1/* Intel Ethernet Switch Host Interface Driver 2 * Copyright(c) 2013 - 2015 Intel Corporation. 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms and conditions of the GNU General Public License, 6 * version 2, as published by the Free Software Foundation. 7 * 8 * This program is distributed in the hope it will be useful, but WITHOUT 9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 11 * more details. 12 * 13 * The full GNU General Public License is included in this distribution in 14 * the file called "COPYING". 15 * 16 * Contact Information: 17 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> 18 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 19 */ 20 21#include "fm10k.h" 22 23#ifdef CONFIG_DCB 24/** 25 * fm10k_dcbnl_ieee_getets - get the ETS configuration for the device 26 * @dev: netdev interface for the device 27 * @ets: ETS structure to push configuration to 28 **/ 29static int fm10k_dcbnl_ieee_getets(struct net_device *dev, struct ieee_ets *ets) 30{ 31 int i; 32 33 /* we support 8 TCs in all modes */ 34 ets->ets_cap = IEEE_8021QAZ_MAX_TCS; 35 ets->cbs = 0; 36 37 /* we only support strict priority and cannot do traffic shaping */ 38 memset(ets->tc_tx_bw, 0, sizeof(ets->tc_tx_bw)); 39 memset(ets->tc_rx_bw, 0, sizeof(ets->tc_rx_bw)); 40 memset(ets->tc_tsa, IEEE_8021QAZ_TSA_STRICT, sizeof(ets->tc_tsa)); 41 42 /* populate the prio map based on the netdev */ 43 for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) 44 ets->prio_tc[i] = netdev_get_prio_tc_map(dev, i); 45 46 return 0; 47} 48 49/** 50 * fm10k_dcbnl_ieee_setets - set the ETS configuration for the device 51 * @dev: netdev interface for the device 52 * @ets: ETS structure to pull configuration from 53 **/ 54static int fm10k_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets) 55{ 56 u8 num_tc = 0; 57 int i, err; 58 59 /* verify type and determine num_tcs needed */ 60 for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { 61 if (ets->tc_tx_bw[i] || ets->tc_rx_bw[i]) 62 return -EINVAL; 63 if (ets->tc_tsa[i] != IEEE_8021QAZ_TSA_STRICT) 64 return -EINVAL; 65 if (ets->prio_tc[i] > num_tc) 66 num_tc = ets->prio_tc[i]; 67 } 68 69 /* if requested TC is greater than 0 then num_tcs is max + 1 */ 70 if (num_tc) 71 num_tc++; 72 73 if (num_tc > IEEE_8021QAZ_MAX_TCS) 74 return -EINVAL; 75 76 /* update TC hardware mapping if necessary */ 77 if (num_tc != netdev_get_num_tc(dev)) { 78 err = fm10k_setup_tc(dev, num_tc); 79 if (err) 80 return err; 81 } 82 83 /* update priority mapping */ 84 for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) 85 netdev_set_prio_tc_map(dev, i, ets->prio_tc[i]); 86 87 return 0; 88} 89 90/** 91 * fm10k_dcbnl_ieee_getpfc - get the PFC configuration for the device 92 * @dev: netdev interface for the device 93 * @pfc: PFC structure to push configuration to 94 **/ 95static int fm10k_dcbnl_ieee_getpfc(struct net_device *dev, struct ieee_pfc *pfc) 96{ 97 struct fm10k_intfc *interface = netdev_priv(dev); 98 99 /* record flow control max count and state of TCs */ 100 pfc->pfc_cap = IEEE_8021QAZ_MAX_TCS; 101 pfc->pfc_en = interface->pfc_en; 102 103 return 0; 104} 105 106/** 107 * fm10k_dcbnl_ieee_setpfc - set the PFC configuration for the device 108 * @dev: netdev interface for the device 109 * @pfc: PFC structure to pull configuration from 110 **/ 111static int fm10k_dcbnl_ieee_setpfc(struct net_device *dev, struct ieee_pfc *pfc) 112{ 113 struct fm10k_intfc *interface = netdev_priv(dev); 114 115 /* record PFC configuration to interface */ 116 interface->pfc_en = pfc->pfc_en; 117 118 /* if we are running update the drop_en state for all queues */ 119 if (netif_running(dev)) 120 fm10k_update_rx_drop_en(interface); 121 122 return 0; 123} 124 125/** 126 * fm10k_dcbnl_ieee_getdcbx - get the DCBX configuration for the device 127 * @dev: netdev interface for the device 128 * 129 * Returns that we support only IEEE DCB for this interface 130 **/ 131static u8 fm10k_dcbnl_getdcbx(struct net_device __always_unused *dev) 132{ 133 return DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE; 134} 135 136/** 137 * fm10k_dcbnl_ieee_setdcbx - get the DCBX configuration for the device 138 * @dev: netdev interface for the device 139 * @mode: new mode for this device 140 * 141 * Returns error on attempt to enable anything but IEEE DCB for this interface 142 **/ 143static u8 fm10k_dcbnl_setdcbx(struct net_device __always_unused *dev, u8 mode) 144{ 145 return (mode != (DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE)) ? 1 : 0; 146} 147 148static const struct dcbnl_rtnl_ops fm10k_dcbnl_ops = { 149 .ieee_getets = fm10k_dcbnl_ieee_getets, 150 .ieee_setets = fm10k_dcbnl_ieee_setets, 151 .ieee_getpfc = fm10k_dcbnl_ieee_getpfc, 152 .ieee_setpfc = fm10k_dcbnl_ieee_setpfc, 153 154 .getdcbx = fm10k_dcbnl_getdcbx, 155 .setdcbx = fm10k_dcbnl_setdcbx, 156}; 157 158#endif /* CONFIG_DCB */ 159/** 160 * fm10k_dcbnl_set_ops - Configures dcbnl ops pointer for netdev 161 * @dev: netdev interface for the device 162 * 163 * Enables PF for DCB by assigning DCBNL ops pointer. 164 **/ 165void fm10k_dcbnl_set_ops(struct net_device *dev) 166{ 167#ifdef CONFIG_DCB 168 struct fm10k_intfc *interface = netdev_priv(dev); 169 struct fm10k_hw *hw = &interface->hw; 170 171 if (hw->mac.type == fm10k_mac_pf) 172 dev->dcbnl_ops = &fm10k_dcbnl_ops; 173#endif /* CONFIG_DCB */ 174} 175