1/* 2 * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips. 3 * 4 * Copyright (C) 2005 James Chapman (ds1337 core) 5 * Copyright (C) 2006 David Brownell 6 * Copyright (C) 2009 Matthias Fuchs (rx8025 support) 7 * Copyright (C) 2012 Bertrand Achard (nvram access fixes) 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 */ 13 14#include <linux/module.h> 15#include <linux/init.h> 16#include <linux/slab.h> 17#include <linux/i2c.h> 18#include <linux/string.h> 19#include <linux/rtc.h> 20#include <linux/bcd.h> 21#include <linux/rtc/ds1307.h> 22 23/* 24 * We can't determine type by probing, but if we expect pre-Linux code 25 * to have set the chip up as a clock (turning on the oscillator and 26 * setting the date and time), Linux can ignore the non-clock features. 27 * That's a natural job for a factory or repair bench. 28 */ 29enum ds_type { 30 ds_1307, 31 ds_1337, 32 ds_1338, 33 ds_1339, 34 ds_1340, 35 ds_1388, 36 ds_3231, 37 m41t00, 38 mcp794xx, 39 rx_8025, 40 last_ds_type /* always last */ 41 /* rs5c372 too? different address... */ 42}; 43 44 45/* RTC registers don't differ much, except for the century flag */ 46#define DS1307_REG_SECS 0x00 /* 00-59 */ 47# define DS1307_BIT_CH 0x80 48# define DS1340_BIT_nEOSC 0x80 49# define MCP794XX_BIT_ST 0x80 50#define DS1307_REG_MIN 0x01 /* 00-59 */ 51#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */ 52# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */ 53# define DS1307_BIT_PM 0x20 /* in REG_HOUR */ 54# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */ 55# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */ 56#define DS1307_REG_WDAY 0x03 /* 01-07 */ 57# define MCP794XX_BIT_VBATEN 0x08 58#define DS1307_REG_MDAY 0x04 /* 01-31 */ 59#define DS1307_REG_MONTH 0x05 /* 01-12 */ 60# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */ 61#define DS1307_REG_YEAR 0x06 /* 00-99 */ 62 63/* 64 * Other registers (control, status, alarms, trickle charge, NVRAM, etc) 65 * start at 7, and they differ a LOT. Only control and status matter for 66 * basic RTC date and time functionality; be careful using them. 67 */ 68#define DS1307_REG_CONTROL 0x07 /* or ds1338 */ 69# define DS1307_BIT_OUT 0x80 70# define DS1338_BIT_OSF 0x20 71# define DS1307_BIT_SQWE 0x10 72# define DS1307_BIT_RS1 0x02 73# define DS1307_BIT_RS0 0x01 74#define DS1337_REG_CONTROL 0x0e 75# define DS1337_BIT_nEOSC 0x80 76# define DS1339_BIT_BBSQI 0x20 77# define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */ 78# define DS1337_BIT_RS2 0x10 79# define DS1337_BIT_RS1 0x08 80# define DS1337_BIT_INTCN 0x04 81# define DS1337_BIT_A2IE 0x02 82# define DS1337_BIT_A1IE 0x01 83#define DS1340_REG_CONTROL 0x07 84# define DS1340_BIT_OUT 0x80 85# define DS1340_BIT_FT 0x40 86# define DS1340_BIT_CALIB_SIGN 0x20 87# define DS1340_M_CALIBRATION 0x1f 88#define DS1340_REG_FLAG 0x09 89# define DS1340_BIT_OSF 0x80 90#define DS1337_REG_STATUS 0x0f 91# define DS1337_BIT_OSF 0x80 92# define DS1337_BIT_A2I 0x02 93# define DS1337_BIT_A1I 0x01 94#define DS1339_REG_ALARM1_SECS 0x07 95 96#define DS13XX_TRICKLE_CHARGER_MAGIC 0xa0 97 98#define RX8025_REG_CTRL1 0x0e 99# define RX8025_BIT_2412 0x20 100#define RX8025_REG_CTRL2 0x0f 101# define RX8025_BIT_PON 0x10 102# define RX8025_BIT_VDET 0x40 103# define RX8025_BIT_XST 0x20 104 105 106struct ds1307 { 107 u8 offset; /* register's offset */ 108 u8 regs[11]; 109 u16 nvram_offset; 110 struct bin_attribute *nvram; 111 enum ds_type type; 112 unsigned long flags; 113#define HAS_NVRAM 0 /* bit 0 == sysfs file active */ 114#define HAS_ALARM 1 /* bit 1 == irq claimed */ 115 struct i2c_client *client; 116 struct rtc_device *rtc; 117 struct work_struct work; 118 s32 (*read_block_data)(const struct i2c_client *client, u8 command, 119 u8 length, u8 *values); 120 s32 (*write_block_data)(const struct i2c_client *client, u8 command, 121 u8 length, const u8 *values); 122}; 123 124struct chip_desc { 125 unsigned alarm:1; 126 u16 nvram_offset; 127 u16 nvram_size; 128 u16 trickle_charger_reg; 129 u8 trickle_charger_setup; 130 u8 (*do_trickle_setup)(struct i2c_client *, uint32_t, bool); 131}; 132 133static u8 do_trickle_setup_ds1339(struct i2c_client *, 134 uint32_t ohms, bool diode); 135 136static struct chip_desc chips[last_ds_type] = { 137 [ds_1307] = { 138 .nvram_offset = 8, 139 .nvram_size = 56, 140 }, 141 [ds_1337] = { 142 .alarm = 1, 143 }, 144 [ds_1338] = { 145 .nvram_offset = 8, 146 .nvram_size = 56, 147 }, 148 [ds_1339] = { 149 .alarm = 1, 150 .trickle_charger_reg = 0x10, 151 .do_trickle_setup = &do_trickle_setup_ds1339, 152 }, 153 [ds_1340] = { 154 .trickle_charger_reg = 0x08, 155 }, 156 [ds_1388] = { 157 .trickle_charger_reg = 0x0a, 158 }, 159 [ds_3231] = { 160 .alarm = 1, 161 }, 162 [mcp794xx] = { 163 .alarm = 1, 164 /* this is battery backed SRAM */ 165 .nvram_offset = 0x20, 166 .nvram_size = 0x40, 167 }, 168}; 169 170static const struct i2c_device_id ds1307_id[] = { 171 { "ds1307", ds_1307 }, 172 { "ds1337", ds_1337 }, 173 { "ds1338", ds_1338 }, 174 { "ds1339", ds_1339 }, 175 { "ds1388", ds_1388 }, 176 { "ds1340", ds_1340 }, 177 { "ds3231", ds_3231 }, 178 { "m41t00", m41t00 }, 179 { "mcp7940x", mcp794xx }, 180 { "mcp7941x", mcp794xx }, 181 { "pt7c4338", ds_1307 }, 182 { "rx8025", rx_8025 }, 183 { } 184}; 185MODULE_DEVICE_TABLE(i2c, ds1307_id); 186 187/*----------------------------------------------------------------------*/ 188 189#define BLOCK_DATA_MAX_TRIES 10 190 191static s32 ds1307_read_block_data_once(const struct i2c_client *client, 192 u8 command, u8 length, u8 *values) 193{ 194 s32 i, data; 195 196 for (i = 0; i < length; i++) { 197 data = i2c_smbus_read_byte_data(client, command + i); 198 if (data < 0) 199 return data; 200 values[i] = data; 201 } 202 return i; 203} 204 205static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command, 206 u8 length, u8 *values) 207{ 208 u8 oldvalues[255]; 209 s32 ret; 210 int tries = 0; 211 212 dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length); 213 ret = ds1307_read_block_data_once(client, command, length, values); 214 if (ret < 0) 215 return ret; 216 do { 217 if (++tries > BLOCK_DATA_MAX_TRIES) { 218 dev_err(&client->dev, 219 "ds1307_read_block_data failed\n"); 220 return -EIO; 221 } 222 memcpy(oldvalues, values, length); 223 ret = ds1307_read_block_data_once(client, command, length, 224 values); 225 if (ret < 0) 226 return ret; 227 } while (memcmp(oldvalues, values, length)); 228 return length; 229} 230 231static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command, 232 u8 length, const u8 *values) 233{ 234 u8 currvalues[255]; 235 int tries = 0; 236 237 dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length); 238 do { 239 s32 i, ret; 240 241 if (++tries > BLOCK_DATA_MAX_TRIES) { 242 dev_err(&client->dev, 243 "ds1307_write_block_data failed\n"); 244 return -EIO; 245 } 246 for (i = 0; i < length; i++) { 247 ret = i2c_smbus_write_byte_data(client, command + i, 248 values[i]); 249 if (ret < 0) 250 return ret; 251 } 252 ret = ds1307_read_block_data_once(client, command, length, 253 currvalues); 254 if (ret < 0) 255 return ret; 256 } while (memcmp(currvalues, values, length)); 257 return length; 258} 259 260/*----------------------------------------------------------------------*/ 261 262/* These RTC devices are not designed to be connected to a SMbus adapter. 263 SMbus limits block operations length to 32 bytes, whereas it's not 264 limited on I2C buses. As a result, accesses may exceed 32 bytes; 265 in that case, split them into smaller blocks */ 266 267static s32 ds1307_native_smbus_write_block_data(const struct i2c_client *client, 268 u8 command, u8 length, const u8 *values) 269{ 270 u8 suboffset = 0; 271 272 if (length <= I2C_SMBUS_BLOCK_MAX) 273 return i2c_smbus_write_i2c_block_data(client, 274 command, length, values); 275 276 while (suboffset < length) { 277 s32 retval = i2c_smbus_write_i2c_block_data(client, 278 command + suboffset, 279 min(I2C_SMBUS_BLOCK_MAX, length - suboffset), 280 values + suboffset); 281 if (retval < 0) 282 return retval; 283 284 suboffset += I2C_SMBUS_BLOCK_MAX; 285 } 286 return length; 287} 288 289static s32 ds1307_native_smbus_read_block_data(const struct i2c_client *client, 290 u8 command, u8 length, u8 *values) 291{ 292 u8 suboffset = 0; 293 294 if (length <= I2C_SMBUS_BLOCK_MAX) 295 return i2c_smbus_read_i2c_block_data(client, 296 command, length, values); 297 298 while (suboffset < length) { 299 s32 retval = i2c_smbus_read_i2c_block_data(client, 300 command + suboffset, 301 min(I2C_SMBUS_BLOCK_MAX, length - suboffset), 302 values + suboffset); 303 if (retval < 0) 304 return retval; 305 306 suboffset += I2C_SMBUS_BLOCK_MAX; 307 } 308 return length; 309} 310 311/*----------------------------------------------------------------------*/ 312 313/* 314 * The IRQ logic includes a "real" handler running in IRQ context just 315 * long enough to schedule this workqueue entry. We need a task context 316 * to talk to the RTC, since I2C I/O calls require that; and disable the 317 * IRQ until we clear its status on the chip, so that this handler can 318 * work with any type of triggering (not just falling edge). 319 * 320 * The ds1337 and ds1339 both have two alarms, but we only use the first 321 * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm 322 * signal; ds1339 chips have only one alarm signal. 