1/*
2 * Samsung SoC USB 1.1/2.0 PHY driver - S5PV210 support
3 *
4 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
5 * Authors: Kamil Debski <k.debski@samsung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <linux/delay.h>
13#include <linux/io.h>
14#include <linux/phy/phy.h>
15#include "phy-samsung-usb2.h"
16
17/* Exynos USB PHY registers */
18
19/* PHY power control */
20#define S5PV210_UPHYPWR			0x0
21
22#define S5PV210_UPHYPWR_PHY0_SUSPEND	BIT(0)
23#define S5PV210_UPHYPWR_PHY0_PWR	BIT(3)
24#define S5PV210_UPHYPWR_PHY0_OTG_PWR	BIT(4)
25#define S5PV210_UPHYPWR_PHY0	( \
26	S5PV210_UPHYPWR_PHY0_SUSPEND | \
27	S5PV210_UPHYPWR_PHY0_PWR | \
28	S5PV210_UPHYPWR_PHY0_OTG_PWR)
29
30#define S5PV210_UPHYPWR_PHY1_SUSPEND	BIT(6)
31#define S5PV210_UPHYPWR_PHY1_PWR	BIT(7)
32#define S5PV210_UPHYPWR_PHY1 ( \
33	S5PV210_UPHYPWR_PHY1_SUSPEND | \
34	S5PV210_UPHYPWR_PHY1_PWR)
35
36/* PHY clock control */
37#define S5PV210_UPHYCLK			0x4
38
39#define S5PV210_UPHYCLK_PHYFSEL_MASK	(0x3 << 0)
40#define S5PV210_UPHYCLK_PHYFSEL_48MHZ	(0x0 << 0)
41#define S5PV210_UPHYCLK_PHYFSEL_24MHZ	(0x3 << 0)
42#define S5PV210_UPHYCLK_PHYFSEL_12MHZ	(0x2 << 0)
43
44#define S5PV210_UPHYCLK_PHY0_ID_PULLUP	BIT(2)
45#define S5PV210_UPHYCLK_PHY0_COMMON_ON	BIT(4)
46#define S5PV210_UPHYCLK_PHY1_COMMON_ON	BIT(7)
47
48/* PHY reset control */
49#define S5PV210_UPHYRST			0x8
50
51#define S5PV210_URSTCON_PHY0		BIT(0)
52#define S5PV210_URSTCON_OTG_HLINK	BIT(1)
53#define S5PV210_URSTCON_OTG_PHYLINK	BIT(2)
54#define S5PV210_URSTCON_PHY1_ALL	BIT(3)
55#define S5PV210_URSTCON_HOST_LINK_ALL	BIT(4)
56
57/* Isolation, configured in the power management unit */
58#define S5PV210_USB_ISOL_OFFSET		0x680c
59#define S5PV210_USB_ISOL_DEVICE		BIT(0)
60#define S5PV210_USB_ISOL_HOST		BIT(1)
61
62
63enum s5pv210_phy_id {
64	S5PV210_DEVICE,
65	S5PV210_HOST,
66	S5PV210_NUM_PHYS,
67};
68
69/*
70 * s5pv210_rate_to_clk() converts the supplied clock rate to the value that
71 * can be written to the phy register.
72 */
73static int s5pv210_rate_to_clk(unsigned long rate, u32 *reg)
74{
75	switch (rate) {
76	case 12 * MHZ:
77		*reg = S5PV210_UPHYCLK_PHYFSEL_12MHZ;
78		break;
79	case 24 * MHZ:
80		*reg = S5PV210_UPHYCLK_PHYFSEL_24MHZ;
81		break;
82	case 48 * MHZ:
83		*reg = S5PV210_UPHYCLK_PHYFSEL_48MHZ;
84		break;
85	default:
86		return -EINVAL;
87	}
88
89	return 0;
90}
91
92static void s5pv210_isol(struct samsung_usb2_phy_instance *inst, bool on)
93{
94	struct samsung_usb2_phy_driver *drv = inst->drv;
95	u32 mask;
96
97	switch (inst->cfg->id) {
98	case S5PV210_DEVICE:
99		mask = S5PV210_USB_ISOL_DEVICE;
100		break;
101	case S5PV210_HOST:
102		mask = S5PV210_USB_ISOL_HOST;
103		break;
104	default:
105		return;
106	};
107
108	regmap_update_bits(drv->reg_pmu, S5PV210_USB_ISOL_OFFSET,
109							mask, on ? 0 : mask);
110}
111
112static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
113{
114	struct samsung_usb2_phy_driver *drv = inst->drv;
115	u32 rstbits = 0;
116	u32 phypwr = 0;
117	u32 rst;
118	u32 pwr;
119
120	switch (inst->cfg->id) {
121	case S5PV210_DEVICE:
122		phypwr =	S5PV210_UPHYPWR_PHY0;
123		rstbits =	S5PV210_URSTCON_PHY0;
124		break;
125	case S5PV210_HOST:
126		phypwr =	S5PV210_UPHYPWR_PHY1;
127		rstbits =	S5PV210_URSTCON_PHY1_ALL |
128				S5PV210_URSTCON_HOST_LINK_ALL;
129		break;
130	};
131
132	if (on) {
133		writel(drv->ref_reg_val, drv->reg_phy + S5PV210_UPHYCLK);
134
135		pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
136		pwr &= ~phypwr;
137		writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
138
139		rst = readl(drv->reg_phy + S5PV210_UPHYRST);
140		rst |= rstbits;
141		writel(rst, drv->reg_phy + S5PV210_UPHYRST);
142		udelay(10);
143		rst &= ~rstbits;
144		writel(rst, drv->reg_phy + S5PV210_UPHYRST);
145	} else {
146		pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
147		pwr |= phypwr;
148		writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
149	}
150}
151
152static int s5pv210_power_on(struct samsung_usb2_phy_instance *inst)
153{
154	s5pv210_isol(inst, 0);
155	s5pv210_phy_pwr(inst, 1);
156
157	return 0;
158}
159
160static int s5pv210_power_off(struct samsung_usb2_phy_instance *inst)
161{
162	s5pv210_phy_pwr(inst, 0);
163	s5pv210_isol(inst, 1);
164
165	return 0;
166}
167
168static const struct samsung_usb2_common_phy s5pv210_phys[S5PV210_NUM_PHYS] = {
169	[S5PV210_DEVICE] = {
170		.label		= "device",
171		.id		= S5PV210_DEVICE,
172		.power_on	= s5pv210_power_on,
173		.power_off	= s5pv210_power_off,
174	},
175	[S5PV210_HOST] = {
176		.label		= "host",
177		.id		= S5PV210_HOST,
178		.power_on	= s5pv210_power_on,
179		.power_off	= s5pv210_power_off,
180	},
181};
182
183const struct samsung_usb2_phy_config s5pv210_usb2_phy_config = {
184	.num_phys	= ARRAY_SIZE(s5pv210_phys),
185	.phys		= s5pv210_phys,
186	.rate_to_clk	= s5pv210_rate_to_clk,
187};
188