/NO_OF_SG_PER_BLOCK)) 2171 2172/* struct asc_board flags */ 2173#define ASC_IS_WIDE_BOARD 0x04 /* AdvanSys Wide Board */ 2174 2175#define ASC_NARROW_BOARD(boardp) (((boardp)->flags & ASC_IS_WIDE_BOARD) == 0) 2176 2177#define NO_ISA_DMA 0xff /* No ISA DMA Channel Used */ 2178 2179#define ASC_INFO_SIZE 128 /* advansys_info() line size */ 2180 2181/* Asc Library return codes */ 2182#define ASC_TRUE 1 2183#define ASC_FALSE 0 2184#define ASC_NOERROR 1 2185#define ASC_BUSY 0 2186#define ASC_ERROR (-1) 2187 2188/* struct scsi_cmnd function return codes */ 2189#define STATUS_BYTE(byte) (byte) 2190#define MSG_BYTE(byte) ((byte) << 8) 2191#define HOST_BYTE(byte) ((byte) << 16) 2192#define DRIVER_BYTE(byte) ((byte) << 24) 2193 2194#define ASC_STATS(shost, counter) ASC_STATS_ADD(shost, counter, 1) 2195#ifndef ADVANSYS_STATS 2196#define ASC_STATS_ADD(shost, counter, count) 2197#else /* ADVANSYS_STATS */ 2198#define ASC_STATS_ADD(shost, counter, count) \ 2199 (((struct asc_board *) shost_priv(shost))->asc_stats.counter += (count)) 2200#endif /* ADVANSYS_STATS */ 2201 2202/* If the result wraps when calculating tenths, return 0. */ 2203#define ASC_TENTHS(num, den) \ 2204 (((10 * ((num)/(den))) > (((num) * 10)/(den))) ? \ 2205 0 : ((((num) * 10)/(den)) - (10 * ((num)/(den))))) 2206 2207/* 2208 * Display a message to the console. 2209 */ 2210#define ASC_PRINT(s) \ 2211 { \ 2212 printk("advansys: "); \ 2213 printk(s); \ 2214 } 2215 2216#define ASC_PRINT1(s, a1) \ 2217 { \ 2218 printk("advansys: "); \ 2219 printk((s), (a1)); \ 2220 } 2221 2222#define ASC_PRINT2(s, a1, a2) \ 2223 { \ 2224 printk("advansys: "); \ 2225 printk((s), (a1), (a2)); \ 2226 } 2227 2228#define ASC_PRINT3(s, a1, a2, a3) \ 2229 { \ 2230 printk("advansys: "); \ 2231 printk((s), (a1), (a2), (a3)); \ 2232 } 2233 2234#define ASC_PRINT4(s, a1, a2, a3, a4) \ 2235 { \ 2236 printk("advansys: "); \ 2237 printk((s), (a1), (a2), (a3), (a4)); \ 2238 } 2239 2240#ifndef ADVANSYS_DEBUG 2241 2242#define ASC_DBG(lvl, s...) 2243#define ASC_DBG_PRT_SCSI_HOST(lvl, s) 2244#define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp) 2245#define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) 2246#define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone) 2247#define ADV_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) 2248#define ASC_DBG_PRT_HEX(lvl, name, start, length) 2249#define ASC_DBG_PRT_CDB(lvl, cdb, len) 2250#define ASC_DBG_PRT_SENSE(lvl, sense, len) 2251#define ASC_DBG_PRT_INQUIRY(lvl, inq, len) 2252 2253#else /* ADVANSYS_DEBUG */ 2254 2255/* 2256 * Debugging Message Levels: 2257 * 0: Errors Only 2258 * 1: High-Level Tracing 2259 * 2-N: Verbose Tracing 2260 */ 2261 2262#define ASC_DBG(lvl, format, arg...) { \ 2263 if (asc_dbglvl >= (lvl)) \ 2264 printk(KERN_DEBUG "%s: %s: " format, DRV_NAME, \ 2265 __func__ , ## arg); \ 2266} 2267 2268#define ASC_DBG_PRT_SCSI_HOST(lvl, s) \ 2269 { \ 2270 if (asc_dbglvl >= (lvl)) { \ 2271 asc_prt_scsi_host(s); \ 2272 } \ 2273 } 2274 2275#define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp) \ 2276 { \ 2277 if (asc_dbglvl >= (lvl)) { \ 2278 asc_prt_asc_scsi_q(scsiqp); \ 2279 } \ 2280 } 2281 2282#define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone) \ 2283 { \ 2284 if (asc_dbglvl >= (lvl)) { \ 2285 asc_prt_asc_qdone_info(qdone); \ 2286 } \ 2287 } 2288 2289#define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) \ 2290 { \ 2291 if (asc_dbglvl >= (lvl)) { \ 2292 asc_prt_adv_scsi_req_q(scsiqp); \ 2293 } \ 2294 } 2295 2296#define ASC_DBG_PRT_HEX(lvl, name, start, length) \ 2297 { \ 2298 if (asc_dbglvl >= (lvl)) { \ 2299 asc_prt_hex((name), (start), (length)); \ 2300 } \ 2301 } 2302 2303#define ASC_DBG_PRT_CDB(lvl, cdb, len) \ 2304 ASC_DBG_PRT_HEX((lvl), "CDB", (uchar *) (cdb), (len)); 2305 2306#define ASC_DBG_PRT_SENSE(lvl, sense, len) \ 2307 ASC_DBG_PRT_HEX((lvl), "SENSE", (uchar *) (sense), (len)); 2308 2309#define ASC_DBG_PRT_INQUIRY(lvl, inq, len) \ 2310 ASC_DBG_PRT_HEX((lvl), "INQUIRY", (uchar *) (inq), (len)); 2311#endif /* ADVANSYS_DEBUG */ 2312 2313#ifdef ADVANSYS_STATS 2314 2315/* Per board statistics structure */ 2316struct asc_stats { 2317 /* Driver Entrypoint Statistics */ 2318 ADV_DCNT queuecommand; /* # calls to advansys_queuecommand() */ 2319 ADV_DCNT reset; /* # calls to advansys_eh_bus_reset() */ 2320 ADV_DCNT biosparam; /* # calls to advansys_biosparam() */ 2321 ADV_DCNT interrupt; /* # advansys_interrupt() calls */ 2322 ADV_DCNT callback; /* # calls to asc/adv_isr_callback() */ 2323 ADV_DCNT done; /* # calls to request's scsi_done function */ 2324 ADV_DCNT build_error; /* # asc/adv_build_req() ASC_ERROR returns. */ 2325 ADV_DCNT adv_build_noreq; /* # adv_build_req() adv_req_t alloc. fail. */ 2326 ADV_DCNT adv_build_nosg; /* # adv_build_req() adv_sgblk_t alloc. fail. */ 2327 /* AscExeScsiQueue()/AdvExeScsiQueue() Statistics */ 2328 ADV_DCNT exe_noerror; /* # ASC_NOERROR returns. */ 2329 ADV_DCNT exe_busy; /* # ASC_BUSY returns. */ 2330 ADV_DCNT exe_error; /* # ASC_ERROR returns. */ 2331 ADV_DCNT exe_unknown; /* # unknown returns. */ 2332 /* Data Transfer Statistics */ 2333 ADV_DCNT xfer_cnt; /* # I/O requests received */ 2334 ADV_DCNT xfer_elem; /* # scatter-gather elements */ 2335 ADV_DCNT xfer_sect; /* # 512-byte blocks */ 2336}; 2337#endif /* ADVANSYS_STATS */ 2338 2339/* 2340 * Structure allocated for each board. 2341 * 2342 * This structure is allocated by scsi_host_alloc() at the end 2343 * of the 'Scsi_Host' structure starting at the 'hostdata' 2344 * field. It is guaranteed to be allocated from DMA-able memory. 2345 */ 2346struct asc_board { 2347 struct device *dev; 2348 uint flags; /* Board flags */ 2349 unsigned int irq; 2350 union { 2351 ASC_DVC_VAR asc_dvc_var; /* Narrow board */ 2352 ADV_DVC_VAR adv_dvc_var; /* Wide board */ 2353 } dvc_var; 2354 union { 2355 ASC_DVC_CFG asc_dvc_cfg; /* Narrow board */ 2356 ADV_DVC_CFG adv_dvc_cfg; /* Wide board */ 2357 } dvc_cfg; 2358 ushort asc_n_io_port; /* Number I/O ports. */ 2359 ADV_SCSI_BIT_ID_TYPE init_tidmask; /* Target init./valid mask */ 2360 ushort reqcnt[ADV_MAX_TID + 1]; /* Starvation request count */ 2361 ADV_SCSI_BIT_ID_TYPE queue_full; /* Queue full mask */ 2362 ushort queue_full_cnt[ADV_MAX_TID + 1]; /* Queue full count */ 2363 union { 2364 ASCEEP_CONFIG asc_eep; /* Narrow EEPROM config. */ 2365 ADVEEP_3550_CONFIG adv_3550_eep; /* 3550 EEPROM config. */ 2366 ADVEEP_38C0800_CONFIG adv_38C0800_eep; /* 38C0800 EEPROM config. */ 2367 ADVEEP_38C1600_CONFIG adv_38C1600_eep; /* 38C1600 EEPROM config. */ 2368 } eep_config; 2369 ulong last_reset; /* Saved last reset time */ 2370 /* /proc/scsi/advansys/[0...] */ 2371#ifdef ADVANSYS_STATS 2372 struct asc_stats asc_stats; /* Board statistics */ 2373#endif /* ADVANSYS_STATS */ 2374 /* 2375 * The following fields are used only for Narrow Boards. 2376 */ 2377 uchar sdtr_data[ASC_MAX_TID + 1]; /* SDTR information */ 2378 /* 2379 * The following fields are used only for Wide Boards. 2380 */ 2381 void __iomem *ioremap_addr; /* I/O Memory remap address. */ 2382 ushort ioport; /* I/O Port address. */ 2383 adv_req_t *adv_reqp; /* Request structures. */ 2384 adv_sgblk_t *adv_sgblkp; /* Scatter-gather structures. */ 2385 ushort bios_signature; /* BIOS Signature. */ 2386 ushort bios_version; /* BIOS Version. */ 2387 ushort bios_codeseg; /* BIOS Code Segment. */ 2388 ushort bios_codelen; /* BIOS Code Segment Length. */ 2389}; 2390 2391#define asc_dvc_to_board(asc_dvc) container_of(asc_dvc, struct asc_board, \ 2392 dvc_var.asc_dvc_var) 2393#define adv_dvc_to_board(adv_dvc) container_of(adv_dvc, struct asc_board, \ 2394 dvc_var.adv_dvc_var) 2395#define adv_dvc_to_pdev(adv_dvc) to_pci_dev(adv_dvc_to_board(adv_dvc)->dev) 2396 2397#ifdef ADVANSYS_DEBUG 2398static int asc_dbglvl = 3; 2399 2400/* 2401 * asc_prt_asc_dvc_var() 2402 */ 2403static void asc_prt_asc_dvc_var(ASC_DVC_VAR *h) 2404{ 2405 printk("ASC_DVC_VAR at addr 0x%lx\n", (ulong)h); 2406 2407 printk(" iop_base 0x%x, err_code 0x%x, dvc_cntl 0x%x, bug_fix_cntl " 2408 "%d,\n", h->iop_base, h->err_code, h->dvc_cntl, h->bug_fix_cntl); 2409 2410 printk(" bus_type %d, init_sdtr 0x%x,\n", h->bus_type, 2411 (unsigned)h->init_sdtr); 2412 2413 printk(" sdtr_done 0x%x, use_tagged_qng 0x%x, unit_not_ready 0x%x, " 2414 "chip_no 0x%x,\n", (unsigned)h->sdtr_done, 2415 (unsigned)h->use_tagged_qng, (unsigned)h->unit_not_ready, 2416 (unsigned)h->chip_no); 2417 2418 printk(" queue_full_or_busy 0x%x, start_motor 0x%x, scsi_reset_wait " 2419 "%u,\n", (unsigned)h->queue_full_or_busy, 2420 (unsigned)h->start_motor, (unsigned)h->scsi_reset_wait); 2421 2422 printk(" is_in_int %u, max_total_qng %u, cur_total_qng %u, " 2423 "in_critical_cnt %u,\n", (unsigned)h->is_in_int, 2424 (unsigned)h->max_total_qng, (unsigned)h->cur_total_qng, 2425 (unsigned)h->in_critical_cnt); 2426 2427 printk(" last_q_shortage %u, init_state 0x%x, no_scam 0x%x, " 2428 "pci_fix_asyn_xfer 0x%x,\n", (unsigned)h->last_q_shortage, 2429 (unsigned)h->init_state, (unsigned)h->no_scam, 2430 (unsigned)h->pci_fix_asyn_xfer); 2431 2432 printk(" cfg 0x%lx\n", (ulong)h->cfg); 2433} 2434 2435/* 2436 * asc_prt_asc_dvc_cfg() 2437 */ 2438static void asc_prt_asc_dvc_cfg(ASC_DVC_CFG *h) 2439{ 2440 printk("ASC_DVC_CFG at addr 0x%lx\n", (ulong)h); 2441 2442 printk(" can_tagged_qng 0x%x, cmd_qng_enabled 0x%x,\n", 2443 h->can_tagged_qng, h->cmd_qng_enabled); 2444 printk(" disc_enable 0x%x, sdtr_enable 0x%x,\n", 2445 h->disc_enable, h->sdtr_enable); 2446 2447 printk(" chip_scsi_id %d, isa_dma_speed %d, isa_dma_channel %d, " 2448 "chip_version %d,\n", h->chip_scsi_id, h->isa_dma_speed, 2449 h->isa_dma_channel, h->chip_version); 2450 2451 printk(" mcode_date 0x%x, mcode_version %d\n", 2452 h->mcode_date, h->mcode_version); 2453} 2454 2455/* 2456 * asc_prt_adv_dvc_var() 2457 * 2458 * Display an ADV_DVC_VAR structure. 2459 */ 2460static void asc_prt_adv_dvc_var(ADV_DVC_VAR *h) 2461{ 2462 printk(" ADV_DVC_VAR at addr 0x%lx\n", (ulong)h); 2463 2464 printk(" iop_base 0x%lx, err_code 0x%x, ultra_able 0x%x\n", 2465 (ulong)h->iop_base, h->err_code, (unsigned)h->ultra_able); 2466 2467 printk(" sdtr_able 0x%x, wdtr_able 0x%x\n", 2468 (unsigned)h->sdtr_able, (unsigned)h->wdtr_able); 2469 2470 printk(" start_motor 0x%x, scsi_reset_wait 0x%x\n", 2471 (unsigned)h->start_motor, (unsigned)h->scsi_reset_wait); 2472 2473 printk(" max_host_qng %u, max_dvc_qng %u, carr_freelist 0x%lxn\n", 2474 (unsigned)h->max_host_qng, (unsigned)h->max_dvc_qng, 2475 (ulong)h->carr_freelist); 2476 2477 printk(" icq_sp 0x%lx, irq_sp 0x%lx\n", 2478 (ulong)h->icq_sp, (ulong)h->irq_sp); 2479 2480 printk(" no_scam 0x%x, tagqng_able 0x%x\n", 2481 (unsigned)h->no_scam, (unsigned)h->tagqng_able); 2482 2483 printk(" chip_scsi_id 0x%x, cfg 0x%lx\n", 2484 (unsigned)h->chip_scsi_id, (ulong)h->cfg); 2485} 2486 2487/* 2488 * asc_prt_adv_dvc_cfg() 2489 * 2490 * Display an ADV_DVC_CFG structure. 2491 */ 2492static void asc_prt_adv_dvc_cfg(ADV_DVC_CFG *h) 2493{ 2494 printk(" ADV_DVC_CFG at addr 0x%lx\n", (ulong)h); 2495 2496 printk(" disc_enable 0x%x, termination 0x%x\n", 2497 h->disc_enable, h->termination); 2498 2499 printk(" chip_version 0x%x, mcode_date 0x%x\n", 2500 h->chip_version, h->mcode_date); 2501 2502 printk(" mcode_version 0x%x, control_flag 0x%x\n", 2503 h->mcode_version, h->control_flag); 2504} 2505 2506/* 2507 * asc_prt_scsi_host() 2508 */ 2509static void asc_prt_scsi_host(struct Scsi_Host *s) 2510{ 2511 struct asc_board *boardp = shost_priv(s); 2512 2513 printk("Scsi_Host at addr 0x%p, device %s\n", s, dev_name(boardp->dev)); 2514 printk(" host_busy %u, host_no %d,\n", 2515 atomic_read(&s->host_busy), s->host_no); 2516 2517 printk(" base 0x%lx, io_port 0x%lx, irq %d,\n", 2518 (ulong)s->base, (ulong)s->io_port, boardp->irq); 2519 2520 printk(" dma_channel %d, this_id %d, can_queue %d,\n", 2521 s->dma_channel, s->this_id, s->can_queue); 2522 2523 printk(" cmd_per_lun %d, sg_tablesize %d, unchecked_isa_dma %d\n", 2524 s->cmd_per_lun, s->sg_tablesize, s->unchecked_isa_dma); 2525 2526 if (ASC_NARROW_BOARD(boardp)) { 2527 asc_prt_asc_dvc_var(&boardp->dvc_var.asc_dvc_var); 2528 asc_prt_asc_dvc_cfg(&boardp->dvc_cfg.asc_dvc_cfg); 2529 } else { 2530 asc_prt_adv_dvc_var(&boardp->dvc_var.adv_dvc_var); 2531 asc_prt_adv_dvc_cfg(&boardp->dvc_cfg.adv_dvc_cfg); 2532 } 2533} 2534 2535/* 2536 * asc_prt_hex() 2537 * 2538 * Print hexadecimal output in 4 byte groupings 32 bytes 2539 * or 8 double-words per line. 2540 */ 2541static void asc_prt_hex(char *f, uchar *s, int l) 2542{ 2543 int i; 2544 int j; 2545 int k; 2546 int m; 2547 2548 printk("%s: (%d bytes)\n", f, l); 2549 2550 for (i = 0; i < l; i += 32) { 2551 2552 /* Display a maximum of 8 double-words per line. */ 2553 if ((k = (l - i) / 4) >= 8) { 2554 k = 8; 2555 m = 0; 2556 } else { 2557 m = (l - i) % 4; 2558 } 2559 2560 for (j = 0; j < k; j++) { 2561 printk(" %2.2X%2.2X%2.2X%2.2X", 2562 (unsigned)s[i + (j * 4)], 2563 (unsigned)s[i + (j * 4) + 1], 2564 (unsigned)s[i + (j * 4) + 2], 2565 (unsigned)s[i + (j * 4) + 3]); 2566 } 2567 2568 switch (m) { 2569 case 0: 2570 default: 2571 break; 2572 case 1: 2573 printk(" %2.2X", (unsigned)s[i + (j * 4)]); 2574 break; 2575 case 2: 2576 printk(" %2.2X%2.2X", 2577 (unsigned)s[i + (j * 4)], 2578 (unsigned)s[i + (j * 4) + 1]); 2579 break; 2580 case 3: 2581 printk(" %2.2X%2.2X%2.2X", 2582 (unsigned)s[i + (j * 4) + 1], 2583 (unsigned)s[i + (j * 4) + 2], 2584 (unsigned)s[i + (j * 4) + 3]); 2585 break; 2586 } 2587 2588 printk("\n"); 2589 } 2590} 2591 2592/* 2593 * asc_prt_asc_scsi_q() 2594 */ 2595static void asc_prt_asc_scsi_q(ASC_SCSI_Q *q) 2596{ 2597 ASC_SG_HEAD *sgp; 2598 int i; 2599 2600 printk("ASC_SCSI_Q at addr 0x%lx\n", (ulong)q); 2601 2602 printk 2603 (" target_ix 0x%x, target_lun %u, srb_ptr 0x%lx, tag_code 0x%x,\n", 2604 q->q2.target_ix, q->q1.target_lun, (ulong)q->q2.srb_ptr, 2605 q->q2.tag_code); 2606 2607 printk 2608 (" data_addr 0x%lx, data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n", 2609 (ulong)le32_to_cpu(q->q1.data_addr), 2610 (ulong)le32_to_cpu(q->q1.data_cnt), 2611 (ulong)le32_to_cpu(q->q1.sense_addr), q->q1.sense_len); 2612 2613 printk(" cdbptr 0x%lx, cdb_len %u, sg_head 0x%lx, sg_queue_cnt %u\n", 2614 (ulong)q->cdbptr, q->q2.cdb_len, 2615 (ulong)q->sg_head, q->q1.sg_queue_cnt); 2616 2617 if (q->sg_head) { 2618 sgp = q->sg_head; 2619 printk("ASC_SG_HEAD at addr 0x%lx\n", (ulong)sgp); 2620 printk(" entry_cnt %u, queue_cnt %u\n", sgp->entry_cnt, 2621 sgp->queue_cnt); 2622 for (i = 0; i < sgp->entry_cnt; i++) { 2623 printk(" [%u]: addr 0x%lx, bytes %lu\n", 2624 i, (ulong)le32_to_cpu(sgp->sg_list[i].addr), 2625 (ulong)le32_to_cpu(sgp->sg_list[i].bytes)); 2626 } 2627 2628 } 2629} 2630 2631/* 2632 * asc_prt_asc_qdone_info() 2633 */ 2634static void asc_prt_asc_qdone_info(ASC_QDONE_INFO *q) 2635{ 2636 printk("ASC_QDONE_INFO at addr 0x%lx\n", (ulong)q); 2637 printk(" srb_ptr 0x%lx, target_ix %u, cdb_len %u, tag_code %u,\n", 2638 (ulong)q->d2.srb_ptr, q->d2.target_ix, q->d2.cdb_len, 2639 q->d2.tag_code); 2640 printk 2641 (" done_stat 0x%x, host_stat 0x%x, scsi_stat 0x%x, scsi_msg 0x%x\n", 2642 q->d3.done_stat, q->d3.host_stat, q->d3.scsi_stat, q->d3.scsi_msg); 2643} 2644 2645/* 2646 * asc_prt_adv_sgblock() 2647 * 2648 * Display an ADV_SG_BLOCK structure. 2649 */ 2650static void asc_prt_adv_sgblock(int sgblockno, ADV_SG_BLOCK *b) 2651{ 2652 int i; 2653 2654 printk(" ASC_SG_BLOCK at addr 0x%lx (sgblockno %d)\n", 2655 (ulong)b, sgblockno); 2656 printk(" sg_cnt %u, sg_ptr 0x%lx\n", 2657 b->sg_cnt, (ulong)le32_to_cpu(b->sg_ptr)); 2658 BUG_ON(b->sg_cnt > NO_OF_SG_PER_BLOCK); 2659 if (b->sg_ptr != 0) 2660 BUG_ON(b->sg_cnt != NO_OF_SG_PER_BLOCK); 2661 for (i = 0; i < b->sg_cnt; i++) { 2662 printk(" [%u]: sg_addr 0x%lx, sg_count 0x%lx\n", 2663 i, (ulong)b->sg_list[i].sg_addr, 2664 (ulong)b->sg_list[i].sg_count); 2665 } 2666} 2667 2668/* 2669 * asc_prt_adv_scsi_req_q() 2670 * 2671 * Display an ADV_SCSI_REQ_Q structure. 2672 */ 2673static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q) 2674{ 2675 int sg_blk_cnt; 2676 struct asc_sg_block *sg_ptr; 2677 2678 printk("ADV_SCSI_REQ_Q at addr 0x%lx\n", (ulong)q); 2679 2680 printk(" target_id %u, target_lun %u, srb_ptr 0x%lx, a_flag 0x%x\n", 2681 q->target_id, q->target_lun, (ulong)q->srb_ptr, q->a_flag); 2682 2683 printk(" cntl 0x%x, data_addr 0x%lx, vdata_addr 0x%lx\n", 2684 q->cntl, (ulong)le32_to_cpu(q->data_addr), (ulong)q->vdata_addr); 2685 2686 printk(" data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n", 2687 (ulong)le32_to_cpu(q->data_cnt), 2688 (ulong)le32_to_cpu(q->sense_addr), q->sense_len); 2689 2690 printk 2691 (" cdb_len %u, done_status 0x%x, host_status 0x%x, scsi_status 0x%x\n", 2692 q->cdb_len, q->done_status, q->host_status, q->scsi_status); 2693 2694 printk(" sg_working_ix 0x%x, target_cmd %u\n", 2695 q->sg_working_ix, q->target_cmd); 2696 2697 printk(" scsiq_rptr 0x%lx, sg_real_addr 0x%lx, sg_list_ptr 0x%lx\n", 2698 (ulong)le32_to_cpu(q->scsiq_rptr), 2699 (ulong)le32_to_cpu(q->sg_real_addr), (ulong)q->sg_list_ptr); 2700 2701 /* Display the request's ADV_SG_BLOCK structures. */ 2702 if (q->sg_list_ptr != NULL) { 2703 sg_blk_cnt = 0; 2704 while (1) { 2705 /* 2706 * 'sg_ptr' is a physical address. Convert it to a virtual 2707 * address by indexing 'sg_blk_cnt' into the virtual address 2708 * array 'sg_list_ptr'. 2709 * 2710 * XXX - Assumes all SG physical blocks are virtually contiguous. 2711 */ 2712 sg_ptr = 2713 &(((ADV_SG_BLOCK *)(q->sg_list_ptr))[sg_blk_cnt]); 2714 asc_prt_adv_sgblock(sg_blk_cnt, sg_ptr); 2715 if (sg_ptr->sg_ptr == 0) { 2716 break; 2717 } 2718 sg_blk_cnt++; 2719 } 2720 } 2721} 2722#endif /* ADVANSYS_DEBUG */ 2723 2724/* 2725 * The advansys chip/microcode contains a 32-bit identifier for each command 2726 * known as the 'srb'. I don't know what it stands for. The driver used 2727 * to encode the scsi_cmnd pointer by calling virt_to_bus and retrieve it 2728 * with bus_to_virt. Now the driver keeps a per-host map of integers to 2729 * pointers. It auto-expands when full, unless it can't allocate memory. 2730 * Note that an srb of 0 is treated specially by the chip/firmware, hence 2731 * the return of i+1 in this routine, and the corresponding subtraction in 2732 * the inverse routine. 2733 */ 2734#define BAD_SRB 0 2735static u32 advansys_ptr_to_srb(struct asc_dvc_var *asc_dvc, void *ptr) 2736{ 2737 int i; 2738 void **new_ptr; 2739 2740 for (i = 0; i < asc_dvc->ptr_map_count; i++) { 2741 if (!asc_dvc->ptr_map[i]) 2742 goto out; 2743 } 2744 2745 if (asc_dvc->ptr_map_count == 0) 2746 asc_dvc->ptr_map_count = 1; 2747 else 2748 asc_dvc->ptr_map_count *= 2; 2749 2750 new_ptr = krealloc(asc_dvc->ptr_map, 2751 asc_dvc->ptr_map_count * sizeof(void *), GFP_ATOMIC); 2752 if (!new_ptr) 2753 return BAD_SRB; 2754 asc_dvc->ptr_map = new_ptr; 2755 out: 2756 ASC_DBG(3, "Putting ptr %p into array offset %d\n", ptr, i); 2757 asc_dvc->ptr_map[i] = ptr; 2758 return i + 1; 2759} 2760 2761static void * advansys_srb_to_ptr(struct asc_dvc_var *asc_dvc, u32 srb) 2762{ 2763 void *ptr; 2764 2765 srb--; 2766 if (srb >= asc_dvc->ptr_map_count) { 2767 printk("advansys: bad SRB %u, max %u\n", srb, 2768 asc_dvc->ptr_map_count); 2769 return NULL; 2770 } 2771 ptr = asc_dvc->ptr_map[srb]; 2772 asc_dvc->ptr_map[srb] = NULL; 2773 ASC_DBG(3, "Returning ptr %p from array offset %d\n", ptr, srb); 2774 return ptr; 2775} 2776 2777/* 2778 * advansys_info() 2779 * 2780 * Return suitable for printing on the console with the argument 2781 * adapter's configuration information. 2782 * 2783 * Note: The information line should not exceed ASC_INFO_SIZE bytes, 2784 * otherwise the static 'info' array will be overrun. 2785 */ 2786static const char *advansys_info(struct Scsi_Host *shost) 2787{ 2788 static char info[ASC_INFO_SIZE]; 2789 struct asc_board *boardp = shost_priv(shost); 2790 ASC_DVC_VAR *asc_dvc_varp; 2791 ADV_DVC_VAR *adv_dvc_varp; 2792 char *busname; 2793 char *widename = NULL; 2794 2795 if (ASC_NARROW_BOARD(boardp)) { 2796 asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; 2797 ASC_DBG(1, "begin\n"); 2798 if (asc_dvc_varp->bus_type & ASC_IS_ISA) { 2799 if ((asc_dvc_varp->bus_type & ASC_IS_ISAPNP) == 2800 ASC_IS_ISAPNP) { 2801 busname = "ISA PnP"; 2802 } else { 2803 busname = "ISA"; 2804 } 2805 sprintf(info, 2806 "AdvanSys SCSI %s: %s: IO 0x%lX-0x%lX, IRQ 0x%X, DMA 0x%X", 2807 ASC_VERSION, busname, 2808 (ulong)shost->io_port, 2809 (ulong)shost->io_port + ASC_IOADR_GAP - 1, 2810 boardp->irq, shost->dma_channel); 2811 } else { 2812 if (asc_dvc_varp->bus_type & ASC_IS_VL) { 2813 busname = "VL"; 2814 } else if (asc_dvc_varp->bus_type & ASC_IS_EISA) { 2815 busname = "EISA"; 2816 } else if (asc_dvc_varp->bus_type & ASC_IS_PCI) { 2817 if ((asc_dvc_varp->bus_type & ASC_IS_PCI_ULTRA) 2818 == ASC_IS_PCI_ULTRA) { 2819 busname = "PCI Ultra"; 2820 } else { 2821 busname = "PCI"; 2822 } 2823 } else { 2824 busname = "?"; 2825 shost_printk(KERN_ERR, shost, "unknown bus " 2826 "type %d\n", asc_dvc_varp->bus_type); 2827 } 2828 sprintf(info, 2829 "AdvanSys SCSI %s: %s: IO 0x%lX-0x%lX, IRQ 0x%X", 2830 ASC_VERSION, busname, (ulong)shost->io_port, 2831 (ulong)shost->io_port + ASC_IOADR_GAP - 1, 2832 boardp->irq); 2833 } 2834 } else { 2835 /* 2836 * Wide Adapter Information 2837 * 2838 * Memory-mapped I/O is used instead of I/O space to access 2839 * the adapter, but display the I/O Port range. The Memory 2840 * I/O address is displayed through the driver /proc file. 2841 */ 2842 adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; 2843 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { 2844 widename = "Ultra-Wide"; 2845 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { 2846 widename = "Ultra2-Wide"; 2847 } else { 2848 widename = "Ultra3-Wide"; 2849 } 2850 sprintf(info, 2851 "AdvanSys SCSI %s: PCI %s: PCIMEM 0x%lX-0x%lX, IRQ 0x%X", 2852 ASC_VERSION, widename, (ulong)adv_dvc_varp->iop_base, 2853 (ulong)adv_dvc_varp->iop_base + boardp->asc_n_io_port - 1, boardp->irq); 2854 } 2855 BUG_ON(strlen(info) >= ASC_INFO_SIZE); 2856 ASC_DBG(1, "end\n"); 2857 return info; 2858} 2859 2860#ifdef CONFIG_PROC_FS 2861 2862/* 2863 * asc_prt_board_devices() 2864 * 2865 * Print driver information for devices attached to the board. 2866 */ 2867static void asc_prt_board_devices(struct seq_file *m, struct Scsi_Host *shost) 2868{ 2869 struct asc_board *boardp = shost_priv(shost); 2870 int chip_scsi_id; 2871 int i; 2872 2873 seq_printf(m, 2874 "\nDevice Information for AdvanSys SCSI Host %d:\n", 2875 shost->host_no); 2876 2877 if (ASC_NARROW_BOARD(boardp)) { 2878 chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id; 2879 } else { 2880 chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id; 2881 } 2882 2883 seq_puts(m, "Target IDs Detected:"); 2884 for (i = 0; i <= ADV_MAX_TID; i++) { 2885 if (boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) 2886 seq_printf(m, " %X,", i); 2887 } 2888 seq_printf(m, " (%X=Host Adapter)\n", chip_scsi_id); 2889} 2890 2891/* 2892 * Display Wide Board BIOS Information. 2893 */ 2894static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost) 2895{ 2896 struct asc_board *boardp = shost_priv(shost); 2897 ushort major, minor, letter; 2898 2899 seq_puts(m, "\nROM BIOS Version: "); 2900 2901 /* 2902 * If the BIOS saved a valid signature, then fill in 2903 * the BIOS code segment base address. 2904 */ 2905 if (boardp->bios_signature != 0x55AA) { 2906 seq_puts(m, "Disabled or Pre-3.1\n" 2907 "BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n" 2908 "can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n"); 2909 } else { 2910 major = (boardp->bios_version >> 12) & 0xF; 2911 minor = (boardp->bios_version >> 8) & 0xF; 2912 letter = (boardp->bios_version & 0xFF); 2913 2914 seq_printf(m, "%d.%d%c\n", 2915 major, minor, 2916 letter >= 26 ? '?' : letter + 'A'); 2917 /* 2918 * Current available ROM BIOS release is 3.1I for UW 2919 * and 3.2I for U2W. This code doesn't differentiate 2920 * UW and U2W boards. 2921 */ 2922 if (major < 3 || (major <= 3 && minor < 1) || 2923 (major <= 3 && minor <= 1 && letter < ('I' - 'A'))) { 2924 seq_puts(m, "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n" 2925 "ftp://ftp.connectcom.net/pub\n"); 2926 } 2927 } 2928} 2929 2930/* 2931 * Add serial number to information bar if signature AAh 2932 * is found in at bit 15-9 (7 bits) of word 1. 2933 * 2934 * Serial Number consists fo 12 alpha-numeric digits. 2935 * 2936 * 1 - Product type (A,B,C,D..) Word0: 15-13 (3 bits) 2937 * 2 - MFG Location (A,B,C,D..) Word0: 12-10 (3 bits) 2938 * 3-4 - Product ID (0-99) Word0: 9-0 (10 bits) 2939 * 5 - Product revision (A-J) Word0: " " 2940 * 2941 * Signature Word1: 15-9 (7 bits) 2942 * 6 - Year (0-9) Word1: 8-6 (3 bits) & Word2: 15 (1 bit) 2943 * 7-8 - Week of the year (1-52) Word1: 5-0 (6 bits) 2944 * 2945 * 9-12 - Serial Number (A001-Z999) Word2: 14-0 (15 bits) 2946 * 2947 * Note 1: Only production cards will have a serial number. 2948 * 2949 * Note 2: Signature is most significant 7 bits (0xFE). 2950 * 2951 * Returns ASC_TRUE if serial number found, otherwise returns ASC_FALSE. 2952 */ 2953static int asc_get_eeprom_string(ushort *serialnum, uchar *cp) 2954{ 2955 ushort w, num; 2956 2957 if ((serialnum[1] & 0xFE00) != ((ushort)0xAA << 8)) { 2958 return ASC_FALSE; 2959 } else { 2960 /* 2961 * First word - 6 digits. 2962 */ 2963 w = serialnum[0]; 2964 2965 /* Product type - 1st digit. */ 2966 if ((*cp = 'A' + ((w & 0xE000) >> 13)) == 'H') { 2967 /* Product type is P=Prototype */ 2968 *cp += 0x8; 2969 } 2970 cp++; 2971 2972 /* Manufacturing location - 2nd digit. */ 2973 *cp++ = 'A' + ((w & 0x1C00) >> 10); 2974 2975 /* Product ID - 3rd, 4th digits. */ 2976 num = w & 0x3FF; 2977 *cp++ = '0' + (num / 100); 2978 num %= 100; 2979 *cp++ = '0' + (num / 10); 2980 2981 /* Product revision - 5th digit. */ 2982 *cp++ = 'A' + (num % 10); 2983 2984 /* 2985 * Second word 2986 */ 2987 w = serialnum[1]; 2988 2989 /* 2990 * Year - 6th digit. 2991 * 2992 * If bit 15 of third word is set, then the 2993 * last digit of the year is greater than 7. 2994 */ 2995 if (serialnum[2] & 0x8000) { 2996 *cp++ = '8' + ((w & 0x1C0) >> 6); 2997 } else { 2998 *cp++ = '0' + ((w & 0x1C0) >> 6); 2999 } 3000 3001 /* Week of year - 7th, 8th digits. */ 3002 num = w & 0x003F; 3003 *cp++ = '0' + num / 10; 3004 num %= 10; 3005 *cp++ = '0' + num; 3006 3007 /* 3008 * Third word 3009 */ 3010 w = serialnum[2] & 0x7FFF; 3011 3012 /* Serial number - 9th digit. */ 3013 *cp++ = 'A' + (w / 1000); 3014 3015 /* 10th, 11th, 12th digits. */ 3016 num = w % 1000; 3017 *cp++ = '0' + num / 100; 3018 num %= 100; 3019 *cp++ = '0' + num / 10; 3020 num %= 10; 3021 *cp++ = '0' + num; 3022 3023 *cp = '\0'; /* Null Terminate the string. */ 3024 return ASC_TRUE; 3025 } 3026} 3027 3028/* 3029 * asc_prt_asc_board_eeprom() 3030 * 3031 * Print board EEPROM configuration. 3032 */ 3033static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost) 3034{ 3035 struct asc_board *boardp = shost_priv(shost); 3036 ASC_DVC_VAR *asc_dvc_varp; 3037 ASCEEP_CONFIG *ep; 3038 int i; 3039#ifdef CONFIG_ISA 3040 int isa_dma_speed[] = { 10, 8, 7, 6, 5, 4, 3, 2 }; 3041#endif /* CONFIG_ISA */ 3042 uchar serialstr[13]; 3043 3044 asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; 3045 ep = &boardp->eep_config.asc_eep; 3046 3047 seq_printf(m, 3048 "\nEEPROM Settings for AdvanSys SCSI Host %d:\n", 3049 shost->host_no); 3050 3051 if (asc_get_eeprom_string((ushort *)&ep->adapter_info[0], serialstr) 3052 == ASC_TRUE) 3053 seq_printf(m, " Serial Number: %s\n", serialstr); 3054 else if (ep->adapter_info[5] == 0xBB) 3055 seq_puts(m, 3056 " Default Settings Used for EEPROM-less Adapter.\n"); 3057 else 3058 seq_puts(m, " Serial Number Signature Not Present.\n"); 3059 3060 seq_printf(m, 3061 " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", 3062 ASC_EEP_GET_CHIP_ID(ep), ep->max_total_qng, 3063 ep->max_tag_qng); 3064 3065 seq_printf(m, 3066 " cntl 0x%x, no_scam 0x%x\n", ep->cntl, ep->no_scam); 3067 3068 seq_puts(m, " Target ID: "); 3069 for (i = 0; i <= ASC_MAX_TID; i++) 3070 seq_printf(m, " %d", i); 3071 3072 seq_puts(m, "\n Disconnects: "); 3073 for (i = 0; i <= ASC_MAX_TID; i++) 3074 seq_printf(m, " %c", 3075 (ep->disc_enable & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3076 3077 seq_puts(m, "\n Command Queuing: "); 3078 for (i = 0; i <= ASC_MAX_TID; i++) 3079 seq_printf(m, " %c", 3080 (ep->use_cmd_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3081 3082 seq_puts(m, "\n Start Motor: "); 3083 for (i = 0; i <= ASC_MAX_TID; i++) 3084 seq_printf(m, " %c", 3085 (ep->start_motor & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3086 3087 seq_puts(m, "\n Synchronous Transfer:"); 3088 for (i = 0; i <= ASC_MAX_TID; i++) 3089 seq_printf(m, " %c", 3090 (ep->init_sdtr & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3091 seq_putc(m, '\n'); 3092 3093#ifdef CONFIG_ISA 3094 if (asc_dvc_varp->bus_type & ASC_IS_ISA) { 3095 seq_printf(m, 3096 " Host ISA DMA speed: %d MB/S\n", 3097 isa_dma_speed[ASC_EEP_GET_DMA_SPD(ep)]); 3098 } 3099#endif /* CONFIG_ISA */ 3100} 3101 3102/* 3103 * asc_prt_adv_board_eeprom() 3104 * 3105 * Print board EEPROM configuration. 3106 */ 3107static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost) 3108{ 3109 struct asc_board *boardp = shost_priv(shost); 3110 ADV_DVC_VAR *adv_dvc_varp; 3111 int i; 3112 char *termstr; 3113 uchar serialstr[13]; 3114 ADVEEP_3550_CONFIG *ep_3550 = NULL; 3115 ADVEEP_38C0800_CONFIG *ep_38C0800 = NULL; 3116 ADVEEP_38C1600_CONFIG *ep_38C1600 = NULL; 3117 ushort word; 3118 ushort *wordp; 3119 ushort sdtr_speed = 0; 3120 3121 adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; 3122 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { 3123 ep_3550 = &boardp->eep_config.adv_3550_eep; 3124 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { 3125 ep_38C0800 = &boardp->eep_config.adv_38C0800_eep; 3126 } else { 3127 ep_38C1600 = &boardp->eep_config.adv_38C1600_eep; 3128 } 3129 3130 seq_printf(m, 3131 "\nEEPROM Settings for AdvanSys SCSI Host %d:\n", 3132 shost->host_no); 3133 3134 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { 3135 wordp = &ep_3550->serial_number_word1; 3136 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { 3137 wordp = &ep_38C0800->serial_number_word1; 3138 } else { 3139 wordp = &ep_38C1600->serial_number_word1; 3140 } 3141 3142 if (asc_get_eeprom_string(wordp, serialstr) == ASC_TRUE) 3143 seq_printf(m, " Serial Number: %s\n", serialstr); 3144 else 3145 seq_puts(m, " Serial Number Signature Not Present.\n"); 3146 3147 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) 3148 seq_printf(m, 3149 " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", 3150 ep_3550->adapter_scsi_id, 3151 ep_3550->max_host_qng, ep_3550->max_dvc_qng); 3152 else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) 3153 seq_printf(m, 3154 " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", 3155 ep_38C0800->adapter_scsi_id, 3156 ep_38C0800->max_host_qng, 3157 ep_38C0800->max_dvc_qng); 3158 else 3159 seq_printf(m, 3160 " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", 3161 ep_38C1600->adapter_scsi_id, 3162 ep_38C1600->max_host_qng, 3163 ep_38C1600->max_dvc_qng); 3164 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { 3165 word = ep_3550->termination; 3166 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { 3167 word = ep_38C0800->termination_lvd; 3168 } else { 3169 word = ep_38C1600->termination_lvd; 3170 } 3171 switch (word) { 3172 case 1: 3173 termstr = "Low Off/High Off"; 3174 break; 3175 case 2: 3176 termstr = "Low Off/High On"; 3177 break; 3178 case 3: 3179 termstr = "Low On/High On"; 3180 break; 3181 default: 3182 case 0: 3183 termstr = "Automatic"; 3184 break; 3185 } 3186 3187 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) 3188 seq_printf(m, 3189 " termination: %u (%s), bios_ctrl: 0x%x\n", 3190 ep_3550->termination, termstr, 3191 ep_3550->bios_ctrl); 3192 else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) 3193 seq_printf(m, 3194 " termination: %u (%s), bios_ctrl: 0x%x\n", 3195 ep_38C0800->termination_lvd, termstr, 3196 ep_38C0800->bios_ctrl); 3197 else 3198 seq_printf(m, 3199 " termination: %u (%s), bios_ctrl: 0x%x\n", 3200 ep_38C1600->termination_lvd, termstr, 3201 ep_38C1600->bios_ctrl); 3202 3203 seq_puts(m, " Target ID: "); 3204 for (i = 0; i <= ADV_MAX_TID; i++) 3205 seq_printf(m, " %X", i); 3206 seq_putc(m, '\n'); 3207 3208 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { 3209 word = ep_3550->disc_enable; 3210 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { 3211 word = ep_38C0800->disc_enable; 3212 } else { 3213 word = ep_38C1600->disc_enable; 3214 } 3215 seq_puts(m, " Disconnects: "); 3216 for (i = 0; i <= ADV_MAX_TID; i++) 3217 seq_printf(m, " %c", 3218 (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3219 seq_putc(m, '\n'); 3220 3221 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { 3222 word = ep_3550->tagqng_able; 3223 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { 3224 word = ep_38C0800->tagqng_able; 3225 } else { 3226 word = ep_38C1600->tagqng_able; 3227 } 3228 seq_puts(m, " Command Queuing: "); 3229 for (i = 0; i <= ADV_MAX_TID; i++) 3230 seq_printf(m, " %c", 3231 (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3232 seq_putc(m, '\n'); 3233 3234 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { 3235 word = ep_3550->start_motor; 3236 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { 3237 word = ep_38C0800->start_motor; 3238 } else { 3239 word = ep_38C1600->start_motor; 3240 } 3241 seq_puts(m, " Start Motor: "); 3242 for (i = 0; i <= ADV_MAX_TID; i++) 3243 seq_printf(m, " %c", 3244 (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3245 seq_putc(m, '\n'); 3246 3247 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { 3248 seq_puts(m, " Synchronous Transfer:"); 3249 for (i = 0; i <= ADV_MAX_TID; i++) 3250 seq_printf(m, " %c", 3251 (ep_3550->sdtr_able & ADV_TID_TO_TIDMASK(i)) ? 3252 'Y' : 'N'); 3253 seq_putc(m, '\n'); 3254 } 3255 3256 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { 3257 seq_puts(m, " Ultra Transfer: "); 3258 for (i = 0; i <= ADV_MAX_TID; i++) 3259 seq_printf(m, " %c", 3260 (ep_3550->ultra_able & ADV_TID_TO_TIDMASK(i)) 3261 ? 'Y' : 'N'); 3262 seq_putc(m, '\n'); 3263 } 3264 3265 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { 3266 word = ep_3550->wdtr_able; 3267 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { 3268 word = ep_38C0800->wdtr_able; 3269 } else { 3270 word = ep_38C1600->wdtr_able; 3271 } 3272 seq_puts(m, " Wide Transfer: "); 3273 for (i = 0; i <= ADV_MAX_TID; i++) 3274 seq_printf(m, " %c", 3275 (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3276 seq_putc(m, '\n'); 3277 3278 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800 || 3279 adv_dvc_varp->chip_type == ADV_CHIP_ASC38C1600) { 3280 seq_puts(m, " Synchronous Transfer Speed (Mhz):\n "); 3281 for (i = 0; i <= ADV_MAX_TID; i++) { 3282 char *speed_str; 3283 3284 if (i == 0) { 3285 sdtr_speed = adv_dvc_varp->sdtr_speed1; 3286 } else if (i == 4) { 3287 sdtr_speed = adv_dvc_varp->sdtr_speed2; 3288 } else if (i == 8) { 3289 sdtr_speed = adv_dvc_varp->sdtr_speed3; 3290 } else if (i == 12) { 3291 sdtr_speed = adv_dvc_varp->sdtr_speed4; 3292 } 3293 switch (sdtr_speed & ADV_MAX_TID) { 3294 case 0: 3295 speed_str = "Off"; 3296 break; 3297 case 1: 3298 speed_str = " 5"; 3299 break; 3300 case 2: 3301 speed_str = " 10"; 3302 break; 3303 case 3: 3304 speed_str = " 20"; 3305 break; 3306 case 4: 3307 speed_str = " 40"; 3308 break; 3309 case 5: 3310 speed_str = " 80"; 3311 break; 3312 default: 3313 speed_str = "Unk"; 3314 break; 3315 } 3316 seq_printf(m, "%X:%s ", i, speed_str); 3317 if (i == 7) 3318 seq_puts(m, "\n "); 3319 sdtr_speed >>= 4; 3320 } 3321 seq_putc(m, '\n'); 3322 } 3323} 3324 3325/* 3326 * asc_prt_driver_conf() 3327 */ 3328static void asc_prt_driver_conf(struct seq_file *m, struct Scsi_Host *shost) 3329{ 3330 struct asc_board *boardp = shost_priv(shost); 3331 int chip_scsi_id; 3332 3333 seq_printf(m, 3334 "\nLinux Driver Configuration and Information for AdvanSys SCSI Host %d:\n", 3335 shost->host_no); 3336 3337 seq_printf(m, 3338 " host_busy %u, max_id %u, max_lun %llu, max_channel %u\n", 3339 atomic_read(&shost->host_busy), shost->max_id, 3340 shost->max_lun, shost->max_channel); 3341 3342 seq_printf(m, 3343 " unique_id %d, can_queue %d, this_id %d, sg_tablesize %u, cmd_per_lun %u\n", 3344 shost->unique_id, shost->can_queue, shost->this_id, 3345 shost->sg_tablesize, shost->cmd_per_lun); 3346 3347 seq_printf(m, 3348 " unchecked_isa_dma %d, use_clustering %d\n", 3349 shost->unchecked_isa_dma, shost->use_clustering); 3350 3351 seq_printf(m, 3352 " flags 0x%x, last_reset 0x%lx, jiffies 0x%lx, asc_n_io_port 0x%x\n", 3353 boardp->flags, boardp->last_reset, jiffies, 3354 boardp->asc_n_io_port); 3355 3356 seq_printf(m, " io_port 0x%lx\n", shost->io_port); 3357 3358 if (ASC_NARROW_BOARD(boardp)) { 3359 chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id; 3360 } else { 3361 chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id; 3362 } 3363} 3364 3365/* 3366 * asc_prt_asc_board_info() 3367 * 3368 * Print dynamic board configuration information. 3369 */ 3370static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost) 3371{ 3372 struct asc_board *boardp = shost_priv(shost); 3373 int chip_scsi_id; 3374 ASC_DVC_VAR *v; 3375 ASC_DVC_CFG *c; 3376 int i; 3377 int renegotiate = 0; 3378 3379 v = &boardp->dvc_var.asc_dvc_var; 3380 c = &boardp->dvc_cfg.asc_dvc_cfg; 3381 chip_scsi_id = c->chip_scsi_id; 3382 3383 seq_printf(m, 3384 "\nAsc Library Configuration and Statistics for AdvanSys SCSI Host %d:\n", 3385 shost->host_no); 3386 3387 seq_printf(m, " chip_version %u, mcode_date 0x%x, " 3388 "mcode_version 0x%x, err_code %u\n", 3389 c->chip_version, c->mcode_date, c->mcode_version, 3390 v->err_code); 3391 3392 /* Current number of commands waiting for the host. */ 3393 seq_printf(m, 3394 " Total Command Pending: %d\n", v->cur_total_qng); 3395 3396 seq_puts(m, " Command Queuing:"); 3397 for (i = 0; i <= ASC_MAX_TID; i++) { 3398 if ((chip_scsi_id == i) || 3399 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { 3400 continue; 3401 } 3402 seq_printf(m, " %X:%c", 3403 i, 3404 (v->use_tagged_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3405 } 3406 3407 /* Current number of commands waiting for a device. */ 3408 seq_puts(m, "\n Command Queue Pending:"); 3409 for (i = 0; i <= ASC_MAX_TID; i++) { 3410 if ((chip_scsi_id == i) || 3411 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { 3412 continue; 3413 } 3414 seq_printf(m, " %X:%u", i, v->cur_dvc_qng[i]); 3415 } 3416 3417 /* Current limit on number of commands that can be sent to a device. */ 3418 seq_puts(m, "\n Command Queue Limit:"); 3419 for (i = 0; i <= ASC_MAX_TID; i++) { 3420 if ((chip_scsi_id == i) || 3421 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { 3422 continue; 3423 } 3424 seq_printf(m, " %X:%u", i, v->max_dvc_qng[i]); 3425 } 3426 3427 /* Indicate whether the device has returned queue full status. */ 3428 seq_puts(m, "\n Command Queue Full:"); 3429 for (i = 0; i <= ASC_MAX_TID; i++) { 3430 if ((chip_scsi_id == i) || 3431 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { 3432 continue; 3433 } 3434 if (boardp->queue_full & ADV_TID_TO_TIDMASK(i)) 3435 seq_printf(m, " %X:Y-%d", 3436 i, boardp->queue_full_cnt[i]); 3437 else 3438 seq_printf(m, " %X:N", i); 3439 } 3440 3441 seq_puts(m, "\n Synchronous Transfer:"); 3442 for (i = 0; i <= ASC_MAX_TID; i++) { 3443 if ((chip_scsi_id == i) || 3444 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { 3445 continue; 3446 } 3447 seq_printf(m, " %X:%c", 3448 i, 3449 (v->sdtr_done & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3450 } 3451 seq_putc(m, '\n'); 3452 3453 for (i = 0; i <= ASC_MAX_TID; i++) { 3454 uchar syn_period_ix; 3455 3456 if ((chip_scsi_id == i) || 3457 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0) || 3458 ((v->init_sdtr & ADV_TID_TO_TIDMASK(i)) == 0)) { 3459 continue; 3460 } 3461 3462 seq_printf(m, " %X:", i); 3463 3464 if ((boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET) == 0) { 3465 seq_puts(m, " Asynchronous"); 3466 } else { 3467 syn_period_ix = 3468 (boardp->sdtr_data[i] >> 4) & (v->max_sdtr_index - 3469 1); 3470 3471 seq_printf(m, 3472 " Transfer Period Factor: %d (%d.