323 */ 324static void ds1307_work(struct work_struct *work) 325{ 326 struct ds1307 *ds1307; 327 struct i2c_client *client; 328 struct mutex *lock; 329 int stat, control; 330 331 ds1307 = container_of(work, struct ds1307, work); 332 client = ds1307->client; 333 lock = &ds1307->rtc->ops_lock; 334 335 mutex_lock(lock); 336 stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS); 337 if (stat < 0) 338 goto out; 339 340 if (stat & DS1337_BIT_A1I) { 341 stat &= ~DS1337_BIT_A1I; 342 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat); 343 344 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL); 345 if (control < 0) 346 goto out; 347 348 control &= ~DS1337_BIT_A1IE; 349 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control); 350 351 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF); 352 } 353 354out: 355 if (test_bit(HAS_ALARM, &ds1307->flags)) 356 enable_irq(client->irq); 357 mutex_unlock(lock); 358} 359 360static irqreturn_t ds1307_irq(int irq, void *dev_id) 361{ 362 struct i2c_client *client = dev_id; 363 struct ds1307 *ds1307 = i2c_get_clientdata(client); 364 365 disable_irq_nosync(irq); 366 schedule_work(&ds1307->work); 367 return IRQ_HANDLED; 368} 369 370/*----------------------------------------------------------------------*/ 371 372static int ds1307_get_time(struct device *dev, struct rtc_time *t) 373{ 374 struct ds1307 *ds1307 = dev_get_drvdata(dev); 375 int tmp; 376 377 /* read the RTC date and time registers all at once */ 378 tmp = ds1307->read_block_data(ds1307->client, 379 ds1307->offset, 7, ds1307->regs); 380 if (tmp != 7) { 381 dev_err(dev, "%s error %d\n", "read", tmp); 382 return -EIO; 383 } 384 385 dev_dbg(dev, "%s: %7ph\n", "read", ds1307->regs); 386 387 t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f); 388 t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f); 389 tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f; 390 t->tm_hour = bcd2bin(tmp); 391 t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1; 392 t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f); 393 tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f; 394 t->tm_mon = bcd2bin(tmp) - 1; 395 396 /* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */ 397 t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100; 398 399 dev_dbg(dev, "%s secs=%d, mins=%d, " 400 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", 401 "read", t->tm_sec, t->tm_min, 402 t->tm_hour, t->tm_mday, 403 t->tm_mon, t->tm_year, t->tm_wday); 404 405 /* initial clock setting can be undefined */ 406 return rtc_valid_tm(t); 407} 408 409static int ds1307_set_time(struct device *dev, struct rtc_time *t) 410{ 411 struct ds1307 *ds1307 = dev_get_drvdata(dev); 412 int result; 413 int tmp; 414 u8 *buf = ds1307->regs; 415 416 dev_dbg(dev, "%s secs=%d, mins=%d, " 417 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", 418 "write", t->tm_sec, t->tm_min, 419 t->tm_hour, t->tm_mday, 420 t->tm_mon, t->tm_year, t->tm_wday); 421 422 buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec); 423 buf[DS1307_REG_MIN] = bin2bcd(t->tm_min); 424 buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour); 425 buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1); 426 buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday); 427 buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1); 428 429 /* assume 20YY not 19YY */ 430 tmp = t->tm_year - 100; 431 buf[DS1307_REG_YEAR] = bin2bcd(tmp); 432 433 switch (ds1307->type) { 434 case ds_1337: 435 case ds_1339: 436 case ds_3231: 437 buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY; 438 break; 439 case ds_1340: 440 buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN 441 | DS1340_BIT_CENTURY; 442 break; 443 case mcp794xx: 444 /* 445 * these bits were cleared when preparing the date/time 446 * values and need to be set again before writing the 447 * buffer out to the device. 448 */ 449 buf[DS1307_REG_SECS] |= MCP794XX_BIT_ST; 450 buf[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN; 451 break; 452 default: 453 break; 454 } 455 456 dev_dbg(dev, "%s: %7ph\n", "write", buf); 457 458 result = ds1307->write_block_data(ds1307->client, 459 ds1307->offset, 7, buf); 460 if (result < 0) { 461 dev_err(dev, "%s error %d\n", "write", result); 462 return result; 463 } 464 return 0; 465} 466 467static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t) 468{ 469 struct i2c_client *client = to_i2c_client(dev); 470 struct ds1307 *ds1307 = i2c_get_clientdata(client); 471 int ret; 472 473 if (!test_bit(HAS_ALARM, &ds1307->flags)) 474 return -EINVAL; 475 476 /* read all ALARM1, ALARM2, and status registers at once */ 477 ret = ds1307->read_block_data(client, 478 DS1339_REG_ALARM1_SECS, 9, ds1307->regs); 479 if (ret != 9) { 480 dev_err(dev, "%s error %d\n", "alarm read", ret); 481 return -EIO; 482 } 483 484 dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n", 485 "alarm read", 486 ds1307->regs[0], ds1307->regs[1], 487 ds1307->regs[2], ds1307->regs[3], 488 ds1307->regs[4], ds1307->regs[5], 489 ds1307->regs[6], ds1307->regs[7], 490 ds1307->regs[8]); 491 492 /* 493 * report alarm time (ALARM1); assume 24 hour and day-of-month modes, 494 * and that all four fields are checked matches 495 */ 496 t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f); 497 t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f); 498 t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f); 499 t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f); 500 t->time.tm_mon = -1; 501 t->time.tm_year = -1; 502 t->time.tm_wday = -1; 503 t->time.tm_yday = -1; 504 t->time.tm_isdst = -1; 505 506 /* ... and status */ 507 t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE); 508 t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I); 509 510 dev_dbg(dev, "%s secs=%d, mins=%d, " 511 "hours=%d, mday=%d, enabled=%d, pending=%d\n", 512 "alarm read", t->time.tm_sec, t->time.tm_min, 513 t->time.tm_hour, t->time.tm_mday, 514 t->enabled, t->pending); 515 516 return 0; 517} 518 519static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t) 520{ 521 struct i2c_client *client = to_i2c_client(dev); 522 struct ds1307 *ds1307 = i2c_get_clientdata(client); 523 unsigned char *buf = ds1307->regs; 524 u8 control, status; 525 int ret; 526 527 if (!test_bit(HAS_ALARM, &ds1307->flags)) 528 return -EINVAL; 529 530 dev_dbg(dev, "%s secs=%d, mins=%d, " 531 "hours=%d, mday=%d, enabled=%d, pending=%d\n", 532 "alarm set", t->time.tm_sec, t->time.tm_min, 533 t->time.tm_hour, t->time.tm_mday, 534 t->enabled, t->pending); 535 536 /* read current status of both alarms and the chip */ 537 ret = ds1307->read_block_data(client, 538 DS1339_REG_ALARM1_SECS, 9, buf); 539 if (ret != 9) { 540 dev_err(dev, "%s error %d\n", "alarm write", ret); 541 return -EIO; 542 } 543 control = ds1307->regs[7]; 544 status = ds1307->regs[8]; 545 546 dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n", 547 "alarm set (old status)", 548 ds1307->regs[0], ds1307->regs[1], 549 ds1307->regs[2], ds1307->regs[3], 550 ds1307->regs[4], ds1307->regs[5], 551 ds1307->regs[6], control, status); 552 553 /* set ALARM1, using 24 hour and day-of-month modes */ 554 buf[0] = bin2bcd(t->time.tm_sec); 555 buf[1] = bin2bcd(t->time.tm_min); 556 buf[2] = bin2bcd(t->time.tm_hour); 557 buf[3] = bin2bcd(t->time.tm_mday); 558 559 /* set ALARM2 to non-garbage */ 560 buf[4] = 0; 561 buf[5] = 0; 562 buf[6] = 0; 563 564 /* optionally enable ALARM1 */ 565 buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE); 566 if (t->enabled) { 567 dev_dbg(dev, "alarm IRQ armed\n"); 568 buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */ 569 } 570 buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I); 571 572 ret = ds1307->write_block_data(client, 573 DS1339_REG_ALARM1_SECS, 9, buf); 574 if (ret < 0) { 575 dev_err(dev, "can't set alarm time\n"); 576 return ret; 577 } 578 579 return 0; 580} 581 582static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled) 583{ 584 struct i2c_client *client = to_i2c_client(dev); 585 struct ds1307 *ds1307 = i2c_get_clientdata(client); 586 int ret; 587 588 if (!test_bit(HAS_ALARM, &ds1307->flags)) 589 return -ENOTTY; 590 591 ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL); 592 if (ret < 0) 593 return ret; 594 595 if (enabled) 596 ret |= DS1337_BIT_A1IE; 597 else 598 ret &= ~DS1337_BIT_A1IE; 599 600 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret); 601 if (ret < 0) 602 return ret; 603 604 return 0; 605} 606 607static const struct rtc_class_ops ds13xx_rtc_ops = { 608 .read_time = ds1307_get_time, 609 .set_time = ds1307_set_time, 610 .read_alarm = ds1337_read_alarm, 611 .set_alarm = ds1337_set_alarm, 612 .alarm_irq_enable = ds1307_alarm_irq_enable, 613}; 614 615/*----------------------------------------------------------------------*/ 616 617/* 618 * Alarm support for mcp794xx devices. 