%d Mhz),", 3473 v->sdtr_period_tbl[syn_period_ix], 3474 250 / v->sdtr_period_tbl[syn_period_ix], 3475 ASC_TENTHS(250, 3476 v->sdtr_period_tbl[syn_period_ix])); 3477 3478 seq_printf(m, " REQ/ACK Offset: %d", 3479 boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET); 3480 } 3481 3482 if ((v->sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { 3483 seq_puts(m, "*\n"); 3484 renegotiate = 1; 3485 } else { 3486 seq_putc(m, '\n'); 3487 } 3488 } 3489 3490 if (renegotiate) { 3491 seq_puts(m, " * = Re-negotiation pending before next command.\n"); 3492 } 3493} 3494 3495/* 3496 * asc_prt_adv_board_info() 3497 * 3498 * Print dynamic board configuration information. 3499 */ 3500static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) 3501{ 3502 struct asc_board *boardp = shost_priv(shost); 3503 int i; 3504 ADV_DVC_VAR *v; 3505 ADV_DVC_CFG *c; 3506 AdvPortAddr iop_base; 3507 ushort chip_scsi_id; 3508 ushort lramword; 3509 uchar lrambyte; 3510 ushort tagqng_able; 3511 ushort sdtr_able, wdtr_able; 3512 ushort wdtr_done, sdtr_done; 3513 ushort period = 0; 3514 int renegotiate = 0; 3515 3516 v = &boardp->dvc_var.adv_dvc_var; 3517 c = &boardp->dvc_cfg.adv_dvc_cfg; 3518 iop_base = v->iop_base; 3519 chip_scsi_id = v->chip_scsi_id; 3520 3521 seq_printf(m, 3522 "\nAdv Library Configuration and Statistics for AdvanSys SCSI Host %d:\n", 3523 shost->host_no); 3524 3525 seq_printf(m, 3526 " iop_base 0x%lx, cable_detect: %X, err_code %u\n", 3527 (unsigned long)v->iop_base, 3528 AdvReadWordRegister(iop_base,IOPW_SCSI_CFG1) & CABLE_DETECT, 3529 v->err_code); 3530 3531 seq_printf(m, " chip_version %u, mcode_date 0x%x, " 3532 "mcode_version 0x%x\n", c->chip_version, 3533 c->mcode_date, c->mcode_version); 3534 3535 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); 3536 seq_puts(m, " Queuing Enabled:"); 3537 for (i = 0; i <= ADV_MAX_TID; i++) { 3538 if ((chip_scsi_id == i) || 3539 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { 3540 continue; 3541 } 3542 3543 seq_printf(m, " %X:%c", 3544 i, 3545 (tagqng_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3546 } 3547 3548 seq_puts(m, "\n Queue Limit:"); 3549 for (i = 0; i <= ADV_MAX_TID; i++) { 3550 if ((chip_scsi_id == i) || 3551 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { 3552 continue; 3553 } 3554 3555 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + i, 3556 lrambyte); 3557 3558 seq_printf(m, " %X:%d", i, lrambyte); 3559 } 3560 3561 seq_puts(m, "\n Command Pending:"); 3562 for (i = 0; i <= ADV_MAX_TID; i++) { 3563 if ((chip_scsi_id == i) || 3564 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { 3565 continue; 3566 } 3567 3568 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_QUEUED_CMD + i, 3569 lrambyte); 3570 3571 seq_printf(m, " %X:%d", i, lrambyte); 3572 } 3573 seq_putc(m, '\n'); 3574 3575 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); 3576 seq_puts(m, " Wide Enabled:"); 3577 for (i = 0; i <= ADV_MAX_TID; i++) { 3578 if ((chip_scsi_id == i) || 3579 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { 3580 continue; 3581 } 3582 3583 seq_printf(m, " %X:%c", 3584 i, 3585 (wdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3586 } 3587 seq_putc(m, '\n'); 3588 3589 AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, wdtr_done); 3590 seq_puts(m, " Transfer Bit Width:"); 3591 for (i = 0; i <= ADV_MAX_TID; i++) { 3592 if ((chip_scsi_id == i) || 3593 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { 3594 continue; 3595 } 3596 3597 AdvReadWordLram(iop_base, 3598 ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i), 3599 lramword); 3600 3601 seq_printf(m, " %X:%d", 3602 i, (lramword & 0x8000) ? 16 : 8); 3603 3604 if ((wdtr_able & ADV_TID_TO_TIDMASK(i)) && 3605 (wdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { 3606 seq_putc(m, '*'); 3607 renegotiate = 1; 3608 } 3609 } 3610 seq_putc(m, '\n'); 3611 3612 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); 3613 seq_puts(m, " Synchronous Enabled:"); 3614 for (i = 0; i <= ADV_MAX_TID; i++) { 3615 if ((chip_scsi_id == i) || 3616 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { 3617 continue; 3618 } 3619 3620 seq_printf(m, " %X:%c", 3621 i, 3622 (sdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); 3623 } 3624 seq_putc(m, '\n'); 3625 3626 AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, sdtr_done); 3627 for (i = 0; i <= ADV_MAX_TID; i++) { 3628 3629 AdvReadWordLram(iop_base, 3630 ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i), 3631 lramword); 3632 lramword &= ~0x8000; 3633 3634 if ((chip_scsi_id == i) || 3635 ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0) || 3636 ((sdtr_able & ADV_TID_TO_TIDMASK(i)) == 0)) { 3637 continue; 3638 } 3639 3640 seq_printf(m, " %X:", i); 3641 3642 if ((lramword & 0x1F) == 0) { /* Check for REQ/ACK Offset 0. */ 3643 seq_puts(m, " Asynchronous"); 3644 } else { 3645 seq_puts(m, " Transfer Period Factor: "); 3646 3647 if ((lramword & 0x1F00) == 0x1100) { /* 80 Mhz */ 3648 seq_puts(m, "9 (80.0 Mhz),"); 3649 } else if ((lramword & 0x1F00) == 0x1000) { /* 40 Mhz */ 3650 seq_puts(m, "10 (40.0 Mhz),"); 3651 } else { /* 20 Mhz or below. */ 3652 3653 period = (((lramword >> 8) * 25) + 50) / 4; 3654 3655 if (period == 0) { /* Should never happen. */ 3656 seq_printf(m, "%d (? Mhz), ", period); 3657 } else { 3658 seq_printf(m, 3659 "%d (%d.%d Mhz),", 3660 period, 250 / period, 3661 ASC_TENTHS(250, period)); 3662 } 3663 } 3664 3665 seq_printf(m, " REQ/ACK Offset: %d", 3666 lramword & 0x1F); 3667 } 3668 3669 if ((sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { 3670 seq_puts(m, "*\n"); 3671 renegotiate = 1; 3672 } else { 3673 seq_putc(m, '\n'); 3674 } 3675 } 3676 3677 if (renegotiate) { 3678 seq_puts(m, " * = Re-negotiation pending before next command.\n"); 3679 } 3680} 3681 3682#ifdef ADVANSYS_STATS 3683/* 3684 * asc_prt_board_stats() 3685 */ 3686static void asc_prt_board_stats(struct seq_file *m, struct Scsi_Host *shost) 3687{ 3688 struct asc_board *boardp = shost_priv(shost); 3689 struct asc_stats *s = &boardp->asc_stats; 3690 3691 seq_printf(m, 3692 "\nLinux Driver Statistics for AdvanSys SCSI Host %d:\n", 3693 shost->host_no); 3694 3695 seq_printf(m, 3696 " queuecommand %u, reset %u, biosparam %u, interrupt %u\n", 3697 s->queuecommand, s->reset, s->biosparam, 3698 s->interrupt); 3699 3700 seq_printf(m, 3701 " callback %u, done %u, build_error %u, build_noreq %u, build_nosg %u\n", 3702 s->callback, s->done, s->build_error, 3703 s->adv_build_noreq, s->adv_build_nosg); 3704 3705 seq_printf(m, 3706 " exe_noerror %u, exe_busy %u, exe_error %u, exe_unknown %u\n", 3707 s->exe_noerror, s->exe_busy, s->exe_error, 3708 s->exe_unknown); 3709 3710 /* 3711 * Display data transfer statistics. 3712 */ 3713 if (s->xfer_cnt > 0) { 3714 seq_printf(m, " xfer_cnt %u, xfer_elem %u, ", 3715 s->xfer_cnt, s->xfer_elem); 3716 3717 seq_printf(m, "xfer_bytes %u.%01u kb\n", 3718 s->xfer_sect / 2, ASC_TENTHS(s->xfer_sect, 2)); 3719 3720 /* Scatter gather transfer statistics */ 3721 seq_printf(m, " avg_num_elem %u.%01u, ", 3722 s->xfer_elem / s->xfer_cnt, 3723 ASC_TENTHS(s->xfer_elem, s->xfer_cnt)); 3724 3725 seq_printf(m, "avg_elem_size %u.%01u kb, ", 3726 (s->xfer_sect / 2) / s->xfer_elem, 3727 ASC_TENTHS((s->xfer_sect / 2), s->xfer_elem)); 3728 3729 seq_printf(m, "avg_xfer_size %u.%01u kb\n", 3730 (s->xfer_sect / 2) / s->xfer_cnt, 3731 ASC_TENTHS((s->xfer_sect / 2), s->xfer_cnt)); 3732 } 3733} 3734#endif /* ADVANSYS_STATS */ 3735 3736/* 3737 * advansys_show_info() - /proc/scsi/advansys/{0,1,2,3,...} 3738 * 3739 * m: seq_file to print into 3740 * shost: Scsi_Host 3741 * 3742 * Return the number of bytes read from or written to a 3743 * /proc/scsi/advansys/[0...] file. 3744 */ 3745static int 3746advansys_show_info(struct seq_file *m, struct Scsi_Host *shost) 3747{ 3748 struct asc_board *boardp = shost_priv(shost); 3749 3750 ASC_DBG(1, "begin\n"); 3751 3752 /* 3753 * User read of /proc/scsi/advansys/[0...] file. 3754 */ 3755 3756 /* 3757 * Get board configuration information. 3758 * 3759 * advansys_info() returns the board string from its own static buffer. 3760 */ 3761 /* Copy board information. */ 3762 seq_printf(m, "%s\n", (char *)advansys_info(shost)); 3763 /* 3764 * Display Wide Board BIOS Information. 3765 */ 3766 if (!ASC_NARROW_BOARD(boardp)) 3767 asc_prt_adv_bios(m, shost); 3768 3769 /* 3770 * Display driver information for each device attached to the board. 3771 */ 3772 asc_prt_board_devices(m, shost); 3773 3774 /* 3775 * Display EEPROM configuration for the board. 3776 */ 3777 if (ASC_NARROW_BOARD(boardp)) 3778 asc_prt_asc_board_eeprom(m, shost); 3779 else 3780 asc_prt_adv_board_eeprom(m, shost); 3781 3782 /* 3783 * Display driver configuration and information for the board. 3784 */ 3785 asc_prt_driver_conf(m, shost); 3786 3787#ifdef ADVANSYS_STATS 3788 /* 3789 * Display driver statistics for the board. 3790 */ 3791 asc_prt_board_stats(m, shost); 3792#endif /* ADVANSYS_STATS */ 3793 3794 /* 3795 * Display Asc Library dynamic configuration information 3796 * for the board. 3797 */ 3798 if (ASC_NARROW_BOARD(boardp)) 3799 asc_prt_asc_board_info(m, shost); 3800 else 3801 asc_prt_adv_board_info(m, shost); 3802 return 0; 3803} 3804#endif /* CONFIG_PROC_FS */ 3805 3806static void asc_scsi_done(struct scsi_cmnd *scp) 3807{ 3808 scsi_dma_unmap(scp); 3809 ASC_STATS(scp->device->host, done); 3810 scp->scsi_done(scp); 3811} 3812 3813static void AscSetBank(PortAddr iop_base, uchar bank) 3814{ 3815 uchar val; 3816 3817 val = AscGetChipControl(iop_base) & 3818 (~ 3819 (CC_SINGLE_STEP | CC_TEST | CC_DIAG | CC_SCSI_RESET | 3820 CC_CHIP_RESET)); 3821 if (bank == 1) { 3822 val |= CC_BANK_ONE; 3823 } else if (bank == 2) { 3824 val |= CC_DIAG | CC_BANK_ONE; 3825 } else { 3826 val &= ~CC_BANK_ONE; 3827 } 3828 AscSetChipControl(iop_base, val); 3829} 3830 3831static void AscSetChipIH(PortAddr iop_base, ushort ins_code) 3832{ 3833 AscSetBank(iop_base, 1); 3834 AscWriteChipIH(iop_base, ins_code); 3835 AscSetBank(iop_base, 0); 3836} 3837 3838static int AscStartChip(PortAddr iop_base) 3839{ 3840 AscSetChipControl(iop_base, 0); 3841 if ((AscGetChipStatus(iop_base) & CSW_HALTED) != 0) { 3842 return (0); 3843 } 3844 return (1); 3845} 3846 3847static int AscStopChip(PortAddr iop_base) 3848{ 3849 uchar cc_val; 3850 3851 cc_val = 3852 AscGetChipControl(iop_base) & 3853 (~(CC_SINGLE_STEP | CC_TEST | CC_DIAG)); 3854 AscSetChipControl(iop_base, (uchar)(cc_val | CC_HALT)); 3855 AscSetChipIH(iop_base, INS_HALT); 3856 AscSetChipIH(iop_base, INS_RFLAG_WTM); 3857 if ((AscGetChipStatus(iop_base) & CSW_HALTED) == 0) { 3858 return (0); 3859 } 3860 return (1); 3861} 3862 3863static int AscIsChipHalted(PortAddr iop_base) 3864{ 3865 if ((AscGetChipStatus(iop_base) & CSW_HALTED) != 0) { 3866 if ((AscGetChipControl(iop_base) & CC_HALT) != 0) { 3867 return (1); 3868 } 3869 } 3870 return (0); 3871} 3872 3873static int AscResetChipAndScsiBus(ASC_DVC_VAR *asc_dvc) 3874{ 3875 PortAddr iop_base; 3876 int i = 10; 3877 3878 iop_base = asc_dvc->iop_base; 3879 while ((AscGetChipStatus(iop_base) & CSW_SCSI_RESET_ACTIVE) 3880 && (i-- > 0)) { 3881 mdelay(100); 3882 } 3883 AscStopChip(iop_base); 3884 AscSetChipControl(iop_base, CC_CHIP_RESET | CC_SCSI_RESET | CC_HALT); 3885 udelay(60); 3886 AscSetChipIH(iop_base, INS_RFLAG_WTM); 3887 AscSetChipIH(iop_base, INS_HALT); 3888 AscSetChipControl(iop_base, CC_CHIP_RESET | CC_HALT); 3889 AscSetChipControl(iop_base, CC_HALT); 3890 mdelay(200); 3891 AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT); 3892 AscSetChipStatus(iop_base, 0); 3893 return (AscIsChipHalted(iop_base)); 3894} 3895 3896static int AscFindSignature(PortAddr iop_base) 3897{ 3898 ushort sig_word; 3899 3900 ASC_DBG(1, "AscGetChipSignatureByte(0x%x) 0x%x\n", 3901 iop_base, AscGetChipSignatureByte(iop_base)); 3902 if (AscGetChipSignatureByte(iop_base) == (uchar)ASC_1000_ID1B) { 3903 ASC_DBG(1, "AscGetChipSignatureWord(0x%x) 0x%x\n", 3904 iop_base, AscGetChipSignatureWord(iop_base)); 3905 sig_word = AscGetChipSignatureWord(iop_base); 3906 if ((sig_word == (ushort)ASC_1000_ID0W) || 3907 (sig_word == (ushort)ASC_1000_ID0W_FIX)) { 3908 return (1); 3909 } 3910 } 3911 return (0); 3912} 3913 3914static void AscEnableInterrupt(PortAddr iop_base) 3915{ 3916 ushort cfg; 3917 3918 cfg = AscGetChipCfgLsw(iop_base); 3919 AscSetChipCfgLsw(iop_base, cfg | ASC_CFG0_HOST_INT_ON); 3920} 3921 3922static void AscDisableInterrupt(PortAddr iop_base) 3923{ 3924 ushort cfg; 3925 3926 cfg = AscGetChipCfgLsw(iop_base); 3927 AscSetChipCfgLsw(iop_base, cfg & (~ASC_CFG0_HOST_INT_ON)); 3928} 3929 3930static uchar AscReadLramByte(PortAddr iop_base, ushort addr) 3931{ 3932 unsigned char byte_data; 3933 unsigned short word_data; 3934 3935 if (isodd_word(addr)) { 3936 AscSetChipLramAddr(iop_base, addr - 1); 3937 word_data = AscGetChipLramData(iop_base); 3938 byte_data = (word_data >> 8) & 0xFF; 3939 } else { 3940 AscSetChipLramAddr(iop_base, addr); 3941 word_data = AscGetChipLramData(iop_base); 3942 byte_data = word_data & 0xFF; 3943 } 3944 return byte_data; 3945} 3946 3947static ushort AscReadLramWord(PortAddr iop_base, ushort addr) 3948{ 3949 ushort word_data; 3950 3951 AscSetChipLramAddr(iop_base, addr); 3952 word_data = AscGetChipLramData(iop_base); 3953 return (word_data); 3954} 3955 3956#if CC_VERY_LONG_SG_LIST 3957static ASC_DCNT AscReadLramDWord(PortAddr iop_base, ushort addr) 3958{ 3959 ushort val_low, val_high; 3960 ASC_DCNT dword_data; 3961 3962 AscSetChipLramAddr(iop_base, addr); 3963 val_low = AscGetChipLramData(iop_base); 3964 val_high = AscGetChipLramData(iop_base); 3965 dword_data = ((ASC_DCNT) val_high << 16) | (ASC_DCNT) val_low; 3966 return (dword_data); 3967} 3968#endif /* CC_VERY_LONG_SG_LIST */ 3969 3970static void 3971AscMemWordSetLram(PortAddr iop_base, ushort s_addr, ushort set_wval, int words) 3972{ 3973 int i; 3974 3975 AscSetChipLramAddr(iop_base, s_addr); 3976 for (i = 0; i < words; i++) { 3977 AscSetChipLramData(iop_base, set_wval); 3978 } 3979} 3980 3981static void AscWriteLramWord(PortAddr iop_base, ushort addr, ushort word_val) 3982{ 3983 AscSetChipLramAddr(iop_base, addr); 3984 AscSetChipLramData(iop_base, word_val); 3985} 3986 3987static void AscWriteLramByte(PortAddr iop_base, ushort addr, uchar byte_val) 3988{ 3989 ushort word_data; 3990 3991 if (isodd_word(addr)) { 3992 addr--; 3993 word_data = AscReadLramWord(iop_base, addr); 3994 word_data &= 0x00FF; 3995 word_data |= (((ushort)byte_val << 8) & 0xFF00); 3996 } else { 3997 word_data = AscReadLramWord(iop_base, addr); 3998 word_data &= 0xFF00; 3999 word_data |= ((ushort)byte_val & 0x00FF); 4000 } 4001 AscWriteLramWord(iop_base, addr, word_data); 4002} 4003 4004/* 4005 * Copy 2 bytes to LRAM. 4006 * 4007 * The source data is assumed to be in little-endian order in memory 4008 * and is maintained in little-endian order when written to LRAM. 4009 */ 4010static void 4011AscMemWordCopyPtrToLram(PortAddr iop_base, ushort s_addr, 4012 const uchar *s_buffer, int words) 4013{ 4014 int i; 4015 4016 AscSetChipLramAddr(iop_base, s_addr); 4017 for (i = 0; i < 2 * words; i += 2) { 4018 /* 4019 * On a little-endian system the second argument below 4020 * produces a little-endian ushort which is written to 4021 * LRAM in little-endian order. On a big-endian system 4022 * the second argument produces a big-endian ushort which 4023 * is "transparently" byte-swapped by outpw() and written 4024 * in little-endian order to LRAM. 4025 */ 4026 outpw(iop_base + IOP_RAM_DATA, 4027 ((ushort)s_buffer[i + 1] << 8) | s_buffer[i]); 4028 } 4029} 4030 4031/* 4032 * Copy 4 bytes to LRAM. 4033 * 4034 * The source data is assumed to be in little-endian order in memory 4035 * and is maintained in little-endian order when written to LRAM. 4036 */ 4037static void 4038AscMemDWordCopyPtrToLram(PortAddr iop_base, 4039 ushort s_addr, uchar *s_buffer, int dwords) 4040{ 4041 int i; 4042 4043 AscSetChipLramAddr(iop_base, s_addr); 4044 for (i = 0; i < 4 * dwords; i += 4) { 4045 outpw(iop_base + IOP_RAM_DATA, ((ushort)s_buffer[i + 1] << 8) | s_buffer[i]); /* LSW */ 4046 outpw(iop_base + IOP_RAM_DATA, ((ushort)s_buffer[i + 3] << 8) | s_buffer[i + 2]); /* MSW */ 4047 } 4048} 4049 4050/* 4051 * Copy 2 bytes from LRAM. 4052 * 4053 * The source data is assumed to be in little-endian order in LRAM 4054 * and is maintained in little-endian order when written to memory. 4055 */ 4056static void 4057AscMemWordCopyPtrFromLram(PortAddr iop_base, 4058 ushort s_addr, uchar *d_buffer, int words) 4059{ 4060 int i; 4061 ushort word; 4062 4063 AscSetChipLramAddr(iop_base, s_addr); 4064 for (i = 0; i < 2 * words; i += 2) { 4065 word = inpw(iop_base + IOP_RAM_DATA); 4066 d_buffer[i] = word & 0xff; 4067 d_buffer[i + 1] = (word >> 8) & 0xff; 4068 } 4069} 4070 4071static ASC_DCNT AscMemSumLramWord(PortAddr iop_base, ushort s_addr, int words) 4072{ 4073 ASC_DCNT sum; 4074 int i; 4075 4076 sum = 0L; 4077 for (i = 0; i < words; i++, s_addr += 2) { 4078 sum += AscReadLramWord(iop_base, s_addr); 4079 } 4080 return (sum); 4081} 4082 4083static ushort AscInitLram(ASC_DVC_VAR *asc_dvc) 4084{ 4085 uchar i; 4086 ushort s_addr; 4087 PortAddr iop_base; 4088 ushort warn_code; 4089 4090 iop_base = asc_dvc->iop_base; 4091 warn_code = 0; 4092 AscMemWordSetLram(iop_base, ASC_QADR_BEG, 0, 4093 (ushort)(((int)(asc_dvc->max_total_qng + 2 + 1) * 4094 64) >> 1)); 4095 i = ASC_MIN_ACTIVE_QNO; 4096 s_addr = ASC_QADR_BEG + ASC_QBLK_SIZE; 4097 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD), 4098 (uchar)(i + 1)); 4099 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD), 4100 (uchar)(asc_dvc->max_total_qng)); 4101 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO), 4102 (uchar)i); 4103 i++; 4104 s_addr += ASC_QBLK_SIZE; 4105 for (; i < asc_dvc->max_total_qng; i++, s_addr += ASC_QBLK_SIZE) { 4106 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD), 4107 (uchar)(i + 1)); 4108 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD), 4109 (uchar)(i - 1)); 4110 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO), 4111 (uchar)i); 4112 } 4113 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD), 4114 (uchar)ASC_QLINK_END); 4115 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD), 4116 (uchar)(asc_dvc->max_total_qng - 1)); 4117 AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO), 4118 (uchar)asc_dvc->max_total_qng); 4119 i++; 4120 s_addr += ASC_QBLK_SIZE; 4121 for (; i <= (uchar)(asc_dvc->max_total_qng + 3); 4122 i++, s_addr += ASC_QBLK_SIZE) { 4123 AscWriteLramByte(iop_base, 4124 (ushort)(s_addr + (ushort)ASC_SCSIQ_B_FWD), i); 4125 AscWriteLramByte(iop_base, 4126 (ushort)(s_addr + (ushort)ASC_SCSIQ_B_BWD), i); 4127 AscWriteLramByte(iop_base, 4128 (ushort)(s_addr + (ushort)ASC_SCSIQ_B_QNO), i); 4129 } 4130 return warn_code; 4131} 4132 4133static ASC_DCNT 4134AscLoadMicroCode(PortAddr iop_base, ushort s_addr, 4135 const uchar *mcode_buf, ushort mcode_size) 4136{ 4137 ASC_DCNT chksum; 4138 ushort mcode_word_size; 4139 ushort mcode_chksum; 4140 4141 /* Write the microcode buffer starting at LRAM address 0. */ 4142 mcode_word_size = (ushort)(mcode_size >> 1); 4143 AscMemWordSetLram(iop_base, s_addr, 0, mcode_word_size); 4144 AscMemWordCopyPtrToLram(iop_base, s_addr, mcode_buf, mcode_word_size); 4145 4146 chksum = AscMemSumLramWord(iop_base, s_addr, mcode_word_size); 4147 ASC_DBG(1, "chksum 0x%lx\n", (ulong)chksum); 4148 mcode_chksum = (ushort)AscMemSumLramWord(iop_base, 4149 (ushort)ASC_CODE_SEC_BEG, 4150 (ushort)((mcode_size - 4151 s_addr - (ushort) 4152 ASC_CODE_SEC_BEG) / 4153 2)); 4154 ASC_DBG(1, "mcode_chksum 0x%lx\n", (ulong)mcode_chksum); 4155 AscWriteLramWord(iop_base, ASCV_MCODE_CHKSUM_W, mcode_chksum); 4156 AscWriteLramWord(iop_base, ASCV_MCODE_SIZE_W, mcode_size); 4157 return chksum; 4158} 4159 4160static void AscInitQLinkVar(ASC_DVC_VAR *asc_dvc) 4161{ 4162 PortAddr iop_base; 4163 int i; 4164 ushort lram_addr; 4165 4166 iop_base = asc_dvc->iop_base; 4167 AscPutRiscVarFreeQHead(iop_base, 1); 4168 AscPutRiscVarDoneQTail(iop_base, asc_dvc->max_total_qng); 4169 AscPutVarFreeQHead(iop_base, 1); 4170 AscPutVarDoneQTail(iop_base, asc_dvc->max_total_qng); 4171 AscWriteLramByte(iop_base, ASCV_BUSY_QHEAD_B, 4172 (uchar)((int)asc_dvc->max_total_qng + 1)); 4173 AscWriteLramByte(iop_base, ASCV_DISC1_QHEAD_B, 4174 (uchar)((int)asc_dvc->max_total_qng + 2)); 4175 AscWriteLramByte(iop_base, (ushort)ASCV_TOTAL_READY_Q_B, 4176 asc_dvc->max_total_qng); 4177 AscWriteLramWord(iop_base, ASCV_ASCDVC_ERR_CODE_W, 0); 4178 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); 4179 AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, 0); 4180 AscWriteLramByte(iop_base, ASCV_SCSIBUSY_B, 0); 4181 AscWriteLramByte(iop_base, ASCV_WTM_FLAG_B, 0); 4182 AscPutQDoneInProgress(iop_base, 0); 4183 lram_addr = ASC_QADR_BEG; 4184 for (i = 0; i < 32; i++, lram_addr += 2) { 4185 AscWriteLramWord(iop_base, lram_addr, 0); 4186 } 4187} 4188 4189static ushort AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc) 4190{ 4191 int i; 4192 ushort warn_code; 4193 PortAddr iop_base; 4194 ASC_PADDR phy_addr; 4195 ASC_DCNT phy_size; 4196 struct asc_board *board = asc_dvc_to_board(asc_dvc); 4197 4198 iop_base = asc_dvc->iop_base; 4199 warn_code = 0; 4200 for (i = 0; i <= ASC_MAX_TID; i++) { 4201 AscPutMCodeInitSDTRAtID(iop_base, i, 4202 asc_dvc->cfg->sdtr_period_offset[i]); 4203 } 4204 4205 AscInitQLinkVar(asc_dvc); 4206 AscWriteLramByte(iop_base, ASCV_DISC_ENABLE_B, 4207 asc_dvc->cfg->disc_enable); 4208 AscWriteLramByte(iop_base, ASCV_HOSTSCSI_ID_B, 4209 ASC_TID_TO_TARGET_ID(asc_dvc->cfg->chip_scsi_id)); 4210 4211 /* Ensure overrun buffer is aligned on an 8 byte boundary. */ 4212 BUG_ON((unsigned long)asc_dvc->overrun_buf & 7); 4213 asc_dvc->overrun_dma = dma_map_single(board->dev, asc_dvc->overrun_buf, 4214 ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); 4215 if (dma_mapping_error(board->dev, asc_dvc->overrun_dma)) { 4216 warn_code = -ENOMEM; 4217 goto err_dma_map; 4218 } 4219 phy_addr = cpu_to_le32(asc_dvc->overrun_dma); 4220 AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_PADDR_D, 4221 (uchar *)&phy_addr, 1); 4222 phy_size = cpu_to_le32(ASC_OVERRUN_BSIZE); 4223 AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_BSIZE_D, 4224 (uchar *)&phy_size, 1); 4225 4226 asc_dvc->cfg->mcode_date = 4227 AscReadLramWord(iop_base, (ushort)ASCV_MC_DATE_W); 4228 asc_dvc->cfg->mcode_version = 4229 AscReadLramWord(iop_base, (ushort)ASCV_MC_VER_W); 4230 4231 AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR); 4232 if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) { 4233 asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR; 4234 warn_code = UW_ERR; 4235 goto err_mcode_start; 4236 } 4237 if (AscStartChip(iop_base) != 1) { 4238 asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP; 4239 warn_code = UW_ERR; 4240 goto err_mcode_start; 4241 } 4242 4243 return warn_code; 4244 4245err_mcode_start: 4246 dma_unmap_single(board->dev, asc_dvc->overrun_dma, 4247 ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); 4248err_dma_map: 4249 asc_dvc->overrun_dma = 0; 4250 return warn_code; 4251} 4252 4253static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc) 4254{ 4255 const struct firmware *fw; 4256 const char fwname[] = "advansys/mcode.bin"; 4257 int err; 4258 unsigned long chksum; 4259 ushort warn_code; 4260 PortAddr iop_base; 4261 4262 iop_base = asc_dvc->iop_base; 4263 warn_code = 0; 4264 if ((asc_dvc->dvc_cntl & ASC_CNTL_RESET_SCSI) && 4265 !(asc_dvc->init_state & ASC_INIT_RESET_SCSI_DONE)) { 4266 AscResetChipAndScsiBus(asc_dvc); 4267 mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */ 4268 } 4269 asc_dvc->init_state |= ASC_INIT_STATE_BEG_LOAD_MC; 4270 if (asc_dvc->err_code != 0) 4271 return UW_ERR; 4272 if (!AscFindSignature(asc_dvc->iop_base)) { 4273 asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; 4274 return warn_code; 4275 } 4276 AscDisableInterrupt(iop_base); 4277 warn_code |= AscInitLram(asc_dvc); 4278 if (asc_dvc->err_code != 0) 4279 return UW_ERR; 4280 4281 err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); 4282 if (err) { 4283 printk(KERN_ERR "Failed to load image \"%s\" err %d\n", 4284 fwname, err); 4285 asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; 4286 return err; 4287 } 4288 if (fw->size < 4) { 4289 printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", 4290 fw->size, fwname); 4291 release_firmware(fw); 4292 asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; 4293 return -EINVAL; 4294 } 4295 chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | 4296 (fw->data[1] << 8) | fw->data[0]; 4297 ASC_DBG(1, "_asc_mcode_chksum 0x%lx\n", (ulong)chksum); 4298 if (AscLoadMicroCode(iop_base, 0, &fw->data[4], 4299 fw->size - 4) != chksum) { 4300 asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; 4301 release_firmware(fw); 4302 return warn_code; 4303 } 4304 release_firmware(fw); 4305 warn_code |= AscInitMicroCodeVar(asc_dvc); 4306 if (!asc_dvc->overrun_dma) 4307 return warn_code; 4308 asc_dvc->init_state |= ASC_INIT_STATE_END_LOAD_MC; 4309 AscEnableInterrupt(iop_base); 4310 return warn_code; 4311} 4312 4313/* 4314 * Load the Microcode 4315 * 4316 * Write the microcode image to RISC memory starting at address 0. 4317 * 4318 * The microcode is stored compressed in the following format: 4319 * 4320 * 254 word (508 byte) table indexed by byte code followed 4321 * by the following byte codes: 4322 * 4323 * 1-Byte Code: 4324 * 00: Emit word 0 in table. 4325 * 01: Emit word 1 in table. 4326 * . 4327 * FD: Emit word 253 in table. 4328 * 4329 * Multi-Byte Code: 4330 * FE WW WW: (3 byte code) Word to emit is the next word WW WW. 4331 * FF BB WW WW: (4 byte code) Emit BB count times next word WW WW. 4332 * 4333 * Returns 0 or an error if the checksum doesn't match 4334 */ 4335static int AdvLoadMicrocode(AdvPortAddr iop_base, const unsigned char *buf, 4336 int size, int memsize, int chksum) 4337{ 4338 int i, j, end, len = 0; 4339 ADV_DCNT sum; 4340 4341 AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0); 4342 4343 for (i = 253 * 2; i < size; i++) { 4344 if (buf[i] == 0xff) { 4345 unsigned short word = (buf[i + 3] << 8) | buf[i + 2]; 4346 for (j = 0; j < buf[i + 1]; j++) { 4347 AdvWriteWordAutoIncLram(iop_base, word); 4348 len += 2; 4349 } 4350 i += 3; 4351 } else if (buf[i] == 0xfe) { 4352 unsigned short word = (buf[i + 2] << 8) | buf[i + 1]; 4353 AdvWriteWordAutoIncLram(iop_base, word); 4354 i += 2; 4355 len += 2; 4356 } else { 4357 unsigned int off = buf[i] * 2; 4358 unsigned short word = (buf[off + 1] << 8) | buf[off]; 4359 AdvWriteWordAutoIncLram(iop_base, word); 4360 len += 2; 4361 } 4362 } 4363 4364 end = len; 4365 4366 while (len < memsize) { 4367 AdvWriteWordAutoIncLram(iop_base, 0); 4368 len += 2; 4369 } 4370 4371 /* Verify the microcode checksum. */ 4372 sum = 0; 4373 AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0); 4374 4375 for (len = 0; len < end; len += 2) { 4376 sum += AdvReadWordAutoIncLram(iop_base); 4377 } 4378 4379 if (sum != chksum) 4380 return ASC_IERR_MCODE_CHKSUM; 4381 4382 return 0; 4383} 4384 4385static void AdvBuildCarrierFreelist(struct adv_dvc_var *asc_dvc) 4386{ 4387 ADV_CARR_T *carrp; 4388 ADV_SDCNT buf_size; 4389 ADV_PADDR carr_paddr; 4390 4391 carrp = (ADV_CARR_T *) ADV_16BALIGN(asc_dvc->carrier_buf); 4392 asc_dvc->carr_freelist = NULL; 4393 if (carrp == asc_dvc->carrier_buf) { 4394 buf_size = ADV_CARRIER_BUFSIZE; 4395 } else { 4396 buf_size = ADV_CARRIER_BUFSIZE - sizeof(ADV_CARR_T); 4397 } 4398 4399 do { 4400 /* Get physical address of the carrier 'carrp'. */ 4401 carr_paddr = cpu_to_le32(virt_to_bus(carrp)); 4402 4403 buf_size -= sizeof(ADV_CARR_T); 4404 4405 carrp->carr_pa = carr_paddr; 4406 carrp->carr_va = cpu_to_le32(ADV_VADDR_TO_U32(carrp)); 4407 4408 /* 4409 * Insert the carrier at the beginning of the freelist. 4410 */ 4411 carrp->next_vpa = 4412 cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->carr_freelist)); 4413 asc_dvc->carr_freelist = carrp; 4414 4415 carrp++; 4416 } while (buf_size > 0); 4417} 4418 4419/* 4420 * Send an idle command to the chip and wait for completion. 4421 * 4422 * Command completion is polled for once per microsecond. 4423 * 4424 * The function can be called from anywhere including an interrupt handler. 4425 * But the function is not re-entrant, so it uses the DvcEnter/LeaveCritical() 4426 * functions to prevent reentrancy. 4427 * 4428 * Return Values: 4429 * ADV_TRUE - command completed successfully 4430 * ADV_FALSE - command failed 4431 * ADV_ERROR - command timed out 4432 */ 4433static int 4434AdvSendIdleCmd(ADV_DVC_VAR *asc_dvc, 4435 ushort idle_cmd, ADV_DCNT idle_cmd_parameter) 4436{ 4437 int result; 4438 ADV_DCNT i, j; 4439 AdvPortAddr iop_base; 4440 4441 iop_base = asc_dvc->iop_base; 4442 4443 /* 4444 * Clear the idle command status which is set by the microcode 4445 * to a non-zero value to indicate when the command is completed. 4446 * The non-zero result is one of the IDLE_CMD_STATUS_* values 4447 */ 4448 AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS, (ushort)0); 4449 4450 /* 4451 * Write the idle command value after the idle command parameter 4452 * has been written to avoid a race condition. If the order is not 4453 * followed, the microcode may process the idle command before the 4454 * parameters have been written to LRAM. 4455 */ 4456 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IDLE_CMD_PARAMETER, 4457 cpu_to_le32(idle_cmd_parameter)); 4458 AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD, idle_cmd); 4459 4460 /* 4461 * Tickle the RISC to tell it to process the idle command. 4462 */ 4463 AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_B); 4464 if (asc_dvc->chip_type == ADV_CHIP_ASC3550) { 4465 /* 4466 * Clear the tickle value. In the ASC-3550 the RISC flag 4467 * command 'clr_tickle_b' does not work unless the host 4468 * value is cleared. 4469 */ 4470 AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_NOP); 4471 } 4472 4473 /* Wait for up to 100 millisecond for the idle command to timeout. */ 4474 for (i = 0; i < SCSI_WAIT_100_MSEC; i++) { 4475 /* Poll once each microsecond for command completion. */ 4476 for (j = 0; j < SCSI_US_PER_MSEC; j++) { 4477 AdvReadWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS, 4478 result); 4479 if (result != 0) 4480 return result; 4481 udelay(1); 4482 } 4483 } 4484 4485 BUG(); /* The idle command should never timeout. */ 4486 return ADV_ERROR; 4487} 4488 4489/* 4490 * Reset SCSI Bus and purge all outstanding requests. 4491 * 4492 * Return Value: 4493 * ADV_TRUE(1) - All requests are purged and SCSI Bus is reset. 4494 * ADV_FALSE(0) - Microcode command failed. 4495 * ADV_ERROR(-1) - Microcode command timed-out. Microcode or IC 4496 * may be hung which requires driver recovery. 4497 */ 4498static int AdvResetSB(ADV_DVC_VAR *asc_dvc) 4499{ 4500 int status; 4501 4502 /* 4503 * Send the SCSI Bus Reset idle start idle command which asserts 4504 * the SCSI Bus Reset signal. 4505 */ 4506 status = AdvSendIdleCmd(asc_dvc, (ushort)IDLE_CMD_SCSI_RESET_START, 0L); 4507 if (status != ADV_TRUE) { 4508 return status; 4509 } 4510 4511 /* 4512 * Delay for the specified SCSI Bus Reset hold time. 4513 * 4514 * The hold time delay is done on the host because the RISC has no 4515 * microsecond accurate timer. 4516 */ 4517 udelay(ASC_SCSI_RESET_HOLD_TIME_US); 4518 4519 /* 4520 * Send the SCSI Bus Reset end idle command which de-asserts 4521 * the SCSI Bus Reset signal and purges any pending requests. 4522 */ 4523 status = AdvSendIdleCmd(asc_dvc, (ushort)IDLE_CMD_SCSI_RESET_END, 0L); 4524 if (status != ADV_TRUE) { 4525 return status; 4526 } 4527 4528 mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */ 4529 4530 return status; 4531} 4532 4533/* 4534 * Initialize the ASC-3550. 4535 * 4536 * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. 4537 * 4538 * For a non-fatal error return a warning code. If there are no warnings 4539 * then 0 is returned. 4540 * 4541 * Needed after initialization for error recovery. 4542 */ 4543static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc) 4544{ 4545 const struct firmware *fw; 4546 const char fwname[] = "advansys/3550.bin"; 4547 AdvPortAddr iop_base; 4548 ushort warn_code; 4549 int begin_addr; 4550 int end_addr; 4551 ushort code_sum; 4552 int word; 4553 int i; 4554 int err; 4555 unsigned long chksum; 4556 ushort scsi_cfg1; 4557 uchar tid; 4558 ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */ 4559 ushort wdtr_able = 0, sdtr_able, tagqng_able; 4560 uchar max_cmd[ADV_MAX_TID + 1]; 4561 4562 /* If there is already an error, don't continue. */ 4563 if (asc_dvc->err_code != 0) 4564 return ADV_ERROR; 4565 4566 /* 4567 * The caller must set 'chip_type' to ADV_CHIP_ASC3550. 4568 */ 4569 if (asc_dvc->chip_type != ADV_CHIP_ASC3550) { 4570 asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE; 4571 return ADV_ERROR; 4572 } 4573 4574 warn_code = 0; 4575 iop_base = asc_dvc->iop_base; 4576 4577 /* 4578 * Save the RISC memory BIOS region before writing the microcode. 4579 * The BIOS may already be loaded and using its RISC LRAM region 4580 * so its region must be saved and restored. 4581 * 4582 * Note: This code makes the assumption, which is currently true, 4583 * that a chip reset does not clear RISC LRAM. 4584 */ 4585 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { 4586 AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), 4587 bios_mem[i]); 4588 } 4589 4590 /* 4591 * Save current per TID negotiated values. 4592 */ 4593 if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == 0x55AA) { 4594 ushort bios_version, major, minor; 4595 4596 bios_version = 4597 bios_mem[(ASC_MC_BIOS_VERSION - ASC_MC_BIOSMEM) / 2]; 4598 major = (bios_version >> 12) & 0xF; 4599 minor = (bios_version >> 8) & 0xF; 4600 if (major < 3 || (major == 3 && minor == 1)) { 4601 /* BIOS 3.1 and earlier location of 'wdtr_able' variable. */ 4602 AdvReadWordLram(iop_base, 0x120, wdtr_able); 4603 } else { 4604 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); 4605 } 4606 } 4607 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); 4608 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); 4609 for (tid = 0; tid <= ADV_MAX_TID; tid++) { 4610 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, 4611 max_cmd[tid]); 4612 } 4613 4614 err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); 4615 if (err) { 4616 printk(KERN_ERR "Failed to load image \"%s\" err %d\n", 4617 fwname, err); 4618 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; 4619 return err; 4620 } 4621 if (fw->size < 4) { 4622 printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", 4623 fw->size, fwname); 4624 release_firmware(fw); 4625 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; 4626 return -EINVAL; 4627 } 4628 chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | 4629 (fw->data[1] << 8) | fw->data[0]; 4630 asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4], 4631 fw->size - 4, ADV_3550_MEMSIZE, 4632 chksum); 4633 release_firmware(fw); 4634 if (asc_dvc->err_code) 4635 return ADV_ERROR; 4636 4637 /* 4638 * Restore the RISC memory BIOS region. 4639 */ 4640 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { 4641 AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), 4642 bios_mem[i]); 4643 } 4644 4645 /* 4646 * Calculate and write the microcode code checksum to the microcode 4647 * code checksum location ASC_MC_CODE_CHK_SUM (0x2C). 4648 */ 4649 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr); 4650 AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr); 4651 code_sum = 0; 4652 AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr); 4653 for (word = begin_addr; word < end_addr; word += 2) { 4654 code_sum += AdvReadWordAutoIncLram(iop_base); 4655 } 4656 AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum); 4657 4658 /* 4659 * Read and save microcode version and date. 4660 */ 4661 AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, 4662 asc_dvc->cfg->mcode_date); 4663 AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, 4664 asc_dvc->cfg->mcode_version); 4665 4666 /* 4667 * Set the chip type to indicate the ASC3550. 4668 */ 4669 AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC3550); 4670 4671 /* 4672 * If the PCI Configuration Command Register "Parity Error Response 4673 * Control" Bit was clear (0), then set the microcode variable 4674 * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode 4675 * to ignore DMA parity errors. 4676 */ 4677 if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) { 4678 AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); 4679 word |= CONTROL_FLAG_IGNORE_PERR; 4680 AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); 4681 } 4682 4683 /* 4684 * For ASC-3550, setting the START_CTL_EMFU [3:2] bits sets a FIFO 4685 * threshold of 128 bytes. This register is only accessible to the host. 4686 */ 4687 AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0, 4688 START_CTL_EMFU | READ_CMD_MRM); 4689 4690 /* 4691 * Microcode operating variables for WDTR, SDTR, and command tag 4692 * queuing will be set in slave_configure() based on what a 4693 * device reports it is capable of in Inquiry byte 7. 4694 * 4695 * If SCSI Bus Resets have been disabled, then directly set 4696 * SDTR and WDTR from the EEPROM configuration. This will allow 4697 * the BIOS and warm boot to work without a SCSI bus hang on 4698 * the Inquiry caused by host and target mismatched DTR values. 4699 * Without the SCSI Bus Reset, before an Inquiry a device can't 4700 * be assumed to be in Asynchronous, Narrow mode. 4701 */ 4702 if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) { 4703 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, 4704 asc_dvc->wdtr_able); 4705 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, 4706 asc_dvc->sdtr_able); 4707 } 4708 4709 /* 4710 * Set microcode operating variables for SDTR_SPEED1, SDTR_SPEED2, 4711 * SDTR_SPEED3, and SDTR_SPEED4 based on the ULTRA EEPROM per TID 4712 * bitmask. These values determine the maximum SDTR speed negotiated 4713 * with a device. 4714 * 4715 * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2, 4716 * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them 4717 * without determining here whether the device supports SDTR. 4718 * 4719 * 4-bit speed SDTR speed name 4720 * =========== =============== 4721 * 0000b (0x0) SDTR disabled 4722 * 0001b (0x1) 5 Mhz 4723 * 0010b (0x2) 10 Mhz 4724 * 0011b (0x3) 20 Mhz (Ultra) 4725 * 0100b (0x4) 40 Mhz (LVD/Ultra2) 4726 * 0101b (0x5) 80 Mhz (LVD2/Ultra3) 4727 * 0110b (0x6) Undefined 4728 * . 4729 * 1111b (0xF) Undefined 4730 */ 4731 word = 0; 4732 for (tid = 0; tid <= ADV_MAX_TID; tid++) { 4733 if (ADV_TID_TO_TIDMASK(tid) & asc_dvc->ultra_able) { 4734 /* Set Ultra speed for TID 'tid'. */ 4735 word |= (0x3 << (4 * (tid % 4))); 4736 } else { 4737 /* Set Fast speed for TID 'tid'. */ 4738 word |= (0x2 << (4 * (tid % 4))); 4739 } 4740 if (tid == 3) { /* Check if done with sdtr_speed1. */ 4741 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, word); 4742 word = 0; 4743 } else if (tid == 7) { /* Check if done with sdtr_speed2. */ 4744 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, word); 4745 word = 0; 4746 } else if (tid == 11) { /* Check if done with sdtr_speed3. */ 4747 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, word); 4748 word = 0; 4749 } else if (tid == 15) { /* Check if done with sdtr_speed4. */ 4750 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, word); 4751 /* End of loop. */ 4752 } 4753 } 4754 4755 /* 4756 * Set microcode operating variable for the disconnect per TID bitmask. 