619 */ 620 621#define MCP794XX_REG_CONTROL 0x07 622# define MCP794XX_BIT_ALM0_EN 0x10 623# define MCP794XX_BIT_ALM1_EN 0x20 624#define MCP794XX_REG_ALARM0_BASE 0x0a 625#define MCP794XX_REG_ALARM0_CTRL 0x0d 626#define MCP794XX_REG_ALARM1_BASE 0x11 627#define MCP794XX_REG_ALARM1_CTRL 0x14 628# define MCP794XX_BIT_ALMX_IF (1 << 3) 629# define MCP794XX_BIT_ALMX_C0 (1 << 4) 630# define MCP794XX_BIT_ALMX_C1 (1 << 5) 631# define MCP794XX_BIT_ALMX_C2 (1 << 6) 632# define MCP794XX_BIT_ALMX_POL (1 << 7) 633# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \ 634 MCP794XX_BIT_ALMX_C1 | \ 635 MCP794XX_BIT_ALMX_C2) 636 637static void mcp794xx_work(struct work_struct *work) 638{ 639 struct ds1307 *ds1307 = container_of(work, struct ds1307, work); 640 struct i2c_client *client = ds1307->client; 641 int reg, ret; 642 643 mutex_lock(&ds1307->rtc->ops_lock); 644 645 /* Check and clear alarm 0 interrupt flag. */ 646 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_ALARM0_CTRL); 647 if (reg < 0) 648 goto out; 649 if (!(reg & MCP794XX_BIT_ALMX_IF)) 650 goto out; 651 reg &= ~MCP794XX_BIT_ALMX_IF; 652 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_ALARM0_CTRL, reg); 653 if (ret < 0) 654 goto out; 655 656 /* Disable alarm 0. */ 657 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL); 658 if (reg < 0) 659 goto out; 660 reg &= ~MCP794XX_BIT_ALM0_EN; 661 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg); 662 if (ret < 0) 663 goto out; 664 665 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF); 666 667out: 668 if (test_bit(HAS_ALARM, &ds1307->flags)) 669 enable_irq(client->irq); 670 mutex_unlock(&ds1307->rtc->ops_lock); 671} 672 673static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t) 674{ 675 struct i2c_client *client = to_i2c_client(dev); 676 struct ds1307 *ds1307 = i2c_get_clientdata(client); 677 u8 *regs = ds1307->regs; 678 int ret; 679 680 if (!test_bit(HAS_ALARM, &ds1307->flags)) 681 return -EINVAL; 682 683 /* Read control and alarm 0 registers. */ 684 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs); 685 if (ret < 0) 686 return ret; 687 688 t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN); 689 690 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */ 691 t->time.tm_sec = bcd2bin(ds1307->regs[3] & 0x7f); 692 t->time.tm_min = bcd2bin(ds1307->regs[4] & 0x7f); 693 t->time.tm_hour = bcd2bin(ds1307->regs[5] & 0x3f); 694 t->time.tm_wday = bcd2bin(ds1307->regs[6] & 0x7) - 1; 695 t->time.tm_mday = bcd2bin(ds1307->regs[7] & 0x3f); 696 t->time.tm_mon = bcd2bin(ds1307->regs[8] & 0x1f) - 1; 697 t->time.tm_year = -1; 698 t->time.tm_yday = -1; 699 t->time.tm_isdst = -1; 700 701 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d " 702 "enabled=%d polarity=%d irq=%d match=%d\n", __func__, 703 t->time.tm_sec, t->time.tm_min, t->time.tm_hour, 704 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled, 705 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_POL), 706 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_IF), 707 (ds1307->regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4); 708 709 return 0; 710} 711 712static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t) 713{ 714 struct i2c_client *client = to_i2c_client(dev); 715 struct ds1307 *ds1307 = i2c_get_clientdata(client); 716 unsigned char *regs = ds1307->regs; 717 int ret; 718 719 if (!test_bit(HAS_ALARM, &ds1307->flags)) 720 return -EINVAL; 721 722 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d " 723 "enabled=%d pending=%d\n", __func__, 724 t->time.tm_sec, t->time.tm_min, t->time.tm_hour, 725 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, 726 t->enabled, t->pending); 727 728 /* Read control and alarm 0 registers. */ 729 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs); 730 if (ret < 0) 731 return ret; 732 733 /* Set alarm 0, using 24-hour and day-of-month modes. */ 734 regs[3] = bin2bcd(t->time.tm_sec); 735 regs[4] = bin2bcd(t->time.tm_min); 736 regs[5] = bin2bcd(t->time.tm_hour); 737 regs[6] = bin2bcd(t->time.tm_wday) + 1; 738 regs[7] = bin2bcd(t->time.tm_mday); 739 regs[8] = bin2bcd(t->time.tm_mon) + 1; 740 741 /* Clear the alarm 0 interrupt flag. */ 742 regs[6] &= ~MCP794XX_BIT_ALMX_IF; 743 /* Set alarm match: second, minute, hour, day, date, month. */ 744 regs[6] |= MCP794XX_MSK_ALMX_MATCH; 745 746 if (t->enabled) 747 regs[0] |= MCP794XX_BIT_ALM0_EN; 748 else 749 regs[0] &= ~MCP794XX_BIT_ALM0_EN; 750 751 ret = ds1307->write_block_data(client, MCP794XX_REG_CONTROL, 10, regs); 752 if (ret < 0) 753 return ret; 754 755 return 0; 756} 757 758static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled) 759{ 760 struct i2c_client *client = to_i2c_client(dev); 761 struct ds1307 *ds1307 = i2c_get_clientdata(client); 762 int reg; 763 764 if (!test_bit(HAS_ALARM, &ds1307->flags)) 765 return -EINVAL; 766 767 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL); 768 if (reg < 0) 769 return reg; 770 771 if (enabled) 772 reg |= MCP794XX_BIT_ALM0_EN; 773 else 774 reg &= ~MCP794XX_BIT_ALM0_EN; 775 776 return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg); 777} 778 779static const struct rtc_class_ops mcp794xx_rtc_ops = { 780 .read_time = ds1307_get_time, 781 .set_time = ds1307_set_time, 782 .read_alarm = mcp794xx_read_alarm, 783 .set_alarm = mcp794xx_set_alarm, 784 .alarm_irq_enable = mcp794xx_alarm_irq_enable, 785}; 786 787/*----------------------------------------------------------------------*/ 788 789static ssize_t 790ds1307_nvram_read(struct file *filp, struct kobject *kobj, 791 struct bin_attribute *attr, 792 char *buf, loff_t off, size_t count) 793{ 794 struct i2c_client *client; 795 struct ds1307 *ds1307; 796 int result; 797 798 client = kobj_to_i2c_client(kobj); 799 ds1307 = i2c_get_clientdata(client); 800 801 if (unlikely(off >= ds1307->nvram->size)) 802 return 0; 803 if ((off + count) > ds1307->nvram->size) 804 count = ds1307->nvram->size - off; 805 if (unlikely(!count)) 806 return count; 807 808 result = ds1307->read_block_data(client, ds1307->nvram_offset + off, 809 count, buf); 810 if (result < 0) 811 dev_err(&client->dev, "%s error %d\n", "nvram read", result); 812 return result; 813} 814 815static ssize_t 816ds1307_nvram_write(struct file *filp, struct kobject *kobj, 817 struct bin_attribute *attr, 818 char *buf, loff_t off, size_t count) 819{ 820 struct i2c_client *client; 821 struct ds1307 *ds1307; 822 int result; 823 824 client = kobj_to_i2c_client(kobj); 825 ds1307 = i2c_get_clientdata(client); 826 827 if (unlikely(off >= ds1307->nvram->size)) 828 return -EFBIG; 829 if ((off + count) > ds1307->nvram->size) 830 count = ds1307->nvram->size - off; 831 if (unlikely(!count)) 832 return count; 833 834 result = ds1307->write_block_data(client, ds1307->nvram_offset + off, 835 count, buf); 836 if (result < 0) { 837 dev_err(&client->dev, "%s error %d\n", "nvram write", result); 838 return result; 839 } 840 return count; 841} 842 843 844/*----------------------------------------------------------------------*/ 845 846static u8 do_trickle_setup_ds1339(struct i2c_client *client, 847 uint32_t ohms, bool diode) 848{ 849 u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE : 850 DS1307_TRICKLE_CHARGER_NO_DIODE; 851 852 switch (ohms) { 853 case 250: 854 setup |= DS1307_TRICKLE_CHARGER_250_OHM; 855 break; 856 case 2000: 857 setup |= DS1307_TRICKLE_CHARGER_2K_OHM; 858 break; 859 case 4000: 860 setup |= DS1307_TRICKLE_CHARGER_4K_OHM; 861 break; 862 default: 863 dev_warn(&client->dev, 864 "Unsupported ohm value %u in dt\n", ohms); 865 return 0; 866 } 867 return setup; 868} 869 870static void ds1307_trickle_of_init(struct i2c_client *client, 871 struct chip_desc *chip) 872{ 873 uint32_t ohms = 0; 874 bool diode = true; 875 876 if (!chip->do_trickle_setup) 877 goto out; 878 if (of_property_read_u32(client->dev.of_node, "trickle-resistor-ohms" , &ohms)) 879 goto out; 880 if (of_property_read_bool(client->dev.of_node, "trickle-diode-disable")) 881 diode = false; 882 chip->trickle_charger_setup = chip->do_trickle_setup(client, 883 ohms, diode); 884out: 885 return; 886} 887 888static int ds1307_probe(struct i2c_client *client, 889 const struct i2c_device_id *id) 890{ 891 struct ds1307 *ds1307; 892 int err = -ENODEV; 893 int tmp; 894 struct chip_desc *chip = &chips[id->driver_data]; 895 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); 896 bool want_irq = false; 897 unsigned char *buf; 898 struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev); 899 static const int bbsqi_bitpos[] = { 900 [ds_1337] = 0, 901 [ds_1339] = DS1339_BIT_BBSQI, 902 [ds_3231] = DS3231_BIT_BBSQW, 903 }; 904 const struct rtc_class_ops *rtc_ops = &ds13xx_rtc_ops; 905 906 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA) 907 && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) 908 return -EIO; 909 910 ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL); 911 if (!ds1307) 912 return -ENOMEM; 913 914 i2c_set_clientdata(client, ds1307); 915 916 ds1307->client = client; 917 ds1307->type = id->driver_data; 918 919 if (!pdata && client->dev.of_node) 920 ds1307_trickle_of_init(client, chip); 921 else if (pdata && pdata->trickle_charger_setup) 922 chip->trickle_charger_setup = pdata->trickle_charger_setup; 923 924 if (chip->trickle_charger_setup && chip->trickle_charger_reg) { 925 dev_dbg(&client->dev, "writing trickle charger info 0x%x to 0x%x\n", 926 DS13XX_TRICKLE_CHARGER_MAGIC | chip->trickle_charger_setup, 927 chip->trickle_charger_reg); 928 i2c_smbus_write_byte_data(client, chip->trickle_charger_reg, 929 DS13XX_TRICKLE_CHARGER_MAGIC | 930 chip->trickle_charger_setup); 931 } 932 933 buf = ds1307->regs; 934 