4757 */ 4758 AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, 4759 asc_dvc->cfg->disc_enable); 4760 4761 /* 4762 * Set SCSI_CFG0 Microcode Default Value. 4763 * 4764 * The microcode will set the SCSI_CFG0 register using this value 4765 * after it is started below. 4766 */ 4767 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0, 4768 PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN | 4769 asc_dvc->chip_scsi_id); 4770 4771 /* 4772 * Determine SCSI_CFG1 Microcode Default Value. 4773 * 4774 * The microcode will set the SCSI_CFG1 register using this value 4775 * after it is started below. 4776 */ 4777 4778 /* Read current SCSI_CFG1 Register value. */ 4779 scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); 4780 4781 /* 4782 * If all three connectors are in use, return an error. 4783 */ 4784 if ((scsi_cfg1 & CABLE_ILLEGAL_A) == 0 || 4785 (scsi_cfg1 & CABLE_ILLEGAL_B) == 0) { 4786 asc_dvc->err_code |= ASC_IERR_ILLEGAL_CONNECTION; 4787 return ADV_ERROR; 4788 } 4789 4790 /* 4791 * If the internal narrow cable is reversed all of the SCSI_CTRL 4792 * register signals will be set. Check for and return an error if 4793 * this condition is found. 4794 */ 4795 if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) { 4796 asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE; 4797 return ADV_ERROR; 4798 } 4799 4800 /* 4801 * If this is a differential board and a single-ended device 4802 * is attached to one of the connectors, return an error. 4803 */ 4804 if ((scsi_cfg1 & DIFF_MODE) && (scsi_cfg1 & DIFF_SENSE) == 0) { 4805 asc_dvc->err_code |= ASC_IERR_SINGLE_END_DEVICE; 4806 return ADV_ERROR; 4807 } 4808 4809 /* 4810 * If automatic termination control is enabled, then set the 4811 * termination value based on a table listed in a_condor.h. 4812 * 4813 * If manual termination was specified with an EEPROM setting 4814 * then 'termination' was set-up in AdvInitFrom3550EEPROM() and 4815 * is ready to be 'ored' into SCSI_CFG1. 4816 */ 4817 if (asc_dvc->cfg->termination == 0) { 4818 /* 4819 * The software always controls termination by setting TERM_CTL_SEL. 4820 * If TERM_CTL_SEL were set to 0, the hardware would set termination. 4821 */ 4822 asc_dvc->cfg->termination |= TERM_CTL_SEL; 4823 4824 switch (scsi_cfg1 & CABLE_DETECT) { 4825 /* TERM_CTL_H: on, TERM_CTL_L: on */ 4826 case 0x3: 4827 case 0x7: 4828 case 0xB: 4829 case 0xD: 4830 case 0xE: 4831 case 0xF: 4832 asc_dvc->cfg->termination |= (TERM_CTL_H | TERM_CTL_L); 4833 break; 4834 4835 /* TERM_CTL_H: on, TERM_CTL_L: off */ 4836 case 0x1: 4837 case 0x5: 4838 case 0x9: 4839 case 0xA: 4840 case 0xC: 4841 asc_dvc->cfg->termination |= TERM_CTL_H; 4842 break; 4843 4844 /* TERM_CTL_H: off, TERM_CTL_L: off */ 4845 case 0x2: 4846 case 0x6: 4847 break; 4848 } 4849 } 4850 4851 /* 4852 * Clear any set TERM_CTL_H and TERM_CTL_L bits. 4853 */ 4854 scsi_cfg1 &= ~TERM_CTL; 4855 4856 /* 4857 * Invert the TERM_CTL_H and TERM_CTL_L bits and then 4858 * set 'scsi_cfg1'. The TERM_POL bit does not need to be 4859 * referenced, because the hardware internally inverts 4860 * the Termination High and Low bits if TERM_POL is set. 4861 */ 4862 scsi_cfg1 |= (TERM_CTL_SEL | (~asc_dvc->cfg->termination & TERM_CTL)); 4863 4864 /* 4865 * Set SCSI_CFG1 Microcode Default Value 4866 * 4867 * Set filter value and possibly modified termination control 4868 * bits in the Microcode SCSI_CFG1 Register Value. 4869 * 4870 * The microcode will set the SCSI_CFG1 register using this value 4871 * after it is started below. 4872 */ 4873 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, 4874 FLTR_DISABLE | scsi_cfg1); 4875 4876 /* 4877 * Set MEM_CFG Microcode Default Value 4878 * 4879 * The microcode will set the MEM_CFG register using this value 4880 * after it is started below. 4881 * 4882 * MEM_CFG may be accessed as a word or byte, but only bits 0-7 4883 * are defined. 4884 * 4885 * ASC-3550 has 8KB internal memory. 4886 */ 4887 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, 4888 BIOS_EN | RAM_SZ_8KB); 4889 4890 /* 4891 * Set SEL_MASK Microcode Default Value 4892 * 4893 * The microcode will set the SEL_MASK register using this value 4894 * after it is started below. 4895 */ 4896 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK, 4897 ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id)); 4898 4899 AdvBuildCarrierFreelist(asc_dvc); 4900 4901 /* 4902 * Set-up the Host->RISC Initiator Command Queue (ICQ). 4903 */ 4904 4905 if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL) { 4906 asc_dvc->err_code |= ASC_IERR_NO_CARRIER; 4907 return ADV_ERROR; 4908 } 4909 asc_dvc->carr_freelist = (ADV_CARR_T *) 4910 ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa)); 4911 4912 /* 4913 * The first command issued will be placed in the stopper carrier. 4914 */ 4915 asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); 4916 4917 /* 4918 * Set RISC ICQ physical address start value. 4919 */ 4920 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa); 4921 4922 /* 4923 * Set-up the RISC->Host Initiator Response Queue (IRQ). 4924 */ 4925 if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL) { 4926 asc_dvc->err_code |= ASC_IERR_NO_CARRIER; 4927 return ADV_ERROR; 4928 } 4929 asc_dvc->carr_freelist = (ADV_CARR_T *) 4930 ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa)); 4931 4932 /* 4933 * The first command completed by the RISC will be placed in 4934 * the stopper. 4935 * 4936 * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is 4937 * completed the RISC will set the ASC_RQ_STOPPER bit. 4938 */ 4939 asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); 4940 4941 /* 4942 * Set RISC IRQ physical address start value. 4943 */ 4944 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa); 4945 asc_dvc->carr_pending_cnt = 0; 4946 4947 AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES, 4948 (ADV_INTR_ENABLE_HOST_INTR | 4949 ADV_INTR_ENABLE_GLOBAL_INTR)); 4950 4951 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word); 4952 AdvWriteWordRegister(iop_base, IOPW_PC, word); 4953 4954 /* finally, finally, gentlemen, start your engine */ 4955 AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN); 4956 4957 /* 4958 * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus 4959 * Resets should be performed. The RISC has to be running 4960 * to issue a SCSI Bus Reset. 4961 */ 4962 if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) { 4963 /* 4964 * If the BIOS Signature is present in memory, restore the 4965 * BIOS Handshake Configuration Table and do not perform 4966 * a SCSI Bus Reset. 4967 */ 4968 if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == 4969 0x55AA) { 4970 /* 4971 * Restore per TID negotiated values. 4972 */ 4973 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); 4974 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); 4975 AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, 4976 tagqng_able); 4977 for (tid = 0; tid <= ADV_MAX_TID; tid++) { 4978 AdvWriteByteLram(iop_base, 4979 ASC_MC_NUMBER_OF_MAX_CMD + tid, 4980 max_cmd[tid]); 4981 } 4982 } else { 4983 if (AdvResetSB(asc_dvc) != ADV_TRUE) { 4984 warn_code = ASC_WARN_BUSRESET_ERROR; 4985 } 4986 } 4987 } 4988 4989 return warn_code; 4990} 4991 4992/* 4993 * Initialize the ASC-38C0800. 4994 * 4995 * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. 4996 * 4997 * For a non-fatal error return a warning code. If there are no warnings 4998 * then 0 is returned. 4999 * 5000 * Needed after initialization for error recovery. 5001 */ 5002static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc) 5003{ 5004 const struct firmware *fw; 5005 const char fwname[] = "advansys/38C0800.bin"; 5006 AdvPortAddr iop_base; 5007 ushort warn_code; 5008 int begin_addr; 5009 int end_addr; 5010 ushort code_sum; 5011 int word; 5012 int i; 5013 int err; 5014 unsigned long chksum; 5015 ushort scsi_cfg1; 5016 uchar byte; 5017 uchar tid; 5018 ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */ 5019 ushort wdtr_able, sdtr_able, tagqng_able; 5020 uchar max_cmd[ADV_MAX_TID + 1]; 5021 5022 /* If there is already an error, don't continue. */ 5023 if (asc_dvc->err_code != 0) 5024 return ADV_ERROR; 5025 5026 /* 5027 * The caller must set 'chip_type' to ADV_CHIP_ASC38C0800. 5028 */ 5029 if (asc_dvc->chip_type != ADV_CHIP_ASC38C0800) { 5030 asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE; 5031 return ADV_ERROR; 5032 } 5033 5034 warn_code = 0; 5035 iop_base = asc_dvc->iop_base; 5036 5037 /* 5038 * Save the RISC memory BIOS region before writing the microcode. 5039 * The BIOS may already be loaded and using its RISC LRAM region 5040 * so its region must be saved and restored. 5041 * 5042 * Note: This code makes the assumption, which is currently true, 5043 * that a chip reset does not clear RISC LRAM. 5044 */ 5045 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { 5046 AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), 5047 bios_mem[i]); 5048 } 5049 5050 /* 5051 * Save current per TID negotiated values. 5052 */ 5053 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); 5054 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); 5055 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); 5056 for (tid = 0; tid <= ADV_MAX_TID; tid++) { 5057 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, 5058 max_cmd[tid]); 5059 } 5060 5061 /* 5062 * RAM BIST (RAM Built-In Self Test) 5063 * 5064 * Address : I/O base + offset 0x38h register (byte). 5065 * Function: Bit 7-6(RW) : RAM mode 5066 * Normal Mode : 0x00 5067 * Pre-test Mode : 0x40 5068 * RAM Test Mode : 0x80 5069 * Bit 5 : unused 5070 * Bit 4(RO) : Done bit 5071 * Bit 3-0(RO) : Status 5072 * Host Error : 0x08 5073 * Int_RAM Error : 0x04 5074 * RISC Error : 0x02 5075 * SCSI Error : 0x01 5076 * No Error : 0x00 5077 * 5078 * Note: RAM BIST code should be put right here, before loading the 5079 * microcode and after saving the RISC memory BIOS region. 5080 */ 5081 5082 /* 5083 * LRAM Pre-test 5084 * 5085 * Write PRE_TEST_MODE (0x40) to register and wait for 10 milliseconds. 5086 * If Done bit not set or low nibble not PRE_TEST_VALUE (0x05), return 5087 * an error. Reset to NORMAL_MODE (0x00) and do again. If cannot reset 5088 * to NORMAL_MODE, return an error too. 5089 */ 5090 for (i = 0; i < 2; i++) { 5091 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, PRE_TEST_MODE); 5092 mdelay(10); /* Wait for 10ms before reading back. */ 5093 byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); 5094 if ((byte & RAM_TEST_DONE) == 0 5095 || (byte & 0x0F) != PRE_TEST_VALUE) { 5096 asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; 5097 return ADV_ERROR; 5098 } 5099 5100 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); 5101 mdelay(10); /* Wait for 10ms before reading back. */ 5102 if (AdvReadByteRegister(iop_base, IOPB_RAM_BIST) 5103 != NORMAL_VALUE) { 5104 asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; 5105 return ADV_ERROR; 5106 } 5107 } 5108 5109 /* 5110 * LRAM Test - It takes about 1.5 ms to run through the test. 5111 * 5112 * Write RAM_TEST_MODE (0x80) to register and wait for 10 milliseconds. 5113 * If Done bit not set or Status not 0, save register byte, set the 5114 * err_code, and return an error. 5115 */ 5116 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, RAM_TEST_MODE); 5117 mdelay(10); /* Wait for 10ms before checking status. */ 5118 5119 byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); 5120 if ((byte & RAM_TEST_DONE) == 0 || (byte & RAM_TEST_STATUS) != 0) { 5121 /* Get here if Done bit not set or Status not 0. */ 5122 asc_dvc->bist_err_code = byte; /* for BIOS display message */ 5123 asc_dvc->err_code = ASC_IERR_BIST_RAM_TEST; 5124 return ADV_ERROR; 5125 } 5126 5127 /* We need to reset back to normal mode after LRAM test passes. */ 5128 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); 5129 5130 err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); 5131 if (err) { 5132 printk(KERN_ERR "Failed to load image \"%s\" err %d\n", 5133 fwname, err); 5134 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; 5135 return err; 5136 } 5137 if (fw->size < 4) { 5138 printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", 5139 fw->size, fwname); 5140 release_firmware(fw); 5141 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; 5142 return -EINVAL; 5143 } 5144 chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | 5145 (fw->data[1] << 8) | fw->data[0]; 5146 asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4], 5147 fw->size - 4, ADV_38C0800_MEMSIZE, 5148 chksum); 5149 release_firmware(fw); 5150 if (asc_dvc->err_code) 5151 return ADV_ERROR; 5152 5153 /* 5154 * Restore the RISC memory BIOS region. 5155 */ 5156 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { 5157 AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), 5158 bios_mem[i]); 5159 } 5160 5161 /* 5162 * Calculate and write the microcode code checksum to the microcode 5163 * code checksum location ASC_MC_CODE_CHK_SUM (0x2C). 5164 */ 5165 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr); 5166 AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr); 5167 code_sum = 0; 5168 AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr); 5169 for (word = begin_addr; word < end_addr; word += 2) { 5170 code_sum += AdvReadWordAutoIncLram(iop_base); 5171 } 5172 AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum); 5173 5174 /* 5175 * Read microcode version and date. 5176 */ 5177 AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, 5178 asc_dvc->cfg->mcode_date); 5179 AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, 5180 asc_dvc->cfg->mcode_version); 5181 5182 /* 5183 * Set the chip type to indicate the ASC38C0800. 5184 */ 5185 AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC38C0800); 5186 5187 /* 5188 * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register. 5189 * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current 5190 * cable detection and then we are able to read C_DET[3:0]. 5191 * 5192 * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1 5193 * Microcode Default Value' section below. 5194 */ 5195 scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); 5196 AdvWriteWordRegister(iop_base, IOPW_SCSI_CFG1, 5197 scsi_cfg1 | DIS_TERM_DRV); 5198 5199 /* 5200 * If the PCI Configuration Command Register "Parity Error Response 5201 * Control" Bit was clear (0), then set the microcode variable 5202 * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode 5203 * to ignore DMA parity errors. 5204 */ 5205 if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) { 5206 AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); 5207 word |= CONTROL_FLAG_IGNORE_PERR; 5208 AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); 5209 } 5210 5211 /* 5212 * For ASC-38C0800, set FIFO_THRESH_80B [6:4] bits and START_CTL_TH [3:2] 5213 * bits for the default FIFO threshold. 5214 * 5215 * Note: ASC-38C0800 FIFO threshold has been changed to 256 bytes. 5216 * 5217 * For DMA Errata #4 set the BC_THRESH_ENB bit. 5218 */ 5219 AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0, 5220 BC_THRESH_ENB | FIFO_THRESH_80B | START_CTL_TH | 5221 READ_CMD_MRM); 5222 5223 /* 5224 * Microcode operating variables for WDTR, SDTR, and command tag 5225 * queuing will be set in slave_configure() based on what a 5226 * device reports it is capable of in Inquiry byte 7. 5227 * 5228 * If SCSI Bus Resets have been disabled, then directly set 5229 * SDTR and WDTR from the EEPROM configuration. This will allow 5230 * the BIOS and warm boot to work without a SCSI bus hang on 5231 * the Inquiry caused by host and target mismatched DTR values. 5232 * Without the SCSI Bus Reset, before an Inquiry a device can't 5233 * be assumed to be in Asynchronous, Narrow mode. 5234 */ 5235 if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) { 5236 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, 5237 asc_dvc->wdtr_able); 5238 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, 5239 asc_dvc->sdtr_able); 5240 } 5241 5242 /* 5243 * Set microcode operating variables for DISC and SDTR_SPEED1, 5244 * SDTR_SPEED2, SDTR_SPEED3, and SDTR_SPEED4 based on the EEPROM 5245 * configuration values. 5246 * 5247 * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2, 5248 * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them 5249 * without determining here whether the device supports SDTR. 5250 */ 5251 AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, 5252 asc_dvc->cfg->disc_enable); 5253 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, asc_dvc->sdtr_speed1); 5254 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, asc_dvc->sdtr_speed2); 5255 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, asc_dvc->sdtr_speed3); 5256 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, asc_dvc->sdtr_speed4); 5257 5258 /* 5259 * Set SCSI_CFG0 Microcode Default Value. 5260 * 5261 * The microcode will set the SCSI_CFG0 register using this value 5262 * after it is started below. 5263 */ 5264 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0, 5265 PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN | 5266 asc_dvc->chip_scsi_id); 5267 5268 /* 5269 * Determine SCSI_CFG1 Microcode Default Value. 5270 * 5271 * The microcode will set the SCSI_CFG1 register using this value 5272 * after it is started below. 5273 */ 5274 5275 /* Read current SCSI_CFG1 Register value. */ 5276 scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); 5277 5278 /* 5279 * If the internal narrow cable is reversed all of the SCSI_CTRL 5280 * register signals will be set. Check for and return an error if 5281 * this condition is found. 5282 */ 5283 if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) { 5284 asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE; 5285 return ADV_ERROR; 5286 } 5287 5288 /* 5289 * All kind of combinations of devices attached to one of four 5290 * connectors are acceptable except HVD device attached. For example, 5291 * LVD device can be attached to SE connector while SE device attached 5292 * to LVD connector. If LVD device attached to SE connector, it only 5293 * runs up to Ultra speed. 5294 * 5295 * If an HVD device is attached to one of LVD connectors, return an 5296 * error. However, there is no way to detect HVD device attached to 5297 * SE connectors. 5298 */ 5299 if (scsi_cfg1 & HVD) { 5300 asc_dvc->err_code = ASC_IERR_HVD_DEVICE; 5301 return ADV_ERROR; 5302 } 5303 5304 /* 5305 * If either SE or LVD automatic termination control is enabled, then 5306 * set the termination value based on a table listed in a_condor.h. 5307 * 5308 * If manual termination was specified with an EEPROM setting then 5309 * 'termination' was set-up in AdvInitFrom38C0800EEPROM() and is ready 5310 * to be 'ored' into SCSI_CFG1. 5311 */ 5312 if ((asc_dvc->cfg->termination & TERM_SE) == 0) { 5313 /* SE automatic termination control is enabled. */ 5314 switch (scsi_cfg1 & C_DET_SE) { 5315 /* TERM_SE_HI: on, TERM_SE_LO: on */ 5316 case 0x1: 5317 case 0x2: 5318 case 0x3: 5319 asc_dvc->cfg->termination |= TERM_SE; 5320 break; 5321 5322 /* TERM_SE_HI: on, TERM_SE_LO: off */ 5323 case 0x0: 5324 asc_dvc->cfg->termination |= TERM_SE_HI; 5325 break; 5326 } 5327 } 5328 5329 if ((asc_dvc->cfg->termination & TERM_LVD) == 0) { 5330 /* LVD automatic termination control is enabled. */ 5331 switch (scsi_cfg1 & C_DET_LVD) { 5332 /* TERM_LVD_HI: on, TERM_LVD_LO: on */ 5333 case 0x4: 5334 case 0x8: 5335 case 0xC: 5336 asc_dvc->cfg->termination |= TERM_LVD; 5337 break; 5338 5339 /* TERM_LVD_HI: off, TERM_LVD_LO: off */ 5340 case 0x0: 5341 break; 5342 } 5343 } 5344 5345 /* 5346 * Clear any set TERM_SE and TERM_LVD bits. 5347 */ 5348 scsi_cfg1 &= (~TERM_SE & ~TERM_LVD); 5349 5350 /* 5351 * Invert the TERM_SE and TERM_LVD bits and then set 'scsi_cfg1'. 5352 */ 5353 scsi_cfg1 |= (~asc_dvc->cfg->termination & 0xF0); 5354 5355 /* 5356 * Clear BIG_ENDIAN, DIS_TERM_DRV, Terminator Polarity and HVD/LVD/SE 5357 * bits and set possibly modified termination control bits in the 5358 * Microcode SCSI_CFG1 Register Value. 5359 */ 5360 scsi_cfg1 &= (~BIG_ENDIAN & ~DIS_TERM_DRV & ~TERM_POL & ~HVD_LVD_SE); 5361 5362 /* 5363 * Set SCSI_CFG1 Microcode Default Value 5364 * 5365 * Set possibly modified termination control and reset DIS_TERM_DRV 5366 * bits in the Microcode SCSI_CFG1 Register Value. 5367 * 5368 * The microcode will set the SCSI_CFG1 register using this value 5369 * after it is started below. 5370 */ 5371 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, scsi_cfg1); 5372 5373 /* 5374 * Set MEM_CFG Microcode Default Value 5375 * 5376 * The microcode will set the MEM_CFG register using this value 5377 * after it is started below. 5378 * 5379 * MEM_CFG may be accessed as a word or byte, but only bits 0-7 5380 * are defined. 5381 * 5382 * ASC-38C0800 has 16KB internal memory. 5383 */ 5384 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, 5385 BIOS_EN | RAM_SZ_16KB); 5386 5387 /* 5388 * Set SEL_MASK Microcode Default Value 5389 * 5390 * The microcode will set the SEL_MASK register using this value 5391 * after it is started below. 5392 */ 5393 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK, 5394 ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id)); 5395 5396 AdvBuildCarrierFreelist(asc_dvc); 5397 5398 /* 5399 * Set-up the Host->RISC Initiator Command Queue (ICQ). 5400 */ 5401 5402 if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL) { 5403 asc_dvc->err_code |= ASC_IERR_NO_CARRIER; 5404 return ADV_ERROR; 5405 } 5406 asc_dvc->carr_freelist = (ADV_CARR_T *) 5407 ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa)); 5408 5409 /* 5410 * The first command issued will be placed in the stopper carrier. 5411 */ 5412 asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); 5413 5414 /* 5415 * Set RISC ICQ physical address start value. 5416 * carr_pa is LE, must be native before write 5417 */ 5418 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa); 5419 5420 /* 5421 * Set-up the RISC->Host Initiator Response Queue (IRQ). 5422 */ 5423 if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL) { 5424 asc_dvc->err_code |= ASC_IERR_NO_CARRIER; 5425 return ADV_ERROR; 5426 } 5427 asc_dvc->carr_freelist = (ADV_CARR_T *) 5428 ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa)); 5429 5430 /* 5431 * The first command completed by the RISC will be placed in 5432 * the stopper. 5433 * 5434 * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is 5435 * completed the RISC will set the ASC_RQ_STOPPER bit. 5436 */ 5437 asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); 5438 5439 /* 5440 * Set RISC IRQ physical address start value. 5441 * 5442 * carr_pa is LE, must be native before write * 5443 */ 5444 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa); 5445 asc_dvc->carr_pending_cnt = 0; 5446 5447 AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES, 5448 (ADV_INTR_ENABLE_HOST_INTR | 5449 ADV_INTR_ENABLE_GLOBAL_INTR)); 5450 5451 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word); 5452 AdvWriteWordRegister(iop_base, IOPW_PC, word); 5453 5454 /* finally, finally, gentlemen, start your engine */ 5455 AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN); 5456 5457 /* 5458 * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus 5459 * Resets should be performed. The RISC has to be running 5460 * to issue a SCSI Bus Reset. 5461 */ 5462 if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) { 5463 /* 5464 * If the BIOS Signature is present in memory, restore the 5465 * BIOS Handshake Configuration Table and do not perform 5466 * a SCSI Bus Reset. 5467 */ 5468 if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == 5469 0x55AA) { 5470 /* 5471 * Restore per TID negotiated values. 5472 */ 5473 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); 5474 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); 5475 AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, 5476 tagqng_able); 5477 for (tid = 0; tid <= ADV_MAX_TID; tid++) { 5478 AdvWriteByteLram(iop_base, 5479 ASC_MC_NUMBER_OF_MAX_CMD + tid, 5480 max_cmd[tid]); 5481 } 5482 } else { 5483 if (AdvResetSB(asc_dvc) != ADV_TRUE) { 5484 warn_code = ASC_WARN_BUSRESET_ERROR; 5485 } 5486 } 5487 } 5488 5489 return warn_code; 5490} 5491 5492/* 5493 * Initialize the ASC-38C1600. 5494 * 5495 * On failure set the ASC_DVC_VAR field 'err_code' and return ADV_ERROR. 5496 * 5497 * For a non-fatal error return a warning code. If there are no warnings 5498 * then 0 is returned. 5499 * 5500 * Needed after initialization for error recovery. 5501 */ 5502static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc) 5503{ 5504 const struct firmware *fw; 5505 const char fwname[] = "advansys/38C1600.bin"; 5506 AdvPortAddr iop_base; 5507 ushort warn_code; 5508 int begin_addr; 5509 int end_addr; 5510 ushort code_sum; 5511 long word; 5512 int i; 5513 int err; 5514 unsigned long chksum; 5515 ushort scsi_cfg1; 5516 uchar byte; 5517 uchar tid; 5518 ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */ 5519 ushort wdtr_able, sdtr_able, ppr_able, tagqng_able; 5520 uchar max_cmd[ASC_MAX_TID + 1]; 5521 5522 /* If there is already an error, don't continue. */ 5523 if (asc_dvc->err_code != 0) { 5524 return ADV_ERROR; 5525 } 5526 5527 /* 5528 * The caller must set 'chip_type' to ADV_CHIP_ASC38C1600. 5529 */ 5530 if (asc_dvc->chip_type != ADV_CHIP_ASC38C1600) { 5531 asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE; 5532 return ADV_ERROR; 5533 } 5534 5535 warn_code = 0; 5536 iop_base = asc_dvc->iop_base; 5537 5538 /* 5539 * Save the RISC memory BIOS region before writing the microcode. 5540 * The BIOS may already be loaded and using its RISC LRAM region 5541 * so its region must be saved and restored. 5542 * 5543 * Note: This code makes the assumption, which is currently true, 5544 * that a chip reset does not clear RISC LRAM. 5545 */ 5546 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { 5547 AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), 5548 bios_mem[i]); 5549 } 5550 5551 /* 5552 * Save current per TID negotiated values. 5553 */ 5554 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); 5555 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); 5556 AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); 5557 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); 5558 for (tid = 0; tid <= ASC_MAX_TID; tid++) { 5559 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, 5560 max_cmd[tid]); 5561 } 5562 5563 /* 5564 * RAM BIST (Built-In Self Test) 5565 * 5566 * Address : I/O base + offset 0x38h register (byte). 5567 * Function: Bit 7-6(RW) : RAM mode 5568 * Normal Mode : 0x00 5569 * Pre-test Mode : 0x40 5570 * RAM Test Mode : 0x80 5571 * Bit 5 : unused 5572 * Bit 4(RO) : Done bit 5573 * Bit 3-0(RO) : Status 5574 * Host Error : 0x08 5575 * Int_RAM Error : 0x04 5576 * RISC Error : 0x02 5577 * SCSI Error : 0x01 5578 * No Error : 0x00 5579 * 5580 * Note: RAM BIST code should be put right here, before loading the 5581 * microcode and after saving the RISC memory BIOS region. 5582 */ 5583 5584 /* 5585 * LRAM Pre-test 5586 * 5587 * Write PRE_TEST_MODE (0x40) to register and wait for 10 milliseconds. 5588 * If Done bit not set or low nibble not PRE_TEST_VALUE (0x05), return 5589 * an error. Reset to NORMAL_MODE (0x00) and do again. If cannot reset 5590 * to NORMAL_MODE, return an error too. 5591 */ 5592 for (i = 0; i < 2; i++) { 5593 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, PRE_TEST_MODE); 5594 mdelay(10); /* Wait for 10ms before reading back. */ 5595 byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); 5596 if ((byte & RAM_TEST_DONE) == 0 5597 || (byte & 0x0F) != PRE_TEST_VALUE) { 5598 asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; 5599 return ADV_ERROR; 5600 } 5601 5602 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); 5603 mdelay(10); /* Wait for 10ms before reading back. */ 5604 if (AdvReadByteRegister(iop_base, IOPB_RAM_BIST) 5605 != NORMAL_VALUE) { 5606 asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; 5607 return ADV_ERROR; 5608 } 5609 } 5610 5611 /* 5612 * LRAM Test - It takes about 1.5 ms to run through the test. 5613 * 5614 * Write RAM_TEST_MODE (0x80) to register and wait for 10 milliseconds. 5615 * If Done bit not set or Status not 0, save register byte, set the 5616 * err_code, and return an error. 5617 */ 5618 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, RAM_TEST_MODE); 5619 mdelay(10); /* Wait for 10ms before checking status. */ 5620 5621 byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); 5622 if ((byte & RAM_TEST_DONE) == 0 || (byte & RAM_TEST_STATUS) != 0) { 5623 /* Get here if Done bit not set or Status not 0. */ 5624 asc_dvc->bist_err_code = byte; /* for BIOS display message */ 5625 asc_dvc->err_code = ASC_IERR_BIST_RAM_TEST; 5626 return ADV_ERROR; 5627 } 5628 5629 /* We need to reset back to normal mode after LRAM test passes. */ 5630 AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); 5631 5632 err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); 5633 if (err) { 5634 printk(KERN_ERR "Failed to load image \"%s\" err %d\n", 5635 fwname, err); 5636 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; 5637 return err; 5638 } 5639 if (fw->size < 4) { 5640 printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", 5641 fw->size, fwname); 5642 release_firmware(fw); 5643 asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; 5644 return -EINVAL; 5645 } 5646 chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | 5647 (fw->data[1] << 8) | fw->data[0]; 5648 asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4], 5649 fw->size - 4, ADV_38C1600_MEMSIZE, 5650 chksum); 5651 release_firmware(fw); 5652 if (asc_dvc->err_code) 5653 return ADV_ERROR; 5654 5655 /* 5656 * Restore the RISC memory BIOS region. 5657 */ 5658 for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { 5659 AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), 5660 bios_mem[i]); 5661 } 5662 5663 /* 5664 * Calculate and write the microcode code checksum to the microcode 5665 * code checksum location ASC_MC_CODE_CHK_SUM (0x2C). 5666 */ 5667 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr); 5668 AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr); 5669 code_sum = 0; 5670 AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr); 5671 for (word = begin_addr; word < end_addr; word += 2) { 5672 code_sum += AdvReadWordAutoIncLram(iop_base); 5673 } 5674 AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum); 5675 5676 /* 5677 * Read microcode version and date. 5678 */ 5679 AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, 5680 asc_dvc->cfg->mcode_date); 5681 AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, 5682 asc_dvc->cfg->mcode_version); 5683 5684 /* 5685 * Set the chip type to indicate the ASC38C1600. 5686 */ 5687 AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC38C1600); 5688 5689 /* 5690 * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register. 5691 * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current 5692 * cable detection and then we are able to read C_DET[3:0]. 5693 * 5694 * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1 5695 * Microcode Default Value' section below. 5696 */ 5697 scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); 5698 AdvWriteWordRegister(iop_base, IOPW_SCSI_CFG1, 5699 scsi_cfg1 | DIS_TERM_DRV); 5700 5701 /* 5702 * If the PCI Configuration Command Register "Parity Error Response 5703 * Control" Bit was clear (0), then set the microcode variable 5704 * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode 5705 * to ignore DMA parity errors. 5706 */ 5707 if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) { 5708 AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); 5709 word |= CONTROL_FLAG_IGNORE_PERR; 5710 AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); 5711 } 5712 5713 /* 5714 * If the BIOS control flag AIPP (Asynchronous Information 5715 * Phase Protection) disable bit is not set, then set the firmware 5716 * 'control_flag' CONTROL_FLAG_ENABLE_AIPP bit to enable 5717 * AIPP checking and encoding. 5718 */ 5719 if ((asc_dvc->bios_ctrl & BIOS_CTRL_AIPP_DIS) == 0) { 5720 AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); 5721 word |= CONTROL_FLAG_ENABLE_AIPP; 5722 AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); 5723 } 5724 5725 /* 5726 * For ASC-38C1600 use DMA_CFG0 default values: FIFO_THRESH_80B [6:4], 5727 * and START_CTL_TH [3:2]. 5728 */ 5729 AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0, 5730 FIFO_THRESH_80B | START_CTL_TH | READ_CMD_MRM); 5731 5732 /* 5733 * Microcode operating variables for WDTR, SDTR, and command tag 5734 * queuing will be set in slave_configure() based on what a 5735 * device reports it is capable of in Inquiry byte 7. 5736 * 5737 * If SCSI Bus Resets have been disabled, then directly set 5738 * SDTR and WDTR from the EEPROM configuration. This will allow 5739 * the BIOS and warm boot to work without a SCSI bus hang on 5740 * the Inquiry caused by host and target mismatched DTR values. 5741 * Without the SCSI Bus Reset, before an Inquiry a device can't 5742 * be assumed to be in Asynchronous, Narrow mode. 5743 */ 5744 if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) { 5745 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, 5746 asc_dvc->wdtr_able); 5747 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, 5748 asc_dvc->sdtr_able); 5749 } 5750 5751 /* 5752 * Set microcode operating variables for DISC and SDTR_SPEED1, 5753 * SDTR_SPEED2, SDTR_SPEED3, and SDTR_SPEED4 based on the EEPROM 5754 * configuration values. 5755 * 5756 * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2, 5757 * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them 5758 * without determining here whether the device supports SDTR. 5759 */ 5760 AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, 5761 asc_dvc->cfg->disc_enable); 5762 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, asc_dvc->sdtr_speed1); 5763 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, asc_dvc->sdtr_speed2); 5764 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, asc_dvc->sdtr_speed3); 5765 AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, asc_dvc->sdtr_speed4); 5766 5767 /* 5768 * Set SCSI_CFG0 Microcode Default Value. 5769 * 5770 * The microcode will set the SCSI_CFG0 register using this value 5771 * after it is started below. 5772 */ 5773 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0, 5774 PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN | 5775 asc_dvc->chip_scsi_id); 5776 5777 /* 5778 * Calculate SCSI_CFG1 Microcode Default Value. 5779 * 5780 * The microcode will set the SCSI_CFG1 register using this value 5781 * after it is started below. 5782 * 5783 * Each ASC-38C1600 function has only two cable detect bits. 5784 * The bus mode override bits are in IOPB_SOFT_OVER_WR. 5785 */ 5786 scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); 5787 5788 /* 5789 * If the cable is reversed all of the SCSI_CTRL register signals 5790 * will be set. Check for and return an error if this condition is 5791 * found. 5792 */ 5793 if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) { 5794 asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE; 5795 return ADV_ERROR; 5796 } 5797 5798 /* 5799 * Each ASC-38C1600 function has two connectors. Only an HVD device 5800 * can not be connected to either connector. An LVD device or SE device 5801 * may be connected to either connecor. If an SE device is connected, 5802 * then at most Ultra speed (20 Mhz) can be used on both connectors. 5803 * 5804 * If an HVD device is attached, return an error. 5805 */ 5806 if (scsi_cfg1 & HVD) { 5807 asc_dvc->err_code |= ASC_IERR_HVD_DEVICE; 5808 return ADV_ERROR; 5809 } 5810 5811 /* 5812 * Each function in the ASC-38C1600 uses only the SE cable detect and 5813 * termination because there are two connectors for each function. Each 5814 * function may use either LVD or SE mode. Corresponding the SE automatic 5815 * termination control EEPROM bits are used for each function. Each 5816 * function has its own EEPROM. If SE automatic control is enabled for 5817 * the function, then set the termination value based on a table listed 5818 * in a_condor.h. 5819 * 5820 * If manual termination is specified in the EEPROM for the function, 5821 * then 'termination' was set-up in AscInitFrom38C1600EEPROM() and is 5822 * ready to be 'ored' into SCSI_CFG1. 5823 */ 5824 if ((asc_dvc->cfg->termination & TERM_SE) == 0) { 5825 struct pci_dev *pdev = adv_dvc_to_pdev(asc_dvc); 5826 /* SE automatic termination control is enabled. */ 5827 switch (scsi_cfg1 & C_DET_SE) { 5828 /* TERM_SE_HI: on, TERM_SE_LO: on */ 5829 case 0x1: 5830 case 0x2: 5831 case 0x3: 5832 asc_dvc->cfg->termination |= TERM_SE; 5833 break; 5834 5835 case 0x0: 5836 if (PCI_FUNC(pdev->devfn) == 0) { 5837 /* Function 0 - TERM_SE_HI: off, TERM_SE_LO: off */ 5838 } else { 5839 /* Function 1 - TERM_SE_HI: on, TERM_SE_LO: off */ 5840 asc_dvc->cfg->termination |= TERM_SE_HI; 5841 } 5842 break; 5843 } 5844 } 5845 5846 /* 5847 * Clear any set TERM_SE bits. 5848 */ 5849 scsi_cfg1 &= ~TERM_SE; 5850 5851 /* 5852 * Invert the TERM_SE bits and then set 'scsi_cfg1'. 5853 */ 5854 scsi_cfg1 |= (~asc_dvc->cfg->termination & TERM_SE); 5855 5856 /* 5857 * Clear Big Endian and Terminator Polarity bits and set possibly 5858 * modified termination control bits in the Microcode SCSI_CFG1 5859 * Register Value. 5860 * 5861 * Big Endian bit is not used even on big endian machines. 5862 */ 5863 scsi_cfg1 &= (~BIG_ENDIAN & ~DIS_TERM_DRV & ~TERM_POL); 5864 5865 /* 5866 * Set SCSI_CFG1 Microcode Default Value 5867 * 5868 * Set possibly modified termination control bits in the Microcode 5869 * SCSI_CFG1 Register Value. 5870 * 5871 * The microcode will set the SCSI_CFG1 register using this value 5872 * after it is started below. 5873 */ 5874 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, scsi_cfg1); 5875 5876 /* 5877 * Set MEM_CFG Microcode Default Value 5878 * 5879 * The microcode will set the MEM_CFG register using this value 5880 * after it is started below. 5881 * 5882 * MEM_CFG may be accessed as a word or byte, but only bits 0-7 5883 * are defined. 5884 * 5885 * ASC-38C1600 has 32KB internal memory. 5886 * 5887 * XXX - Since ASC38C1600 Rev.3 has a Local RAM failure issue, we come 5888 * out a special 16K Adv Library and Microcode version. After the issue 5889 * resolved, we should turn back to the 32K support. Both a_condor.h and 5890 * mcode.sas files also need to be updated. 5891 * 5892 * AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, 5893 * BIOS_EN | RAM_SZ_32KB); 5894 */ 5895 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, 5896 BIOS_EN | RAM_SZ_16KB); 5897 5898 /* 5899 * Set SEL_MASK Microcode Default Value 5900 * 5901 * The microcode will set the SEL_MASK register using this value 5902 * after it is started below. 5903 */ 5904 AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK, 5905 ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id)); 5906 5907 AdvBuildCarrierFreelist(asc_dvc); 5908 5909 /* 5910 * Set-up the Host->RISC Initiator Command Queue (ICQ). 5911 */ 5912 if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL) { 5913 asc_dvc->err_code |= ASC_IERR_NO_CARRIER; 5914 return ADV_ERROR; 5915 } 5916 asc_dvc->carr_freelist = (ADV_CARR_T *) 5917 ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa)); 5918 5919 /* 5920 * The first command issued will be placed in the stopper carrier. 5921 */ 5922 asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); 5923 5924 /* 5925 * Set RISC ICQ physical address start value. Initialize the 5926 * COMMA register to the same value otherwise the RISC will 5927 * prematurely detect a command is available. 5928 */ 5929 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa); 5930 AdvWriteDWordRegister(iop_base, IOPDW_COMMA, 5931 le32_to_cpu(asc_dvc->icq_sp->carr_pa)); 5932 5933 /* 5934 * Set-up the RISC->Host Initiator Response Queue (IRQ). 5935 */ 5936 if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL) { 5937 asc_dvc->err_code |= ASC_IERR_NO_CARRIER; 5938 return ADV_ERROR; 5939 } 5940 asc_dvc->carr_freelist = (ADV_CARR_T *) 5941 ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa)); 5942 5943 /* 5944 * The first command completed by the RISC will be placed in 5945 * the stopper. 5946 * 5947 * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is 5948 * completed the RISC will set the ASC_RQ_STOPPER bit. 5949 */ 5950 asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); 5951 5952 /* 5953 * Set RISC IRQ physical address start value. 5954 */ 5955 AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa); 5956 asc_dvc->carr_pending_cnt = 0; 5957 5958 AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES, 5959 (ADV_INTR_ENABLE_HOST_INTR | 5960 ADV_INTR_ENABLE_GLOBAL_INTR)); 5961 AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word); 5962 AdvWriteWordRegister(iop_base, IOPW_PC, word); 5963 5964 /* finally, finally, gentlemen, start your engine */ 5965 AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN); 5966 5967 /* 5968 * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus 5969 * Resets should be performed. The RISC has to be running 5970 * to issue a SCSI Bus Reset. 5971 */ 5972 if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) { 5973 /* 5974 * If the BIOS Signature is present in memory, restore the 5975 * per TID microcode operating variables. 5976 */ 5977 if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == 5978 0x55AA) { 5979 /* 5980 * Restore per TID negotiated values. 5981 */ 5982 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); 5983 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); 5984 AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); 5985 AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, 5986 tagqng_able); 5987 for (tid = 0; tid <= ASC_MAX_TID; tid++) { 5988 AdvWriteByteLram(iop_base, 5989 ASC_MC_NUMBER_OF_MAX_CMD + tid, 5990 max_cmd[tid]); 5991 } 5992 } else { 5993 if (AdvResetSB(asc_dvc) != ADV_TRUE) { 5994 warn_code = ASC_WARN_BUSRESET_ERROR; 5995 } 5996 } 5997 } 5998 5999 return warn_code; 6000} 6001 6002/* 6003 * Reset chip and SCSI Bus. 6004 * 6005 * Return Value: 6006 * ADV_TRUE(1) - Chip re-initialization and SCSI Bus Reset successful. 6007 * ADV_FALSE(0) - Chip re-initialization and SCSI Bus Reset failure. 6008 */ 6009static int AdvResetChipAndSB(ADV_DVC_VAR *asc_dvc) 6010{ 6011 int status; 6012 ushort wdtr_able, sdtr_able, tagqng_able; 6013 ushort ppr_able = 0; 6014 uchar tid, max_cmd[ADV_MAX_TID + 1]; 6015 AdvPortAddr iop_base; 6016 ushort bios_sig; 6017 6018 iop_base = asc_dvc->iop_base; 6019 6020 /* 6021 * Save current per TID negotiated values. 6022 */ 6023 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); 6024 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); 6025 if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { 6026 AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); 6027 } 6028 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); 6029 for (tid = 0; tid <= ADV_MAX_TID; tid++) { 6030 AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, 6031 max_cmd[tid]); 6032 } 6033 6034 /* 6035 * Force the AdvInitAsc3550/38C0800Driver() function to 6036 * perform a SCSI Bus Reset by clearing the BIOS signature word. 6037 * The initialization functions assumes a SCSI Bus Reset is not 6038 * needed if the BIOS signature word is present. 6039 */ 6040 AdvReadWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, bios_sig); 6041 AdvWriteWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, 0); 6042 6043 /* 6044 * Stop chip and reset it. 6045 */ 6046 AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_STOP); 6047 AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, ADV_CTRL_REG_CMD_RESET); 6048 mdelay(100); 6049 AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, 6050 ADV_CTRL_REG_CMD_WR_IO_REG); 6051 6052 /* 6053 * Reset Adv Library error code, if any, and try 6054 * re-initializing the chip. 6055 */ 6056 asc_dvc->err_code = 0; 6057 if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { 6058 status = AdvInitAsc38C1600Driver(asc_dvc); 6059 } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { 6060 status = AdvInitAsc38C0800Driver(asc_dvc); 6061 } else { 6062 status = AdvInitAsc3550Driver(asc_dvc); 6063 } 6064 6065 /* Translate initialization return value to status value. */ 6066 if (status == 0) { 6067 status = ADV_TRUE; 6068 } else { 6069 status = ADV_FALSE; 6070 } 6071 6072 /* 6073 * Restore the BIOS signature word. 6074 */ 6075 AdvWriteWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, bios_sig); 6076 6077 /* 6078 * Restore per TID negotiated values. 6079 */ 6080 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); 6081 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); 6082 if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { 6083 AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); 6084 } 6085 AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); 6086 for (tid = 0; tid <= ADV_MAX_TID; tid++) { 6087 AdvWriteByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, 6088 max_cmd[tid]); 6089 } 6090 6091 return status; 6092} 6093 6094/* 6095 * adv_async_callback() - Adv Library asynchronous event callback function. 6096 */ 6097static void adv_async_callback(ADV_DVC_VAR *adv_dvc_varp, uchar code) 6098{ 6099 switch (code) { 6100 case ADV_ASYNC_SCSI_BUS_RESET_DET: 6101 /* 6102 * The firmware detected a SCSI Bus reset. 6103 */ 6104 ASC_DBG(0, "ADV_ASYNC_SCSI_BUS_RESET_DET\n"); 6105 break; 6106 6107 case ADV_ASYNC_RDMA_FAILURE: 6108 /* 6109 * Handle RDMA failure by resetting the SCSI Bus and 6110 * possibly the chip if it is unresponsive. Log the error 6111 * with a unique code. 6112 */ 6113 ASC_DBG(0, "ADV_ASYNC_RDMA_FAILURE\n"); 6114 AdvResetChipAndSB(adv_dvc_varp); 6115 break; 6116 6117 case ADV_HOST_SCSI_BUS_RESET: 6118 /* 6119 * Host generated SCSI bus reset occurred. 6120 */ 6121 ASC_DBG(0, "ADV_HOST_SCSI_BUS_RESET\n"); 6122 break; 6123 6124 default: 6125 ASC_DBG(0, "unknown code 0x%x\n", code); 6126 break; 6127 } 6128} 6129 6130/* 6131 * adv_isr_callback() - Second Level Interrupt Handler called by AdvISR(). 6132 * 6133 * Callback function for the Wide SCSI Adv Library. 6134 */ 6135static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp) 6136{ 6137 struct asc_board *boardp; 6138 adv_req_t *reqp; 6139 adv_sgblk_t *sgblkp; 6140 struct scsi_cmnd *scp; 6141 struct Scsi_Host *shost; 6142 ADV_DCNT resid_cnt; 6143 6144 ASC_DBG(1, "adv_dvc_varp 0x%lx, scsiqp 0x%lx\n", 6145 (ulong)adv_dvc_varp, (ulong)scsiqp); 6146 ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp); 6147 6148 /* 6149 * Get the adv_req_t structure for the command that has been 6150 * completed. The adv_req_t structure actually contains the 6151 * completed ADV_SCSI_REQ_Q structure. 6152 */ 6153 reqp = (adv_req_t *)ADV_U32_TO_VADDR(scsiqp->srb_ptr); 6154 ASC_DBG(1, "reqp 0x%lx\n", (ulong)reqp); 6155 if (reqp == NULL) { 6156 ASC_PRINT("adv_isr_callback: reqp is NULL\n"); 6157 return; 6158 } 6159 6160 /* 6161 * Get the struct scsi_cmnd structure and Scsi_Host structure for the 6162 * command that has been completed. 6163 * 6164 * Note: The adv_req_t request structure and adv_sgblk_t structure, 6165 * if any, are dropped, because a board structure pointer can not be 6166 * determined. 6167 */ 6168 scp = reqp->cmndp; 6169 ASC_DBG(1, "scp 0x%p\n", scp); 6170 if (scp == NULL) { 6171 ASC_PRINT 6172 ("adv_isr_callback: scp is NULL; adv_req_t dropped.\n"); 6173 return; 6174 } 6175 ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len); 6176 6177 shost = scp->device->host; 6178 ASC_STATS(shost, callback); 6179 ASC_DBG(1, "shost 0x%p\n", shost); 6180 6181 boardp = shost_priv(shost); 6182 BUG_ON(adv_dvc_varp != &boardp->dvc_var.adv_dvc_var); 6183 6184 /* 6185 * 'done_status' contains the command's ending status. 6186 */ 6187 switch (scsiqp->done_status) { 6188 case QD_NO_ERROR: 6189 ASC_DBG(2, "QD_NO_ERROR\n"); 6190 scp->result = 0; 6191 6192 /* 6193 * Check for an underrun condition. 6194 * 6195 * If there was no error and an underrun condition, then 6196 * then return the number of underrun bytes. 6197 */ 6198 resid_cnt = le32_to_cpu(scsiqp->data_cnt); 6199 if (scsi_bufflen(scp) != 0 && resid_cnt != 0 && 6200 resid_cnt <= scsi_bufflen(scp)) { 6201 ASC_DBG(1, "underrun condition %lu bytes\n", 6202 (ulong)resid_cnt); 6203 scsi_set_resid(scp, resid_cnt); 6204 } 6205 break; 6206 6207 case QD_WITH_ERROR: 6208 ASC_DBG(2, "QD_WITH_ERROR\n"); 6209 switch (scsiqp->host_status) { 6210 case QHSTA_NO_ERROR: 6211 if (scsiqp->scsi_status == SAM_STAT_CHECK_CONDITION) { 6212 ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n"); 6213 ASC_DBG_PRT_SENSE(2, scp->sense_buffer, 6214 SCSI_SENSE_BUFFERSIZE); 6215 /* 6216 * Note: The 'status_byte()' macro used by 6217 * target drivers defined in scsi.h shifts the 6218 * status byte returned by host drivers right 6219 * by 1 bit. This is why target drivers also 6220 * use right shifted status byte definitions. 6221 * For instance target drivers use 6222 * CHECK_CONDITION, defined to 0x1, instead of 6223 * the SCSI defined check condition value of 6224 * 0x2. Host drivers are supposed to return 6225 * the status byte as it is defined by SCSI. 6226 */ 6227 scp->result = DRIVER_BYTE(DRIVER_SENSE) | 6228 STATUS_BYTE(scsiqp->scsi_status); 6229 } else { 6230 scp->result = STATUS_BYTE(scsiqp->scsi_status); 6231 } 6232 break; 6233 6234 default: 6235 /* Some other QHSTA error occurred. */ 6236 ASC_DBG(1, "host_status 0x%x\n", scsiqp->host_status); 6237 scp->result = HOST_BYTE(DID_BAD_TARGET); 6238 break; 6239 } 6240 break; 6241 6242 case QD_ABORTED_BY_HOST: 6243 ASC_DBG(1, "QD_ABORTED_BY_HOST\n"); 6244 scp->result = 6245 HOST_BYTE(DID_ABORT) | STATUS_BYTE(scsiqp->scsi_status); 6246 break; 6247 6248 default: 6249 ASC_DBG(1, "done_status 0x%x\n", scsiqp->done_status); 6250 scp->result = 6251 HOST_BYTE(DID_ERROR) | STATUS_BYTE(scsiqp->scsi_status); 6252 break; 6253 } 6254 6255 /* 6256 * If the 'init_tidmask' bit isn't already set for the target and the 6257 * current request finished normally, then set the bit for the target 6258 * to indicate that a device is present. 6259 */ 6260 if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->device->id)) == 0 && 6261 scsiqp->done_status == QD_NO_ERROR && 6262 scsiqp->host_status == QHSTA_NO_ERROR) { 6263 boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->device->id); 6264 } 6265 6266 asc_scsi_done(scp); 6267 6268 /* 6269 * Free all 'adv_sgblk_t' structures allocated for the request. 6270 */ 6271 while ((sgblkp = reqp->sgblkp) != NULL) { 6272 /* Remove 'sgblkp' from the request list. */ 6273 reqp->sgblkp = sgblkp->next_sgblkp; 6274 6275 /* Add 'sgblkp' to the board free list. */ 6276 sgblkp->next_sgblkp = boardp->adv_sgblkp; 6277 boardp->adv_sgblkp = sgblkp; 6278 } 6279 6280 /* 6281 * Free the adv_req_t structure used with the command by adding 6282 * it back to the board free list. 6283 */ 6284 reqp->next_reqp = boardp->adv_reqp; 6285 boardp->adv_reqp = reqp; 6286 6287 ASC_DBG(1, "done\n"); 6288} 6289 6290/* 6291 * Adv Library Interrupt Service Routine 6292 * 6293 * This function is called by a driver's interrupt service routine. 6294 * The function disables and re-enables interrupts. 6295 * 6296 * When a microcode idle command is completed, the ADV_DVC_VAR 6297 * 'idle_cmd_done' field is set to ADV_TRUE. 6298 * 6299 * Note: AdvISR() can be called when interrupts are disabled or even 6300 * when there is no hardware interrupt condition present. It will 6301 * always check for completed idle commands and microcode requests. 6302 * This is an important feature that shouldn't be changed because it 6303 * allows commands to be completed from polling mode loops. 6304 * 6305 * Return: 6306 * ADV_TRUE(1) - interrupt was pending 6307 * ADV_FALSE(0) - no interrupt was pending 6308 */ 6309static int AdvISR(ADV_DVC_VAR *asc_dvc) 6310{ 6311 AdvPortAddr iop_base; 6312 uchar int_stat; 6313 ushort target_bit; 6314 ADV_CARR_T *free_carrp; 6315 ADV_VADDR irq_next_vpa; 6316 ADV_SCSI_REQ_Q *scsiq; 6317 6318 iop_base = asc_dvc->iop_base; 6319 6320 /* Reading the register clears the interrupt. */ 6321 int_stat = AdvReadByteRegister(iop_base, IOPB_INTR_STATUS_REG); 6322 6323 if ((int_stat & (ADV_INTR_STATUS_INTRA | ADV_INTR_STATUS_INTRB | 6324 ADV_INTR_STATUS_INTRC)) == 0) { 6325 return ADV_FALSE; 6326 } 6327 6328 /* 6329 * Notify the driver of an asynchronous microcode condition by 6330 * calling the adv_async_callback function. The function 6331 * is passed the microcode ASC_MC_INTRB_CODE byte value. 6332 */ 6333 if (int_stat & ADV_INTR_STATUS_INTRB) { 6334 uchar intrb_code; 6335 6336 AdvReadByteLram(iop_base, ASC_MC_INTRB_CODE, intrb_code); 6337 6338 if (asc_dvc->chip_type == ADV_CHIP_ASC3550 || 6339 asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { 6340 if (intrb_code == ADV_ASYNC_CARRIER_READY_FAILURE && 6341 asc_dvc->carr_pending_cnt != 0) { 6342 AdvWriteByteRegister(iop_base, IOPB_TICKLE, 6343 ADV_TICKLE_A); 6344 if (asc_dvc->chip_type == ADV_CHIP_ASC3550) { 6345 AdvWriteByteRegister(iop_base, 6346 IOPB_TICKLE, 6347 ADV_TICKLE_NOP); 6348 } 6349 } 6350 } 6351 6352 adv_async_callback(asc_dvc, intrb_code); 6353 } 6354 6355 /* 6356 * Check if the IRQ stopper carrier contains a completed request. 6357 */ 6358 while (((irq_next_vpa = 6359 le32_to_cpu(asc_dvc->irq_sp->next_vpa)) & ASC_RQ_DONE) != 0) { 6360 /* 6361 * Get a pointer to the newly completed ADV_SCSI_REQ_Q structure. 6362 * The RISC will have set 'areq_vpa' to a virtual address. 6363 * 6364 * The firmware will have copied the ASC_SCSI_REQ_Q.scsiq_ptr 6365 * field to the carrier ADV_CARR_T.areq_vpa field. The conversion 6366 * below complements the conversion of ASC_SCSI_REQ_Q.scsiq_ptr' 6367 * in AdvExeScsiQueue(). 6368 */ 6369 scsiq = (ADV_SCSI_REQ_Q *) 6370 ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->areq_vpa)); 6371 6372 /* 6373 * Request finished with good status and the queue was not 6374 * DMAed to host memory by the firmware. Set all status fields 6375 * to indicate good status. 6376 */ 6377 if ((irq_next_vpa & ASC_RQ_GOOD) != 0) { 6378 scsiq->done_status = QD_NO_ERROR; 6379 scsiq->host_status = scsiq->scsi_status = 0; 6380 scsiq->data_cnt = 0L; 6381 } 6382 6383 /* 6384 * Advance the stopper pointer to the next carrier 6385 * ignoring the lower four bits. Free the previous 6386 * stopper carrier. 6387 */ 6388 free_carrp = asc_dvc->irq_sp; 6389 asc_dvc->irq_sp = (ADV_CARR_T *) 6390 ADV_U32_TO_VADDR(ASC_GET_CARRP(irq_next_vpa)); 6391 6392 free_carrp->next_vpa = 6393 cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->carr_freelist)); 6394 asc_dvc->carr_freelist = free_carrp; 6395 asc_dvc->carr_pending_cnt--; 6396 6397 target_bit = ADV_TID_TO_TIDMASK(scsiq->target_id); 6398 6399 /* 6400 * Clear request microcode control flag. 6401 */ 6402 scsiq->cntl = 0; 6403 6404 /* 6405 * Notify the driver of the completed request by passing 6406 * the ADV_SCSI_REQ_Q pointer to its callback function. 6407 */ 6408 scsiq->a_flag |= ADV_SCSIQ_DONE; 6409 adv_isr_callback(asc_dvc, scsiq); 6410 /* 6411 * Note: After the driver callback function is called, 'scsiq' 6412 * can no longer be referenced. 6413 * 6414 * Fall through and continue processing other completed 6415 * requests... 6416 */ 6417 } 6418 return ADV_TRUE; 6419} 6420 6421static int AscSetLibErrorCode(ASC_DVC_VAR *asc_dvc, ushort err_code) 6422{ 6423 if (asc_dvc->err_code == 0) { 6424 asc_dvc->err_code = err_code; 6425 AscWriteLramWord(asc_dvc->iop_base, ASCV_ASCDVC_ERR_CODE_W, 6426 err_code); 6427 } 6428 return err_code; 6429} 6430 6431static void AscAckInterrupt(PortAddr iop_base) 6432{ 6433 uchar host_flag; 6434 uchar risc_flag; 6435 ushort loop; 6436 6437 loop = 0; 6438 do { 6439 risc_flag = AscReadLramByte(iop_base, ASCV_RISC_FLAG_B); 6440 if (loop++ > 0x7FFF) { 6441 break; 6442 } 6443 } while ((risc_flag & ASC_RISC_FLAG_GEN_INT) != 0); 6444 host_flag = 6445 AscReadLramByte(iop_base, 6446 ASCV_HOST_FLAG_B) & (~ASC_HOST_FLAG_ACK_INT); 6447 AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, 6448 (uchar)(host_flag | ASC_HOST_FLAG_ACK_INT)); 6449 AscSetChipStatus(iop_base, CIW_INT_ACK); 6450 loop = 0; 6451 while (AscGetChipStatus(iop_base) & CSW_INT_PENDING) { 6452 AscSetChipStatus(iop_base, CIW_INT_ACK); 6453 if (loop++ > 3) { 6454 break; 6455 } 6456 } 6457 AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag); 6458} 6459 6460static uchar AscGetSynPeriodIndex(ASC_DVC_VAR *asc_dvc, uchar syn_time) 6461{ 6462 const uchar *period_table; 6463 int max_index; 6464 int min_index; 6465 int i; 6466 6467 period_table = asc_dvc->sdtr_period_tbl; 6468 max_index = (int)asc_dvc->max_sdtr_index; 6469 min_index = (int)asc_dvc->min_sdtr_index; 6470 if ((syn_time <= period_table[max_index])) { 6471 for (i = min_index; i < (max_index - 1); i++) { 6472 if (syn_time <= period_table[i]) { 6473 return (uchar)i; 6474 } 6475 } 6476 return (uchar)max_index; 6477 } else { 6478 return (uchar)(max_index + 1); 6479 } 6480} 6481 6482static uchar 6483AscMsgOutSDTR(ASC_DVC_VAR *asc_dvc, uchar sdtr_period, uchar sdtr_offset) 6484{ 6485 EXT_MSG sdtr_buf; 6486 uchar sdtr_period_index; 6487 PortAddr iop_base; 6488 6489 iop_base = asc_dvc->iop_base; 6490 sdtr_buf.msg_type = EXTENDED_MESSAGE; 6491 sdtr_buf.msg_len = MS_SDTR_LEN; 6492 sdtr_buf.msg_req = EXTENDED_SDTR; 6493 sdtr_buf.xfer_period = sdtr_period; 6494 sdtr_offset &= ASC_SYN_MAX_OFFSET; 6495 sdtr_buf.req_ack_offset = sdtr_offset; 6496 sdtr_period_index = AscGetSynPeriodIndex(asc_dvc, sdtr_period); 6497 if (sdtr_period_index <= asc_dvc->max_sdtr_index) { 6498 AscMemWordCopyPtrToLram(iop_base, ASCV_MSGOUT_BEG, 6499 (uchar *)&sdtr_buf, 6500 sizeof(EXT_MSG) >> 1); 6501 return ((sdtr_period_index << 4) | sdtr_offset); 6502 } else { 6503 sdtr_buf.req_ack_offset = 0; 6504 AscMemWordCopyPtrToLram(iop_base, ASCV_MSGOUT_BEG, 6505 (uchar *)&sdtr_buf, 6506 sizeof(EXT_MSG) >> 1); 6507 return 0; 6508 } 6509} 6510 6511static uchar 6512AscCalSDTRData(ASC_DVC_VAR *asc_dvc, uchar sdtr_period, uchar syn_offset) 6513{ 6514 uchar byte; 6515 uchar sdtr_period_ix; 6516 6517 sdtr_period_ix = AscGetSynPeriodIndex(asc_dvc, sdtr_period); 6518 if (sdtr_period_ix > asc_dvc->max_sdtr_index) 6519 return 0xFF; 6520 byte = (sdtr_period_ix << 4) | (syn_offset & ASC_SYN_MAX_OFFSET); 6521 return byte; 6522} 6523 6524static int AscSetChipSynRegAtID(PortAddr iop_base, uchar id, uchar sdtr_data) 6525{ 6526 ASC_SCSI_BIT_ID_TYPE org_id; 6527 int i; 6528 int sta = TRUE; 6529 6530 AscSetBank(iop_base, 1); 6531 org_id = AscReadChipDvcID(iop_base); 6532 for (i = 0; i <= ASC_MAX_TID; i++) { 6533 if (org_id == (0x01 << i)) 6534 break; 6535 } 6536 org_id = (ASC_SCSI_BIT_ID_TYPE) i; 6537 AscWriteChipDvcID(iop_base, id); 6538 if (AscReadChipDvcID(iop_base) == (0x01 << id)) { 6539 AscSetBank(iop_base, 0); 6540 AscSetChipSyn(iop_base, sdtr_data); 6541 if (AscGetChipSyn(iop_base) != sdtr_data) { 6542 sta = FALSE; 6543 } 6544 } else { 6545 sta = FALSE; 6546 } 6547 AscSetBank(iop_base, 1); 6548 AscWriteChipDvcID(iop_base, org_id); 6549 AscSetBank(iop_base, 0); 6550 return (sta); 6551} 6552 6553static void AscSetChipSDTR(PortAddr iop_base, uchar sdtr_data, uchar tid_no) 6554{ 6555 AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data); 6556 AscPutMCodeSDTRDoneAtID(iop_base, tid_no, sdtr_data); 6557} 6558 6559static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc) 6560{ 6561 EXT_MSG ext_msg; 6562 EXT_MSG out_msg; 6563 ushort halt_q_addr; 6564 int sdtr_accept; 6565 ushort int_halt_code; 6566 ASC_SCSI_BIT_ID_TYPE scsi_busy; 6567 ASC_SCSI_BIT_ID_TYPE target_id; 6568 PortAddr iop_base; 6569 uchar tag_code; 6570 uchar q_status; 6571 uchar halt_qp; 6572 uchar sdtr_data; 6573 uchar target_ix; 6574 uchar q_cntl, tid_no; 6575 uchar cur_dvc_qng; 6576 uchar asyn_sdtr; 6577 uchar scsi_status; 6578 struct asc_board *boardp; 6579 6580 BUG_ON(!asc_dvc->drv_ptr); 6581 boardp = asc_dvc->drv_ptr; 6582 6583 iop_base = asc_dvc->iop_base; 6584 int_halt_code = AscReadLramWord(iop_base, ASCV_HALTCODE_W); 6585 6586 halt_qp = AscReadLramByte(iop_base, ASCV_CURCDB_B); 6587 halt_q_addr = ASC_QNO_TO_QADDR(halt_qp); 6588 target_ix = AscReadLramByte(iop_base, 6589 (ushort)(halt_q_addr + 6590 (ushort)ASC_SCSIQ_B_TARGET_IX)); 6591 q_cntl = AscReadLramByte(iop_base, 6592 (ushort)(halt_q_addr + (ushort)ASC_SCSIQ_B_CNTL)); 6593 tid_no = ASC_TIX_TO_TID(target_ix); 6594 target_id = (uchar)ASC_TID_TO_TARGET_ID(tid_no); 6595 if (asc_dvc->pci_fix_asyn_xfer & target_id) { 6596 asyn_sdtr = ASYN_SDTR_DATA_FIX_PCI_REV_AB; 6597 } else { 6598 asyn_sdtr = 0; 6599 } 6600 if (int_halt_code == ASC_HALT_DISABLE_ASYN_USE_SYN_FIX) { 6601 if (asc_dvc->pci_fix_asyn_xfer & target_id) { 6602 AscSetChipSDTR(iop_base, 0, tid_no); 6603 boardp->sdtr_data[tid_no] = 0; 6604 } 6605 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); 6606 return (0); 6607 } else if (int_halt_code == ASC_HALT_ENABLE_ASYN_USE_SYN_FIX) { 6608 if (asc_dvc->pci_fix_asyn_xfer & target_id) { 6609 AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); 6610 boardp->sdtr_data[tid_no] = asyn_sdtr; 6611 } 6612 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); 6613 return (0); 6614 } else if (int_halt_code == ASC_HALT_EXTMSG_IN) { 6615 AscMemWordCopyPtrFromLram(iop_base, 6616 ASCV_MSGIN_BEG, 6617 (uchar *)&ext_msg, 6618 sizeof(EXT_MSG) >> 1); 6619 6620 if (ext_msg.msg_type == EXTENDED_MESSAGE && 6621 ext_msg.msg_req == EXTENDED_SDTR && 6622 ext_msg.msg_len == MS_SDTR_LEN) { 6623 sdtr_accept = TRUE; 6624 if ((ext_msg.req_ack_offset > ASC_SYN_MAX_OFFSET)) { 6625 6626 sdtr_accept = FALSE; 6627 ext_msg.req_ack_offset = ASC_SYN_MAX_OFFSET; 6628 } 6629 if ((ext_msg.xfer_period < 6630 asc_dvc->sdtr_period_tbl[asc_dvc->min_sdtr_index]) 6631 || (ext_msg.xfer_period > 6632 asc_dvc->sdtr_period_tbl[asc_dvc-> 6633 max_sdtr_index])) { 6634 sdtr_accept = FALSE; 6635 ext_msg.xfer_period = 6636 asc_dvc->sdtr_period_tbl[asc_dvc-> 6637 min_sdtr_index]; 6638 } 6639 if (sdtr_accept) { 6640 sdtr_data = 6641 AscCalSDTRData(asc_dvc, ext_msg.xfer_period, 6642 ext_msg.req_ack_offset); 6643 if ((sdtr_data == 0xFF)) { 6644 6645 q_cntl |= QC_MSG_OUT; 6646 asc_dvc->init_sdtr &= ~target_id; 6647 asc_dvc->sdtr_done &= ~target_id; 6648 AscSetChipSDTR(iop_base, asyn_sdtr, 6649 tid_no); 6650 boardp->sdtr_data[tid_no] = asyn_sdtr; 6651 } 6652 } 6653 if (ext_msg.req_ack_offset == 0) { 6654 6655 q_cntl &= ~QC_MSG_OUT; 6656 asc_dvc->init_sdtr &= ~target_id; 6657 asc_dvc->sdtr_done &= ~target_id; 6658 AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); 6659 } else { 6660 if (sdtr_accept && (q_cntl & QC_MSG_OUT)) { 6661 q_cntl &= ~QC_MSG_OUT; 6662 asc_dvc->sdtr_done |= target_id; 6663 asc_dvc->init_sdtr |= target_id; 6664 asc_dvc->pci_fix_asyn_xfer &= 6665 ~target_id; 6666 sdtr_data = 6667 AscCalSDTRData(asc_dvc, 6668 ext_msg.xfer_period, 6669 ext_msg. 6670 req_ack_offset); 6671 AscSetChipSDTR(iop_base, sdtr_data, 6672 tid_no); 6673 boardp->sdtr_data[tid_no] = sdtr_data; 6674 } else { 6675 q_cntl |= QC_MSG_OUT; 6676 AscMsgOutSDTR(asc_dvc, 6677 ext_msg.xfer_period, 6678 ext_msg.req_ack_offset); 6679 asc_dvc->pci_fix_asyn_xfer &= 6680 ~target_id; 6681 sdtr_data = 6682 AscCalSDTRData(asc_dvc, 6683 ext_msg.xfer_period, 6684 ext_msg. 6685 req_ack_offset); 6686 AscSetChipSDTR(iop_base, sdtr_data, 6687 tid_no); 6688 boardp->sdtr_data[tid_no] = sdtr_data; 6689 asc_dvc->sdtr_done |= target_id; 6690 asc_dvc->init_sdtr |= target_id; 6691 } 6692 } 6693 6694 AscWriteLramByte(iop_base, 6695 (ushort)(halt_q_addr + 6696 (ushort)ASC_SCSIQ_B_CNTL), 6697 q_cntl); 6698 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); 6699 return (0); 6700 } else if (ext_msg.msg_type == EXTENDED_MESSAGE && 6701 ext_msg.msg_req == EXTENDED_WDTR && 6702 ext_msg.msg_len == MS_WDTR_LEN) { 6703 6704 ext_msg.wdtr_width = 0; 6705 AscMemWordCopyPtrToLram(iop_base, 6706 ASCV_MSGOUT_BEG, 6707 (uchar *)&ext_msg, 6708 sizeof(EXT_MSG) >> 1); 6709 q_cntl |= QC_MSG_OUT; 6710 AscWriteLramByte(iop_base, 6711 (ushort)(halt_q_addr + 6712 (ushort)ASC_SCSIQ_B_CNTL), 6713 q_cntl); 6714 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); 6715 return (0); 6716 } else { 6717 6718 ext_msg.msg_type = MESSAGE_REJECT; 6719 AscMemWordCopyPtrToLram(iop_base, 6720 ASCV_MSGOUT_BEG, 6721 (uchar *)&ext_msg, 6722 sizeof(EXT_MSG) >> 1); 6723 q_cntl |= QC_MSG_OUT; 6724 AscWriteLramByte(iop_base, 6725 (ushort)(halt_q_addr + 6726 (ushort)ASC_SCSIQ_B_CNTL), 6727 q_cntl); 6728 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); 6729 return (0); 6730 } 6731 } else if (int_halt_code == ASC_HALT_CHK_CONDITION) { 6732 6733 q_cntl |= QC_REQ_SENSE; 6734 6735 if ((asc_dvc->init_sdtr & target_id) != 0) { 6736 6737 asc_dvc->sdtr_done &= ~target_id; 6738 6739 sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no); 6740 q_cntl |= QC_MSG_OUT; 6741 AscMsgOutSDTR(asc_dvc, 6742 asc_dvc-> 6743 sdtr_period_tbl[(sdtr_data >> 4) & 6744 (uchar)(asc_dvc-> 6745 max_sdtr_index - 6746 1)], 6747 (uchar)(sdtr_data & (uchar) 6748 ASC_SYN_MAX_OFFSET)); 6749 } 6750 6751 AscWriteLramByte(iop_base, 6752 (ushort)(halt_q_addr + 6753 (ushort)ASC_SCSIQ_B_CNTL), q_cntl); 6754 6755 tag_code = AscReadLramByte(iop_base, 6756 (ushort)(halt_q_addr + (ushort) 6757 ASC_SCSIQ_B_TAG_CODE)); 6758 tag_code &= 0xDC; 6759 if ((asc_dvc->pci_fix_asyn_xfer & target_id) 6760 && !(asc_dvc->pci_fix_asyn_xfer_always & target_id) 6761 ) { 6762 6763 tag_code |= (ASC_TAG_FLAG_DISABLE_DISCONNECT 6764 | ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX); 6765 6766 } 6767 AscWriteLramByte(iop_base, 6768 (ushort)(halt_q_addr + 6769 (ushort)ASC_SCSIQ_B_TAG_CODE), 6770 tag_code); 6771 6772 q_status = AscReadLramByte(iop_base, 6773 (ushort)(halt_q_addr + (ushort) 6774 ASC_SCSIQ_B_STATUS)); 6775 q_status |= (QS_READY | QS_BUSY); 6776 AscWriteLramByte(iop_base, 6777 (ushort)(halt_q_addr + 6778 (ushort)ASC_SCSIQ_B_STATUS), 6779 q_status); 6780 6781 scsi_busy = AscReadLramByte(iop_base, (ushort)ASCV_SCSIBUSY_B); 6782 scsi_busy &= ~target_id; 6783 AscWriteLramByte(iop_base, (ushort)ASCV_SCSIBUSY_B, scsi_busy); 6784 6785 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); 6786 return (0); 6787 } else if (int_halt_code == ASC_HALT_SDTR_REJECTED) { 6788 6789 AscMemWordCopyPtrFromLram(iop_base, 6790 ASCV_MSGOUT_BEG, 6791 (uchar *)&out_msg, 6792 sizeof(EXT_MSG) >> 1); 6793 6794 if ((out_msg.msg_type == EXTENDED_MESSAGE) && 6795 (out_msg.msg_len == MS_SDTR_LEN) && 6796 (out_msg.msg_req == EXTENDED_SDTR)) { 6797 6798 asc_dvc->init_sdtr &= ~target_id; 6799 asc_dvc->sdtr_done &= ~target_id; 6800 AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); 6801 boardp->sdtr_data[tid_no] = asyn_sdtr; 6802 } 6803 q_cntl &= ~QC_MSG_OUT; 6804 AscWriteLramByte(iop_base, 6805 (ushort)(halt_q_addr + 6806 (ushort)ASC_SCSIQ_B_CNTL), q_cntl); 6807 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); 6808 return (0); 6809 } else if (int_halt_code == ASC_HALT_SS_QUEUE_FULL) { 6810 6811 scsi_status = AscReadLramByte(iop_base, 6812 (ushort)((ushort)halt_q_addr + 6813 (ushort) 6814 ASC_SCSIQ_SCSI_STATUS)); 6815 cur_dvc_qng = 6816 AscReadLramByte(iop_base, 6817 (ushort)((ushort)ASC_QADR_BEG + 6818 (ushort)target_ix)); 6819 if ((cur_dvc_qng > 0) && (asc_dvc->cur_dvc_qng[tid_no] > 0)) { 6820 6821 scsi_busy = AscReadLramByte(iop_base, 6822 (ushort)ASCV_SCSIBUSY_B); 6823 scsi_busy |= target_id; 6824 AscWriteLramByte(iop_base, 6825 (ushort)ASCV_SCSIBUSY_B, scsi_busy); 6826 asc_dvc->queue_full_or_busy |= target_id; 6827 6828 if (scsi_status == SAM_STAT_TASK_SET_FULL) { 6829 if (cur_dvc_qng > ASC_MIN_TAGGED_CMD) { 6830 cur_dvc_qng -= 1; 6831 asc_dvc->max_dvc_qng[tid_no] = 6832 cur_dvc_qng; 6833 6834 AscWriteLramByte(iop_base, 6835 (ushort)((ushort) 6836 ASCV_MAX_DVC_QNG_BEG 6837 + (ushort) 6838 tid_no), 6839 cur_dvc_qng); 6840 6841 /* 6842 * Set the device queue depth to the 6843 * number of active requests when the 6844 * QUEUE FULL condition was encountered. 6845 */ 6846 boardp->queue_full |= target_id; 6847 boardp->queue_full_cnt[tid_no] = 6848 cur_dvc_qng; 6849 } 6850 } 6851 } 6852 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); 6853 return (0); 6854 } 6855#if CC_VERY_LONG_SG_LIST 6856 else if (int_halt_code == ASC_HALT_HOST_COPY_SG_LIST_TO_RISC) { 6857 uchar q_no; 6858 ushort q_addr; 6859 uchar sg_wk_q_no; 6860 uchar first_sg_wk_q_no; 6861 ASC_SCSI_Q *scsiq; /* Ptr to driver request. */ 6862 ASC_SG_HEAD *sg_head; /* Ptr to driver SG request. */ 6863 ASC_SG_LIST_Q scsi_sg_q; /* Structure written to queue. */ 6864 ushort sg_list_dwords; 6865 ushort sg_entry_cnt; 6866 uchar next_qp; 6867 int i; 6868 6869 q_no = AscReadLramByte(iop_base, (ushort)ASCV_REQ_SG_LIST_QP); 6870 if (q_no == ASC_QLINK_END) 6871 return 0; 6872 6873 q_addr = ASC_QNO_TO_QADDR(q_no); 6874 6875 /* 6876 * Convert the request's SRB pointer to a host ASC_SCSI_REQ 6877 * structure pointer using a macro provided by the driver. 6878 * The ASC_SCSI_REQ pointer provides a pointer to the 6879 * host ASC_SG_HEAD structure. 6880 */ 6881 /* Read request's SRB pointer. */ 6882 scsiq = (ASC_SCSI_Q *) 6883 ASC_SRB2SCSIQ(ASC_U32_TO_VADDR(AscReadLramDWord(iop_base, 6884 (ushort) 6885 (q_addr + 6886 ASC_SCSIQ_D_SRBPTR)))); 6887 6888 /* 6889 * Get request's first and working SG queue. 6890 */ 6891 sg_wk_q_no = AscReadLramByte(iop_base, 6892 (ushort)(q_addr + 6893 ASC_SCSIQ_B_SG_WK_QP)); 6894 6895 first_sg_wk_q_no = AscReadLramByte(iop_base, 6896 (ushort)(q_addr + 6897 ASC_SCSIQ_B_FIRST_SG_WK_QP)); 6898 6899 /* 6900 * Reset request's working SG queue back to the 6901 * first SG queue. 6902 */ 6903 AscWriteLramByte(iop_base, 6904 (ushort)(q_addr + 6905 (ushort)ASC_SCSIQ_B_SG_WK_QP), 6906 first_sg_wk_q_no); 6907 6908 sg_head = scsiq->sg_head; 6909 6910 /* 6911 * Set sg_entry_cnt to the number of SG elements 6912 * that will be completed on this interrupt. 6913 * 6914 * Note: The allocated SG queues contain ASC_MAX_SG_LIST - 1 6915 * SG elements. The data_cnt and data_addr fields which 6916 * add 1 to the SG element capacity are not used when 6917 * restarting SG handling after a halt. 6918 */ 6919 if (scsiq->remain_sg_entry_cnt > (ASC_MAX_SG_LIST - 1)) { 6920 sg_entry_cnt = ASC_MAX_SG_LIST - 1; 6921 6922 /* 6923 * Keep track of remaining number of SG elements that 6924 * will need to be handled on the next interrupt. 6925 */ 6926 scsiq->remain_sg_entry_cnt -= (ASC_MAX_SG_LIST - 1); 6927 } else { 6928 sg_entry_cnt = scsiq->remain_sg_entry_cnt; 6929 scsiq->remain_sg_entry_cnt = 0; 6930 } 6931 6932 /* 6933 * Copy SG elements into the list of allocated SG queues. 6934 * 6935 * Last index completed is saved in scsiq->next_sg_index. 6936 */ 6937 next_qp = first_sg_wk_q_no; 6938 q_addr = ASC_QNO_TO_QADDR(next_qp); 6939 scsi_sg_q.sg_head_qp = q_no; 6940 scsi_sg_q.cntl = QCSG_SG_XFER_LIST; 6941 for (i = 0; i < sg_head->queue_cnt; i++) { 6942 scsi_sg_q.seq_no = i + 1; 6943 if (sg_entry_cnt > ASC_SG_LIST_PER_Q) { 6944 sg_list_dwords = (uchar)(ASC_SG_LIST_PER_Q * 2); 6945 sg_entry_cnt -= ASC_SG_LIST_PER_Q; 6946 /* 6947 * After very first SG queue RISC FW uses next 6948 * SG queue first element then checks sg_list_cnt 6949 * against zero and then decrements, so set 6950 * sg_list_cnt 1 less than number of SG elements 6951 * in each SG queue. 6952 */ 6953 scsi_sg_q.sg_list_cnt = ASC_SG_LIST_PER_Q - 1; 6954 scsi_sg_q.sg_cur_list_cnt = 6955 ASC_SG_LIST_PER_Q - 1; 6956 } else { 6957 /* 6958 * This is the last SG queue in the list of 6959 * allocated SG queues. If there are more 6960 * SG elements than will fit in the allocated 6961 * queues, then set the QCSG_SG_XFER_MORE flag. 6962 */ 6963 if (scsiq->remain_sg_entry_cnt != 0) { 6964 scsi_sg_q.cntl |= QCSG_SG_XFER_MORE; 6965 } else { 6966 scsi_sg_q.cntl |= QCSG_SG_XFER_END; 6967 } 6968 /* equals sg_entry_cnt * 2 */ 6969 sg_list_dwords = sg_entry_cnt << 1; 6970 scsi_sg_q.sg_list_cnt = sg_entry_cnt - 1; 6971 scsi_sg_q.sg_cur_list_cnt = sg_entry_cnt - 1; 6972 sg_entry_cnt = 0; 6973 } 6974 6975 scsi_sg_q.q_no = next_qp; 6976 AscMemWordCopyPtrToLram(iop_base, 6977 q_addr + ASC_SCSIQ_SGHD_CPY_BEG, 6978 (uchar *)&scsi_sg_q, 6979 sizeof(ASC_SG_LIST_Q) >> 1); 6980 6981 AscMemDWordCopyPtrToLram(iop_base, 6982 q_addr + ASC_SGQ_LIST_BEG, 6983 (uchar *)&sg_head-> 6984 sg_list[scsiq->next_sg_index], 6985 sg_list_dwords); 6986 6987 scsiq->next_sg_index += ASC_SG_LIST_PER_Q; 6988 6989 /* 6990 * If the just completed SG queue contained the 6991 * last SG element, then no more SG queues need 6992 * to be written. 6993 */ 6994 if (scsi_sg_q.cntl & QCSG_SG_XFER_END) { 6995 break; 6996 } 6997 6998 next_qp = AscReadLramByte(iop_base, 6999 (ushort)(q_addr + 7000 ASC_SCSIQ_B_FWD)); 7001 q_addr = ASC_QNO_TO_QADDR(next_qp); 7002 } 7003 7004 /* 7005 * Clear the halt condition so the RISC will be restarted 7006 * after the return. 7007 */ 7008 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); 7009 return (0); 7010 } 7011#endif /* CC_VERY_LONG_SG_LIST */ 7012 return (0); 7013} 7014 7015/* 7016 * void 7017 * DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words) 7018 * 7019 * Calling/Exit State: 7020 * none 7021 * 7022 * Description: 7023 * Input an ASC_QDONE_INFO structure from the chip 7024 */ 7025static void 7026DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words) 7027{ 7028 int i; 7029 ushort word; 7030 7031 AscSetChipLramAddr(iop_base, s_addr); 7032 for (i = 0; i < 2 * words; i += 2) { 7033 if (i == 10) { 7034 continue; 7035 } 7036 word = inpw(iop_base + IOP_RAM_DATA); 7037 inbuf[i] = word & 0xff; 7038 inbuf[i + 1] = (word >> 8) & 0xff; 7039 } 7040 ASC_DBG_PRT_HEX(2, "DvcGetQinfo", inbuf, 2 * words); 7041} 7042 7043static uchar 7044_AscCopyLramScsiDoneQ(PortAddr iop_base, 7045 ushort q_addr, 7046 ASC_QDONE_INFO *scsiq, ASC_DCNT max_dma_count) 7047{ 7048 ushort _val; 7049 uchar sg_queue_cnt; 7050 7051 DvcGetQinfo(iop_base, 7052 q_addr + ASC_SCSIQ_DONE_INFO_BEG, 7053 (uchar *)scsiq, 7054 (sizeof(ASC_SCSIQ_2) + sizeof(ASC_SCSIQ_3)) / 2); 7055 7056 _val = AscReadLramWord(iop_base, 7057 (ushort)(q_addr + (ushort)ASC_SCSIQ_B_STATUS)); 7058 scsiq->q_status = (uchar)_val; 7059 scsiq->q_no = (uchar)(_val >> 8); 7060 _val = AscReadLramWord(iop_base, 7061 (ushort)(q_addr + (ushort)ASC_SCSIQ_B_CNTL)); 7062 scsiq->cntl = (uchar)_val; 7063 sg_queue_cnt = (uchar)(_val >> 8); 7064 _val = AscReadLramWord(iop_base, 7065 (ushort)(q_addr + 7066 (ushort)ASC_SCSIQ_B_SENSE_LEN)); 7067 scsiq->sense_len = (uchar)_val; 7068 scsiq->extra_bytes = (uchar)(_val >> 8); 7069 7070 /* 7071 * Read high word of remain bytes from alternate location. 7072 */ 7073 scsiq->remain_bytes = (((ADV_DCNT)AscReadLramWord(iop_base, 7074 (ushort)(q_addr + 7075 (ushort) 7076 ASC_SCSIQ_W_ALT_DC1))) 7077 << 16); 7078 /* 7079 * Read low word of remain bytes from original location. 7080 */ 7081 scsiq->remain_bytes += AscReadLramWord(iop_base, 7082 (ushort)(q_addr + (ushort) 7083 ASC_SCSIQ_DW_REMAIN_XFER_CNT)); 7084 7085 scsiq->remain_bytes &= max_dma_count; 7086 return sg_queue_cnt; 7087} 7088 7089/* 7090 * asc_isr_callback() - Second Level Interrupt Handler called by AscISR(). 7091 * 7092 * Interrupt callback function for the Narrow SCSI Asc Library. 7093 */ 7094static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep) 7095{ 7096 struct asc_board *boardp; 7097 struct scsi_cmnd *scp; 7098 struct Scsi_Host *shost; 7099 7100 ASC_DBG(1, "asc_dvc_varp 0x%p, qdonep 0x%p\n", asc_dvc_varp, qdonep); 7101 ASC_DBG_PRT_ASC_QDONE_INFO(2, qdonep); 7102 7103 scp = advansys_srb_to_ptr(asc_dvc_varp, qdonep->d2.srb_ptr); 7104 if (!scp) 7105 return; 7106 7107 ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len); 7108 7109 shost = scp->device->host; 7110 ASC_STATS(shost, callback); 7111 ASC_DBG(1, "shost 0x%p\n", shost); 7112 7113 boardp = shost_priv(shost); 7114 BUG_ON(asc_dvc_varp != &boardp->dvc_var.asc_dvc_var); 7115 7116 dma_unmap_single(boardp->dev, scp->SCp.dma_handle, 7117 SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); 7118 /* 7119 * 'qdonep' contains the command's ending status. 7120 */ 7121 switch (qdonep->d3.done_stat) { 7122 case QD_NO_ERROR: 7123 ASC_DBG(2, "QD_NO_ERROR\n"); 7124 scp->result = 0; 7125 7126 /* 7127 * Check for an underrun condition. 7128 * 7129 * If there was no error and an underrun condition, then 7130 * return the number of underrun bytes. 7131 */ 7132 if (scsi_bufflen(scp) != 0 && qdonep->remain_bytes != 0 && 7133 qdonep->remain_bytes <= scsi_bufflen(scp)) { 7134 ASC_DBG(1, "underrun condition %u bytes\n", 7135 (unsigned)qdonep->remain_bytes); 7136 scsi_set_resid(scp, qdonep->remain_bytes); 7137 } 7138 break; 7139 7140 case QD_WITH_ERROR: 7141 ASC_DBG(2, "QD_WITH_ERROR\n"); 7142 switch (qdonep->d3.host_stat) { 7143 case QHSTA_NO_ERROR: 7144 if (qdonep->d3.scsi_stat == SAM_STAT_CHECK_CONDITION) { 7145 ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n"); 7146 ASC_DBG_PRT_SENSE(2, scp->sense_buffer, 7147 SCSI_SENSE_BUFFERSIZE); 7148 /* 7149 * Note: The 'status_byte()' macro used by 7150 * target drivers defined in scsi.h shifts the 7151 * status byte returned by host drivers right 7152 * by 1 bit. This is why target drivers also 7153 * use right shifted status byte definitions. 7154 * For instance target drivers use 7155 * CHECK_CONDITION, defined to 0x1, instead of 7156 * the SCSI defined check condition value of 7157 * 0x2. Host drivers are supposed to return 7158 * the status byte as it is defined by SCSI. 7159 */ 7160 scp->result = DRIVER_BYTE(DRIVER_SENSE) | 7161 STATUS_BYTE(qdonep->d3.scsi_stat); 7162 } else { 7163 scp->result = STATUS_BYTE(qdonep->d3.scsi_stat); 7164 } 7165 break; 7166 7167 default: 7168 /* QHSTA error occurred */ 7169 ASC_DBG(1, "host_stat 0x%x\n", qdonep->d3.host_stat); 7170 scp->result = HOST_BYTE(DID_BAD_TARGET); 7171 break; 7172 } 7173 break; 7174 7175 case QD_ABORTED_BY_HOST: 7176 ASC_DBG(1, "QD_ABORTED_BY_HOST\n"); 7177 scp->result = 7178 HOST_BYTE(DID_ABORT) | MSG_BYTE(qdonep->d3. 7179 scsi_msg) | 7180 STATUS_BYTE(qdonep->d3.scsi_stat); 7181 break; 7182 7183 default: 7184 ASC_DBG(1, "done_stat 0x%x\n", qdonep->d3.done_stat); 7185 scp->result = 7186 HOST_BYTE(DID_ERROR) | MSG_BYTE(qdonep->d3. 7187 scsi_msg) | 7188 STATUS_BYTE(qdonep->d3.scsi_stat); 7189 break; 7190 } 7191 7192 /* 7193 * If the 'init_tidmask' bit isn't already set for the target and the 7194 * current request finished normally, then set the bit for the target 7195 * to indicate that a device is present. 