if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { 935 ds1307->read_block_data = ds1307_native_smbus_read_block_data; 936 ds1307->write_block_data = ds1307_native_smbus_write_block_data; 937 } else { 938 ds1307->read_block_data = ds1307_read_block_data; 939 ds1307->write_block_data = ds1307_write_block_data; 940 } 941 942 switch (ds1307->type) { 943 case ds_1337: 944 case ds_1339: 945 case ds_3231: 946 /* get registers that the "rtc" read below won't read... */ 947 tmp = ds1307->read_block_data(ds1307->client, 948 DS1337_REG_CONTROL, 2, buf); 949 if (tmp != 2) { 950 dev_dbg(&client->dev, "read error %d\n", tmp); 951 err = -EIO; 952 goto exit; 953 } 954 955 /* oscillator off? turn it on, so clock can tick. */ 956 if (ds1307->regs[0] & DS1337_BIT_nEOSC) 957 ds1307->regs[0] &= ~DS1337_BIT_nEOSC; 958 959 /* 960 * Using IRQ? Disable the square wave and both alarms. 961 * For some variants, be sure alarms can trigger when we're 962 * running on Vbackup (BBSQI/BBSQW) 963 */ 964 if (ds1307->client->irq > 0 && chip->alarm) { 965 INIT_WORK(&ds1307->work, ds1307_work); 966 967 ds1307->regs[0] |= DS1337_BIT_INTCN 968 | bbsqi_bitpos[ds1307->type]; 969 ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE); 970 971 want_irq = true; 972 } 973 974 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, 975 ds1307->regs[0]); 976 977 /* oscillator fault? clear flag, and warn */ 978 if (ds1307->regs[1] & DS1337_BIT_OSF) { 979 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, 980 ds1307->regs[1] & ~DS1337_BIT_OSF); 981 dev_warn(&client->dev, "SET TIME!\n"); 982 } 983 break; 984 985 case rx_8025: 986 tmp = i2c_smbus_read_i2c_block_data(ds1307->client, 987 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf); 988 if (tmp != 2) { 989 dev_dbg(&client->dev, "read error %d\n", tmp); 990 err = -EIO; 991 goto exit; 992 } 993 994 /* oscillator off? turn it on, so clock can tick. */ 995 if (!(ds1307->regs[1] & RX8025_BIT_XST)) { 996 ds1307->regs[1] |= RX8025_BIT_XST; 997 i2c_smbus_write_byte_data(client, 998 RX8025_REG_CTRL2 << 4 | 0x08, 999 ds1307->regs[1]); 1000 dev_warn(&client->dev, 1001 "oscillator stop detected - SET TIME!\n"); 1002 } 1003 1004 if (ds1307->regs[1] & RX8025_BIT_PON) { 1005 ds1307->regs[1] &= ~RX8025_BIT_PON; 1006 i2c_smbus_write_byte_data(client, 1007 RX8025_REG_CTRL2 << 4 | 0x08, 1008 ds1307->regs[1]); 1009 dev_warn(&client->dev, "power-on detected\n"); 1010 } 1011 1012 if (ds1307->regs[1] & RX8025_BIT_VDET) { 1013 ds1307->regs[1] &= ~RX8025_BIT_VDET; 1014 i2c_smbus_write_byte_data(client, 1015 RX8025_REG_CTRL2 << 4 | 0x08, 1016 ds1307->regs[1]); 1017 dev_warn(&client->dev, "voltage drop detected\n"); 1018 } 1019 1020 /* make sure we are running in 24hour mode */ 1021 if (!(ds1307->regs[0] & RX8025_BIT_2412)) { 1022 u8 hour; 1023 1024 /* switch to 24 hour mode */ 1025 i2c_smbus_write_byte_data(client, 1026 RX8025_REG_CTRL1 << 4 | 0x08, 1027 ds1307->regs[0] | 1028 RX8025_BIT_2412); 1029 1030 tmp = i2c_smbus_read_i2c_block_data(ds1307->client, 1031 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf); 1032 if (tmp != 2) { 1033 dev_dbg(&client->dev, "read error %d\n", tmp); 1034 err = -EIO; 1035 goto exit; 1036 } 1037 1038 /* correct hour */ 1039 hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]); 1040 if (hour == 12) 1041 hour = 0; 1042 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) 1043 hour += 12; 1044 1045 i2c_smbus_write_byte_data(client, 1046 DS1307_REG_HOUR << 4 | 0x08, 1047 hour); 1048 } 1049 break; 1050 case ds_1388: 1051 ds1307->offset = 1; /* Seconds starts at 1 */ 1052 break; 1053 case mcp794xx: 1054 rtc_ops = &mcp794xx_rtc_ops; 1055 if (ds1307->client->irq > 0 && chip->alarm) { 1056 INIT_WORK(&ds1307->work, mcp794xx_work); 1057 want_irq = true; 1058 } 1059 break; 1060 default: 1061 break; 1062 } 1063 1064read_rtc: 1065 /* read RTC registers */ 1066 tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf); 1067 if (tmp != 8) { 1068 dev_dbg(&client->dev, "read error %d\n", tmp); 1069 err = -EIO; 1070 goto exit; 1071 } 1072 1073 /* 1074 * minimal sanity checking; some chips (like DS1340) don't 1075 * specify the extra bits as must-be-zero, but there are 1076 * still a few values that are clearly out-of-range. 1077 */ 1078 tmp = ds1307->regs[DS1307_REG_SECS]; 1079 switch (ds1307->type) { 1080 case ds_1307: 1081 case m41t00: 1082 /* clock halted? turn it on, so clock can tick. */ 1083 if (tmp & DS1307_BIT_CH) { 1084 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); 1085 dev_warn(&client->dev, "SET TIME!