7196 */ 7197 if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->device->id)) == 0 && 7198 qdonep->d3.done_stat == QD_NO_ERROR && 7199 qdonep->d3.host_stat == QHSTA_NO_ERROR) { 7200 boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->device->id); 7201 } 7202 7203 asc_scsi_done(scp); 7204} 7205 7206static int AscIsrQDone(ASC_DVC_VAR *asc_dvc) 7207{ 7208 uchar next_qp; 7209 uchar n_q_used; 7210 uchar sg_list_qp; 7211 uchar sg_queue_cnt; 7212 uchar q_cnt; 7213 uchar done_q_tail; 7214 uchar tid_no; 7215 ASC_SCSI_BIT_ID_TYPE scsi_busy; 7216 ASC_SCSI_BIT_ID_TYPE target_id; 7217 PortAddr iop_base; 7218 ushort q_addr; 7219 ushort sg_q_addr; 7220 uchar cur_target_qng; 7221 ASC_QDONE_INFO scsiq_buf; 7222 ASC_QDONE_INFO *scsiq; 7223 int false_overrun; 7224 7225 iop_base = asc_dvc->iop_base; 7226 n_q_used = 1; 7227 scsiq = (ASC_QDONE_INFO *)&scsiq_buf; 7228 done_q_tail = (uchar)AscGetVarDoneQTail(iop_base); 7229 q_addr = ASC_QNO_TO_QADDR(done_q_tail); 7230 next_qp = AscReadLramByte(iop_base, 7231 (ushort)(q_addr + (ushort)ASC_SCSIQ_B_FWD)); 7232 if (next_qp != ASC_QLINK_END) { 7233 AscPutVarDoneQTail(iop_base, next_qp); 7234 q_addr = ASC_QNO_TO_QADDR(next_qp); 7235 sg_queue_cnt = _AscCopyLramScsiDoneQ(iop_base, q_addr, scsiq, 7236 asc_dvc->max_dma_count); 7237 AscWriteLramByte(iop_base, 7238 (ushort)(q_addr + 7239 (ushort)ASC_SCSIQ_B_STATUS), 7240 (uchar)(scsiq-> 7241 q_status & (uchar)~(QS_READY | 7242 QS_ABORTED))); 7243 tid_no = ASC_TIX_TO_TID(scsiq->d2.target_ix); 7244 target_id = ASC_TIX_TO_TARGET_ID(scsiq->d2.target_ix); 7245 if ((scsiq->cntl & QC_SG_HEAD) != 0) { 7246 sg_q_addr = q_addr; 7247 sg_list_qp = next_qp; 7248 for (q_cnt = 0; q_cnt < sg_queue_cnt; q_cnt++) { 7249 sg_list_qp = AscReadLramByte(iop_base, 7250 (ushort)(sg_q_addr 7251 + (ushort) 7252 ASC_SCSIQ_B_FWD)); 7253 sg_q_addr = ASC_QNO_TO_QADDR(sg_list_qp); 7254 if (sg_list_qp == ASC_QLINK_END) { 7255 AscSetLibErrorCode(asc_dvc, 7256 ASCQ_ERR_SG_Q_LINKS); 7257 scsiq->d3.done_stat = QD_WITH_ERROR; 7258 scsiq->d3.host_stat = 7259 QHSTA_D_QDONE_SG_LIST_CORRUPTED; 7260 goto FATAL_ERR_QDONE; 7261 } 7262 AscWriteLramByte(iop_base, 7263 (ushort)(sg_q_addr + (ushort) 7264 ASC_SCSIQ_B_STATUS), 7265 QS_FREE); 7266 } 7267 n_q_used = sg_queue_cnt + 1; 7268 AscPutVarDoneQTail(iop_base, sg_list_qp); 7269 } 7270 if (asc_dvc->queue_full_or_busy & target_id) { 7271 cur_target_qng = AscReadLramByte(iop_base, 7272 (ushort)((ushort) 7273 ASC_QADR_BEG 7274 + (ushort) 7275 scsiq->d2. 7276 target_ix)); 7277 if (cur_target_qng < asc_dvc->max_dvc_qng[tid_no]) { 7278 scsi_busy = AscReadLramByte(iop_base, (ushort) 7279 ASCV_SCSIBUSY_B); 7280 scsi_busy &= ~target_id; 7281 AscWriteLramByte(iop_base, 7282 (ushort)ASCV_SCSIBUSY_B, 7283 scsi_busy); 7284 asc_dvc->queue_full_or_busy &= ~target_id; 7285 } 7286 } 7287 if (asc_dvc->cur_total_qng >= n_q_used) { 7288 asc_dvc->cur_total_qng -= n_q_used; 7289 if (asc_dvc->cur_dvc_qng[tid_no] != 0) { 7290 asc_dvc->cur_dvc_qng[tid_no]--; 7291 } 7292 } else { 7293 AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CUR_QNG); 7294 scsiq->d3.done_stat = QD_WITH_ERROR; 7295 goto FATAL_ERR_QDONE; 7296 } 7297 if ((scsiq->d2.srb_ptr == 0UL) || 7298 ((scsiq->q_status & QS_ABORTED) != 0)) { 7299 return (0x11); 7300 } else if (scsiq->q_status == QS_DONE) { 7301 false_overrun = FALSE; 7302 if (scsiq->extra_bytes != 0) { 7303 scsiq->remain_bytes += 7304 (ADV_DCNT)scsiq->extra_bytes; 7305 } 7306 if (scsiq->d3.done_stat == QD_WITH_ERROR) { 7307 if (scsiq->d3.host_stat == 7308 QHSTA_M_DATA_OVER_RUN) { 7309 if ((scsiq-> 7310 cntl & (QC_DATA_IN | QC_DATA_OUT)) 7311 == 0) { 7312 scsiq->d3.done_stat = 7313 QD_NO_ERROR; 7314 scsiq->d3.host_stat = 7315 QHSTA_NO_ERROR; 7316 } else if (false_overrun) { 7317 scsiq->d3.done_stat = 7318 QD_NO_ERROR; 7319 scsiq->d3.host_stat = 7320 QHSTA_NO_ERROR; 7321 } 7322 } else if (scsiq->d3.host_stat == 7323 QHSTA_M_HUNG_REQ_SCSI_BUS_RESET) { 7324 AscStopChip(iop_base); 7325 AscSetChipControl(iop_base, 7326 (uchar)(CC_SCSI_RESET 7327 | CC_HALT)); 7328 udelay(60); 7329 AscSetChipControl(iop_base, CC_HALT); 7330 AscSetChipStatus(iop_base, 7331 CIW_CLR_SCSI_RESET_INT); 7332 AscSetChipStatus(iop_base, 0); 7333 AscSetChipControl(iop_base, 0); 7334 } 7335 } 7336 if ((scsiq->cntl & QC_NO_CALLBACK) == 0) { 7337 asc_isr_callback(asc_dvc, scsiq); 7338 } else { 7339 if ((AscReadLramByte(iop_base, 7340 (ushort)(q_addr + (ushort) 7341 ASC_SCSIQ_CDB_BEG)) 7342 == START_STOP)) { 7343 asc_dvc->unit_not_ready &= ~target_id; 7344 if (scsiq->d3.done_stat != QD_NO_ERROR) { 7345 asc_dvc->start_motor &= 7346 ~target_id; 7347 } 7348 } 7349 } 7350 return (1); 7351 } else { 7352 AscSetLibErrorCode(asc_dvc, ASCQ_ERR_Q_STATUS); 7353 FATAL_ERR_QDONE: 7354 if ((scsiq->cntl & QC_NO_CALLBACK) == 0) { 7355 asc_isr_callback(asc_dvc, scsiq); 7356 } 7357 return (0x80); 7358 } 7359 } 7360 return (0); 7361} 7362 7363static int AscISR(ASC_DVC_VAR *asc_dvc) 7364{ 7365 ASC_CS_TYPE chipstat; 7366 PortAddr iop_base; 7367 ushort saved_ram_addr; 7368 uchar ctrl_reg; 7369 uchar saved_ctrl_reg; 7370 int int_pending; 7371 int status; 7372 uchar host_flag; 7373 7374 iop_base = asc_dvc->iop_base; 7375 int_pending = FALSE; 7376 7377 if (AscIsIntPending(iop_base) == 0) 7378 return int_pending; 7379 7380 if ((asc_dvc->init_state & ASC_INIT_STATE_END_LOAD_MC) == 0) { 7381 return ERR; 7382 } 7383 if (asc_dvc->in_critical_cnt != 0) { 7384 AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_ON_CRITICAL); 7385 return ERR; 7386 } 7387 if (asc_dvc->is_in_int) { 7388 AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_RE_ENTRY); 7389 return ERR; 7390 } 7391 asc_dvc->is_in_int = TRUE; 7392 ctrl_reg = AscGetChipControl(iop_base); 7393 saved_ctrl_reg = ctrl_reg & (~(CC_SCSI_RESET | CC_CHIP_RESET | 7394 CC_SINGLE_STEP | CC_DIAG | CC_TEST)); 7395 chipstat = AscGetChipStatus(iop_base); 7396 if (chipstat & CSW_SCSI_RESET_LATCH) { 7397 if (!(asc_dvc->bus_type & (ASC_IS_VL | ASC_IS_EISA))) { 7398 int i = 10; 7399 int_pending = TRUE; 7400 asc_dvc->sdtr_done = 0; 7401 saved_ctrl_reg &= (uchar)(~CC_HALT); 7402 while ((AscGetChipStatus(iop_base) & 7403 CSW_SCSI_RESET_ACTIVE) && (i-- > 0)) { 7404 mdelay(100); 7405 } 7406 AscSetChipControl(iop_base, (CC_CHIP_RESET | CC_HALT)); 7407 AscSetChipControl(iop_base, CC_HALT); 7408 AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT); 7409 AscSetChipStatus(iop_base, 0); 7410 chipstat = AscGetChipStatus(iop_base); 7411 } 7412 } 7413 saved_ram_addr = AscGetChipLramAddr(iop_base); 7414 host_flag = AscReadLramByte(iop_base, 7415 ASCV_HOST_FLAG_B) & 7416 (uchar)(~ASC_HOST_FLAG_IN_ISR); 7417 AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, 7418 (uchar)(host_flag | (uchar)ASC_HOST_FLAG_IN_ISR)); 7419 if ((chipstat & CSW_INT_PENDING) || (int_pending)) { 7420 AscAckInterrupt(iop_base); 7421 int_pending = TRUE; 7422 if ((chipstat & CSW_HALTED) && (ctrl_reg & CC_SINGLE_STEP)) { 7423 if (AscIsrChipHalted(asc_dvc) == ERR) { 7424 goto ISR_REPORT_QDONE_FATAL_ERROR; 7425 } else { 7426 saved_ctrl_reg &= (uchar)(~CC_HALT); 7427 } 7428 } else { 7429 ISR_REPORT_QDONE_FATAL_ERROR: 7430 if ((asc_dvc->dvc_cntl & ASC_CNTL_INT_MULTI_Q) != 0) { 7431 while (((status = 7432 AscIsrQDone(asc_dvc)) & 0x01) != 0) { 7433 } 7434 } else { 7435 do { 7436 if ((status = 7437 AscIsrQDone(asc_dvc)) == 1) { 7438 break; 7439 } 7440 } while (status == 0x11); 7441 } 7442 if ((status & 0x80) != 0) 7443 int_pending = ERR; 7444 } 7445 } 7446 AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag); 7447 AscSetChipLramAddr(iop_base, saved_ram_addr); 7448 AscSetChipControl(iop_base, saved_ctrl_reg); 7449 asc_dvc->is_in_int = FALSE; 7450 return int_pending; 7451} 7452 7453/* 7454 * advansys_reset() 7455 * 7456 * Reset the bus associated with the command 'scp'. 7457 * 7458 * This function runs its own thread. Interrupts must be blocked but 7459 * sleeping is allowed and no locking other than for host structures is 7460 * required. Returns SUCCESS or FAILED. 7461 */ 7462static int advansys_reset(struct scsi_cmnd *scp) 7463{ 7464 struct Scsi_Host *shost = scp->device->host; 7465 struct asc_board *boardp = shost_priv(shost); 7466 unsigned long flags; 7467 int status; 7468 int ret = SUCCESS; 7469 7470 ASC_DBG(1, "0x%p\n", scp); 7471 7472 ASC_STATS(shost, reset); 7473 7474 scmd_printk(KERN_INFO, scp, "SCSI bus reset started...\n"); 7475 7476 if (ASC_NARROW_BOARD(boardp)) { 7477 ASC_DVC_VAR *asc_dvc = &boardp->dvc_var.asc_dvc_var; 7478 7479 /* Reset the chip and SCSI bus. */ 7480 ASC_DBG(1, "before AscInitAsc1000Driver()\n"); 7481 status = AscInitAsc1000Driver(asc_dvc); 7482 7483 /* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */ 7484 if (asc_dvc->err_code || !asc_dvc->overrun_dma) { 7485 scmd_printk(KERN_INFO, scp, "SCSI bus reset error: " 7486 "0x%x, status: 0x%x\n", asc_dvc->err_code, 7487 status); 7488 ret = FAILED; 7489 } else if (status) { 7490 scmd_printk(KERN_INFO, scp, "SCSI bus reset warning: " 7491 "0x%x\n", status); 7492 } else { 7493 scmd_printk(KERN_INFO, scp, "SCSI bus reset " 7494 "successful\n"); 7495 } 7496 7497 ASC_DBG(1, "after AscInitAsc1000Driver()\n"); 7498 spin_lock_irqsave(shost->host_lock, flags); 7499 } else { 7500 /* 7501 * If the suggest reset bus flags are set, then reset the bus. 7502 * Otherwise only reset the device. 7503 */ 7504 ADV_DVC_VAR *adv_dvc = &boardp->dvc_var.adv_dvc_var; 7505 7506 /* 7507 * Reset the target's SCSI bus. 7508 */ 7509 ASC_DBG(1, "before AdvResetChipAndSB()\n"); 7510 switch (AdvResetChipAndSB(adv_dvc)) { 7511 case ASC_TRUE: 7512 scmd_printk(KERN_INFO, scp, "SCSI bus reset " 7513 "successful\n"); 7514 break; 7515 case ASC_FALSE: 7516 default: 7517 scmd_printk(KERN_INFO, scp, "SCSI bus reset error\n"); 7518 ret = FAILED; 7519 break; 7520 } 7521 spin_lock_irqsave(shost->host_lock, flags); 7522 AdvISR(adv_dvc); 7523 } 7524 7525 /* Save the time of the most recently completed reset. */ 7526 boardp->last_reset = jiffies; 7527 spin_unlock_irqrestore(shost->host_lock, flags); 7528 7529 ASC_DBG(1, "ret %d\n", ret); 7530 7531 return ret; 7532} 7533 7534/* 7535 * advansys_biosparam() 7536 * 7537 * Translate disk drive geometry if the "BIOS greater than 1 GB" 7538 * support is enabled for a drive. 7539 * 7540 * ip (information pointer) is an int array with the following definition: 7541 * ip[0]: heads 7542 * ip[1]: sectors 7543 * ip[2]: cylinders 7544 */ 7545static int 7546advansys_biosparam(struct scsi_device *sdev, struct block_device *bdev, 7547 sector_t capacity, int ip[]) 7548{ 7549 struct asc_board *boardp = shost_priv(sdev->host); 7550 7551 ASC_DBG(1, "begin\n"); 7552 ASC_STATS(sdev->host, biosparam); 7553 if (ASC_NARROW_BOARD(boardp)) { 7554 if ((boardp->dvc_var.asc_dvc_var.dvc_cntl & 7555 ASC_CNTL_BIOS_GT_1GB) && capacity > 0x200000) { 7556 ip[0] = 255; 7557 ip[1] = 63; 7558 } else { 7559 ip[0] = 64; 7560 ip[1] = 32; 7561 } 7562 } else { 7563 if ((boardp->dvc_var.adv_dvc_var.bios_ctrl & 7564 BIOS_CTRL_EXTENDED_XLAT) && capacity > 0x200000) { 7565 ip[0] = 255; 7566 ip[1] = 63; 7567 } else { 7568 ip[0] = 64; 7569 ip[1] = 32; 7570 } 7571 } 7572 ip[2] = (unsigned long)capacity / (ip[0] * ip[1]); 7573 ASC_DBG(1, "end\n"); 7574 return 0; 7575} 7576 7577/* 7578 * First-level interrupt handler. 7579 * 7580 * 'dev_id' is a pointer to the interrupting adapter's Scsi_Host. 7581 */ 7582static irqreturn_t advansys_interrupt(int irq, void *dev_id) 7583{ 7584 struct Scsi_Host *shost = dev_id; 7585 struct asc_board *boardp = shost_priv(shost); 7586 irqreturn_t result = IRQ_NONE; 7587 7588 ASC_DBG(2, "boardp 0x%p\n", boardp); 7589 spin_lock(shost->host_lock); 7590 if (ASC_NARROW_BOARD(boardp)) { 7591 if (AscIsIntPending(shost->io_port)) { 7592 result = IRQ_HANDLED; 7593 ASC_STATS(shost, interrupt); 7594 ASC_DBG(1, "before AscISR()\n"); 7595 AscISR(&boardp->dvc_var.asc_dvc_var); 7596 } 7597 } else { 7598 ASC_DBG(1, "before AdvISR()\n"); 7599 if (AdvISR(&boardp->dvc_var.adv_dvc_var)) { 7600 result = IRQ_HANDLED; 7601 ASC_STATS(shost, interrupt); 7602 } 7603 } 7604 spin_unlock(shost->host_lock); 7605 7606 ASC_DBG(1, "end\n"); 7607 return result; 7608} 7609 7610static int AscHostReqRiscHalt(PortAddr iop_base) 7611{ 7612 int count = 0; 7613 int sta = 0; 7614 uchar saved_stop_code; 7615 7616 if (AscIsChipHalted(iop_base)) 7617 return (1); 7618 saved_stop_code = AscReadLramByte(iop_base, ASCV_STOP_CODE_B); 7619 AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, 7620 ASC_STOP_HOST_REQ_RISC_HALT | ASC_STOP_REQ_RISC_STOP); 7621 do { 7622 if (AscIsChipHalted(iop_base)) { 7623 sta = 1; 7624 break; 7625 } 7626 mdelay(100); 7627 } while (count++ < 20); 7628 AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, saved_stop_code); 7629 return (sta); 7630} 7631 7632static int 7633AscSetRunChipSynRegAtID(PortAddr iop_base, uchar tid_no, uchar sdtr_data) 7634{ 7635 int sta = FALSE; 7636 7637 if (AscHostReqRiscHalt(iop_base)) { 7638 sta = AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data); 7639 AscStartChip(iop_base); 7640 } 7641 return sta; 7642} 7643 7644static void AscAsyncFix(ASC_DVC_VAR *asc_dvc, struct scsi_device *sdev) 7645{ 7646 char type = sdev->type; 7647 ASC_SCSI_BIT_ID_TYPE tid_bits = 1 << sdev->id; 7648 7649 if (!(asc_dvc->bug_fix_cntl & ASC_BUG_FIX_ASYN_USE_SYN)) 7650 return; 7651 if (asc_dvc->init_sdtr & tid_bits) 7652 return; 7653 7654 if ((type == TYPE_ROM) && (strncmp(sdev->vendor, "HP ", 3) == 0)) 7655 asc_dvc->pci_fix_asyn_xfer_always |= tid_bits; 7656 7657 asc_dvc->pci_fix_asyn_xfer |= tid_bits; 7658 if ((type == TYPE_PROCESSOR) || (type == TYPE_SCANNER) || 7659 (type == TYPE_ROM) || (type == TYPE_TAPE)) 7660 asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; 7661 7662 if (asc_dvc->pci_fix_asyn_xfer & tid_bits) 7663 AscSetRunChipSynRegAtID(asc_dvc->iop_base, sdev->id, 7664 ASYN_SDTR_DATA_FIX_PCI_REV_AB); 7665} 7666 7667static void 7668advansys_narrow_slave_configure(struct scsi_device *sdev, ASC_DVC_VAR *asc_dvc) 7669{ 7670 ASC_SCSI_BIT_ID_TYPE tid_bit = 1 << sdev->id; 7671 ASC_SCSI_BIT_ID_TYPE orig_use_tagged_qng = asc_dvc->use_tagged_qng; 7672 7673 if (sdev->lun == 0) { 7674 ASC_SCSI_BIT_ID_TYPE orig_init_sdtr = asc_dvc->init_sdtr; 7675 if ((asc_dvc->cfg->sdtr_enable & tid_bit) && sdev->sdtr) { 7676 asc_dvc->init_sdtr |= tid_bit; 7677 } else { 7678 asc_dvc->init_sdtr &= ~tid_bit; 7679 } 7680 7681 if (orig_init_sdtr != asc_dvc->init_sdtr) 7682 AscAsyncFix(asc_dvc, sdev); 7683 } 7684 7685 if (sdev->tagged_supported) { 7686 if (asc_dvc->cfg->cmd_qng_enabled & tid_bit) { 7687 if (sdev->lun == 0) { 7688 asc_dvc->cfg->can_tagged_qng |= tid_bit; 7689 asc_dvc->use_tagged_qng |= tid_bit; 7690 } 7691 scsi_change_queue_depth(sdev, 7692 asc_dvc->max_dvc_qng[sdev->id]); 7693 } 7694 } else { 7695 if (sdev->lun == 0) { 7696 asc_dvc->cfg->can_tagged_qng &= ~tid_bit; 7697 asc_dvc->use_tagged_qng &= ~tid_bit; 7698 } 7699 } 7700 7701 if ((sdev->lun == 0) && 7702 (orig_use_tagged_qng != asc_dvc->use_tagged_qng)) { 7703 AscWriteLramByte(asc_dvc->iop_base, ASCV_DISC_ENABLE_B, 7704 asc_dvc->cfg->disc_enable); 7705 AscWriteLramByte(asc_dvc->iop_base, ASCV_USE_TAGGED_QNG_B, 7706 asc_dvc->use_tagged_qng); 7707 AscWriteLramByte(asc_dvc->iop_base, ASCV_CAN_TAGGED_QNG_B, 7708 asc_dvc->cfg->can_tagged_qng); 7709 7710 asc_dvc->max_dvc_qng[sdev->id] = 7711 asc_dvc->cfg->max_tag_qng[sdev->id]; 7712 AscWriteLramByte(asc_dvc->iop_base, 7713 (ushort)(ASCV_MAX_DVC_QNG_BEG + sdev->id), 7714 asc_dvc->max_dvc_qng[sdev->id]); 7715 } 7716} 7717 7718/* 7719 * Wide Transfers 7720 * 7721 * If the EEPROM enabled WDTR for the device and the device supports wide 7722 * bus (16 bit) transfers, then turn on the device's 'wdtr_able' bit and 7723 * write the new value to the microcode. 7724 */ 7725static void 7726advansys_wide_enable_wdtr(AdvPortAddr iop_base, unsigned short tidmask) 7727{ 7728 unsigned short cfg_word; 7729 AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word); 7730 if ((cfg_word & tidmask) != 0) 7731 return; 7732 7733 cfg_word |= tidmask; 7734 AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word); 7735 7736 /* 7737 * Clear the microcode SDTR and WDTR negotiation done indicators for 7738 * the target to cause it to negotiate with the new setting set above. 7739 * WDTR when accepted causes the target to enter asynchronous mode, so 7740 * SDTR must be negotiated. 7741 */ 7742 AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); 7743 cfg_word &= ~tidmask; 7744 AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); 7745 AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word); 7746 cfg_word &= ~tidmask; 7747 AdvWriteWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word); 7748} 7749 7750/* 7751 * Synchronous Transfers 7752 * 7753 * If the EEPROM enabled SDTR for the device and the device 7754 * supports synchronous transfers, then turn on the device's 7755 * 'sdtr_able' bit. Write the new value to the microcode. 7756 */ 7757static void 7758advansys_wide_enable_sdtr(AdvPortAddr iop_base, unsigned short tidmask) 7759{ 7760 unsigned short cfg_word; 7761 AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word); 7762 if ((cfg_word & tidmask) != 0) 7763 return; 7764 7765 cfg_word |= tidmask; 7766 AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word); 7767 7768 /* 7769 * Clear the microcode "SDTR negotiation" done indicator for the 7770 * target to cause it to negotiate with the new setting set above. 7771 */ 7772 AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); 7773 cfg_word &= ~tidmask; 7774 AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); 7775} 7776 7777/* 7778 * PPR (Parallel Protocol Request) Capable 7779 * 7780 * If the device supports DT mode, then it must be PPR capable. 7781 * The PPR message will be used in place of the SDTR and WDTR 7782 * messages to negotiate synchronous speed and offset, transfer 7783 * width, and protocol options. 7784 */ 7785static void advansys_wide_enable_ppr(ADV_DVC_VAR *adv_dvc, 7786 AdvPortAddr iop_base, unsigned short tidmask) 7787{ 7788 AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, adv_dvc->ppr_able); 7789 adv_dvc->ppr_able |= tidmask; 7790 AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, adv_dvc->ppr_able); 7791} 7792 7793static void 7794advansys_wide_slave_configure(struct scsi_device *sdev, ADV_DVC_VAR *adv_dvc) 7795{ 7796 AdvPortAddr iop_base = adv_dvc->iop_base; 7797 unsigned short tidmask = 1 << sdev->id; 7798 7799 if (sdev->lun == 0) { 7800 /* 7801 * Handle WDTR, SDTR, and Tag Queuing. If the feature 7802 * is enabled in the EEPROM and the device supports the 7803 * feature, then enable it in the microcode. 7804 */ 7805 7806 if ((adv_dvc->wdtr_able & tidmask) && sdev->wdtr) 7807 advansys_wide_enable_wdtr(iop_base, tidmask); 7808 if ((adv_dvc->sdtr_able & tidmask) && sdev->sdtr) 7809 advansys_wide_enable_sdtr(iop_base, tidmask); 7810 if (adv_dvc->chip_type == ADV_CHIP_ASC38C1600 && sdev->ppr) 7811 advansys_wide_enable_ppr(adv_dvc, iop_base, tidmask); 7812 7813 /* 7814 * Tag Queuing is disabled for the BIOS which runs in polled 7815 * mode and would see no benefit from Tag Queuing. Also by 7816 * disabling Tag Queuing in the BIOS devices with Tag Queuing 7817 * bugs will at least work with the BIOS. 7818 */ 7819 if ((adv_dvc->tagqng_able & tidmask) && 7820 sdev->tagged_supported) { 7821 unsigned short cfg_word; 7822 AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, cfg_word); 7823 cfg_word |= tidmask; 7824 AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, 7825 cfg_word); 7826 AdvWriteByteLram(iop_base, 7827 ASC_MC_NUMBER_OF_MAX_CMD + sdev->id, 7828 adv_dvc->max_dvc_qng); 7829 } 7830 } 7831 7832 if ((adv_dvc->tagqng_able & tidmask) && sdev->tagged_supported) 7833 scsi_change_queue_depth(sdev, adv_dvc->max_dvc_qng); 7834} 7835 7836/* 7837 * Set the number of commands to queue per device for the 7838 * specified host adapter. 7839 */ 7840static int advansys_slave_configure(struct scsi_device *sdev) 7841{ 7842 struct asc_board *boardp = shost_priv(sdev->host); 7843 7844 if (ASC_NARROW_BOARD(boardp)) 7845 advansys_narrow_slave_configure(sdev, 7846 &boardp->dvc_var.asc_dvc_var); 7847 else 7848 advansys_wide_slave_configure(sdev, 7849 &boardp->dvc_var.adv_dvc_var); 7850 7851 return 0; 7852} 7853 7854static __le32 advansys_get_sense_buffer_dma(struct scsi_cmnd *scp) 7855{ 7856 struct asc_board *board = shost_priv(scp->device->host); 7857 scp->SCp.dma_handle = dma_map_single(board->dev, scp->sense_buffer, 7858 SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); 7859 dma_cache_sync(board->dev, scp->sense_buffer, 7860 SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); 7861 return cpu_to_le32(scp->SCp.dma_handle); 7862} 7863 7864static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp, 7865 struct asc_scsi_q *asc_scsi_q) 7866{ 7867 struct asc_dvc_var *asc_dvc = &boardp->dvc_var.asc_dvc_var; 7868 int use_sg; 7869 7870 memset(asc_scsi_q, 0, sizeof(*asc_scsi_q)); 7871 7872 /* 7873 * Point the ASC_SCSI_Q to the 'struct scsi_cmnd'. 7874 */ 7875 asc_scsi_q->q2.srb_ptr = advansys_ptr_to_srb(asc_dvc, scp); 7876 if (asc_scsi_q->q2.srb_ptr == BAD_SRB) { 7877 scp->result = HOST_BYTE(DID_SOFT_ERROR); 7878 return ASC_ERROR; 7879 } 7880 7881 /* 7882 * Build the ASC_SCSI_Q request. 7883 */ 7884 asc_scsi_q->cdbptr = &scp->cmnd[0]; 7885 asc_scsi_q->q2.cdb_len = scp->cmd_len; 7886 asc_scsi_q->q1.target_id = ASC_TID_TO_TARGET_ID(scp->device->id); 7887 asc_scsi_q->q1.target_lun = scp->device->lun; 7888 asc_scsi_q->q2.target_ix = 7889 ASC_TIDLUN_TO_IX(scp->device->id, scp->device->lun); 7890 asc_scsi_q->q1.sense_addr = advansys_get_sense_buffer_dma(scp); 7891 asc_scsi_q->q1.sense_len = SCSI_SENSE_BUFFERSIZE; 7892 7893 /* 7894 * If there are any outstanding requests for the current target, 7895 * then every 255th request send an ORDERED request. This heuristic 7896 * tries to retain the benefit of request sorting while preventing 7897 * request starvation. 255 is the max number of tags or pending commands 7898 * a device may have outstanding. 7899 * 7900 * The request count is incremented below for every successfully 7901 * started request. 7902 * 7903 */ 7904 if ((asc_dvc->cur_dvc_qng[scp->device->id] > 0) && 7905 (boardp->reqcnt[scp->device->id] % 255) == 0) { 7906 asc_scsi_q->q2.tag_code = ORDERED_QUEUE_TAG; 7907 } else { 7908 asc_scsi_q->q2.tag_code = SIMPLE_QUEUE_TAG; 7909 } 7910 7911 /* Build ASC_SCSI_Q */ 7912 use_sg = scsi_dma_map(scp); 7913 if (use_sg != 0) { 7914 int sgcnt; 7915 struct scatterlist *slp; 7916 struct asc_sg_head *asc_sg_head; 7917 7918 if (use_sg > scp->device->host->sg_tablesize) { 7919 scmd_printk(KERN_ERR, scp, "use_sg %d > " 7920 "sg_tablesize %d\n", use_sg, 7921 scp->device->host->sg_tablesize); 7922 scsi_dma_unmap(scp); 7923 scp->result = HOST_BYTE(DID_ERROR); 7924 return ASC_ERROR; 7925 } 7926 7927 asc_sg_head = kzalloc(sizeof(asc_scsi_q->sg_head) + 7928 use_sg * sizeof(struct asc_sg_list), GFP_ATOMIC); 7929 if (!asc_sg_head) { 7930 scsi_dma_unmap(scp); 7931 scp->result = HOST_BYTE(DID_SOFT_ERROR); 7932 return ASC_ERROR; 7933 } 7934 7935 asc_scsi_q->q1.cntl |= QC_SG_HEAD; 7936 asc_scsi_q->sg_head = asc_sg_head; 7937 asc_scsi_q->q1.data_cnt = 0; 7938 asc_scsi_q->q1.data_addr = 0; 7939 /* This is a byte value, otherwise it would need to be swapped. */ 7940 asc_sg_head->entry_cnt = asc_scsi_q->q1.sg_queue_cnt = use_sg; 7941 ASC_STATS_ADD(scp->device->host, xfer_elem, 7942 asc_sg_head->entry_cnt); 7943 7944 /* 7945 * Convert scatter-gather list into ASC_SG_HEAD list. 7946 */ 7947 scsi_for_each_sg(scp, slp, use_sg, sgcnt) { 7948 asc_sg_head->sg_list[sgcnt].addr = 7949 cpu_to_le32(sg_dma_address(slp)); 7950 asc_sg_head->sg_list[sgcnt].bytes = 7951 cpu_to_le32(sg_dma_len(slp)); 7952 ASC_STATS_ADD(scp->device->host, xfer_sect, 7953 DIV_ROUND_UP(sg_dma_len(slp), 512)); 7954 } 7955 } 7956 7957 ASC_STATS(scp->device->host, xfer_cnt); 7958 7959 ASC_DBG_PRT_ASC_SCSI_Q(2, asc_scsi_q); 7960 ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len); 7961 7962 return ASC_NOERROR; 7963} 7964 7965/* 7966 * Build scatter-gather list for Adv Library (Wide Board). 7967 * 7968 * Additional ADV_SG_BLOCK structures will need to be allocated 7969 * if the total number of scatter-gather elements exceeds 7970 * NO_OF_SG_PER_BLOCK (15). The ADV_SG_BLOCK structures are 7971 * assumed to be physically contiguous. 7972 * 7973 * Return: 7974 * ADV_SUCCESS(1) - SG List successfully created 7975 * ADV_ERROR(-1) - SG List creation failed 7976 */ 7977static int 7978adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp, struct scsi_cmnd *scp, 7979 int use_sg) 7980{ 7981 adv_sgblk_t *sgblkp; 7982 ADV_SCSI_REQ_Q *scsiqp; 7983 struct scatterlist *slp; 7984 int sg_elem_cnt; 7985 ADV_SG_BLOCK *sg_block, *prev_sg_block; 7986 ADV_PADDR sg_block_paddr; 7987 int i; 7988 7989 scsiqp = (ADV_SCSI_REQ_Q *)ADV_32BALIGN(&reqp->scsi_req_q); 7990 slp = scsi_sglist(scp); 7991 sg_elem_cnt = use_sg; 7992 prev_sg_block = NULL; 7993 reqp->sgblkp = NULL; 7994 7995 for (;;) { 7996 /* 7997 * Allocate a 'adv_sgblk_t' structure from the board free 7998 * list. One 'adv_sgblk_t' structure holds NO_OF_SG_PER_BLOCK 7999 * (15) scatter-gather elements. 8000 */ 8001 if ((sgblkp = boardp->adv_sgblkp) == NULL) { 8002 ASC_DBG(1, "no free adv_sgblk_t\n"); 8003 ASC_STATS(scp->device->host, adv_build_nosg); 8004 8005 /* 8006 * Allocation failed. Free 'adv_sgblk_t' structures 8007 * already allocated for the request. 8008 */ 8009 while ((sgblkp = reqp->sgblkp) != NULL) { 8010 /* Remove 'sgblkp' from the request list. */ 8011 reqp->sgblkp = sgblkp->next_sgblkp; 8012 8013 /* Add 'sgblkp' to the board free list. */ 8014 sgblkp->next_sgblkp = boardp->adv_sgblkp; 8015 boardp->adv_sgblkp = sgblkp; 8016 } 8017 return ASC_BUSY; 8018 } 8019 8020 /* Complete 'adv_sgblk_t' board allocation. */ 8021 boardp->adv_sgblkp = sgblkp->next_sgblkp; 8022 sgblkp->next_sgblkp = NULL; 8023 8024 /* 8025 * Get 8 byte aligned virtual and physical addresses 8026 * for the allocated ADV_SG_BLOCK structure. 8027 */ 8028 sg_block = (ADV_SG_BLOCK *)ADV_8BALIGN(&sgblkp->sg_block); 8029 sg_block_paddr = virt_to_bus(sg_block); 8030 8031 /* 8032 * Check if this is the first 'adv_sgblk_t' for the 8033 * request. 8034 */ 8035 if (reqp->sgblkp == NULL) { 8036 /* Request's first scatter-gather block. */ 8037 reqp->sgblkp = sgblkp; 8038 8039 /* 8040 * Set ADV_SCSI_REQ_T ADV_SG_BLOCK virtual and physical 8041 * address pointers. 8042 */ 8043 scsiqp->sg_list_ptr = sg_block; 8044 scsiqp->sg_real_addr = cpu_to_le32(sg_block_paddr); 8045 } else { 8046 /* Request's second or later scatter-gather block. */ 8047 sgblkp->next_sgblkp = reqp->sgblkp; 8048 reqp->sgblkp = sgblkp; 8049 8050 /* 8051 * Point the previous ADV_SG_BLOCK structure to 8052 * the newly allocated ADV_SG_BLOCK structure. 8053 */ 8054 prev_sg_block->sg_ptr = cpu_to_le32(sg_block_paddr); 8055 } 8056 8057 for (i = 0; i < NO_OF_SG_PER_BLOCK; i++) { 8058 sg_block->sg_list[i].sg_addr = 8059 cpu_to_le32(sg_dma_address(slp)); 8060 sg_block->sg_list[i].sg_count = 8061 cpu_to_le32(sg_dma_len(slp)); 8062 ASC_STATS_ADD(scp->device->host, xfer_sect, 8063 DIV_ROUND_UP(sg_dma_len(slp), 512)); 8064 8065 if (--sg_elem_cnt == 0) { /* Last ADV_SG_BLOCK and scatter-gather entry. */ 8066 sg_block->sg_cnt = i + 1; 8067 sg_block->sg_ptr = 0L; /* Last ADV_SG_BLOCK in list. */ 8068 return ADV_SUCCESS; 8069 } 8070 slp++; 8071 } 8072 sg_block->sg_cnt = NO_OF_SG_PER_BLOCK; 8073 prev_sg_block = sg_block; 8074 } 8075} 8076 8077/* 8078 * Build a request structure for the Adv Library (Wide Board). 8079 * 8080 * If an adv_req_t can not be allocated to issue the request, 8081 * then return ASC_BUSY. If an error occurs, then return ASC_ERROR. 8082 * 8083 * Multi-byte fields in the ASC_SCSI_REQ_Q that are used by the 8084 * microcode for DMA addresses or math operations are byte swapped 8085 * to little-endian order. 8086 */ 8087static int 8088adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp, 8089 ADV_SCSI_REQ_Q **adv_scsiqpp) 8090{ 8091 adv_req_t *reqp; 8092 ADV_SCSI_REQ_Q *scsiqp; 8093 int i; 8094 int ret; 8095 int use_sg; 8096 8097 /* 8098 * Allocate an adv_req_t structure from the board to execute 8099 * the command. 8100 */ 8101 if (boardp->adv_reqp == NULL) { 8102 ASC_DBG(1, "no free adv_req_t\n"); 8103 ASC_STATS(scp->device->host, adv_build_noreq); 8104 return ASC_BUSY; 8105 } else { 8106 reqp = boardp->adv_reqp; 8107 boardp->adv_reqp = reqp->next_reqp; 8108 reqp->next_reqp = NULL; 8109 } 8110 8111 /* 8112 * Get 32-byte aligned ADV_SCSI_REQ_Q and ADV_SG_BLOCK pointers. 8113 */ 8114 scsiqp = (ADV_SCSI_REQ_Q *)ADV_32BALIGN(&reqp->scsi_req_q); 8115 8116 /* 8117 * Initialize the structure. 8118 */ 8119 scsiqp->cntl = scsiqp->scsi_cntl = scsiqp->done_status = 0; 8120 8121 /* 8122 * Set the ADV_SCSI_REQ_Q 'srb_ptr' to point to the adv_req_t structure. 8123 */ 8124 scsiqp->srb_ptr = ADV_VADDR_TO_U32(reqp); 8125 8126 /* 8127 * Set the adv_req_t 'cmndp' to point to the struct scsi_cmnd structure. 8128 */ 8129 reqp->cmndp = scp; 8130 8131 /* 8132 * Build the ADV_SCSI_REQ_Q request. 8133 */ 8134 8135 /* Set CDB length and copy it to the request structure. */ 8136 scsiqp->cdb_len = scp->cmd_len; 8137 /* Copy first 12 CDB bytes to cdb[]. */ 8138 for (i = 0; i < scp->cmd_len && i < 12; i++) { 8139 scsiqp->cdb[i] = scp->cmnd[i]; 8140 } 8141 /* Copy last 4 CDB bytes, if present, to cdb16[]. */ 8142 for (; i < scp->cmd_len; i++) { 8143 scsiqp->cdb16[i - 12] = scp->cmnd[i]; 8144 } 8145 8146 scsiqp->target_id = scp->device->id; 8147 scsiqp->target_lun = scp->device->lun; 8148 8149 scsiqp->sense_addr = cpu_to_le32(virt_to_bus(&scp->sense_buffer[0])); 8150 scsiqp->sense_len = SCSI_SENSE_BUFFERSIZE; 8151 8152 /* Build ADV_SCSI_REQ_Q */ 8153 8154 use_sg = scsi_dma_map(scp); 8155 if (use_sg == 0) { 8156 /* Zero-length transfer */ 8157 reqp->sgblkp = NULL; 8158 scsiqp->data_cnt = 0; 8159 scsiqp->vdata_addr = NULL; 8160 8161 scsiqp->data_addr = 0; 8162 scsiqp->sg_list_ptr = NULL; 8163 scsiqp->sg_real_addr = 0; 8164 } else { 8165 if (use_sg > ADV_MAX_SG_LIST) { 8166 scmd_printk(KERN_ERR, scp, "use_sg %d > " 8167 "ADV_MAX_SG_LIST %d\n", use_sg, 8168 scp->device->host->sg_tablesize); 8169 scsi_dma_unmap(scp); 8170 scp->result = HOST_BYTE(DID_ERROR); 8171 8172 /* 8173 * Free the 'adv_req_t' structure by adding it back 8174 * to the board free list. 8175 */ 8176 reqp->next_reqp = boardp->adv_reqp; 8177 boardp->adv_reqp = reqp; 8178 8179 return ASC_ERROR; 8180 } 8181 8182 scsiqp->data_cnt = cpu_to_le32(scsi_bufflen(scp)); 8183 8184 ret = adv_get_sglist(boardp, reqp, scp, use_sg); 8185 if (ret != ADV_SUCCESS) { 8186 /* 8187 * Free the adv_req_t structure by adding it back to 8188 * the board free list. 8189 */ 8190 reqp->next_reqp = boardp->adv_reqp; 8191 boardp->adv_reqp = reqp; 8192 8193 return ret; 8194 } 8195 8196 ASC_STATS_ADD(scp->device->host, xfer_elem, use_sg); 8197 } 8198 8199 ASC_STATS(scp->device->host, xfer_cnt); 8200 8201 ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp); 8202 ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len); 8203 8204 *adv_scsiqpp = scsiqp; 8205 8206 return ASC_NOERROR; 8207} 8208 8209static int AscSgListToQueue(int sg_list) 8210{ 8211 int n_sg_list_qs; 8212 8213 n_sg_list_qs = ((sg_list - 1) / ASC_SG_LIST_PER_Q); 8214 if (((sg_list - 1) % ASC_SG_LIST_PER_Q) != 0) 8215 n_sg_list_qs++; 8216 return n_sg_list_qs + 1; 8217} 8218 8219static uint 8220AscGetNumOfFreeQueue(ASC_DVC_VAR *asc_dvc, uchar target_ix, uchar n_qs) 8221{ 8222 uint cur_used_qs; 8223 uint cur_free_qs; 8224 ASC_SCSI_BIT_ID_TYPE target_id; 8225 uchar tid_no; 8226 8227 target_id = ASC_TIX_TO_TARGET_ID(target_ix); 8228 tid_no = ASC_TIX_TO_TID(target_ix); 8229 if ((asc_dvc->unit_not_ready & target_id) || 8230 (asc_dvc->queue_full_or_busy & target_id)) { 8231 return 0; 8232 } 8233 if (n_qs == 1) { 8234 cur_used_qs = (uint) asc_dvc->cur_total_qng + 8235 (uint) asc_dvc->last_q_shortage + (uint) ASC_MIN_FREE_Q; 8236 } else { 8237 cur_used_qs = (uint) asc_dvc->cur_total_qng + 8238 (uint) ASC_MIN_FREE_Q; 8239 } 8240 if ((uint) (cur_used_qs + n_qs) <= (uint) asc_dvc->max_total_qng) { 8241 cur_free_qs = (uint) asc_dvc->max_total_qng - cur_used_qs; 8242 if (asc_dvc->cur_dvc_qng[tid_no] >= 8243 asc_dvc->max_dvc_qng[tid_no]) { 8244 return 0; 8245 } 8246 return cur_free_qs; 8247 } 8248 if (n_qs > 1) { 8249 if ((n_qs > asc_dvc->last_q_shortage) 8250 && (n_qs <= (asc_dvc->max_total_qng - ASC_MIN_FREE_Q))) { 8251 asc_dvc->last_q_shortage = n_qs; 8252 } 8253 } 8254 return 0; 8255} 8256 8257static uchar AscAllocFreeQueue(PortAddr iop_base, uchar free_q_head) 8258{ 8259 ushort q_addr; 8260 uchar next_qp; 8261 uchar q_status; 8262 8263 q_addr = ASC_QNO_TO_QADDR(free_q_head); 8264 q_status = (uchar)AscReadLramByte(iop_base, 8265 (ushort)(q_addr + 8266 ASC_SCSIQ_B_STATUS)); 8267 next_qp = AscReadLramByte(iop_base, (ushort)(q_addr + ASC_SCSIQ_B_FWD)); 8268 if (((q_status & QS_READY) == 0) && (next_qp != ASC_QLINK_END)) 8269 return next_qp; 8270 return ASC_QLINK_END; 8271} 8272 8273static uchar 8274AscAllocMultipleFreeQueue(PortAddr iop_base, uchar free_q_head, uchar n_free_q) 8275{ 8276 uchar i; 8277 8278 for (i = 0; i < n_free_q; i++) { 8279 free_q_head = AscAllocFreeQueue(iop_base, free_q_head); 8280 if (free_q_head == ASC_QLINK_END) 8281 break; 8282 } 8283 return free_q_head; 8284} 8285 8286/* 8287 * void 8288 * DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words) 8289 * 8290 * Calling/Exit State: 8291 * none 8292 * 8293 * Description: 8294 * Output an ASC_SCSI_Q structure to the chip 8295 */ 8296static void 8297DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words) 8298{ 8299 int i; 8300 8301 ASC_DBG_PRT_HEX(2, "DvcPutScsiQ", outbuf, 2 * words); 8302 AscSetChipLramAddr(iop_base, s_addr); 8303 for (i = 0; i < 2 * words; i += 2) { 8304 if (i == 4 || i == 20) { 8305 continue; 8306 } 8307 outpw(iop_base + IOP_RAM_DATA, 8308 ((ushort)outbuf[i + 1] << 8) | outbuf[i]); 8309 } 8310} 8311 8312static int AscPutReadyQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no) 8313{ 8314 ushort q_addr; 8315 uchar tid_no; 8316 uchar sdtr_data; 8317 uchar syn_period_ix; 8318 uchar syn_offset; 8319 PortAddr iop_base; 8320 8321 iop_base = asc_dvc->iop_base; 8322 if (((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) && 8323 ((asc_dvc->sdtr_done & scsiq->q1.target_id) == 0)) { 8324 tid_no = ASC_TIX_TO_TID(scsiq->q2.target_ix); 8325 sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no); 8326 syn_period_ix = 8327 (sdtr_data >> 4) & (asc_dvc->max_sdtr_index - 1); 8328 syn_offset = sdtr_data & ASC_SYN_MAX_OFFSET; 8329 AscMsgOutSDTR(asc_dvc, 8330 asc_dvc->sdtr_period_tbl[syn_period_ix], 8331 syn_offset); 8332 scsiq->q1.cntl |= QC_MSG_OUT; 8333 } 8334 q_addr = ASC_QNO_TO_QADDR(q_no); 8335 if ((scsiq->q1.target_id & asc_dvc->use_tagged_qng) == 0) { 8336 scsiq->q2.tag_code &= ~SIMPLE_QUEUE_TAG; 8337 } 8338 scsiq->q1.status = QS_FREE; 8339 AscMemWordCopyPtrToLram(iop_base, 8340 q_addr + ASC_SCSIQ_CDB_BEG, 8341 (uchar *)scsiq->cdbptr, scsiq->q2.cdb_len >> 1); 8342 8343 DvcPutScsiQ(iop_base, 8344 q_addr + ASC_SCSIQ_CPY_BEG, 8345 (uchar *)&scsiq->q1.cntl, 8346 ((sizeof(ASC_SCSIQ_1) + sizeof(ASC_SCSIQ_2)) / 2) - 1); 8347 AscWriteLramWord(iop_base, 8348 (ushort)(q_addr + (ushort)ASC_SCSIQ_B_STATUS), 8349 (ushort)(((ushort)scsiq->q1. 8350 q_no << 8) | (ushort)QS_READY)); 8351 return 1; 8352} 8353 8354static int 8355AscPutReadySgListQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no) 8356{ 8357 int sta; 8358 int i; 8359 ASC_SG_HEAD *sg_head; 8360 ASC_SG_LIST_Q scsi_sg_q; 8361 ASC_DCNT saved_data_addr; 8362 ASC_DCNT saved_data_cnt; 8363 PortAddr iop_base; 8364 ushort sg_list_dwords; 8365 ushort sg_index; 8366 ushort sg_entry_cnt; 8367 ushort q_addr; 8368 uchar next_qp; 8369 8370 iop_base = asc_dvc->iop_base; 8371 sg_head = scsiq->sg_head; 8372 saved_data_addr = scsiq->q1.data_addr; 8373 saved_data_cnt = scsiq->q1.data_cnt; 8374 scsiq->q1.data_addr = (ASC_PADDR) sg_head->sg_list[0].addr; 8375 scsiq->q1.data_cnt = (ASC_DCNT) sg_head->sg_list[0].bytes; 8376#if CC_VERY_LONG_SG_LIST 8377 /* 8378 * If sg_head->entry_cnt is greater than ASC_MAX_SG_LIST 8379 * then not all SG elements will fit in the allocated queues. 8380 * The rest of the SG elements will be copied when the RISC 8381 * completes the SG elements that fit and halts. 8382 */ 8383 if (sg_head->entry_cnt > ASC_MAX_SG_LIST) { 8384 /* 8385 * Set sg_entry_cnt to be the number of SG elements that 8386 * will fit in the allocated SG queues. It is minus 1, because 8387 * the first SG element is handled above. ASC_MAX_SG_LIST is 8388 * already inflated by 1 to account for this. For example it 8389 * may be 50 which is 1 + 7 queues * 7 SG elements. 8390 */ 8391 sg_entry_cnt = ASC_MAX_SG_LIST - 1; 8392 8393 /* 8394 * Keep track of remaining number of SG elements that will 8395 * need to be handled from a_isr.c. 8396 */ 8397 scsiq->remain_sg_entry_cnt = 8398 sg_head->entry_cnt - ASC_MAX_SG_LIST; 8399 } else { 8400#endif /* CC_VERY_LONG_SG_LIST */ 8401 /* 8402 * Set sg_entry_cnt to be the number of SG elements that 8403 * will fit in the allocated SG queues. It is minus 1, because 8404 * the first SG element is handled above. 8405 */ 8406 sg_entry_cnt = sg_head->entry_cnt - 1; 8407#if CC_VERY_LONG_SG_LIST 8408 } 8409#endif /* CC_VERY_LONG_SG_LIST */ 8410 if (sg_entry_cnt != 0) { 8411 scsiq->q1.cntl |= QC_SG_HEAD; 8412 q_addr = ASC_QNO_TO_QADDR(q_no); 8413 sg_index = 1; 8414 scsiq->q1.sg_queue_cnt = sg_head->queue_cnt; 8415 scsi_sg_q.sg_head_qp = q_no; 8416 scsi_sg_q.cntl = QCSG_SG_XFER_LIST; 8417 for (i = 0; i < sg_head->queue_cnt; i++) { 8418 scsi_sg_q.seq_no = i + 1; 8419 if (sg_entry_cnt > ASC_SG_LIST_PER_Q) { 8420 sg_list_dwords = (uchar)(ASC_SG_LIST_PER_Q * 2); 8421 sg_entry_cnt -= ASC_SG_LIST_PER_Q; 8422 if (i == 0) { 8423 scsi_sg_q.sg_list_cnt = 8424 ASC_SG_LIST_PER_Q; 8425 scsi_sg_q.sg_cur_list_cnt = 8426 ASC_SG_LIST_PER_Q; 8427 } else { 8428 scsi_sg_q.sg_list_cnt = 8429 ASC_SG_LIST_PER_Q - 1; 8430 scsi_sg_q.sg_cur_list_cnt = 8431 ASC_SG_LIST_PER_Q - 1; 8432 } 8433 } else { 8434#if CC_VERY_LONG_SG_LIST 8435 /* 8436 * This is the last SG queue in the list of 8437 * allocated SG queues. If there are more 8438 * SG elements than will fit in the allocated 8439 * queues, then set the QCSG_SG_XFER_MORE flag. 8440 */ 8441 if (sg_head->entry_cnt > ASC_MAX_SG_LIST) { 8442 scsi_sg_q.cntl |= QCSG_SG_XFER_MORE; 8443 } else { 8444#endif /* CC_VERY_LONG_SG_LIST */ 8445 scsi_sg_q.cntl |= QCSG_SG_XFER_END; 8446#if CC_VERY_LONG_SG_LIST 8447 } 8448#endif /* CC_VERY_LONG_SG_LIST */ 8449 sg_list_dwords = sg_entry_cnt << 1; 8450 if (i == 0) { 8451 scsi_sg_q.sg_list_cnt = sg_entry_cnt; 8452 scsi_sg_q.sg_cur_list_cnt = 8453 sg_entry_cnt; 8454 } else { 8455 scsi_sg_q.sg_list_cnt = 8456 sg_entry_cnt - 1; 8457 scsi_sg_q.sg_cur_list_cnt = 8458 sg_entry_cnt - 1; 8459 } 8460 sg_entry_cnt = 0; 8461 } 8462 next_qp = AscReadLramByte(iop_base, 8463 (ushort)(q_addr + 8464 ASC_SCSIQ_B_FWD)); 8465 scsi_sg_q.q_no = next_qp; 8466 q_addr = ASC_QNO_TO_QADDR(next_qp); 8467 AscMemWordCopyPtrToLram(iop_base, 8468 q_addr + ASC_SCSIQ_SGHD_CPY_BEG, 8469 (uchar *)&scsi_sg_q, 8470 sizeof(ASC_SG_LIST_Q) >> 1); 8471 AscMemDWordCopyPtrToLram(iop_base, 8472 q_addr + ASC_SGQ_LIST_BEG, 8473 (uchar *)&sg_head-> 8474 sg_list[sg_index], 8475 sg_list_dwords); 8476 sg_index += ASC_SG_LIST_PER_Q; 8477 scsiq->next_sg_index = sg_index; 8478 } 8479 } else { 8480 scsiq->q1.cntl &= ~QC_SG_HEAD; 8481 } 8482 sta = AscPutReadyQueue(asc_dvc, scsiq, q_no); 8483 scsiq->q1.data_addr = saved_data_addr; 8484 scsiq->q1.data_cnt = saved_data_cnt; 8485 return (sta); 8486} 8487 8488static int 8489AscSendScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar n_q_required) 8490{ 8491 PortAddr iop_base; 8492 uchar free_q_head; 8493 uchar next_qp; 8494 uchar tid_no; 8495 uchar target_ix; 8496 int sta; 8497 8498 iop_base = asc_dvc->iop_base; 8499 target_ix = scsiq->q2.target_ix; 8500 tid_no = ASC_TIX_TO_TID(target_ix); 8501 sta = 0; 8502 free_q_head = (uchar)AscGetVarFreeQHead(iop_base); 8503 if (n_q_required > 1) { 8504 next_qp = AscAllocMultipleFreeQueue(iop_base, free_q_head, 8505 (uchar)n_q_required); 8506 if (next_qp != ASC_QLINK_END) { 8507 asc_dvc->last_q_shortage = 0; 8508 scsiq->sg_head->queue_cnt = n_q_required - 1; 8509 scsiq->q1.q_no = free_q_head; 8510 sta = AscPutReadySgListQueue(asc_dvc, scsiq, 8511 free_q_head); 8512 } 8513 } else if (n_q_required == 1) { 8514 next_qp = AscAllocFreeQueue(iop_base, free_q_head); 8515 if (next_qp != ASC_QLINK_END) { 8516 scsiq->q1.q_no = free_q_head; 8517 sta = AscPutReadyQueue(asc_dvc, scsiq, free_q_head); 8518 } 8519 } 8520 if (sta == 1) { 8521 AscPutVarFreeQHead(iop_base, next_qp); 8522 asc_dvc->cur_total_qng += n_q_required; 8523 asc_dvc->cur_dvc_qng[tid_no]++; 8524 } 8525 return sta; 8526} 8527 8528#define ASC_SYN_OFFSET_ONE_DISABLE_LIST 16 8529static uchar _syn_offset_one_disable_cmd[ASC_SYN_OFFSET_ONE_DISABLE_LIST] = { 8530 INQUIRY, 8531 REQUEST_SENSE, 8532 READ_CAPACITY, 8533 READ_TOC, 8534 MODE_SELECT, 8535 MODE_SENSE, 8536 MODE_SELECT_10, 8537 MODE_SENSE_10, 8538 0xFF, 8539 0xFF, 8540 0xFF, 8541 0xFF, 8542 0xFF, 8543 0xFF, 8544 0xFF, 8545 0xFF 8546}; 8547 8548static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq) 8549{ 8550 PortAddr iop_base; 8551 int sta; 8552 int n_q_required; 8553 int disable_syn_offset_one_fix; 8554 int i; 8555 ASC_PADDR addr; 8556 ushort sg_entry_cnt = 0; 8557 ushort sg_entry_cnt_minus_one = 0; 8558 uchar target_ix; 8559 uchar tid_no; 8560 uchar sdtr_data; 8561 uchar extra_bytes; 8562 uchar scsi_cmd; 8563 uchar disable_cmd; 8564 ASC_SG_HEAD *sg_head; 8565 ASC_DCNT data_cnt; 8566 8567 iop_base = asc_dvc->iop_base; 8568 sg_head = scsiq->sg_head; 8569 if (asc_dvc->err_code != 0) 8570 return (ERR); 8571 scsiq->q1.q_no = 0; 8572 if ((scsiq->q2.tag_code & ASC_TAG_FLAG_EXTRA_BYTES) == 0) { 8573 scsiq->q1.extra_bytes = 0; 8574 } 8575 sta = 0; 8576 target_ix = scsiq->q2.target_ix; 8577 tid_no = ASC_TIX_TO_TID(target_ix); 8578 n_q_required = 1; 8579 if (scsiq->cdbptr[0] == REQUEST_SENSE) { 8580 if ((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) { 8581 asc_dvc->sdtr_done &= ~scsiq->q1.target_id; 8582 sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no); 8583 AscMsgOutSDTR(asc_dvc, 8584 asc_dvc-> 8585 sdtr_period_tbl[(sdtr_data >> 4) & 8586 (uchar)(asc_dvc-> 8587 max_sdtr_index - 8588 1)], 8589 (uchar)(sdtr_data & (uchar) 8590 ASC_SYN_MAX_OFFSET)); 8591 scsiq->q1.cntl |= (QC_MSG_OUT | QC_URGENT); 8592 } 8593 } 8594 if (asc_dvc->in_critical_cnt != 0) { 8595 AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CRITICAL_RE_ENTRY); 8596 return (ERR); 8597 } 8598 asc_dvc->in_critical_cnt++; 8599 if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) { 8600 if ((sg_entry_cnt = sg_head->entry_cnt) == 0) { 8601 asc_dvc->in_critical_cnt--; 8602 return (ERR); 8603 } 8604#if !CC_VERY_LONG_SG_LIST 8605 if (sg_entry_cnt > ASC_MAX_SG_LIST) { 8606 asc_dvc->in_critical_cnt--; 8607 return (ERR); 8608 } 8609#endif /* !CC_VERY_LONG_SG_LIST */ 8610 if (sg_entry_cnt == 1) { 8611 scsiq->q1.data_addr = 8612 (ADV_PADDR)sg_head->sg_list[0].addr; 8613 scsiq->q1.data_cnt = 8614 (ADV_DCNT)sg_head->sg_list[0].bytes; 8615 scsiq->q1.cntl &= ~(QC_SG_HEAD | QC_SG_SWAP_QUEUE); 8616 } 8617 sg_entry_cnt_minus_one = sg_entry_cnt - 1; 8618 } 8619 scsi_cmd = scsiq->cdbptr[0]; 8620 disable_syn_offset_one_fix = FALSE; 8621 if ((asc_dvc->pci_fix_asyn_xfer & scsiq->q1.target_id) && 8622 !(asc_dvc->pci_fix_asyn_xfer_always & scsiq->q1.target_id)) { 8623 if (scsiq->q1.cntl & QC_SG_HEAD) { 8624 data_cnt = 0; 8625 for (i = 0; i < sg_entry_cnt; i++) { 8626 data_cnt += 8627 (ADV_DCNT)le32_to_cpu(sg_head->sg_list[i]. 8628 bytes); 8629 } 8630 } else { 8631 data_cnt = le32_to_cpu(scsiq->q1.data_cnt); 8632 } 8633 if (data_cnt != 0UL) { 8634 if (data_cnt < 512UL) { 8635 disable_syn_offset_one_fix = TRUE; 8636 } else { 8637 for (i = 0; i < ASC_SYN_OFFSET_ONE_DISABLE_LIST; 8638 i++) { 8639 disable_cmd = 8640 _syn_offset_one_disable_cmd[i]; 8641 if (disable_cmd == 0xFF) { 8642 break; 8643 } 8644 if (scsi_cmd == disable_cmd) { 8645 disable_syn_offset_one_fix = 8646 TRUE; 8647 break; 8648 } 8649 } 8650 } 8651 } 8652 } 8653 if (disable_syn_offset_one_fix) { 8654 scsiq->q2.tag_code &= ~SIMPLE_QUEUE_TAG; 8655 scsiq->q2.tag_code |= (ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX | 8656 ASC_TAG_FLAG_DISABLE_DISCONNECT); 8657 } else { 8658 scsiq->q2.tag_code &= 0x27; 8659 } 8660 if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) { 8661 if (asc_dvc->bug_fix_cntl) { 8662 if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) { 8663 if ((scsi_cmd == READ_6) || 8664 (scsi_cmd == READ_10)) { 8665 addr = 8666 (ADV_PADDR)le32_to_cpu(sg_head-> 8667 sg_list 8668 [sg_entry_cnt_minus_one]. 8669 addr) + 8670 (ADV_DCNT)le32_to_cpu(sg_head-> 8671 sg_list 8672 [sg_entry_cnt_minus_one]. 8673 bytes); 8674 extra_bytes = 8675 (uchar)((ushort)addr & 0x0003); 8676 if ((extra_bytes != 0) 8677 && 8678 ((scsiq->q2. 8679 tag_code & 8680 ASC_TAG_FLAG_EXTRA_BYTES) 8681 == 0)) { 8682 scsiq->q2.tag_code |= 8683 ASC_TAG_FLAG_EXTRA_BYTES; 8684 scsiq->q1.extra_bytes = 8685 extra_bytes; 8686 data_cnt = 8687 le32_to_cpu(sg_head-> 8688 sg_list 8689 [sg_entry_cnt_minus_one]. 8690 bytes); 8691 data_cnt -= 8692 (ASC_DCNT) extra_bytes; 8693 sg_head-> 8694 sg_list 8695 [sg_entry_cnt_minus_one]. 8696 bytes = 8697 cpu_to_le32(data_cnt); 8698 } 8699 } 8700 } 8701 } 8702 sg_head->entry_to_copy = sg_head->entry_cnt; 8703#if CC_VERY_LONG_SG_LIST 8704 /* 8705 * Set the sg_entry_cnt to the maximum possible. The rest of 8706 * the SG elements will be copied when the RISC completes the 8707 * SG elements that fit and halts. 8708 */ 8709 if (sg_entry_cnt > ASC_MAX_SG_LIST) { 8710 sg_entry_cnt = ASC_MAX_SG_LIST; 8711 } 8712#endif /* CC_VERY_LONG_SG_LIST */ 8713 n_q_required = AscSgListToQueue(sg_entry_cnt); 8714 if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, n_q_required) >= 8715 (uint) n_q_required) 8716 || ((scsiq->q1.cntl & QC_URGENT) != 0)) { 8717 if ((sta = 8718 AscSendScsiQueue(asc_dvc, scsiq, 8719 n_q_required)) == 1) { 8720 asc_dvc->in_critical_cnt--; 8721 return (sta); 8722 } 8723 } 8724 } else { 8725 if (asc_dvc->bug_fix_cntl) { 8726 if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) { 8727 if ((scsi_cmd == READ_6) || 8728 (scsi_cmd == READ_10)) { 8729 addr = 8730 le32_to_cpu(scsiq->q1.data_addr) + 8731 le32_to_cpu(scsiq->q1.data_cnt); 8732 extra_bytes = 8733 (uchar)((ushort)addr & 0x0003); 8734 if ((extra_bytes != 0) 8735 && 8736 ((scsiq->q2. 8737 tag_code & 8738 ASC_TAG_FLAG_EXTRA_BYTES) 8739 == 0)) { 8740 data_cnt = 8741 le32_to_cpu(scsiq->q1. 8742 data_cnt); 8743 if (((ushort)data_cnt & 0x01FF) 8744 == 0) { 8745 scsiq->q2.tag_code |= 8746 ASC_TAG_FLAG_EXTRA_BYTES; 8747 data_cnt -= (ASC_DCNT) 8748 extra_bytes; 8749 scsiq->q1.data_cnt = 8750 cpu_to_le32 8751 (data_cnt); 8752 scsiq->q1.extra_bytes = 8753 extra_bytes; 8754 } 8755 } 8756 } 8757 } 8758 } 8759 n_q_required = 1; 8760 if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, 1) >= 1) || 8761 ((scsiq->q1.cntl & QC_URGENT) != 0)) { 8762 if ((sta = AscSendScsiQueue(asc_dvc, scsiq, 8763 n_q_required)) == 1) { 8764 asc_dvc->in_critical_cnt--; 8765 return (sta); 8766 } 8767 } 8768 } 8769 asc_dvc->in_critical_cnt--; 8770 return (sta); 8771} 8772 8773/* 8774 * AdvExeScsiQueue() - Send a request to the RISC microcode program. 8775 * 8776 * Allocate a carrier structure, point the carrier to the ADV_SCSI_REQ_Q, 8777 * add the carrier to the ICQ (Initiator Command Queue), and tickle the 8778 * RISC to notify it a new command is ready to be executed. 8779 * 8780 * If 'done_status' is not set to QD_DO_RETRY, then 'error_retry' will be 8781 * set to SCSI_MAX_RETRY. 8782 * 8783 * Multi-byte fields in the ASC_SCSI_REQ_Q that are used by the microcode 8784 * for DMA addresses or math operations are byte swapped to little-endian 8785 * order. 8786 * 8787 * Return: 8788 * ADV_SUCCESS(1) - The request was successfully queued. 8789 * ADV_BUSY(0) - Resource unavailable; Retry again after pending 8790 * request completes. 8791 * ADV_ERROR(-1) - Invalid ADV_SCSI_REQ_Q request structure 8792 * host IC error. 8793 */ 8794static int AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, ADV_SCSI_REQ_Q *scsiq) 8795{ 8796 AdvPortAddr iop_base; 8797 ADV_PADDR req_paddr; 8798 ADV_CARR_T *new_carrp; 8799 8800 /* 8801 * The ADV_SCSI_REQ_Q 'target_id' field should never exceed ADV_MAX_TID. 8802 */ 8803 if (scsiq->target_id > ADV_MAX_TID) { 8804 scsiq->host_status = QHSTA_M_INVALID_DEVICE; 8805 scsiq->done_status = QD_WITH_ERROR; 8806 return ADV_ERROR; 8807 } 8808 8809 iop_base = asc_dvc->iop_base; 8810 8811 /* 8812 * Allocate a carrier ensuring at least one carrier always 8813 * remains on the freelist and initialize fields. 8814 */ 8815 if ((new_carrp = asc_dvc->carr_freelist) == NULL) { 8816 return ADV_BUSY; 8817 } 8818 asc_dvc->carr_freelist = (ADV_CARR_T *) 8819 ADV_U32_TO_VADDR(le32_to_cpu(new_carrp->next_vpa)); 8820 asc_dvc->carr_pending_cnt++; 8821 8822 /* 8823 * Set the carrier to be a stopper by setting 'next_vpa' 8824 * to the stopper value. The current stopper will be changed 8825 * below to point to the new stopper. 8826 */ 8827 new_carrp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); 8828 8829 /* 8830 * Clear the ADV_SCSI_REQ_Q done flag. 8831 */ 8832 scsiq->a_flag &= ~ADV_SCSIQ_DONE; 8833 8834 req_paddr = virt_to_bus(scsiq); 8835 BUG_ON(req_paddr & 31); 8836 /* Wait for assertion before making little-endian */ 8837 req_paddr = cpu_to_le32(req_paddr); 8838 8839 /* Save virtual and physical address of ADV_SCSI_REQ_Q and carrier. */ 8840 scsiq->scsiq_ptr = cpu_to_le32(ADV_VADDR_TO_U32(scsiq)); 8841 scsiq->scsiq_rptr = req_paddr; 8842 8843 scsiq->carr_va = cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->icq_sp)); 8844 /* 8845 * Every ADV_CARR_T.carr_pa is byte swapped to little-endian 8846 * order during initialization. 8847 */ 8848 scsiq->carr_pa = asc_dvc->icq_sp->carr_pa; 8849 8850 /* 8851 * Use the current stopper to send the ADV_SCSI_REQ_Q command to 8852 * the microcode. The newly allocated stopper will become the new 8853 * stopper. 8854 */ 8855 asc_dvc->icq_sp->areq_vpa = req_paddr; 8856 8857 /* 8858 * Set the 'next_vpa' pointer for the old stopper to be the 8859 * physical address of the new stopper. The RISC can only 8860 * follow physical addresses. 8861 */ 8862 asc_dvc->icq_sp->next_vpa = new_carrp->carr_pa; 8863 8864 /* 8865 * Set the host adapter stopper pointer to point to the new carrier. 8866 */ 8867 asc_dvc->icq_sp = new_carrp; 8868 8869 if (asc_dvc->chip_type == ADV_CHIP_ASC3550 || 8870 asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { 8871 /* 8872 * Tickle the RISC to tell it to read its Command Queue Head pointer. 8873 */ 8874 AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_A); 8875 if (asc_dvc->chip_type == ADV_CHIP_ASC3550) { 8876 /* 8877 * Clear the tickle value. In the ASC-3550 the RISC flag 8878 * command 'clr_tickle_a' does not work unless the host 8879 * value is cleared. 8880 */ 8881 AdvWriteByteRegister(iop_base, IOPB_TICKLE, 8882 ADV_TICKLE_NOP); 8883 } 8884 } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { 8885 /* 8886 * Notify the RISC a carrier is ready by writing the physical 8887 * address of the new carrier stopper to the COMMA register. 8888 */ 8889 AdvWriteDWordRegister(iop_base, IOPDW_COMMA, 8890 le32_to_cpu(new_carrp->carr_pa)); 8891 } 8892 8893 return ADV_SUCCESS; 8894} 8895 8896/* 8897 * Execute a single 'Scsi_Cmnd'. 8898 */ 8899static int asc_execute_scsi_cmnd(struct scsi_cmnd *scp) 8900{ 8901 int ret, err_code; 8902 struct asc_board *boardp = shost_priv(scp->device->host); 8903 8904 ASC_DBG(1, "scp 0x%p\n", scp); 8905 8906 if (ASC_NARROW_BOARD(boardp)) { 8907 ASC_DVC_VAR *asc_dvc = &boardp->dvc_var.asc_dvc_var; 8908 struct asc_scsi_q asc_scsi_q; 8909 8910 /* asc_build_req() can not return ASC_BUSY. */ 8911 ret = asc_build_req(boardp, scp, &asc_scsi_q); 8912 if (ret == ASC_ERROR) { 8913 ASC_STATS(scp->device->host, build_error); 8914 return ASC_ERROR; 8915 } 8916 8917 ret = AscExeScsiQueue(asc_dvc, &asc_scsi_q); 8918 kfree(asc_scsi_q.sg_head); 8919 err_code = asc_dvc->err_code; 8920 } else { 8921 ADV_DVC_VAR *adv_dvc = &boardp->dvc_var.adv_dvc_var; 8922 ADV_SCSI_REQ_Q *adv_scsiqp; 8923 8924 switch (adv_build_req(boardp, scp, &adv_scsiqp)) { 8925 case ASC_NOERROR: 8926 ASC_DBG(3, "adv_build_req ASC_NOERROR\n"); 8927 break; 8928 case ASC_BUSY: 8929 ASC_DBG(1, "adv_build_req ASC_BUSY\n"); 8930 /* 8931 * The asc_stats fields 'adv_build_noreq' and 8932 * 'adv_build_nosg' count wide board busy conditions. 8933 * They are updated in adv_build_req and 8934 * adv_get_sglist, respectively. 8935 */ 8936 return ASC_BUSY; 8937 case ASC_ERROR: 8938 default: 8939 ASC_DBG(1, "adv_build_req ASC_ERROR\n"); 8940 ASC_STATS(scp->device->host, build_error); 8941 return ASC_ERROR; 8942 } 8943 8944 ret = AdvExeScsiQueue(adv_dvc, adv_scsiqp); 8945 err_code = adv_dvc->err_code; 8946 } 8947 8948 switch (ret) { 8949 case ASC_NOERROR: 8950 ASC_STATS(scp->device->host, exe_noerror); 8951 /* 8952 * Increment monotonically increasing per device 8953 * successful request counter. Wrapping doesn't matter. 8954 */ 8955 boardp->reqcnt[scp->device->id]++; 8956 ASC_DBG(1, "ExeScsiQueue() ASC_NOERROR\n"); 8957 break; 8958 case ASC_BUSY: 8959 ASC_STATS(scp->device->host, exe_busy); 8960 break; 8961 case ASC_ERROR: 8962 scmd_printk(KERN_ERR, scp, "ExeScsiQueue() ASC_ERROR, " 8963 "err_code 0x%x\n", err_code); 8964 ASC_STATS(scp->device->host, exe_error); 8965 scp->result = HOST_BYTE(DID_ERROR); 8966 break; 8967 default: 8968 scmd_printk(KERN_ERR, scp, "ExeScsiQueue() unknown, " 8969 "err_code 0x%x\n", err_code); 8970 ASC_STATS(scp->device->host, exe_unknown); 8971 scp->result = HOST_BYTE(DID_ERROR); 8972 break; 8973 } 8974 8975 ASC_DBG(1, "end\n"); 8976 return ret; 8977} 8978 8979/* 8980 * advansys_queuecommand() - interrupt-driven I/O entrypoint. 8981 * 8982 * This function always returns 0. Command return status is saved 8983 * in the 'scp' result field. 8984 */ 8985static int 8986advansys_queuecommand_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *)) 8987{ 8988 struct Scsi_Host *shost = scp->device->host; 8989 int asc_res, result = 0; 8990 8991 ASC_STATS(shost, queuecommand); 8992 scp->scsi_done = done; 8993 8994 asc_res = asc_execute_scsi_cmnd(scp); 8995 8996 switch (asc_res) { 8997 case ASC_NOERROR: 8998 break; 8999 case ASC_BUSY: 9000 result = SCSI_MLQUEUE_HOST_BUSY; 9001 break; 9002 case ASC_ERROR: 9003 default: 9004 asc_scsi_done(scp); 9005 break; 9006 } 9007 9008 return result; 9009} 9010 9011static DEF_SCSI_QCMD(advansys_queuecommand) 9012 9013static ushort AscGetEisaChipCfg(PortAddr iop_base) 9014{ 9015 PortAddr eisa_cfg_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) | 9016 (PortAddr) (ASC_EISA_CFG_IOP_MASK); 9017 return inpw(eisa_cfg_iop); 9018} 9019 9020/* 9021 * Return the BIOS address of the adapter at the specified 9022 * I/O port and with the specified bus type. 9023 */ 9024static unsigned short AscGetChipBiosAddress(PortAddr iop_base, 9025 unsigned short bus_type) 9026{ 9027 unsigned short cfg_lsw; 9028 unsigned short bios_addr; 9029 9030 /* 9031 * The PCI BIOS is re-located by the motherboard BIOS. Because 9032 * of this the driver can not determine where a PCI BIOS is 9033 * loaded and executes. 9034 */ 9035 if (bus_type & ASC_IS_PCI) 9036 return 0; 9037 9038 if ((bus_type & ASC_IS_EISA) != 0) { 9039 cfg_lsw = AscGetEisaChipCfg(iop_base); 9040 cfg_lsw &= 0x000F; 9041 bios_addr = ASC_BIOS_MIN_ADDR + cfg_lsw * ASC_BIOS_BANK_SIZE; 9042 return bios_addr; 9043 } 9044 9045 cfg_lsw = AscGetChipCfgLsw(iop_base); 9046 9047 /* 9048 * ISA PnP uses the top bit as the 32K BIOS flag 9049 */ 9050 if (bus_type == ASC_IS_ISAPNP) 9051 cfg_lsw &= 0x7FFF; 9052 bios_addr = ASC_BIOS_MIN_ADDR + (cfg_lsw >> 12) * ASC_BIOS_BANK_SIZE; 9053 return bios_addr; 9054} 9055 9056static uchar AscSetChipScsiID(PortAddr iop_base, uchar new_host_id) 9057{ 9058 ushort cfg_lsw; 9059 9060 if (AscGetChipScsiID(iop_base) == new_host_id) { 9061 return (new_host_id); 9062 } 9063 cfg_lsw = AscGetChipCfgLsw(iop_base); 9064 cfg_lsw &= 0xF8FF; 9065 cfg_lsw |= (ushort)((new_host_id & ASC_MAX_TID) << 8); 9066 AscSetChipCfgLsw(iop_base, cfg_lsw); 9067 return (AscGetChipScsiID(iop_base)); 9068} 9069 9070static unsigned char AscGetChipScsiCtrl(PortAddr iop_base) 9071{ 9072 unsigned char sc; 9073 9074 AscSetBank(iop_base, 1); 9075 sc = inp(iop_base + IOP_REG_SC); 9076 AscSetBank(iop_base, 0); 9077 return sc; 9078} 9079 9080static unsigned char AscGetChipVersion(PortAddr iop_base, 9081 unsigned short bus_type) 9082{ 9083 if (bus_type & ASC_IS_EISA) { 9084 PortAddr eisa_iop; 9085 unsigned char revision; 9086 eisa_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) | 9087 (PortAddr) ASC_EISA_REV_IOP_MASK; 9088 revision = inp(eisa_iop); 9089 return ASC_CHIP_MIN_VER_EISA - 1 + revision; 9090 } 9091 return AscGetChipVerNo(iop_base); 9092} 9093 9094#ifdef CONFIG_ISA 9095static void AscEnableIsaDma(uchar dma_channel) 9096{ 9097 if (dma_channel < 4) { 9098 outp(0x000B, (ushort)(0xC0 | dma_channel)); 9099 outp(0x000A, dma_channel); 9100 } else if (dma_channel < 8) { 9101 outp(0x00D6, (ushort)(0xC0 | (dma_channel - 4))); 9102 outp(0x00D4, (ushort)(dma_channel - 4)); 9103 } 9104} 9105#endif /* CONFIG_ISA */ 9106 9107static int AscStopQueueExe(PortAddr iop_base) 9108{ 9109 int count = 0; 9110 9111 if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B) == 0) { 9112 AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, 9113 ASC_STOP_REQ_RISC_STOP); 9114 do { 9115 if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B) & 9116 ASC_STOP_ACK_RISC_STOP) { 9117 return (1); 9118 } 9119 mdelay(100); 9120 } while (count++ < 20); 9121 } 9122 return (0); 9123} 9124 9125static ASC_DCNT AscGetMaxDmaCount(ushort bus_type) 9126{ 9127 if (bus_type & ASC_IS_ISA) 9128 return ASC_MAX_ISA_DMA_COUNT; 9129 else if (bus_type & (ASC_IS_EISA | ASC_IS_VL)) 9130 return ASC_MAX_VL_DMA_COUNT; 9131 return ASC_MAX_PCI_DMA_COUNT; 9132} 9133 9134#ifdef CONFIG_ISA 9135static ushort AscGetIsaDmaChannel(PortAddr iop_base) 9136{ 9137 ushort channel; 9138 9139 channel = AscGetChipCfgLsw(iop_base) & 0x0003; 9140 if (channel == 0x03) 9141 return (0); 9142 else if (channel == 0x00) 9143 return (7); 9144 return (channel + 4); 9145} 9146 9147static ushort AscSetIsaDmaChannel(PortAddr iop_base, ushort dma_channel) 9148{ 9149 ushort cfg_lsw; 9150 uchar value; 9151 9152 if ((dma_channel >= 5) && (dma_channel <= 7)) { 9153 if (dma_channel == 7) 9154 value = 0x00; 9155 else 9156 value = dma_channel - 4; 9157 cfg_lsw = AscGetChipCfgLsw(iop_base) & 0xFFFC; 9158 cfg_lsw |= value; 9159 AscSetChipCfgLsw(iop_base, cfg_lsw); 9160 return (AscGetIsaDmaChannel(iop_base)); 9161 } 9162 return 0; 9163} 9164 9165static uchar AscGetIsaDmaSpeed(PortAddr iop_base) 9166{ 9167 uchar speed_value; 9168 9169 AscSetBank(iop_base, 1); 9170 speed_value = AscReadChipDmaSpeed(iop_base); 9171 speed_value &= 0x07; 9172 AscSetBank(iop_base, 0); 9173 return speed_value; 9174} 9175 9176static uchar AscSetIsaDmaSpeed(PortAddr iop_base, uchar speed_value) 9177{ 9178 speed_value &= 0x07; 9179 AscSetBank(iop_base, 1); 9180 AscWriteChipDmaSpeed(iop_base, speed_value); 9181 AscSetBank(iop_base, 0); 9182 return AscGetIsaDmaSpeed(iop_base); 9183} 9184#endif /* CONFIG_ISA */ 9185 9186static ushort AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc) 9187{ 9188 int i; 9189 PortAddr iop_base; 9190 ushort warn_code; 9191 uchar chip_version; 9192 9193 iop_base = asc_dvc->iop_base; 9194 warn_code = 0; 9195 asc_dvc->err_code = 0; 9196 if ((asc_dvc->bus_type & 9197 (ASC_IS_ISA | ASC_IS_PCI | ASC_IS_EISA | ASC_IS_VL)) == 0) { 9198 asc_dvc->err_code |= ASC_IERR_NO_BUS_TYPE; 9199 } 9200 AscSetChipControl(iop_base, CC_HALT); 9201 AscSetChipStatus(iop_base, 0); 9202 asc_dvc->bug_fix_cntl = 0; 9203 asc_dvc->pci_fix_asyn_xfer = 0; 9204 asc_dvc->pci_fix_asyn_xfer_always = 0; 9205 /* asc_dvc->init_state initialized in AscInitGetConfig(). */ 9206 asc_dvc->sdtr_done = 0; 9207 asc_dvc->cur_total_qng = 0; 9208 asc_dvc->is_in_int = 0; 9209 asc_dvc->in_critical_cnt = 0; 9210 asc_dvc->last_q_shortage = 0; 9211 asc_dvc->use_tagged_qng = 0; 9212 asc_dvc->no_scam = 0; 9213 asc_dvc->unit_not_ready = 0; 9214 asc_dvc->queue_full_or_busy = 0; 9215 asc_dvc->redo_scam = 0; 9216 asc_dvc->res2 = 0; 9217 asc_dvc->min_sdtr_index = 0; 9218 asc_dvc->cfg->can_tagged_qng = 0; 9219 asc_dvc->cfg->cmd_qng_enabled = 0; 9220 asc_dvc->dvc_cntl = ASC_DEF_DVC_CNTL; 9221 asc_dvc->init_sdtr = 0; 9222 asc_dvc->max_total_qng = ASC_DEF_MAX_TOTAL_QNG; 9223 asc_dvc->scsi_reset_wait = 3; 9224 asc_dvc->start_motor = ASC_SCSI_WIDTH_BIT_SET; 9225 asc_dvc->max_dma_count = AscGetMaxDmaCount(asc_dvc->bus_type); 9226 asc_dvc->cfg->sdtr_enable = ASC_SCSI_WIDTH_BIT_SET; 9227 asc_dvc->cfg->disc_enable = ASC_SCSI_WIDTH_BIT_SET; 9228 asc_dvc->cfg->chip_scsi_id = ASC_DEF_CHIP_SCSI_ID; 9229 chip_version = AscGetChipVersion(iop_base, asc_dvc->bus_type); 9230 asc_dvc->cfg->chip_version = chip_version; 9231 asc_dvc->sdtr_period_tbl = asc_syn_xfer_period; 9232 asc_dvc->max_sdtr_index = 7; 9233 if ((asc_dvc->bus_type & ASC_IS_PCI) && 9234 (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3150)) { 9235 asc_dvc->bus_type = ASC_IS_PCI_ULTRA; 9236 asc_dvc->sdtr_period_tbl = asc_syn_ultra_xfer_period; 9237 asc_dvc->max_sdtr_index = 15; 9238 if (chip_version == ASC_CHIP_VER_PCI_ULTRA_3150) { 9239 AscSetExtraControl(iop_base, 9240 (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE)); 9241 } else if (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3050) { 9242 AscSetExtraControl(iop_base, 9243 (SEC_ACTIVE_NEGATE | 9244 SEC_ENABLE_FILTER)); 9245 } 9246 } 9247 if (asc_dvc->bus_type == ASC_IS_PCI) { 9248 AscSetExtraControl(iop_base, 9249 (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE)); 9250 } 9251 9252 asc_dvc->cfg->isa_dma_speed = ASC_DEF_ISA_DMA_SPEED; 9253#ifdef CONFIG_ISA 9254 if ((asc_dvc->bus_type & ASC_IS_ISA) != 0) { 9255 if (chip_version >= ASC_CHIP_MIN_VER_ISA_PNP) { 9256 AscSetChipIFC(iop_base, IFC_INIT_DEFAULT); 9257 asc_dvc->bus_type = ASC_IS_ISAPNP; 9258 } 9259 asc_dvc->cfg->isa_dma_channel = 9260 (uchar)AscGetIsaDmaChannel(iop_base); 9261 } 9262#endif /* CONFIG_ISA */ 9263 for (i = 0; i <= ASC_MAX_TID; i++) { 9264 asc_dvc->cur_dvc_qng[i] = 0; 9265 asc_dvc->max_dvc_qng[i] = ASC_MAX_SCSI1_QNG; 9266 asc_dvc->scsiq_busy_head[i] = (ASC_SCSI_Q *)0L; 9267 asc_dvc->scsiq_busy_tail[i] = (ASC_SCSI_Q *)0L; 9268 asc_dvc->cfg->max_tag_qng[i] = ASC_MAX_INRAM_TAG_QNG; 9269 } 9270 return warn_code; 9271} 9272 9273static int AscWriteEEPCmdReg(PortAddr iop_base, uchar cmd_reg) 9274{ 9275 int retry; 9276 9277 for (retry = 0; retry < ASC_EEP_MAX_RETRY; retry++) { 9278 unsigned char read_back; 9279 AscSetChipEEPCmd(iop_base, cmd_reg); 9280 mdelay(1); 9281 read_back = AscGetChipEEPCmd(iop_base); 9282 if (read_back == cmd_reg) 9283 return 1; 9284 } 9285 return 0; 9286} 9287 9288static void AscWaitEEPRead(void) 9289{ 9290 mdelay(1); 9291} 9292 9293static ushort AscReadEEPWord(PortAddr iop_base, uchar addr) 9294{ 9295 ushort read_wval; 9296 uchar cmd_reg; 9297 9298 AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE); 9299 AscWaitEEPRead(); 9300 cmd_reg = addr | ASC_EEP_CMD_READ; 9301 AscWriteEEPCmdReg(iop_base, cmd_reg); 9302 AscWaitEEPRead(); 9303 read_wval = AscGetChipEEPData(iop_base); 9304 AscWaitEEPRead(); 9305 return read_wval; 9306} 9307 9308static ushort AscGetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf, 9309 ushort bus_type) 9310{ 9311 ushort wval; 9312 ushort sum; 9313 ushort *wbuf; 9314 int cfg_beg; 9315 int cfg_end; 9316 int uchar_end_in_config = ASC_EEP_MAX_DVC_ADDR - 2; 9317 int s_addr; 9318 9319 wbuf = (ushort *)cfg_buf; 9320 sum = 0; 9321 /* Read two config words; Byte-swapping done by AscReadEEPWord(). */ 9322 for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { 9323 *wbuf = AscReadEEPWord(iop_base, (uchar)s_addr); 9324 sum += *wbuf; 9325 } 9326 if (bus_type & ASC_IS_VL) { 9327 cfg_beg = ASC_EEP_DVC_CFG_BEG_VL; 9328 cfg_end = ASC_EEP_MAX_DVC_ADDR_VL; 9329 } else { 9330 cfg_beg = ASC_EEP_DVC_CFG_BEG; 9331 cfg_end = ASC_EEP_MAX_DVC_ADDR; 9332 } 9333 for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) { 9334 wval = AscReadEEPWord(iop_base, (uchar)s_addr); 9335 if (s_addr <= uchar_end_in_config) { 9336 /* 9337 * Swap all char fields - must unswap bytes already swapped 9338 * by AscReadEEPWord(). 9339 */ 9340 *wbuf = le16_to_cpu(wval); 9341 } else { 9342 /* Don't swap word field at the end - cntl field. */ 9343 *wbuf = wval; 9344 } 9345 sum += wval; /* Checksum treats all EEPROM data as words. */ 9346 } 9347 /* 9348 * Read the checksum word which will be compared against 'sum' 9349 * by the caller. Word field already swapped. 9350 */ 9351 *wbuf = AscReadEEPWord(iop_base, (uchar)s_addr); 9352 return sum; 9353} 9354 9355static int AscTestExternalLram(ASC_DVC_VAR *asc_dvc) 9356{ 9357 PortAddr iop_base; 9358 ushort q_addr; 9359 ushort saved_word; 9360 int sta; 9361 9362 iop_base = asc_dvc->iop_base; 9363 sta = 0; 9364 q_addr = ASC_QNO_TO_QADDR(241); 9365 saved_word = AscReadLramWord(iop_base, q_addr); 9366 AscSetChipLramAddr(iop_base, q_addr); 9367 AscSetChipLramData(iop_base, 0x55AA); 9368 mdelay(10); 9369 AscSetChipLramAddr(iop_base, q_addr); 9370 if (AscGetChipLramData(iop_base) == 0x55AA) { 9371 sta = 1; 9372 AscWriteLramWord(iop_base, q_addr, saved_word); 9373 } 9374 return (sta); 9375} 9376 9377static void AscWaitEEPWrite(void) 9378{ 9379 mdelay(20); 9380} 9381 9382static int AscWriteEEPDataReg(PortAddr iop_base, ushort data_reg) 9383{ 9384 ushort read_back; 9385 int retry; 9386 9387 retry = 0; 9388 while (TRUE) { 9389 AscSetChipEEPData(iop_base, data_reg); 9390 mdelay(1); 9391 read_back = AscGetChipEEPData(iop_base); 9392 if (read_back == data_reg) { 9393 return (1); 9394 } 9395 if (retry++ > ASC_EEP_MAX_RETRY) { 9396 return (0); 9397 } 9398 } 9399} 9400 9401static ushort AscWriteEEPWord(PortAddr iop_base, uchar addr, ushort word_val) 9402{ 9403 ushort read_wval; 9404 9405 read_wval = AscReadEEPWord(iop_base, addr); 9406 if (read_wval != word_val) { 9407 AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_ABLE); 9408 AscWaitEEPRead(); 9409 AscWriteEEPDataReg(iop_base, word_val); 9410 AscWaitEEPRead(); 9411 AscWriteEEPCmdReg(iop_base, 9412 (uchar)((uchar)ASC_EEP_CMD_WRITE | addr)); 9413 AscWaitEEPWrite(); 9414 AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE); 9415 AscWaitEEPRead(); 9416 return (AscReadEEPWord(iop_base, addr)); 9417 } 9418 return (read_wval); 9419} 9420 9421static int AscSetEEPConfigOnce(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf, 9422 ushort bus_type) 9423{ 9424 int n_error; 9425 ushort *wbuf; 9426 ushort word; 9427 ushort sum; 9428 int s_addr; 9429 int cfg_beg; 9430 int cfg_end; 9431 int uchar_end_in_config = ASC_EEP_MAX_DVC_ADDR - 2; 9432 9433 wbuf = (ushort *)cfg_buf; 9434 n_error = 0; 9435 sum = 0; 9436 /* Write two config words; AscWriteEEPWord() will swap bytes. */ 9437 for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { 9438 sum += *wbuf; 9439 if (*wbuf != AscWriteEEPWord(iop_base, (uchar)s_addr, *wbuf)) { 9440 n_error++; 9441 } 9442 } 9443 if (bus_type & ASC_IS_VL) { 9444 cfg_beg = ASC_EEP_DVC_CFG_BEG_VL; 9445 cfg_end = ASC_EEP_MAX_DVC_ADDR_VL; 9446 } else { 9447 cfg_beg = ASC_EEP_DVC_CFG_BEG; 9448 cfg_end = ASC_EEP_MAX_DVC_ADDR; 9449 } 9450 for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) { 9451 if (s_addr <= uchar_end_in_config) { 9452 /* 9453 * This is a char field. Swap char fields before they are 9454 * swapped again by AscWriteEEPWord(). 9455 */ 9456 word = cpu_to_le16(*wbuf); 9457 if (word != 9458 AscWriteEEPWord(iop_base, (uchar)s_addr, word)) { 9459 n_error++; 9460 } 9461 } else { 9462 /* Don't swap word field at the end - cntl field. */ 9463 if (*wbuf != 9464 AscWriteEEPWord(iop_base, (uchar)s_addr, *wbuf)) { 9465 n_error++; 9466 } 9467 } 9468 sum += *wbuf; /* Checksum calculated from word values. */ 9469 } 9470 /* Write checksum word. It will be swapped by AscWriteEEPWord(). */ 9471 *wbuf = sum; 9472 if (sum != AscWriteEEPWord(iop_base, (uchar)s_addr, sum)) { 9473 n_error++; 9474 } 9475 9476 /* Read EEPROM back again. */ 9477 wbuf = (ushort *)cfg_buf; 9478 /* 9479 * Read two config words; Byte-swapping done by AscReadEEPWord(). 9480 */ 9481 for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { 9482 if (*wbuf != AscReadEEPWord(iop_base, (uchar)s_addr)) { 9483 n_error++; 9484 } 9485 } 9486 if (bus_type & ASC_IS_VL) { 9487 cfg_beg = ASC_EEP_DVC_CFG_BEG_VL; 9488 cfg_end = ASC_EEP_MAX_DVC_ADDR_VL; 9489 } else { 9490 cfg_beg = ASC_EEP_DVC_CFG_BEG; 9491 cfg_end = ASC_EEP_MAX_DVC_ADDR; 9492 } 9493 for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) { 9494 if (s_addr <= uchar_end_in_config) { 9495 /* 9496 * Swap all char fields. Must unswap bytes already swapped 9497 * by AscReadEEPWord(). 9498 */ 9499 word = 9500 le16_to_cpu(AscReadEEPWord 9501 (iop_base, (uchar)s_addr)); 9502 } else { 9503 /* Don't swap word field at the end - cntl field. */ 9504 word = AscReadEEPWord(iop_base, (uchar)s_addr); 9505 } 9506 if (*wbuf != word) { 9507 n_error++; 9508 } 9509 } 9510 /* Read checksum; Byte swapping not needed. */ 9511 if (AscReadEEPWord(iop_base, (uchar)s_addr) != sum) { 9512 n_error++; 9513 } 9514 return n_error; 9515} 9516 9517static int AscSetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf, 9518 ushort bus_type) 9519{ 9520 int retry; 9521 int n_error; 9522 9523 retry = 0; 9524 while (TRUE) { 9525 if ((n_error = AscSetEEPConfigOnce(iop_base, cfg_buf, 9526 bus_type)) == 0) { 9527 break; 9528 } 9529 if (++retry > ASC_EEP_MAX_RETRY) { 9530 break; 9531 } 9532 } 9533 return n_error; 9534} 9535 9536static ushort AscInitFromEEP(ASC_DVC_VAR *asc_dvc) 9537{ 9538 ASCEEP_CONFIG eep_config_buf; 9539 ASCEEP_CONFIG *eep_config; 9540 PortAddr iop_base; 9541 ushort chksum; 9542 ushort warn_code; 9543 ushort cfg_msw, cfg_lsw; 9544 int i; 9545 int write_eep = 0; 9546 9547 iop_base = asc_dvc->iop_base; 9548 warn_code = 0; 9549 AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0x00FE); 9550 AscStopQueueExe(iop_base); 9551 if ((AscStopChip(iop_base) == FALSE) || 9552 (AscGetChipScsiCtrl(iop_base) != 0)) { 9553 asc_dvc->init_state |= ASC_INIT_RESET_SCSI_DONE; 9554 AscResetChipAndScsiBus(asc_dvc); 9555 mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */ 9556 } 9557 if (AscIsChipHalted(iop_base) == FALSE) { 9558 asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP; 9559 return (warn_code); 9560 } 9561 AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR); 9562 if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) { 9563 asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR; 9564 return (warn_code); 9565 } 9566 eep_config = (ASCEEP_CONFIG *)&eep_config_buf; 9567 cfg_msw = AscGetChipCfgMsw(iop_base); 9568 cfg_lsw = AscGetChipCfgLsw(iop_base); 9569 if ((cfg_msw & ASC_CFG_MSW_CLR_MASK) != 0) { 9570 cfg_msw &= ~ASC_CFG_MSW_CLR_MASK; 9571 warn_code |= ASC_WARN_CFG_MSW_RECOVER; 9572 AscSetChipCfgMsw(iop_base, cfg_msw); 9573 } 9574 chksum = AscGetEEPConfig(iop_base, eep_config, asc_dvc->bus_type); 9575 ASC_DBG(1, "chksum 0x%x\n", chksum); 9576 if (chksum == 0) { 9577 chksum = 0xaa55; 9578 } 9579 if (AscGetChipStatus(iop_base) & CSW_AUTO_CONFIG) { 9580 warn_code |= ASC_WARN_AUTO_CONFIG; 9581 if (asc_dvc->cfg->chip_version == 3) { 9582 if (eep_config->cfg_lsw != cfg_lsw) { 9583 warn_code |= ASC_WARN_EEPROM_RECOVER; 9584 eep_config->cfg_lsw = 9585 AscGetChipCfgLsw(iop_base); 9586 } 9587 if (eep_config->cfg_msw != cfg_msw) { 9588 warn_code |= ASC_WARN_EEPROM_RECOVER; 9589 eep_config->cfg_msw = 9590 AscGetChipCfgMsw(iop_base); 9591 } 9592 } 9593 } 9594 eep_config->cfg_msw &= ~ASC_CFG_MSW_CLR_MASK; 9595 eep_config->cfg_lsw |= ASC_CFG0_HOST_INT_ON; 9596 ASC_DBG(1, "eep_config->chksum 0x%x\n", eep_config->chksum); 9597 if (chksum != eep_config->chksum) { 9598 if (AscGetChipVersion(iop_base, asc_dvc->bus_type) == 9599 ASC_CHIP_VER_PCI_ULTRA_3050) { 9600 ASC_DBG(1, "chksum error ignored; EEPROM-less board\n"); 9601 eep_config->init_sdtr = 0xFF; 9602 eep_config->disc_enable = 0xFF; 9603 eep_config->start_motor = 0xFF; 9604 eep_config->use_cmd_qng = 0; 9605 eep_config->max_total_qng = 0xF0; 9606 eep_config->max_tag_qng = 0x20; 9607 eep_config->cntl = 0xBFFF; 9608 ASC_EEP_SET_CHIP_ID(eep_config, 7); 9609 eep_config->no_scam = 0; 9610 eep_config->adapter_info[0] = 0; 9611 eep_config->adapter_info[1] = 0; 9612 eep_config->adapter_info[2] = 0; 9613 eep_config->adapter_info[3] = 0; 9614 eep_config->adapter_info[4] = 0; 9615 /* Indicate EEPROM-less board. */ 9616 eep_config->adapter_info[5] = 0xBB; 9617 } else { 9618 ASC_PRINT 9619 ("AscInitFromEEP: EEPROM checksum error; Will try to re-write EEPROM.\n"); 9620 write_eep = 1; 9621 warn_code |= ASC_WARN_EEPROM_CHKSUM; 9622 } 9623 } 9624 asc_dvc->cfg->sdtr_enable = eep_config->init_sdtr; 9625 asc_dvc->cfg->disc_enable = eep_config->disc_enable; 9626 asc_dvc->cfg->cmd_qng_enabled = eep_config->use_cmd_qng; 9627 asc_dvc->cfg->isa_dma_speed = ASC_EEP_GET_DMA_SPD(eep_config); 9628 asc_dvc->start_motor = eep_config->start_motor; 9629 asc_dvc->dvc_cntl = eep_config->cntl; 9630 asc_dvc->no_scam = eep_config->no_scam; 9631 asc_dvc->cfg->adapter_info[0] = eep_config->adapter_info[0]; 9632 asc_dvc->cfg->adapter_info[1] = eep_config->adapter_info[1]; 9633 asc_dvc->cfg->adapter_info[2] = eep_config->adapter_info[2]; 9634 asc_dvc->cfg->adapter_info[3] = eep_config->adapter_info[3]; 9635 asc_dvc->cfg->adapter_info[4] = eep_config->adapter_info[4]; 9636 asc_dvc->cfg->adapter_info[5] = eep_config->adapter_info[5]; 9637 if (!AscTestExternalLram(asc_dvc)) { 9638 if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == 9639 ASC_IS_PCI_ULTRA)) { 9640 eep_config->max_total_qng = 9641 ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG; 9642 eep_config->max_tag_qng = 9643 ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG; 9644 } else { 9645 eep_config->cfg_msw |= 0x0800; 9646 cfg_msw |= 0x0800; 9647 AscSetChipCfgMsw(iop_base, cfg_msw); 9648 eep_config->max_total_qng = ASC_MAX_PCI_INRAM_TOTAL_QNG; 9649 eep_config->max_tag_qng = ASC_MAX_INRAM_TAG_QNG; 9650 } 9651 } else { 9652 } 9653 if (eep_config->max_total_qng < ASC_MIN_TOTAL_QNG) { 9654 eep_config->max_total_qng = ASC_MIN_TOTAL_QNG; 9655 } 9656 if (eep_config->max_total_qng > ASC_MAX_TOTAL_QNG) { 9657 eep_config->max_total_qng = ASC_MAX_TOTAL_QNG; 9658 } 9659 if (eep_config->max_tag_qng > eep_config->max_total_qng) { 9660 eep_config->max_tag_qng = eep_config->max_total_qng; 9661 } 9662 if (eep_config->max_tag_qng < ASC_MIN_TAG_Q_PER_DVC) { 9663 eep_config->max_tag_qng = ASC_MIN_TAG_Q_PER_DVC; 9664 } 9665 asc_dvc->max_total_qng = eep_config->max_total_qng; 9666 if ((eep_config->use_cmd_qng & eep_config->disc_enable) != 9667 eep_config->use_cmd_qng) { 9668 eep_config->disc_enable = eep_config->use_cmd_qng; 9669 warn_code |= ASC_WARN_CMD_QNG_CONFLICT; 9670 } 9671 ASC_EEP_SET_CHIP_ID(eep_config, 9672 ASC_EEP_GET_CHIP_ID(eep_config) & ASC_MAX_TID); 9673 asc_dvc->cfg->chip_scsi_id = ASC_EEP_GET_CHIP_ID(eep_config); 9674 if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) && 9675 !(asc_dvc->dvc_cntl & ASC_CNTL_SDTR_ENABLE_ULTRA)) { 9676 asc_dvc->min_sdtr_index = ASC_SDTR_ULTRA_PCI_10MB_INDEX; 9677 } 9678 9679 for (i = 0; i <= ASC_MAX_TID; i++) { 9680 asc_dvc->dos_int13_table[i] = eep_config->dos_int13_table[i]; 9681 asc_dvc->cfg->max_tag_qng[i] = eep_config->max_tag_qng; 9682 asc_dvc->cfg->sdtr_period_offset[i] = 9683 (uchar)(ASC_DEF_SDTR_OFFSET | 9684 (asc_dvc->min_sdtr_index << 4)); 9685 } 9686 eep_config->cfg_msw = AscGetChipCfgMsw(iop_base); 9687 if (write_eep) { 9688 if ((i = AscSetEEPConfig(iop_base, eep_config, 9689 asc_dvc->bus_type)) != 0) { 9690 ASC_PRINT1 9691 ("AscInitFromEEP: Failed to re-write EEPROM with %d errors.\n", 9692 i); 9693 } else { 9694 ASC_PRINT 9695 ("AscInitFromEEP: Successfully re-wrote EEPROM.\n"); 9696 } 9697 } 9698 return (warn_code); 9699} 9700 9701static int AscInitGetConfig(struct Scsi_Host *shost) 9702{ 9703 struct asc_board *board = shost_priv(shost); 9704 ASC_DVC_VAR *asc_dvc = &board->dvc_var.asc_dvc_var; 9705 unsigned short warn_code = 0; 9706 9707 asc_dvc->init_state = ASC_INIT_STATE_BEG_GET_CFG; 9708 if (asc_dvc->err_code != 0) 9709 return asc_dvc->err_code; 9710 9711 if (AscFindSignature(asc_dvc->iop_base)) { 9712 warn_code |= AscInitAscDvcVar(asc_dvc); 9713 warn_code |= AscInitFromEEP(asc_dvc); 9714 asc_dvc->init_state |= ASC_INIT_STATE_END_GET_CFG; 9715 if (asc_dvc->scsi_reset_wait > ASC_MAX_SCSI_RESET_WAIT) 9716 asc_dvc->scsi_reset_wait = ASC_MAX_SCSI_RESET_WAIT; 9717 } else { 9718 asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; 9719 } 9720 9721 switch (warn_code) { 9722 case 0: /* No error */ 9723 break; 9724 case ASC_WARN_IO_PORT_ROTATE: 9725 shost_printk(KERN_WARNING, shost, "I/O port address " 9726 "modified\n"); 9727 break; 9728 case ASC_WARN_AUTO_CONFIG: 9729 shost_printk(KERN_WARNING, shost, "I/O port increment switch " 9730 "enabled\n"); 9731 break; 9732 case ASC_WARN_EEPROM_CHKSUM: 9733 shost_printk(KERN_WARNING, shost, "EEPROM checksum error\n"); 9734 break; 9735 case ASC_WARN_IRQ_MODIFIED: 9736 shost_printk(KERN_WARNING, shost, "IRQ modified\n"); 9737 break; 9738 case ASC_WARN_CMD_QNG_CONFLICT: 9739 shost_printk(KERN_WARNING, shost, "tag queuing enabled w/o " 9740 "disconnects\n"); 9741 break; 9742 default: 9743 shost_printk(KERN_WARNING, shost, "unknown warning: 0x%x\n", 9744 warn_code); 9745 break; 9746 } 9747 9748 if (asc_dvc->err_code != 0) 9749 shost_printk(KERN_ERR, shost, "error 0x%x at init_state " 9750 "0x%x\n", asc_dvc->err_code, asc_dvc->init_state); 9751 9752 return asc_dvc->err_code; 9753} 9754 9755static int AscInitSetConfig(struct pci_dev *pdev, struct Scsi_Host *shost) 9756{ 9757 struct asc_board *board = shost_priv(shost); 9758 ASC_DVC_VAR *asc_dvc = &board->dvc_var.asc_dvc_var; 9759 PortAddr iop_base = asc_dvc->iop_base; 9760 unsigned short cfg_msw; 9761 unsigned short warn_code = 0; 9762 9763 asc_dvc->init_state |= ASC_INIT_STATE_BEG_SET_CFG; 9764 if (asc_dvc->err_code != 0) 9765 return asc_dvc->err_code; 9766 if (!AscFindSignature(asc_dvc->iop_base)) { 9767 asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; 9768 return asc_dvc->err_code; 9769 } 9770 9771 cfg_msw = AscGetChipCfgMsw(iop_base); 9772 if ((cfg_msw & ASC_CFG_MSW_CLR_MASK) != 0) { 9773 cfg_msw &= ~ASC_CFG_MSW_CLR_MASK; 9774 warn_code |= ASC_WARN_CFG_MSW_RECOVER; 9775 AscSetChipCfgMsw(iop_base, cfg_msw); 9776 } 9777 if ((asc_dvc->cfg->cmd_qng_enabled & asc_dvc->cfg->disc_enable) != 9778 asc_dvc->cfg->cmd_qng_enabled) { 9779 asc_dvc->cfg->disc_enable = asc_dvc->cfg->cmd_qng_enabled; 9780 warn_code |= ASC_WARN_CMD_QNG_CONFLICT; 9781 } 9782 if (AscGetChipStatus(iop_base) & CSW_AUTO_CONFIG) { 9783 warn_code |= ASC_WARN_AUTO_CONFIG; 9784 } 9785#ifdef CONFIG_PCI 9786 if (asc_dvc->bus_type & ASC_IS_PCI) { 9787 cfg_msw &= 0xFFC0; 9788 AscSetChipCfgMsw(iop_base, cfg_msw); 9789 if ((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) { 9790 } else { 9791 if ((pdev->device == PCI_DEVICE_ID_ASP_1200A) || 9792 (pdev->device == PCI_DEVICE_ID_ASP_ABP940)) { 9793 asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_IF_NOT_DWB; 9794 asc_dvc->bug_fix_cntl |= 9795 ASC_BUG_FIX_ASYN_USE_SYN; 9796 } 9797 } 9798 } else 9799#endif /* CONFIG_PCI */ 9800 if (asc_dvc->bus_type == ASC_IS_ISAPNP) { 9801 if (AscGetChipVersion(iop_base, asc_dvc->bus_type) 9802 == ASC_CHIP_VER_ASYN_BUG) { 9803 asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_ASYN_USE_SYN; 9804 } 9805 } 9806 if (AscSetChipScsiID(iop_base, asc_dvc->cfg->chip_scsi_id) != 9807 asc_dvc->cfg->chip_scsi_id) { 9808 asc_dvc->err_code |= ASC_IERR_SET_SCSI_ID; 9809 } 9810#ifdef CONFIG_ISA 9811 if (asc_dvc->bus_type & ASC_IS_ISA) { 9812 AscSetIsaDmaChannel(iop_base, asc_dvc->cfg->isa_dma_channel); 9813 AscSetIsaDmaSpeed(iop_base, asc_dvc->cfg->isa_dma_speed); 9814 } 9815#endif /* CONFIG_ISA */ 9816 9817 asc_dvc->init_state |= ASC_INIT_STATE_END_SET_CFG; 9818 9819 switch (warn_code) { 9820 case 0: /* No error. */ 9821 break; 9822 case ASC_WARN_IO_PORT_ROTATE: 9823 shost_printk(KERN_WARNING, shost, "I/O port address " 9824 "modified\n"); 9825 break; 9826 case ASC_WARN_AUTO_CONFIG: 9827 shost_printk(KERN_WARNING, shost, "I/O port increment switch " 9828 "enabled\n"); 9829 break; 9830 case ASC_WARN_EEPROM_CHKSUM: 9831 shost_printk(KERN_WARNING, shost, "EEPROM checksum error\n"); 9832 break; 9833 case ASC_WARN_IRQ_MODIFIED: 9834 shost_printk(KERN_WARNING, shost, "IRQ modified\n"); 9835 break; 9836 case ASC_WARN_CMD_QNG_CONFLICT: 9837 shost_printk(KERN_WARNING, shost, "tag queuing w/o " 9838 "disconnects\n"); 9839 break; 9840 default: 9841 shost_printk(KERN_WARNING, shost, "unknown warning: 0x%x\n", 9842 warn_code); 9843 break; 9844 } 9845 9846 if (asc_dvc->err_code != 0) 9847 shost_printk(KERN_ERR, shost, "error 0x%x at init_state " 9848 "0x%x\n", asc_dvc->err_code, asc_dvc->init_state); 9849 9850 return asc_dvc->err_code; 9851} 9852 9853/* 9854 * EEPROM Configuration. 