\n"); 1086 goto read_rtc; 1087 } 1088 break; 1089 case ds_1338: 1090 /* clock halted? turn it on, so clock can tick. */ 1091 if (tmp & DS1307_BIT_CH) 1092 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); 1093 1094 /* oscillator fault? clear flag, and warn */ 1095 if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) { 1096 i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL, 1097 ds1307->regs[DS1307_REG_CONTROL] 1098 & ~DS1338_BIT_OSF); 1099 dev_warn(&client->dev, "SET TIME!\n"); 1100 goto read_rtc; 1101 } 1102 break; 1103 case ds_1340: 1104 /* clock halted? turn it on, so clock can tick. */ 1105 if (tmp & DS1340_BIT_nEOSC) 1106 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); 1107 1108 tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG); 1109 if (tmp < 0) { 1110 dev_dbg(&client->dev, "read error %d\n", tmp); 1111 err = -EIO; 1112 goto exit; 1113 } 1114 1115 /* oscillator fault? clear flag, and warn */ 1116 if (tmp & DS1340_BIT_OSF) { 1117 i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0); 1118 dev_warn(&client->dev, "SET TIME!\n"); 1119 } 1120 break; 1121 case mcp794xx: 1122 /* make sure that the backup battery is enabled */ 1123 if (!(ds1307->regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) { 1124 i2c_smbus_write_byte_data(client, DS1307_REG_WDAY, 1125 ds1307->regs[DS1307_REG_WDAY] 1126 | MCP794XX_BIT_VBATEN); 1127 } 1128 1129 /* clock halted? turn it on, so clock can tick. */ 1130 if (!(tmp & MCP794XX_BIT_ST)) { 1131 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 1132 MCP794XX_BIT_ST); 1133 dev_warn(&client->dev, "SET TIME!\n"); 1134 goto read_rtc; 1135 } 1136 1137 break; 1138 default: 1139 break; 1140 } 1141 1142 tmp = ds1307->regs[DS1307_REG_HOUR]; 1143 switch (ds1307->type) { 1144 case ds_1340: 1145 case m41t00: 1146 /* 1147 * NOTE: ignores century bits; fix before deploying 1148 * systems that will run through year 2100. 1149 */ 1150 break; 1151 case rx_8025: 1152 break; 1153 default: 1154 if (!(tmp & DS1307_BIT_12HR)) 1155 break; 1156 1157 /* 1158 * Be sure we're in 24 hour mode. Multi-master systems 1159 * take note... 1160 */ 1161 tmp = bcd2bin(tmp & 0x1f); 1162 if (tmp == 12) 1163 tmp = 0; 1164 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) 1165 tmp += 12; 1166 i2c_smbus_write_byte_data(client, 1167 ds1307->offset + DS1307_REG_HOUR, 1168 bin2bcd(tmp)); 1169 } 1170 1171 device_set_wakeup_capable(&client->dev, want_irq); 1172 ds1307->rtc = devm_rtc_device_register(&client->dev, client->name, 1173 rtc_ops, THIS_MODULE); 1174 if (IS_ERR(ds1307->rtc)) { 1175 return PTR_ERR(ds1307->rtc); 1176 } 1177 1178 if (want_irq) { 1179 err = request_irq(client->irq, ds1307_irq, IRQF_SHARED, 1180 ds1307->rtc->name, client); 1181 if (err) { 1182 client->irq = 0; 1183 dev_err(&client->dev, "unable to request IRQ!\n"); 1184 } else { 1185 1186 set_bit(HAS_ALARM, &ds1307->flags); 1187 dev_dbg(&client->dev, "got IRQ %d\n", client->irq); 1188 } 1189 } 1190 1191 if (chip->nvram_size) { 1192 1193 ds1307->nvram = devm_kzalloc(&client->dev, 1194 sizeof(struct bin_attribute), 1195 GFP_KERNEL); 1196 if (!ds1307->nvram) { 1197 dev_err(&client->dev, "cannot allocate memory for nvram sysfs\n"); 1198 } else { 1199 1200 ds1307->nvram->attr.name = "nvram"; 1201 ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR; 1202 1203 sysfs_bin_attr_init(ds1307->nvram); 1204 1205 ds1307->nvram->read = ds1307_nvram_read; 1206 ds1307->nvram->write = ds1307_nvram_write; 1207 ds1307->nvram->size = chip->nvram_size; 1208 ds1307->nvram_offset = chip->nvram_offset; 1209 1210 err = sysfs_create_bin_file(&client->dev.kobj, 1211 ds1307->nvram); 1212 if (err) { 1213 dev_err(&client->dev, 1214 "unable to create sysfs file: %s\n", 1215 ds1307->nvram->attr.name); 1216 } else { 1217 set_bit(HAS_NVRAM, &ds1307->flags); 1218 dev_info(&client->dev, "%zu bytes nvram\n", 1219 ds1307->nvram->size); 1220 } 1221 } 1222 } 1223 1224 return 0; 1225 1226exit: 1227 return err; 1228} 1229 1230static int ds1307_remove(struct i2c_client *client) 1231{ 1232 struct ds1307 *ds1307 = i2c_get_clientdata(client); 1233 1234 if (test_and_clear_bit(HAS_ALARM, &ds1307->flags)) { 1235 free_irq(client->irq, client); 1236 cancel_work_sync(&ds1307->work); 1237 } 1238 1239 if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags)) 1240 sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram); 1241 1242 return 0; 1243} 1244 1245static struct i2c_driver ds1307_driver = { 1246 .driver = { 1247 .name = "rtc-ds1307", 1248 .owner = THIS_MODULE, 1249 }, 1250 .probe = ds1307_probe, 1251 .remove = ds1307_remove, 1252 .id_table = ds1307_id, 1253}; 1254 1255module_i2c_driver(ds1307_driver); 1256 1257MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips"); 1258MODULE_LICENSE("GPL"); 1259