9855 * 9856 * All drivers should use this structure to set the default EEPROM 9857 * configuration. The BIOS now uses this structure when it is built. 9858 * Additional structure information can be found in a_condor.h where 9859 * the structure is defined. 9860 * 9861 * The *_Field_IsChar structs are needed to correct for endianness. 9862 * These values are read from the board 16 bits at a time directly 9863 * into the structs. Because some fields are char, the values will be 9864 * in the wrong order. The *_Field_IsChar tells when to flip the 9865 * bytes. Data read and written to PCI memory is automatically swapped 9866 * on big-endian platforms so char fields read as words are actually being 9867 * unswapped on big-endian platforms. 9868 */ 9869static ADVEEP_3550_CONFIG Default_3550_EEPROM_Config = { 9870 ADV_EEPROM_BIOS_ENABLE, /* cfg_lsw */ 9871 0x0000, /* cfg_msw */ 9872 0xFFFF, /* disc_enable */ 9873 0xFFFF, /* wdtr_able */ 9874 0xFFFF, /* sdtr_able */ 9875 0xFFFF, /* start_motor */ 9876 0xFFFF, /* tagqng_able */ 9877 0xFFFF, /* bios_scan */ 9878 0, /* scam_tolerant */ 9879 7, /* adapter_scsi_id */ 9880 0, /* bios_boot_delay */ 9881 3, /* scsi_reset_delay */ 9882 0, /* bios_id_lun */ 9883 0, /* termination */ 9884 0, /* reserved1 */ 9885 0xFFE7, /* bios_ctrl */ 9886 0xFFFF, /* ultra_able */ 9887 0, /* reserved2 */ 9888 ASC_DEF_MAX_HOST_QNG, /* max_host_qng */ 9889 ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */ 9890 0, /* dvc_cntl */ 9891 0, /* bug_fix */ 9892 0, /* serial_number_word1 */ 9893 0, /* serial_number_word2 */ 9894 0, /* serial_number_word3 */ 9895 0, /* check_sum */ 9896 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} 9897 , /* oem_name[16] */ 9898 0, /* dvc_err_code */ 9899 0, /* adv_err_code */ 9900 0, /* adv_err_addr */ 9901 0, /* saved_dvc_err_code */ 9902 0, /* saved_adv_err_code */ 9903 0, /* saved_adv_err_addr */ 9904 0 /* num_of_err */ 9905}; 9906 9907static ADVEEP_3550_CONFIG ADVEEP_3550_Config_Field_IsChar = { 9908 0, /* cfg_lsw */ 9909 0, /* cfg_msw */ 9910 0, /* -disc_enable */ 9911 0, /* wdtr_able */ 9912 0, /* sdtr_able */ 9913 0, /* start_motor */ 9914 0, /* tagqng_able */ 9915 0, /* bios_scan */ 9916 0, /* scam_tolerant */ 9917 1, /* adapter_scsi_id */ 9918 1, /* bios_boot_delay */ 9919 1, /* scsi_reset_delay */ 9920 1, /* bios_id_lun */ 9921 1, /* termination */ 9922 1, /* reserved1 */ 9923 0, /* bios_ctrl */ 9924 0, /* ultra_able */ 9925 0, /* reserved2 */ 9926 1, /* max_host_qng */ 9927 1, /* max_dvc_qng */ 9928 0, /* dvc_cntl */ 9929 0, /* bug_fix */ 9930 0, /* serial_number_word1 */ 9931 0, /* serial_number_word2 */ 9932 0, /* serial_number_word3 */ 9933 0, /* check_sum */ 9934 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} 9935 , /* oem_name[16] */ 9936 0, /* dvc_err_code */ 9937 0, /* adv_err_code */ 9938 0, /* adv_err_addr */ 9939 0, /* saved_dvc_err_code */ 9940 0, /* saved_adv_err_code */ 9941 0, /* saved_adv_err_addr */ 9942 0 /* num_of_err */ 9943}; 9944 9945static ADVEEP_38C0800_CONFIG Default_38C0800_EEPROM_Config = { 9946 ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */ 9947 0x0000, /* 01 cfg_msw */ 9948 0xFFFF, /* 02 disc_enable */ 9949 0xFFFF, /* 03 wdtr_able */ 9950 0x4444, /* 04 sdtr_speed1 */ 9951 0xFFFF, /* 05 start_motor */ 9952 0xFFFF, /* 06 tagqng_able */ 9953 0xFFFF, /* 07 bios_scan */ 9954 0, /* 08 scam_tolerant */ 9955 7, /* 09 adapter_scsi_id */ 9956 0, /* bios_boot_delay */ 9957 3, /* 10 scsi_reset_delay */ 9958 0, /* bios_id_lun */ 9959 0, /* 11 termination_se */ 9960 0, /* termination_lvd */ 9961 0xFFE7, /* 12 bios_ctrl */ 9962 0x4444, /* 13 sdtr_speed2 */ 9963 0x4444, /* 14 sdtr_speed3 */ 9964 ASC_DEF_MAX_HOST_QNG, /* 15 max_host_qng */ 9965 ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */ 9966 0, /* 16 dvc_cntl */ 9967 0x4444, /* 17 sdtr_speed4 */ 9968 0, /* 18 serial_number_word1 */ 9969 0, /* 19 serial_number_word2 */ 9970 0, /* 20 serial_number_word3 */ 9971 0, /* 21 check_sum */ 9972 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} 9973 , /* 22-29 oem_name[16] */ 9974 0, /* 30 dvc_err_code */ 9975 0, /* 31 adv_err_code */ 9976 0, /* 32 adv_err_addr */ 9977 0, /* 33 saved_dvc_err_code */ 9978 0, /* 34 saved_adv_err_code */ 9979 0, /* 35 saved_adv_err_addr */ 9980 0, /* 36 reserved */ 9981 0, /* 37 reserved */ 9982 0, /* 38 reserved */ 9983 0, /* 39 reserved */ 9984 0, /* 40 reserved */ 9985 0, /* 41 reserved */ 9986 0, /* 42 reserved */ 9987 0, /* 43 reserved */ 9988 0, /* 44 reserved */ 9989 0, /* 45 reserved */ 9990 0, /* 46 reserved */ 9991 0, /* 47 reserved */ 9992 0, /* 48 reserved */ 9993 0, /* 49 reserved */ 9994 0, /* 50 reserved */ 9995 0, /* 51 reserved */ 9996 0, /* 52 reserved */ 9997 0, /* 53 reserved */ 9998 0, /* 54 reserved */ 9999 0, /* 55 reserved */ 10000 0, /* 56 cisptr_lsw */ 10001 0, /* 57 cisprt_msw */ 10002 PCI_VENDOR_ID_ASP, /* 58 subsysvid */ 10003 PCI_DEVICE_ID_38C0800_REV1, /* 59 subsysid */ 10004 0, /* 60 reserved */ 10005 0, /* 61 reserved */ 10006 0, /* 62 reserved */ 10007 0 /* 63 reserved */ 10008}; 10009 10010static ADVEEP_38C0800_CONFIG ADVEEP_38C0800_Config_Field_IsChar = { 10011 0, /* 00 cfg_lsw */ 10012 0, /* 01 cfg_msw */ 10013 0, /* 02 disc_enable */ 10014 0, /* 03 wdtr_able */ 10015 0, /* 04 sdtr_speed1 */ 10016 0, /* 05 start_motor */ 10017 0, /* 06 tagqng_able */ 10018 0, /* 07 bios_scan */ 10019 0, /* 08 scam_tolerant */ 10020 1, /* 09 adapter_scsi_id */ 10021 1, /* bios_boot_delay */ 10022 1, /* 10 scsi_reset_delay */ 10023 1, /* bios_id_lun */ 10024 1, /* 11 termination_se */ 10025 1, /* termination_lvd */ 10026 0, /* 12 bios_ctrl */ 10027 0, /* 13 sdtr_speed2 */ 10028 0, /* 14 sdtr_speed3 */ 10029 1, /* 15 max_host_qng */ 10030 1, /* max_dvc_qng */ 10031 0, /* 16 dvc_cntl */ 10032 0, /* 17 sdtr_speed4 */ 10033 0, /* 18 serial_number_word1 */ 10034 0, /* 19 serial_number_word2 */ 10035 0, /* 20 serial_number_word3 */ 10036 0, /* 21 check_sum */ 10037 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} 10038 , /* 22-29 oem_name[16] */ 10039 0, /* 30 dvc_err_code */ 10040 0, /* 31 adv_err_code */ 10041 0, /* 32 adv_err_addr */ 10042 0, /* 33 saved_dvc_err_code */ 10043 0, /* 34 saved_adv_err_code */ 10044 0, /* 35 saved_adv_err_addr */ 10045 0, /* 36 reserved */ 10046 0, /* 37 reserved */ 10047 0, /* 38 reserved */ 10048 0, /* 39 reserved */ 10049 0, /* 40 reserved */ 10050 0, /* 41 reserved */ 10051 0, /* 42 reserved */ 10052 0, /* 43 reserved */ 10053 0, /* 44 reserved */ 10054 0, /* 45 reserved */ 10055 0, /* 46 reserved */ 10056 0, /* 47 reserved */ 10057 0, /* 48 reserved */ 10058 0, /* 49 reserved */ 10059 0, /* 50 reserved */ 10060 0, /* 51 reserved */ 10061 0, /* 52 reserved */ 10062 0, /* 53 reserved */ 10063 0, /* 54 reserved */ 10064 0, /* 55 reserved */ 10065 0, /* 56 cisptr_lsw */ 10066 0, /* 57 cisprt_msw */ 10067 0, /* 58 subsysvid */ 10068 0, /* 59 subsysid */ 10069 0, /* 60 reserved */ 10070 0, /* 61 reserved */ 10071 0, /* 62 reserved */ 10072 0 /* 63 reserved */ 10073}; 10074 10075static ADVEEP_38C1600_CONFIG Default_38C1600_EEPROM_Config = { 10076 ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */ 10077 0x0000, /* 01 cfg_msw */ 10078 0xFFFF, /* 02 disc_enable */ 10079 0xFFFF, /* 03 wdtr_able */ 10080 0x5555, /* 04 sdtr_speed1 */ 10081 0xFFFF, /* 05 start_motor */ 10082 0xFFFF, /* 06 tagqng_able */ 10083 0xFFFF, /* 07 bios_scan */ 10084 0, /* 08 scam_tolerant */ 10085 7, /* 09 adapter_scsi_id */ 10086 0, /* bios_boot_delay */ 10087 3, /* 10 scsi_reset_delay */ 10088 0, /* bios_id_lun */ 10089 0, /* 11 termination_se */ 10090 0, /* termination_lvd */ 10091 0xFFE7, /* 12 bios_ctrl */ 10092 0x5555, /* 13 sdtr_speed2 */ 10093 0x5555, /* 14 sdtr_speed3 */ 10094 ASC_DEF_MAX_HOST_QNG, /* 15 max_host_qng */ 10095 ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */ 10096 0, /* 16 dvc_cntl */ 10097 0x5555, /* 17 sdtr_speed4 */ 10098 0, /* 18 serial_number_word1 */ 10099 0, /* 19 serial_number_word2 */ 10100 0, /* 20 serial_number_word3 */ 10101 0, /* 21 check_sum */ 10102 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} 10103 , /* 22-29 oem_name[16] */ 10104 0, /* 30 dvc_err_code */ 10105 0, /* 31 adv_err_code */ 10106 0, /* 32 adv_err_addr */ 10107 0, /* 33 saved_dvc_err_code */ 10108 0, /* 34 saved_adv_err_code */ 10109 0, /* 35 saved_adv_err_addr */ 10110 0, /* 36 reserved */ 10111 0, /* 37 reserved */ 10112 0, /* 38 reserved */ 10113 0, /* 39 reserved */ 10114 0, /* 40 reserved */ 10115 0, /* 41 reserved */ 10116 0, /* 42 reserved */ 10117 0, /* 43 reserved */ 10118 0, /* 44 reserved */ 10119 0, /* 45 reserved */ 10120 0, /* 46 reserved */ 10121 0, /* 47 reserved */ 10122 0, /* 48 reserved */ 10123 0, /* 49 reserved */ 10124 0, /* 50 reserved */ 10125 0, /* 51 reserved */ 10126 0, /* 52 reserved */ 10127 0, /* 53 reserved */ 10128 0, /* 54 reserved */ 10129 0, /* 55 reserved */ 10130 0, /* 56 cisptr_lsw */ 10131 0, /* 57 cisprt_msw */ 10132 PCI_VENDOR_ID_ASP, /* 58 subsysvid */ 10133 PCI_DEVICE_ID_38C1600_REV1, /* 59 subsysid */ 10134 0, /* 60 reserved */ 10135 0, /* 61 reserved */ 10136 0, /* 62 reserved */ 10137 0 /* 63 reserved */ 10138}; 10139 10140static ADVEEP_38C1600_CONFIG ADVEEP_38C1600_Config_Field_IsChar = { 10141 0, /* 00 cfg_lsw */ 10142 0, /* 01 cfg_msw */ 10143 0, /* 02 disc_enable */ 10144 0, /* 03 wdtr_able */ 10145 0, /* 04 sdtr_speed1 */ 10146 0, /* 05 start_motor */ 10147 0, /* 06 tagqng_able */ 10148 0, /* 07 bios_scan */ 10149 0, /* 08 scam_tolerant */ 10150 1, /* 09 adapter_scsi_id */ 10151 1, /* bios_boot_delay */ 10152 1, /* 10 scsi_reset_delay */ 10153 1, /* bios_id_lun */ 10154 1, /* 11 termination_se */ 10155 1, /* termination_lvd */ 10156 0, /* 12 bios_ctrl */ 10157 0, /* 13 sdtr_speed2 */ 10158 0, /* 14 sdtr_speed3 */ 10159 1, /* 15 max_host_qng */ 10160 1, /* max_dvc_qng */ 10161 0, /* 16 dvc_cntl */ 10162 0, /* 17 sdtr_speed4 */ 10163 0, /* 18 serial_number_word1 */ 10164 0, /* 19 serial_number_word2 */ 10165 0, /* 20 serial_number_word3 */ 10166 0, /* 21 check_sum */ 10167 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} 10168 , /* 22-29 oem_name[16] */ 10169 0, /* 30 dvc_err_code */ 10170 0, /* 31 adv_err_code */ 10171 0, /* 32 adv_err_addr */ 10172 0, /* 33 saved_dvc_err_code */ 10173 0, /* 34 saved_adv_err_code */ 10174 0, /* 35 saved_adv_err_addr */ 10175 0, /* 36 reserved */ 10176 0, /* 37 reserved */ 10177 0, /* 38 reserved */ 10178 0, /* 39 reserved */ 10179 0, /* 40 reserved */ 10180 0, /* 41 reserved */ 10181 0, /* 42 reserved */ 10182 0, /* 43 reserved */ 10183 0, /* 44 reserved */ 10184 0, /* 45 reserved */ 10185 0, /* 46 reserved */ 10186 0, /* 47 reserved */ 10187 0, /* 48 reserved */ 10188 0, /* 49 reserved */ 10189 0, /* 50 reserved */ 10190 0, /* 51 reserved */ 10191 0, /* 52 reserved */ 10192 0, /* 53 reserved */ 10193 0, /* 54 reserved */ 10194 0, /* 55 reserved */ 10195 0, /* 56 cisptr_lsw */ 10196 0, /* 57 cisprt_msw */ 10197 0, /* 58 subsysvid */ 10198 0, /* 59 subsysid */ 10199 0, /* 60 reserved */ 10200 0, /* 61 reserved */ 10201 0, /* 62 reserved */ 10202 0 /* 63 reserved */ 10203}; 10204 10205#ifdef CONFIG_PCI 10206/* 10207 * Wait for EEPROM command to complete 10208 */ 10209static void AdvWaitEEPCmd(AdvPortAddr iop_base) 10210{ 10211 int eep_delay_ms; 10212 10213 for (eep_delay_ms = 0; eep_delay_ms < ADV_EEP_DELAY_MS; eep_delay_ms++) { 10214 if (AdvReadWordRegister(iop_base, IOPW_EE_CMD) & 10215 ASC_EEP_CMD_DONE) { 10216 break; 10217 } 10218 mdelay(1); 10219 } 10220 if ((AdvReadWordRegister(iop_base, IOPW_EE_CMD) & ASC_EEP_CMD_DONE) == 10221 0) 10222 BUG(); 10223} 10224 10225/* 10226 * Read the EEPROM from specified location 10227 */ 10228static ushort AdvReadEEPWord(AdvPortAddr iop_base, int eep_word_addr) 10229{ 10230 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, 10231 ASC_EEP_CMD_READ | eep_word_addr); 10232 AdvWaitEEPCmd(iop_base); 10233 return AdvReadWordRegister(iop_base, IOPW_EE_DATA); 10234} 10235 10236/* 10237 * Write the EEPROM from 'cfg_buf'. 10238 */ 10239static void AdvSet3550EEPConfig(AdvPortAddr iop_base, 10240 ADVEEP_3550_CONFIG *cfg_buf) 10241{ 10242 ushort *wbuf; 10243 ushort addr, chksum; 10244 ushort *charfields; 10245 10246 wbuf = (ushort *)cfg_buf; 10247 charfields = (ushort *)&ADVEEP_3550_Config_Field_IsChar; 10248 chksum = 0; 10249 10250 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE); 10251 AdvWaitEEPCmd(iop_base); 10252 10253 /* 10254 * Write EEPROM from word 0 to word 20. 10255 */ 10256 for (addr = ADV_EEP_DVC_CFG_BEGIN; 10257 addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) { 10258 ushort word; 10259 10260 if (*charfields++) { 10261 word = cpu_to_le16(*wbuf); 10262 } else { 10263 word = *wbuf; 10264 } 10265 chksum += *wbuf; /* Checksum is calculated from word values. */ 10266 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); 10267 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, 10268 ASC_EEP_CMD_WRITE | addr); 10269 AdvWaitEEPCmd(iop_base); 10270 mdelay(ADV_EEP_DELAY_MS); 10271 } 10272 10273 /* 10274 * Write EEPROM checksum at word 21. 10275 */ 10276 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum); 10277 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr); 10278 AdvWaitEEPCmd(iop_base); 10279 wbuf++; 10280 charfields++; 10281 10282 /* 10283 * Write EEPROM OEM name at words 22 to 29. 10284 */ 10285 for (addr = ADV_EEP_DVC_CTL_BEGIN; 10286 addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) { 10287 ushort word; 10288 10289 if (*charfields++) { 10290 word = cpu_to_le16(*wbuf); 10291 } else { 10292 word = *wbuf; 10293 } 10294 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); 10295 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, 10296 ASC_EEP_CMD_WRITE | addr); 10297 AdvWaitEEPCmd(iop_base); 10298 } 10299 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE); 10300 AdvWaitEEPCmd(iop_base); 10301} 10302 10303/* 10304 * Write the EEPROM from 'cfg_buf'. 10305 */ 10306static void AdvSet38C0800EEPConfig(AdvPortAddr iop_base, 10307 ADVEEP_38C0800_CONFIG *cfg_buf) 10308{ 10309 ushort *wbuf; 10310 ushort *charfields; 10311 ushort addr, chksum; 10312 10313 wbuf = (ushort *)cfg_buf; 10314 charfields = (ushort *)&ADVEEP_38C0800_Config_Field_IsChar; 10315 chksum = 0; 10316 10317 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE); 10318 AdvWaitEEPCmd(iop_base); 10319 10320 /* 10321 * Write EEPROM from word 0 to word 20. 10322 */ 10323 for (addr = ADV_EEP_DVC_CFG_BEGIN; 10324 addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) { 10325 ushort word; 10326 10327 if (*charfields++) { 10328 word = cpu_to_le16(*wbuf); 10329 } else { 10330 word = *wbuf; 10331 } 10332 chksum += *wbuf; /* Checksum is calculated from word values. */ 10333 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); 10334 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, 10335 ASC_EEP_CMD_WRITE | addr); 10336 AdvWaitEEPCmd(iop_base); 10337 mdelay(ADV_EEP_DELAY_MS); 10338 } 10339 10340 /* 10341 * Write EEPROM checksum at word 21. 10342 */ 10343 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum); 10344 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr); 10345 AdvWaitEEPCmd(iop_base); 10346 wbuf++; 10347 charfields++; 10348 10349 /* 10350 * Write EEPROM OEM name at words 22 to 29. 10351 */ 10352 for (addr = ADV_EEP_DVC_CTL_BEGIN; 10353 addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) { 10354 ushort word; 10355 10356 if (*charfields++) { 10357 word = cpu_to_le16(*wbuf); 10358 } else { 10359 word = *wbuf; 10360 } 10361 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); 10362 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, 10363 ASC_EEP_CMD_WRITE | addr); 10364 AdvWaitEEPCmd(iop_base); 10365 } 10366 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE); 10367 AdvWaitEEPCmd(iop_base); 10368} 10369 10370/* 10371 * Write the EEPROM from 'cfg_buf'. 10372 */ 10373static void AdvSet38C1600EEPConfig(AdvPortAddr iop_base, 10374 ADVEEP_38C1600_CONFIG *cfg_buf) 10375{ 10376 ushort *wbuf; 10377 ushort *charfields; 10378 ushort addr, chksum; 10379 10380 wbuf = (ushort *)cfg_buf; 10381 charfields = (ushort *)&ADVEEP_38C1600_Config_Field_IsChar; 10382 chksum = 0; 10383 10384 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE); 10385 AdvWaitEEPCmd(iop_base); 10386 10387 /* 10388 * Write EEPROM from word 0 to word 20. 10389 */ 10390 for (addr = ADV_EEP_DVC_CFG_BEGIN; 10391 addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) { 10392 ushort word; 10393 10394 if (*charfields++) { 10395 word = cpu_to_le16(*wbuf); 10396 } else { 10397 word = *wbuf; 10398 } 10399 chksum += *wbuf; /* Checksum is calculated from word values. */ 10400 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); 10401 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, 10402 ASC_EEP_CMD_WRITE | addr); 10403 AdvWaitEEPCmd(iop_base); 10404 mdelay(ADV_EEP_DELAY_MS); 10405 } 10406 10407 /* 10408 * Write EEPROM checksum at word 21. 10409 */ 10410 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum); 10411 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr); 10412 AdvWaitEEPCmd(iop_base); 10413 wbuf++; 10414 charfields++; 10415 10416 /* 10417 * Write EEPROM OEM name at words 22 to 29. 10418 */ 10419 for (addr = ADV_EEP_DVC_CTL_BEGIN; 10420 addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) { 10421 ushort word; 10422 10423 if (*charfields++) { 10424 word = cpu_to_le16(*wbuf); 10425 } else { 10426 word = *wbuf; 10427 } 10428 AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); 10429 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, 10430 ASC_EEP_CMD_WRITE | addr); 10431 AdvWaitEEPCmd(iop_base); 10432 } 10433 AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE); 10434 AdvWaitEEPCmd(iop_base); 10435} 10436 10437/* 10438 * Read EEPROM configuration into the specified buffer. 10439 * 10440 * Return a checksum based on the EEPROM configuration read. 10441 */ 10442static ushort AdvGet3550EEPConfig(AdvPortAddr iop_base, 10443 ADVEEP_3550_CONFIG *cfg_buf) 10444{ 10445 ushort wval, chksum; 10446 ushort *wbuf; 10447 int eep_addr; 10448 ushort *charfields; 10449 10450 charfields = (ushort *)&ADVEEP_3550_Config_Field_IsChar; 10451 wbuf = (ushort *)cfg_buf; 10452 chksum = 0; 10453 10454 for (eep_addr = ADV_EEP_DVC_CFG_BEGIN; 10455 eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) { 10456 wval = AdvReadEEPWord(iop_base, eep_addr); 10457 chksum += wval; /* Checksum is calculated from word values. */ 10458 if (*charfields++) { 10459 *wbuf = le16_to_cpu(wval); 10460 } else { 10461 *wbuf = wval; 10462 } 10463 } 10464 /* Read checksum word. */ 10465 *wbuf = AdvReadEEPWord(iop_base, eep_addr); 10466 wbuf++; 10467 charfields++; 10468 10469 /* Read rest of EEPROM not covered by the checksum. */ 10470 for (eep_addr = ADV_EEP_DVC_CTL_BEGIN; 10471 eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) { 10472 *wbuf = AdvReadEEPWord(iop_base, eep_addr); 10473 if (*charfields++) { 10474 *wbuf = le16_to_cpu(*wbuf); 10475 } 10476 } 10477 return chksum; 10478} 10479 10480/* 10481 * Read EEPROM configuration into the specified buffer. 10482 * 10483 * Return a checksum based on the EEPROM configuration read. 10484 */ 10485static ushort AdvGet38C0800EEPConfig(AdvPortAddr iop_base, 10486 ADVEEP_38C0800_CONFIG *cfg_buf) 10487{ 10488 ushort wval, chksum; 10489 ushort *wbuf; 10490 int eep_addr; 10491 ushort *charfields; 10492 10493 charfields = (ushort *)&ADVEEP_38C0800_Config_Field_IsChar; 10494 wbuf = (ushort *)cfg_buf; 10495 chksum = 0; 10496 10497 for (eep_addr = ADV_EEP_DVC_CFG_BEGIN; 10498 eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) { 10499 wval = AdvReadEEPWord(iop_base, eep_addr); 10500 chksum += wval; /* Checksum is calculated from word values. */ 10501 if (*charfields++) { 10502 *wbuf = le16_to_cpu(wval); 10503 } else { 10504 *wbuf = wval; 10505 } 10506 } 10507 /* Read checksum word. */ 10508 *wbuf = AdvReadEEPWord(iop_base, eep_addr); 10509 wbuf++; 10510 charfields++; 10511 10512 /* Read rest of EEPROM not covered by the checksum. */ 10513 for (eep_addr = ADV_EEP_DVC_CTL_BEGIN; 10514 eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) { 10515 *wbuf = AdvReadEEPWord(iop_base, eep_addr); 10516 if (*charfields++) { 10517 *wbuf = le16_to_cpu(*wbuf); 10518 } 10519 } 10520 return chksum; 10521} 10522 10523/* 10524 * Read EEPROM configuration into the specified buffer. 10525 * 10526 * Return a checksum based on the EEPROM configuration read. 10527 */ 10528static ushort AdvGet38C1600EEPConfig(AdvPortAddr iop_base, 10529 ADVEEP_38C1600_CONFIG *cfg_buf) 10530{ 10531 ushort wval, chksum; 10532 ushort *wbuf; 10533 int eep_addr; 10534 ushort *charfields; 10535 10536 charfields = (ushort *)&ADVEEP_38C1600_Config_Field_IsChar; 10537 wbuf = (ushort *)cfg_buf; 10538 chksum = 0; 10539 10540 for (eep_addr = ADV_EEP_DVC_CFG_BEGIN; 10541 eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) { 10542 wval = AdvReadEEPWord(iop_base, eep_addr); 10543 chksum += wval; /* Checksum is calculated from word values. */ 10544 if (*charfields++) { 10545 *wbuf = le16_to_cpu(wval); 10546 } else { 10547 *wbuf = wval; 10548 } 10549 } 10550 /* Read checksum word. */ 10551 *wbuf = AdvReadEEPWord(iop_base, eep_addr); 10552 wbuf++; 10553 charfields++; 10554 10555 /* Read rest of EEPROM not covered by the checksum. */ 10556 for (eep_addr = ADV_EEP_DVC_CTL_BEGIN; 10557 eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) { 10558 *wbuf = AdvReadEEPWord(iop_base, eep_addr); 10559 if (*charfields++) { 10560 *wbuf = le16_to_cpu(*wbuf); 10561 } 10562 } 10563 return chksum; 10564} 10565 10566/* 10567 * Read the board's EEPROM configuration. Set fields in ADV_DVC_VAR and 10568 * ADV_DVC_CFG based on the EEPROM settings. The chip is stopped while 10569 * all of this is done. 10570 * 10571 * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. 10572 * 10573 * For a non-fatal error return a warning code. If there are no warnings 10574 * then 0 is returned. 10575 * 10576 * Note: Chip is stopped on entry. 10577 */ 10578static int AdvInitFrom3550EEP(ADV_DVC_VAR *asc_dvc) 10579{ 10580 AdvPortAddr iop_base; 10581 ushort warn_code; 10582 ADVEEP_3550_CONFIG eep_config; 10583 10584 iop_base = asc_dvc->iop_base; 10585 10586 warn_code = 0; 10587 10588 /* 10589 * Read the board's EEPROM configuration. 10590 * 10591 * Set default values if a bad checksum is found. 10592 */ 10593 if (AdvGet3550EEPConfig(iop_base, &eep_config) != eep_config.check_sum) { 10594 warn_code |= ASC_WARN_EEPROM_CHKSUM; 10595 10596 /* 10597 * Set EEPROM default values. 10598 */ 10599 memcpy(&eep_config, &Default_3550_EEPROM_Config, 10600 sizeof(ADVEEP_3550_CONFIG)); 10601 10602 /* 10603 * Assume the 6 byte board serial number that was read from 10604 * EEPROM is correct even if the EEPROM checksum failed. 10605 */ 10606 eep_config.serial_number_word3 = 10607 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1); 10608 10609 eep_config.serial_number_word2 = 10610 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2); 10611 10612 eep_config.serial_number_word1 = 10613 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3); 10614 10615 AdvSet3550EEPConfig(iop_base, &eep_config); 10616 } 10617 /* 10618 * Set ASC_DVC_VAR and ASC_DVC_CFG variables from the 10619 * EEPROM configuration that was read. 10620 * 10621 * This is the mapping of EEPROM fields to Adv Library fields. 10622 */ 10623 asc_dvc->wdtr_able = eep_config.wdtr_able; 10624 asc_dvc->sdtr_able = eep_config.sdtr_able; 10625 asc_dvc->ultra_able = eep_config.ultra_able; 10626 asc_dvc->tagqng_able = eep_config.tagqng_able; 10627 asc_dvc->cfg->disc_enable = eep_config.disc_enable; 10628 asc_dvc->max_host_qng = eep_config.max_host_qng; 10629 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; 10630 asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ADV_MAX_TID); 10631 asc_dvc->start_motor = eep_config.start_motor; 10632 asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay; 10633 asc_dvc->bios_ctrl = eep_config.bios_ctrl; 10634 asc_dvc->no_scam = eep_config.scam_tolerant; 10635 asc_dvc->cfg->serial1 = eep_config.serial_number_word1; 10636 asc_dvc->cfg->serial2 = eep_config.serial_number_word2; 10637 asc_dvc->cfg->serial3 = eep_config.serial_number_word3; 10638 10639 /* 10640 * Set the host maximum queuing (max. 253, min. 16) and the per device 10641 * maximum queuing (max. 63, min. 4). 10642 */ 10643 if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) { 10644 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; 10645 } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) { 10646 /* If the value is zero, assume it is uninitialized. */ 10647 if (eep_config.max_host_qng == 0) { 10648 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; 10649 } else { 10650 eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG; 10651 } 10652 } 10653 10654 if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) { 10655 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; 10656 } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) { 10657 /* If the value is zero, assume it is uninitialized. */ 10658 if (eep_config.max_dvc_qng == 0) { 10659 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; 10660 } else { 10661 eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG; 10662 } 10663 } 10664 10665 /* 10666 * If 'max_dvc_qng' is greater than 'max_host_qng', then 10667 * set 'max_dvc_qng' to 'max_host_qng'. 10668 */ 10669 if (eep_config.max_dvc_qng > eep_config.max_host_qng) { 10670 eep_config.max_dvc_qng = eep_config.max_host_qng; 10671 } 10672 10673 /* 10674 * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_VAR 'max_dvc_qng' 10675 * values based on possibly adjusted EEPROM values. 10676 */ 10677 asc_dvc->max_host_qng = eep_config.max_host_qng; 10678 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; 10679 10680 /* 10681 * If the EEPROM 'termination' field is set to automatic (0), then set 10682 * the ADV_DVC_CFG 'termination' field to automatic also. 10683 * 10684 * If the termination is specified with a non-zero 'termination' 10685 * value check that a legal value is set and set the ADV_DVC_CFG 10686 * 'termination' field appropriately. 10687 */ 10688 if (eep_config.termination == 0) { 10689 asc_dvc->cfg->termination = 0; /* auto termination */ 10690 } else { 10691 /* Enable manual control with low off / high off. */ 10692 if (eep_config.termination == 1) { 10693 asc_dvc->cfg->termination = TERM_CTL_SEL; 10694 10695 /* Enable manual control with low off / high on. */ 10696 } else if (eep_config.termination == 2) { 10697 asc_dvc->cfg->termination = TERM_CTL_SEL | TERM_CTL_H; 10698 10699 /* Enable manual control with low on / high on. */ 10700 } else if (eep_config.termination == 3) { 10701 asc_dvc->cfg->termination = 10702 TERM_CTL_SEL | TERM_CTL_H | TERM_CTL_L; 10703 } else { 10704 /* 10705 * The EEPROM 'termination' field contains a bad value. Use 10706 * automatic termination instead. 10707 */ 10708 asc_dvc->cfg->termination = 0; 10709 warn_code |= ASC_WARN_EEPROM_TERMINATION; 10710 } 10711 } 10712 10713 return warn_code; 10714} 10715 10716/* 10717 * Read the board's EEPROM configuration. Set fields in ADV_DVC_VAR and 10718 * ADV_DVC_CFG based on the EEPROM settings. The chip is stopped while 10719 * all of this is done. 10720 * 10721 * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. 10722 * 10723 * For a non-fatal error return a warning code. If there are no warnings 10724 * then 0 is returned. 10725 * 10726 * Note: Chip is stopped on entry. 10727 */ 10728static int AdvInitFrom38C0800EEP(ADV_DVC_VAR *asc_dvc) 10729{ 10730 AdvPortAddr iop_base; 10731 ushort warn_code; 10732 ADVEEP_38C0800_CONFIG eep_config; 10733 uchar tid, termination; 10734 ushort sdtr_speed = 0; 10735 10736 iop_base = asc_dvc->iop_base; 10737 10738 warn_code = 0; 10739 10740 /* 10741 * Read the board's EEPROM configuration. 10742 * 10743 * Set default values if a bad checksum is found. 10744 */ 10745 if (AdvGet38C0800EEPConfig(iop_base, &eep_config) != 10746 eep_config.check_sum) { 10747 warn_code |= ASC_WARN_EEPROM_CHKSUM; 10748 10749 /* 10750 * Set EEPROM default values. 10751 */ 10752 memcpy(&eep_config, &Default_38C0800_EEPROM_Config, 10753 sizeof(ADVEEP_38C0800_CONFIG)); 10754 10755 /* 10756 * Assume the 6 byte board serial number that was read from 10757 * EEPROM is correct even if the EEPROM checksum failed. 10758 */ 10759 eep_config.serial_number_word3 = 10760 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1); 10761 10762 eep_config.serial_number_word2 = 10763 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2); 10764 10765 eep_config.serial_number_word1 = 10766 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3); 10767 10768 AdvSet38C0800EEPConfig(iop_base, &eep_config); 10769 } 10770 /* 10771 * Set ADV_DVC_VAR and ADV_DVC_CFG variables from the 10772 * EEPROM configuration that was read. 10773 * 10774 * This is the mapping of EEPROM fields to Adv Library fields. 10775 */ 10776 asc_dvc->wdtr_able = eep_config.wdtr_able; 10777 asc_dvc->sdtr_speed1 = eep_config.sdtr_speed1; 10778 asc_dvc->sdtr_speed2 = eep_config.sdtr_speed2; 10779 asc_dvc->sdtr_speed3 = eep_config.sdtr_speed3; 10780 asc_dvc->sdtr_speed4 = eep_config.sdtr_speed4; 10781 asc_dvc->tagqng_able = eep_config.tagqng_able; 10782 asc_dvc->cfg->disc_enable = eep_config.disc_enable; 10783 asc_dvc->max_host_qng = eep_config.max_host_qng; 10784 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; 10785 asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ADV_MAX_TID); 10786 asc_dvc->start_motor = eep_config.start_motor; 10787 asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay; 10788 asc_dvc->bios_ctrl = eep_config.bios_ctrl; 10789 asc_dvc->no_scam = eep_config.scam_tolerant; 10790 asc_dvc->cfg->serial1 = eep_config.serial_number_word1; 10791 asc_dvc->cfg->serial2 = eep_config.serial_number_word2; 10792 asc_dvc->cfg->serial3 = eep_config.serial_number_word3; 10793 10794 /* 10795 * For every Target ID if any of its 'sdtr_speed[1234]' bits 10796 * are set, then set an 'sdtr_able' bit for it. 10797 */ 10798 asc_dvc->sdtr_able = 0; 10799 for (tid = 0; tid <= ADV_MAX_TID; tid++) { 10800 if (tid == 0) { 10801 sdtr_speed = asc_dvc->sdtr_speed1; 10802 } else if (tid == 4) { 10803 sdtr_speed = asc_dvc->sdtr_speed2; 10804 } else if (tid == 8) { 10805 sdtr_speed = asc_dvc->sdtr_speed3; 10806 } else if (tid == 12) { 10807 sdtr_speed = asc_dvc->sdtr_speed4; 10808 } 10809 if (sdtr_speed & ADV_MAX_TID) { 10810 asc_dvc->sdtr_able |= (1 << tid); 10811 } 10812 sdtr_speed >>= 4; 10813 } 10814 10815 /* 10816 * Set the host maximum queuing (max. 253, min. 16) and the per device 10817 * maximum queuing (max. 63, min. 4). 10818 */ 10819 if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) { 10820 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; 10821 } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) { 10822 /* If the value is zero, assume it is uninitialized. */ 10823 if (eep_config.max_host_qng == 0) { 10824 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; 10825 } else { 10826 eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG; 10827 } 10828 } 10829 10830 if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) { 10831 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; 10832 } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) { 10833 /* If the value is zero, assume it is uninitialized. */ 10834 if (eep_config.max_dvc_qng == 0) { 10835 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; 10836 } else { 10837 eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG; 10838 } 10839 } 10840 10841 /* 10842 * If 'max_dvc_qng' is greater than 'max_host_qng', then 10843 * set 'max_dvc_qng' to 'max_host_qng'. 10844 */ 10845 if (eep_config.max_dvc_qng > eep_config.max_host_qng) { 10846 eep_config.max_dvc_qng = eep_config.max_host_qng; 10847 } 10848 10849 /* 10850 * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_VAR 'max_dvc_qng' 10851 * values based on possibly adjusted EEPROM values. 10852 */ 10853 asc_dvc->max_host_qng = eep_config.max_host_qng; 10854 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; 10855 10856 /* 10857 * If the EEPROM 'termination' field is set to automatic (0), then set 10858 * the ADV_DVC_CFG 'termination' field to automatic also. 10859 * 10860 * If the termination is specified with a non-zero 'termination' 10861 * value check that a legal value is set and set the ADV_DVC_CFG 10862 * 'termination' field appropriately. 10863 */ 10864 if (eep_config.termination_se == 0) { 10865 termination = 0; /* auto termination for SE */ 10866 } else { 10867 /* Enable manual control with low off / high off. */ 10868 if (eep_config.termination_se == 1) { 10869 termination = 0; 10870 10871 /* Enable manual control with low off / high on. */ 10872 } else if (eep_config.termination_se == 2) { 10873 termination = TERM_SE_HI; 10874 10875 /* Enable manual control with low on / high on. */ 10876 } else if (eep_config.termination_se == 3) { 10877 termination = TERM_SE; 10878 } else { 10879 /* 10880 * The EEPROM 'termination_se' field contains a bad value. 10881 * Use automatic termination instead. 10882 */ 10883 termination = 0; 10884 warn_code |= ASC_WARN_EEPROM_TERMINATION; 10885 } 10886 } 10887 10888 if (eep_config.termination_lvd == 0) { 10889 asc_dvc->cfg->termination = termination; /* auto termination for LVD */ 10890 } else { 10891 /* Enable manual control with low off / high off. */ 10892 if (eep_config.termination_lvd == 1) { 10893 asc_dvc->cfg->termination = termination; 10894 10895 /* Enable manual control with low off / high on. */ 10896 } else if (eep_config.termination_lvd == 2) { 10897 asc_dvc->cfg->termination = termination | TERM_LVD_HI; 10898 10899 /* Enable manual control with low on / high on. */ 10900 } else if (eep_config.termination_lvd == 3) { 10901 asc_dvc->cfg->termination = termination | TERM_LVD; 10902 } else { 10903 /* 10904 * The EEPROM 'termination_lvd' field contains a bad value. 10905 * Use automatic termination instead. 10906 */ 10907 asc_dvc->cfg->termination = termination; 10908 warn_code |= ASC_WARN_EEPROM_TERMINATION; 10909 } 10910 } 10911 10912 return warn_code; 10913} 10914 10915/* 10916 * Read the board's EEPROM configuration. Set fields in ASC_DVC_VAR and 10917 * ASC_DVC_CFG based on the EEPROM settings. The chip is stopped while 10918 * all of this is done. 10919 * 10920 * On failure set the ASC_DVC_VAR field 'err_code' and return ADV_ERROR. 10921 * 10922 * For a non-fatal error return a warning code. If there are no warnings 10923 * then 0 is returned. 10924 * 10925 * Note: Chip is stopped on entry. 10926 */ 10927static int AdvInitFrom38C1600EEP(ADV_DVC_VAR *asc_dvc) 10928{ 10929 AdvPortAddr iop_base; 10930 ushort warn_code; 10931 ADVEEP_38C1600_CONFIG eep_config; 10932 uchar tid, termination; 10933 ushort sdtr_speed = 0; 10934 10935 iop_base = asc_dvc->iop_base; 10936 10937 warn_code = 0; 10938 10939 /* 10940 * Read the board's EEPROM configuration. 10941 * 10942 * Set default values if a bad checksum is found. 10943 */ 10944 if (AdvGet38C1600EEPConfig(iop_base, &eep_config) != 10945 eep_config.check_sum) { 10946 struct pci_dev *pdev = adv_dvc_to_pdev(asc_dvc); 10947 warn_code |= ASC_WARN_EEPROM_CHKSUM; 10948 10949 /* 10950 * Set EEPROM default values. 10951 */ 10952 memcpy(&eep_config, &Default_38C1600_EEPROM_Config, 10953 sizeof(ADVEEP_38C1600_CONFIG)); 10954 10955 if (PCI_FUNC(pdev->devfn) != 0) { 10956 u8 ints; 10957 /* 10958 * Disable Bit 14 (BIOS_ENABLE) to fix SPARC Ultra 60 10959 * and old Mac system booting problem. The Expansion 10960 * ROM must be disabled in Function 1 for these systems 10961 */ 10962 eep_config.cfg_lsw &= ~ADV_EEPROM_BIOS_ENABLE; 10963 /* 10964 * Clear the INTAB (bit 11) if the GPIO 0 input 10965 * indicates the Function 1 interrupt line is wired 10966 * to INTB. 10967 * 10968 * Set/Clear Bit 11 (INTAB) from the GPIO bit 0 input: 10969 * 1 - Function 1 interrupt line wired to INT A. 10970 * 0 - Function 1 interrupt line wired to INT B. 10971 * 10972 * Note: Function 0 is always wired to INTA. 10973 * Put all 5 GPIO bits in input mode and then read 10974 * their input values. 10975 */ 10976 AdvWriteByteRegister(iop_base, IOPB_GPIO_CNTL, 0); 10977 ints = AdvReadByteRegister(iop_base, IOPB_GPIO_DATA); 10978 if ((ints & 0x01) == 0) 10979 eep_config.cfg_lsw &= ~ADV_EEPROM_INTAB; 10980 } 10981 10982 /* 10983 * Assume the 6 byte board serial number that was read from 10984 * EEPROM is correct even if the EEPROM checksum failed. 10985 */ 10986 eep_config.serial_number_word3 = 10987 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1); 10988 eep_config.serial_number_word2 = 10989 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2); 10990 eep_config.serial_number_word1 = 10991 AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3); 10992 10993 AdvSet38C1600EEPConfig(iop_base, &eep_config); 10994 } 10995 10996 /* 10997 * Set ASC_DVC_VAR and ASC_DVC_CFG variables from the 10998 * EEPROM configuration that was read. 10999 * 11000 * This is the mapping of EEPROM fields to Adv Library fields. 11001 */ 11002 asc_dvc->wdtr_able = eep_config.wdtr_able; 11003 asc_dvc->sdtr_speed1 = eep_config.sdtr_speed1; 11004 asc_dvc->sdtr_speed2 = eep_config.sdtr_speed2; 11005 asc_dvc->sdtr_speed3 = eep_config.sdtr_speed3; 11006 asc_dvc->sdtr_speed4 = eep_config.sdtr_speed4; 11007 asc_dvc->ppr_able = 0; 11008 asc_dvc->tagqng_able = eep_config.tagqng_able; 11009 asc_dvc->cfg->disc_enable = eep_config.disc_enable; 11010 asc_dvc->max_host_qng = eep_config.max_host_qng; 11011 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; 11012 asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ASC_MAX_TID); 11013 asc_dvc->start_motor = eep_config.start_motor; 11014 asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay; 11015 asc_dvc->bios_ctrl = eep_config.bios_ctrl; 11016 asc_dvc->no_scam = eep_config.scam_tolerant; 11017 11018 /* 11019 * For every Target ID if any of its 'sdtr_speed[1234]' bits 11020 * are set, then set an 'sdtr_able' bit for it. 11021 */ 11022 asc_dvc->sdtr_able = 0; 11023 for (tid = 0; tid <= ASC_MAX_TID; tid++) { 11024 if (tid == 0) { 11025 sdtr_speed = asc_dvc->sdtr_speed1; 11026 } else if (tid == 4) { 11027 sdtr_speed = asc_dvc->sdtr_speed2; 11028 } else if (tid == 8) { 11029 sdtr_speed = asc_dvc->sdtr_speed3; 11030 } else if (tid == 12) { 11031 sdtr_speed = asc_dvc->sdtr_speed4; 11032 } 11033 if (sdtr_speed & ASC_MAX_TID) { 11034 asc_dvc->sdtr_able |= (1 << tid); 11035 } 11036 sdtr_speed >>= 4; 11037 } 11038 11039 /* 11040 * Set the host maximum queuing (max. 253, min. 16) and the per device 11041 * maximum queuing (max. 63, min. 4). 11042 */ 11043 if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) { 11044 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; 11045 } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) { 11046 /* If the value is zero, assume it is uninitialized. */ 11047 if (eep_config.max_host_qng == 0) { 11048 eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; 11049 } else { 11050 eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG; 11051 } 11052 } 11053 11054 if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) { 11055 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; 11056 } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) { 11057 /* If the value is zero, assume it is uninitialized. */ 11058 if (eep_config.max_dvc_qng == 0) { 11059 eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; 11060 } else { 11061 eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG; 11062 } 11063 } 11064 11065 /* 11066 * If 'max_dvc_qng' is greater than 'max_host_qng', then 11067 * set 'max_dvc_qng' to 'max_host_qng'. 11068 */ 11069 if (eep_config.max_dvc_qng > eep_config.max_host_qng) { 11070 eep_config.max_dvc_qng = eep_config.max_host_qng; 11071 } 11072 11073 /* 11074 * Set ASC_DVC_VAR 'max_host_qng' and ASC_DVC_VAR 'max_dvc_qng' 11075 * values based on possibly adjusted EEPROM values. 11076 */ 11077 asc_dvc->max_host_qng = eep_config.max_host_qng; 11078 asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; 11079 11080 /* 11081 * If the EEPROM 'termination' field is set to automatic (0), then set 11082 * the ASC_DVC_CFG 'termination' field to automatic also. 11083 * 11084 * If the termination is specified with a non-zero 'termination' 11085 * value check that a legal value is set and set the ASC_DVC_CFG 11086 * 'termination' field appropriately. 11087 */ 11088 if (eep_config.termination_se == 0) { 11089 termination = 0; /* auto termination for SE */ 11090 } else { 11091 /* Enable manual control with low off / high off. */ 11092 if (eep_config.termination_se == 1) { 11093 termination = 0; 11094 11095 /* Enable manual control with low off / high on. */ 11096 } else if (eep_config.termination_se == 2) { 11097 termination = TERM_SE_HI; 11098 11099 /* Enable manual control with low on / high on. */ 11100 } else if (eep_config.termination_se == 3) { 11101 termination = TERM_SE; 11102 } else { 11103 /* 11104 * The EEPROM 'termination_se' field contains a bad value. 11105 * Use automatic termination instead. 11106 */ 11107 termination = 0; 11108 warn_code |= ASC_WARN_EEPROM_TERMINATION; 11109 } 11110 } 11111 11112 if (eep_config.termination_lvd == 0) { 11113 asc_dvc->cfg->termination = termination; /* auto termination for LVD */ 11114 } else { 11115 /* Enable manual control with low off / high off. */ 11116 if (eep_config.termination_lvd == 1) { 11117 asc_dvc->cfg->termination = termination; 11118 11119 /* Enable manual control with low off / high on. */ 11120 } else if (eep_config.termination_lvd == 2) { 11121 asc_dvc->cfg->termination = termination | TERM_LVD_HI; 11122 11123 /* Enable manual control with low on / high on. */ 11124 } else if (eep_config.termination_lvd == 3) { 11125 asc_dvc->cfg->termination = termination | TERM_LVD; 11126 } else { 11127 /* 11128 * The EEPROM 'termination_lvd' field contains a bad value. 11129 * Use automatic termination instead. 11130 */ 11131 asc_dvc->cfg->termination = termination; 11132 warn_code |= ASC_WARN_EEPROM_TERMINATION; 11133 } 11134 } 11135 11136 return warn_code; 11137} 11138 11139/* 11140 * Initialize the ADV_DVC_VAR structure. 11141 * 11142 * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. 11143 * 11144 * For a non-fatal error return a warning code. If there are no warnings 11145 * then 0 is returned. 11146 */ 11147static int AdvInitGetConfig(struct pci_dev *pdev, struct Scsi_Host *shost) 11148{ 11149 struct asc_board *board = shost_priv(shost); 11150 ADV_DVC_VAR *asc_dvc = &board->dvc_var.adv_dvc_var; 11151 unsigned short warn_code = 0; 11152 AdvPortAddr iop_base = asc_dvc->iop_base; 11153 u16 cmd; 11154 int status; 11155 11156 asc_dvc->err_code = 0; 11157 11158 /* 11159 * Save the state of the PCI Configuration Command Register 11160 * "Parity Error Response Control" Bit. If the bit is clear (0), 11161 * in AdvInitAsc3550/38C0800Driver() tell the microcode to ignore 11162 * DMA parity errors. 11163 */ 11164 asc_dvc->cfg->control_flag = 0; 11165 pci_read_config_word(pdev, PCI_COMMAND, &cmd); 11166 if ((cmd & PCI_COMMAND_PARITY) == 0) 11167 asc_dvc->cfg->control_flag |= CONTROL_FLAG_IGNORE_PERR; 11168 11169 asc_dvc->cfg->chip_version = 11170 AdvGetChipVersion(iop_base, asc_dvc->bus_type); 11171 11172 ASC_DBG(1, "iopb_chip_id_1: 0x%x 0x%x\n", 11173 (ushort)AdvReadByteRegister(iop_base, IOPB_CHIP_ID_1), 11174 (ushort)ADV_CHIP_ID_BYTE); 11175 11176 ASC_DBG(1, "iopw_chip_id_0: 0x%x 0x%x\n", 11177 (ushort)AdvReadWordRegister(iop_base, IOPW_CHIP_ID_0), 11178 (ushort)ADV_CHIP_ID_WORD); 11179 11180 /* 11181 * Reset the chip to start and allow register writes. 11182 */ 11183 if (AdvFindSignature(iop_base) == 0) { 11184 asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; 11185 return ADV_ERROR; 11186 } else { 11187 /* 11188 * The caller must set 'chip_type' to a valid setting. 11189 */ 11190 if (asc_dvc->chip_type != ADV_CHIP_ASC3550 && 11191 asc_dvc->chip_type != ADV_CHIP_ASC38C0800 && 11192 asc_dvc->chip_type != ADV_CHIP_ASC38C1600) { 11193 asc_dvc->err_code |= ASC_IERR_BAD_CHIPTYPE; 11194 return ADV_ERROR; 11195 } 11196 11197 /* 11198 * Reset Chip. 11199 */ 11200 AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, 11201 ADV_CTRL_REG_CMD_RESET); 11202 mdelay(100); 11203 AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, 11204 ADV_CTRL_REG_CMD_WR_IO_REG); 11205 11206 if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { 11207 status = AdvInitFrom38C1600EEP(asc_dvc); 11208 } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { 11209 status = AdvInitFrom38C0800EEP(asc_dvc); 11210 } else { 11211 status = AdvInitFrom3550EEP(asc_dvc); 11212 } 11213 warn_code |= status; 11214 } 11215 11216 if (warn_code != 0) 11217 shost_printk(KERN_WARNING, shost, "warning: 0x%x\n", warn_code); 11218 11219 if (asc_dvc->err_code) 11220 shost_printk(KERN_ERR, shost, "error code 0x%x\n", 11221 asc_dvc->err_code); 11222 11223 return asc_dvc->err_code; 11224} 11225#endif 11226 11227static struct scsi_host_template advansys_template = { 11228 .proc_name = DRV_NAME, 11229#ifdef CONFIG_PROC_FS 11230 .show_info = advansys_show_info, 11231#endif 11232 .name = DRV_NAME, 11233 .info = advansys_info, 11234 .queuecommand = advansys_queuecommand, 11235 .eh_bus_reset_handler = advansys_reset, 11236 .bios_param = advansys_biosparam, 11237 .slave_configure = advansys_slave_configure, 11238 /* 11239 * Because the driver may control an ISA adapter 'unchecked_isa_dma' 11240 * must be set. The flag will be cleared in advansys_board_found 11241 * for non-ISA adapters. 11242 */ 11243 .unchecked_isa_dma = 1, 11244 /* 11245 * All adapters controlled by this driver are capable of large 11246 * scatter-gather lists. According to the mid-level SCSI documentation 11247 * this obviates any performance gain provided by setting 11248 * 'use_clustering'. But empirically while CPU utilization is increased 11249 * by enabling clustering, I/O throughput increases as well. 11250 */ 11251 .use_clustering = ENABLE_CLUSTERING, 11252}; 11253 11254static int advansys_wide_init_chip(struct Scsi_Host *shost) 11255{ 11256 struct asc_board *board = shost_priv(shost); 11257 struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var; 11258 int req_cnt = 0; 11259 adv_req_t *reqp = NULL; 11260 int sg_cnt = 0; 11261 adv_sgblk_t *sgp; 11262 int warn_code, err_code; 11263 11264 /* 11265 * Allocate buffer carrier structures. The total size 11266 * is about 4 KB, so allocate all at once. 11267 */ 11268 adv_dvc->carrier_buf = kmalloc(ADV_CARRIER_BUFSIZE, GFP_KERNEL); 11269 ASC_DBG(1, "carrier_buf 0x%p\n", adv_dvc->carrier_buf); 11270 11271 if (!adv_dvc->carrier_buf) 11272 goto kmalloc_failed; 11273 11274 /* 11275 * Allocate up to 'max_host_qng' request structures for the Wide 11276 * board. The total size is about 16 KB, so allocate all at once. 11277 * If the allocation fails decrement and try again. 11278 */ 11279 for (req_cnt = adv_dvc->max_host_qng; req_cnt > 0; req_cnt--) { 11280 reqp = kmalloc(sizeof(adv_req_t) * req_cnt, GFP_KERNEL); 11281 11282 ASC_DBG(1, "reqp 0x%p, req_cnt %d, bytes %lu\n", reqp, req_cnt, 11283 (ulong)sizeof(adv_req_t) * req_cnt); 11284 11285 if (reqp) 11286 break; 11287 } 11288 11289 if (!reqp) 11290 goto kmalloc_failed; 11291 11292 adv_dvc->orig_reqp = reqp; 11293 11294 /* 11295 * Allocate up to ADV_TOT_SG_BLOCK request structures for 11296 * the Wide board. Each structure is about 136 bytes. 11297 */ 11298 board->adv_sgblkp = NULL; 11299 for (sg_cnt = 0; sg_cnt < ADV_TOT_SG_BLOCK; sg_cnt++) { 11300 sgp = kmalloc(sizeof(adv_sgblk_t), GFP_KERNEL); 11301 11302 if (!sgp) 11303 break; 11304 11305 sgp->next_sgblkp = board->adv_sgblkp; 11306 board->adv_sgblkp = sgp; 11307 11308 } 11309 11310 ASC_DBG(1, "sg_cnt %d * %lu = %lu bytes\n", sg_cnt, sizeof(adv_sgblk_t), 11311 sizeof(adv_sgblk_t) * sg_cnt); 11312 11313 if (!board->adv_sgblkp) 11314 goto kmalloc_failed; 11315 11316 /* 11317 * Point 'adv_reqp' to the request structures and 11318 * link them together. 11319 */ 11320 req_cnt--; 11321 reqp[req_cnt].next_reqp = NULL; 11322 for (; req_cnt > 0; req_cnt--) { 11323 reqp[req_cnt - 1].next_reqp = &reqp[req_cnt]; 11324 } 11325 board->adv_reqp = &reqp[0]; 11326 11327 if (adv_dvc->chip_type == ADV_CHIP_ASC3550) { 11328 ASC_DBG(2, "AdvInitAsc3550Driver()\n"); 11329 warn_code = AdvInitAsc3550Driver(adv_dvc); 11330 } else if (adv_dvc->chip_type == ADV_CHIP_ASC38C0800) { 11331 ASC_DBG(2, "AdvInitAsc38C0800Driver()\n"); 11332 warn_code = AdvInitAsc38C0800Driver(adv_dvc); 11333 } else { 11334 ASC_DBG(2, "AdvInitAsc38C1600Driver()\n"); 11335 warn_code = AdvInitAsc38C1600Driver(adv_dvc); 11336 } 11337 err_code = adv_dvc->err_code; 11338 11339 if (warn_code || err_code) { 11340 shost_printk(KERN_WARNING, shost, "error: warn 0x%x, error " 11341 "0x%x\n", warn_code, err_code); 11342 } 11343 11344 goto exit; 11345 11346 kmalloc_failed: 11347 shost_printk(KERN_ERR, shost, "error: kmalloc() failed\n"); 11348 err_code = ADV_ERROR; 11349 exit: 11350 return err_code; 11351} 11352 11353static void advansys_wide_free_mem(struct asc_board *board) 11354{ 11355 struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var; 11356 kfree(adv_dvc->carrier_buf); 11357 adv_dvc->carrier_buf = NULL; 11358 kfree(adv_dvc->orig_reqp); 11359 adv_dvc->orig_reqp = board->adv_reqp = NULL; 11360 while (board->adv_sgblkp) { 11361 adv_sgblk_t *sgp = board->adv_sgblkp; 11362 board->adv_sgblkp = sgp->next_sgblkp; 11363 kfree(sgp); 11364 } 11365} 11366 11367static int advansys_board_found(struct Scsi_Host *shost, unsigned int iop, 11368 int bus_type) 11369{ 11370 struct pci_dev *pdev; 11371 struct asc_board *boardp = shost_priv(shost); 11372 ASC_DVC_VAR *asc_dvc_varp = NULL; 11373 ADV_DVC_VAR *adv_dvc_varp = NULL; 11374 int share_irq, warn_code, ret; 11375 11376 pdev = (bus_type == ASC_IS_PCI) ? to_pci_dev(boardp->dev) : NULL; 11377 11378 if (ASC_NARROW_BOARD(boardp)) { 11379 ASC_DBG(1, "narrow board\n"); 11380 asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; 11381 asc_dvc_varp->bus_type = bus_type; 11382 asc_dvc_varp->drv_ptr = boardp; 11383 asc_dvc_varp->cfg = &boardp->dvc_cfg.asc_dvc_cfg; 11384 asc_dvc_varp->iop_base = iop; 11385 } else { 11386#ifdef CONFIG_PCI 11387 adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; 11388 adv_dvc_varp->drv_ptr = boardp; 11389 adv_dvc_varp->cfg = &boardp->dvc_cfg.adv_dvc_cfg; 11390 if (pdev->device == PCI_DEVICE_ID_ASP_ABP940UW) { 11391 ASC_DBG(1, "wide board ASC-3550\n"); 11392 adv_dvc_varp->chip_type = ADV_CHIP_ASC3550; 11393 } else if (pdev->device == PCI_DEVICE_ID_38C0800_REV1) { 11394 ASC_DBG(1, "wide board ASC-38C0800\n"); 11395 adv_dvc_varp->chip_type = ADV_CHIP_ASC38C0800; 11396 } else { 11397 ASC_DBG(1, "wide board ASC-38C1600\n"); 11398 adv_dvc_varp->chip_type = ADV_CHIP_ASC38C1600; 11399 } 11400 11401 boardp->asc_n_io_port = pci_resource_len(pdev, 1); 11402 boardp->ioremap_addr = pci_ioremap_bar(pdev, 1); 11403 if (!boardp->ioremap_addr) { 11404 shost_printk(KERN_ERR, shost, "ioremap(%lx, %d) " 11405 "returned NULL\n", 11406 (long)pci_resource_start(pdev, 1), 11407 boardp->asc_n_io_port); 11408 ret = -ENODEV; 11409 goto err_shost; 11410 } 11411 adv_dvc_varp->iop_base = (AdvPortAddr)boardp->ioremap_addr; 11412 ASC_DBG(1, "iop_base: 0x%p\n", adv_dvc_varp->iop_base); 11413 11414 /* 11415 * Even though it isn't used to access wide boards, other 11416 * than for the debug line below, save I/O Port address so 11417 * that it can be reported. 11418 */ 11419 boardp->ioport = iop; 11420 11421 ASC_DBG(1, "iopb_chip_id_1 0x%x, iopw_chip_id_0 0x%x\n", 11422 (ushort)inp(iop + 1), (ushort)inpw(iop)); 11423#endif /* CONFIG_PCI */ 11424 } 11425 11426 if (ASC_NARROW_BOARD(boardp)) { 11427 /* 11428 * Set the board bus type and PCI IRQ before 11429 * calling AscInitGetConfig(). 11430 */ 11431 switch (asc_dvc_varp->bus_type) { 11432#ifdef CONFIG_ISA 11433 case ASC_IS_ISA: 11434 shost->unchecked_isa_dma = TRUE; 11435 share_irq = 0; 11436 break; 11437 case ASC_IS_VL: 11438 shost->unchecked_isa_dma = FALSE; 11439 share_irq = 0; 11440 break; 11441 case ASC_IS_EISA: 11442 shost->unchecked_isa_dma = FALSE; 11443 share_irq = IRQF_SHARED; 11444 break; 11445#endif /* CONFIG_ISA */ 11446#ifdef CONFIG_PCI 11447 case ASC_IS_PCI: 11448 shost->unchecked_isa_dma = FALSE; 11449 share_irq = IRQF_SHARED; 11450 break; 11451#endif /* CONFIG_PCI */ 11452 default: 11453 shost_printk(KERN_ERR, shost, "unknown adapter type: " 11454 "%d\n", asc_dvc_varp->bus_type); 11455 shost->unchecked_isa_dma = TRUE; 11456 share_irq = 0; 11457 break; 11458 } 11459 11460 /* 11461 * NOTE: AscInitGetConfig() may change the board's 11462 * bus_type value. The bus_type value should no 11463 * longer be used. If the bus_type field must be 11464 * referenced only use the bit-wise AND operator "&". 11465 */ 11466 ASC_DBG(2, "AscInitGetConfig()\n"); 11467 ret = AscInitGetConfig(shost) ? -ENODEV : 0; 11468 } else { 11469#ifdef CONFIG_PCI 11470 /* 11471 * For Wide boards set PCI information before calling 11472 * AdvInitGetConfig(). 11473 */ 11474 shost->unchecked_isa_dma = FALSE; 11475 share_irq = IRQF_SHARED; 11476 ASC_DBG(2, "AdvInitGetConfig()\n"); 11477 11478 ret = AdvInitGetConfig(pdev, shost) ? -ENODEV : 0; 11479#endif /* CONFIG_PCI */ 11480 } 11481 11482 if (ret) 11483 goto err_unmap; 11484 11485 /* 11486 * Save the EEPROM configuration so that it can be displayed 11487 * from /proc/scsi/advansys/[0...]. 11488 */ 11489 if (ASC_NARROW_BOARD(boardp)) { 11490 11491 ASCEEP_CONFIG *ep; 11492 11493 /* 11494 * Set the adapter's target id bit in the 'init_tidmask' field. 11495 */ 11496 boardp->init_tidmask |= 11497 ADV_TID_TO_TIDMASK(asc_dvc_varp->cfg->chip_scsi_id); 11498 11499 /* 11500 * Save EEPROM settings for the board. 11501 */ 11502 ep = &boardp->eep_config.asc_eep; 11503 11504 ep->init_sdtr = asc_dvc_varp->cfg->sdtr_enable; 11505 ep->disc_enable = asc_dvc_varp->cfg->disc_enable; 11506 ep->use_cmd_qng = asc_dvc_varp->cfg->cmd_qng_enabled; 11507 ASC_EEP_SET_DMA_SPD(ep, asc_dvc_varp->cfg->isa_dma_speed); 11508 ep->start_motor = asc_dvc_varp->start_motor; 11509 ep->cntl = asc_dvc_varp->dvc_cntl; 11510 ep->no_scam = asc_dvc_varp->no_scam; 11511 ep->max_total_qng = asc_dvc_varp->max_total_qng; 11512 ASC_EEP_SET_CHIP_ID(ep, asc_dvc_varp->cfg->chip_scsi_id); 11513 /* 'max_tag_qng' is set to the same value for every device. */ 11514 ep->max_tag_qng = asc_dvc_varp->cfg->max_tag_qng[0]; 11515 ep->adapter_info[0] = asc_dvc_varp->cfg->adapter_info[0]; 11516 ep->adapter_info[1] = asc_dvc_varp->cfg->adapter_info[1]; 11517 ep->adapter_info[2] = asc_dvc_varp->cfg->adapter_info[2]; 11518 ep->adapter_info[3] = asc_dvc_varp->cfg->adapter_info[3]; 11519 ep->adapter_info[4] = asc_dvc_varp->cfg->adapter_info[4]; 11520 ep->adapter_info[5] = asc_dvc_varp->cfg->adapter_info[5]; 11521 11522 /* 11523 * Modify board configuration. 11524 */ 11525 ASC_DBG(2, "AscInitSetConfig()\n"); 11526 ret = AscInitSetConfig(pdev, shost) ? -ENODEV : 0; 11527 if (ret) 11528 goto err_unmap; 11529 } else { 11530 ADVEEP_3550_CONFIG *ep_3550; 11531 ADVEEP_38C0800_CONFIG *ep_38C0800; 11532 ADVEEP_38C1600_CONFIG *ep_38C1600; 11533 11534 /* 11535 * Save Wide EEP Configuration Information. 11536 */ 11537 if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { 11538 ep_3550 = &boardp->eep_config.adv_3550_eep; 11539 11540 ep_3550->adapter_scsi_id = adv_dvc_varp->chip_scsi_id; 11541 ep_3550->max_host_qng = adv_dvc_varp->max_host_qng; 11542 ep_3550->max_dvc_qng = adv_dvc_varp->max_dvc_qng; 11543 ep_3550->termination = adv_dvc_varp->cfg->termination; 11544 ep_3550->disc_enable = adv_dvc_varp->cfg->disc_enable; 11545 ep_3550->bios_ctrl = adv_dvc_varp->bios_ctrl; 11546 ep_3550->wdtr_able = adv_dvc_varp->wdtr_able; 11547 ep_3550->sdtr_able = adv_dvc_varp->sdtr_able; 11548 ep_3550->ultra_able = adv_dvc_varp->ultra_able; 11549 ep_3550->tagqng_able = adv_dvc_varp->tagqng_able; 11550 ep_3550->start_motor = adv_dvc_varp->start_motor; 11551 ep_3550->scsi_reset_delay = 11552 adv_dvc_varp->scsi_reset_wait; 11553 ep_3550->serial_number_word1 = 11554 adv_dvc_varp->cfg->serial1; 11555 ep_3550->serial_number_word2 = 11556 adv_dvc_varp->cfg->serial2; 11557 ep_3550->serial_number_word3 = 11558 adv_dvc_varp->cfg->serial3; 11559 } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { 11560 ep_38C0800 = &boardp->eep_config.adv_38C0800_eep; 11561 11562 ep_38C0800->adapter_scsi_id = 11563 adv_dvc_varp->chip_scsi_id; 11564 ep_38C0800->max_host_qng = adv_dvc_varp->max_host_qng; 11565 ep_38C0800->max_dvc_qng = adv_dvc_varp->max_dvc_qng; 11566 ep_38C0800->termination_lvd = 11567 adv_dvc_varp->cfg->termination; 11568 ep_38C0800->disc_enable = 11569 adv_dvc_varp->cfg->disc_enable; 11570 ep_38C0800->bios_ctrl = adv_dvc_varp->bios_ctrl; 11571 ep_38C0800->wdtr_able = adv_dvc_varp->wdtr_able; 11572 ep_38C0800->tagqng_able = adv_dvc_varp->tagqng_able; 11573 ep_38C0800->sdtr_speed1 = adv_dvc_varp->sdtr_speed1; 11574 ep_38C0800->sdtr_speed2 = adv_dvc_varp->sdtr_speed2; 11575 ep_38C0800->sdtr_speed3 = adv_dvc_varp->sdtr_speed3; 11576 ep_38C0800->sdtr_speed4 = adv_dvc_varp->sdtr_speed4; 11577 ep_38C0800->tagqng_able = adv_dvc_varp->tagqng_able; 11578 ep_38C0800->start_motor = adv_dvc_varp->start_motor; 11579 ep_38C0800->scsi_reset_delay = 11580 adv_dvc_varp->scsi_reset_wait; 11581 ep_38C0800->serial_number_word1 = 11582 adv_dvc_varp->cfg->serial1; 11583 ep_38C0800->serial_number_word2 = 11584 adv_dvc_varp->cfg->serial2; 11585 ep_38C0800->serial_number_word3 = 11586 adv_dvc_varp->cfg->serial3; 11587 } else { 11588 ep_38C1600 = &boardp->eep_config.adv_38C1600_eep; 11589 11590 ep_38C1600->adapter_scsi_id = 11591 adv_dvc_varp->chip_scsi_id; 11592 ep_38C1600->max_host_qng = adv_dvc_varp->max_host_qng; 11593 ep_38C1600->max_dvc_qng = adv_dvc_varp->max_dvc_qng; 11594 ep_38C1600->termination_lvd = 11595 adv_dvc_varp->cfg->termination; 11596 ep_38C1600->disc_enable = 11597 adv_dvc_varp->cfg->disc_enable; 11598 ep_38C1600->bios_ctrl = adv_dvc_varp->bios_ctrl; 11599 ep_38C1600->wdtr_able = adv_dvc_varp->wdtr_able; 11600 ep_38C1600->tagqng_able = adv_dvc_varp->tagqng_able; 11601 ep_38C1600->sdtr_speed1 = adv_dvc_varp->sdtr_speed1; 11602 ep_38C1600->sdtr_speed2 = adv_dvc_varp->sdtr_speed2; 11603 ep_38C1600->sdtr_speed3 = adv_dvc_varp->sdtr_speed3; 11604 ep_38C1600->sdtr_speed4 = adv_dvc_varp->sdtr_speed4; 11605 ep_38C1600->tagqng_able = adv_dvc_varp->tagqng_able; 11606 ep_38C1600->start_motor = adv_dvc_varp->start_motor; 11607 ep_38C1600->scsi_reset_delay = 11608 adv_dvc_varp->scsi_reset_wait; 11609 ep_38C1600->serial_number_word1 = 11610 adv_dvc_varp->cfg->serial1; 11611 ep_38C1600->serial_number_word2 = 11612 adv_dvc_varp->cfg->serial2; 11613 ep_38C1600->serial_number_word3 = 11614 adv_dvc_varp->cfg->serial3; 11615 } 11616 11617 /* 11618 * Set the adapter's target id bit in the 'init_tidmask' field. 11619 */ 11620 boardp->init_tidmask |= 11621 ADV_TID_TO_TIDMASK(adv_dvc_varp->chip_scsi_id); 11622 } 11623 11624 /* 11625 * Channels are numbered beginning with 0. For AdvanSys one host 11626 * structure supports one channel. Multi-channel boards have a 11627 * separate host structure for each channel. 11628 */ 11629 shost->max_channel = 0; 11630 if (ASC_NARROW_BOARD(boardp)) { 11631 shost->max_id = ASC_MAX_TID + 1; 11632 shost->max_lun = ASC_MAX_LUN + 1; 11633 shost->max_cmd_len = ASC_MAX_CDB_LEN; 11634 11635 shost->io_port = asc_dvc_varp->iop_base; 11636 boardp->asc_n_io_port = ASC_IOADR_GAP; 11637 shost->this_id = asc_dvc_varp->cfg->chip_scsi_id; 11638 11639 /* Set maximum number of queues the adapter can handle. */ 11640 shost->can_queue = asc_dvc_varp->max_total_qng; 11641 } else { 11642 shost->max_id = ADV_MAX_TID + 1; 11643 shost->max_lun = ADV_MAX_LUN + 1; 11644 shost->max_cmd_len = ADV_MAX_CDB_LEN; 11645 11646 /* 11647 * Save the I/O Port address and length even though 11648 * I/O ports are not used to access Wide boards. 11649 * Instead the Wide boards are accessed with 11650 * PCI Memory Mapped I/O. 11651 */ 11652 shost->io_port = iop; 11653 11654 shost->this_id = adv_dvc_varp->chip_scsi_id; 11655 11656 /* Set maximum number of queues the adapter can handle. */ 11657 shost->can_queue = adv_dvc_varp->max_host_qng; 11658 } 11659 11660 /* 11661 * Following v1.3.89, 'cmd_per_lun' is no longer needed 11662 * and should be set to zero. 11663 * 11664 * But because of a bug introduced in v1.3.89 if the driver is 11665 * compiled as a module and 'cmd_per_lun' is zero, the Mid-Level 11666 * SCSI function 'allocate_device' will panic. To allow the driver 11667 * to work as a module in these kernels set 'cmd_per_lun' to 1. 11668 * 11669 * Note: This is wrong. cmd_per_lun should be set to the depth 11670 * you want on untagged devices always. 11671 #ifdef MODULE 11672 */ 11673 shost->cmd_per_lun = 1; 11674/* #else 11675 shost->cmd_per_lun = 0; 11676#endif */ 11677 11678 /* 11679 * Set the maximum number of scatter-gather elements the 11680 * adapter can handle. 11681 */ 11682 if (ASC_NARROW_BOARD(boardp)) { 11683 /* 11684 * Allow two commands with 'sg_tablesize' scatter-gather 11685 * elements to be executed simultaneously. This value is 11686 * the theoretical hardware limit. It may be decreased 11687 * below. 11688 */ 11689 shost->sg_tablesize = 11690 (((asc_dvc_varp->max_total_qng - 2) / 2) * 11691 ASC_SG_LIST_PER_Q) + 1; 11692 } else { 11693 shost->sg_tablesize = ADV_MAX_SG_LIST; 11694 } 11695 11696 /* 11697 * The value of 'sg_tablesize' can not exceed the SCSI 11698 * mid-level driver definition of SG_ALL. SG_ALL also 11699 * must not be exceeded, because it is used to define the 11700 * size of the scatter-gather table in 'struct asc_sg_head'. 11701 */ 11702 if (shost->sg_tablesize > SG_ALL) { 11703 shost->sg_tablesize = SG_ALL; 11704 } 11705 11706 ASC_DBG(1, "sg_tablesize: %d\n", shost->sg_tablesize); 11707 11708 /* BIOS start address. */ 11709 if (ASC_NARROW_BOARD(boardp)) { 11710 shost->base = AscGetChipBiosAddress(asc_dvc_varp->iop_base, 11711 asc_dvc_varp->bus_type); 11712 } else { 11713 /* 11714 * Fill-in BIOS board variables. The Wide BIOS saves 11715 * information in LRAM that is used by the driver. 11716 */ 11717 AdvReadWordLram(adv_dvc_varp->iop_base, 11718 BIOS_SIGNATURE, boardp->bios_signature); 11719 AdvReadWordLram(adv_dvc_varp->iop_base, 11720 BIOS_VERSION, boardp->bios_version); 11721 AdvReadWordLram(adv_dvc_varp->iop_base, 11722 BIOS_CODESEG, boardp->bios_codeseg); 11723 AdvReadWordLram(adv_dvc_varp->iop_base, 11724 BIOS_CODELEN, boardp->bios_codelen); 11725 11726 ASC_DBG(1, "bios_signature 0x%x, bios_version 0x%x\n", 11727 boardp->bios_signature, boardp->bios_version); 11728 11729 ASC_DBG(1, "bios_codeseg 0x%x, bios_codelen 0x%x\n", 11730 boardp->bios_codeseg, boardp->bios_codelen); 11731 11732 /* 11733 * If the BIOS saved a valid signature, then fill in 11734 * the BIOS code segment base address. 11735 */ 11736 if (boardp->bios_signature == 0x55AA) { 11737 /* 11738 * Convert x86 realmode code segment to a linear 11739 * address by shifting left 4. 11740 */ 11741 shost->base = ((ulong)boardp->bios_codeseg << 4); 11742 } else { 11743 shost->base = 0; 11744 } 11745 } 11746 11747 /* 11748 * Register Board Resources - I/O Port, DMA, IRQ 11749 */ 11750 11751 /* Register DMA Channel for Narrow boards. */ 11752 shost->dma_channel = NO_ISA_DMA; /* Default to no ISA DMA. */ 11753#ifdef CONFIG_ISA 11754 if (ASC_NARROW_BOARD(boardp)) { 11755 /* Register DMA channel for ISA bus. */ 11756 if (asc_dvc_varp->bus_type & ASC_IS_ISA) { 11757 shost->dma_channel = asc_dvc_varp->cfg->isa_dma_channel; 11758 ret = request_dma(shost->dma_channel, DRV_NAME); 11759 if (ret) { 11760 shost_printk(KERN_ERR, shost, "request_dma() " 11761 "%d failed %d\n", 11762 shost->dma_channel, ret); 11763 goto err_unmap; 11764 } 11765 AscEnableIsaDma(shost->dma_channel); 11766 } 11767 } 11768#endif /* CONFIG_ISA */ 11769 11770 /* Register IRQ Number. */ 11771 ASC_DBG(2, "request_irq(%d, %p)\n", boardp->irq, shost); 11772 11773 ret = request_irq(boardp->irq, advansys_interrupt, share_irq, 11774 DRV_NAME, shost); 11775 11776 if (ret) { 11777 if (ret == -EBUSY) { 11778 shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x " 11779 "already in use\n", boardp->irq); 11780 } else if (ret == -EINVAL) { 11781 shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x " 11782 "not valid\n", boardp->irq); 11783 } else { 11784 shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x " 11785 "failed with %d\n", boardp->irq, ret); 11786 } 11787 goto err_free_dma; 11788 } 11789 11790 /* 11791 * Initialize board RISC chip and enable interrupts. 11792 */ 11793 if (ASC_NARROW_BOARD(boardp)) { 11794 ASC_DBG(2, "AscInitAsc1000Driver()\n"); 11795 11796 asc_dvc_varp->overrun_buf = kzalloc(ASC_OVERRUN_BSIZE, GFP_KERNEL); 11797 if (!asc_dvc_varp->overrun_buf) { 11798 ret = -ENOMEM; 11799 goto err_free_irq; 11800 } 11801 warn_code = AscInitAsc1000Driver(asc_dvc_varp); 11802 11803 if (warn_code || asc_dvc_varp->err_code) { 11804 shost_printk(KERN_ERR, shost, "error: init_state 0x%x, " 11805 "warn 0x%x, error 0x%x\n", 11806 asc_dvc_varp->init_state, warn_code, 11807 asc_dvc_varp->err_code); 11808 if (!asc_dvc_varp->overrun_dma) { 11809 ret = -ENODEV; 11810 goto err_free_mem; 11811 } 11812 } 11813 } else { 11814 if (advansys_wide_init_chip(shost)) { 11815 ret = -ENODEV; 11816 goto err_free_mem; 11817 } 11818 } 11819 11820 ASC_DBG_PRT_SCSI_HOST(2, shost); 11821 11822 ret = scsi_add_host(shost, boardp->dev); 11823 if (ret) 11824 goto err_free_mem; 11825 11826 scsi_scan_host(shost); 11827 return 0; 11828 11829 err_free_mem: 11830 if (ASC_NARROW_BOARD(boardp)) { 11831 if (asc_dvc_varp->overrun_dma) 11832 dma_unmap_single(boardp->dev, asc_dvc_varp->overrun_dma, 11833 ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); 11834 kfree(asc_dvc_varp->overrun_buf); 11835 } else 11836 advansys_wide_free_mem(boardp); 11837 err_free_irq: 11838 free_irq(boardp->irq, shost); 11839 err_free_dma: 11840#ifdef CONFIG_ISA 11841 if (shost->dma_channel != NO_ISA_DMA) 11842 free_dma(shost->dma_channel); 11843#endif 11844 err_unmap: 11845 if (boardp->ioremap_addr) 11846 iounmap(boardp->ioremap_addr); 11847 err_shost: 11848 return ret; 11849} 11850 11851/* 11852 * advansys_release() 11853 * 11854 * Release resources allocated for a single AdvanSys adapter. 11855 */ 11856static int advansys_release(struct Scsi_Host *shost) 11857{ 11858 struct asc_board *board = shost_priv(shost); 11859 ASC_DBG(1, "begin\n"); 11860 scsi_remove_host(shost); 11861 free_irq(board->irq, shost); 11862#ifdef CONFIG_ISA 11863 if (shost->dma_channel != NO_ISA_DMA) { 11864 ASC_DBG(1, "free_dma()\n"); 11865 free_dma(shost->dma_channel); 11866 } 11867#endif 11868 if (ASC_NARROW_BOARD(board)) { 11869 dma_unmap_single(board->dev, 11870 board->dvc_var.asc_dvc_var.overrun_dma, 11871 ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); 11872 kfree(board->dvc_var.asc_dvc_var.overrun_buf); 11873 } else { 11874 iounmap(board->ioremap_addr); 11875 advansys_wide_free_mem(board); 11876 } 11877 scsi_host_put(shost); 11878 ASC_DBG(1, "end\n"); 11879 return 0; 11880} 11881 11882#define ASC_IOADR_TABLE_MAX_IX 11 11883 11884static PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] = { 11885 0x100, 0x0110, 0x120, 0x0130, 0x140, 0x0150, 0x0190, 11886 0x0210, 0x0230, 0x0250, 0x0330 11887}; 11888 11889/* 11890 * The ISA IRQ number is found in bits 2 and 3 of the CfgLsw. It decodes as: 11891 * 00: 10 11892 * 01: 11 11893 * 10: 12 11894 * 11: 15 11895 */ 11896static unsigned int advansys_isa_irq_no(PortAddr iop_base) 11897{ 11898 unsigned short cfg_lsw = AscGetChipCfgLsw(iop_base); 11899 unsigned int chip_irq = ((cfg_lsw >> 2) & 0x03) + 10; 11900 if (chip_irq == 13) 11901 chip_irq = 15; 11902 return chip_irq; 11903} 11904 11905static int advansys_isa_probe(struct device *dev, unsigned int id) 11906{ 11907 int err = -ENODEV; 11908 PortAddr iop_base = _asc_def_iop_base[id]; 11909 struct Scsi_Host *shost; 11910 struct asc_board *board; 11911 11912 if (!request_region(iop_base, ASC_IOADR_GAP, DRV_NAME)) { 11913 ASC_DBG(1, "I/O port 0x%x busy\n", iop_base); 11914 return -ENODEV; 11915 } 11916 ASC_DBG(1, "probing I/O port 0x%x\n", iop_base); 11917 if (!AscFindSignature(iop_base)) 11918 goto release_region; 11919 if (!(AscGetChipVersion(iop_base, ASC_IS_ISA) & ASC_CHIP_VER_ISA_BIT)) 11920 goto release_region; 11921 11922 err = -ENOMEM; 11923 shost = scsi_host_alloc(&advansys_template, sizeof(*board)); 11924 if (!shost) 11925 goto release_region; 11926 11927 board = shost_priv(shost); 11928 board->irq = advansys_isa_irq_no(iop_base); 11929 board->dev = dev; 11930 11931 err = advansys_board_found(shost, iop_base, ASC_IS_ISA); 11932 if (err) 11933 goto free_host; 11934 11935 dev_set_drvdata(dev, shost); 11936 return 0; 11937 11938 free_host: 11939 scsi_host_put(shost); 11940 release_region: 11941 release_region(iop_base, ASC_IOADR_GAP); 11942 return err; 11943} 11944 11945static int advansys_isa_remove(struct device *dev, unsigned int id) 11946{ 11947 int ioport = _asc_def_iop_base[id]; 11948 advansys_release(dev_get_drvdata(dev)); 11949 release_region(ioport, ASC_IOADR_GAP); 11950 return 0; 11951} 11952 11953static struct isa_driver advansys_isa_driver = { 11954 .probe = advansys_isa_probe, 11955 .remove = advansys_isa_remove, 11956 .driver = { 11957 .owner = THIS_MODULE, 11958 .name = DRV_NAME, 11959 }, 11960}; 11961 11962/* 11963 * The VLB IRQ number is found in bits 2 to 4 of the CfgLsw. It decodes as: 11964 * 000: invalid 11965 * 001: 10 11966 * 010: 11 11967 * 011: 12 11968 * 100: invalid 11969 * 101: 14 11970 * 110: 15 11971 * 111: invalid 11972 */ 11973static unsigned int advansys_vlb_irq_no(PortAddr iop_base) 11974{ 11975 unsigned short cfg_lsw = AscGetChipCfgLsw(iop_base); 11976 unsigned int chip_irq = ((cfg_lsw >> 2) & 0x07) + 9; 11977 if ((chip_irq < 10) || (chip_irq == 13) || (chip_irq > 15)) 11978 return 0; 11979 return chip_irq; 11980} 11981 11982static int advansys_vlb_probe(struct device *dev, unsigned int id) 11983{ 11984 int err = -ENODEV; 11985 PortAddr iop_base = _asc_def_iop_base[id]; 11986 struct Scsi_Host *shost; 11987 struct asc_board *board; 11988 11989 if (!request_region(iop_base, ASC_IOADR_GAP, DRV_NAME)) { 11990 ASC_DBG(1, "I/O port 0x%x busy\n", iop_base); 11991 return -ENODEV; 11992 } 11993 ASC_DBG(1, "probing I/O port 0x%x\n", iop_base); 11994 if (!AscFindSignature(iop_base)) 11995 goto release_region; 11996 /* 11997 * I don't think this condition can actually happen, but the old 11998 * driver did it, and the chances of finding a VLB setup in 2007 11999 * to do testing with is slight to none. 12000 */ 12001 if (AscGetChipVersion(iop_base, ASC_IS_VL) > ASC_CHIP_MAX_VER_VL) 12002 goto release_region; 12003 12004 err = -ENOMEM; 12005 shost = scsi_host_alloc(&advansys_template, sizeof(*board)); 12006 if (!shost) 12007 goto release_region; 12008 12009 board = shost_priv(shost); 12010 board->irq = advansys_vlb_irq_no(iop_base); 12011 board->dev = dev; 12012 12013 err = advansys_board_found(shost, iop_base, ASC_IS_VL); 12014 if (err) 12015 goto free_host; 12016 12017 dev_set_drvdata(dev, shost); 12018 return 0; 12019 12020 free_host: 12021 scsi_host_put(shost); 12022 release_region: 12023 release_region(iop_base, ASC_IOADR_GAP); 12024 return -ENODEV; 12025} 12026 12027static struct isa_driver advansys_vlb_driver = { 12028 .probe = advansys_vlb_probe, 12029 .remove = advansys_isa_remove, 12030 .driver = { 12031 .owner = THIS_MODULE, 12032 .name = "advansys_vlb", 12033 }, 12034}; 12035 12036static struct eisa_device_id advansys_eisa_table[] = { 12037 { "ABP7401" }, 12038 { "ABP7501" }, 12039 { "" } 12040}; 12041 12042MODULE_DEVICE_TABLE(eisa, advansys_eisa_table); 12043 12044/* 12045 * EISA is a little more tricky than PCI; each EISA device may have two 12046 * channels, and this driver is written to make each channel its own Scsi_Host 12047 */ 12048struct eisa_scsi_data { 12049 struct Scsi_Host *host[2]; 12050}; 12051 12052/* 12053 * The EISA IRQ number is found in bits 8 to 10 of the CfgLsw. It decodes as: 12054 * 000: 10 12055 * 001: 11 12056 * 010: 12 12057 * 011: invalid 12058 * 100: 14 12059 * 101: 15 12060 * 110: invalid 12061 * 111: invalid 12062 */ 12063static unsigned int advansys_eisa_irq_no(struct eisa_device *edev) 12064{ 12065 unsigned short cfg_lsw = inw(edev->base_addr + 0xc86); 12066 unsigned int chip_irq = ((cfg_lsw >> 8) & 0x07) + 10; 12067 if ((chip_irq == 13) || (chip_irq > 15)) 12068 return 0; 12069 return chip_irq; 12070} 12071 12072static int advansys_eisa_probe(struct device *dev) 12073{ 12074 int i, ioport, irq = 0; 12075 int err; 12076 struct eisa_device *edev = to_eisa_device(dev); 12077 struct eisa_scsi_data *data; 12078 12079 err = -ENOMEM; 12080 data = kzalloc(sizeof(*data), GFP_KERNEL); 12081 if (!data) 12082 goto fail; 12083 ioport = edev->base_addr + 0xc30; 12084 12085 err = -ENODEV; 12086 for (i = 0; i < 2; i++, ioport += 0x20) { 12087 struct asc_board *board; 12088 struct Scsi_Host *shost; 12089 if (!request_region(ioport, ASC_IOADR_GAP, DRV_NAME)) { 12090 printk(KERN_WARNING "Region %x-%x busy\n", ioport, 12091 ioport + ASC_IOADR_GAP - 1); 12092 continue; 12093 } 12094 if (!AscFindSignature(ioport)) { 12095 release_region(ioport, ASC_IOADR_GAP); 12096 continue; 12097 } 12098 12099 /* 12100 * I don't know why we need to do this for EISA chips, but 12101 * not for any others. It looks to be equivalent to 12102 * AscGetChipCfgMsw, but I may have overlooked something, 12103 * so I'm not converting it until I get an EISA board to 12104 * test with. 12105 */ 12106 inw(ioport + 4); 12107 12108 if (!irq) 12109 irq = advansys_eisa_irq_no(edev); 12110 12111 err = -ENOMEM; 12112 shost = scsi_host_alloc(&advansys_template, sizeof(*board)); 12113 if (!shost) 12114 goto release_region; 12115 12116 board = shost_priv(shost); 12117 board->irq = irq; 12118 board->dev = dev; 12119 12120 err = advansys_board_found(shost, ioport, ASC_IS_EISA); 12121 if (!err) { 12122 data->host[i] = shost; 12123 continue; 12124 } 12125 12126 scsi_host_put(shost); 12127 release_region: 12128 release_region(ioport, ASC_IOADR_GAP); 12129 break; 12130 } 12131 12132 if (err) 12133 goto free_data; 12134 dev_set_drvdata(dev, data); 12135 return 0; 12136 12137 free_data: 12138 kfree(data->host[0]); 12139 kfree(data->host[1]); 12140 kfree(data); 12141 fail: 12142 return err; 12143} 12144 12145static int advansys_eisa_remove(struct device *dev) 12146{ 12147 int i; 12148 struct eisa_scsi_data *data = dev_get_drvdata(dev); 12149 12150 for (i = 0; i < 2; i++) { 12151 int ioport; 12152 struct Scsi_Host *shost = data->host[i]; 12153 if (!shost) 12154 continue; 12155 ioport = shost->io_port; 12156 advansys_release(shost); 12157 release_region(ioport, ASC_IOADR_GAP); 12158 } 12159 12160 kfree(data); 12161 return 0; 12162} 12163 12164static struct eisa_driver advansys_eisa_driver = { 12165 .id_table = advansys_eisa_table, 12166 .driver = { 12167 .name = DRV_NAME, 12168 .probe = advansys_eisa_probe, 12169 .remove = advansys_eisa_remove, 12170 } 12171}; 12172 12173/* PCI Devices supported by this driver */ 12174static struct pci_device_id advansys_pci_tbl[] = { 12175 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_1200A, 12176 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 12177 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940, 12178 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 12179 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940U, 12180 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 12181 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940UW, 12182 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 12183 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C0800_REV1, 12184 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 12185 {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C1600_REV1, 12186 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 12187 {} 12188}; 12189 12190MODULE_DEVICE_TABLE(pci, advansys_pci_tbl); 12191 12192static void advansys_set_latency(struct pci_dev *pdev) 12193{ 12194 if ((pdev->device == PCI_DEVICE_ID_ASP_1200A) || 12195 (pdev->device == PCI_DEVICE_ID_ASP_ABP940)) { 12196 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0); 12197 } else { 12198 u8 latency; 12199 pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency); 12200 if (latency < 0x20) 12201 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x20); 12202 } 12203} 12204 12205static int advansys_pci_probe(struct pci_dev *pdev, 12206 const struct pci_device_id *ent) 12207{ 12208 int err, ioport; 12209 struct Scsi_Host *shost; 12210 struct asc_board *board; 12211 12212 err = pci_enable_device(pdev); 12213 if (err) 12214 goto fail; 12215 err = pci_request_regions(pdev, DRV_NAME); 12216 if (err) 12217 goto disable_device; 12218 pci_set_master(pdev); 12219 advansys_set_latency(pdev); 12220 12221 err = -ENODEV; 12222 if (pci_resource_len(pdev, 0) == 0) 12223 goto release_region; 12224 12225 ioport = pci_resource_start(pdev, 0); 12226 12227 err = -ENOMEM; 12228 shost = scsi_host_alloc(&advansys_template, sizeof(*board)); 12229 if (!shost) 12230 goto release_region; 12231 12232 board = shost_priv(shost); 12233 board->irq = pdev->irq; 12234 board->dev = &pdev->dev; 12235 12236 if (pdev->device == PCI_DEVICE_ID_ASP_ABP940UW || 12237 pdev->device == PCI_DEVICE_ID_38C0800_REV1 || 12238 pdev->device == PCI_DEVICE_ID_38C1600_REV1) { 12239 board->flags |= ASC_IS_WIDE_BOARD; 12240 } 12241 12242 err = advansys_board_found(shost, ioport, ASC_IS_PCI); 12243 if (err) 12244 goto free_host; 12245 12246 pci_set_drvdata(pdev, shost); 12247 return 0; 12248 12249 free_host: 12250 scsi_host_put(shost); 12251 release_region: 12252 pci_release_regions(pdev); 12253 disable_device: 12254 pci_disable_device(pdev); 12255 fail: 12256 return err; 12257} 12258 12259static void advansys_pci_remove(struct pci_dev *pdev) 12260{ 12261 advansys_release(pci_get_drvdata(pdev)); 12262 pci_release_regions(pdev); 12263 pci_disable_device(pdev); 12264} 12265 12266static struct pci_driver advansys_pci_driver = { 12267 .name = DRV_NAME, 12268 .id_table = advansys_pci_tbl, 12269 .probe = advansys_pci_probe, 12270 .remove = advansys_pci_remove, 12271}; 12272 12273static int __init advansys_init(void) 12274{ 12275 int error; 12276 12277 error = isa_register_driver(&advansys_isa_driver, 12278 ASC_IOADR_TABLE_MAX_IX); 12279 if (error) 12280 goto fail; 12281 12282 error = isa_register_driver(&advansys_vlb_driver, 12283 ASC_IOADR_TABLE_MAX_IX); 12284 if (error) 12285 goto unregister_isa; 12286 12287 error = eisa_driver_register(&advansys_eisa_driver); 12288 if (error) 12289 goto unregister_vlb; 12290 12291 error = pci_register_driver(&advansys_pci_driver); 12292 if (error) 12293 goto unregister_eisa; 12294 12295 return 0; 12296 12297 unregister_eisa: 12298 eisa_driver_unregister(&advansys_eisa_driver); 12299 unregister_vlb: 12300 isa_unregister_driver(&advansys_vlb_driver); 12301 unregister_isa: 12302 isa_unregister_driver(&advansys_isa_driver); 12303 fail: 12304 return error; 12305} 12306 12307static void __exit advansys_exit(void) 12308{ 12309 pci_unregister_driver(&advansys_pci_driver); 12310 eisa_driver_unregister(&advansys_eisa_driver); 12311 isa_unregister_driver(&advansys_vlb_driver); 12312 isa_unregister_driver(&advansys_isa_driver); 12313} 12314 12315module_init(advansys_init); 12316module_exit(advansys_exit); 12317 12318MODULE_LICENSE("GPL"); 12319MODULE_FIRMWARE("advansys/mcode.bin"); 12320MODULE_FIRMWARE("advansys/3550.bin"); 12321MODULE_FIRMWARE("advansys/38C0800.bin"); 12322MODULE_FIRMWARE("advansys/38C1600.bin"); 12323